Kotschenreuther Plateau Mit Holzrungen nakup rabljenega (8.886)

Stanje: rabljeno, prva registracija: 03/2002, naslednji pregled (TÜV): 03/2027, Oprema: ABS, Samo za izvoz Prodaja samo v tujino SPR 324 Kotschenreuther 3 osi Kodjy Dmq Dspfx Al Nedk

Stanje: novo, največja dovoljena obremenitev: 23.800 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete inventory of vehicles available immediately or at short notice on our website. Excerpt of equipment. Full equipment details available upon request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform including sloped frame, corners beveled Kdjdey Aug Rjpfx Al Nok * Approx. 5,350 mm = low-bed platform – flat loading area * Approx. 850 mm = rear ramp slope * Overall width: approx. 2,550 mm (or approx. 3,000 mm with extensions) * Loaded loading height: approx. 870 mm * When assembling tractor-trailer combinations, compliance with the legally permissible overall height and train length must be observed! Chassis/Frame: * Steel welded construction with front frame cranking and rear bevel * Ramp slope with excavator bucket recess in the center = rear depression between longitudinal beams, approx. 2,300 mm long * Integrated into the outer frame: 5 pairs of approx. 4 t lashing lugs (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out lashing rings, approx. 10 t (4x low-bed, 1x on ramp slope, 2x on raised platform) * Standard ball bearing slewing ring Frame attachments: * Both sides of the low-bed platform equipped with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery being transported must not exceed outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, arrangement: 1 pair at the front of the raised platform inside longitudinal beams, 1 pair right and left in the excavator bucket recess at the far rear, 1 pair at the front of the raised platform before the frame cranking, inside beams, 1 pair at the rear of the low-bed before the ramp slope in the bucket recess, left + right Towing device: * Fixed tow bar with swivel coupling eye approx. 40 + 50 mm, cranked design, silent bushing mounting, tow bar retaining spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Tow bar length approx. 1,800 mm Support equipment: * 2 automatic folding support legs at the rear Axles: * SAF air-suspension low-loader axles with drum brakes, load capacity 11 t/axle, S-cam brakes approx. 300/200 mm, automatic brake adjusters Wheels: * 12 tires, size 235/75 R 17.5, 141J, brand as per factory selection Brake system/Suspension: * Brake system according to ECE regulation R13 * Two-line air brake system * Manufacturer Wabco, EBS system 4S3M, 1st and 2nd axle equipped with sensors * RSS/RSP Stability Program * Spring-loaded parking brake on 2nd and 3rd axles * Brake/air connection lines with 2 separate couplings (yellow/red) * EBS/ABS connection cable * Air suspension with lift/lowering function (rear axles only), automatic ride height adjustment from 15 km/h (RTR), with axle bump stop on the front axle Assistance/Safety systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS CAN bus signal for display in the driver’s cab (truck must be prepared accordingly, not a calibrated scale) * Tire pressure monitoring per ECE regulation 141, with pressure sensors in the wheels, for display in the cab (display, etc. must be present in the tractor unit) Floor: * Approx. 50 mm softwood flooring, impregnated, protruding approx. 5–10 mm above the top edge of the frame * Steel chequer plate covers over the wheels Ramps: * 2 foldable, one-piece lightweight steel loading ramps, approx. 2,800 mm long, approx. 750 mm wide, with 35 mm

Stanje: novo, največja dovoljena obremenitev: 30.860 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpts from the equipment specifications. Full equipment details available upon request. Chassis: * Steel welded construction with front frame cranking, chamfered front corners, and rear chamfer, drive-up slope with centrally located excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t lashing brackets, 7 pairs of recessed, retractable approx. 10 t lashing rings (2x on the raised platform, 1x at the front cranked slope, 3x in the low bed between the wheel recesses, 1x on the drive-up slope) 2 Pairs of Wheel Recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located at the front after the cranking, including one-piece drive-over aluminium cover, for max. surface load approx. 11,650 daN each * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between 3rd and 4th axle, including one-piece drive-over aluminium cover, suitable for transporting wheel loaders with wheelbase approx. 2,700 - 3,600 mm, wheel diameter approx. 1,485 – 1,740 mm, maximum rear wheel loader overhang 2,220 mm * Width between the wheel recesses approx. 1,255 mm (outer/outer beam spacing) Frame Attachments: * 5 pairs of stake pockets in the outer frame for rectangular tube stakes approx. 100 x 50 x 5 mm (3x in the low-bed, 2x on the raised platform) * Low-bed platform with extendable width extensions on both sides with softwood planks approx. 50 mm (the track width of machines to be transported must not exceed the external frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distributed as follows: 1 pair at the front on the raised platform inside the longitudinal beams, 1 pair at the very rear in the excavator bucket recess left and right, 1 pair at the front on the raised platform before the cranking inside the longitudinal beams, 1 pair at the rear of the low-bed before the drive-up slope in the excavator bucket recess left and right Towing Device: * Fixed towing drawbar with approx. 50 mm heavy-duty towing eye, cranked design, silent bushing mounting, drawbar holding spring with tensioner * Truck coupling height from approx. 775 mm to 975 mm * Drawbar length approx. 1,800 mm Support Device: * 2 hydraulic rear supports, operated individually, controls housed in a separate stainless-steel box Axles: Kodpey Auhnjfx Al Nedk * SAF air suspension low-bed axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, brand Conti HTR2 (tyre load capacity approx. 12 t/axle) Brake System/Suspension: * Brake system per ECE regulation R13, two-line pneumatic system * Brake system manufacturer Wabco EBS system 4S3M, 1st and 3rd axles sensed * RSS/RSP – stability control programme * Spring-loaded parking brake on the 3rd and 4th axles * Aluminium air tanks for total weight 44 t * Brake/air connection lines with two separate coupling heads, yellow/red * EBS/ABS connection cable * Tension rubber as holder for EBS and electrical connectors * Air suspension with lift and lowering device, operated separately at front and rear * Automatic leveling to programmed driving height from 15 km/h Assistance/safety systems: * SWIT – Schwarzmüller Intelligent Telematics Floor: * Softwood floor, approx. 50 mm, impreg

Stanje: rabljeno, prevoženi kilometri: 756.900 km, moč: 303 kW (411,96 KM), prva registracija: 06/2015, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: rdeča, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna širina: 2.550 mm, skupna višina: 4.000 mm, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.550 mm, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, * DAF CD radio * On-board computer with multifunction steering wheel * Air conditioning * Auxiliary heater * Coffee machine * Cool box ----* Sun visor * Light bar with additional spotlights * Air horns * Rotating beacons * Storage box ----* Rear axle differential lock * Leaf/air suspension * Steerable trailing axle, liftable * Tire pressure monitoring system * Hill start assist * Cruise control ----* Electric/pneumatic jaw-type trailer coupling with DouMatik air connection * Platform body with fixed front wall ----* Tire size front axle: 385/65R22.5 * Tire size rear axle: 315/80R22.5 * Fuel tank: 480 L * AdBlue tank: 85 L * Technical gross weight: 27,000 kg * Curb weight: 12,902 kg * Permissible trailer load: 24,000 kg ----Vehicle ID: 11763----Subject to errors and prior sale----Advertising and various inscriptions have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other services, we can offer the following for an additional charge:----* Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing Kjdpeynd Sxjfx Al Nsdk * Arrangement of financing * Application for export license plates * Vehicle transfer * Vehicle registration * Vehicle recovery and transport ----YOUR VTS TEAM

Stanje: novo, številka stroja/vozila: eca976917d325d4adc41b69e8, lastna masa: 7.200 kg, največja dovoljena obremenitev: 27.800 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r 22,5, Further Information Chassis Semi-Trailer Freight Forwarding High-strength fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, main frame reinforcement for 25 t at the center of gravity over 3 m load length in the retracted state. 13 pairs of welded hooks for lashing strap attachment on the cross members 23 pairs of recessed lashing rings in the outer frame, each rated for 3.5 t Outer frame with load-lock profile for securing lashing straps Kdjdpfxsi Ri Sze Al Nek Note! Not suitable for use with side walls! 24 t 2-speed landing gear in reinforced design for coupling/uncoupling under load, single-sided operation, with semi-circular lower part and straight mounting plate, with push compensation Wheel chocks with holder Aluminum side underrun protection Rear underrun protection Half-shell mudguards With anti-spray flaps in accordance with EC standards 1 spare wheel holder for 1 spare tire, with wheel fastening kit 1 stake storage box sealed on the sides, open at the top, beneath the loading floor, doors on both sides, width = 450 mm / height = 400/420 mm / depth = 2460 mm 6 pairs of extendable stanchion pockets for square stanchions 80x80 mm, extendable from load width 2000 mm to 3100 mm 4 pairs of stanchion pockets recessed in the outer frame, for square stanchions 80x80 mm 11 stanchion pockets embedded centrally in the floor, for square stanchions 80x80 mm, with reinforcement carrier, positioned between the outer stanchion pockets 5 x 3 pairs of stanchion pockets recessed in the outer longitudinal beams, for square stanchions 80x80 mm, including reinforcement carriers – for front and rear load securing during reinforcing mesh transports, 2x5000 mm or 2x6000 mm 6 lightweight insert stanchions, W=80/T=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with upper cable guide for strap tensioning 12 lightweight insert stanchions, W=80/T=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with welded lashing eyes at the bottom on both sides Note: Stanchion pockets and insert stanchions are not designed for the sole securing of long material, pipes, etc. without lashing 2 plastic toolboxes, with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (lock not included) 6 reinforcing steel winches with wire rope and counter hooks, with cable passage through the outer frame, 1 detachable mounting gearbox for the rebar winches – supplied loose (without frame mount) Telescoping Main frame telescopable Extendable by max. 4,000 mm and can be locked in place approx. every 500 mm Locking with pneumatic locking pin + frame lock indicator on both sides, operation via manual button, controls for brake/lock and suspension on the front left of the chassis in front of the axles Storage compartment between longitudinal beams in extended position Axles & Suspension SAF disc brake axles with 430 mm disc diameter Last axle with trailing steering, with automatic reverse lock via reversing light, and additional locking function on the vehicle via manual button, as well as manual switching in the towing vehicle (pin 10), without truck installation. Axle spacing staggered mm Air suspension 1st axle automatic lift axle, additionally electrically controllable from the truck, with traction aid, without truck installation (traction aid functional up to 30% axle overload and up to a speed of max. 25 km/h) Brake System 2-line compressed air brake system Color-coded piping for easy maintenance Spring-loaded par

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2002, lastna masa: 6.200 kg, skupna masa: 34.500 kg, konfiguracija osi: 3 osi, prva registracija: 04/1997, naslednji pregled (TÜV): 05/2025, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65/22.5, medosna razdalja: 1.310 mm, barva: siv, Leto izdelave: 1997, Oprema: ABS, Plato prikolica s 7 vitli za privezovanje, žepi za snemljive stebričke, 16 privezovalnih obročev, prva os dvižna, zadnja os krmiljena, nemško vozilo iz prve roke. Prodaja le podjetnikom in z izključitvijo kakršnega koli jamstva. Dostava v katero koli nemško morsko pristanišče. Kdsdpfemxgcyex Al Njk

Stanje: novo, lastna masa: 5.467 kg, največja dovoljena obremenitev: 33.533 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Leto izdelave: 2026, Oprema: ABS, Lastna teža: 5467 kg, dovoljena skupna masa: 39000 kg, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm. Dimenzija pnevmatik: 385/65 R22.5, 1. os: , 2. os: , 3. os: , zračna vzmetenje, podvozna zaščita, dvižna prednja os, elektronski zavorni sistem EBS, orodjarna, vijakasto šasijo, priključni vtič 1x15 in 2x7-polni, antispray, nadzor tlaka v pnevmatikah, odbijači. Celotno ponudbo naših vozil najdete na . Potrebujete financiranje? Z našimi Value Added storitvami vam nudimo individualne možnosti financiranja, celovite servisne in telematske storitve. Z veseljem vas svetujemo. Kodsy A U E Tjpfx Al Nodk

Stanje: rabljeno, največja dovoljena obremenitev: 32.880 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, Oprema: ABS, Schmitz Cargobull SPL 24/L-13.62EB Flatbed Trailer * Flatbed semi-trailer * Front wall 1,200 mm * 12 container locks / twist locks (1 x 40ft, 2 x 20ft and 1 x 20ft) * Continuous lashing holes in the outer frame * 4 extendable warning panels with position lights * Main beam height: front 156 mm, rear 428+28 mm, Smart Generation * Premium distributor with 3 sockets: 2x7-pin (DIN ISO 3731 + DIN ISO 1185) and ISO 12098 * 8 center stake pockets (8 t floor rating), for 70/70 stakes * 8 pairs of additional stake pockets with stake retention in the external frame for 70/70 stakes * Load capacity per additional stake: up to 400 kg at 1 meter height * 1 row of 70x70 stake pockets, transverse for load securing approx. 2,600 mm before the front wall * Open-top storage box for additional stakes * 16 pairs of lashing rings, 4 t tensile force per ring, per EN 12640 * 28 mm plywood floor, max. 8,000 kg forklift axle load, strength tested to DIN EN 283 * Air suspension * Pneumatic controls * Lift axle * Disc brakes Subject to prior sale and errors excepted! Kdedpot Dhfmofx Al Nek Sale is subject exclusively to our General Terms and Conditions. Important Notice: Despite careful verification of all details in our offer, errors may occur. Some discrepancies may result from data transfer errors in the systems of various platform providers. Therefore, we advise that all information is provided without guarantee and does not represent a legal claim. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Rather, it provides information for contract initiation. The information provided here is without guarantee and does not constitute warranted characteristics.

Stanje: novo, prevoženi kilometri: 100 km, moč: 140 kW (190,35 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, skupna masa: 7.490 kg, dolžina tovornega prostora: 5.800 mm, širina tovornega prostora: 2.300 mm, barva: bela, število sedežev: 3, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, The ISUZU ? Commercial Vehicle Center in Germany, offering expertise, service, and consultancy, presents: ISUZU NPR with automatic transmission and torque converter, JOTHA sliding platform Day registration: 09.12.2024 3-year warranty for the base vehicle from first registration or up to 100,000 km Payload: 3,365 kg Equipment: - 5.2 L turbo diesel with common rail direct injection, 140 kW / 190 HP, EURO VI OBD-E (max torque 510 Nm at 1,600–2,800 rpm) - Particulate filter system with DPD and AdBlue (self-cleaning enabled without workshop visits, thanks to new DPD regeneration technology, which notifies when regeneration is required. Simply press the DPD button, and the system cleans itself in 20 minutes.) - Automated manual transmission (NEES II) with 6 gears; wear-free and precisely controlled starting thanks to the built-in torque converter! Gears can also be shifted sequentially and manually via the selector lever. Depending on load, the driver can preselect whether to start in 1st or 2nd gear at the touch of a button. - Engine brake, cruise control - Front leaf springs (Axle load max. 3,100 kg), rear leaf springs (Axle load max. 5,800 kg) - Tires 215/75 R17.5 M+S - ABS with EBD and electronic traction control for the rear axle (ASR) - Electronic Vehicle Stability Control (EVSC) Kdodpfx Ajucig Uel Nek - Lane Departure Warning - Emergency Brake Assist - Wheelbase: 4,465 mm - Modern cab with excellent space utilization, generous headroom and substantial legroom, excellent ergonomics and visibility, comfortably low entry height - Double door seals reduce sound transmission into the cabin, providing pleasant acoustic comfort. - Cigarette lighter, cup holders, storage compartments in door panels and headliner - Door panel armrests - Air-suspended driver seat - Dual passenger bench, 3-seater - Power windows - Electrically adjustable & heated exterior mirrors - Electronic immobilizer - Central locking with remote control - Radio with Bluetooth hands-free kit - Digital EC tachograph 4.0 (GNNS) - Fog lights, daytime running lights, automatic light sensor - Driver and passenger airbags, headrests - Height and tilt adjustable steering wheel, interior mirror - Spare wheel with mount on chassis - Underbody and chassis corrosion protection - Stainless steel wheel covers - Heated wide-angle mirrors (left & right) - Sun visor for windscreen - Rain and wind deflectors for side windows Bodywork: Vehicle transporter body with JOTHA sliding platform, type JTX 75 AS Loading deck length approx. 5,800 mm Loading deck width 2,300 mm - Sliding platform made of perforated aluminum sheet with end spoiler angle, self-supporting welded design, reinforced with cross members, incl. mounting to chassis. - Patented platform tilting system. - Longitudinal movement of platform by double-acting hydraulic cylinder. Travel distance: 2,500 mm. - Side profiles painted in vehicle color (standard RAL color) - Recessed lashing points right and left at approx. 1,000 mm intervals for load securing. - Two separately adjustable and removable wheel stops. - Headboard and preparation for winch at the front of the platform. - Tow ball for trailer transport

Stanje: novo, prevoženi kilometri: 100 km, moč: 140 kW (190,35 KM), vrsta goriva: dizel, skupna masa: 7.490 kg, barva: bela, vrsta prenosa: samodejen, število sedežev: 3, dolžina tovornega prostora: 5.800 mm, širina tovornega prostora: 2.300 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, The ISUZU commercial vehicle center in Germany, offering expertise, service and consulting, presents: ISUZU NPR automatic transmission with torque converter, JOTHA sliding platform. Day registration: 09.12.2024 3 years warranty on the base vehicle from the date of first registration or up to 100,000 km PAYLOAD: 3,365 kg Equipment: - 5.2 L turbo diesel with common rail direct injection, 140 kW / 190 HP, EURO VI OBD-E (max torque 510 Nm at 1,600–2,800 rpm) - Particulate filter system with DPD system and AdBlue (the self-cleaning system allows filter regeneration without a workshop visit, thanks to the new DPD regeneration technology which indicates when regeneration is needed. You simply press the DPD button and the system cleans itself within 20 minutes) - Automated transmission (NEES II) with 6 speeds; a built-in torque converter ensures wear-free and finely metered starting! Gears can also be shifted sequentially and manually at the selector lever. The driver can preselect, according to load, whether to start in 1st or 2nd gear using a button. - Engine brake, cruise control - Front leaf suspension (max. axle load 3,100 kg), rear leaf suspension (max. axle load 5,800 kg) - Tires: 215/75 R17.5 M+S - ABS with EBD and electronic traction control for the rear axle (ASR) - Electronic Vehicle Stability Control (EVSC) - Lane departure warning system - Emergency brake assist - Wheelbase: 4,465 mm - Modern cab with excellent space utilization, generous headroom, substantial knee room, outstanding ergonomics and visibility, and a comfortably low entry height - Double door seals further reduce noise transmission into the cabin, enhancing acoustic comfort - Cigarette lighter, cup holders, storage compartments in the door panels and roof liner - Armrests integrated in door panels - Suspended driver's seat - Dual passenger bench, 3-seater - Power windows - Electrically adjustable and heated exterior mirrors - Electronic immobilizer - Central locking with remote control - Radio with Bluetooth hands-free system - Digital EC tachograph 4.0 (GNNS) - Fog lamps, daytime running lights, automatic light sensor - Driver and passenger airbags, headrests - Height and tilt-adjustable steering wheel, interior mirror - Spare wheel with carrier on bodywork - Underbody and chassis preservation - Stainless steel wheel covers - Heated wide-angle mirrors left and right - Sun visor for windshield - Rain and wind deflectors for side windows Kodpfx Aovxmtvel Nedk Vehicle body: Car carrier body with JOTHA sliding platform, type JTX 75 AS Platform length approx. 5,800 mm Platform width 2,300 mm - Sliding platform made from perforated aluminum plate profile with spoiler bend at the end, self-supporting welded and reinforced with crossmembers, including installation onto chassis - Patented tilt mechanism for the platform - Longitudinal movement of platform by double-acting hydraulic cylinder, sliding range 2,500 mm - Side profiles painted in vehicle color (standard RAL color) - Recessed lashing points on both sides of the loading deck at intervals of approx. 1,000 mm for securing loads - Two separately adjustable and removable wheel stops - Front frame and preparation for electric cable winch at the front end of the platform - Tow ball hitch for trailer transport

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802011324, lastna masa: 5.340 kg, največja dovoljena obremenitev: 29.660 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2021, dolžina tovornega prostora: 10.000 mm, vzmetenje: zrak, velikost pnevmatike: 385 / 65 R 22,5", barva: siv, Leto izdelave: 2021, The images are archive photos; the vehicle may still be in use! Chassis Semi-Trailer Container Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin 24 t, 2-speed landing gear, single-sided operation, with semi-circular base and straight mounting plate, equipped with load compensation, 2 wheel chocks with holders, aluminium side underrun protection, foldable steel rear underrun guard, half-shell mudguards with anti-spray flaps behind each axle 8 timber bolster cradles as per manufacturer specification, with 16 lashing eye & hook combinations, bolted to frame, each with 2 telescopic timber stakes adjustable from approx. 2000 to 2800 mm, load capacity per pair 7 t. Axles & Suspension SAF disc brake axles with 430 mm disc diameter, air suspension with raise/lower valve, first axle automatic lift axle, additionally manually lowerable, operated via hand control on the vehicle Wheels and Tyres 385 / 65 R 22.5", Athos tubeless steel rims, factory silver Braking System 2-line compressed air braking system, spring-loaded parking brake, 2 interchangeable connectors up front, without connecting hoses, EBS (Electronic Braking System) with EBS socket at the front, without connection cable. NOTE: The trailer may only be towed by vehicles capable of ensuring effective operation of the ABS! Vehicle - Driving Stability System, EBS 2S/2M Electrics 24 Volt, multi-chamber lights, yellow LED side lighting, 2 x 7-pin interchangeable sockets at the front (without connection cable), 2 x reversing lights at the rear Bulkhead Steel/mesh front bulkhead, approx. 2300 mm high Registration / Signs Country of registration: Spain, EC type approval according to 2007/46, prepared for dual licence plate holders (single row) Kdsdpfewk Hcgex Al Nok 1 x plastic, 1 x stainless steel, both interchangeable

Stanje: novo, moč: 238,3 kW (324,00 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, konfiguracija osi: 4x2, medosna razdalja: 4.820 mm, največja dovoljena obremenitev: 11.990 kg, dolžina tovornega prostora: 6.800 mm, širina tovornega prostora: 2.450 mm, emisijski razred: Euro 6, barva: rumena, voznikova kabina: spalna kabina, vzmetenje: jeklo-zrak, Leto izdelave: 2026, Oprema: ABS, airbag, centralno zaklepanje, elektronski program stabilnosti (ESP), kabelska vitla, klimatska naprava, računalnik na krovu, tempomat, zapora diferenciala, DELIVERY TIME: 6 MONTHS FROM ORDER Mercedes-Benz Atego 1224 Wheelbase: 4820 mm Traffic yellow Engine: OM936, inline 6-cylinder, 7.7 l, 175 kW (238 HP), 1000 Nm Euro 6 Air suspension on rear axle LED lights Reversing camera Air conditioning Rear axle differential lock Aluminum rims 6.75 x 17.5, Dura-Bright, Alcoa Many more features Miles 4021 Sliding Platform (hot-dip galvanized) 6800 mm x 2450 mm Technical load capacity: 5000 kg Hammer cable winch 5t Ball coupling on the winch Work lights on mast and rear Ksdpfxjt Hxp Ie Al Nsdk Flashing beacons on mast Stainless steel toolboxes Shovel and broom Trash bin Snatch blocks NATO sockets 12-channel radio remote control for platform and winch Hydraulic box Underlift 3.5t Aluminum tread plates on platform Side step plates for easier access to the platform

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 10.000 km, moč: 129 kW (175,39 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, skupna masa: 7.200 kg, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 2.200 mm, emisijski razred: Euro 6, barva: bela, število sedežev: 3, število prejšnjih lastnikov: 1, Leto izdelave: 2023, Oprema: ABS, airbag, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, kabelska vitla, klimatska naprava, meglenke, navigacijski sistem, parkirni grelec, računalnik na krovu, servovolan, sistem za imobilizacijo, spojka prikolice, spojler, tempomat, Vehicle: Iveco Model: Daily 72C18 Hi-Matic Body: Car transporter / tow truck Fixed bed, full aluminium Curtain body, full aluminium Seating capacity: 3 Driver’s active/comfort seat Fuel: Diesel Engine displacement: 2,998 cm³ Transmission: Automatic Kdsdpewnbv Njfx Al Nsk AdBlue Colour: Red Cargo length: 6,200 mm Cargo width: 2,300 mm Cargo height: 2,200 mm Tow bar: 3,300 kg Winch pulling capacity: 5,900 kg Digital tachograph Twin rear wheels Cornering lights LED headlights LED daytime running lights Tyre size: 225/75 R16 C Factory-installed air suspension Mud flaps Floor mats Driver airbag ABS, ESP, ASR USB / AUX Multifunction steering wheel Power steering Central armrest Cruise control Electrically heated mirrors Electric windows On-board computer Factory-installed electric PTO Seats: Black fabric Central locking with remote control Automatic climate control Radio with Bluetooth function Hands-free system Rear underride guard for cyclists LED work lights LED beacon light Reinforced version Side marker lights in LED Curtainsider tarp on both sides Edscha sliding roof Roll-up tarp at the rear Extra-wide loading ramps - You will receive tailored financing and leasing offers, on request also without a down payment. - You will receive workshop-inspected quality. - We will pick you up free of charge at Paderborn central station. - Your vehicle will be delivered to your door anywhere in Germany at a fair price. - We will organise the registration of your vehicle for you. - We will handle export registrations and export plates for you. - We will accept your current vehicle as trade-in at a fair price.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 15.020 km, moč: 134 kW (182,19 KM), prva registracija: 07/1993, vrsta goriva: dizel, lastna masa: 7.520 kg, konfiguracija osi: 4x4, medosna razdalja: 3.800 mm, naslednji pregled (TÜV): 07/2026, gorivo: dizel, vrsta prenosa: mehanski, vzmetenje: jeklo, Leto izdelave: 1993, Odlično stanje S TÜV Dolžina za nadgradnjo ca. 3,60 m 4x4 pogon na vsa kolesa Listnato vzmetenje Avstrijsko vozilo Kdodpfxsyzrp Hs Al Nek Originalno le 15.020 km Popolno za predelavo v avtodom

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Kjdpjh R Taqefx Al Nodk Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) Kjdpfxemhhy No Al Nedk - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: zelo dobro (rabljeno), Nizkotemperaturni kotel Viessmann Vitoplex/105kw z oljnim kotlom Kedewauaxspfx Al Njdk

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23NEOS06, Exhibition Unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. 99 individually programmable settings Includes 1 remote control – additional units optional Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film powerstretch: 120–400% Motorized pre-stretch system with infinitely variable adjustment Pre-stretch ratio adjustable via control panel from 120 to 400% Film tension electronically monitored via control unit Quick-loading IEF system for easy film roll change Film specification: max. external diameter Ø300 mm – height: 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series At least 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height: “Machine with MAST (pallet included) 2,150 mm Height detection via photo sensor or direct input on display Safety bar for emergency stop of drive unit Emergency stop switch according to CE regulations Audible warning signal and beacon when machine starts Fall protection for film carriage Push button for start & stop Machine operation according to CE standards Ø22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All functional parameters adjustable via display - Program change lock - Adjustable machine speed around pallet up to 80 m/min Carriage speed up and down independently adjustable - Carriage up speed: 1.3 to 5.4 m/min - Carriage down speed: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 layers) - Number of wraps at pallet top (1–10 layers) - Adjustable pallet wrapping height - Film application tension base & top wraps / ascent & descent independently adjustable - Film pre-stretch base & top wraps / ascent & descent independently adjustable - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 savable wrapping programs for SFERA EASY - Cross wrapping (up/down) - Single wrapping (only up or down) - Wrapping cycle with defined start and stop height - Wrapping to a preset height (with photo sensor deactivated) - Wrapping cycle for large-size pallets - Wrapping cycle for top sheet film - Soft start cycle for edge protection application - Wrapping cycle with reinforcement and adjustable number of wraps Soft start for reducing film tears at sharp pallet edges Wrapping cycle with manual or motor stringing (optional) Kjdpfxoyktv So Al Nedk Further machines available from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Leto izdelave: 2021, obratovalne ure: 10 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S21MythoEasyLow04, Ex-demo machine - like new. MYTHO EASY Low Kdsdpfex Ta Nxsx Al Nek Very low-profile unit Wrapping height: 2400 mm Turntable: 1650 mm LP flat turntable: 30 mm low – 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double roping system – see pictures. Automatic film cutting Optional: film clamp on turntable German Schuko plug 6 individually programmable settings Additional demonstration units available from stock for immediate delivery. Prices ex stock Ludwigsburg.

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Exhibition unit Mytho S Kdsdpfx Aloyktrto Nek with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and end of cycle Emergency stop button according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push button for machine power on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program editing F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay for photocell wrapping height F13–F16 – Film application tension at foot & top wraps / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrap (up/down) F01-2 – Simple wrap (only up or only down) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop heights F12 – Wrapping to a predefined height (deactivating the photoelectric height sensor) Kdjdpfx Aoykub Ael Nek F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via push button Optional features: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Installation frame Photoelectric sensor for dark products Film cutting device etc. Additional machines available from stock in Ludwigsburg. Pictures may include optional equipment subject to surcharge. Images similar to actual product.

Leto izdelave: 2026, stanje: novo, Our KVK 1A is an almost identical sister model to the KVK 2 (MA), meaning it is a semi-automatic stretch wrapper with a turntable. In comparison to the KVK 2 MA, it is equipped with a recess that allows for ground-level loading with a manual pallet truck. The only operations that must still be performed manually on this wrapper are attaching and cutting the film. Weighing 700 kg, this model is also designed for professional use and has a load capacity of up to 1,500 kg. The 1A features a 1,500 mm turntable and, as standard, can wrap pallets up to 2,400 mm in height. Both turntable and film carriage speeds are adjustable, and the very finely adjustable electromagnetic brake is controlled via potentiometer, allowing you to tailor the automated wrapping process perfectly to your product. Automatic pallet detection via photocell comes as standard, as do adjustable top and bottom wraps. Wrapping programs are available for "up only," "up & down" (cross wrapping), and "weatherproof" modes. The machine can also be operated manually if required. If the wrapper needs to be relocated temporarily, it can be easily lifted and moved by forklift via integrated cutouts. In addition to a photocell for detecting dark packages or black film, the KVK 1A offers an optional variable wrapping height of up to 3,200 mm. Kdodey Drhzepfx Al Nsk Recommendation: The KVK 1A is ideal where ramps cannot be used due to space constraints or when particularly heavy or unstable goods should not be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Leto izdelave: 2026, stanje: novo, Our KVK 1A is an almost identical sister model to the KVK 2 (MA), meaning it is a semi-automatic stretch wrapper with a turntable. In comparison to the KVK 2 MA, it is equipped with a recess that allows for ground-level loading with a manual pallet truck. The only operations that must still be performed manually on this wrapper are attaching and cutting the film. Weighing 700 kg, this model is also designed for professional use and has a load capacity of up to 1,500 kg. Ksdpfx Aley Drfys Nedk The 1A features a 1,500 mm turntable and, as standard, can wrap pallets up to 2,400 mm in height. Both turntable and film carriage speeds are adjustable, and the very finely adjustable electromagnetic brake is controlled via potentiometer, allowing you to tailor the automated wrapping process perfectly to your product. Automatic pallet detection via photocell comes as standard, as do adjustable top and bottom wraps. Wrapping programs are available for "up only," "up & down" (cross wrapping), and "weatherproof" modes. The machine can also be operated manually if required. If the wrapper needs to be relocated temporarily, it can be easily lifted and moved by forklift via integrated cutouts. In addition to a photocell for detecting dark packages or black film, the KVK 1A offers an optional variable wrapping height of up to 3,200 mm. Recommendation: The KVK 1A is ideal where ramps cannot be used due to space constraints or when particularly heavy or unstable goods should not be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Stanje: rabljeno, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2011, dolžina tovornega prostora: 13.870 mm, širina tovornega prostora: 2.550 mm, Zaradi številnih neresnih e-poštnih sporočil / na e-pošto ne bomo odgovarjali WhatsApp Višina nakladanja 85-90 cm Zadnja os = krmiljena os Pnevmatike 215/75R17,5 Ksdpoxptnqofx Al Njdk BREZ TÜV / BREZ SP "PRIDRŽUJEMO SI PRAVICO DO NAPAK, TIPKARSKIH NAPAK IN VMESNE PRODAJE"

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Generalno obnovljeno, na zalogi, garancija 12 mesecev, brez raztapljalnih peči! -maks. temperatura 250 °C -skupna parna prostornina 20,5 m³ -uporabne mere (D x Š x V) 2300 x 2750 x 2200 mm -krmiljenje Jumo Imago 500 -grelna moč 36 kW -maks. obremenitev pečnega vozička 6000 kg, električni pogon -električne dovodne in odvodne lopute Belimo -odvodni ventilator krmiljen preko frekvenčnega pretvornika -postavitvena mera (D x Š x V) 3000 x 3000 x 3125 mm + tir pred pečjo -lastna teža cca 3500 kg Kdodpfxettbf Us Al Nsk -prosto stoječa stikalna omarica -dokumentacija -električno preizkušeno in z aktualnim DGUV-merilnim protokolom Ogled v naši skladiščni hali po dogovoru. Vozičkasta peč, peč, peči, industrijska peč, krožna peč, komorna krožna peč, površinska peč, toplotna peč, sušilna peč, temperaturna peč, komorna peč, sušilna omara,