Kk-Industries Cyl-St 200-25/7.0 nakup rabljenega (62.969)

Stanje: novo, Bending length: 2600 mm Sheet thickness: 7 mm Top roller diameter: 200 mm Technical data: - Back roller motorized - Cone bending device - Hardened and polished rollers - Entire body made of St 52 steel - Asymmetrical design for perfect bending - Top and bottom rollers driven by brake electric motors and planetary gearboxes within the transmission - Portable control panel - In compliance with CE standards Hodjd Ab Ngjpfx Aagonk Options: - Bottom roller driven by electric motor: EURO 2,200 - Digital display for rear roller position: EURO 1,010 - Extended rollers: EURO 966 - Profile rollers: EURO 1,190 We have numerous references!

Stanje: novo, Bending length: 3100 mm Sheet thickness: 6 mm Top roll diameter: 200 mm Technical specifications: Hsdpfx Ajd Ab Nfsagonk - Rear roll motorized drive - Cone bending device - Hardened and polished rolls - Complete frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearboxes - Portable control panel - Compliant with CE standards Options: - Bottom roll driven by electric motor: EUR 2,200 - Digital display for rear roll position: EUR 1,010 - Extended rolls: EUR 966 - Profile rolls: EUR 1,190 We have numerous references!

Stanje: novo, Bending length: 2,600 mm Sheet thickness: 6 mm Upper roll diameter: 190 mm Sheet length: 2,600 mm Technical data: - Rear roll motorized - Conical bending device - Hardened and polished rolls Hnjdsd Ab Nkspfx Aagjk - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Upper and lower rolls driven by brake electromotors and planetary gears in the gearbox - Portable control panel - In compliance with CE standards Options: - Lower roll driven by electric motor EURO 1,925 - Digital display for rear roll position EURO 1,010 - Extended rolls EURO 966 - Profile rolls EURO 1,190 We have numerous references!

Stanje: novo, Bending length: 2600 mm Sheet thickness: 4 mm Top roller diameter: 140 mm Sheet length: 2,600 mm Technical Data: - Rear roller driven by motor - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearbox - Portable control panel - Complies with CE standards Hodod Ab Nrepfx Aagsnk Options: - Bottom roll driven by electric motor EURO 1,513 - Digital display for rear roller position EURO 1,010 - Extended rolls EURO 966 - Profile rolls EURO 1,190 We have numerous references!

Stanje: novo, Bending length: 2600 mm Hnedpod Ab Nnofx Aagjk Sheet thickness: 5 mm Upper roller diameter: 170 mm Technical specifications: - Rear roller powered by motor - Cone bending device - Hardened and polished rollers - Entire frame made of St 52 steel - Asymmetric design for perfect bending results - Upper and lower rollers driven by brake motors and planetary gearbox - Portable control panel - In compliance with CE standards Options: - Lower roller driven by electric motor: EUR 1,650 - Digital display for rear roller position: EUR 1,010 - Extended rollers: EUR 966 - Profile rollers: EUR 1,190 We have numerous references!

Stanje: novo, Bending length: 2100 mm Sheet thickness: 8 mm Top roll diameter: 200 mm Technical specifications: - Rear roll driven by motor - Cone bending device - Hardened and polished rolls - The entire frame is made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gears in the gearbox - Mobile control panel - In compliance with CE standards Options: - Bottom roll driven by electric motor EUR 2,200 - Digital display for rear roll position indication EUR 1,010 - Extended rolls EUR 966 - Profile rolls EUR 1,190 We have numerous references! Hnjdpfx Aaed Ab Nhjgok

Stanje: novo, Bending length: 2100 mm Sheet thickness: 7 mm Top roller diameter: 190 mm Technical specifications: - Rear roller driven by motor - Cone bending device - Hardened and polished rollers - The entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rollers driven by brake electric motors and planetary gears in the gearbox Hodpfx Aed Ab Nloagjnk - Portable control panel - In compliance with CE standards Options: - Bottom roller driven by electric motor EURO 1,925 - Digital display for rear roller position EURO 1,010 - Extended rollers EURO 966 - Profile rollers EURO 1,190 We have numerous references!

Stanje: novo, Bending length: 2100 mm Sheet thickness: 6 mm Upper roll diameter: 170 mm Technical data: - Rear roll motorized drive - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending Hnedpfx Aaod Ab Npjgek - Top and bottom rolls driven by brake electromotors and planetary gears in the gearbox - Portable control console - In compliance with CE standards Options: - Bottom roll driven by electric motor EUR 1,650 - Digital display for rear roll position EUR 1,010 - Extended rolls EUR 966 - Profile rolls EUR 1,190 We have numerous references!

Stanje: novo, Dolžina upogibanja: 3100, Debelina pločevine: 4, Premer zgornjega valja: 170 Standardne lastnosti: Zadnji valj z motorjem Naprava za stožčasto upogibanje Kaljeni in polirani valji Ohišje iz jekla ST 52 Zgornji valj se po upogibanju bočno odpira za lažje odstranjevanje materiala Asimetrična zasnova za popolno upogibanje Za popoln rezultat sta zgornji in spodnji valj gnana z elektromotorjem z zavoro in planetnim zobniškim pogonom Ustreza CE-standardom Hnedpsd Ab Nmjfx Aagjk Prenosna upravljalna konzola za upravljanje stroja z različnih mest OPTIONALNO EnotaKos Neto cena (€) Spodnji valji z motorjem1 1.205 € Digitalni prikazovalnik za zadnji valj1 815 € Podaljšani valji1 788 €

Stanje: novo, Bending length: 1600 mm Sheet thickness: 8 mm Top roller diameter: 170 mm Technical Data: - Back roller driven by motor - Cone bending device - Hardened and polished rollers - Entire frame made from St 52 steel - Asymmetric design for perfect bending results - Top and bottom rollers driven by brake electromotors and planetary gearboxes - Portable control desk - In compliance with CE standards Hjdpfod Ab Nqsx Aagjnk Options: - Bottom roller driven by electric motor: EUR 1,650 - Digital display for back roller position: EUR 1,010 - Extended rollers: EUR 966 - Profile rollers: EUR 1,190 We have numerous references!

Stanje: novo, Bending length: 1600 mm Sheet thickness: 6 mm Top roller diameter: 140 mm Technical data: - Rear roller powered by motor Hjdpfxsd Ab Nts Aagenk - Cone bending device - Hardened and polished rollers - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rollers driven by brake electric motors and planetary gearboxes - Portable control panel - In compliance with CE standards Options: - Bottom roller powered by electric motor EURO 1,512,-- - Digital display for rear roller position EURO 1,010,-- - Extended rollers EURO 966,-- - Profile rollers EURO 1,190,-- We have a large number of references!

Stanje: novo, Bending length: 3100 mm Sheet thickness: 5 mm Top roll diameter: 190 mm Technical specifications: - Rear roll motor-driven - Cone bending device - Hardened and polished rolls - The entire frame is made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearboxes - Portable control panel - In compliance with CE standards Options: - Bottom roll driven by electric motor EURO 1,925.00 - Digital display for rear roll position EURO 1,010.00 - Extended rolls EURO 966.00 - Profile rolls EURO 1,190.00 Hnjdpod Ab Nisfx Aagok We have a large number of references!

Stanje: novo, Pressure: 125 Bending length: 3200 mm Distance between uprights: 2655 mm Main motor: 11 kW Maximum ram stroke: 200 mm Machine model: KK Industries 125x3200, 4 axes (Y1-Y2-X-R) with CNC crowning Rated force: 125 t Bending length: 3200 mm Distance between columns: 2655 mm Throat depth: 400 mm Ram stroke: 200 mm Maximum opening height: 455 mm Ram down stroke speed: 180 mm/s Ram return speed: 160 mm/s Ram working speed: 13 mm/s Main motor power: 11 kW CNC system: ZY68 Number of controlled axes: 4+1 Oil tank capacity: 300 L Back gauge X-axis travel: 600 mm X-axis speed: 200 mm/s Positioning accuracy: ±0.10 mm Repeatability: ±0.015 mm Back gauge motor power: 0.85 kW Back gauge R R-axis travel: 150 mm R-axis speed: 100 mm/s Positioning accuracy: ±0.10 mm Repeatability: ±0.015 mm Dimensions: Length: 3450 mm Width: 1580 mm Hnodpfjwacqxox Aagok Height: 2550 mm Weight: 7100 kg Delem T53 control (surcharge €5,000)

Stanje: novo, x-axis travel: 4000 mm y-axis travel: 2000 mm z-axis travel: 250 mm Pump output for flushing: 37 kW Control: Siemens PLC touch screen, direct import of usable DXF files Max. output pressure: 5500 bar Abrasive delivery system for waterjet cutting machines – fill weight 350 kg OMAX vacuum sensor for monitoring abrasive feed to the nozzle Sensor for monitoring pump pressure In waterjet cutting, water is pressurized up to 5500 bar. Depending on the requirements and workpiece, it is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. Since the waterjet process works without heat input, material deformation is avoided. By adding abrasive, waterjet cutting achieves maximum precision with tolerances of +/- 0.01 mm. Our flexible production enables both vertical and bevel cuts. We are happy to receive your custom CAD files. Waterjet technology provides significant advantages for industry, trade, and custom prototyping. It is also environmentally friendly as waterjet cutting operates dust-free and steam-free, while also conserving material. Waterjet cutting: example gallery What already sounds impressive in theory is even more striking in the finished product. We have compiled a selection of images to demonstrate our capabilities in waterjet cutting. Click through our sample gallery to see what is possible with this modern processing technology. Waterjet will find the ideal solution for your application! Advantages - No deformation in the cutting area - Cutting without thermal input - Material saving - High precision: +/- 0.1 mm - Cutting area: x = 4010 mm; y = 2010 mm; z = 250 mm - Flexible manufacturing - Vertical and bevel cuts - Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM - Environmentally friendly, dust- and steam-free Hjdpjd Ab Uujfx Aagsnk We cut everything! All materials shaped, including: - Aluminium - Steel - Brass - Copper & bronze - Other precious metals - Glass - Granite & marble - Tiles - composites - Foam material cuts - Rubber - Plastics - Plexiglas Optional: Oil cooler                                                                € 10,725.00 Water filtration system                                              € 1,430.00 Sludge extraction system                                            € 10,725.00 Professional water treatment system                        € 10,725.00 An oil cooler must be present during commissioning!!! Operation for longer than 1 hour is only possible with an oil cooler.

Stanje: novo, Pressure: 125Motor: 22Installation height: 500Stroke length (max.): 400Table size: 800 x 600 x 120Ram area: 800 x 600 x 300Table height: 850Dimensions (LxWxH): 1,600 x 2,000 x 3,200Weight approx.: 7,000Oil fill: 400Control / Key switch: 1. Setup mode Manual without light sensor (max. 10 mm/sec. speed) 2. Automatic (at full speed) with light sensor Main cylinder: Ø 220 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Auxiliary guides: 2 pcs Ø 50 mm Motor: 15 kW – 22 hp (IE-3) Pump: 48 liters / ASC Speed: Forward 120 mm/sec – Return 140 mm/sec – Pressure: 13 mm – 5 mm/sec Installation height: 500 mm Stroke length: 400 mm Table plate: 800 x 600 x 120 mm (with T-slots) (customized design possible) Ram plate: 800 x 600 x 300 mm (with T-slots & ribbed welding) Table height: 850 mm (floor to top of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10 – 125 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Hnjdpjmr Hpcsfx Aagjk Swivelling operator panel Safety PLC – SICK Light sensors SICK 700 + 150 mm Linear scale for setting stroke length 9” PLC screen – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) Double workspace lighting 8 free inputs & outputs on the PLC for external connections The press complies with machinery directives Hydraulic proportional valves Two-channel cable protection Operating manual & parts list (German) With lateral safety door (doors slide to the rear)

Stanje: novo, Press force: 63 t Bending length: 2500 mm Distance between uprights: 1980 mm Motor: 11 kW Ram stroke (max.): 150 mm Opening width: 400 mm CNC Press Brake KK Industries 63x2500, 4 axes Y1-Y2-Y-X-R with CNC Crowning Technical Specifications: Pressing force: 63 t Bending length: 2500 mm Distance between columns: 1980 mm Throat depth: 300 mm Ram stroke: 150 mm Maximum opening: 400 mm Ram approach speed: 180 mm/s Ram return speed: 170 mm/s Ram working speed: 14 mm/s Main motor output: 11 kW CNC system: ZY68 Number of controlled axes: 4+1 Oil tank capacity: 150 L Back Gauge: X-axis: X-axis travel: 600 mm X-axis speed: 200 mm/s Positioning accuracy: ±0.10 mm Repeat positioning accuracy: ±0.015 mm Motor power: 0.85 kW R-axis: R-axis travel: 150 mm R-axis speed: 100 mm/s Positioning accuracy: ±0.10 mm Repeat positioning accuracy: ±0.015 mm Hnjdsv Trgqopfx Aagsk Dimensions and Weight: Length: 2750 mm Width: 1350 mm Height: 2320 mm Weight: 4000 kg

Stanje: novo, Pressure: 160 Bending length: 3200 mm Frame gap: 2655 mm Installation height: 400 mm Motor: 11 kW Max. ram stroke: 200 mm Repeat accuracy: 0.015 mm Positioning accuracy: 0.10 mm CNC press brake KK Industries 160x3200, 4 axes Y1-Y2-Y-X-R with CNC crowning Standard equipment: - Robust construction for high stability and precision. - CNC axes: Y1, Y2, X and R axis for precise control and accurate bending operations. - CNC-controlled, motorized crowning system for exact adjustment. - CNC control ZY 68 by the manufacturer (similar to Delem), user-friendly interface and high flexibility. - Backgauge with linear guides and ball screw drive, equipped with 4 stopper fingers for precise material positioning. - 2 sheet support arms for ergonomic material handling. - Laser safety device on the upper beam to ensure operator safety during operation. - Quick-clamping system for the top tool enables rapid and simple tool changes. - Top tool system: Promecam Amada, split and goosenecked for maximum flexibility. Hnedpfx Aaev S Npysgok - Multi-V die system: Both Promecam and Amada systems compatible. - CE safety equipment, complies with all relevant safety regulations. Optional: Delem T53 control (surcharge: €5,000)

Stanje: novo, Bending length: 2600 mm Sheet thickness: 6 mm Top roll diameter: 190 mm Technical specifications: - Rolls hardened and polished - Complete frame made from ST-52 steel - Conical bending device - Digital readout for side rolls - Portable control panel - Rolls mounted on bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically operated Options: - Variable rotation speed: EUR 4,682 - Sheet feed table on request Hnsdpfxsx Twiis Aagsk - Oil cooler: EUR 1,040 - Central support: EUR 8,250 - Side supports: EUR 6,600 We have numerous references!

Stanje: novo, Sheet thickness: 20 mm Bending length: 2600 mm Top roll diameter: 330 mm Technical data: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positioning - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movement of the lower roll is hydraulically operated - Movable control panel - In compliance with CE standards Options: - Variable rotation speed EURO 4,681 - Material feed table EURO 3,400 - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 9,200 - Automatic material extractor - PLC control - CNC control Hodpfx Aaod Ab R Aegenk - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Stanje: novo, Bending length: 1550 mm Sheet thickness: 3.5 mm Upper roll diameter: 110 mm Technical Data: - Rear roll driven by motor - Cone bending device - Entire frame constructed from St 52 steel - Main motor with brake system - Upper and lower rolls driven by electric motor, gearbox, and gear system - Mobile control panel - Cast iron body Hnodpfod Ab N Dox Aagek - Manual movement of rear and lower rolls - Complies with CE standards Options: - Upper roll driven by electric motor EURO 1,166.00 - Digital position display for rear roll EURO 1,010.00 - Hardened rolls EURO 995.00 - Special voltage EURO 480.00 - Material feed table - Lower roll driven by electric motor We have numerous references!

Stanje: novo, Sheet thickness: 8 mm Bending length: 2600 mm Top roll diameter: 210 mm Technical specifications: - Hardened and polished rolls Hodpfx Asd Ab Sfoagenk - Full body made of ST-52 steel - 4 rolls arranged symmetrically - Hydraulically operated cover for easy material removal - Digital display for lower and side roll positions - Hydraulic positioning - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movements of the lower roll powered hydraulically - Movable control panel - In compliance with CE standards Options: - Variable rotation speed: EUR 4,681 - Material feeding table: EUR 3,400 - Oil cooler: EUR 1,040 - Central support: EUR 8,250 - Side supports: EUR 6,600 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Exchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Stanje: novo, Pressure: 200 Bending length: 3200 mm Frame width: 2700 mm Installation height: 400 mm Stroke length (max.): 200 mm Throat depth: 350 mm Dimensions (LxWxH): 3700 x 1700 x 2700 mm Hedpfx Aaetvhxmogonk Weight approx.: 14,000 kg CNC Press Brake 3200 mm x 200 t Standard equipment: ----- Robust construction CNC axes Y1, Y2, X, and R CNC crowning device motorized with CNC control Original DELEM DA 58 T 15" touchscreen CNC control Backgauge with linear guide and ball screw, 4 stop fingers 2 sheet support arms Laser safety device on upper beam Quick clamping system for upper tooling Upper tool system: Promecam Amada segmented and gooseneck Multi-V die system compatible with both Promecam and Amada systems CE-certified safety equipment

Stanje: novo, Bending length: 2050 Sheet thickness: 4.5 Top roller diameter: 140 Technical data: Hsdpfxed Ab Nus Aagonk - Rear roller motor-driven - Conical bending device - Hardened and polished rollers - Entire frame constructed from St 52 steel - Main motor with brake system - Top and bottom rollers powered by electric motor, gearbox and gear system - Portable control panel - Cast iron frame - Manual adjustment of rear and bottom rollers - Compliant with CE standards Options: - Top roller powered by electric motor EURO 1,260 - Digital display for rear roller position EURO 1,010 - Hardened rollers EURO 1,489 - Special voltage EURO 480 - Material feed table - Bottom roller powered by electric motor We have numerous references!

Stanje: novo, Sheet thickness: 50 Hnsdpsd Ab Raofx Aagjk Bending length: 2600 Upper roll diameter: 510 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically driven top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic feed - Upper and lower rolls driven by hydraulics and gearbox - Vertical movements of the lower roll are hydraulically powered - Movable control panel - Conforms to CE standards Options: - Variable rotation speed EURO 5,858 - Material feed table EURO 5,100 - Oil cooler STD. - Central support EURO 18,750 - Side supports EURO 12,750 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Stanje: novo, Sheet thickness: 13 Bending length: 2550 mm Top roll diameter: 270 mm Sheet length: 2550 mm Technical Specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically driven top cover for easy material removal Hnedpfx Aod Ab R Toagek - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gear drive - Vertical movement of the lower roll is hydraulically powered - Movable control panel - CE compliant Options: - Variable rotation speed EUR 4,681 - Material feed table EUR 3,400 - Oil cooler EUR 1,040 - Central support EUR 8,250 - Side supports EUR 6,690 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!