Kraussmaffei 100-380 Cx nakup rabljenega (27.943)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 102.060 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.000 kN, premer vijaka: 35 mm, razmak između stupova: 420 mm, tlak vbrizgavanja: 2.429 letvica, minimalna višina orodja: 300 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 600 mm, skupna dolžina: 4.240 mm, skupna širina: 1.510 mm, skupna višina: 2.180 mm, skupna masa: 7.800 kg, ogrevalna zmogljivost: 10,97 kW (14,92 KM), moč črpalke: 18.500 W, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, Ponujamo ta rabljen KraussMaffei 100-380 CX stroj za brizganje, letnik izdelave 2006. Stroj za brizganje plastike: KM 100-380 CX Mednarodna oznaka velikosti: KM 380 CX/100 Leto izdelave: 2006 Serijska številka: 61009013 Teža stroja: 7800 kg Stanje: pripravljen za uporabo (rabljen) Obratovalne ure črpalke: 102060 Obratovalne ure avtomatsko delo: 87744 Opis: Premer polža: 35mm Zapiralna sila: 1000kN Volumen brizga: 154ccm Tlak vbrizgavanja max: 2429bar Masa brizga: 59 ccm Minimalna višina orodja: 300mm Max pot odpiranja: 600mm Max razdalja med ploščama: 900 mm Razdalja med vodili: 420mm Centrirni obroč brizgalna stran: Ø125 Centrirni obroč izmetalna stran: Ø125 Izmetalna sila naprej/nazaj: 22,6/9,9 kN Hod izmetača: 150mm Dimenzija stroja (DxŠxV): 4240x1510x2180 mm Teža stroja: 7800kg Ogrevalna zmogljivost: 10,97kW Moč črpalke: 18,5kW Vrsta vhodnega toka: 400V, 50Hz standardna industrijska trofazna električna napeljava Oprema: dokumentacija Godpfx Ajyf E Amonfebl Če imate dodatna vprašanja ali potrebujete več informacij, nam prosim pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 1.609 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61008195, vpenjalna sila: 800 kN, premer vijaka: 40 mm, razmak između stupova: 420 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 183 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 750 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The fully hydraulic CX series impresses with exceptionally compact, efficient, and flexible two-platen machines. The highly compact two-platen concept with a cantilevered clamping unit provides generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with the BluePower servo drive further establishes a powerful foundation to meet the highest demands and to provide the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G01 (Order 38648713) CONTROL SYSTEM - MC 6 with TFT color display and multitouch functionality CLAMPING UNIT - Clamping force: kN 800 - Max mold opening force: kN 55 - Tie bar clearance (h x v): mm 470 x 420 - Mounting plate size (h x v): mm 670 x 670 - Mold installation height min.-max.: mm - Maximum daylight opening: mm 750 - Max. mold opening stroke: mm 500 - Ejector drive: hydraulic - Ejector stroke: mm 150 - Ejector force forward/return: kN 23 / 10 - Ejector speed forward/return: mm/s 760 / 800 - Max. mold weight: kg 1000 INJECTION UNIT - Screw diameter / Type: mm 40 / Standard (other diameters available) - Effective L/D ratio: 20 - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke for PS: g 183 - Injection speed: mm/s 100 - Injection flow: cm³/s 126 - Screw drive/speed: rpm 295 - Plasticizing rate (standard): g/s 12.3 - Nozzle contact force: kN 50 ELECTRICAL PARAMETERS - Connected load: kW 15.0 - Installed heating capacity: kW 10.9 - Power supply: V/Hz 400 / 50, 3 phase with neutral WEIGHT AND DIMENSIONS Gbodpey Rlmwefx Anfol - Net weight with control cabinet: t 3.55 - Length x width x height: m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - 1 additional temperature control zone for nozzle heating - Air valve, single (BWAP) - Pneumatic control for hot runner closure, single - Hydraulic core pull, single (BWAP) - Euromap interface for handling: E18, E63 - Euromap interface (central computer): E67, E77 - Adaptive Process Control (APC) - Injection-compression mode - Graphics analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered upon request. We look forward to your inquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 25.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61024546, vpenjalna sila: 800 kN, premer vijaka: 40 mm, injekcijska masa: 180 g, število vbrizgov: 1, vrsta vhodnega toka: trifazni, - Krmilni sistem MC6 - APC Gjdpfx Ansya Egujfsbl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, vpenjalna sila: 1.100 kN, skupna višina: 470 mm, največja dolžina izdelka: 470 mm, Ta Krauss Maffei 110-380 CX je bila izdelana leta 2013. Ima zapiralno silo 1100 kN, silo odpiranja orodja 70,0 kN in hod odpiranja orodja do 600 mm. Stroj je opremljen z robotom in ima notranjo dimenzijo 470 x 470 mm. Razmislite o možnosti nakupa tega hidravličnega brizgalnega stroja Krauss Maffei 110-380 CX. Za več informacij nas kontaktirajte. • Sila odpiranja orodja: 70,0 kN • Vpenjalna plošča (D x Š): 745 x 770 mm • Notranje dimenzije (D x Š): 470 x 470 mm • Maks. hod odpiranja orodja: 600 mm • Min. vgradna višina orodja: 300 mm • Širina odpiranja: 900 mm Dodatna oprema • Robot (vključen) • Vodni temperirni aparat (ni priložen) Gbedsx D Ea Uspfx Anfsl • Transportni trak (ni priložen)

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61037337, vpenjalna sila: 800 kN, premer vijaka: 30 mm, delovna prostornina: 113 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 103 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 900 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g,

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, 160 ton Krauss-Maffei brizgalni stroj, letnik 2006, s transportnim trakom. Premer polža 35 mm, 2 izvlečna jedra, 6 vročih kanalnih con. Stroj bo od nas dostavljen prenovljen in ga je možno pri nas prikazati v obratovanju! Gedpfx Aoh Dh Dusnfsbl

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Clamping force: 1100 kN, screw diameter: 35 mm, shot weight: 140 g, injection volume: 154 cm³, injection pressure: 2429 bar, max. cylinder temperature: 375°C, weight: approx. 8,000 kg, control system: MC 5 3.0, operating hours: 25,271 h, pump hours: 29,098 h. Included is a linear robot KM LRX 150, travel path X/Y/Z: 900 mm/1200 mm/3000 mm, payload: 15 kg. Documentation available. Inspection on site possible. Gjdpfxjwz N Tvj Anfebl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Brizgalni stroj Krauss Maffei KM 80-380 CX Gbedpfx Asxw Upfsnfel Leto izdelave: 2010 Enota za zapiranje Zapiralna sila: 800 kN Dimenzije vpenjalnih plošč (V × Š): 670 × 670 mm Prostor med stebri (V × Š): 420 × 420 mm Višina orodja (min./maks.): 250 mm Maksimalna odprtina: 750 mm Vbrizgalna enota Premer polža: 40 mm Volumen vbrizga: 201 cm³ Masa vbrizga (PS): 183 g Tlak vbrizga: 1860 bar Elektro-hidravlična oprema Moč črpalnega motorja: 15 kW Moč grelcev: 10,9 kW Dimenzije in teža Dimenzije stroja (d × š × v): 4,09 × 1,48 × 2,02 m Teža (z električno omaro): 3,55 t

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, obratovalne ure: 65.850 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61013689, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, razmak između stupova: 630 mm, delovna prostornina: 432 cm³, tlak vbrizgavanja: 2.304 letvica, injekcijska masa: 393 g, Oprema: dokumentacija / priročnik, Here we, as a dealer in injection molding machines, are offering the following well-maintained used injection molding machine: Of course, we are also actively purchasing well-maintained injection molding machines from the year 2010 onwards. We have been a major dealer in used injection molding machines for over 25 years. Current Note – Tax Information and Advantage for Used Machinery: As of 01/07/2025, used machines can also be subject to a special depreciation allowance of 30% per year for tax purposes. In addition to the lower purchase price compared to new equipment, you may claim the same depreciation amounts as for new machines. Keyword: Growth Booster (§ 7 paragraph 2 EStG-E) Currently available in our tested warehouse in Hanover: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control System: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Gbodpfsxqhuujx Anfol Machine Number: 61013689 Processed materials: PE and PP thermoplastics Extras: - 2x core pulls (movable core, fixed core) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection performance - Fast SK shut-down CX Midrange - Ejection of cooled nozzle plug - Start handling during mold movement - Start-up mode - Cycle time analysis - External USB keyboard - Graphic analysis with maintenance notes - Electronic coding injection unit - Pneumatic valve on BWAP for blow-out - 12 temperature control zones - Volt-free BDE contact - Process monitoring - Cycle memory - Trend graphics – target/actual comparison - PV control - Active back pressure control - Single owner – German origin - Regular maintenance by manufacturer and previous owner Clamping Unit Clamping force: 2,500 kN / 250 t Tie bar distance: 630 x 630 mm Platen size: 995 x 1050 mm Opening stroke: 820 mm Mold height: min. 330 mm Max. daylight: 1,150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection Unit Screw diameter: 50 mm Injection volume: 432 cm³ Shot weight: 393 g/PS Injection pressure: 2,304 bar Electrical Equipment Pump: 45 kW Heaters: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation, manual, and software included Available immediately from our warehouse in Hannover, Germany, ex works or delivered free to your site (shipping costs apply). The machine is offered function-tested and is in our sole ownership. The requested machine is immediately available in our Hanover warehouse, is offered function-tested, and may be inspected under power. For additional information about our machines and company: - We sell only machines purchased from active production that are in our own stock in Hannover. - All offered machines are tested and inspected before dismantling. - We DO NOT sell insolvency assets and we are NOT brokers handling third-party equipment. - All machines offered come from successful companies where maintenance and care are self-evident. - All machines offered are available for inspection at our warehouse.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, vpenjalna sila: 1.300 kN, premer vijaka: 55 mm, delovna prostornina: 523 cm³, tlak vbrizgavanja: 1.904 letvica, injekcijska masa: 479 g, minimalna višina orodja: 300 mm, Zapiralna sila: 130t Leto izdelave: 2008 Teža vbrizga: 475,9g Vbrizgalna enota 1000 Premer polža: 55 mm Specifičen tlak vbrizga: 1904 bar Volumen vbrizga: 523 ccm Teža vbrizga: 475,9 g Zapiralna sila: 130 t Dimenzije orodnih plošč: 745 x 745 mm Razmak med stebri: 470 x 470 mm Sila izmetalca: 22,6 kN Višina orodja: 300 mm Odpiralna pot: 600 mm Maksimalna razdalja med ploščami: 900 mm Teža: 8000 kg Leto izdelave: 2008 Krmiljenje: MC5 Oprema: - Akumulator - Priključek euromap 67 - 2x pnevmatski ventil - Hidravlično jedro na gibljivi plošči Gbodjynzrpopfx Anfol

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Krauss Maffei KM 300-1000 CX Injection Moulding Machine Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk station Clamping system: Fully hydraulic Plasticising Unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, opening: 3 mm Clamping Unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Max. daylight: 1150 mm Ejector stroke: 200 mm Ejector force (forward/back): 58 / 28 kN Injection Unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Shot volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticising capacity (at standard rpm): 54.3 g/s Electro-hydraulic Equipment Pump motor power: 45 kW Heater power: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke according to Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Gjdpfxjw U Rcdo Anfsbl Dimensions and Weight Net weight (with control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 44.678 h, vpenjalna sila: 2.500 kN, This hydraulic injection moulding machine, Krauss Maffei 250 - 1000 CX, was manufactured in 2017. It features a clamping force of 2,500 kN and a maximum mould weight of 3,430 kg. The machine is equipped with an LRX 150 linear robot for enhanced automation. Consider the opportunity to purchase this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. Gjdpfx Aneyhbq Eofebl • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1,050 mm • Minimum mould installation height: 330 mm • Distance between platens: 1,150 mm • Max. total mould weight: 3,430 kg (fixed: 1,715 kg / moving: 2,286 kg) • Core-pull control: 4 units (2 x fixed platen / 2 x moving platen) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (Code 1000): • Screw diameter: 55 mm • Injection pressure: 1,904 bar • Shot volume: 523 ccm • Shot weight (PS): 476 g • Injection rate (PS): 404 g/s • Wear-resistant unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment • Automation: Linear robot LRX 150 with B/C-axis combination (includes KM LRX 150 linear robot) • Hot runner controller: 12 zones • Cooling: 4 x HB 100

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Vbrizgalni stroj Krauss Maffei KM 160–1000 CX 🔹 Osnovni podatki Proizvajalec: Krauss Maffei Model: KM 160–1000 CX Leto izdelave: 2012 Delovne ure: 57.654 Kategorija: Hidravlični vbrizgalni stroj 🔧 Enota za zapiranje Zapiralna sila: 1600 kN (160 ton) Dimenzije plošč: 820 × 845 mm Razmak med stebrički: 520 × 520 mm Minimalna višina orodja: 300 mm Maksimalni hod odpiranja: 950 mm 💉 Enota za vbrizgavanje Premer polža: 50 mm Vbrizgalni volumen: 432 cm³ Teža vbrizga: 393 g Vbrizgalni tlak: 2304 bar ⚡ Elektro-hidravlični sistem Gbsdeyv E E Djpfx Anfjl Moč črpalke: 37 kW Moč grelca: 18,7 kW 👉 Možnost namestitve sistema za varčevanje z energijo (ESS) – dejanska zmanjšava porabe energije do 30–60 % 📐 Dimenzije in teža Teža stroja: 9 ton Dimenzije (d × š × v): 5,54 × 2,06 × 2,18 m

Leto izdelave: 2008, stanje: dober (rabljeno), For sale is an injection moulding machine from Krauss Maffei, model KM 110-380. The machine is in good to very good condition, with all maintenance and inspections carried out. Technical data: Year of manufacture: 2008 Extended tie bars Pneumatic needle shut-off 2x hydraulic core pulls 31,000 operating hours Screw diameter: 35 mm Clamping force: 1,100 kN Mould opening force: 70 kN Euromap 63 interface for version >1-04-09 Nitrogen accumulator included Included components: Godpfx Ajibyatenfobl Wedge shoes with bolts and nuts Double-bit key CE declaration of conformity – complete control cabinet Certificate USB memory stick Ejector coupling (mechanical) supplied in control cabinet All prices plus VAT. Machinery purchase and sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 22 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61035145, vpenjalna sila: 1.200 kN, premer vijaka: 35 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 2.429 letvica, injekcijska masa: 140 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 120 mm, odmični hod: 950 mm, vgradna višina: 450 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 6.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base injection molding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection molding, enabling you to respond quickly and innovatively to market requirements. It combines high performance, easy operation, and short delivery times. It can be used in a wide range of applications, for example in the packaging industry, electrical and electronics industry, medical technology, and the automotive industry. Your benefits: – Optimized price-performance ratio for a wide range of applications – High energy efficiency thanks to the all-electric machine concept – Realization of demanding delivery times thanks to the base machine concept with a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM  MC P1 with 15" TFT color display with multitouch functions CLAMPING UNIT  Clamping force kN 1200 Gedpfx Asy Rmwdsnfsbl  Maximum mold opening force kN 180  Tie bar spacing (h x v) mm 520 x 470  Mounting platen (h x v) mm 690 x 640  Mold height min. - max. mm 180 - 450  Maximum opening stroke mm 850  Maximum mold opening travel mm 450  Ejector drive electric  Ejector stroke mm 120  Ejector force forward/backward kN 27 / 33  Ejector speed forward/backward mm/s 300 / 300  Maximum mold weight kg 850 INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 22.9  Injection pressure bar 2429  Shot volume cm³ 154  Shot weight at max. stroke for PS g 140  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive / speed 1/min 374  Plasticizing rate (standard screw)4) g/s 18.9  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 22.7  Installed heating power kW 11.5  Power supply V / Hz 200 / 50 3-phase with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 6.7  Length x width x height m 5.18 x 1.76 x 1.90 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing unit  BluePower full insulation for plasticizing cylinder  Open nozzle  Air valve 1-fold (BWAP)  Pneumatic control hot runner shut-off 1-fold  Electrical interface pneumatic cascade 4-fold  Euromap interface for handling E18 + E67  Euromap interface (central computer) E67, E77  Water manifold 4-fold  Electrical pre-equipment for hydraulic auxiliary unit  Automatic central lubrication  Adaptive Process Control (APC)  Injection-compression molding circuit  Graphic analysis package  Swivel device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Krauss Maffei KM 130-750 CX Leto izdelave: 2010 Vbrizgalna enota: Premer polža: 40 mm Teža vbrizga: 228 g Tlak vbrizga: 2500 bar Dozirni volumen: 251 ccm Zapiralna enota: Zapiralna sila: 130 t Razmak med vodili: 470x470 mm Velikost vpenjalnih plošč: 745x770 mm Izmetalec: hidravlični Zapiralna enota: hidravlična Krmiljenje: MC5 Dodatna oprema: Euromap 67 Vmesnik za robota Hidravlični izvlek jedra x 1 Zračni izvlek jedra x 6 Krmiljenje z vročimi kanalizacijami x 18 Vbrizgalna enota kaljena – bimetal Proporcionalni ventil na vbrizgalni enoti – natančen vbrizg Gedpfey Dqiksx Anfjbl Dimenzije: Teža: 9000 kg Dolžina/Širina/Višina: 4,90x1,60x2,10 m Vsi ponujeni stroji so pred prodajo zagnani s strani naših serviserjev. Možno je prejeti video tehničnega testa izbranega stroja ali sodelovati na tehničnih testih v živo v našem podjetju v Lodžu. Cena: na zahtevo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cc Clamping unit: Clamping force: 250 t Tie bar spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum monitoring x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable delivery hydraulic pumps Parallel movements Proportional valve on the injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes electrically driven with servomotors: X, Y, Z, B; C axis Touch control panel Gjdpfx Anoy Dqiwsfsbl Robot safety package Robot with adapter, conveyor belt and safety enclosure Purchase of robot and conveyor at extra cost Dimensions: Weight: 20,100 kg Length/width/height: 6.50 x 2.20 x 2.30 m All machines offered are put into operation by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Krauss Maffei KM 35-55 CX / Machine in Very Good Technical Condition Year of Manufacture: 2008 Injection Unit: - Screw Diameter: 18 mm - Shot Weight: 18 g - Injection Pressure: 2,500 bar - Dosing Volume: 20 ccm Clamping Unit: - Clamping Force: 35 t - Tie Bar Distance: 320 x 320 mm - Platen Size: 540 x 540 mm - Ejector: Hydraulic - Clamping Unit: Hydraulic Control System: MC V - Touchscreen Additional Equipment: - Machine in very good technical condition - Euromap 67 - Robot Interface - Air Valve x 2 - Controller with 6 Hot Runner Zones - Injection Unit Hardened – Bimetallic - Machine regularly serviced by authorized Krauss Maffei service in Germany - Option to change screw diameter to 20 mm or 22 mm Dimensions: - Weight: 2,600 kg - Length/Width/Height: 3.50 x 1.40 x 1.70 m Gbsdpsy Dp Husfx Anfel Drive: - Pump/Motor: 11 kW - Heating Power: 3.78 kW - Total Power: 14.78 kW All machines offered are tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Plasticizing volume: 679 ccm Gjdpfx Aey Dqiqonfjbl Clamping unit: Clamping force: 200 t Tie bar spacing: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 - Touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system with 10 hot runner zones Injection unit hardened – bimetallic screw Energy-efficient machine – features a system with 3 variable delivery hydraulic pumps Parallel movements Proportional valve on injection unit – precise dosing Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 robot Year of manufacture: 2019 4-axis robot: 3 axes driven by electric servomotors; C axis – pneumatic Touchscreen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Krauss Maffei KM 80-180 CX with Sepro Industrial Robot 55 sprue picker Year of manufacture: 2005 Injection unit: Screw diameter: 30 mm Shot weight: 77.4 g Injection pressure: 2025 bar Dosage volume: 85 ccm Clamping unit: Clamping force: 80 t Tie bar distance: 420x420 mm Platen size: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC V - touchscreen Additional equipment: Euromap 67 Robot interface Control system with air valve Hydraulic core pull x 1 Injection unit hardened – bimetallic Sprue picker Sepro Industrial Robot 55 Year of manufacture: 2018 It is possible to purchase a Moretto brand raw material feeding system at an additional cost The set includes: - Volumetric screw dosing device with container - Conveyor device with proportional valve Dimensions: Weight: 3900 kg Length/Width/Height: 3.80x1.50x2.10 m Drive: Pump/Motor: 15 kW Heating capacity: 8.12 kW Total installed power: 23.12 kW All offered machines are tested by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided, or you may participate in live technical tests at our facility in Łódź. Price: On request Gbedsy Dp Ifepfx Anfjl

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036679, vpenjalna sila: 1.600 kN, premer vijaka: 40 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 1,892 letvica, injekcijska masa: 358 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 100 mm, odmični hod: 950 mm, vgradna višina: 500 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 9.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection Moulding Machines Direct from the Manufacturer! Gsdpfx Ajyzz Irjnfjbl As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The entry-level injection moulding machine, precisionMolding, is the perfect solution for fully electric injection moulding, enabling you to respond quickly and innovatively to changing market demands. It combines high performance, easy operation, and short delivery times. The machine is suitable for a wide range of applications, such as the packaging industry, electronics and electrical industry, medical technology, and the automotive sector. Your benefits: – Optimized price-performance ratio for a broad range of applications – High energy efficiency thanks to a fully electric machine concept – Reliable and efficient delivery times due to a base machine concept with a wide spectrum of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, year 2013) CONTROL SYSTEM - MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: 1600 kN - Maximum mould opening force: 120 kN - Daylight (H x V): 570 x 520 mm - Mounting platen (H x V): 770 x 720 mm - Mould installation height min. – max.: 200 – 500 mm - Maximum opening width: 950 mm - Maximum mould opening stroke: 450 mm - Ejector drive: electric - Ejector stroke: 100 mm - Ejector force, forward/reverse: 33 / 33 kN - Ejector speed, forward/reverse: 300 / 300 mm/s - Maximum mould weight: 1200 kg INJECTION UNIT - Screw diameter / type: 50 mm / standard - Effective L/D ratio: 20.2 - Injection pressure: 1,892 bar - Stroke volume: 393 cm³ - Shot weight at max. stroke for PS: 358 g - Injection speed: 200 mm/s - Injection flow rate: 393 cm³/s - Screw drive / rotation speed: 267 rpm - Plasticizing throughput (standard screw): 36.5 g/s - Nozzle contact force: 42 kN ELECTRICAL PARAMETERS - Connected load: 31.2 kW - Installed heating capacity: 15.5 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral WEIGHT AND DIMENSIONS - Net weight (incl. control cabinet): 9.7 t - Length x width x height: 5.65 x 1.82 x 1.95 m ADDITIONAL FEATURES - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot runner shut-off, single - Electrical interface for pneumatic cascade, 4-fold - Euromap interface for handling: E18 + E67 - Euromap interface (central computer): E67, E77 - Water manifold, 4-fold - Electrical pre-installation for hydraulic auxiliary unit - Automatic central lubrication - Adaptive Process Control (APC) - Injection compression moulding circuit - Graphic analysis package - Swivel device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, delovna prostornina: 393 cm³, Clamping Force: 1600 kN Gsdpfx Ajy Nlb Sonfsbl Max. Tool Opening Force: 87 kN Moving Platen Drive Force (opening): 45 kN Moving Platen Drive Force (closing): 38 kN Clamping Plate (H x V): 820 x 845 mm Clear Tie Bar Spacing (H x V): 520 x 520 mm Mould Opening Stroke: 650 mm Min. Mould Installation Height: 300 mm Max. Opening Width: 950 mm Ejector Stroke: 150 mm Ejector Force (forward/back): 23 kN Injection Unit: Screw Diameter: 50 mm L/D Ratio: 20 Injection Pressure: 1892 bar Stroke Volume: 393 ccm Shot Weight (PS): 358 g Injection Flow Rate: 177 ccm/s Screw Speed: 265 rpm Plasticizing Rate: 36.2 g/s Nozzle Contact Force: 50 kN Electro-Hydraulic Equipment: Rated Pump Motor Power: 22 kW Installed Heating Capacity: 16 kW Cylinder Heating Zones: 5 Oil Capacity: 489 l Dimensions & Weights: Floor Space Approx.: 5.50 x 2.00 x 2.20 m Overall Weight: 8200 kg Max. Mould Weight: 1862 kg Accessories: - Oscillation elements - BluePower - Servo Pump Drive Additional Equipment: - 1 x Air Valve - 8 x Hot Runner Control Zones - 2 x Core Pull on Moving Platen - 2 x Core Pull on Fixed Platen - Robot Interface according to Euromap 67

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 61.300 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.200 kN, premer vijaka: 35 mm, razmak između stupova: 470 mm, pritisk: 2.429 letvica, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: We are also actively purchasing well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Operating hours: 61,300 h Control system: MC5 Closing Unit Technical Data Clamping force: 1,200 kN Tie bar spacing (H x V): 470 x 470 mm Platen size (H x V): 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. daylight: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric location moving platen D: 160 mm Centric location fixed platen D: 125 mm Permissible mould weight: 1,485 kg Injection Unit Technical Data Screw diameter: 35 mm Shot volume: 156 ccm Injection pressure: 2,429 bar Screw length: 23 L/D Screw speed: 289 rpm Plasticising rate: 27 g/s PS Free-flow injection rate: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions (LxWxH): 6m x 1.7m x 2.19m Total weight: 9,700 kg Equipment Display language German Display language English +++Extras+++ Automation: Handling device/Take-out robot included - Handling: LR 100-2300 Conveying system: Roller conveyor included CE mark: Present Complete maintenance and inspection history Full latest test report Incl. conveyor belt and protective cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrical Equipment Schuko socket 10A CEE socket 16A Voltage: 400 V Gbjdpfx Asy D Adtsnfjl Frequency: 50 Hz Motor current: 80 A Warranty Warranty until initial commissioning Loading/Shipping Free loaded onto the buyer's truck or free delivered within Germany against freight charge. Available ex our warehouse Hannover, Germany.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 35.808 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 204 cm³, tlak vbrizgavanja: 1.860 letvica, injekcijska masa: 186 g, Here, we as a dealer of injection moulding machines offer the following well-maintained, used injection moulding machine for sale. Of course, we also buy well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial no.: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control: MC 5 Fully functional Condition: very well maintained Machine from German first ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic shut-off nozzle - 1 pneumatic valve at BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject sorting chute - Nozzle protection door – ejector area safety door foldable - Euromap interface 18 on FWAP - Ejector plate electrically operated in BWAP - Hydraulic auxiliary unit for hydraulic core pulls - Injection-compression moulding circuit - 2x hydraulic core pull (on BWAP and FWAP) - Pressure relief for core pull on BWAP and FWAP - 8-circuit water manifold - 8x temperature control zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up circuit, quality assurance package, cycle time analysis, cycle memory, event log - BluePOWER package – energy consumption display Gbodpfeyrd U Uox Anfjl - Graphical analysis package, trend graphics - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Main language: German Injection unit Screw diameter: 40 mm Shot weight: 186 g/PS Injection pressure: 1860 bar Injection volume: 204 ccm Clamping unit Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Mounting plates: 655 x 670 mm Mould height: 250 mm Max. platen distance: 750 mm Ejector stroke / force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until initial commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery (ex works) against reimbursement of freight costs Available from our warehouse in Hannover, Germany

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 78.454 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 3.000 kN, premer vijaka: 60 mm, razmak između stupova: 630 mm, delovna prostornina: 678 cm³, tlak vbrizgavanja: 2.007 letvica, vgradna višina: 330 mm, skupna dolžina: 6.500 mm, skupna širina: 2.200 mm, skupna višina: 2.300 mm, Zapiralna sila: 3000 kN Mere stebra h x v: 630 x 630 mm Velikost plošče h x v: 995 x 1050 mm Minimalna vgradna višina: 330 mm Največja razdalja med ploščama: 1150 mm Hod odpiranja: 820 mm Premer polža: 60 mm Volumen hoda: 678 ccm Tlak brizganja: 2007 bar Oprema Stroj brez rokovanja Gbedpfoyxmz Esx Anfel Prikaz na zaslonu v nemščini CEE vtičnica 16A Tlačni akumulator za povečano zmogljivost vbrizgavanja Hidravlični izvlek jedra 2x Stroj brez materialnega lijaka Nivelirni elementi Vmesnik EUROMAP 67 za rokovanje Vmesnik za rokovanje Schuko vtičnica 10A Dimenzije stroja D x Š x V: 6,5 m x 2,2 m x 2,3 m Skupna teža: 15000 KG