Krauss Maffei Km 150-700C2 (2003) nakup rabljenega (19.664)

Stanje: rabljeno, Leto izdelave: 2003, vpenjalna sila: 1.500 kN, Oprema: dokumentacija / priročnik, Brizgalni stroj KM 150-700/C2 Enota za zapiranje 1. Zapiralna sila: 1500 kN 2. Velikost plošče (š × v): 780 × 790 mm 3. Odpiranje kalupa: 600 mm 4. Razdalja med vodili (š × v): 500 × 500 mm 5. Minimalna vgradna višina orodja: 300 mm 6. Izmetni hod: 150 mm 7. Vroči kanal – število uporabljenih con: 12 8. Upravljanje pnevmatskih ventilnih zatičev: 1 kos Brizgalna enota 1. Premer polža: 45 mm 2. Vbrizgalni tlak: 2336 bar 3. Največja količina vbrizga: 305 cm³ 4. Največja masa vbrizga (PS): 278 g Godpfxsyfm Ahe Anfjbl 5. Jedra: 2× hidravlični krog (BAP) 6. Polž - razmerje L/D: 22

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Clamping force: 1,500 kN, screw diameter: 50 mm, tie bar spacing: 500 mm, platen dimensions X/Y: 780 mm / 790 mm, opening stroke: 600 mm, daylight: 900 mm, ejector stroke: 150 mm, shot volume: 305 cm³, shot weight: 278 g, injection pressure: 2,336 bar. Machine dimensions X/Y/Z: approx. 4,700 mm / 1,550 mm / 2,200 mm, weight: approx. 7,000 kg, control system: MC4. Including Sepro handling robot. Documentation available. On-site inspection possible. Gbedpfjw Hthzox Anfol

Stanje: dober (rabljeno), Leto izdelave: 2014, Zapiralna sila: 1150 t Gbedpfx Anjy Epp Asfsl Razdalja med stebri HxV: 1580x1280 mm Premer vijaka: 90 mm Teža brizga: 2084 g Prostornina brizga: 2290 cm3 Tip: Horizontalen Pogon: Hidravlični

Stanje: dober (rabljeno), Leto izdelave: 2002, Brizgalni stroj Krauss Maffei KM 420-2700 C2 Osnovni podatki • Proizvajalec: Krauss Maffei • Model: KM 420-2700 C2 • Leto izdelave: 2002 • Serijska številka: 424227 Zapiralna enota • Zapiralna sila: 4200 kN (420 ton) • Dimenzije pritrdilnih plošč (VxŠ): 1270 x 1200 mm • Razmak med stebri (VxŠ): 800 x 800 mm • Min. višina orodja: 380 mm • Maks. višina orodja: 1020 mm • Največja odprtina: 1400 mm Brizgalna enota • Premer polža: 80 mm • Volumen brizga: 1433 cm³ • Masa brizga: 1304 g (PS) • Največji pritisk brizga: 1829 bar • Največja temperatura: 375°C Električna in hidravlična enota Gedpfxey I Tq Eo Anfebl • Napajanje: 400 V • Faze: 3~ • Frekvenca: 50 Hz • Skupni tokovni odjem: 237 A • Zaščita: 250 A • Moč črpalke: 75 kW • Moč grelcev: 36 kW Dimenzije in masa • Teža stroja: pribl. 22.000 kg • Dimenzije (d x š x v): 7,06 x 2,33 x 2,51 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Krauss Maffei KM 350–2700 C2+ Injection Moulding Machine 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Gbodeyv E Nvspfx Anfjl Year of manufacture: 2004 Type: Hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, floppy disk drive) 🔧 Clamping Unit Clamping force: 3,500 kN (350 tonnes) Opening force: 220 kN Platen traverse force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1,060 × 1,095 mm Tie-bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1,300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1,829 bar Injection volume: 1,433 cm³ Shot weight (PS): 1,304 g Screw speed: 218 / 284 rpm Injection rate: - 1,508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticizing System: Thermoplastics version with abrasion-resistant protection Non-return valve + open nozzle ⚡ Electro–Hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1,550 cycles/h Oil tank: 720 l 👉 The machine is a very good candidate for ESS (energy savings of up to 30–60%) 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, obratovalne ure: 35.000 h, Funkcionalnost: popolnoma funkcionalen, Krauss-Maffei KM 1150/4300 MX Horizontalna brizgalka znamke Krauss-Maffei s 1150 ton zapiralne sile. Letnik 2014. Delovnih ur: 35.640. Krmiljenje MC6. Oprema vključuje: ABB 6-osni robot, 24 con vročega kanala, sekvenčno 10 pnevmatskih + 10 hidravličnih. Možen ogled v proizvodnji. Tehnični podatki ZAPIRALNA SILA: 11500 kN DELOVNE URE: 35.600 PREMER POLŽA: 90 mm TLAK VSTREKOVANJA: 1839 BAR VOLUMEN VSTREKA: 2290 cm3 TEŽA VSTREKA: 2084 g HOD ODPIRANJA: 2000 mm DIMENZIJE PLOŠČ: 2210x1910 mm Gbjdsy Efkrepfx Anfol NAJMANJŠA DEBELINA ORODJA: 600/1200 mm LETO IZDELAVE: 2014

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.470 kN, premer vijaka: 50 mm, tlak vbrizgavanja: 2.000 letvica, odmični hod: 500 mm, skupna masa: 7.000 kg, Na voljo je brizgalni stroj Krauss Maffei KM 150-1000 C1, letnik 1997, opremljen z robotskim sistemom WITTMANN W711 za samodejno izmetavanje kosov. Gbsdjyn Ilvepfx Anfsl Glavni podatki: Zapiralna sila: 150 ton (≈1470 kN) Model: KM 150-1000 C1 Leto izdelave: 1997 Vključuje integriranega robota WITTMANN W711 Stroj je nastavljen za industrijsko proizvodnjo in opremljen s samodejnim manipulacijskim sistemom preko robota WITTMANN W711, idealno za procese s samodejnim izmetavanjem in zmanjševanjem časov cikla. Primeren za proizvodnjo tehničnih srednje velikih kosov iz PP, PE, ABS ali drugih običajnih termoplastov. Na voljo za ogled v Albaceteju (Španija). Dodatne tehnične informacije in video delovanja so na voljo na zahtevo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Injection Moulding Machine Krauss Maffei KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping unit: Clamping force [kN]: 13000 Platen dimensions (HxV) [mm]: 2210 x 1910 Tie bar spacing (HxV) [mm]: 1570 x 1270 Min./max. mould height [mm]: 700-1400 Max. opening stroke [mm]: 3050 Max. ejector stroke [mm]: 350 Injection unit: Screw diameter [mm]: 105 Injection volume [cm3]: 5195 Injection weight PS [g]: 4728 Injection pressure [bar]: 2296 Max. injection speed [g/s PS]: 186 Electrical/hydraulic equipment: Rated pump motor power [kW]: 132 Rated screw motor power [kW]: 145 Heaters power [kW]: 71 Dimensions and weight: Net weight with control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Cores: 3 hydraulic circuits (2 on moving platen, 1 on fixed platen) Pneumatics: 2 air blow valves + 1 valve for hot runner needle control Gbjdpoy Hqwysfx Anfel Hydraulic accumulator Cooling: 20 rotameter system (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – cylinder thermal insulation

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 66.160 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 3.000 kN, premer vijaka: 60 mm, delovna prostornina: 679 cm³, Clamping force: 3,000 kN Maximum tool opening force: 160 kN Moving platen opening force: 86 kN Moving platen closing force: 68 kN Clamping platen (H x V): 995 x 1,050 mm Clear space (H x V): 630 x 630 mm Mold opening stroke: 820 mm Minimum mold installation height: 330 mm Maximum opening width: 1,150 mm Ejector stroke: 200 mm Ejector force forward/backward: 58 kN Injection unit: Screw diameter: 60 mm L/D ratio: 21 Injection pressure: 2,000 bar Shot volume: 679 ccm Shot weight (PS): 618 g Injection flow: 325 ccm/s Screw speed: 259 rpm Plasticizing rate: 58 g/s Nozzle contact force: 110 kN Godpfsy Nk Uqjx Anfsbl Electro-hydraulic equipment: Rated pump motor power: 45 kW Installed heating capacity: 23 kW Number of heating zones (cylinder): 6 Oil filling: 720 liters Dimensions and weights: Installation space approx.: 6.20 x 2.20 x 2.40 m Total weight: 12,500 kg Maximum mold weight: 3,430 kg Accessories: - Vibration isolation elements - 10-circuit water manifold Additional equipment: - 1 x air valve - 3 x core pulls - 3 x hot runner control zones - Robot interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, vpenjalna sila: 3.500 kN, premer vijaka: 70 mm, injekcijska masa: 998 g, This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials, including PA, PP, PE, and ABS. If you are looking for a high-quality injection moulding machine, you should consider the hydraulic injection moulding machine KM 350-3000 from Krauss Maffei, which we have available for sale. Please contact us for further details. • Shot volume: 1097 cm³ • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450 °C • Mould opening force: 220 kN • Moving platen force: opening 105 kN / closing 95 kN • Max. opening stroke: 920 mm • Min. mould height: 380 mm • Max. daylight: 1300 mm • Dimensions of mounting platens (H x V): 1060 x 1095 mm • Tie bar spacing (H x V): 710 x 710 mm • Ejector stroke: 250 mm • Ejector force (forward/reverse): 95 / 49 kN Godpfeyyxmvox Anfjbl • Max. mould weight: 4950 kg Additional equipment • Handling system: Wittmann with the following robot travel paths (X/Y/Z): 420 / 1200 / 2000 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, vpenjalna sila: 8.000 kN, premer vijaka: 85 mm, injekcijska masa: 2.452 g, Ta Krauss Maffei KM 800-6100MX je bila izdelana leta 2007. Ima zapiralno silo 8000 kN in vbrizgalni volumen 2695 cm³, zaradi česar je primerna za različne materiale kot so PA, PP, PE in ABS. Stroj je opremljen z robotskim sistemom Wittmann, ki izboljšuje možnosti rokovanja. Če iščete kakovosten brizgalni stroj, razmislite o hidravličnem brizgalnem stroju KM 800-6100MX podjetja Krauss Maffei, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. • Vbrizgalna enota: 6100 Gbodoyyxc Dspfx Anfol • Vbrizgalni volumen: 2695 cm³ • Vbrizgalni tlak: 2242 bar • Predelovani materiali: PA, PP, PE, ABS ipd. • Temperatura cilindra: do 450°C • Razpoložljivost: začetek leta 2027 Dodatna oprema • Ravnanje: Wittmann robotski sistem • Model: W743 • Moč: 400 V, 18 A / 12,5 kVA • Hodi osi: X 1200 mm, Y 2000 mm, Z 4000 mm

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), premer vijaka: 40 mm, Ta Krauss Maffei 150-520 C2 je bila izdelana leta 2002. Ima premer polža 40 mm in je opremljena z robotom Sepro ter zalogovnim transportnim trakom iz leta 2014. Stroj je delujoč, z 50.327 urami obratovanja črpalke in 36.908 urami samodejnega obratovanja. Izkoristite priložnost za nakup te hidravlične brizgalke Krauss Maffei 150-520 C2. Za dodatne informacije o stroju nas kontaktirajte. Gbjdpsx D Hxlofx Anfel

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Vbrizgalni stroj Krauss Maffei KM 160–1000 CX 🔹 Osnovni podatki Proizvajalec: Krauss Maffei Model: KM 160–1000 CX Leto izdelave: 2012 Delovne ure: 57.654 Kategorija: Hidravlični vbrizgalni stroj 🔧 Enota za zapiranje Zapiralna sila: 1600 kN (160 ton) Dimenzije plošč: 820 × 845 mm Razmak med stebrički: 520 × 520 mm Minimalna višina orodja: 300 mm Maksimalni hod odpiranja: 950 mm 💉 Enota za vbrizgavanje Premer polža: 50 mm Vbrizgalni volumen: 432 cm³ Teža vbrizga: 393 g Gbodpfx Anjyv E E Dofjl Vbrizgalni tlak: 2304 bar ⚡ Elektro-hidravlični sistem Moč črpalke: 37 kW Moč grelca: 18,7 kW 👉 Možnost namestitve sistema za varčevanje z energijo (ESS) – dejanska zmanjšava porabe energije do 30–60 % 📐 Dimenzije in teža Teža stroja: 9 ton Dimenzije (d × š × v): 5,54 × 2,06 × 2,18 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Brizgalka: Krauss Maffei KM 800-5000 MC Leto izdelave: 2001 Število delovnih ur: 70.000 h Konfiguracija: Stroj z robotom, varnostno ograjo in transportnim trakom Razpoložljivost: Na voljo dve enaki napravi Sistem zapiranja: Sila zapiranja: 8.000 kN Največja sila odpiranja orodja: 356 kN Sila pomika gibljive odpirajoče plošče: 98 kN Sila pomika gibljive zapirajoče plošče: 92 kN Dimenzije plošče orodja (V x Š): 1.610 mm x 1.530 mm Gbodpfx Aoxqh I Ijnfsl Razdalja med vodili (V x Š): 1.120 mm x 1.000 mm Hod odpiranja orodja: 1.400 mm Minimalna višina orodja: 600 mm Največje odprtje orodja: 2.000 mm Hod hidravličnega izmetalca: 250 mm Brizgalna enota: Premer polža: 90 mm Razmerje L/D: 23 Tlak brizganja: 1.742 bar Prostornina brizganja: 2.863 cm³ Masa brizganja (PS): 2.605 g Dimenzije in teža: Dimenzije stroja (D x Š x V): 10,5 x 2,86 x 2,89 m Teža: 43 ton

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Information Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine number: 61030600 Year of manufacture: 2018 Control system: MC6 Control panel: colour monitor integrated with the operator console The machine is equipped with a fully hydraulic clamping system and the modern MC6 control system. Plasticizing Unit Complete plasticizing unit designed for thermoplastics processing. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: Yes Nozzle type: open Nozzle radius: 15 mm Nozzle opening: 6 mm Injection unit: SP 2000 Gjdpfx Ansyugkwsfebl Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Size of mounting plates (horizontal × vertical): 1270 × 1230 mm Tie bar clearance (horizontal × vertical): 800 × 800 mm Max mould opening stroke: 1020 mm Min mould height: 580 mm Max platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / backward): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection rate: 368 cm³/s Screw speed: 285 rpm Plasticizing capacity: 72.2 g/s Nozzle contact force: 82 kN Electrical & Hydraulic Equipment Nominal pump motor power: 75 kW Installed heater power: 29 kW Number of heating zones, cylinder: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Machine Dimensions & Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Max mould weight: 6700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor via a frequency converter, adjusting the motor speed to actual requirements during the production cycle. Key benefits: - Reduction of electric energy consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class quality and proven industrial technology - Reduced energy loss during idle operation - Lower heating of the hydraulic system - Increased lifetime of hydraulic components - Possibility to retrofit existing hydraulic injection moulding machines.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, KRAUSS MAFFEI Injection Moulding Machine KM 1100-12000 MX Basic Information Manufacturer: Krauss Maffei Model: KM 1100-12000 MX Year of manufacture: 2008 Gsdpeyugfzjfx Anfsbl Control system: MC5 Control panel: colour monitor integrated with the control desk Interfaces: 3 USB ports The machine is equipped with a fully hydraulic clamping system and a complete plasticizing unit for thermoplastics processing, featuring abrasion protection. Clamping Unit Clamping force: 11,000 kN Mould opening force: 770 kN Platen dimensions (H × V): 2210 × 1910 mm Tie bar spacing (H × V): 1550 × 1250 mm Mould opening stroke: 2,000 mm Minimum mould height: 600 mm Maximum mould height: 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection Unit Screw diameter: 120 mm Maximum injection pressure: 1,758 bar Injection volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s Electrical and Hydraulic Equipment Pump motor rated power: 132 kW Installed heater power: 82 kW Number of barrel heating zones: 7 Number of dry cycles (EUROMAP): 802 cycles/h Hydraulic oil tank capacity: 2,440 l Machine Dimensions and Weight Net weight (with control cabinet): 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor with a frequency inverter, adjusting the motor speed to the actual demand during the production cycle. Key benefits: - Reduction of electric energy consumption by up to 30% - Servo-driven hydraulic pump technology - World-class, proven technology used in plastics processing industry - Reduction of energy loss during idle operation - Lower heating of the hydraulic system - Prolonged lifespan of motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system allows you to significantly reduce running costs while maintaining full production parameters.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Krauss Maffei KM 1300-12000 MX injection moulding machine Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 The machine is designed for processing thermoplastics and is equipped with a complete plasticizing unit featuring abrasion protection. Technical Specifications Clamping Unit Gbsdpfxjyrrwkj Anfsl Clamping force: 13,000 kN Mould opening force: 910 kN Platen dimensions: 2210 × 1910 mm Tie bar clearance: 1570 × 1270 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection Unit Screw diameter: 105 mm Injection pressure: 2296 bar Shot volume: 5195 cm³ Shot weight for PS: 4728 g Injection rate: 856 cm³/s Plasticizing Parameters Screw speed: 103 / 145 rpm Plasticizing rate (PS): - Standard speed: 122 g/s - Increased speed (option): 171 g/s Electro-hydraulic Equipment Nominal pump motor power: 132 kW Installed heater power: 71 kW Number of barrel heating zones: 7 Dry cycle time according to Euromap 6: 765 cycles/h Hydraulic oil tank capacity: 2440 l Dimensions and Weight Net weight with control cabinet: 70 tons Installation dimensions: 13.03 × 3.65 × 2.82 m

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, KraussMaffei KM 320-2000 PA CN Injection Moulding Machine Year of manufacture: 2025 Machine equipped with a five-point, double toggle clamp mechanism (three-platen system) featuring a servo-electric drive for the clamping unit. Injection unit with servo-electric drive for injection, plasticizing, and aggregate movement. Control system: MC P1 – industrial computer, real-time Ethernet. Plasticizing unit Complete unit for thermoplastics Screw diameter: 70 mm Nozzle radius: 15 mm Nozzle opening: 6 mm Clamping unit Gsdpfx Aneyft Nzsfsbl Clamping force: 3,200 kN Mold opening force: 480 kN Platen dimensions (H × V): 1,084 × 1,034 mm Tie bar clearance (H × V): 820 × 770 mm Mold opening stroke: 650 mm Mold height (min.–max.): 300–700 mm Opening width: 1,350 mm Ejector stroke: 240 mm Ejector force: 63 kN Ejector speed: 300 mm/s Injection unit Screw diameter: 70 mm L/D ratio: 20.0 Injection pressure: 1,877 bar Shot volume: 1,078 cm³ Shot weight: 981 g Injection speed: 160 mm/s Injection throughput: 616 cm³/s Screw speed: 191 rpm Plasticizing rate: 65.9 g/s Nozzle contact force: 57 kN Electrical parameters Connected load: 55.7 kW Installed heater power: 29.2 kW Number of cylinder heating zones: 6 Dry cycle time (EUROMAP 6): 2.39 s / 574 mm Weight and dimensions Net weight with control cabinet: 23.2 t Machine dimensions (L × W × H): 7.57 × 2.22 × 2.32 m Machine in a modern servo-electric configuration, offering high precision, energy efficiency, and process repeatability.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Moulding Machine KM 420-3000 CX Gbjdpfjydbbvox Anfel Year of manufacture: 2011 Control system: MC5 Clamping unit: Clamping force: 4200 kN Tie bar clearance (h x v): 900 x 800 mm Mounting platen dimensions (h x v): 1400 x 1250 mm Min. mould height: 780 mm Maximum daylight between platens: 1400 mm Ejector stroke: 250 mm Ejector force (forward/back): 95.4 / 48.6 kN Max. mould weight: 6700 kg Injection unit: Screw diameter: 80 mm Injection pressure: 1856 bar Injection volume: 1608 cm³ Shot weight (PS): 1464 g Injection rate: 478 cm³/s Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Additional equipment: 2 x hydraulic nozzle control (GK) 2 x hydraulic core pull control – moving platen 1 x hydraulic core pull control – fixed platen Masterbatch dosing unit control 14 GK zones Electrical and general data: Pump motor power: 75 kW Installed heating power: 36 kW Power supply: 400 V / 50 Hz Oil quantity: 1075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), INJECTION MOLDING MACHINE KRAUSS-MAFFEI 150-700 C1 Year: 1999 Screw diameter: 55 mm Gbjdpfeh S Dncex Anfsl In excellent condition, still in operation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 9.585 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 55 mm, razmak između stupova: 520 mm, delovna prostornina: 523 cm³, tlak vbrizgavanja: 1.904 letvica, skupna dolžina: 6.700 mm, skupna širina: 1.600 mm, skupna višina: 2.300 mm, skupna masa: 10.900 kg, Zapiralna sila: 1.600 kN - kolenčasta ročica Steberna razdalja: 520 x 470 mm Velikost plošče: 710 x 660 mm Vgradna višina: 200 - 500 mm Odpiranje: 950 mm Premer polža: 55 mm Prostornina hoda: 523 ccm Tlak brizganja: 1.904 bar Oprema Zaslon v nemškem jeziku CEE vtičnica 16A CEE vtičnica 32A Tlačni akumulator za povečano zmogljivost vbrizgavanja Po 3 prosto programabilni vhodni in izhodni kanali Jedrni izvlek pnevmatski, 2 x Stroj z vodnim baterijskim hladilnikom Stroj brez dozirnega lijaka Izravnalni elementi Vmesnik za barvalno napravo Gsdpfoy Aktmex Anfjbl Vmesnik za temperirno napravo USB vmesnik Schuko vtičnica 10A Obrabno odporna plastificirna enota Ogrevanje orodja 24x Dimenzije stroja D x Š x V: 6.700 x 1.600 x 2.300 mm Skupna teža: 10.900 kg

Leto izdelave: 2008, obratovalne ure: 3.200 h, stanje: pripravljen za uporabo (rabljen), premer vijaka: 60 mm, Tato 5osá vstřikovací lis Krauss Maffei KM 200 CX 1400 MC5 byla vyrobena v roce 2008. Disponuje uzavírací silou 200 tun, s možností rozšíření na 300 tun, a šnekem o průměru 60 mm. Stroj je vybaven hydraulickým vyhazovačem, bočním vzduchovým ventilem, rozhraním pro robota a čtyřzónovým systémem regulace teploty formy. Pokud hledáte kvalitní vstřikovací lis, zvažte Krauss Maffei KM 200 CX 1400 MC5, který nabízíme k prodeji. Pro více informací nás neváhejte kontaktovat. Dodatečné vybavení Gbodpfx Anjyaizvefel • Hydraulický vyhazovač • Boční vzduchový ventil • Rozhraní pro robota • Čtyřzónový systém regulace teploty formy Výhody stroje Technické výhody stroje • Rozteč vodicích sloupů: 560 x 560 mm Další informace Stroj je stále pod proudem

Stanje: dober (rabljeno), Leto izdelave: 2013, vpenjalna sila: 16.000 kN, Oprema: dokumentacija / priročnik, Zapiralna sila: 1600 t Premer vijaka: 135 mm Razdalja med stebri V: 1420 mm Razdalja med stebri H: 1870 mm Prostornina vbrizga: 9662 cm3 Tip: Horizontalen Pogon: Hidravlični Gjdpfxoyh I Eme Anfsbl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Used injection moulding machine direct from the manufacturer! As the manufacturer KraussMaffei, we are offering one of our used injection moulding machines for sale. CONTROL SYSTEM - MC4 Godpfjnh Rwgsx Anfobl TECHNICAL DATA CLAMPING UNIT - Clamping force: 8000 kN - Distance between tie bars (h x v): 1120 x 1000 mm - Max. mold opening distance: 1400 mm - Min./max. mould installation height: 600/1100 mm - Movable platen stroke: 2000 mm - Ejector stroke: 250 mm - Ejector force: 226 kN (reverse: 59 kN) INJECTION UNIT - Screw diameter: 95 mm - L/D ratio: 23 - Injection pressure: 1795 bar - Injection volume: 3367 cm³ - Shot weight for PS: 3064 g - Injection rate: 690 cm³/s - Nozzle contact force: 166 kN Electrical Parameters - Pump connected load: 90 kW - Heating capacity: 61 kW Weight and Dimensions - Net weight: 45 t - Machine dimensions (L x W x H): 10.4 x 2.86 x 2.39 m As a rule, we deliver this system in fully functional basic condition. In addition, as the manufacturer of these systems, we can offer various additional options depending on individual requirements, such as: - Possible control system upgrades to extend the service life of the machine - Energy optimization upgrades - If required, integration with KraussMaffei digital products - Plasticizing unit retrofits - Optional: Organization and handling of delivery (not included in the price) - Optional: Installation and commissioning (not included in the price) With us, you benefit from first-class service and have the option to purchase ready-made spare parts packages with wear parts to ensure seamless production with your new pre-owned machine. Don’t hesitate – contact us today!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, Used injection moulding machine directly from the manufacturer! Gjdpfx Ajnh Rnuenfebl As a manufacturer, KraussMaffei is offering one of our pre-owned injection moulding machines for sale. CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 5000 kN - Tie bar spacing (h x v): 900 x 800 mm - Max. mould opening distance: 1170 mm - Min. mould installation height: 480 mm - Platen opening stroke: 1650 mm - Ejector stroke: 250 mm - Ejector force: 95 kN (Reverse: 48 kN) INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 - Injection pressure: 1742 bar - Injection volume: 1953 cm³ - Shot weight for PS: 1777 g - Injection rate: 649 cm³/s - Nozzle contact force: 115 kN Electrical Parameters - Pump drive power: 90 kW - Heating capacity: 44 kW Weight and Dimensions - Net weight: 25.8 t - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m We generally deliver this system in a fully functional basic condition. As the original manufacturer, we can also offer various additional options depending on individual requirements, such as: - Upgrades for energy optimisation of the system - Integration with KraussMaffei digital products, if required - Plasticising unit conversions - Optional: Organisation and management of delivery (not included in the price) - Optional: Installation and commissioning (not included in the price) You benefit from our premium service and the option to purchase spare parts packages for wear components to ensure seamless operation of your newly acquired pre-owned system. Don't hesitate, contact us now for further information!