Mair Multihead Tube Cutting Machine Tra3000/7/7/Car ... nakup rabljenega (94.061)

Stanje: rabljeno, MULTI-HEAD TUBE CUTTING MACHINE TRA3000/7/7/CAR + RA1 Manufactured by MAIR SCOPE OF SUPPLY 1. Loading table equipped with: - Motorized sling bundle loader for complete bundle loading - Side chain conveyor for feeding tubes individually - Upper support with vertical adjustment (prevents dual loading when working with small diameters) - Length stop and tube loader 2. TRA3000 cutting machine with: - 7 independent cutting heads - All cutting heads are independently liftable - Linear guideway with scale for cutting head positioning - Centralized tube transport system with produciton cycle adjustment 3. Individual collecting cradle RA1, including: - Independent cradles for collecting cut tubes - Lateral cradle dividers to adapt cradle length to tube length - Motorized endless slings for collecting soft tubes 4. Main electrical cabinet and operator control panel 5. Safety barriers around the machine, light curtains, and emergency line. Note: The owner installed safety barriers to ensure the machine complies with "safety conformity" standards. TECHNICAL SPECIFICATIONS Manufacturer: MAIR RESEARCH Model: TRA 3000/7/7/CAR + RA1 Annual maintenance: performed by MAIR Spain Maximum tube entry length: 7000 mm Bundle loader: 3 tons Maximum loading capacity: 3000 kg Round tubes (external Ø): 12-60 mm Square tubes (height x width): 12x12-50x50 mm (see note) Rectangular tubes (height x width): 12x16-60x40 mm (see note) Min.-max. thickness: 0.8 - 4.0 mm (depending on yield strength) Cutting lengths: 330-6900 mm Itodpfeymax Esx Al Nof Maximum straightness tolerance: 1 mm/m Number of cutting heads: 7 Motor power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380/50 V/Hz, 3 phases Compressed air: Must be supplied filtered and lubricated at 6 bar. Total installed power: Approx. 21kW – 50Amp

Stanje: rabljeno, MULTI-HEAD PIPE CUTTING MACHINE TRA3000/7/8, manufactured by MAIR Itjdpoymaw Ujfx Al Nof Scope of supply: 1. Loading table with: - Motorized sling loader for loading a complete bundle - Side chain conveyor for feeding tubes one by one - Upper arm with vertical adjustment (to prevent loading two tubes at once when working with small diameters) - Longitudinal stop and tube loader 2. TRA3000 Cutting Machine: - 7 independent cutting heads - All heads can be raised independently - Linear guide with scale for positioning the cutting heads - Centralized tube transport system with production cycle adjustment 3. Double RA3 collection cradle, featuring: - Independent cradles for collecting cut tubes - Side spacers in the cradles to adjust the length to the tube - Endless motorized slings for gentle tube collection Note: The double cradle system allows packaging and strapping in cradle 1 while production continues, eliminating the need to stop the machine. 4. Main electrical cabinet and control panel. NOTE: - This machine has operated very few hours. - Mechanical condition is very good. - Only cleaning and repainting are required to be “like new.” Max. input tube length: 8,000 mm Bundle loader capacity: 3 tons Max. loading capacity: 3,000 kg Round tubes (outer Ø): 12–60 mm Square tubes (HxW): 12x12–40x40 mm Rectangular tubes (HxW): 12x16–50x30 mm Min.–max. wall thickness: 0.8–3.0 mm (depending on yield strength) Cutting lengths: 330–7,900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motor power: 2.2 kW Cutting disc diameter: 300 mm

Stanje: rabljeno, Večglava rezalna linija TRA2000/7/7, proizvajalca MAIR Vključuje: 1) Paketni podajalnik z dozirnikom cev/cev 2) Večglavni rezalni stroj s 7 rezalnimi glavami 3) Večkratno izhodno žlebišče 4) Električna upravljalna omara z napajanjem in krmiljenjem Po naročilu je možno izdelati tudi: 5) Izvozna žlebišče z dvojnim izhodom 6) Nov električni upravljalni panel s frekvenčnimi pretvorniki za rezalne motorje 7) Pokrov za zaščito pred hrupom in za varnost Največja dolžina cevi: 7.500 mm Itedpfjymaypjx Al Nof Največja nosilnost: 2.000 kg Okrogle cevi (zunanji premer): 12 - 50 mm Kvadratne cevi (višina x širina): 12×12 – 40×40 mm Pravokotne cevi (višina x širina): 12×16 – 50×30 mm Največja debelina: 2,5 mm Dolžina cevi za rezanje: 330 - 7.400 mm Število rezalnih glav: 7

Leto izdelave: 2019, stanje: rabljeno, High-precision automatic tube cutting machine TS72, manufactured by ADIGE Itjdpfoymangsx Al Njf Cuts round, square, rectangular, and flat oval tubes up to 102 mm in diameter. Efficient Production: - Program up to 4 different cutting lengths per tube - Seamless setup changes for small batch runs Organized Discharge: - Program up to 3 different discharge positions plus a scrap container. Uninterrupted Operation: - Automatic production changeovers without tools. - High-capacity bundle loader for up to 4,000 kg of material. Superior Cutting Quality: High precision, efficiency, and versatility for tube cutting operations. - Double jaw clamping for precise holding and high cutting accuracy. - Saw blade and jaws disengage during the return stroke to minimize wear. TECHNICAL DATA Working Range - Round tube cutting: 8 to 102 mm - Square tube cutting: from 10x10 up to 80x80 mm - Bar cutting: up to 40 mm - Cutting length: from 20 mm up to 3,000 mm Loading - Bundle loading: fully automatic - Discharge positions: 3 + 1 (scrap) Tools - Saw blade diameter: 200 to 350 mm General - Total installed power: 20 kW Round tube cutting: 8 to 102 mm Square tube cutting: 10x10 up to 80x80 mm Bar cutting: up to 40 mm Cutting length: 20 mm to 3,000 mm Saw blade diameter: 200 to 350 mm Bundle loading: fully automatic Discharge positions: 3 + 1 (scrap) Total installed power: 20 kW

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Serija: NS-HG Tip: Težka cevna obdelovalna naprava Funkcija posnemanja robov: Opcijsko Iedpfx Asww Upzjl Netf Območje moči: Obdelava okroglih cevi: 50 mm ~ 560 mm Obdelava kvadratnih cevi: 50 mm ~ 560 mm Maksimalna hitrost vpenjalne glave: 30 obr./min Teža stroja: 29 t Specifikacija napajanja: 380 VAC, 50 Hz Opcijsko nakladalno stojalo: Avtomatsko nakladalno stojalo s tremi vpenjalnimi glavami in verigo Opcijsko razkladalno stojalo: Avtomatsko razkladalno stojalo s tremi vpenjalnimi glavami in verigo Standard: Sistem 5000A, vključno z gnezdenjem, servo podporo (posnemanje robov), brezostankovno zadnje vpetje, votlo odstranjevanje prahu Opcije: Zaznavanje zvarov, varnostna ograja (svetlobna zavesa), steklo odporno na sevanje

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta laserja: vlakenski laser, laserska moč: 12.000 W, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Поддерживает резку стальных труб длиной до 12 м Оснащён полностью автоматизированной системой комплексной подачи и выгрузки Itjdpfx Asw A H T Aol Nsf Интеллектуальное решение «одна станция» для загрузки, резки и выгрузки, повышение производительности до 200% Поддержка множества технологических операций: фасонная резка (скош), замковка, резка, пробивка отверстий, формирование сварочных отверстий, вырезание отверстий под болты, маркировка и нанесение меток Лазерная мощность 12 000–20 000 Вт Перемещение по оси X 1 600 мм Перемещение по оси Y 1 900 мм Перемещение по оси Z 900 мм Поворот по оси A ±90° Поворот по оси C ±90° Перемещение по оси U 30 мм Перемещение по оси V 13 000 мм Точность позиционирования ±0,1 мм Максимальный размер обрабатываемого профиля 1 000 × 400 мм Максимально поддерживаемый вес 5 т Поддерживаемые профили двутавр, швеллер, балка I-типа

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, vrsta laserja: vlakenski laser, laserska moč: 3.000 W, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Typ: Dva sklíčidla Funkce drážky: Standardní Výkonové rozpětí: 3 kW, 6 kW Rozsah zpracování kruhových trubek: 10 mm ~ 160 mm Rozsah zpracování čtvercových trubek: 10 mm ~ 160 mm Maximální otáčky sklíčidla: 130 ot/min Hmotnost stroje: 3 t Napájecí specifikace: 380 V AC, 50 Hz Volitelný podavač: G16pro – automatické nakládání, G16pro – poloautomatické nakládání Iedpowwz Dlefx Al Njtf Volitelný vykladač: servopoháněný vykladač, pneumatický vykladač Standard: Systém 3000DE-DH, včetně optimalizace rozřezávání (nestingu), podpora servopohonů, pracho-těsnění (osa Y), pracho-těsnění (osa X), pracho-těsnění (osa Z), zadní duté odsávání karet, krátký odpadní materiál Volitelné: bezpečnostní oplocení (světelná závora), sklo s ochranou proti záření

Stanje: novo, Leto izdelave: 2025, Laser power: 6000 watts Round tube: 20 - 350 mm Square tube: 20 x 20 - 350 x 350 mm Rectangular tube: 20 x 20 - 350 x 350 mm Max. positioning accuracy X, Y axis: 0.05/1000 mm Max. positioning accuracy U axis: 0.05/1000 mm Itjdpfexgc Arox Al Njf Max. mild steel: 14 mm Max. stainless steel: 10 mm Max. aluminium: 10 mm Max. tube weight: 1200 kg Length: 17,296 mm Width: 4,271 mm Height: 2,933 mm Standard equipment Working range for tube diameter Round tube: 20 mm - 350 mm Square tube: 20 - 350 mm Rectangular tube: 20 x 20 mm - 350 x 350 mm Minimum clamping tube thickness: ≥1 mm Y-axis travel: 9100 mm Z-axis travel: 4000 mm X-axis travel: 400 mm Maximum loading length: 9200 mm Maximum unloading length: 6000 mm X,Y axis positioning accuracy: +/-0.05 mm/1000 mm X,Y axis repeat positioning accuracy: +/-0.05 mm/1000 mm Maximum rotational U-axis positioning speed: 100 RPM Maximum acceleration X/Y axis: 1.0 G X-axis rapid traverse speed: ≤50 m/min Maximum loading capacity per tube: ≤133 kg/m Machine operating temperature: 20℃–40℃

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, obratovalne ure: 10 h, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, proizvajalec krmilnikov: Bodor, model krmilnika: BodorThinker, vrsta laserja: vlakenski laser, proizvajalec laserskih virov: Boder, model laserskega vira: Bodorpower Genius, laserske ure: 5 h, laserska moč: 3.000 W, valovna dolžina laserja: 1.064 nm, Premer cevi (maks.): 220 mm, Dolžina cevi (maks.): 6.500 mm, delovna višina: 850 mm, potovalna razdalja osi X: 6.500 mm, pomik osi Y: 220 mm, pomik po osi Z: 120 mm, hitrost pomika os X: 90 m/min, hitrost podajanja osi Y: 60 m/min, hitrost podajanja os Z: 30 m/min, hitrost rezanja: 60.000 mm/min, hitrost pozicioniranja: 100 m/min, natančnost pozicioniranja: 0,05 mm, natančnost ponavljanja: 0,03 mm, teža obdelovanca (maks.): 200 kg, moč: 22,5 kW (30,59 KM), vhodna napetost: 400 V, vhodni tok: 63 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, priključek za stisnjen zrak: 6 letvica, skupna masa: 4.500 kg, skupna dolžina: 9.000 mm, skupna širina: 2.000 mm, skupna višina: 2.200 mm, Oprema: CE označba, Bodor K1 laserski stroj za rezanje cevi – 3 kW vlakenski laser Bodor K1 je kompakten in ekonomičen laserski stroj za rezanje cevi, namenjen natančnemu rezanju okroglih, kvadratnih in posebnih profilov. Opremljen je s 3 kW vlakenskim laserjem, zato je idealen za majhne do srednje debeline materialov in omogoča visoko kakovost reza ob učinkoviti porabi energije. Itodpfoy A Hntex Al Nef Zahvaljujoč sodobnemu CNC krmiljenju in intuitivni programski opremi omogoča K1 enostavno upravljanje in hitre nastavitve. Stroj prepriča z visoko dinamiko, natančnim pozicioniranjem in zanesljivo obdelavo različnih kovinskih profilov. Idealen je za kovinsko industrijo, pogodbeno proizvodnjo ter za vstop v avtomatizirano obdelavo cevi.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2009, vrsta laserja: CO₂ laser, laserska moč: 3.200 W, X working area max.: 6500 mm Laser power: 3200 watts Control: SINUMERIK 840D Standard equipment: - Sturdy machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure setting - Laser cutting head with 5" lens, DIAS III - Quick-change system for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - SINUMERIK 840D control: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: multi-beam light barriers, fully enclosed and ventilated beam guidance, compact dust extractor, safety cabin - PRS 3001 discharge station with brush table - Set of chuck jaws D 20-85 mm Optional equipment: Itodpfeytpimex Al Nef + Upgraded to TruFlow 3200 laser in 2000 + SeamLine Tube + LoadMaster Tube 6.5 m (rear) + Focus Line

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, vrsta laserja: CO₂ laser, laserska moč: 2.700 W, X working area max.: 6500 mm Laser power: 2700 watts Control system: SINUMERIK 840D Standard equipment: TRUMPF loading unit: - Tube feed for round, square, and rectangular tubes via stock buffer section with X-stop for tube lengths min. 3 m and max. 6 m - Length measurement of raw material - Transfer unit to the machine - Tube storage with tube separation, alignment, and transfer to tube feed, max. bundle weight 4000 kg - Good parts removal up to max. 3,000 mm Itodpfx Aljytfyze Njf - Chip conveyor - Additional tube supports - Tube handling unit: rotation and feed station: rotary clamping unit with pneumatically operated clamping jaws, for tube length of 6000 mm and tube diameters from d = 20 - 150 mm, 2 clamping ranges: d = 20 - 85 mm and d = 85 - 150 mm - Carriage unit as linear guide - Feed station with motor drive, incl. connection for extraction - Tube support: Between tube support and through-feed chuck there are five automatically retractable support elements with profile shells - Through-feed chuck: with a passage of d = 150 mm - The clamping jaws position the tubes centrally to the rotational axis center in the Y- and Z-direction for the cutting process - 2 sets of clamping jaws for round, rectangular, and square tubes (simple version), clamping range 20 - 85 mm, 85 - 150 mm - Good part removal (unloading cabin for round and rectangular tubes) - Sorting options: 2 finished parts (front and rear), 1 flat - Scrap conveyor; programmable sorting; max. scrap length 300 mm (collection container, scrap belt) - Finished part length up to 3000 mm automatically unloaded (front and rear) Safety equipment: - Compact dust extractor: filter unit designed for separation of airborne particles generated during laser cutting of metal - Light barrier: safeguarding of loading area by light barriers - Protective cabin: A Makrolon-metal sheet combination is installed in the area of the cutting head for protection against laser radiation - Chip conveyor: Belt conveyor for removal of cutting waste - Operating manual

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 24 h, Manufacturer: DURMA Model: HD-TC 60170 Fiber Year of manufacture: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 24 h Max. tube diameter: 170 mm Min. tube diameter: 20 mm (12 mm optional) Max. dimensions for square profiles: 120x120 mm Max. dimensions for rectangular profiles: 150x100 mm Max. profile length: 6500 mm Min. profile length (for automatic feeding): 3000 mm Itsdpsdx Nfwofx Al Nsf Max. profile weight: 37.5 kg/m Max. material thickness (for 2 kW): 8 mm Min. material thickness: 0.8 mm Length of last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeatability: +/- 0.05 mm Max. loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical, H, C, U, L *Footprint (L/W/H): approx. 16,000 x 7,400 x 2,350 mm *Weight: approx. 20,000 kg *Depending on equipment variant Standard equipment Siemens Sinumerik 840D control Auto-focusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for position point determination Central lubrication Chip conveyor External user interface for analog output (power-speed-pressure) External CAD/CAM programming software Lantec with auto-nesting Work area lighting Warning signal lamp Selectable laser cutting options Remote Control: remote maintenance access via LAN or WLAN CE marking Extended equipment IPG fiber laser source 2000 Watt (incl. chiller) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our premises in Staufenberg. We will gladly provide you with further information upon request.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Manufacturer: DURMA Model: HD-TC 60170 Fiber Year of manufacture: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 24 h Max. tube diameter: 170 mm Min. tube diameter: 20 mm (12 mm optional) Max. dimensions for square profiles: 120x120 mm Max. dimensions for rectangular profiles: 150x100 mm Max. profile length: 6500 mm Min. profile length (for automatic feeding): 3000 mm Ijdod Tt Atepfx Al Netf Max. profile weight: 37.5 kg/m Max. material thickness (for 2 kW): 8 mm Min. material thickness: 0.8 mm Length of last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeatability: +/- 0.05 mm Max. loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical, H, C, U, L *Footprint (L/W/H): approx. 16,000 x 7,400 x 2,350 mm *Weight: approx. 20,000 kg *Depending on equipment variant Standard equipment Siemens Sinumerik 840D control Auto-focusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for position point determination Central lubrication Chip conveyor External user interface for analog output (power-speed-pressure) External CAD/CAM programming software Lantec with auto-nesting Work area lighting Warning signal lamp Selectable laser cutting options Remote Control: remote maintenance access via LAN or WLAN CE marking Extended equipment IPG fiber laser source 2000 Watt (incl. chiller) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our premises in Staufenberg. We will gladly provide you with further information upon request.

Stanje: novo, Leto izdelave: 2024, The Durma Tube Laser HD-TC 60220 stands for maximum precision and efficiency in tube material processing. With its impressive maximum tube diameter of Ø220 mm and the ability to cut both square profiles up to 160 x 160 mm and rectangular profiles up to 200 x 100 mm, this tube laser offers exceptional flexibility for a wide range of applications. Thanks to the advanced automatic loading system, which can handle tubes up to Ø170 mm in diameter, and the capability to process materials up to 6500 mm in length, the HD-TC 60220 is ideal for projects requiring rapid production while maintaining consistently high quality. The minimum material length for automatic loading is 3000 mm, further enhancing the machine's efficiency and reducing processing time. Max. tube diameter: Ø220 mm Laser power: 3 kW Ijdpfx Ajq Tpkyol Notf Max. dimensions of square profile: 160 x 160 mm Max. dimensions of rectangular profile: 200 x 100 mm Min. tube diameter: 20 mm (12 mm with manual loading) Max. tube diameter for automatic loading: Ø170 mm Max. profile dimensions for automatic loading: 150 x 100 mm, 120 x 120 mm Max. material length: 6500 mm Min. material length for automatic loading: 3000 mm Last piece length: 4000 / 6000 mm Discharge length: 150 mm Max. material weight per meter: 52 kg/m Max. material weight (total length): 340 kg Max. loading weight: 3000 kg Profile types: round, square, rectangular, elliptical Open profile types: L, U

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Na voljo je CNC 10-osni stroj za rezanje cevi HGG z vključeno plazemsko enoto Kjellberg HiFocus 280i. Območje premera cevi: 30 mm–330 mm, največja obremenitev cevi: 20 kN, največja dolžina cevi: 13.000 mm, največja teža obdelovanca: 2.000 kg, največji kot reza: 70°, največji plazemski rezalni tok: 280 A. Dokumentacija je na voljo. Ogled na lokaciji je možen. Itsdsytgpdepfx Al Nef

Stanje: rabljeno, Fiber laser, fiber laser cutting system with flatbed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer: DURMA Model: HD-F III 3015 III BH-IPG 2kW Serial number: 822817712 Year of manufacture: 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area: 3000 x 1500 mm Tube cutting device up to Ø 400 mm Laser power: 2,000 watts (fiber laser) Output power: 0.2 to 2 kW Wavelength: 1070–1080 nm IPG power demand: 6.4 kW/hour - Polarization: random - Collimation focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter single mode 50, 100, 200, 300 μm - Maximum power consumption: 42 kW - Machine power consumption: 20 kW - Filter power consumption: 4 kW - Chiller power consumption: 10+1 kW - Resonator power consumption: 7 kW Mild steel sheet thickness max.: 12 mm - Stainless steel sheet thickness max.: 6 mm - Aluminum sheet thickness max.: 6 mm - Copper sheet thickness max.: 3 mm - Brass sheet thickness max.: 6 mm Iodjkdnv Tspfx Al Notf X-axis working area: 3060 mm Y-axis working area: 1530 mm Z-axis working area: 160 mm Maximum sheet size: 3048 x 1524 mm Maximum sheet weight: 200 kg/m² - IPG fiber laser resonator next to machine - Water recooling unit for laser source and cutting head installed - Under-table extraction and extraction/filter unit installed - With double exchange table - Tube laser with 4-jaw chuck and large spindle bore next to flatbed - Steady rests for tube laser on linear guides - With CAD software - With nesting software - With tube laser software Very good condition

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Dodatna oprema Spremač snopova: 6,5 metara Iedpfx Alex H A Rxs Nstf Utovarivač s platformom: 6,5 metara Izlaz s transportnom trakom: 6,5 metara sprijeda, 4,5 metara straga Ovaj BLM Adige LT8 4kW CO2 proizveden je 2014. godine. Opremljen je laserom Rofin DC035 snage 3,5 kW i konfigurisan za lasersko rezanje cijevi sa 3D glavom za rezanje. Obradjuje materijale debljine do 12 mm i prečnika do 206 mm, sa maksimalnom dužinom od 6500 mm. Iskoristite priliku da kupite ovu mašinu za lasersko rezanje cijevi BLM Adige LT8 4kW CO2. Kontaktirajte nas za više informacija o ovoj mašini. Tipovi primjene Rezanje

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, laserska moč: 3.000 W, moč: 3.000 kW (4.078,86 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vrsta hlajenja: voda, skupna dolžina: 6.000 mm, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, NS-6022HG Tube-Laserschneidmaschine 3kW 3-Backen-Profirohrlaserschneidmaschine mit automatischem Ladesystem mit 6 m automatischer Entladung Iodpowu Rm Refx Al Njtf mit chinesischem 3D-Fasenkopf-BLT tauglich für Rohre T CE-Antistrahlungsglas Schutzabdeckungen AVR Düsen- und Linsenset etc. (jeweils SPCS) Serie: NS-HG Typ: Drei-Backen Nutenfunktion: Standard Leistung: 3 kW Maximale Rohrlänge: 7000 mm Rundrohr: Ø15 mm–Ø220 mm Quadratrohr: 15 mm x 15 mm–150 mm x 150 mm Rechteckrohr: 30 x 20 mm–160 x 80 mm Oval-/Flachovalrohr: Kurze Achse ≥ 15 mm, lange Achse ≤ 210 mm U-Profil: max. 20# I-Träger: max. 18# H-Profil: max. 175 x 90 mm Maximale Beschleunigung: 1,0 G Maximale Spannfutterschwindigkeit: 100 U/min Maschinengewicht: 10 t Stromversorgung: 380 V AC, 50 Hz Standard: Unterstützt Servo (Nut), Staubschutz (Y-Achse), Staubschutz (X-Achse), Staubschutz (Z-Achse), Sicherheitszaun (Lichtvorhang), Null-Reststück, Staubabsaugung im Schneidbereich, Staubabsaugung an der hinteren Spannvorrichtung

Leto izdelave: 2000, stanje: dober (rabljeno), Oprema tipa tigel, namenjena za izrezovanje, biganje in perforiranje kartona ter valovite lepenke. Največja velikost pole: 720 × 520 mm. Zmogljivost: do 25–28 ciklov na minuto. Moč motorja: 2,2 kW. Teža: približno 2000 kg. Brez dokumentacije. Isdpfx Aoyb Tc Hjl Notf

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, obratovalne ure: 2.000 h, vrsta upravljanja: CNC krmiljenje, vrsta laserja: vlakenski laser, proizvajalec laserskih virov: MAX Photonics, laserske ure: 2.000 h, laserska moč: 2.000 W, najv. debelina jeklene pločevine: 10 mm, maks. debelina pločevine iz nerjavečega jekla: 6 mm, maks. debelina aluminijaste pločevine: 6 mm, maks. debelina medeninaste pločevine: 6 mm, najv. debelina bakrene pločevine: 6 mm, Premer cevi (maks.): 230 mm, Dolžina cevi (maks.): 6.050 mm, delovna dolžina: 6.500 mm, vhodna napetost: 380 V, vhodni tok: 63 A, vrsta hlajenja: voda, skupna dolžina: 11.600 mm, skupna širina: 3.000 mm, skupna višina: 2.600 mm, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, nujno zaustavitev, odsesavanje prahu, varnostna svetlobna zapora, Na prodaj je rabljen cevni laser Bodor T230. Dolžina cevi 6000 mm, premer 230 mm, odlagališče 2000 mm. Stroj je v dobrem stanju, možen je ogled. Napravo je redno servisiralo in vzdrževalo naše usposobljeno osebje. Na voljo je navodilo za uporabo, CE certifikat, odsesavanje itd. Ogled v Mönchengladbachu. Itedpeypawysfx Al Njf

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 3 kW (4,08 KM), Leto izdelave: 2025, Oprema: hladilna enota, klimatska naprava, G16 Typ: z dvema vpenjalnima glavama Itedpfx Alowz Ufws Nef

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, vrsta laserja: vlakenski laser, Premer cevi (maks.): 9.000 mm, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vrsta hlajenja: voda, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Maximale Rohrlänge: Iodpfxowwqvws Al Nstf

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta laserja: vlakenski laser, laserska moč: 6.000 W, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Maksimalna dolžina cevi: Iedpfsw I In Rox Al Njtf

Stanje: novo, Leto izdelave: 2025, Premer cevi (maks.): 12.000 mm, potovalna razdalja osi X: 12.000 mm, Oprema: hladilna enota, varnostna svetlobna zapora, Težka vlaknovna laserska rezalna stroj za cevi s tremi vpenjali NS-12052HG 12000 mm, vpenjalo 500 Servopogon za pomožno podajanje Visokokakovostno vpenjalo Iodpfev D Uhfex Al Nstf Prilagodljivo različnim dimenzijam cevi Servokrmiljenje, vrhunske zmogljivosti Zagotavlja napravi izjemno dinamično delovanje Pomožni podajalni sistem Zmanjša delovno obremenitev in poveča učinkovitost Več vrst obdelanih cevi Podprto je "leteče rezanje" Visokonatančen nadzor osi Z Rezanje pod kotom Visoka stopnja avtomatizacije Obdelovanci dolžine ≤2 m se izločajo prek servo loput

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, stopnja avtomatizacije: samodejen, laserska moč: 3.600 W, najv. debelina pločevine: 10 mm, Premer cevi (maks.): 254 mm, Dolžina cevi (maks.): 6.500 mm, teža obdelovanca (maks.): 4.500 kg, Ponujamo to rabljeno lasersko rezalno napravo TRUMPF TruLaser Tube 7000, letnik 2016. Rezonator 3,6 kW Itjdoylvd Ijpfx Al Nef 6,5 metra nalaganja + 6,5 metra razlaganja, dve tračni mizi za sortiranje kosov Avtomatski magazin za profile, 4,5 tone + ročno nalaganje Poševno rezanje pod kotom 45 stopinj Povečan premer profilov/cevi do 254 mm Največja debelina rezanja: 10 mm Notranji senzor za zvar Zunanji senzor (zazna brezšivne stene) Za vprašanja ali dodatne informacije nam pišite ali nas pokličite.