Kk-Industries Profilstahlschere Sahinler Kki Hkm-65 Zwei Zylinde nakup rabljenega (33.183)

Stanje: novo, Punching force: 65 t Weight approx.: 1,600 kg Height: 1,880 mm Motor: 5.5 kW Width: 1,700 mm Blade length: 10 mm Throat depth: 305 mm Stroke: 55 mm - With one cylinder - 5 workstations: punching, notching station, as well as flat bar, round bar, and angle steel shearing stations. Supplied in the following configuration: Hodpsttc Utjfx Agienk - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Selector switch for setup and operation modes - Support table with stops at the notching and flat bar stations - Support table with stops at the punching station - CE-compliant design SPECIFICATION / VALUE Punching force: 65 t Throat depth: 305 mm Stroke: 55 mm Strokes per min. (at 20 mm stroke): 25 Plate thickness (max.): Ø 26 x 20 mm Working height: 900 mm Shearing capacity: - 375 x 15 mm - 300 x 20 mm Angle steel 45° (one leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 380 mm Round: 45 mm Square: 45 mm Material thickness: 10 mm Width: 1,700 mm Depth: 950 mm Motor power: 5.5 kW Supply voltage: 400 V / 50 Hz Height: 1,880 mm Weight: 1,600 kg

Stanje: novo, Punching force: 55 t Approx. weight: 1,520 kg Height: 1,880 mm Motor: 5.5 kW Hjdpettc Upefx Agijnk Width: 1,500 mm Blade length: 317 mm Throat depth: 255 mm Stroke: 60 mm - Equipped with one cylinder - 5 workstations: Punching, notching station, as well as flat, bar, and angle steel shear stations. Equipped with: - Hydraulic and electrical components from renowned manufacturers - Support table at the punching station with scales and stops - Support table at the notching and flat steel stations with stops - Electric length stop 1,000 mm for automatic cut triggering - Selector switch for setup and operation modes - Technical documentation - Lighting - 2 foot pedals - CE-compliant FEATURE DESCRIPTION / VALUE Punching force: 55 t Throat depth: 255 mm Stroke: 60 mm Strokes per min. (with 20 mm stroke): 25 Max. sheet thickness: Ø 20 x 20 mm Working height: 900 mm Shearing capacity: 300 x 15 mm, 200 x 20 mm Angle steel 45° (1 leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 317 mm Round: 40 mm Square: 40 mm Material thickness: 10 mm Width: 1,500 mm Depth: 950 mm Motor power: 5.5 kW Mains voltage: 400 V, 50 Hz Height: 1,880 mm Weight: 1,520 kg

Stanje: novo, Dimensions (LxWxH): 1520 x 950 x 1780 mm Approx. weight: 1,440 kg Total power requirement: 4 kW Square steel: 35 mm Round steel: 40 mm Punching force: 60 t Throat depth: 220 mm Flat bar shear: 200 x 20 mm or 300 x 15 mm Notching (thickness x width x depth): 10 x 42 x 100 mm Punching – round: 28 x 15 mm or 38 x 11 mm or 110 x 3 mm Angle iron cutting 90° or 45°: 120 x 120 x 12 mm or 80 x 8 mm - With single cylinder - 5 workstations: punching station, notching station, and shear stations for flat, bar, and angle steel. Scope of delivery: - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Selector switch for set-up and operation modes - Support table with stops at notching and flat steel stations - Support table with stops at punching station - CE version PROPERTY DESCRIPTION / VALUE Punching force: 60 t Hnsdod Ab Hyepfx Agiok Throat depth: 220 mm Stroke: 55 mm Strokes per min. (at 20 mm stroke): 25 Max. sheet thickness Ø 28 x 15 mm Working height: 955 mm Flat bar shear Cutting capacity: 300 x 15 mm / 200 x 20 mm Angle steel 45° (1 leg): 80 x 80 x 8 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 317 mm Round: 40 mm Square: 35 mm Material thickness: 10 mm Width: 1,520 mm Depth: 950 mm Motor output: 4.0 kW Mains voltage: 400 V, 50 Hz Height: 1,780 mm Weight: 1,440 kg

Stanje: novo, Dimensions (LxWxH): 1500 x 950 x 1680 mm Weight approx.: 1,165 kg Hedpfx Aed Ab Hzjgisnk Total power requirement: 4 kW Square steel: 25 mm Round steel: 30 mm Punching force: 45 t Throat depth: 220 mm Flat bar shear: 200 x 15 mm or 300 x 12 mm Notching (thickness x width x depth): 8 x 35 x 75 mm Punching - round: 22 x 15 mm or 38 x 8 mm or 100 x 3 mm Angle steel cutting 90° or 45°: 100 x 100 x 10 mm or 70 x 6 mm - Single cylinder model - 5 workstations: punching, notching, flat, bar, and angle steel cutting stations. Features: - Hydraulic and electrical components from renowned manufacturers - Foot pedal - CE-compliant version - Technical documentation - Selector switch for setup and operating mode - Support table with stops at notching and flat bar station - Support table with stops at the punching station Punching force: 45 t Throat depth: 175 mm Stroke: 50 mm Strokes per min. (at 20 mm stroke): 20 Max. sheet thickness: Ø 20 x 20 mm Working height: 900 mm Flat bar shear cutting capacity: 300 x 12 mm / 200 x 15 mm Angle steel 45° (single leg): 70 x 70 x 6 mm Angle steel 90°: 100 x 100 x 10 mm Blade length: 316 mm Round: 30 mm Square: 25 mm Material thickness: 8 mm Width: 1,430 mm Depth: 950 mm Motor power: 4.0 kW Mains voltage: 400 V / 50 Hz Height: 1,680 mm Weight: 1,165 kg

Stanje: novo, Dimensions (LxWxH): 2040 x 950 x 2180 mm Approx. weight: 2,940 kg Total power requirement: 11 kW Square steel: 50 mm Throat: 355 mm Round steel: 55 mm Flat bar shear: 380 x 25 mm Notching (thickness x width x depth): 13 x 60 x 100 mm Punching – Round: 34 x 26 mm or 55 x 16 mm or 110 x 5 mm Angle steel cutting 90° or 45°: 150 x 150 x 16 mm or 80 x 10 mm Pressure: 115 t With two cylinders, hydraulic 5 Workstations: - Punching station - Notching station, as well as flat bar, bar, and angle steel cutting stations Includes the following features: - With two hydraulic cylinders - Support table at the notching and flat bar stations with stops - Hydraulic and electrical components from renowned manufacturers - Support table at the punching station with scales and stops Hnedsh Hvniepfx Agisk - Support table at the notching and flat bar station with stops - 1,000 mm electric length stop for automatic cutting activation - Selector switch for setup and operation modes - Technical documentation - Lighting - 2 foot pedals - CE compliant PROPERTY DESCRIPTION / VALUE Model: HKM 115 Punching force: 115 t Throat: 355 mm Stroke: 80 mm Strokes per min. (at 20 mm stroke): 25 Max. plate thickness: Ø 34 x 26 mm Working height: 935 mm Shearing capacity: 600 x 15 mm; 380 x 25 mm Angle steel 45° (single leg): 80 x 80 x 10 mm Angle steel 90°: 150 x 150 x 16 mm Blade length: 610 mm Round: 55 mm Square: 50 mm Material thickness: 13 mm Width: 2,040 mm Depth: 950 mm Motor power: 11.0 kW Network voltage: 400 V / 50 Hz Height: 2,180 mm Weight: 2,920 kg

Stanje: novo, Dimensions (LxWxH): 2730x1150x2280 mm Approximate weight: 6000 kg Total power requirement: 11 kW Square steel: 55 mm Round steel: 65 mm Punching force: 175 kN Throat depth: 625 mm Flat bar shear: 380x30 mm or 600x20 mm Notching (Thickness x Width x Depth): 16x60x100 mm Punching – Round: 40x32 mm or 57x22 mm or 125x5 mm Angle steel cutting at 90° or 45°: 200x200x20 mm or 80x10 mm - 5 workstations - with 1 foot pedal Hedpfx Ageh Hvnmjijnk - hydraulic drive - table at the punching station and notching station with stop - operating manual in GERMAN and ENGLISH We have many references!

Stanje: novo, Punching force: 85 t Throat depth: 355 mm Stroke: 80 mm Blade length: 482 mm Motor: 7.5 kW Height: 2040 mm Approximate weight: 2,315 kg With two cylinders, hydraulic Hodpfx Ajh Hrx Esgienk 5 working stations: punching station, notching station, and flat bar, round bar, and angle bar shearing stations. Execution: - Hydraulic and electrical components from renowned manufacturers - Technical documentation - Support table at the punching station with scales and stops - Support table at the notching and flat bar station with stops - Electric longitudinal stop 1000 mm for automatic cutting activation - Selector switch for setup and operation mode - Lighting - 2 foot pedals - CE-compliant design FEATURE DESCRIPTION / VALUE Punching force: 85 t Throat depth: 355 mm Stroke: 80 mm Strokes per min. (at 20 mm stroke): 25 Sheet thickness (max.): Ø 33 x 20 mm Working height: 940 mm Shearing capacity: 480 x 15 mm, 380 x 20 mm Angle steel 45° (1 leg): 80 x 80 x 8 mm Angle steel 90°: 150 x 150 x 15 mm Blade length: 482 mm Round: 50 mm Square: 50 mm Material thickness: 13 mm Width: 1,920 mm Depth: 950 mm Motor power: 7.5 kW Power supply: 400 V, 50 Hz Height: 2,040 mm Weight: 2,315 kg

Stanje: novo, Shaft diameter: 580 mm Working speed: 3-6 m/min Motor power: 30 kW Length: 2760 mm Width: 2310 mm Height: 2680 mm Approx. weight: 14,400 kg Hnjdpfx Ajh Alh Hjgijk Technical specifications: - Welded frame made of steel construction - 3 rollers driven - Hardened and ground shafts made from high-strength special steel - Rollers are hardened and ground - Horizontal and vertical working position - Standard hardened rollers - Mobile control panel - Angular side guide rollers - Brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit 10Screen EURO 11,500,--

Stanje: novo, Dimensions (LxWxH): 0.80 x 0.85 x 1.20 m Approx. weight: 0.61 t Total power requirement: 4 kW Sheet thickness: 6 mm Details: - Hydraulic drive, 6 mm at fixed 90° - Blade length: 200 mm Hedpfx Asd Ab Icsgijnk - Clipping angle: 90°

Stanje: novo, Shaft diameter: 60 mm Upper roll diameter: 215 mm Hedpfx Agod Ab H Roienk Lower roll diameter: 215 mm High-performance hydraulics: 16 l/min Working speed: 4 m/min Motor power: 1.5 kW Length: 1000 mm Width: 1400 mm Height: 1650 mm Approx. weight: 950 kg Technical Data: - Welded steel frame - 3 rolls are driven by motor - Hardened shafts made of special steel - Upper roll hydraulically adjustable - Horizontal and vertical operating positions - Standard rolls - Guide rolls - Equipped with a brake motor for precision bending - Portable control panel Options: - Digital readout EURO 700 - NC unit EURO 7,000 - Lateral angle guide rolls EURO 1,400 HPK 50 file Type Size Min. Dia Notes 1 60x10 20x10 600 300 Standard Rolls 2 100x15 50x10 600 300 Standard Rolls 3 35x35 15x15 600 300 Standard Rolls 4 Ø35 Ø20 600 300 Optional Rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7 70x30x3 30x15x2 1500 400 Optional Rolls 8 50x3 20x2 1600 400 Optional Rolls 9 50x50x6 30x30x3 600 400 Optional Rolls 10 50x50x6 30x30x3 900 600 Optional Rolls 11 60x7 30x4 600 400 Standard Rolls 12 60x7 30x4 700 400 Standard Rolls 13 60x7 30x4 700 400 Standard Rolls 14 UPN 80 UPN 30 800 400 Optional Rolls* 15 UPN 80 UPN 30 1200 600 Standard Rolls* * Special washer (spacer) may be required / Only with the special beam bending attachment • Capacities are based on a plate yield strength of 260 N/mm²

Stanje: novo, Dimensions (LxWxH): 1.10 x 1.15 x 1.40 m Hnodpfxjd Ab Ido Agisk Approx. weight: 1,150 kg Total power requirement: 4 kW Sheet thickness: 6 mm Details: - Hydraulic drive - Blade length: 200 mm - Notching angle adjustable from 60–140°, 6 mm - Notching angle adjustable from 30–59°, 4 mm

Stanje: novo, Shaft diameter: 50 mm Upper roll diameter: 152 mm Lower roll diameter: 162 mm High-performance hydraulics: 8 Working speed: 4.5 m/min Motor power: 1.1 kW Length: 810 mm Width: 950 mm Height: 1500 mm Approx. weight: 500 kg Hnjdpfod Ab H Sox Agijk Technical Data: - Welded steel frame - 3 rolls are motor-driven - Hardened shafts made of special steel - Upper roll hydraulically adjustable - Horizontal and vertical working positions - Standard rolls - Guide rolls - Brake motor for precision bending - Portable control panel Options: - Digital display €700 - NC unit €7,000 - Angular side guide rolls €1,400 HPK 50 file Type Size Min. Dia Notes 1 60x10 20x10 600 300 Standard Rolls 2 100x15 50x10 600 300 Standard Rolls 3 35x35 15x15 600 300 Standard Rolls 4 Ø35 Ø20 600 300 Optional Rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7 70x30x3 30x15x2 1500 400 Optional Rolls 8 50x3 20x2 1600 400 Optional Rolls 9 50x50x6 30x30x3 600 400 Optional Rolls 10 50x50x6 30x30x3 900 600 Optional Rolls 11 60x7 30x4 600 400 Standard Rolls 12 60x7 30x4 700 400 Standard Rolls 13 60x7 30x4 700 400 Standard Rolls 14 UPN80 UPN30 800 400 Optional Rolls * 15 UPN80 UPN30 1200 600 Standard Rolls * * Special washer (spacer) may be required / Only with special Beam Bending Attachment • Capacities are based on 260 N/mm² yield strength of plate

Stanje: novo, Shaft diameter: 480 mm Hjdpoh Alh Rofx Agijnk Working speed: 3-6 m/min Motor power: 22 kW Length: 2500 mm Width: 2200 mm Height: 2300 mm Weight approx.: 9300 kg Technical data: - Welded frame made of steel construction - 3 driven rolls - Hardened and ground shafts made of high-strength special steel - Rolls are hardened and ground - Horizontal working position - Hardened standard rolls - Mobile control panel - Lateral angle guide rolls - Equipped with brake motor for precision bending - Digital readouts (2 units) Options: - STANDARD digital readout - NC unit 10 Screen EURO 11,500,--

Stanje: novo, Shaft diameter: 580 mm Working speed: 2-5 m/min Motor power: 30 kW Length: 3000 mm Width: 2310 mm Height: 3100 mm Weight approx.: 16,500 kg Technical specifications: - Welded steel frame construction - 3 driven rollers - Hardened and ground shafts made of high-strength special steel - Rollers are hardened and ground - Horizontal working position - Standard hardened rollers - Mobile control panel - Lateral angle guide rollers - Brake motor for precision bending - Digital displays (2 units) Options: Hodpoh Alh Ujfx Agionk - STANDARD digital display - NC unit 10” screen EURO 11,500,-- -

Stanje: rabljeno, Further technical data available on request Ride-on Scrubber Dryer KKI ASSM 650 with automatic drive and disc brushes Demo special price EUR 6,899 Product Information KKI 650 Ride-on Scrubber Dryer - Ride-on scrubber dryer Very compact ride-on scrubber dryer with a 65 cm working width and an extremely small turning radius for cleaning in confined spaces - Extremely maneuverable – on-the-spot turning - Multiple small disc brushes with increased contact pressure Description: - Battery-powered ride-on scrubber dryer with automatic drive and disc brushes - The very compact size provides this model with the necessary agility to operate effectively in tight spaces, allowing for easy navigation around obstacles - Control panel with operating elements - Manual operation of brush, squeegee, and water flow via levers - Tiltable dirty water tank for easier cleaning - Multiple small disc brushes with directly mounted squeegee enable a short design and a very small turning radius - Disc brushes with individual motors increase contact pressure - Automatic release of the squeegee upon accidental collisions to prevent damage Features: - Drive motor - Central, curved squeegee - 2-tank system - Hour meter - Fresh water tank with quick-fill hose - Automatic speed regulation - Automatic water and brush stop - Battery charge indicator Scope of delivery: - 4 disc brushes - Battery - Charger - Cleaning area: 3,000 sqm - Working capacity: 3,250 sqm/h - Brush working width: 650 mm - Suction width: 750 mm - Speed: 5 km/h - Brush diameter: 4 x 180 mm - Brush pressure: 22 kg - Brush speed: 190 rpm - Fresh water tank: 65 l - Dirty water tank: 65 l - Power supply: 24 V battery - Total power: 1,650 W - Rated voltage: 24 V - Length: 1,150 mm - Width/Depth: 780 mm Hnjdpel Iir Ijfx Agiek - Height: 1,425 mm - Weight (net): 220 kg

Stanje: novo, Sheet length: 4,000 mm Sheet thickness: 20.0 mm Cutting width: 4,000 mm Total power requirement: 22 kW Weight approx.: 20,000 kg Dimensions (LxWxH): 4,850 x 2,300 x 2,180 mm Technical Data: Sheet thickness: 20 mm Cutting length: 4,000 mm Cutting angle: 2.30° Backgauge: motorized, 1,000 mm Motor power: 22 kW Hnsdpfxexxd D Us Agiok Length: 4,850 mm Width: 2,300 mm Height: 2,180 mm Weight: 20,000 kg Equipment: Swing beam design NC preselection control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the front via control panel Motorized backgauge up to 1,000 mm User-friendly control panel mounted on a swing arm Hydraulic hold-downs positioned close to the cutting line Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball inserts Upward-folding finger guard, 1,000 mm 1 side gauge with T-slot 2 sheet support arms with T-slot Simple blade replacement and regrinding Adjustable cutting length for economical processing Lower blade, reversible 4 times Upper blade, reversible 2 times Qualified after-sales service Operating manual in ENGLISH Machine and equipment conform to CE regulations

Stanje: novo, Pressure: 150 Bending length: 3050 mm Frame gap: 3050 mm Installation height: 590 mm Max. stroke length: 300 mm Dimensions (LxWxH): 4740x2000x2680 mm Weight approx.: 9500 kg Motor power: 22 kW CNC crowning via control: yes CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-15030 Servo-motorized Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and, due to their flexibility and reliability, represent the technology of tomorrow. The higher speed and precision of this new machine generation offers improved efficiency, ergonomic features, and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and capacities, Dener is a pioneer of this technology, bringing extensive experience and quality. Standard Equipment: KK-Industries holds the general agency of the DENER group. We have configured a high-quality model for Europe. The CNC servo electric press brake KK-Industries, made by DENER, includes: Technological Advantages, Model REVOLUTION DDM: The CNC servo electric press brake is characterized by high precision, accuracy, and versatile application possibilities. - 100% electric, 0% hydraulic oil - Up to 50% reduced energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy Hodpfx Aod Etf Eogisnk - High bending speed and significantly quieter - Usable full frame length - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment Includes: 3D color graphics controller DELEM 66T with 17-inch touchscreen Y1, Y2, X, and R axes controlled by CNC CNC crowning via 3D control X-axis 500 mm, R-axis stroke 150 mm (for 1.5 m and 2 m models) X-axis 750 mm, R-axis stroke 250 mm (on other press brakes) We make no compromise on tooling, equipping the KKI REVOLUTION CNC servo electric press brake with quality tools from EUROSTAMP Italy. Segmented gooseneck upper tool 4-V die block 60x60 (V = 16, 22, 35 and 50 mm) Back gauge with servo motors on linear guide and ballscrew Of course, a machine is only as good as its service. Therefore, we focus on highly qualified staff with long-standing experience in CNC sheet metal processing. Laser safety device on the upper beam CE safety equipment Operating manuals in GERMAN and ENGLISH Options: Additional controlled axes for backgauge: X1, X2, R, Z1, Z2, Delta X ATF type 6-axis backgauge, X1, X2 - R type backgauge X-Prime type backgauge Hydraulic upper and lower tool clamping for WILA tools CNC 3D touchscreen DELEM DA-69T control KK-Industries GmbH

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Hsdpfxjd Ab Hhj Agionk Weight approx.: 8,500 kg Dimensions (LxWxH): 4,650 x 1,700 x 1,800 mm Technical data: Sheet thickness: 6 mm Cutting length: 4,200 mm Cutting angle: 1.50° Backgauge: motorized, 1,000 mm Motor power: 7.5 kW Length: 4,650 mm Width: 1,700 mm Height: 1,800 mm Weight: 8,500 kg Equipment: Swing cut system NC preset control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the front via the control system Motorized backgauge up to 1,000 mm Clear control panel mounted on swivel arm Hydraulic hold-downs arranged close to the cutting edge Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball transfers Foldable finger guard 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot Easy replacement and regrinding of blades Adjustable cutting length for efficient processing Lower blade with four cutting edges, reversible Upper blade with two cutting edges, reversible Qualified customer service Operating instructions in ENGLISH Machine and equipment in accordance with CE regulations

Stanje: novo, Sheet length: 4,200 mm Sheet thickness: 13.0 mm Cutting width: 4,200 mm Total power requirement: 18.5 kW Weight approx.: 13,800 kg Dimensions (LxWxH): 4,650 x 2,270 x 2,000 mm Technical Specifications: Sheet thickness: 13 mm Cutting length: 4,200 mm Cutting angle: 1.80° Back gauge: motorized, 1,000 mm Motor power: 18.5 kW Length: 4,800 mm Width: 1,270 mm Height: 2,000 mm Weight: 13,800 kg Features and Equipment: Swing cut design NC pre-selection control ELGO P 40 T Touch with back gauge and cutting gap adjustment operated from the control panel motorized back gauge up to 1,000 mm clearly arranged control panel mounted on swivel arm hydraulic hold-downs arranged close to the cutting edge foot switch cutting gap adjustment cutting line illumination wide support table with ball rollers foldable finger guard, 1,000 mm 1 side gauge with T-slot 2 sheet support arms with T-slot easy blade changing and regrinding adjustable cutting length for efficient processing bottom blade usable 4 times (quadruple rotating) top blade usable 2 times (reversible) Hnodpfxed Ab Hij Agiek qualified customer service Operating manual in ENGLISH Machine and equipment comply with CE regulations

Stanje: novo, Pressure: 100 Hjdpfx Aswwngtogijnk Cylinder: horizontally adjustable Stroke: 350 mm Stand width: 1050 mm Working speed: 2 mm/s Rapid traverse: 28 mm/s Length: 1900 mm Width: 850 mm Height: 2250 mm Weight approx.: 1030 kg Cylinder horizontally adjustable: 650 mm - Cylinder adjustable horizontally - 650 mm Height-adjustable work table – conveniently adjustable via chain Safe two-hand operation – convenient control via hand lever and push button Adjustable maximum pressure – individually adaptable for various applications Integrated manometer – enables precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for particularly precise and efficient work Image is a sample photo

Stanje: novo, Pressure: 20 tons Cylinder: stationary Stroke: 350 mm Frame width: 520 mm Working speed: 4 mm/sec Return speed: 30 mm/sec Length: 1200 mm Width: 500 mm Height: 1800 mm Approximate weight: 210 kg Hedowwnhkjpfx Agisnk Height-adjustable work table – manually adjustable for maximum operational flexibility Safe two-hand operation – convenient control via hand lever and push button Adjustable maximum pressure – can be customized for various applications Integrated pressure gauge – enables precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for especially precise and efficient work

Stanje: rabljeno, Further technical data available on request. The scrubber-dryer with a 55 cm working width and semi-automatic drive is the ideal machine for cleaning small to medium-sized areas, even those with stubborn dirt. It is designed for high productivity, low operating costs, and extremely simple operation. - Battery-powered scrubber-dryer with semi-automatic drive, disc brush, and dirty water suction - The floor is left dry and safe with just one pass - Designed for high productivity, low operating costs, and very simple use - Automatic squeegee release on accidental impacts protects against damage - Yellow-colored maintenance points for quick and easy servicing - Adjustable dosing of cleaning solution - Automatic water and brush stop when the machine is not in operation - Mechanical operation of brush and squeegee via levers Cleaning area: 1,000–1,600 m² Theoretical productivity: 1,450 m²/h Working width (brushes): 510 mm Working width (suction): 680 mm Packaging unit: 1 Dimensions & weights: Length: 1,165 mm Width/depth: 541 mm Height: 995 mm Weight: 61.5 kg Brushes Brush diameter: 510 mm Brush pressure: 27.5 kg Brush speed: 160 rpm Electrical connection Total power: 870 W Power supply: 24 V battery Battery runtime: 240 min Hnedpfsl Iir Sjx Agiok Battery charging time: 12 h Operating voltage: 24 V Tanks Fresh water: 40 l Dirty water: 42 l

Stanje: novo, Pressure: 20 Bending length: 900 mm Frame width: 900 mm Installation height: 325 mm Stroke length (max.): 150 mm Dimensions (LxWxH): 1760 x 1280 x 2190 mm Approx. weight: 1950 kg Motor power: 3.8 kW Electric ball screw CNC press brake KK Industries Model REVOLUTION B-Servo 900 mm x 20 t Standard equipment: KK-Industries is the general representative of the DENER group. We have assembled a high-quality model for Europe. The CNC Servo Electric Press Brake, KK-Industries made by DENER: Technological Advantages: Model REVOLUTION B-Servo 900 mm 20 t - High speeds with ball screw drive - The CNC servo electric press brake stands out for its high precision, accuracy, and versatile application possibilities Hjdpfxsd H Hh De Agisnk - 100% electric, 0% hydraulic oil - Up to 40% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter operation - Reduced maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Technical Specifications Bending Length (B): 900 mm Bending Capacity (Pressing force): 20 tons Maximum Stroke: 150 mm Daylight Opening (Q): 325 mm Approaching Speed: 150 mm/s Bending Speed: 20 mm/s Return Speed: 150 mm/s Power: 3.8 kW Weight: 1950 kg Overall Length (A): 1760 mm Width (C): 1280 mm Height (D): 2190 mm KK-Industries GmbH There's something for everyone!

Stanje: novo, Pressure: 70Cylinder: fixedStroke: 350Frame width: 900Working speed: 3Length: 1700Width: 700Height: 2100Weight approx.: 650Rapid advance: 29Height-adjustable worktable – conveniently adjustable via chain Safe two-hand operation – easy control via hand lever and push button Adjustable maximum pressure – individually adaptable for a wide range of applications Integrated manometer – allows precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating manual – detailed and comprehensible, available in German and English Two working speeds – for especially precise and efficient work Hsdpfxswwnh Dj Agionk Image is for illustration purposes only

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 10 mm Total power requirement: 11 kW Weight approx.: 8,100 kg Dimensions (LxWxH): 4,000 x 1,950 x 1,900 mm Technical Data: Sheet thickness: 10 mm Cutting length: 3,200 mm Cutting angle: 1.50° Backgauge: motorized, 1,000 mm Motor power: 11 kW Length: 4,000 mm Width: 1,950 mm Height: 1,900 mm Weight: 8,100 kg Equipment: Swing beam design NC preset control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the controller at the front Motorized backgauge up to 1,000 mm Clearly arranged control panel mounted on a swing arm Hydraulic hold-downs arranged close to the cutting edge Foot switch Hjdpfx Agjd Ab Hnoijnk Cutting gap adjustment Cutting line illumination Wide support table with ball inserts Foldable finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot Easy replacement and regrinding of blades Adjustable cutting length for economical processing Bottom blade with 4 usable cutting edges Top blade with 2 usable cutting edges Qualified customer service Operating manual in ENGLISH Machine and equipment in accordance with CE regulations