Kreuzmayr Keb 400 And Kwem 1000 nakup rabljenega (63.144)

Leto izdelave: 2025, stanje: novo, Hourly output up to 800 kg/h with fresh fruit Including automatic belt tensioning and belt regulation Itjds S Un Djpfx Ab Aeg Integrated high-pressure belt cleaning (without external high-pressure cleaner) Stepless belt speed control Washing elevator with plastic conveyor chain and mounted milling/crushing unit (Raetz mill) with 3.0 kW motor Complete system made of stainless steel

Leto izdelave: 2025, stanje: novo, Capacity up to 2000 kg/h Mill motor 3.0 kW Elevator motor 0.37 kW Infinitely variable speed control via frequency inverter Automatic start-stop control for the elevator via 3-rod probe in the mash box of the subsequent machine (press, mash pump, etc.) Stainless steel construction on 4 wheels (2 swivel, 2 fixed castors) Iedpfxo Hmtdo Ab Aotg Dimensions (LxWxH): 3100x675x2200 mm Mash discharge height: 1310 mm Weight: 230 kg Integrated foldable sorting table Central floor drain for wash water (ø75 mm)

Leto izdelave: 2025, stanje: novo, Rated capacity 3000 kg/h (depending on fruit type & operating conditions up to 6000 kg/h possible) Yield up to 75% Belt width/length: 1000 mm / approx. 7000 mm Working width/height: 900 mm / 0–50 mm, continuously adjustable Belt speed continuously adjustable: 1.0–5.2 m/min Electrical connection: drive motor 2.2 kW 400V Washing arm motor 0.25 kW 400V Water consumption: 3 l/operating minute Weight: approx. 2300 kg Dimensions LxWxH: 2750x1890x1690 mm Iodoygmwepfx Ab Astg without high-pressure cleaner and without compressor

Stanje: novo, Grinding wheel width max. 145 mm Grinding wheel diameter/bore 300 mm Flange taper Reishauer 0 Grinding wheel dimensions 300 x 145 x 160 mm Carrier flange (machine type Reishauer RZ 400/800/1000) + grinding wheel included T1SP 300x145x160 M 2.5 EW20° 3GG Cubitron by 3M Ceramic grinding wheels for gear flank grinding – 145 mm wide Dimensions according to machine type Reishauer Profiling according to module m, number of starts gg, pressure angle EW Advantages: - Near-zero risk of grinding burn Itjdpfx Asuayy Tjb Aeg - Up to 50% shorter grinding times - Dressing effort reduced by a factor of 2 - Double the grinding wheel lifetime - Consistently uniform grinding performance - Significantly higher grinding parameters compared to standard tools

Stanje: novo, Grinding wheel width max. 145 mm Grinding wheel diameter/bore 300 mm Flange taper Reishauer 0 Grinding wheel dimensions 300x145x160 mm Carrier flange (machine type Reishauer RZ 400/800/1000) + including grinding wheel T1SP 300x145x160 M 1.5 EW20° 3GG by 3M Ceramic grinding wheels for gear flank grinding – 145 mm wide Ijdjuayy Hspfx Ab Astg Dimensions according to Reishauer machine type Profiling according to specified module m, tooth system gg, pressure angle EW Advantages: - Grinding burn risk reduced to nearly zero - Up to 50% shorter grinding times - Dressing effort reduced by 2x - Double the grinding wheel tool life - Consistently uniform grinding performance - Significantly higher grinding parameters compared to standard tools

Stanje: novo, Grinding wheel width max. 145 mm Itsdpsuayyyjfx Ab Ajg Grinding wheel diameter/bore 300 mm Flange taper Reishauer 0 Grinding wheel dimensions 300x145x160 mm Carrier flange (machine type Reishauer RZ 400/800/1000) + grinding wheel included T1SP 300x145x160 M 2.25 EW20° 3GG by 3M Ceramic grinding wheels for gear flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specified module m, tooth flank quality gg, pressure angle EW Advantages: - Grinding burn risk virtually eliminated - Up to 50% shorter grinding times - Dressing effort reduced by half - Double the grinding wheel service life - Consistently uniform grinding performance - Significantly higher grinding parameters compared to standard tools

Stanje: novo, Grinding wheel width max. 145 mm Grinding wheel diameter/bore 300 mm Flange taper Reishauer 0 Grinding wheel dimensions 300x145x160 mm Carrier flange (machine type Reishauer RZ 400/800/1000) + including grinding wheel T1SP 300x145x160 M1 EW20° 2GG by 3M Ceramic grinding wheels for gear flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling in accordance with module m, thread type gg, pressure angle EW Advantages: - Grinding burn risk approaches zero - Up to 50% reduced grinding times - Dressing effort reduced by half Itsdjuayymopfx Ab Asg - Double the service life of grinding wheels - Consistently uniform grinding performance - Significantly higher grinding parameters compared to standard tools

Leto izdelave: 2018, stanje: delavnici obnovljeno (rabljeno), Conveyor belts Belt width: 650 mm, 800 mm, 1000 mm, 1200 mm, 1400 mm Length: over 70 m Optional service walkways Rollers Iodpou N Ndvjfx Ab Aotg Motor

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), Manufacturer: S+S Separation and Sorting Technology GmbH Ijdpfx Abjk Eakvs Aetg Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical specifications: - 230 V - 0.7 A - 50 Hertz - IP65

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Itjdpfx Abolatz Do Aog Model: Unicon-D 2000/400/450/100 Year of manufacture: 2015 Electrical data: - 230 V - 0.7 A - 50 Hertz - IP65 Dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Stanje: dober (rabljeno), Obračalnik skladov Toppy Twister 1000 AJ Silver h=2000 Popolnoma delujoč, pripravljen za uporabo. Popolno stanje. Leto izdelave: 2016. Izdelano v Italiji. Ta stroj ima povečano višino sklada do 200 cm. Oprema: prezračevanje, tresenje, bočni rob. Iodpfx Ajy Sd Szjb Ajtg Tehnične specifikacije: Format: 1200×800 mm Višina sklada: 2000 mm Nosilnost: 1200 kg Teža naprave: 1300 kg Poraba moči: 9 kW Krmilna plošča, hitra uporaba, hidravlični pogon. Tiho delovanje. Kompaktna zasnova, zavzame malo prostora. Vključuje rampo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, moč: 38 kW (51,67 KM), hod: 400 mm, širina mize: 1.320 mm, dolžina mize: 1.000 mm, skupna višina: 6.300 mm, razdalja med stojali: 1.000 mm, nastavitev hidravličnega cilindra: 200 mm, Тримерова преса с натиск 400 тона ERFURT, Германия, модел PKZ 400 Itsdpfx Aelnlpxsb Ajg

Leto izdelave: 2020, stanje: novo, 1000 l/h Itsdpfocx Smbsx Ab Ajg Stainless steel frame on 4 adjustable feet Minimum/maximum level sensor in the pressure tank Stainless steel pressure vessel The product is pushed into the tank via a multi-nozzle head; Product pump: Non-return valve at the product inlet Sight glass at the product inlet CO2 pressure regulating valve for installation on the CO2 bottle Sight glass in the pressure vessel Max. pressure: 6 bar incl. electronic control incl. pressure boosting pump

Leto izdelave: 2025, stanje: novo, consisting of: Itodpfx Ajcl Tq Uob Aeg - Trailer - Washing elevator KWEM 1000 - Belt press KEB 400 - 2 x 220 l tanks with immersion sieve - Pasteurizer PAS 500 oil - Bag-in-box filler KBF 2000 for mobile unit - Accessories such as pumps, air compressor, high pressure cleaner, ...

Leto izdelave: 2022, obratovalne ure: 150 h, stanje: novo, Output capacity up to 8,000 kg/h Ijdpfx Abs Hnafj Astg with Raetz mill 5.5 kW with inclined conveyor (plastic chain), variable speed control High-performance blower Cleaning water recirculation pump

Leto izdelave: 2022, stanje: novo, Kreuzmayr compact puree plant for pitting and processing various fruits. Iedpshx Ebyjfx Ab Aotg 2 pitting and pulping machines installed Mash tube heater and pasteurizer with a capacity of 1,000 kg/h Oil or gas burner for the boiler can be installed as required

Leto izdelave: 2024, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Kreuzmayr Citrus Press KCE 1000 Newly developed citrus press in industrial standard Hourly capacity: approx. 2,500 kg oranges (depending on fruit size) Juice yield: approx. 50%, i.e. approx. 1,250 L/h of juice Drive power: 9.0 kW Weight: 700 kg Total machine height: 2,600 mm Fruit feeding height: approx. 1,950 mm Peel discharge screw Integrated juice finisher for fine filtration of the juice after pressing The machine can be operated with dry oranges (without washing). The juice does not come into contact with the peel, resulting in a minimal content of peel oil in the juice. Itjdpfxsq Huxio Ab Aeg

Leto izdelave: 2025, stanje: novo, Mobile fruit juice production unit, installed in a stainless steel swap-body container with hydraulic support legs. Consisting of: large bin tipper, washing and milling unit, belt press KEB 1000, 2 pieces of 800-liter buffer tanks, juice pump, double slot filter, pasteurizer PA 2000 Oil, and automatic Bag-in-Box filler Tec 500. Performance: up to 3,000 kg/h or 2,000 liters of juice per hour. Fully automatic system for filling Bag-in-Box pouches from the roll as well as for single pouches (1.5 liters to 20 liters volume). Integrated heating oil tank with 600-liter capacity, refillable from outside. Hydraulic remote control with wireless radio control for supports and doors; foot pedal for raising and lowering the large bin tipping device. Automatic container leveling to within +/- 0.5% inclination. Itsdocltl Ejpfx Ab Ajg Corner tarpaulins for optimal weather protection, central water drainage with box gutter and raised floor edge. Integrated high-pressure cleaner and compressor. The Bag-in-Box filler is pulled out laterally from the container for operation and connected to the buffer tank. Platform height in operation approx. 250 mm. Dimensions (LxWxH): 7,500 x 2,550 x 3,000 mm. Completely made from stainless steel frame, aluminum roof and side walls. Non-slip aluminum floor. Transportable by any truck or trailer suitable for swap-body transport. Total weight of ready-to-operate container approx. 8,000 kg. We build this unit exactly to your requirements! We will be happy to advise you personally. Integration of other systems and machinery possible!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Arburg 470H 1000-400 e² / hybrid machine / production line with Arburg Multilift Select robot Year of manufacture: 09.2010 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Injection pressure: 2000 bar Metering volume: 201 cm³ Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Platen size: 637x637 mm Ejector: electric Ijdpjy Sl R Sefx Ab Aotg Clamping system: toggle lever Control: SELOGICA - touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valves x 4 Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened - bimetallic Main motor - servo motor driven by inverter - energy saving Injection unit powered by servo motor controlled by inverter Machine equipped with a cylinder/battery with compressed nitrogen (additional charge for fast operation) Central lubrication Integrated sorting chute Arburg Multilift Select robot, 6 kg transverse Year of manufacture: 09.2010 4-axis robot: 3 axes powered by servo motors (electric); axis C - pneumatic Axis travels: X-400, Y-600, Z-1800 Robot with adapter, conveyor belt, and protective enclosure Purchase of robot and conveyor belt at extra charge Dimensions: Weight: 5180 kg Length/Width/Height: 4.40x1.56x2.02 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: on request

Stanje: rabljeno, Leto izdelave: 2001, Lippert tračni transporter GF 1000-550-400 Ijdpfsy R Hb Nox Ab Astg RA2508 Tehnički podaci: Transportna dužina (NL): 1000 mm Širina okvira (NB): 550 mm Širina trake (GuB): 400 mm Visina konstrukcije (BH): 105 mm Nosači: dostupni opciono Brzina transportera (v m/s): Pogon: SEW motor-reduktor S37 DT71D4/MM03/BW1 Električni podaci: 50Hz V380-500, kW 0,075 / 0,37 / S1 Obrtni valjak (UR): Ø = 34 mm Pogonski bubanj (AT): Ø = 64 mm Traka: tip SNB 5 E Godina proizvodnje: 2001 Opcionalno dostupno: Stope za montažu Bočna vođenja Frekventni regulator za besprekorno podešavanje brzine Cene su neto, bez PDV-a, sa centralnog skladišta Dr. Sonntag GmbH & Co KG, 97076 Würzburg Za individualno, stručno savetovanje slobodno nas kontaktirajte. Pozovite nas ili nam pišite na email. Rado ćemo Vam pomoći u planiranju i realizaciji vaših projekata. Radujemo se Vašem javljanju. Srdačan pozdrav, Vaš tim Dr. Sonntag GmbH & Co. KG Vaš specijalista i partner za intralogistiku.

Stanje: novo, številka stroja/vozila: 13358, Premer rotorja: 400 mm Širina rotorja: 1000 mm Itsdpjy E Altjfx Ab Asg Rezila rotorja: 3 x 2 Rezila statorja: 2 Približno presečišče dovoda: Kompaktni inline rezkalniki serije GST 400 so zasnovani predvsem za uporabo pri postopkih pihanja, za reciklažo voluminoznih delov, kot so steklenice, kanistri in zaboji, ter tudi pri pihalih in brizgalnih odrezkih. Nizka višina dovoda omogoča ročno polnjenje ali avtomatsko podajanje preko transportnega traku. Nizka raven hrupa in majhna potrebna površina ju naredita idealno rešitev za inline reciklažne aplikacije.

Stanje: rabljeno, Ravna brusilnica ROSA LE10 Hod 1000x400 mm Razdalja med brusilnim kolutom in mizo: 600 mm Premer brusilnega koluta: 400 mm Magnetna plošča Isdpeyzyx Nofx Ab Aetg Stroj je pod napetostjo v našem skladišču v Gussagu (BS).

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 55.800 h, vpenjalna sila: 100 kN, delovna prostornina: 201 cm³, tlak vbrizgavanja: 2.000 letvica, skupna masa: 5.400 kg, premer polžastega transporterja: 40 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto Itsdpfxeylpyve Ab Aeg

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 55.400 h, vpenjalna sila: 100 kN, delovna prostornina: 201 cm³, tlak vbrizgavanja: 2.000 letvica, skupna masa: 5.400 kg, premer polžastega transporterja: 40 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Itodpfx Abjylpy Aj Aeg Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: novo, Bernardo Universal Lathe Master 400 x 1000 incl. 3-axis Digital Readout Special accessories: Multifix tool post head, 3 straight tool holders, 1 prism holder (EUR 672.00 net, not included in the price) Centre distance: 1000 mm Centre height: 200 mm Swing over bed: 400 mm Swing over gap: 560 mm Swing over cross slide: 240 mm Bed width: 210 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-5 Spindle speed range: (12) 45 - 2000 rpm Longitudinal feed range: (27) 0.06 - 2.78 mm/rev Cross feed range: (22) 0.01 - 0.72 mm/rev Metric threads: (36) 0.8 - 14 mm Inch threads: (30) 2 - 28 TPI Quill diameter: 45 mm Quill stroke: 100 mm Iedegd Iagjpfx Ab Astg Quill taper: MT 4 Motor power: 2.0 / 2.4 kW Machine dimensions (L x W x H): 1860 x 800 x 1600 mm Weight approx.: 810 kg Scope of delivery: • 3-axis Digital Readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, according to DIN 55029 • Fixed steady rest – max. passage diameter 90 mm • Travelling steady rest – max. passage diameter 70 mm • Coolant system • Initial fill with Shell Tellus 46 • Extendable chip tray • Clamping plate 320 mm • Four-way tool post • Safety device for four-way tool post • Slip clutch • Micrometer longitudinal stop • Thread dial indicator • LED machine lamp • Reducing sleeve • Change gears • 2 centre points • Foot pedal with brake function (CE compliant) • Motor with magnetic brake according to CE standard / Operating tools Special accessories: Multifix tool post head, 3 straight holders, 1 factory-mounted prism holder (Price: EUR 672.00 net, not included in the price)