Krauss Maffei Km 1600 - 17200 Mx (2013) nakup rabljenega (14.329)

Stanje: dober (rabljeno), Leto izdelave: 2013, vpenjalna sila: 16.000 kN, Oprema: dokumentacija / priročnik, Zapiralna sila: 1600 t Premer vijaka: 135 mm Razdalja med stebri V: 1420 mm Nodpfx Agjyh I Emoxsla Razdalja med stebri H: 1870 mm Prostornina vbrizga: 9662 cm3 Tip: Horizontalen Pogon: Hidravlični

Leto izdelave: 2022, stanje: pripravljen za uporabo (rabljen), An as-new injection moulding machine including robot is available. 1) Injection moulding machine Krauss Maffei, year of manufacture: 2022, clamping system: hydromechanical two-platen system. Plasticising capacity: 8100, screw diameter: 105mm, nozzle radius: 35mm, nozzle bore: 6mm, clamping force: 1,700t, controller: MC6. 2) Industrial robot KUKA IR 1200 R3100.2 F/K, max. payload: 120kg, reach: 3,100mm, repeatability: +/-0.05mm, controller: KR C5. Documentation available. On-site inspection possible. Nledpfx Agevpvlcoxea

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 9.500 kN, premer vijaka: 120 mm, hod izmetalca: 300 mm, odmični hod: 1.900 mm, TEHNIČNE PODROBNOSTI Zapiralna sila: 9.500 kN Odpiralna sila: 665 kN Razdalja med stebri: 1.400 x 1.150 mm Montažne plošče: 1.960 x 1.710 mm Odpiralni hod: 1.900 mm Minimalna višina orodja: 500 mm Maksimalna višina orodja: 1.200 mm Maksimalna odprtina: 2.400 mm Hod izmetalca: 300 mm Visoko zmogljiv polž HPS-UN, premer: 120 mm Polmer šobe: 30 mm Premer odprtine šobe: 12 mm Premer polža: 120 mm Teža brizga (HDPE): 5.420 g Volumen brizga: 7.634 cm³ Specifični vbrizgovalni tlak: 2.257 bar PODROBNOSTI O STROJU Dimenzije & Teža Dimenzije (D x Š x V): 12.770 x 3.420 x 2.750 mm Nlodpfxjxup Sij Agxoa Teža stroja: 61,5 t

Stanje: dober (rabljeno), Leto izdelave: 2014, Zapiralna sila: 1150 t Razdalja med stebri HxV: 1580x1280 mm Premer vijaka: 90 mm Teža brizga: 2084 g Prostornina brizga: 2290 cm3 Tip: Horizontalen Nedpfxjy Epp Aj Agxela Pogon: Hidravlični

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, KRAUSS MAFFEI Injection Moulding Machine KM 1100-12000 MX Basic Information Manufacturer: Krauss Maffei Model: KM 1100-12000 MX Year of manufacture: 2008 Control system: MC5 Control panel: colour monitor integrated with the control desk Interfaces: 3 USB ports Nljdsyugfzopfx Agxja The machine is equipped with a fully hydraulic clamping system and a complete plasticizing unit for thermoplastics processing, featuring abrasion protection. Clamping Unit Clamping force: 11,000 kN Mould opening force: 770 kN Platen dimensions (H × V): 2210 × 1910 mm Tie bar spacing (H × V): 1550 × 1250 mm Mould opening stroke: 2,000 mm Minimum mould height: 600 mm Maximum mould height: 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection Unit Screw diameter: 120 mm Maximum injection pressure: 1,758 bar Injection volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s Electrical and Hydraulic Equipment Pump motor rated power: 132 kW Installed heater power: 82 kW Number of barrel heating zones: 7 Number of dry cycles (EUROMAP): 802 cycles/h Hydraulic oil tank capacity: 2,440 l Machine Dimensions and Weight Net weight (with control cabinet): 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor with a frequency inverter, adjusting the motor speed to the actual demand during the production cycle. Key benefits: - Reduction of electric energy consumption by up to 30% - Servo-driven hydraulic pump technology - World-class, proven technology used in plastics processing industry - Reduction of energy loss during idle operation - Lower heating of the hydraulic system - Prolonged lifespan of motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system allows you to significantly reduce running costs while maintaining full production parameters.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Krauss Maffei KM 1300-12000 MX injection moulding machine Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 The machine is designed for processing thermoplastics and is equipped with a complete plasticizing unit featuring abrasion protection. Technical Specifications Clamping Unit Clamping force: 13,000 kN Mould opening force: 910 kN Platen dimensions: 2210 × 1910 mm Nlsdpfeyrrwksx Agxea Tie bar clearance: 1570 × 1270 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection Unit Screw diameter: 105 mm Injection pressure: 2296 bar Shot volume: 5195 cm³ Shot weight for PS: 4728 g Injection rate: 856 cm³/s Plasticizing Parameters Screw speed: 103 / 145 rpm Plasticizing rate (PS): - Standard speed: 122 g/s - Increased speed (option): 171 g/s Electro-hydraulic Equipment Nominal pump motor power: 132 kW Installed heater power: 71 kW Number of barrel heating zones: 7 Dry cycle time according to Euromap 6: 765 cycles/h Hydraulic oil tank capacity: 2440 l Dimensions and Weight Net weight with control cabinet: 70 tons Installation dimensions: 13.03 × 3.65 × 2.82 m

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, obratovalne ure: 35.000 h, Funkcionalnost: popolnoma funkcionalen, Krauss-Maffei KM 1150/4300 MX Horizontalna brizgalka znamke Krauss-Maffei s 1150 ton zapiralne sile. Letnik 2014. Delovnih ur: 35.640. Krmiljenje MC6. Oprema vključuje: ABB 6-osni robot, 24 con vročega kanala, sekvenčno 10 pnevmatskih + 10 hidravličnih. Možen ogled v proizvodnji. Tehnični podatki Njdpfxoy Efkre Agxsla ZAPIRALNA SILA: 11500 kN DELOVNE URE: 35.600 PREMER POLŽA: 90 mm TLAK VSTREKOVANJA: 1839 BAR VOLUMEN VSTREKA: 2290 cm3 TEŽA VSTREKA: 2084 g HOD ODPIRANJA: 2000 mm DIMENZIJE PLOŠČ: 2210x1910 mm NAJMANJŠA DEBELINA ORODJA: 600/1200 mm LETO IZDELAVE: 2014

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, vpenjalna sila: 13.000 kN, KM1300 - 8100 MX leto izdelave 2011 KM1300MX zapiralna sila t: 1300 Razdalja med vodili: 1570 x 1270 mm Višina orodja min./maks.: 700/1400 mm Dimenzije plošče: 2210 x 1910 mm Hod odpiranja: 2350 mm Maks. odprtina: 3050 mm Brizgalna enota tip 8100 MX Premer polža: 105 mm Maks. prostornina brizganja: 4546 cm3 Spec. tlak vbrizga: 1778 bar Velikost centrirnega obroča: 315 mm Hidravlična jedra: 4 + 4 Število ogrevalnih con: 32 za orodje Število hladilnih krogotokov: 8+8 Električne kaskade: 12 Hlajenje: 12 + 12 Hidravlični vročekanalni krog: 1x EUROMAP 63,67,73 Sistem kodiranja orodja Možen nakup s: Mu Cell-tehnologijo (leto izdelave 2014) Trexel SCF SII sistem + Mucell Interface Kit Tip: TE30 Povsem nov polž od Krauss Maffei 105 mm Teža 64000 kg Malo obratovalnih ur. Njdsy Emurspfx Agxela

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 29.000 h, vpenjalna sila: 50 kN, delovna prostornina: 59 cm³, tlak vbrizgavanja: 2.500 letvica, skupna masa: 3.700 kg, premer polžastega transporterja: 25 mm, Freight basis: ex location Delivery time: by arrangement Payment terms: 100% prior to machine takeover, net Manufacturer: Krauss Maffei Model: KM50-180AX Condition: from ongoing production Operating hours: approx. 26,000 CLAMPING UNIT: Clamping force: 50 t Opening stroke: 300 mm Min. mould installation height: 150 mm Max. mould installation height: 470 mm Tie bar distance (h x v): 410 x 360 mm Platen dimensions (h x v): 510 x 460 mm Centering (nozzle–ejector plate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Shot weight in polystyrene: 54 g Stroke volume: 59 cm³ Injection pressure: 2,500 bar CONTROL SYSTEM: MC5 Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: 2x (hydraulic core pull unit) Air valves: 2 Hot runner control zones: 6 Robot interface: Euromap 67 Additional equipment: quality monitoring package GENERAL DATA: Installed heating capacity: 8.1 kW Nlodpfx Ajppigdsgxea Pump drive power: not applicable Total connected load: motor + heating Total weight: 3,700 kg Overall dimensions L x W x H: 4.4 x 1.6 x 1.9 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 4.517 h, vpenjalna sila: 16.000 kN, premer vijaka: 125 mm, injekcijska masa: 7.450 g, This 3-axis hydraulic injection moulding machine Krauss Maffei 1600-17200MC was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine offers a maximum shot weight of 7,450 g and a platen size of 2,600 x 2,110 mm. If you are looking for a high-quality injection moulding machine, you should consider the Krauss Maffei 1600-17200MC, which we currently have for sale. Contact us for further details. • Injection unit: 17200 • Tie bar spacing (h × v): 1,600 × 1,250 mm • Platen size (h × v): 2,600 × 2,110 mm Nledpfxeyyyr To Agxea • Daylight (x × y): 1,800 × 1,400 mm • Max. mould opening stroke: 2,500 mm • Mould installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mould opening force: 1,108 kN • Moving platen force: opening 177 kN / closing 153 kN • Ejector stroke: 300 mm • Ejector force (forward/back): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 73,761 h Additional equipment: • Spare cylinder/screw set (1x) • Internal cooling system • Core pull device (2x)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, vpenjalna sila: 8.000 kN, premer vijaka: 85 mm, injekcijska masa: 2.452 g, Ta Krauss Maffei KM 800-6100MX je bila izdelana leta 2007. Ima zapiralno silo 8000 kN in vbrizgalni volumen 2695 cm³, zaradi česar je primerna za različne materiale kot so PA, PP, PE in ABS. Stroj je opremljen z robotskim sistemom Wittmann, ki izboljšuje možnosti rokovanja. Če iščete kakovosten brizgalni stroj, razmislite o hidravličnem brizgalnem stroju KM 800-6100MX podjetja Krauss Maffei, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. • Vbrizgalna enota: 6100 • Vbrizgalni volumen: 2695 cm³ • Vbrizgalni tlak: 2242 bar • Predelovani materiali: PA, PP, PE, ABS ipd. • Temperatura cilindra: do 450°C • Razpoložljivost: začetek leta 2027 Dodatna oprema • Ravnanje: Wittmann robotski sistem Nlsdpfx Aoyyxc Djgxoa • Model: W743 • Moč: 400 V, 18 A / 12,5 kVA • Hodi osi: X 1200 mm, Y 2000 mm, Z 4000 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 30.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force: 8,000 kN Maximum mold opening force: 560 kN Moving platen drive force (open): 89 kN Moving platen drive force (close): 92 kN Clamping plate dimensions (H x V): 1,600 x 1,550 mm Clearance between tie bars (H x V): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Maximum daylight: 2,100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200/100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 ccm Shot weight (PS): 3,064 g Injection flow rate: 690 ccm/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor power: 90 kW Installed heating capacity: 53 kW Nodjymn Rvspfx Agxsla Cylinder heating control zones: 7 Oil fill capacity: 1,500 l Dimensions and weights: Required space (approx.): 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Max. mold weight: 12,200 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - Tie bar puller - 3 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen - 20 x hot runner control zones - Robot interface as per Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 50.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force: 8,000 kN Maximum mold opening force: 560 kN Moving platen drive force (open): 89 kN Moving platen drive force (close): 92 kN Clamping plate dimensions (H x V): 1,600 x 1,550 mm Clearance between tie bars (H x V): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Maximum daylight: 2,100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200/100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 ccm Nodpfx Ajymn Nfegxjla Shot weight (PS): 3,064 g Injection flow rate: 690 ccm/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil fill capacity: 1,500 l Dimensions and weights: Required space (approx.): 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Max. mold weight: 12,200 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - Tie bar puller - 3 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen - 20 x hot runner control zones - Robot interface as per Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 50.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, tlak vbrizgavanja: 1.795 letvica, odmični hod: 2.100 mm, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 8,000 kN Max. mold opening force: 560 kN Movable platen opening force: 89 kN Movable platen closing force: 92 kN Mounting platen (H x V): 1,600 x 1,550 mm Clear space (H x V): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Max. mold weight: 12,200 kg Opening width: 2,100 mm Ejector stroke: 300 mm Ejector force fwd/rev: 200/100 kN Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Stroke volume: 3,367 cm³ Shot weight (PS): 3,064 g Injection flow rate: 690 cm³/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN MACHINE DETAILS Dimensions & weight Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Rated output of pump motor: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil capacity: 1,500 l Njdpfx Agsyv Acmoxsla Operating hours: 50,000 h EQUIPMENT Swing-out elements 1 x air valve Tie-bar pulling device 3 x hydraulic core puller at movable platen (BWAP) 2 x hydraulic core puller at fixed platen (FWAP) 20 x hot runner control zones Robot interface according to Euromap 67

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, obratovalne ure: 60.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 85 mm, Horizontal injection moulding machine from Krauss-Maffei. 800 tons clamping force. Year of manufacture: 2006. Screw diameter: 85 mm. MC5 control system. Approximate operating hours: 60,000. The injection moulding machine is delivered RE-conditioned by our team of technical experts and in optimal working condition. We can offer commissioning service at the customer's facility, ensuring full functionality upon completion of installation. Technical Details SCREW DIAMETER: 85 mm Nlsdpfxew Avafe Agxea INJECTION PRESSURE: 2242 Bar SHOT VOLUME: 2695 cm³ INJECTION WEIGHT: 2452 g (PS) YEAR OF MANUFACTURE: 2006 OPERATING HOURS: 60,000 MIN./MAX. MOULD HEIGHT: 550 / 1100 mm MAX. DISTANCE BETWEEN PLATENS: 2100 mm OPENING STROKE: 1600 mm TIE BAR DISTANCE: 1120 x 1000 mm PLATEN DIMENSIONS: 1600 x 1530 mm CLAMPING FORCE: 8000 kN

Stanje: rabljeno, Leto izdelave: 2006, Brizgalni stroj Krauss Maffei KM 800-4300 MX, letnik 2006 Stroj je opremljen kot sledi: - 5 hidravličnih kaskadnih krmiljenj - Brizgalna enota s cilindrom 90 - Krmiljenje MT5 - Prijemalo Krauss Maffei Nedpfx Agjw Hwr Dsxola - 2 transportna trakova

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 81.000 h, Tehnični podatki Njdpoyifgkjfx Agxola Leto izdelave: 2007 Stran zapiranja Zapiralna sila: 1300 t Maks. hod odpiranja/vgradna višina: 2300 mm Največja razdalja med vpenjalnimi ploščami: 4000 mm Najmanjša/največja višina orodja: 1000 - 1700 mm Največja višina vpenjalne plošče: 1910 mm Najmanjša velikost orodja: 1000 - 1700 mm Svetla razdalja med stebri: 1500 mm Radij šobe: R40 mm Teža orodja: 29000 kg Izmetni hod: 350 mm Brizgalna stran Premer polža: 135 mm Volumen hoda: 8588 ccm Jedrni izvleki AWS/DS: 1/1 Iglasti pnevmatski zapiralnik: 1 Stroj se dostavi z robotom Kuka in je lahko ogledan v proizvodnji.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Krauss Maffei KM 1100–12000 MX Injection Moulding Machine Year of manufacture: 2008 Robot: Wittmann Fully hydraulic clamping system. MC5 control system with colour display, integrated control panel and built-in 3 USB ports. Plasticising unit: Complete plasticising unit for thermoplastics with abrasion-resistant design, 120 mm screw diameter, non-return valve and open nozzle. Technical data Clamping unit Clamping force: 11,000 kN Mould opening force: 770 kN Platen dimensions (H × V): 2,210 × 1,910 mm Nljdpfxex Tgbho Agxea Tie bar spacing (H × V): 1,550 × 1,250 mm Mould opening stroke: 2,000 mm Mould height (min–max): 600 – 1,200 mm Platen daylight: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1,758 bar Shot volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s Electrical and hydraulic equipment Pump motor rated power: 132 kW Installed heater capacity: 82 kW Number of cylinder heating zones: 7 Number of dry cycles (Euromap): 802 1/h Oil tank capacity: 2,440 l Dimensions and weight Net weight with control cabinet: 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 60.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 9.500 kN, premer vijaka: 105 mm, razmak između stupova: 1.400 mm, delovna prostornina: 4.546 cm³, tlak vbrizgavanja: 1.778 letvica, injekcijska masa: 4.137 g, Closing force 950 kN Nlsdpfx Agox Hz I Nexea Max. tool opening force 665 kN Moving platen opening force 112 kN Moving platen closing force 117 kN Clamping plate (h x v) 1960 x 1710 mm Clear span (h x v) 1400 x 1150 mm Mould opening stroke 1800 mm Mould installation height min./max. 600/1200 mm Opening width: 2400 mm Injection unit: Screw diameter 105 mm L/D ratio 23 Injection pressure 1778 bar Stroke volume 4546 ccm Shot weight (PS) 4137 g Injection flow rate 805 ccm/s Screw speed 126 rpm Plasticizing rate 147 g/s Nozzle contact force 166 kN Electrohydraulic equipment: Rated pump motor power 110 kW Installed heating capacity 59 kW Cylinder heating control zones 7 Oil capacity 1500 ltr. Dimensions and weights: Space requirement approx. 12.00 x 3.50 x 3.00 m Total weight 67000 kg Max. mould weight 20300 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine Year of manufacture: 2011 LRX 500 Robot Z-axis: 4000 mm X-axis: 1500 mm Nledpfx Agswqdyisxea Y-axis: 1250/1250 mm Hydraulic-mechanical, two-platen clamping system with 4 pressure pads and 4 locking units on the movable platen. PV - injection unit control adjustment. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticising unit: Complete plasticising unit for thermoplastics with a 135 mm screw diameter, non-return valve and open nozzle. Nozzle radius: 25 mm, nozzle orifice: 9 mm TECHNICAL DATA Clamping Unit - Clamping force: 8,500 kN - Mould opening force: 560 kN - Platen dimensions (H x V): 1600 x 1600 mm - Tie bar clearance (H x V): 1140 x 1140 mm - Mould opening stroke: 1600 mm - Mould height (min-max): 500 - 1100 mm - Daylight: 2100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection Unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Shot weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Rated pump motor power: 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation space (L x W x H): 11.72 x 2.92 x 2.71 m

Stanje: dober (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei robot Year of manufacture: 2011 Nlsdpfx Ajtrya Rjgxja Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - injection unit stroke control. MC 5 control system with colour monitor, integrated control panel, and USB data carrier. Plasticizing unit Complete plasticizing unit for thermoplastics with screw diameter 135 mm, with non-return valve and open nozzle. Nozzle radius 25 mm, nozzle orifice 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8500 kN - Opening force: 560 kN - Mounting platen dimensions (h x v): 1600 x 1600 mm - Tie bar clearance (h x v): 1140 x 1140 mm - Opening stroke: 1600 mm - Mould height (min-max): 500 - 1100 mm - Daylight: 2100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1389 bar - Shot volume: 8588 cm³ - Shot weight for PS: 6098 g - Injection rate: 1414 cm³/s Electro-hydraulic equipment - Rated motor power (pump): 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation space (L x W x H): 11.72 x 2.92 x 2.71 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Molding Machine KM 850-12000 MX With Krauss Maffei LRX 500 Robot Year of manufacture – 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV – injection unit adjustment. MC 5 control system with color monitor, integrated control panel, and USB data carrier. Plasticizing Unit Complete plasticizing unit for thermoplastics with 135 mm screw diameter, shut-off nozzle and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Clamping Unit - Clamping force: kN 8500 - Mold opening force: kN 560 - Platen dimensions (H x V): mm 1600 x 1600 Nedewkhmmepfx Agxjla - Tie bar spacing (H x V): mm 1140 x 1140 - Mold opening stroke: mm 1600 - Mold height (min-max): mm 500 - 1100 - Daylight: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200/100 Injection Unit - Screw diameter: mm 135 - Injection pressure: bar 1389 - Shot volume: cm³ 8588 - Shot weight for PS: g 6098 - Injection rate: cm³/s 1414 Electro-hydraulic Equipment - Pump motor rated power: kW 132 - Dry cycle time as per Euromap 6: 1/h 965 - Oil tank capacity: l 2440 Weight and Dimensions - Net weight with control cabinet: t 49 - Installation dimensions (L x W x H): m 11.72 x 2.92 x 2.71

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.500 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force 8500 kN Maximum mold opening force 560 kN Moving platen opening force 153 kN Moving platen closing force 117 kN Mounting platen (h x v) 1600 x 1600 mm Clearance between tie-bars (h x v) 1140 x 1140 mm Mold opening stroke 1600 mm Min./max. mold installation height 500 / 1100 mm Max. opening distance 2100 mm Ejector stroke 300 mm Ejector force forward/backward 200/100 kN Injection unit: Screw diameter 95 mm L/D ratio 23 Injection pressure 1795 bar Shot volume 3367 cm³ Shot weight (PS) 3064 g Injection flow rate 690 cm³/s Screw speed 116 rpm Plasticising rate 104 g/s Nozzle contact force 166 kN Electrohydraulic equipment: Pump motor rated power 90 kW Nlsdpfx Asyb Sx Hjgxoa Installed heating power 53 kW Number of temperature control zones (barrel heating) 7 Oil capacity 1500 L Dimensions and weights: Required space approx. 11.00 x 3.00 x 2.60 m Total weight 43000 kg Max. mold weight 12200 kg Accessories: - Vibration mounts Additional features: - 1 x air valve - 4 x hydraulic core pulls - 12 x hydraulic cascades - 2 x 12-fold water manifold - Robot interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, vpenjalna sila: 3.500 kN, premer vijaka: 70 mm, injekcijska masa: 998 g, This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials, including PA, PP, PE, and ABS. If you are looking for a high-quality injection moulding machine, you should consider the hydraulic injection moulding machine KM 350-3000 from Krauss Maffei, which we have available for sale. Please contact us for further details. • Shot volume: 1097 cm³ • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450 °C • Mould opening force: 220 kN • Moving platen force: opening 105 kN / closing 95 kN • Max. opening stroke: 920 mm Nodpeyyxmvofx Agxela • Min. mould height: 380 mm • Max. daylight: 1300 mm • Dimensions of mounting platens (H x V): 1060 x 1095 mm • Tie bar spacing (H x V): 710 x 710 mm • Ejector stroke: 250 mm • Ejector force (forward/reverse): 95 / 49 kN • Max. mould weight: 4950 kg Additional equipment • Handling system: Wittmann with the following robot travel paths (X/Y/Z): 420 / 1200 / 2000 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Krauss Maffei KM 350–2700 C2+ Injection Moulding Machine 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of manufacture: 2004 Type: Hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, floppy disk drive) 🔧 Clamping Unit Clamping force: 3,500 kN (350 tonnes) Opening force: 220 kN Platen traverse force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1,060 × 1,095 mm Tie-bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1,300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Nlodpfxeyv E Nvs Agxea Injection pressure: 1,829 bar Injection volume: 1,433 cm³ Shot weight (PS): 1,304 g Screw speed: 218 / 284 rpm Injection rate: - 1,508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticizing System: Thermoplastics version with abrasion-resistant protection Non-return valve + open nozzle ⚡ Electro–Hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1,550 cycles/h Oil tank: 720 l 👉 The machine is a very good candidate for ESS (energy savings of up to 30–60%) 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m