Homag Stroj Za Oblaganje Robov nakup rabljenega (87.020)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2016, Funkcionalnost: nepreverjeno, največja debelina roba: 22 mm, največja hitrost vrtenja: 12.000 obr/min, Oprema: CE označba, The machine has the following configuration: Pre-milling unit automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge Edge magazine glue pot for EVA hot-melt adhesive pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and Bottom Trimming Unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine Trimming and Corner Rounding Unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner Rounding Aggregate AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Cut-off Saw RB02 Positioning via NC Glue Scraper RCC-701 Polishing Unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying Unit LPT-700 TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber band Hjdoyxndbjpfx Aguenk Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7673

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, delovna višina: 60 mm, TEHNIČNI PODATKI Največja višina plošče: 60 mm Višina PVC-/ABS-roba: 3 mm PODROBNOSTI STROJA Power-Touch upravljanje: 21" Full-HD zaslon OPREMA Proti-lepilna enota Dvomožnostni oblikovalni rezkalni agregat Nosilna plošča za role EVA lepilna enota s predtalilno enoto in lepilno kadjo Agregat za pritisk robov za ravne profile s pritisnimi valji Krožna žagalna enota z avtomatskim zasučnim nastavljanjem Hnodpfx Agjyzm R Sousk Dvomožnostni posnemovalni agregat z nastavitvijo 2-motorna multifunkcijska zaoblitvena enota (posnetki + zaoblitve) Delovna višina elektronsko nastavljiva preko N.C. Vodilo za obdelovanec z prostotečnimi valji Bočna valjčna steza s prostotečnimi kolesi Agregat za vleko robov Agregat za vleko lepila Krtačni agregat Zunanja referenca: MMG013

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: 0-261-20-5976, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 20 m/min, model krmilnika: POWER CONTROL PC 20+, TEHNIČNI PODATKI Višina panela: 60 mm Debelina robu PVC-ABS: 3 mm Debelina robu iz masivnega lesa: 12 mm Dovodna hitrost: 20 m/min PODROBNOSTI STROJA Krmiljenje: POWER CONTROL PC 20+ Obratovalni tok pri polni obremenitvi: max. 33 A Največji motor: 9,7 A Največje gretje: 2,7 A Varovalka: 35 A Frekvenca: 50 Hz OPREMA Zgornji motorizirani gumirani pas Ročno vodilo za dovod Skupina proti sprijemanju Pravilna skupina Lepljenje z EVA-lepilom Držalo za robove Skupina za končno obrezovanje z avtomatsko nastavitvijo nagiba Izmenična obrezovalna in kotnikova skupina z dvema motorjema Linearno zaoblitvena enota z 2 motorjema Enota za strganje roba Enota za strganje lepila Krtačna enota Hnodoyzm E Nspfx Agujk Zunanja referenca: MMG014

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, skupna višina: 2.200 mm, skupna dolžina: 7.500 mm, skupna širina: 1.500 mm, skupna masa: 4.000 kg, TEHNIČNI PODATKI Skupna višina: 2.200 mm Skupna dolžina: 7.500 mm Skupna širina: 1.500 mm Hsdpfx Agsy Akytjuonk PODROBNOSTI STROJA Teža: 4.000 kg Leto izdelave: 2007 Napetost: 400 V Poraba toka: 46 A Varovalka: 63 A Transportne dimenzije: 7.500 mm x 1.500 mm x 2.200 mm (d x š x v) Transportna teža: 4.000 kg OPREMA Orodja na voljo: Da (za 1., 3., 4., 5., 7., 8. enoto) Orodja na voljo: Ne (za 6. enoto)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: 5/1-107, Funkcionalnost: popolnoma funkcionalen, skupna višina: 1.730 mm, skupna dolžina: 6.100 mm, skupna širina: 1.440 mm, Oprema: CE označba, Stroj ima naslednjo konfiguracijo: 1. Predrezalna enota (orodja priložena) 2. Lepljiva enota 3. Pritiskalni valji (orodja priložena) 4. Obočna enota (orodja priložena) 5. Ni specificirano (orodja priložena) 6. Kotno zaoblitvena enota (orodja priložena) 7. Radialna vlečna enota (orodja priložena) 8. Ni specificirano (orodja priložena) 9. Ploska vlečna enota (orodja priložena) PODROBNOSTI STROJA Število enot: 9 kos Napetost: 400 V Poraba toka: 21,9 A Varovalka: 50 A Dimenzije Dimenzije (D x Š x V): 6.100 x 1.440 x 1.730 mm Transportni paket: 1 kos Hedpfxey Akgto Aguenk OPREMA CE označba

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, hitrost pomika os X: 30 m/min, model krmilnika: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cross-cut unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Unit: Corner rounding unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Unit: Profile scraping unit Manufacturer model: SKF-L Number of motors: 4 Max. processing speed: 20 m/min Motor power: 0.180 kW Speed: 12,000 rpm Unit: Edge scraper Manufacturer model: 08.519 Unit: Glue scraper Manufacturer model: 08.521 Unit: Brushes Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Hjdpfx Aeyzy Iwegujnk Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control system: ICOS OPEN EQUIPMENT Magazine for roll material Hot melt glue tank Edge pressure roller unit Pressure with rubber-coated belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6089

Stanje: rabljeno, Lange B90 KFE Debelina roba 0,4 - 3 / 5 mm Hjdpfx Agoy Ddnaoujnk Upravljalna enota: PLC-zaslonski panel na dotik Predrezalna enota za pripravo pred lepilnim delom Samodejni zalogovnik robnega materiala za rolo materiale S teflonom prevlečen hitro zamenljiv lepilni lonec za talilno lepilo v granulatu Višina obdelovanca 8 - 50 mm Natančno nastavljiv lepilni valj Škarje do 3 mm za predrezanje rolo materiala Pritiskalna enota Kapovska enota Večnamenska rezkalna enota za poravnavo, radij in posnemanje robov Enota za kopiranje kotov za končne robove do 2 mm, dodajanje iz upravljalne enote Radijska strgala Ploščinska strgala Polirna enota Sprejna naprava na vhodu in izhodu Letnik 2018 Stroj je FUNKCIONALEN v DOBREM STANJU Na lokaciji

Stanje: rabljeno, OTT Tornado - TOP Upravljanje - preko 15-palčnega barvnega zaslona na dotik za popolno avtomatizacijo in najvišje udobje upravljanja CM-CombiMelt lepilni sistem, primeren za obdelavo EVA in PUR talilnih lepil ter vseh običajnih čistilnih granul Enota za spajanje za dodajanje ivernih plošč Samodejni ročni magazin Samodejni magazin za robove Dvojni odrezovalni stroj z avtomatskim vrtenjem 0° / 3° Poravnalni rezkalnik za poravnave – 12 mm Fina rezkalna enota RADIUS – rezkanje radijev – profilna rezila R2 – R5 Avtomatizirano kopirno rezkanje – zaobljenje vogalov Strgalo za robove – radij – posnetje Strgalo za površine Mazalna pršilna naprava – PU Čistilni set s finim polirnim strojem Zelo stabilna podpora za obdelovance z valjčnimi tirnicami – SPREDAJ z izvlekom na škarje Kompletna oprema z orodji vključena Stroj je v IZJEMNO DOBREM STANJU Stroj iz rokodelske delavnice Hedpfx Asyym Dcjgujnk Na zalogi v Liebochu

Stanje: rabljeno, Holz Her Auriga 1308 FÜ + PU Hodpfxeyyl U He Agujnk Compact design – edge thickness 0.4–6 mm SPS screen control Edge-Control PPC 221, colour display Pre-milling unit for jointing before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU-JET for EVA and PUR adhesives, cartridge or granulate + PU Glue application via nozzle technology Workpiece height 6–65 mm Automatic glue height adjustment Pressing section 1912-3, pneumatic End trimming unit 1918, pneumatic, for coil and strip material up to 8 mm edge thickness With pneumatic adjustment 0–10° tilt for end trimming saws Milling unit 1827 MOT 4, flush trimming 8 mm, radius trimming – chamfer trimming – 15° 1827 MOT NC axes controllable via control panel Corner rounding unit 1832 SPS for rounding corners up to 3 mm edge thickness in throughfeed Scraper unit for chamfers and radii, with 2 MOT scraper holders Flat scraper unit – finish Spray device – PU Complete DIA tooling included Low operating hours / from a craft business Machine is WORKSHOP-OVERHAULED and in TOP CONDITION Available ex-stock Lieboch

Stanje: dober (rabljeno), Leto izdelave: 2012, skupna masa: 3.000 kg, leto zadnje generalne obnove: 2025, Oprema: CE označba, - HOMAG KAL211 EDITION 2264 Leto izdelave: 2012 PREGLED AGREGATNE OPREME: - Krmiljenje power Control PC22 - Zgornji pritisk povezovalnega klinastega jermena - Pomik 18 - 25 m/min - Debelina obdelovanca 60 mm namesto 40 mm - Skupna dolžina 7845 mm - Elektronska višina FPR/L260+EDITION+FSQ - Hitro-vpenjalni sistem za nanosno enoto QA/PU - Enota za razprševanje ločevalnega sredstva zgoraj/spodaj - Lepljenje rezkalna enota - Lepljenje del A20 z Quickmelt nanosno enoto - Ročni magazin 2 roli - Priprava za Lasertec aktivacijsko enoto - Obočni agregat HL84 poševno/ravno - Avtomatizacijski paket faza/polmer AMB/EDITION2264/74 - Predrezkalna enota BF10 1,5 kW Hodpfx Agsyz Dbbsusnk - Oblikovna rezkalna enota FK11 ročna - Profilni strgalnik PN10 - Finish agregat - Strgalnik za lepilne fuge - Polirni agregat - Sušilna komora z dušikom

Stanje: dober (rabljeno), Koda: 0358 Znamka: FRAVOL Model: VSB - CE standard Robilnik za oblaganje ravnih, okroglih ali ukrivljenih plošč s robom iz furnirja, melamina, PVC, ABS do debeline 3 mm - CE standard Tehnični podatki: Nov patentiran delovni pult na najlonskih vložkih, ki zagotavlja lažje drsenje plošče in popolno celovitost ter čistočo obdelane površine plošče Dimenzije delovne površine mm 910 x 860 Višina delovne površine mm 910 Višina plošče mm 10/40 Debelina robu 0,4 - 3 mm Min. notranji radij 20 mm Delovni tlak 6 bar Vgrajena moč Kw 2,35 Nosilna palica s kroglami Stisnjen zrak 6 bar Skupne dimenzije: mm 900 x 900 x 1100 v Teža kg 240 Hodpfx Agsy Dggrjuenk

Stanje: rabljeno, Leto izdelave: 2001, Debelina obdelovanca min./maks.: 6/45 mm Debelina nalimka: 0,4 - 3 mm Največja višina nalimka: 51 mm Najmanjša dolžina trakovega nalimka: 350 mm Največji previs nalimka v višino na stran: 3 mm Najmanjša širina obdelovanca: 60 mm Najmanjša dolžina obdelovanca: 180 mm Skupna dolžina: 3700 mm Širina: 1440 mm Največja višina: 1970 mm Višina vstopa obdelovanca: 850 mm Teža: ca. 850 kg Hnedpfxjy Dd Iyj Aguok Skladiščno mesto: pri dobavitelju

Stanje: rabljeno, OTT Tornado FÜ + PU SPS-Comp. krmiljenje, 7" TFT barvni zaslon na dotik CM-CombiMelt za EVA in PUR talilna lepila Enota za predrezkanje - spajanje Popolnoma avtomatski valjčni magazin Popolnoma avtomatski magazin za robove Pnevmatsko poravnavanje 0-3° Poravnalno rezkanje - 12 mm Radialno rezkanje R-2, R-5 Posnemanje robov 0°/15°/30°/45° Zaobljanje vogalov Radialni strgalnik Površinski strgalnik Zvočno izolirana kabina z odsesavanjem Čistilni komplet s štirikratno pršilno napravo, finim polirnim strojem in pršilno napravo za mazivo Prva dostava 2006 Stroj je DELOVNO PREVERJEN, v VRHUNSKEM STANJU Hsdpfxeywuvns Aguonk Na zalogi v Lieboch

Stanje: novo, Edge thickness: from 0.4 - 3 mm Workpiece thickness: from 9 - 60 mm Feed speed, stepless: 8 - 12 m/min Total connected load: 15 kW Dimensions (LxWxH): 4,290 x 840 x 1,690 mm Masterwood Edge Banding Machine ME 309 "Partnership Edition" ----- The Masterwood edge banding machine type ME-309 is a pneumatically controlled machine, equipped with all units required for a perfect finish. It is also suitable for processing PUR adhesives. Hnedpey Ay Akefx Agujk Units: - Jointing cutter unit - Saw trimming unit - Universal milling unit - Corner rounding unit - Flat scraper - Radius scraper - Buffing unit Equipment features: - Separator agent spraying system - Pre-heating lamp - Gluepot with pre-melting unit - End trimming unit - Cleaning spray device Technical data: Machine size: 4,290 x 840 x 1,690 mm (LxWxH) Feed speed: stepless from 8 to 12 m/min Min. panel size: 90 x 120 mm (with panel thickness 9-30 mm) Min. panel size: 90 x 200 mm (with panel thickness 30-60 mm) Min./max. panel thickness: 9 - 60 mm Min./max. edge thickness: 0.4 - 3 mm Total connected load: 15 kW ----- Price for the above-mentioned machine upon request! Plus packing and shipping costs ----- Freight costs for ME-309 - EUR 2,950.00 Complete, incl. delivery and installation Including intensive training of operating personnel. Unloading and cross-transport to installation site to be arranged by the customer. ----- (Technical information as provided by the manufacturer - subject to change and without guarantee) All prices quoted are net, plus VAT as applicable.

Stanje: rabljeno, Leto izdelave: 2018, Edgebanding Machine AKV 3006 DK - F with Jointing Milling Unit including DIA Tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combi-milling station for radius R 2.5 mm. Technical Description: - Hotmelt adhesive application to workpiece for edge materials up to 3 mm - Maximum workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combi version) and fine adjustment accessible from operator side - Spare slots for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment for trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged operator panel - Double roller upper pressure beam - Aggregate viewing window from both rear and operator side of the machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Special Equipment: Airtronic incl. cooling and antistatic spray unit (2014) 1 pc. hot air unit for achieving optical zero joint with special edging materials - Including pneumatic glue pot positioning - Including cooling and antistatic spray unit - Including 2 additional quick-change edge channels - Including special corner rounding milling unit (max. workpiece thickness: 60 mm, min. length: 200 mm) - Exclusively for Hebrock edgebanders of the 3000 series - Retrofitting possible (extra cost on request) Technical Data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation after approx. 2 min Upgrade for 8 mm edge thickness 1 pc. for max. 40 mm workpiece thickness Including pneumatic saw adjustment (special design) Minimum workpiece thickness: 8 mm 3-point pneumatic milling cutter adjustment Switching radius – chamfer – flush for combi milling stations, eliminating manual adjustment at the combi milling station for the 3rd reference point. PLC control mandatory. Buffing station (polishing) 1 pc. corner rounding milling unit incl. combi tool and pneumatic adjustment for chamfer/radius (max. workpiece thickness 40 mm, min. length 300 mm, radius R 2.0 mm) Radius scraper 1 pc. incl. pneumatic lifting device (radius R 2.0 mm) Flat scraper 1 pc. with pneumatic activation Full chassis 1 pc. Glue station change system incl. glue drain device prepared for discharge below (1 pc), without second glue pot; includes possibility to work with PU adhesive Grooving saw unit vertical into panel 1 pc. incl. pneumatic lifting device - Groove width: 8.2 mm - Groove depth: 8.0 mm - Distance from panel edge: 14.0 mm Special grooving saw motor with higher power 1 pc. Hnjdpfxex S Hmzj Agujk Extraction for jointing unit, internal, on the extraction manifold of the machine Ball bearing for corner rounding cutter 24.1mm 1 pc Ball bearing for corner rounding cutter 24.2mm 1 pc Protective agent spray system 1 pc. for edge surface – for sensitive edge materials Combined spray system for panels: separating and cleaning agent spray (1 pc) Storage location: Supplier

Stanje: rabljeno, Holz Her STREAMER 1057 XL FÜ + PU Debelina robnega traku 0,4 - 6 mm Moderna upravljalna enota s preklopnim stikalom za nastavitev agregatov Popolnoma avtomatski magazin za robni trak v roli ali v traku Lepilna postaja GLU-JET za kartuše + PU lepljenje Nanos lepila s tehnologijo šob Tipalna šoba Višina obdelovanca 6 - 60 mm avtomatska nastavitev višine lepilnega nanosa Visokokakovostna 3-valjna pritisna enota, 1 valj motoriziran Odkapni agregat pnevmatski za rolo in trak do 6 mm debeline S pnevmatskim nastavljanjem naklona žage od 0° do 10° Rezkalni agregat, poravnalno rezkanje 6 mm, radijsko rezkanje - posnemanje robov - 15° Agregat za kopiranje vogalov – do 3 mm debeline robnega traku Rezkalni agregat s strgalnimi noži za posnemanje in radije z 2 nosilcema strgala Agregat za površinske strgala – finiš Polirni agregat Hjdpfjywh Epsx Agujnk Razpršilna enota na vstopu in izstopu ter za PU Stroj z vsemi obdelovalnimi orodji Stroj je DELAVNIŠKO PREVERJEN Prva dostava 2016 Iz zaloge Lieboch

Stanje: rabljeno, Holz Her UNO 1303 + PU Debelina robnega traku 0,4 - 3 mm (6 mm) Upravljalna plošča s preklopnimi stikali za nastavitev agregatov Popolnoma avtomatski robni magazin za rolo in trak Lepilna postaja: kartuše + PU lepljenje Višina obdelovanca 6-55 mm Pritisk pnevmatski Rezkalna enota za rolo in trak do 3 mm (6 mm) debeline Hnjdpfx Agsywh A Isujk Nastavitev od 0-10° nagiba žage za rezanje Rezkalna enota za poravnavo, radije, posnetje - 15° Enota za vlečne rezila za posnetje in radije Enota za površinsko vlečno rezilo - končna obdelava Stroj je PREVERJEN, V VRHUNSKEM STANJU iz zelo vzdrževanega obrtniškega podjetja Na zalogi v Liebochu

Stanje: rabljeno, Leto izdelave: 2004, skupna višina: 2.100 mm, skupna dolžina: 7.400 mm, skupna širina: 1.100 mm, skupna masa: 3.200 kg, Oprema: CE označba, No. 3267 Edge Banding Machine Brandt KDF 680 Hodpoy Df N Sefx Agujnk Used, Year of manufacture: 2004 Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 – 12 mm Control: Brandt Power Control PC 16 Jointing milling unit Quickmelt gluing unit Combination milling unit for flush trimming, chamfering, and radius trimming End trimming unit: automatically adjustable via program from chamfer cut to straight cut Corner rounding unit (front edge) Profile scraper unit / corner rounding scraper unit Flat scraper unit Buffing unit for edge polishing Release agent spraying device Special equipment: Schugoma HDL3020 Hot-Air System (retrofitted) Hot air process suitable for processing laser edges (co-extruded edges) to achieve an optical zero joint Transport dimensions approx. 7400 x 1100 x 2100 mm (LxWxH) Weight approx. 3200 kg Sale on behalf of a client, ex location near 71063 Sindelfingen, without dismantling, transport, or installation Dismantling, loading, and transport available from us as an option. Description and price subject to change and error To avoid possible misunderstandings, an on-site inspection is possible and recommended by prior appointment. Sale as-is Technical specifications, description of condition, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; the following applies: “sold as seen” Images and videos are for reference only and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before collection or shipping Delivery conditions: ex location

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Ključne značilnosti: Model: K 800R Kapaciteta: 1 enota, neto teža 2.472 kg Namen: lepljenje robov in obdelava lesenih ter plastičnih komponent za pohištveno industrijo Standardi: skladen z evropskimi varnostnimi predpisi (CE certifikat) Hnjdsyxcbhopfx Agusk Oprema in dodatki: AVTOMATSKI ENOSTRANSKI ROBNI LEPILNI STROJ Evropski varnostni predpisi (CE norme) Sestava Olimpic K 800 "T-ERL" (47) Napetost 400 V EU Frekvenca 50 Hz "AUTOSET" za sestave ER2, T-ERS in T-ERL Elektronsko upravljanje "StarTouch" namesto "Touch 7" Distančnik panelov na dovodni ograji Elektronsko pozicioniranje zgornjega pritisnega mehanizma Horizontalni pomik enote za čelno rezanje "K-SEL" Strgalna enota robov RAS/S 2P Protizlepilna enota "AAR" Naprava "EASY SIZE" Senzor za zaznavanje robov Komplet "IGLUE" za lepilno enoto Lepilni kotel "SGP" z ročnim doziranjem namesto standardnega Pnevmatski komplet z 2 pozicijama za obrezovalno enoto RI/800 Pnevmatski komplet s 3 pozicijami za obrezovalno enoto RI/800 Razpršilna naprava (meglica) za občutljive robove Strgalna enota za lepilo "RCA/2C" Krtačna enota "SPN" Strgalna enota robov z radijem = 1 mm Strgalna enota robov z radijem = 2 mm Leseni bloki

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Edge Bander / Edge Banding Machine Manufacturer: EBM Model: KDP 112 SLK Year of Manufacture: 2000 Edge bonding using hot-melt glue pot For plastic edges and veneers: 0.4 to 1 mm For PVC edges and thick veneers: 1.0 to 3.0 mm Solid wood edging up to 5 mm Flush trimming saw with cross-cutting unit Top and bottom flush trimming Approx. dimensions: 2.86 x 1.32 x 1.3 m Approx. weight: 550 kg Total power requirement: approx. 10 kW Condition as shown in photos. Please also refer to the item description. Parts can be collected by arrangement. All dimensions are approximate. All information provided to the best of our knowledge, but without guarantee. Subject to prior sale. The items can be collected by the buyer or shipped at the buyer’s expense. Shipping costs are indicative and may vary depending on distance. The item is offered under differential taxation. The stated sale price is the gross final amount. No invoice showing VAT will be issued. You will receive an invoice according to §25 UStG. Warranty terms: Due to wear and tear on used parts, items are generally sold as defective – for spare parts use only, and only to commercial buyers. By submitting a bid, the buyer accepts this as the basis of the purchase contract. Hsdpfx Aoy Ahubegujnk If the item is used, a 12-month warranty applies if the buyer is a consumer (§13 BGB). If the buyer is a business (§14 BGB), all warranties are excluded. If the item is new, a 24-month warranty applies for consumers (§13 BGB). For businesses (§14 BGB), the warranty period is 12 months.

Stanje: delavnici obnovljeno (rabljeno), Debelina nalimka: trakovi do 8 mm, role do 3 mm Lepljenje robov Doziranje lepila (sistem s kartušami, lepilo-nastavek) Pritiskalna enota Postaja za kapanje Postaja za rezkanje Vlečna strgala Kopiranje vogalov Ploščinsko vlečno strgalo Hjdpfxjy Diwme Agusnk Skupna dolžina ca. 5350 mm (vklj. založnim krožnikom) Prenova: Vstopno ravnilo na motorni pogon Ogrevanje popolnoma prenovljeno, nov grelni element s prevleko Predelava ogrevanja – samodejno doziranje Predelava na tipalno šobo Rezkanje: predelava na motorično nastavitev Novi noži Točna oprema na zahtevo Podatki izhajajo iz podatkovnega lista, brez garancije

Stanje: rabljeno, Leto izdelave: 1989, Machine d'occasion Petite machine pour l'usinage de pièces formées Traite des matériaux de chant revêtus d'une colle thermofusible, qui est réactivée à l'aide d'air chaud L'avance de la pièce est automatique par pression contre le rouleau presseur central motorisé, assurant ainsi une réactivation régulière de la colle et une fiabilité de collage Régulation de température thermostatique avec thermostat à aiguille Soufflante à air chaud triphasée, sans entretien, pour fonctionnement continu Déviation automatique du flux d'air Dispositif de séparation de rouleau actionné pneumatiquement, coupe même les chants de placage et PVC les plus résistants Commande par pédale pour l'usinage de pièces formées Épaisseur de pièce : 10 - 50 mm Puissance de chauffage : 3 kW Puissance raccordée : 3,3 kW Largeur minimale de la pièce : env. 25 mm Épaisseur des chants : env. 0,5 - 1 mm Rayon intérieur minimal : env. 25 mm Avancement : 4 m/min Hsdpowwxyksfx Aguenk Pneumatique : 6 bar Poids : env. 105 kg Disponibilité : court terme Emplacement : Röllbach

Stanje: dober (rabljeno), Brandt edge banding machine with AIRTEC + jointing unit Hjdpfx Asyz Sxboguenk Adhesives: EVA / PUR / Airtec Roll material: 0.4–3 mm edge thickness Strip material: 0.4–15 mm (12 mm) edge thickness Workpiece thickness: 8–60 mm Recently serviced!! Jointing unit OVERVIEW OF UNIT CONFIGURATION: Jointing milling unit 2 x 2.2 kW 200 Hz Gluing unit A12 End trimming unit, chamfer/straight, 2 x 0.35 kW Pneumatic adjustment for end trimming, chamfer/straight Pneumatic 2-point adjustment for end trimming Pre-milling unit 2 x 0.55 kW, 0 degrees Pneumatic 2-point adjustment Multi-function profile milling unit 2 x 0.4 kW Profile scraper with quick-change heads Pneumatic adjustment for scraper Glue joint scraper Buffing unit Feed rate: 8–18 m/min, with profiling cutter 14 m/min Total length: 5760 mm Roll material: 0.3–3 mm Strip material: 3–15 mm (If VKNR 4845 replacement milling units are used, max. edge thickness is 12 mm!) Gluing unit A12 Workpiece preheating Quickmelt application unit Adhesive reactivation by infrared Workpiece return conveyor BOOMERRANG TFU 140/R 20 Year of manufacture: 2016 As shown in the pictures Available from November 2026 All data taken from the data sheet, therefore no guarantee. Technical data available on request.

Stanje: rabljeno, Leto izdelave: 2014, with joint milling unit including DIA tools, jointing capacity up to 40 mm, workpiece thickness up to 3 mm. Combination milling station, radius R 2.5 mm. Technical description: - Hot-melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end trimming station (16,000 rpm) for front and rear protruding edges - HF milling station (16,000 rpm) with interchangeable cutter heads (combination version) and fine adjustment accessible from the operator side - Spare spaces for additional machining units (Hebrock system) - Feed approx. 10 m/min - Cutting depth adjustment for end trim saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double pressure roller top beam - Viewing windows on both rear and operator sides - PLC control including touchscreen Technical data: - Feed speed: 10 m/min - Panel thickness: 8–40 mm - Weight (depending on configuration): approx. 1,400 kg - Dimensions (L x W x H): 5,000 x 1,445 x 1,600 mm Airtronic for machines up to 8 mm edge thickness, 1 piece Technical data: - Edge thickness: 1.2–3.0 mm possible - Maximum panel thickness: 25 mm - Feed speed: 7–10 m/min depending on edge material - Ready for operation: 3 min - Air consumption: approx. 800 l/min for entire machine - Electrical connection: max. 32 A / 16 kW for entire machine, higher connection required with grooving saw - Extraction as usual - PLC control is mandatory Upgrade to 8 mm edge thickness, 1 piece, up to max. 40 mm workpiece thickness Including pneumatic saw adjustment, separate pneumatic cutter adjustment, 1 piece, controllable from the operator panel (straight/radius) Buffing station (polishing wheel), 1 piece Corner rounding unit, 1 piece, incl. combination tool and pneumatic adjustment for chamfer/radius, max. workpiece thickness: 40 mm Minimum workpiece length: 300 mm Radius R 2.0 mm Radius scraper, 1 piece, incl. pneumatic lift-off device Radius R 2.0 mm Surface scraper, 1 piece, with pneumatic actuation Glue pot quick-change system prepared, 1 piece, without second glue pot—inclusive option for PU glue processing with the machine, without downward glue outlet device Special cleaning system for PU glue outlet downward, 1 piece 60 mm panel thickness for machines w/ jointing, 1 piece - Max. workpiece thickness with jointing unit: 60 mm - Jointing range at 40 mm–60 mm - Workpiece thickness up to 2 mm Special infeed fence for overlaid panels, 1 piece, 16 mm and 19 mm thickness - Max. overlay protrusion: 8 mm Separate extraction for jointing unit, 1 piece, directly on the jointing unit, vertical upwards, d=80 mm for optimum extraction - Highly recommended from AKV 3005 DK-F Ball bearing for corner rounding unit, 24.1 mm, 1 piece Ball bearing for corner rounding unit, 24.2 mm, 1 piece Nesting for combination milling unit, 1 piece - For processing workpieces with hinge cup drillings - Only possible on underside of workpiece Hodpfx Agsyfp N Deusnk Nesting for radius scraper unit, 1 piece - For processing workpieces with hinge cup drillings - Only possible on underside of workpiece Release agent spray unit, 1 piece Cleaning agent spray unit, 1 piece, for easier removal of adhesive residue Antistatic spray unit, 1 piece - Mandatory for airtronic - Before the combination milling station, antistatic coolant is sprayed onto the inside of the edge overhang Storage location: Supplier

Stanje: rabljeno, Funkcionalnost: nepreverjeno, skupna višina: 1.800 mm, skupna dolžina: 9.500 mm, Debelina robnega traku: 0,3 - 30 mm Maksimalna višina robu: 66 mm Hnjdpoyzn Tbsfx Agujk Minimalna širina obdelovanca: 60 mm Minimalna dolžina obdelovanca: 140 mm Debelina obdelovanca: 6 - 60 mm