Kobelco Sk210 Nlc-10 Oq70 Klimaautomatik 180 Grad nakup rabljenega (35.008)

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 8.300 h, * Kobelco SK210 NLC-10 crawler excavator * Year of manufacture: 2018 * 8,300 operating hours * 124 kW Hino engine * 22,400 kg operating weight * OQ 70 fully hydraulic quick coupler * Undercarriage width: 280 cm * Track pads: 60 cm * Digging bucket: 130 cm Dedeyq Azkspfx Ac Noch * All hydraulic lines fitted * Automatic climate control * 180-degree camera

Stanje: dober (rabljeno), Type: TS -70/1000-10 For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: • Multi-touch control system • USB and Ethernet interfaces • Cable feedthroughs for test cables – 4 × Ø 125 mm • Safety temperature limiter Fields of application: Dcsdpfxoxdi Ezj Ac Neh • Environmental and endurance testing • Temperature cycling tests (stress screening) • Quality assurance and R&D • Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: • Height: approx. 1000 mm • Width: approx. 860 mm • Depth: approx. 1100 mm External dimensions: • Height: approx. 1950 mm • Width: approx. 1270 mm • Depth: approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For any further questions, feel free to contact us by phone.

Stanje: rabljeno, prevoženi kilometri: 10 km, moč: 132 kW (179,47 KM), prva registracija: 06/2026, vrsta goriva: dizel, lastna masa: 2.235 kg, največja dovoljena obremenitev: 1.265 kg, skupna masa: 3.500 kg, velikost pnevmatike: 215/75R16C, konfiguracija osi: 4x2, medosna razdalja: 4.035 mm, naslednji pregled (TÜV): 06/2028, Izpusti CO₂: 166 g/km, poraba goriva (mestna vožnja): 7,7 l/100 km, poraba goriva (izven mesta): 5,9 l/100 km, poraba goriva (kombinirana): 6,6 l/100 km, barva: bela, vrsta prenosa: samodejen, vzmetenje: jeklo, število sedežev: 3, skupna dolžina: 6.363 mm, prostornina tovornega prostora: 17 m³, dolžina tovornega prostora: 4.070 mm, širina tovornega prostora: 1.870 mm, višina nakladalnega prostora: 2.172 mm, Leto izdelave: 2026, velikost sprednje pnevmatike: 215/75R16C, velikost zadnje pnevmatike: 215/75R16C, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), filter saj, garancija za rabljena vozila, kabina, klimatska naprava, meglenke, nadzor oprijema, navigacijski sistem, nizka raven hrupa, računalnik na krovu, sistem za imobilizacijo, spojka prikolice, tempomat, Fiat Ducato Box Van L5H3 (now L4H3 in Series 10 - 9.2) Automatic Transmission Super High Roof 2.2MJ 132kW/180HP Power New Vehicle Expected End of June Latest Model Series 10 (9.2)! Syncom: 6.2 Paint: 549 white MAXI version with 16-inch wheels and large braking system Trailer load: 3,000kg Loading dimensions: 4,070 x 1,870 x 2,172 mm (L x W x H) | Cargo volume: 17 m³ Gross vehicle weight: 3,500kg 38C 'Visibility Plus' Package 051 Rain and light sensor LPZ Fog lights with static cornering lights 9WE Full-LED headlights AWA 'Techno Plus' Package 2PZ Uconnect 10'' Navigation - Infotainment system 316 Rearview camera 140 Automatic climate control with pollen filter RS3 USB interface on dashboard (instead of smoker package) RTK Connected Services RFX Smartphone charging station (wireless charging) 2QF Full digital instrument cluster C7C Premium Cab Package with pneumatic seat 640 Comfort driver's seat with suspension 0XW 'Techno' dashboard 320 Leather steering wheel and leather gear knob 619 Rear wing doors 260-degree opening 835 Overhead storage compartment 245 Steering-wheel radio remote control NHR Cruise control with speed limiter 4BJ Plastic wheel arch trim 8RS Black seat covers with double stitching 049 Steel partition wall 041 Electrically adjustable and heated exterior mirrors 508 Rear parking sensors 293 Dual passenger seat with table 132 Comfort driver's seat with armrest + lumbar support 500 Driver airbag 502 Passenger airbag 5F4 Safety Package Electronic Stability Control: - Crosswind assist - Trailer Stability Control - Post-Collision Braking - Rollover mitigation - Traction control (ASR) - Hydraulic Brake Assist (HBA) - Hill start assist - Adaptive load control (LAC) Safety kit: - Emergency brake assist (pedestrian and cyclist detection) - Lane departure warning - Traffic sign recognition - Drowsiness alert - Intelligent speed assist 5EM Tinted headlights 4DH 980 Full-size spare wheel with onboard tools 01P Acoustic pedestrian reversing warning 5DE Dedpfszbvh Sjx Ac Nsch

Stanje: rabljeno, prevoženi kilometri: 10 km, moč: 132 kW (179,47 KM), prva registracija: 06/2026, vrsta goriva: dizel, lastna masa: 2.235 kg, največja dovoljena obremenitev: 1.265 kg, skupna masa: 3.500 kg, velikost pnevmatike: 215/75R16C, konfiguracija osi: 4x2, medosna razdalja: 4.035 mm, naslednji pregled (TÜV): 06/2028, Izpusti CO₂: 166 g/km, poraba goriva (mestna vožnja): 7,7 l/100 km, poraba goriva (izven mesta): 5,9 l/100 km, poraba goriva (kombinirana): 6,6 l/100 km, barva: bela, vrsta prenosa: samodejen, vzmetenje: jeklo, število sedežev: 3, skupna dolžina: 6.363 mm, prostornina tovornega prostora: 17 m³, dolžina tovornega prostora: 4.070 mm, širina tovornega prostora: 1.870 mm, višina nakladalnega prostora: 2.172 mm, Leto izdelave: 2026, velikost sprednje pnevmatike: 215/75R16C, velikost zadnje pnevmatike: 215/75R16C, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), filter saj, garancija za rabljena vozila, kabina, klimatska naprava, meglenke, nadzor oprijema, navigacijski sistem, nizka raven hrupa, računalnik na krovu, sistem za imobilizacijo, tempomat, Fiat Ducato Panel Van L5H3 (now L4H3 in Series 10 - 9.2) Automatic Transmission, Super High Roof, 2.2MJ 132KW/180HP Power, New vehicle incoming for end of June. Latest Series 10 (9.2) model! Dcodjzbviiopfx Ac Neh - Syncom: 6.2 - Paintwork: 549 White - MAXI version with 16-inch tires and large braking system - Towing capacity: 3,000 kg - Cargo space dimensions: 4,070 x 1,870 x 2,172 mm (L x W x H) - Loading volume: 17 m³ - Gross Vehicle Weight: 3,500 kg 38C Package 'Visibility Plus': - 051 Rain and light sensor - LPZ Fog lights with static cornering function - 9WE Full LED headlights AWA Package 'Techno Plus': - 2PZ Uconnect 10" Navigation – Infotainment system - 316 Rear view camera - 140 Automatic climate control with pollen filter - RS3 USB interface on dashboard (instead of smokers package) - RTK Connected Services - RFX Smartphone charging station (wireless charging) - 2QF Fully digital instrument cluster C7C Premium Cabin Package with comfort seat - 640 Comfort driver's seat, suspension seat - 0XW 'Techno' dashboard - 320 Leather steering wheel and leather gear knob - 619 Rear wing doors, 260-degree opening - 835 Overhead storage compartment - 245 Steering wheel radio remote control - NHR Cruise control with speed limiter - 4BJ Plastic wheel arch covers - 8RS Black seat upholstery with double stitching - 049 Steel partition - 041 Electrically adjustable and heated exterior mirrors - 508 Rear parking sensors - 293 Twin passenger seat with integrated table - 132 Comfort driver's seat with middle armrest + lumbar support - 500 Driver's airbag - 502 Passenger airbag 5F4 Safety Package – Electronic Stability Control: - Crosswind Assist - Trailer Stability Control - Post-Collision Braking - Rollover Prevention - Traction Control (ASR) - Hydraulic Brake Assist (HBA) - Hill Start Assist - Adaptive Load Control (LAC) Safety Kit: - Emergency Brake Assist (pedestrian & cyclist detection) - Lane Departure Warning - Traffic Sign Recognition - Drowsiness Alert - Intelligent Speed Assist - 5EM Tinted headlights - 4DH 980 Full-size spare wheel with tool kit - 01P Acoustic pedestrian rear warning - 5DE

Stanje: novo, moč: 132 kW (179,47 KM), vrsta goriva: dizel, lastna masa: 2.235 kg, največja dovoljena obremenitev: 1.265 kg, skupna masa: 3.500 kg, velikost pnevmatike: 215/75R16C, konfiguracija osi: 4x2, medosna razdalja: 4.035 mm, Izpusti CO₂: 166 g/km, poraba goriva (mestna vožnja): 7,7 l/100 km, poraba goriva (izven mesta): 5,9 l/100 km, poraba goriva (kombinirana): 6,6 l/100 km, barva: bela, vrsta prenosa: samodejen, vzmetenje: jeklo, število sedežev: 3, skupna dolžina: 6.363 mm, prostornina tovornega prostora: 17 m³, dolžina tovornega prostora: 4.070 mm, širina tovornega prostora: 1.870 mm, višina nakladalnega prostora: 2.172 mm, Leto izdelave: 2026, velikost sprednje pnevmatike: 215/75R16C, velikost zadnje pnevmatike: 215/75R16C, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), filter saj, garancija za rabljena vozila, kabina, klimatska naprava, meglenke, nadzor oprijema, navigacijski sistem, nizka raven hrupa, računalnik na krovu, sistem za imobilizacijo, tempomat, Fiat Ducato Panel Van L5H3 (now L4H3 in Series 10 - 9.2) Automatic Transmission, Super High Roof, 2.2MJ 132KW/180HP Power, New Vehicle in Production, Available End of June. Latest Series 10 (9.2) model! Syncom: 6.2 Paint: 549 white MAXI version with 16-inch wheels and large brake system Towing capacity: 3,000kg Cargo area dimensions: 4,070 x 1,870 x 2,172 mm (L x W x H) Cargo volume: 17 m³ Gross vehicle weight: 3,500kg 38C Visibility Plus Package: - Rain and light sensor (051) - Front fog lights with static cornering function (LPZ) - Full LED headlights (9WE) AWA Techno Plus Package: - Uconnect 10'' Navigation - Infotainment System (2PZ) - Reversing camera (316) - Automatic climate control with pollen filter (140) - USB interface on dashboard (replaces smoker's package) (RS3) - Connected services (RTK) - Smartphone charging station (wireless charging) (RFX) - Fully digital instrument cluster (2QF) C7C Premium Cab Package with Suspension Seat: - Comfort driver's seat, suspension seat (640) - Techno dashboard (0XW) - Leather steering wheel and leather gear knob (320) Other Features: - Rear wing doors, 260° opening (619) - Roof storage compartment (835) - Steering wheel radio remote control (245) - Cruise control with speed limiter (NHR) - Plastic wheel arch covers (4BJ) - Black seat upholstery with double stitching (8RS) - Steel partition wall (049) - Electrically adjustable and heated exterior mirrors (041) - Rear parking sensors (508) - Passenger double bench with table (293) - Comfort driver's seat with center armrest + lumbar support (132) - Driver airbag (500) - Passenger airbag (502) 5F4 Safety Package: Djdpfxszbvics Ac Nsch Electronic stability control, including: - Crosswind assist - Trailer sway control - Post-collision braking - Rollover mitigation - Traction control (ASR) - Hydraulic brake assist (HBA) - Hill start assist - Adaptive load control (LAC) Safety kit: - Emergency brake assist (pedestrian and cyclist detection) - Lane keeping assist - Traffic sign recognition - Driver drowsiness alert - Intelligent speed assistant Other Equipment: - Dark-tinted headlights (5EM) - Full-size spare wheel with on-board tools (4DH, 980) - Acoustic pedestrian reversing warning (01P) - (5DE) Professional translation for commercial vehicle platforms such as Machineseeker or TruckScout24.

Stanje: rabljeno, Leto izdelave: 2006, Liebherr stolpni žerjav 180 EC-H 10 Litronic, tovarniška številka 45.455 Rabljeni Liebherr stolpni žerjav 180 EC-H 10 Litronic, letnik 2006. Ponujen je zgornji del žerjava z iztegom 50,0 m. Primeren za visokogradnjo, industrijo in večja gradbišča. Proizvajalec: Liebherr Model: 180 EC-H 10 Litronic Tip stroja: stolpni žerjav Tovarniška številka: 45.455 Leto izdelave: 2006 Izteg: 50,0 m Nosilnost: 10 t Upravljanje: Litronic Izvedba: samo zgornji del žerjava Dsdpsy Thfbjfx Ac Njch Področje uporabe: visokogradnja, industrija, gradbišča Stanje: rabljen

Stanje: rabljeno, Leto izdelave: 2005, Liebherr zgornji stolpni žerjav 180 EC-H 10 Litronic, identifikacijska številka 44.173 Dedpsy Thdqjfx Ac Nsch Rabljen zgornji stolpni žerjav Liebherr 180 EC-H 10 Litronic, letnik 2005. Ponujamo zgornji del žerjava z iztegom 45,0 m. Primeren za visoke gradnje, industrijo in velike gradbene projekte. Proizvajalec: Liebherr Model: 180 EC-H 10 Litronic Tip stroja: zgornji stolpni žerjav Identifikacijska številka: 44.173 Letnik: 2005 Izteg: 45,0 m Razred nosilnosti: 10 t Krmiljenje: Litronic Izvedba: le zgornji del žerjava Področje uporabe: visoke gradnje, industrija, gradbišča Stanje: rabljeno

Stanje: rabljeno, WTT 180° Courbe à Rouleaux 640-600 IR500 RA1803 Dodpfx Ajk Abfijc Nech Données techniques : Largeur de châssis (NB) : 640 mm Largeur utile rouleaux (EL) : 600 mm Pas de rouleaux : 5:6 Rouleaux : Ø50mm, galvanisés Entraxe (Tlg) : 105 mm Angle de convoyage : 180° Rayon intérieur (IR) : 500 mm Hauteur (BH) : 80 mm (bord supérieur des rouleaux) Guidage latéral extérieur : 185 mm Entraînement : sans Pieds : sans Construction : châssis laqué gris, rouleaux galvanisés En option : Pieds disponibles Tous les prix s’entendent hors TVA, départ entrepôt central Dr. Sonntag GmbH & Co KG, 97076 Würzburg Pour un conseil individuel et professionnel, contactez-nous simplement. Contactez-nous par téléphone ou par mail. Nous vous aidons volontiers pour la planification et la réalisation de vos projets. Au plaisir de vous lire ou de vous entendre. Cordialement, L’équipe de Dr. Sonntag GmbH & Co. KG Votre spécialiste et interlocuteur en intralogistique.

Stanje: rabljeno, Leto izdelave: 2006, Liebherr zgornje-vrtljivi stolpni žerjav 180 EC-H 10 Litronic – doseg 60 m, nosilnost 10 t; 45.456 Zgornje-vrtljivi stolpni žerjav z Litronic upravljanjem, ponujen kot zgornji del brez stolpa. Proizvajalec: Liebherr Model: 180 EC-H 10 Litronic Leto izdelave: 2006 Tovarniška številka: 45.456 Doseg: 60,0 m Maksimalna nosilnost: 10000 kg Nosilnost pri 60 m: 2200 kg Izvedba: zgornji del žerjava (brez stolpa) Upravljanje: Litronic Djdpfx Aoyy I R Dsc Njch Dolgost iztega in višina kljuke lahko po dogovoru povečamo!

Stanje: rabljeno, Leto izdelave: 2006, Liebherr Obendreherkran 180 EC-H 10 Litronic – doseg 40 m, nosilnost 10 t, serijska številka 44.997 Zgornjeobratni stolpni žerjav z Litronic krmiljenjem, ponujen kot zgornji del žerjava brez stolpa. Proizvajalec: Liebherr Model: 180 EC-H 10 Litronic Serijska številka: 44.997 Leto izdelave: 2006 Doseg: 40,0 m Največja nosilnost: 10.000 kg Nosilnost pri 40 m: 4.750 kg Izvedba: zgornji žerjav (brez stolpa) Dodpfeyy I Ivex Ac Nsch Krmiljenje: Litronic Možno podaljšanje iztega po dogovoru!

Stanje: novo, moč: 206 kW (280,08 KM), vrsta goriva: dizel, velikost pnevmatike: 295/80R22.5, konfiguracija osi: 4x2, medosna razdalja: 4.190 mm, gorivo: dizel, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 3, vzmetenje: jeklo, Oprema: klimatska naprava, = Dodatne možnosti in oprema = - Listnato vzmetenje Dcsdsyxmf Depfx Ac Noh = Dodatne informacije = Menjalnik: 6-stopenjski, ročni Dimenzije pnevmatik: 295/80R22.5 Vzmetenje: listnato Prednja os: krmiljena Dovoljena skupna masa: 18.000 kg

Leto izdelave: 2022, stanje: rabljeno, 10.000 Food Grade večglava polnilna linija, popolnoma opremljena z dozirnim lijakom s kapaciteto 300 kg, ki glede na potrebe stroja dovaja produkt v vedra dvigala in ga aplicira v večglave zalogovnike za servisiranje Doypack strojev. Možnost postavitve na dveh etažah (kot na sliki) ali uporaba stolpne konstrukcije. Vsi večglavi zalogovniki so dostopni za vzdrževanje in enostavno čiščenje, PLC nadzor omogoča programiranje tako v večglavi enoti kot tudi na Doypack strojih. (2022). Država izvora: Združeno kraljestvo Dsdpfx Acsy Rzfvo Noch Lokacija: Ti loti se nahajajo v Burnham-on-Crouch, Essex, UK. Na lokaciji ni razpoložljivih možnosti nakladanja, demontaža in nalaganje sta na stroške kupca. Vsa/katerekoli orodja so ponujena tako, kot je posebej opisano. Ponudbe so možne pred dražbo.

Stanje: zelo dobro (rabljeno), Weiss Type: WK11-1000/40 For sale is a professional climate test chamber Weiss Umwelttechnik WT-WK 1000/40, equipped with a fully automatic cold-regenerating adsorption dryer. Dcjdpfxjx Hxkzo Ac Noh The installed components currently in the test compartment can be removed if required. At present, due to these installations, the switch cabinet is limited to an operating temperature range of −40°C to +60°C. After dismantling these components, the manufacturer can extend the temperature range back to the standard values of −40°C to +180°C, as the existing installations are not suitable for these high temperatures. The unit is suitable for precise temperature and humidity testing on components, assemblies, and devices. Ideal for applications in industry, development, quality assurance, and research. Weiss climate test chamber, water-cooled Specifications for temperature testing: - Temperature range: -40°C to +60°C - Temporal temperature fluctuation at workspace center: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±2.0 K - Temperature change rate: - Heating: 4 K/min - Cooling: 3 K/min Specifications for climate testing: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98% r.H. - Temporal temperature fluctuation at workspace center: ±0.1 to ±0.3 K - Spatial temperature deviation: ±0.5 to ±1 K - Temporal humidity fluctuation at workspace center: ±1 to ±3% r.H. Heat compensation: - Within +25°C to +95°C - At relative humidity up to 90%: 500 W Humidification system specifications: - Reservoir volume: 20 liters - Water quality: demineralized - pH value: 6 to 7 - Conductivity: 5 to 20 µS/cm³ - Water consumption: - At constant +40°C, 92% r.H.: 21/24 h Temperature gradient (according to IEC 60068-3-5): 1 to 2 K Test chamber interior dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm Exterior dimensions: Height: 1980 mm, Width: 1385 mm, Depth: 1850 mm Test chamber volume: approx. 990 liters Rated voltage: 3/N / PE AC 400 V + 10% 50 Hz Rated power: 11.5 kW, Rated current: 22.0 A Refrigerant: R 404A Weight: 840 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data remain reserved!) Feel free to contact us by phone for any further questions.

Leto izdelave: 2006, stanje: rabljeno, največja debelina roba: 12 mm, hitrost pomika os X: 40 m/min, višina plošče: 60 mm, dolžina plošče: 2.400 mm, širina plošče: 1.000 mm, številka stroja/vozila: 0-202-48-1184, No reserve price – guaranteed sale to the highest bidder! Collection of the machine must take place between 10.06.26 and 30.06.26! The machinery package consists of four machines as follows: Item 1 – KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Movement system with frame Suction cups Dodoy Ur Hlepfx Ac Nsch Item 2 – HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Bonding system: PUR, Laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Max. panel length: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling unit Corner rounding unit Grooving unit Pressure system Panel support guides NC positioning Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically sequenced engagement NC unit positioning Unit 2: Double milling top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm NC positioning Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically sequenced engagement NC positioning Gluing and edging system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel edge Edge processing units Number of edge processing units: 8 Edge processing unit 1: End trimming unit Number of motors: 2 NC positioning Edge processing unit 2: Rough trimming top and bottom Number of motors: 2 Edge processing unit 3: Fine trimming for flush and radius milling Number of motors: 2 NC positioning Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change NC positioning Edge processing unit 5: Milling/planing unit Number of motors: 1 Unit 5 motor power: 12 kW Unit 5 speed: 10,000 rpm Automatic tool change NC positioning Edge processing unit 6: Edge scraping blade NC positioning Edge processing unit 7: Glue scraping blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Item 3 – KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Movement system with frame Suction cup system Item 4 – LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return conveyor for edge banding machine Max. panel width: 1,000 mm Max. panel length: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial descriptive documents. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8522

Stanje: pripravljen za uporabo (rabljen), Heidenhain ERN 180 5000 01-03 enkoder. 377 104-96, rabljen, običajne sledi uporabe, 100% delujoč, dobava kot na fotografijah. Dsdpfx Aoi Eah Uoc Noch

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 107 kW (145,48 KM), prostornina žlice: 1,6 m³, Leto izdelave: 2016, številka stroja/vozila: HHKHZ603PG0000278, stroj je rabljen, v celoti delujoč Dcjdpfxsyllc Ho Ac Nsh

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 128,4 kW (174,58 KM), obratovalna teža: 26.500 kg, Leto izdelave: 2014, obratovalne ure: 8.700 h, Oprema: hidravlika prijemala, hidravlično kladivo, klimatska naprava, JCB JZ255 NLC kratkorepi goseničar Leto izdelave 2014 8700 delovnih ur 26500 kg 128,4 kW Isuzu motor Popolnoma hidravlična hitra menjava Oilquick OQ 70/55 Nastavljiva roka Podporni ščit Hidravlična jarka žlica Samodejna klimatizacija Kamera Podvozje širine 3 m Kratki rep Dodpfx Aoy Sxyyjc Njch

Stanje: novo, Leto izdelave: 2021, Transnorm Belt Curve Conveyor Left 180°-1270-1100-IR1200 -- NEW RA1945 Technical Data: Conveyor length (center radius/NL): 5498 mm Frame width (NB): 1270 mm Frame width with bearing cover: 1390 mm Frame width with bearing and gearbox cover: 1480 mm Belt width (GuB): 1100 mm Overall height (BH): 250 mm Height of bottom-mounted motor: 300 mm Motor height (MH): 550 mm Inside radius (IR): 1200 mm Conveying angle: 180° degrees Dcedpfx Acjq N Hmho Noh Average conveying speed (v m/s): 1.4 m/s Drive: SEW motor with frequency inverter Electrical data: 50Hz V380-500, 3 kW / S1 Belt: KT 96 new Year of manufacture: 2021 Side guide height: 194 mm Optional accessories: Supports Prices are net, plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For a tailored, professional consultation, simply contact us by phone or email. We are happy to assist you with planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor Left GKF 180°-750-550 IR1000 RA1483 The Transnorm belt curve is in good condition (used) and fully operational. It is equipped with a SEW brand gear motor. Support legs are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for internal transport of unit loads and are indispensable in modern distribution centers. Dodjk Abcrspfx Ac Noch Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating times are no problem. Tapered rollers and a specially developed belt guiding system ensure maximum smoothness and quiet operation. The images shown of the conveyor system were taken while it was still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 4820 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Height (BH): 210 mm Inner radius (IR): 1000 mm Curve angle: 180° degrees Support legs: optionally available Conveying speed (v m/s): infinitely variable up and down with frequency inverter Drive: SEW gear motor SA37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double-layered, green, smooth, KT36 (wear as per pictures) Year of construction: 2001 Special features/accessories: Side guides included on both sides Optionally available: Support legs Net price plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual expert advice, simply get in touch with us. Contact us by phone or email. We will be happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 180 mm, pomik po osi Z: 42 mm, skupna višina: 1.650 mm, skupna masa: 1.200 kg, proizvajalec krmilnikov: FAGOR, model krmilnika: 8055tc, število osi: 2, Stroj Pinacho Smart Turn 180/42 1000 je bil izdelan leta 2012. Gre za robusten horizontalni stružni stroj z dolžino struženja 1000 mm, prehodom vretena 42 mm in stružnim premerom 360 mm. Opremljen je z 8-pozicijskim revolverjem in krmilnikom Fagor 8055tc. Dimenzije znašajo 2,5 x 1,15 x 1,65 m, teža pa približno 1,2 t. Izkoristite priložnost za nakup tega horizontalnega stružnega stroja Pinacho Smart Turn 180/42 1000. Za dodatne informacije nas kontaktirajte. Dcedpfx Ajx D Ivfsc Neh • Stružni premer: 360 mm • Dolžina struženja: 1000 mm • Revolver: 8-pozicijski vdi20 • Stroj je še pod napetostjo • Vpenjalna glava: premer 200 mm. Dimenzije Globina stroja: 2500 mm Tehnične specifikacije Pogonska orodja: Ne Proti-vreteno: Ne

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 141 kW (191,71 KM), vrsta goriva: dizel, obratovalna teža: 25.500 kg, Leto izdelave: 2015, obratovalne ure: 15.300 h, Oprema: dodatne luči, hidravlika prijemala, hidravlično kladivo, kabina, klimatska naprava, Gosenicarski bager Komatsu PC240 NLC-10, letnik 2015, z 15.300 delovnimi urami, hidravlična planirna žlica, hitra menjava, čisto stanje, takoj pripravljen za uporabo, transportna širina 3 m, klima, možen prevoz in dostava. Ogled možen po dogovoru, tudi ob vikendih. Pripravimo tudi carinsko / izvozno dokumentacijo. Dcjdoxwwzdjpfx Ac Noh

Stanje: dober (rabljeno), Leto izdelave: 2004, Rabljena konvencionalna upogibna stiskalnica Baykal Dcjdpfjy Tuiysx Ac Njh Tip APH 3110 180 Kapaciteta 3100 x 180 ton Nastavljivi zadnji omejevalnik in nastavitev globine Vpenjanje Amada / Euro Vključen je 1 komplet orodja

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. no.: 18622 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 All Electric Year of manufacture: 2008 Clamping Unit Clamping force: 100 t Opening stroke: 380 mm Tie bar distance (h x v): 470 x 420 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 35 mm Shot volume: 115 cm³ Shot weight (PS): 103 g Injection pressure: 1600 bar Dimensions and Weights Dimensions (LxWxH): 4.8 x 1.4 x 2.2 m Weight: 5,500 kg Additional Information & Extras Core pull: 1 unit Additional Information: The Sumitomo (SHI) Demag IntElect series belongs to the category of high-precision, all-electric injection moulding machines, developed specifically for technical plastic parts, automotive applications, electronic components, and demanding serial production. All main machine movements are powered by direct-drive servo-electric motors. Injection, dosing, mould movements as well as ejector functions are fully electric, ensuring highest precision, excellent repeatability, and maximum process stability. The IntElect series is particularly renowned for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approx. 60% up to 80% can be achieved depending on the application. At the same time, the reduced heat generation lowers the cooling demand and reduces overall operating costs. Dcjdpfoy Ub D Tox Ac Njh The machine features a direct servo injection and metering system, enabling very short response times and highly precise injection control. The injection unit is equipped with 4 heating zones, providing homogeneous plastification and stable process conditions, especially for technical plastics. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low-noise and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for high-speed serial production Thanks to its long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series is still among the most sought-after all-electric injection moulding machines on the market.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18621 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 All Electric Year of manufacture: 2008 Clamping unit Clamping force: 100 t Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight PS: 103 g Injection pressure: 1600 bar Dimensions and weight Dimensions (LxWxH): 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional information: The Sumitomo (SHI) Demag IntElect series is among the highly precise, all-electric injection moulding machines, specifically developed for technical plastic components, automotive applications, electronic parts, and demanding high-volume production runs. All main machine movements are driven by direct-drive servo-electric motors. Injection, dosing, mould movement, and ejector functions are carried out entirely electrically, enabling maximum precision, excellent repeatability, and optimal process stability. The IntElect series is particularly noted for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved, depending on the application. Lower heat generation simultaneously reduces cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, which allows very fast response times and provides highly precise injection control. The injection unit comes with 4 heating zones for homogeneous plasticising and stable process conditions, especially when processing technical plastics. Key benefits of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for fast, high-volume production runs Dcjdpfjy Ub D Hjx Ac Nsh Thanks to their long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after all-electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18619 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 All Electric Year of manufacture: 2008 Dedpfsy Ub Dtox Ac Noch Clamping Unit Clamping force: 100 tons Opening stroke: 380 mm Tie bar distance (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight (PS): 76 g Injection pressure: 2,180 bar Dimensions and Weight Machine dimensions LxWxH: 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional Information: The Sumitomo (SHI) Demag IntElect series comprises high-precision, all-electric injection moulding machines specifically designed for technical plastic components, automotive applications, electronic parts, and demanding mass-production runs. All major machine movements are powered by direct-drive servo electric motors. Injection, dosing, mould movements, and ejector operations are executed fully electrically, allowing for maximum precision, outstanding repeatability, and optimum process stability. The IntElect series is especially valued for its low energy consumption and high production accuracy. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved, depending on the application. At the same time, the minimal heat generation reduces cooling requirements and overall operating costs. The machine is equipped with a direct servo-driven injection and dosing system, enabling extremely fast response times and highly precise injection control. The injection unit features four heating zones, ensuring homogeneous plasticizing and stable process conditions, particularly with technical polymers. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low-noise and low-vibration operation * High dynamic servo performance * Minimal maintenance requirements * Clean production environment * Ideal for technical and precision parts * Suitable for high-speed series production Due to their long service life, stable production performance, and high energy efficiency, Sumitomo Demag IntElect machines remain among the most sought-after all-electric injection moulding machines on the market today.