Htt Wtö-Rg 1000-40-1-X-H nakup rabljenega (120.628)

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Heating capacity: 1100 kW, Heat transfer medium: thermal oil, Oil type: Maroltherm LH, Max. supply temperature: 300°C, Permissible operating temperature: 300°C, Permissible operating pressure: 10 bar, Flow rate: 51 m³/h, Max. flue gas temperature: 400°C, Flow monitoring (differential pressure): 0.1 bar – 0.36 bar, Cold start flow rate: 0.1 bar, Fill volume: 1,500 l. Documentation available. On-site inspection is possible. Ljdpfx Ajwtg Hdjdlohg

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 55.800 h, vpenjalna sila: 100 kN, delovna prostornina: 201 cm³, tlak vbrizgavanja: 2.000 letvica, skupna masa: 5.400 kg, premer polžastega transporterja: 40 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto Lhodpfxeylpyvo Adleg

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 55.400 h, vpenjalna sila: 100 kN, delovna prostornina: 201 cm³, tlak vbrizgavanja: 2.000 letvica, skupna masa: 5.400 kg, premer polžastega transporterja: 40 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto Lhsdpfx Adeylpy Asleg

Stanje: novo, Schunk SRH+40-WP /30061820 pnevmatska obračalna enota + 2 x PZN 125-1 / 30043071 univerzalni prijemalci, neuporabljeno, 100 % delujoče, dobava v skladu s fotografijami Ledpfxji Ec Ngj Adlehg

Stanje: rabljeno, Leto izdelave: 1997, Drilling capacity in steel (diameter): 40 mm Arm reach: 1,000 mm Max. workpiece height: 1,250 mm Table size: 1,150 x 690 mm Lhsdpfx Asl Ha Twodleg Spindle taper: MT 4 Spindle speeds: 40 – 1,400 rpm Feed range: 0.08 – 0.40 mm/min Horizontal arm travel: 800 mm Vertical arm travel: 700 mm Spindle stroke: 220 mm Drive power: 3.5 kW Operating voltage: 380 V Total power requirement: 4.0 kW Machine weight approx.: 1.6 t - Serial no.: A01/446/97 - Adjustable cube table, 600 x 500 x 500 mm - Coolant system - Machine lamp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 630005, višina središča: 305 mm, širina na sredini: 1.000 mm, potovalna razdalja osi X: 350 mm, pomik po osi Z: 1.160 mm, model krmilnika: KELCO 90, TECHNICAL DETAILS Centre height: 225 mm / 305 mm Centre distance: 1,000 mm Z-axis travel: 1,160 mm X-axis travel: 350 mm Maximum workpiece weight: 200 kg Workpiece diameter: 449 mm Left grinding wheel diameter: 500 mm Left grinding wheel width: 80 mm Left grinding wheel bore: 203 mm Right grinding wheel diameter: 400 mm Right grinding wheel width: 40 mm Right grinding wheel bore: 127 mm B-axis swivel range: +30° / -190° Maximum grinding wheel speed: 1,720 rpm Peripheral speed: 45 m/s Workpiece spindle speeds from: 5 rpm Workpiece spindle speeds up to: 500 rpm Spindle taper: MT 5 Tailstock quill taper: 4 MT Tailstock quill stroke: 50 mm Feed rate X-axis: 8 m/min Feed rate Z-axis: 16 m/min Maximum table inclination: -1° / +11° MACHINE DETAILS Ledpfoyhnrvjx Adlehg Control system: KELCO 90 Total power requirement: 25 kW Connection: 50 Hz, 3x 380 Volt Dimensions & Weight Machine dimensions (L x W x H): 2,850 x 2,200 x 2,100 mm Control dimensions (L x W x H): 550 x 450 x 900 mm Machine weight: approx. 6,000 kg EQUIPMENT 80 mm riser Coolant system Automatic tool measurement KELSET Wheel dressing device Internal grinding attachment without spindle Set of flanges Set of grinding wheels Balancing arbor Lamp Magnetic chuck diameter (2x): 300 mm / 500 mm Electronic hand control panel

Stanje: dober (rabljeno), Pokrov hidravličnega rezervoarja, pokrov rezervoarja Lodsykz Rkjpfx Adlohg - Pokrov hidravličnega rezervoarja: iz škarij za pločevino Atlantic ATS 3006 .: HMG 400 x 1 H - Dimenzije: Ø 440 x 70 mm - Teža: 14,5 kg

Stanje: dober (rabljeno), številka stroja/vozila: 21494, OFFER 21494 Technical specifications: - Clamping surface approx.: L 900 x W 600 mm - Table height: 480 mm - Peripheral water channel - 3 T-slots M16, length: 900 mm - Lateral mounting plate Lhsdpjhii R Djfx Adlsg - Required floor space: L 1000 x W 760 x H 480 mm - Weight approx.: 300 kg

Stanje: dober (rabljeno), Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 1,000 mm We are offering a used workbench by Jung Heinrich for purchase. The delivery package includes: 02x workbench legs, used Colour: blue Frame profile: 76.2 - 100 mm Leg height: 900 mm Leg depth: 1,000 mm Including cross and diagonal braces, base plates The legs are pre-assembled (bolted lattice construction) 04x workbench beams, used Colour: orange Box profile: 85 x 40 mm Beam type: GN85x41mm Clear span: 2,775 mm 08x locking pins, used Version: fully galvanised Lsdpfx Aohm Stzedlehg 01x chipboard panel, grade II, used Chipboard thickness: 38 - 46 mm Chipboard width: 2,980 mm Chipboard depth: 1,000 mm Surface: possibly coated (possibly two-piece) 01x chipboard panel, grade II, used Chipboard thickness: 38 - 46 mm Chipboard width: 2,755 mm Chipboard depth: 1,000 mm Surface: possibly coated (possibly two-piece) 16x self-drilling screws, new Version: galvanised Dimensions: 6.3 x 70 mm The images serve as a visualisation of the material. Material colour may vary. The chipboard panels may be supplied either coated or uncoated. - Workbenches are supplied flat-packed; - Workbench legs are pre-assembled; - The usual production time is approx. 3 - 5 working days.

Stanje: rabljeno, Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines - Forklift tines: 2 pieces / 1 pair - Length: 1000 mm Lhodpfxegnzxus Adlsg - Cross-section: 120 x 40 mm - Mounting: 500 mm (see diagram in the photos) - Transport dimensions: 1155 / 700 / H120 mm - Weight: 132 kg

Stanje: rabljeno, We offer used grating panels here. TECHNICAL DATA Dimensions: 1,400 x 1,000 x 40 mm Mesh size: 35 x 35 mm Surface: galvanized Condition: used PRICE €210.00 net per unit (10 pieces) €249.00 gross incl. VAT Available quantity: 10 pieces YOUR CONTACT PARTNERS: Lhsdpfey H E I Tsx Adlsg Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipping is available at an additional charge. The extra costs depend on the place of delivery and shipment size and can be requested individually from us. PROJECT PLANNING Our sales team will gladly provide you with a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The price is per unit/net price or as stated in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, deals in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry, and crafts. We continuously offer attractive used items from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. Four wins – The DLK success factors – Warehouse Technology | Levelmaker® | Logistics | Solutions

Stanje: dober (rabljeno), Technical data for pallet rack beam: Shelving system: Jung Heinrich Type: Esmena Lhsdpfx Aetp Tb Tjdleg Scope of delivery includes: 01x Pallet rack beam, used Material color: yellow Box profile: 115 x 40 mm Connector: 4 hooks Clear length: 1,100 mm 02x Safety pins, used Design: completely galvanized For securing the crossbeams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. If transport or shipping of this item is required, additional costs will apply, which can be requested separately depending on delivery location and scope of delivery.

Stanje: zelo dobro (rabljeno), The scope of delivery includes: 02x Workbench stands, used Material finish: sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted framework) 04x Workbench beams, used Material finish: RAL 7035 light grey Box profile: 80 x 40 mm Beam type: TRV1-240-084-30CE Clear span: 2,400 mm 08x Safety pins, new Design: fully galvanized 01x Particle board, second choice, used Particle board thickness: 38 mm Particle board width: 2,580 mm Particle board depth: 1,000 mm Surface: possibly coated (possibly in two parts) 01x Particle board, second choice, used Particle board thickness: 38 mm Particle board width: 2,380 mm Particle board depth: 1,000 mm Surface: possibly coated (possibly in two parts) 16x Self-drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The photos are for illustrative purposes only. Actual material color may vary. The particle boards may be coated or uncoated. - The workbenches are picked/shipped unassembled; - The workbench stands are pre-assembled; Lodpfx Adoi Ewqyolehg - Standard production time is approx. 5 working days.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2009, 🔥 FOR SALE: 2x Fröling Turbomat 500 kW Cascade System – Total Output 1000 kW 🔥 ✔ 2x Fröling Turbomat 500 kW ✔ Total output: 1000 kW ✔ Fully automatic wood chip heating system ✔ Lambda control + negative pressure control ✔ Moving feeder grate ✔ Automatic cleaning and ash removal ✔ 4-pass heat exchanger with automatic WOS cleaning system ✔ Integrated multi-cyclone dust separator ✔ Water-cooled feed channel ✔ Heavy-duty industrial construction Suitable for: - Wood chips - Pellets - Sawdust - Biomass fuels 📦 Included in the price: - 2x boilers - 2x feed augers - 2x pumps - 2x return flow mixers - 2x control cabinets / control units - Return flow elevation up to shut-off - Ash discharge augers ❌ Not included: - Walking floor discharge - Ash containers 🔧 Dismantling: - 16.06 – 17.06.2026 - Dismantling included in the price - Loading by crane directly through the roof opening 🚛 Loading: - 18.06.2026 - Crane firmly booked from 07:00 to 10:00 - Transport and truck organization to be handled by the buyer ⚠ The buyer’s truck must be on site before crane operations begin. Any additional crane hours due to late truck arrival must be paid for directly onsite by the buyer. Márton Pauker Top Heating Systems Lhjdey Rfa Ropfx Adlsg BEN & JAK KFT 📞 🌐

Leto izdelave: 1997, stanje: generalkompletno obnovljen (rabljeno), skupna masa: 300 kg, skupna dolžina: 1.270 mm, skupna širina: 550 mm, skupna višina: 570 mm, 4 units of spiral volute pump in process design 1 unit has been completely overhauled, with new ball bearings for both pump and motor. Mechanical seal refurbished by a specialist company. All seals renewed. Flow rate: 6 m³/h Head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling contact bearings Impeller side: 1x NU411 Drive side: 2x 7311 Drive side lubrication: Oil Lubricant monitoring: Oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Quenched and tempered steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: Cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction nozzle nominal diameter: DN 80 Discharge nozzle nominal diameter: DN 40 Nominal pressure, suction: PN 10 Nominal pressure, discharge: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Base plate: Cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Rated motor power: P2 7.50 kW Thermal class: F Motor protection: IP55 Power factor cos phi: 0.82 Dimensions: Length: 1270 mm Lhjdpfjiuznuex Adleg Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulphurization plants - Acidic, chloride-containing wash slurries - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine engineering

Stanje: rabljeno, Leto izdelave: 2002, Opportunity to acquire a DEMAG injection moulding machine with 1000T clamping force and 140,000 operating hours. Can be inspected in operation by appointment. Availability: 06/2026 Important: The information on this page has been obtained to the best of our knowledge and belief. This information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, this information is non-binding and does not constitute any contractual term. We recommend verifying all essential details during an inspection of the machine. To save unnecessary travel expenses for our clients, we usually recommend arranging a live video inspection. Clamping force: 1000 tons Opening stroke: 1250 mm Min. mould height: 500 mm Max. mould height: 1200 mm Tie bar distance: 1400 × 1120 mm Platen size: 1950 × 1670 mm Screw diameter: 80–110 mm Ljdpeyq Dqgjfx Adlshg Injection volume: ± 2000–3800 cm³ Shot weight (PS): ± 1800–3400 g Injection pressure: up to ≈2380 bar Total weight: 72.5 tons (72,500 kg) Overall length: 13,184 mm Overall width: 3,175 mm Overall height: 2,925 mm Max. pressure ({$P_{max}$}): 190 bar Max. flow rate ({$Q_{max}$}): 486 l/min System current: 409 A Heating current: 154 A

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 144.000 km, moč: 375 kW (509,86 KM), prva registracija: 04/2018, vrsta goriva: dizel, konfiguracija osi: 8x4, gorivo: dizel, zavore: zaviranje z motorjem, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 6.400 mm, Leto izdelave: 2018, Oprema: električno upravljanje oken, navigacijski sistem, spojka prikolice, = Dodatne možnosti in oprema = - Aluminij rezervoar za gorivo - Ojačevalec zavorne sile - Tih - Omejevalnik hitrosti - Zračno vzmetenje - Kamera za vzvratno vožnjo - Sončna zaslonka - Orodjarna - Ksenonska razsvetljava - Priklop za kardansko gred (PTO) - Centralno mazanje - Vlečna kljuka = Dodatne informacije = Konfiguracija osi Sprednja os 1: Krmiljena Zadnja os 1: Dvižna os; Krmiljena Teže Lastna teža: 21.215 kg Nosilnost: 15.785 kg Skupna dovoljena masa: 37.000 kg Funkcionalnost Znamka nadgradnje: HMF 5020-K6 + FJ 1000-K5 CE označba: da Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Finančne informacije Ledpsyx E U Defx Adljhg Cena: Po dogovoru

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 1.650 mm, premer brušenja: 400 mm, We offer a new BUB40 x 1500 NC machine equipped with MITSHUBISHI NC control. The machine is still under a leasing contract with ING Lease. The unit has been thoroughly refurbished by FAS GŁOWNO based on a TOS HOSTIVAR BUB 40 machine platform. Technical Specifications • Maximum workpiece diameter: 400 mm • Maximum workpiece length: 1,500 mm • Centre height: 200 mm • Distance between centres: 1,500 mm Lhodpfswzkywjx Adlsg • Minimum ground workpiece diameter with 380 mm grinding wheel: 20 mm • Tailstock quill stroke: 40 mm • Maximum clamping force of tailstock: 4,000 N • Spindle centre taper: ISO 296-1991/Morse 5 • Tailstock centre taper: ISO 296-1991/Morse 5 • Maximum workpiece weight between centres: 500 kg • Maximum workpiece weight in the chuck (including chuck): 100 kg • Machine width (with enclosure): 6,650 mm • Machine depth (with enclosure, without control panel): 2,400 mm • Machine height (with enclosure): 1,850 mm • Machine weight: 7,000 kg • Total power requirement: 38 kVA Grinding Wheel Spindle • Standard grinding wheel dimensions: 500 x 80 x 203.2 mm • Grinding wheel drive motor power: 11 kW • Rated grinding spindle speed: (for 430 mm wheel / for >430 mm up to 500 mm wheel) 2,000 / 1,744 rpm • Grinding spindle slide servomotor power: 2 kW • Grinding spindle slide servomotor torque: 9.5 Nm • Maximum continuous X-axis feed rate: 2 m/min • Minimum X-axis feed increment: 0.001 mm • Maximum continuous X-axis feed rate: 6 m/min • Minimum X-axis feed increment: 0.001 mm • Maximum grinding wheel increment in INC mode: 0.1 mm • Table feed servomotor power: 3.5 kW • Table feed servomotor torque: 16.7 Nm Workpiece Spindle • Workpiece spindle speed range: 1 - 150 rpm • Workpiece headstock servomotor power: 3.5 kW • Workpiece headstock servomotor torque: 16.7 Nm For more information, please contact us by email or phone.

Stanje: skoraj kot novo (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x Stackable Box, Grade II Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Finish: RAL 5002, ultramarine blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Additional data / information: Hole pattern: 117 Lhjdshm Slljpfx Adljg Bottom + all four side walls with offset round perforations Round hole Ø: approx. 12 mm Spacing: approx. 14 mm center to center - With hand grip openings on both end faces - With beaded rim Please note: These are Grade II stackable boxes. Scratches, soiling or color defects may be present. General information about the item: This item is only available for collection. If transport or shipping is required, additional costs will apply, which can be provided separately depending on the delivery location and scope. Our service overview: (Prices on request) Installation, Assembly Our general installation conditions apply Racking inspection Racking inspection according to DIN EN 15635, performed according to the requirements of BGR 234 – visual inspection for all racking systems Delivery with our own fleet (without unloading)

Stanje: dober (rabljeno), Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 1,000 mm We are offering a used workbench frame from the manufacturer Vogelsang for sale. Technical data for the workbench frame: Ledpfxehm Sr Se Adlshg Manufacturer: Vogelsang Type: NS Scope of delivery: 02x workbench supports, new Material finish: sendzimir galvanized Support height: 900 mm Support depth: 1,000 mm Incl. cross and diagonal bracing, base plates The supports are pre-assembled (bolted truss structure) 04x workbench beams, used Material finish: orange Box profile: 110 x 50 mm Clear span: 2,700 mm 08x locking pins, used Design: fully galvanized The pictures are for material illustration purposes only. The material colour may differ in some cases. - The workbenches are picked/shipped unassembled; - The workbench supports are pre-assembled; - Production lead time is usually approx. 3 - 5 working days.

Stanje: pripravljen za uporabo (rabljen), Parvex LC310THR0004 servomotor SN: 8340 z dajalnikom Heidenhain ROD 426 1000 02S12-03 ID: 376 846-79, serijska številka dajalnika: 16078305, rabljen, dobro ohranjen, 100 % delujoč, obseg dobave kot na slikah. Ledpjxtwa Esfx Adlehg

Stanje: novo, Lead and feed screw lathe Manufacturer: ROMI Model: T240 x 1000 Condition: New machine Centre height: 220 mm Centre distance: 1,000 mm Standard equipment includes: - 3-axis digital readout FAGOR Innova 30i-T - Coolant system Lhjdpfx Aob Suakedljg - Bed stop for automatic shut-off - Quick-change toolpost base, size B - Operating manual

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 1.093 h, številka stroja/vozila: Z62M-1271, vrsta goriva: dizel, Lastna teža: 10.350 kg Dvižni steber: zgloben krak Dvižna kapaciteta: 227 kg Delovna višina: 2.090 cm Lodpfx Adjwyaaqjljhg Stanje sprednjih pnevmatik: 70 Stanje zadnjih pnevmatik: 70 Maks. horizontalni doseg: 1.250 m Transportne dimenzije (D x Š x V): 9,25 x 2,49 x 2,54 Za več informacij se obrnite na skupino PFEIFER.

Stanje: rabljeno, Leto izdelave: 2020, obratovalne ure: 789 h, številka stroja/vozila: Z62M-1312, vrsta goriva: dizel, Lastna teža: 10.350 kg Dvižni steber: zgloben krak Dvižna kapaciteta: 227 kg Delovna višina: 2.090 cm Stanje sprednjih pnevmatik: 70 Lsdpfewyaa Djx Adlehg Stanje zadnjih pnevmatik: 70 Maks. horizontalni doseg: 1.250 m Transportne dimenzije (D x Š x V): 9,25 x 2,49 x 2,54 Za več informacij se obrnite na skupino PFEIFER.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, 1 used steam boiler ----- - mounted on frame - Manufacturer: LOOS, Gunzenhausen Model: U-HD 800 Heating surface approx.: 14 sqm Previously operated at: 640 kg/h Permissible operating pressure: 13 bar Lhodpfxswwt D Do Adlsg Increased test pressure: 24.05 bar Water capacity at NW approx.: 748 l Total water capacity approx.: 1,108 l Year of construction: 2005 CE mark: CE 0036 Equipped with Weishaupt combination burner for gas & oil, model GL3/1-E, ZMD, gas control unit, control cabinet, feedwater pump, and the existing coarse and fine valves.