Hidralmac Portal-Richtpresse nakup rabljenega (1.524)

Stanje: novo, stiskalna sila: 400 t, HIDRALMAC Portal Straightening Press – 400 t – Column Width 3,400 mm – Traversing Bridge For sale is a hydraulic portal straightening press manufactured by HIDRALMAC with a pressing force of 400 t. This machine is designed for heavy-duty straightening and forming tasks and features a large-sized, traversing bridge as well as a cylinder with lateral travel. Thanks to its robust construction and high flexibility, it is ideally suited for large-format workpieces and demanding industrial applications. ==== Technical Data + Information: Kedjfhcc Rspfx Abyena Hydraulic Portal Straightening Press – 400 t ==== General Specifications - Manufacturer: HIDRALMAC - Model: Portal Straightening Press - Machine designation: Straightening Press - Design: Portal Press - Pressing force: 400 t - Machine weight: approx. 49 t - Dimensions (L × W × H): 7,900 × 5,500 × 4,300 mm ==== Working Area - Column width: 3,400 mm - Max. distance table – ram: 1,000 mm - Table height above floor: approx. 700 mm - Stroke: 500 mm ==== Movement & Flexibility - Bridge travel: 5,000 mm - Lateral travel of cylinder: 2,800 mm - Bridge traversing speed: 0–33 mm/sec - Cylinder lowering speed: 0–10 mm/sec - Cylinder stroke speed: 0–25 mm/sec ==== Hydraulics & Performance - Total power requirement: 55 kW - Pump capacity: max. 131 l/min - Retraction force: 26 t - Oil tank: 700 l ==== Construction & Equipment - Reinforced table at the front section (reinforcement over 1,500 mm, additional weight approx. 4,000 kg) - Protective covers for the drive motors of the bridge - Signal lamps on both right and left with protective covers - Gratings (galvanized) inside the drip tray ==== Application & Features - Robust design for heavy straightening operations - High flexibility thanks to traversing bridge and cylinder - Suitable for large and heavy workpieces ===== Straightening work, heavy forming, large components, steel construction, mechanical engineering Hydraulic press, straightening press, portal press, industrial press, forming press Are you looking for a hydraulic press tailored to your specific application? Contact us for a custom offer. Our hydraulic presses are manufactured according to German machinery directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply fully with Brazil’s national safety directive NR 12, which builds upon those standards. Our main strength lies in custom machine building and press automation. We supply tailored hydraulic presses at surprisingly attractive prices. For the hydraulic system, we primarily use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2019, stiskalna sila: 275 t, Portal Straightening Press – Manufacturer: Hidralmac – 275 t Gantry Press – Table 6,000 × 3,000 mm For sale is a powerful gantry-type portal straightening press by Hidralmac, featuring a press force of 275 t. The machine is equipped with a large-dimension table of 6,000 × 3,000 mm, a movable bridge, as well as a laterally adjustable cylinder, making it ideal for straightening, assembly, and heavy-duty processing of large-scale components. ==== Technical Data & Information: Portal Straightening Press Hidralmac – 275 t Gantry Design ==== General Information - Manufacturer: Hidralmac - Model: Portal Straightening Press - Design: Gantry Press - Press force: 275 t - Machine weight: approx. 40 t ==== Working Area - Frame opening: 3,000 mm - Table size: 6,000 × 3,000 mm - Table height: approx. 700 mm - Max. distance table – ram: 1,100 mm - Stroke: 900 mm ==== Movements & Travel Paths - Bridge travel (X/Y): 6,000 mm - Bridge traverse speed: 30 – 33 mm/s - Lateral cylinder adjustment: max. 3,000 mm - Cylinder movement via servo motor and rack & pinion ==== Speeds - Lowering speed: 2 – 10 mm/s - Stroke speed: 2 – 50 mm/s Knedpfx Abofxyigeyja ==== Hydraulics - Total power requirement: 30 kW - Pump system: Axial pump with proportional valve - Oil tank capacity: 450 l - Retraction force: 27 t ==== Cylinder - Cylinder diameter: Ø 440 mm - Ram extension: 200 mm / Ø ==== Control & Operation - Control system: Siemens S7-1200 - Monitor: Siemens Touch Panel 9" - Control desk: portable ===== Straightening, large component machining, heavy-duty assembly, steel construction, mechanical engineering, maintenance, special applications Gantry press, straightening press, hydraulic press, industrial press, heavy-duty press, die spotting press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your individual application? Contact us for a custom offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with Brazil’s NR 12 national safety guidelines, which are based on those standards. The hydraulics of our presses are primarily equipped with components from leading European manufacturers.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, številka stroja/vozila: DF0147, Straightening Press – Manufacturer: Hidralmac – 150 t Profile Straightening Press – Servo Controlled A high-precision profile straightening press from Hidralmac with a press force of up to 150 t is available for sale. The machine features two hydraulic cylinders, a servo-driven traverse unit, as well as camera-assisted process monitoring. It is ideally suited for the precision straightening of profiles and components with strict quality requirements. ==== Technical Data & Information: Profile Straightening Press Hidralmac – 150 t Profile Straightening Press ==== General Information - Manufacturer: Hidralmac - Model: Straightening Press - Design: Profile straightening press with double cylinder - Press force: 15 – 150 t (continuously adjustable) - Machine weight: approx. 11.5 t - Space requirements: approx. 8,800 × 1,800 × 2,200 mm ==== Working Area - Cylinder diameter: Ø 100 mm ==== Hydraulics and Drive - Total power requirement: 20 kW - Servo motor: 2 kW - Cooling unit: 1 kW - Oil tank capacity: 350 l - Electric oil cooling: max. 1 kW Ksdpfofxygwjx Abyena ==== Speeds - Pressing speed: 0 – 9.9 mm/s (infinitely adjustable via joystick) - Traverse speed of clamping plate: up to 100 mm/s ==== Control and Operation - Joystick control - Monitor display with reference line and scale - Camera system for visual process monitoring - Program management for various profiles ==== Table and Clamping System - Traversable clamping plate on linear guides - Drive via chain and servo motor - Quick-adjustable holder and clamping system - Interchangeable straightening segments (10 inserts included) - Basic equipment for one profile included in delivery ==== Process Description - Positioning of the profile via clamping system - Visualization of deviation by camera system - Manual adjustment via joystick - Continuous monitoring during operation ==== Operating Conditions - Ambient temperature: 5 – 60 °C - Relative humidity: up to 90% at 20 °C / 50% at 40 °C - Installation height: up to 1,000 m above sea level - Power fluctuation: ± 10% ===== Profile straightening, precision straightening, metalworking, maintenance, serial production, quality correction, component processing Straightening press, profile straightening press, hydraulic press, servo straightening press, double cylinder press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply in all respects with the national Brazilian safety directive NR 12, which builds upon these standards. Our main strengths are custom machine design and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics, we mainly use components from leading European manufacturers.

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 500 t, ME-Pressen Gantry Straightening Press – 500 t – 2,000 × 850 mm – Stroke 1,300 mm For sale is a hydraulic gantry straightening press from ME-Pressen with a pressing force of 500 t. This machine is specifically designed for straightening and bending operations and features an integrated tool clamping system as well as parallel alignment for bending beams. Thanks to a traversable table, movable cylinder, and robust construction, it is ideally suited for flexible applications in toolmaking and series production. ==== Technical Data & Information: Hydraulic Gantry Straightening Press – 500 t ==== General Information - Manufacturer: ME-Pressen - Model: Gantry Straightening Press - Design: Gantry Press - Machine type: Sliding Table Press / Straightening Press - Pressing force: 500 t (5,000 kN) - Machine weight: approx. 25 t - Dimensions (L × W × H): approx. 1,500 × 3,000 × 4,300 mm - Number of operator sides: 3 ==== Working Area - Max. opening width: 1,500 mm - Stroke: 1,300 mm - Min. opening: 200 mm - Table height above floor: approx. 850 mm - Open height: 1,500 mm ==== Table & Movement - Table size: 2,000 × 850 mm - Table hydraulically traversable: 700 mm outwards - Table with grid construction - Cylinder horizontally movable via rack and pinion ==== Speeds - Closing speed: up to 17 mm/s - Opening speed: up to 44 mm/s - Pressing speed: load-dependent ==== Hydraulics & Performance - Pressure adjustment: 80–500 t via rotary control - Pressure build-up time: max. 3 sec - Free pull-off force: max. 800 kN - Oil temperature monitoring included - Lubrication via grease nipples ==== Construction & Equipment - Integrated tool clamping system - Parallel alignment for bending beam - Induction-hardened cylinder - Machine body powder-coated / double painted - T-slots customizable as per client request ==== Operation & Safety - Remote control - Robust design for industrial applications ==== Accuracy - Deflection: ≤ 1.2 mm/m (at 70% load) ===== Straightening, bending processes, toolmaking, series production, heavy-duty forming Kjdpfx Abswgakvsyona Hydraulic press, hydraulic press, gantry press, straightening press, sliding table press, industrial press, forming press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery guidelines as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety directive NR 12, which builds upon these standards. Our main strength is custom machine construction and press automation. We provide tailor-made hydraulic presses at surprisingly affordable prices. The hydraulics of our presses primarily use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2019, stiskalna sila: 400 t, Gantry Straightening Press – Manufacturer: Hidrobrasil – 400 t Gantry Press – Table 2,500 × 2,000 mm For sale is a powerful gantry straightening press from Hidrobrasil with a pressing force of 400 t. The machine features a large table surface of 2,500 × 2,000 mm, robust gantry frame construction, and high precision, making it ideally suited for heavy-duty straightening, assembly, and forming tasks. ===== Technical Data & Details: Gantry Straightening Press Hidrobrasil – 400 t Gantry Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Gantry Straightening Press - Design: Gantry Press / Frame Press - Pressing force: 400 t - Machine weight: approx. 26 t ==== Working Area - Upright distance: 2,500 mm - Stroke: 600 mm - Distance table – ram: 600 mm ==== Table System - Table size: 2,500 × 2,000 mm ==== Speeds - Approach speed: 9 mm/s - Return speed: 19 mm/s ==== Hydraulics - Total power requirement: 18 kW - Pump capacity: 67 l/min ===== Straightening, assembly work, heavy-duty processing, forming technology, maintenance, metalworking, large components Gantry press, straightening press, hydraulic press, frame press, heavy-duty press, industrial press Knjdpfx Ajd Ttydobyja Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised offer. Our hydraulic presses are manufactured in compliance with German machine directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which is based on these standards. Our core competency lies in special-purpose machine construction and press automation. We offer custom-made hydraulic presses at surprisingly affordable prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: -, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 40 t, Gantry Straightening Press – Manufacturer: Hidrobrasil – 40 t Gantry Press – Table 635 × 555 mm For sale is a gantry straightening press by Hidrobrasil with a pressing force of 40 t. The machine is based on a proven design, can be newly manufactured at short notice and individually customized, and is ideal for straightening, assembly, pressing-in, and pushing-out applications. ==== Technical Data & Information: Gantry Straightening Press Hidrobrasil – 40 t Gantry Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Gantry Straightening Press - Design: Gantry press / frame press - Pressing force: 40 t - Machine weight: approx. 1,500 kg - Dimensions (W × D × H): 1,880 × 900 × 2,300 mm ==== Working Area - Maximum opening width: 500 mm - Table-to-floor distance: 1,200 mm - Column spacing: 900 mm ==== Table System - Table size: 635 × 555 mm - Table thickness: 70 mm - Execution: open, closed, or with T-slots (optional) ==== Hydraulic Cylinder - Stroke: 550 mm - Cylinder diameter: Ø 150 mm - Piston rod: Ø 90 mm - Operating pressure: max. 280 bar ==== Hydraulics - Pump: ASC - Delivery rate: 12 l/min - Motor power: 4 kW - Return speed: 16 mm/s - Idling speed: 10 mm/s - Oil tank volume: 120 l - Hydraulic block / valves: Hydropack - Pressure gauge: Manometer - Pressure adjustment: adjustable - Pressure switch: present - Power unit: side mounted ==== Operation - Manual lever control - Sensitive speed regulation - Pressure adjustment via rotary control ==== Electrical Equipment - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 5 kW ==== Control Cabinet - Protection class: IP54 - Reserve space: approx. 30 % - Mode selector switch: lockable - Components: Siemens, Allen-Bradley, Sick ==== Features and Special Details - Integrated tool holder in the press ram (up to Ø 250 mm) - Custom table configuration possible - Design can be adapted to customer requirements ==== Standards and Documentation - CE documentation - Spare parts lists - Electrical schematics and parts lists (digital) - Standards: - 2006/42/EC Machinery Directive - 2014/35/EU Low Voltage Directive - 2014/30/EU EMC Directive - EN ISO 16092-1 / -3 - EN 60204-1 - EN ISO 12100 - EN ISO 4413 ===== Kjdpfx Abeyia D Reysna Straightening, assembly, pressing-in, pushing-out, workshop applications, maintenance, series production Gantry press, straightening press, hydraulic press, workshop press, assembly press, insertion press, frame press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which is based on these directives. Our main strength is special-purpose machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. We mainly use components from leading European manufacturers for the hydraulics of our presses.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, stiskalna sila: 200 t, Portal Gantry Straightening Press – Manufacturer Hidrobrasil – 200 t Gantry Press – Table 4,000 × 2,000 mm Knodexrb Nbopfx Abyja For sale is a versatile gantry straightening press from Hidrobrasil with a pressing force of 200 t. The machine features a large table area of 4,000 × 2,000 mm, a laterally traversable cylinder, and a longitudinally movable bridge structure, making it ideal for large-format straightening, assembly, and special applications. ==== Technical Data & Information: Gantry Straightening Press Hidrobrasil – 200 t Gantry Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Gantry Straightening Press - Design: Gantry press - Pressing force: 200 t - Working pressure: max. 285 bar ==== Working Area - Table size: 4,000 × 2,000 mm - Clear width / height: 1,500 mm - Column spacing: 2,050 mm - Stroke: 1,500 mm ==== Movements & Travel - Cylinder lateral adjustment: max. 1,450 mm - Bridge longitudinal adjustment: max. 2,800 mm - Approach speed: 20 mm/s - Working speed: 2 mm/s ==== Design & Equipment - Hydraulic power unit mounted on top of the press - Hydraulic block and valves by Bosch Rexroth - Air and oil filters by Filtrec - Combination of air and water cooling - Lift cylinders integrated in the work table - Machine control via wireless remote (2-button system) - Anti-rotation device for the cylinder - Machine status and diagnostic system via touchscreen ==== Auxiliary System Lift Cylinder - Number of lift cylinders: 10 units - Rod diameter: 25 mm - Stroke: 80 mm - Actuation via hydraulic system or controller ==== Control & Operation - Siemens PLC: S7-1200 - Siemens touchscreen: KTP900 – 9" - Up to 99 programs storable - Functions: - Adjustment of stroke, pressure and holding time - Decompression time - Piece counter - Alarm management - Real-time monitoring of all parameters - Positioning accuracy: ± 0.1 mm ==== Safety & Monitoring - Emergency stop system - Two-hand/wireless operation with safety release - Safety strip on gantry columns - Hydraulic oil temperature monitoring - Automatic shutdown in case of overtemperature (> 65 °C) - Filter monitoring - CE compliant ==== Hydraulics - Main drive: 5.5 kW - Oil volume: not included - Oil temperature control with automatic cooling ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Components: Siemens, Allen Bradley, Phoenix ===== Straightening work, large components, assembly work, special-purpose machine engineering, steel construction, maintenance, pressing work Gantry press, Straightening press, Hydraulic press, Industrial press, Special-purpose machine, Die tryout press, Tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery guidelines, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety standard NR 12, which builds on these regulations. Our key strength lies in special-purpose machine construction and press automation. For the hydraulics of our presses, we mainly use components from leading European manufacturers.

Stanje: novo, Stroke length (max.): 400 mm Pump capacity: 45 cc – 65 L/min Motor: 22 kW (IE-3) Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Table area: 3500 mm x 2000 mm Clear width: 2200 mm Bridge travel: 2800 mm Return speed: 50 mm/sec Dimensions (LxWxH): 3500 x 3200 x 3600 mm Cylinder: Ø 370 mm – Capacity: 3000 kN (280 bar – 300 ton) Key Specifications: - Cylinder diameter: Ø 370 mm - Table dimensions: 3500 x 2000 mm (clear width: 2200 mm) - Load-bearing surface: 3000 x 2000 mm - Bridge travel: 2800 mm - Lateral cylinder travel: 900 + 900 mm from center (total 1800 mm) - Maximum installation height: 1200 mm (distance from table or cover plate to cylinder piston WITHOUT mandrels) - Stroke length: 400 mm - Motor: 22 kW (IE-3) - Pump: 45 cc – 65 L/min (KAWASAKI) - Forward speed: 10 - 5 mm/sec - Return speed: 50 mm/sec - Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Equipment: - Hydraulics: DUPLOMATIC - Control: Siemens S7-1200 - BEIJER 7'' display - Control cabinet mounted to side wall of bridge - Swivel operator panel - Pressure adjustable via display (50 – 300 ton) - Speed adjustable via throttle valve Kodpjr Etuljfx Abysna - Cylinder with chrome plating - Wired remote control - Stroke length adjustable via distance sensors - 400 V, 50 Hz, 3 phase power supply - Anti-rotation lock for cylinder - Lateral movement of cylinder via drive motor - Bridge movement via drive motor - Bridge area safeguarded by light curtain (Datalogic) - Cylinder mandrels: Ø 200 / 400 / 600 mm, in length - 3 extension mandrels included (Example photo)

Stanje: novo, Stroke length (max.): 400 mm Pump capacity: 45cc–65 L/min Motor: 22 kW (IE-3) Table height: 750 mm (without base plate) / 820 mm (with base plate) Table dimensions: 3000 mm x 2000 mm Clearance width: 2200 mm Bridge traverse: 2300 mm Return speed: 50 mm/s Capacity: 3000 kN (280 bar – 300 tons) - Cylinder: Ø 370 mm - Table size: 3000 x 2000 mm; clearance width: 2200 mm - Bridge traverse: 2500 mm - Lateral cylinder travel: 900 + 900 mm from center (total 1800 mm) - Installation height: max. 1200 mm (distance from table or base plate to cylinder piston) WITHOUT MANDRELS - Stroke length: 400 mm - Pump: 45 cc – 65 L/min - Forward speed: 10 – 5 mm/sec - Return speed: 50 mm/sec - Motor: 22 kW (IE-3) - Table height: 750 mm (without base plate), 820 mm (with base plate) Ksdsr D U I Djpfx Abyjna Accessories: - Hydraulics: DUPLOMATIC - Control: LENZE & SCHNEIDER - Control cabinet mounted on bridge sidewall - Pressure adjustable via rotary valve - Speed adjustable via throttle valve - Cylinder chrome-plated - Remote control (wired) - Stroke length adjustable via distance sensors - 400 V, 50 Hz, 3-phase - Rotary lock for cylinder - Cylinder laterally adjustable by drive motor - Bridge traversable by drive motor - Soft starter for motor - Cylinder piston mandrels: Ø 200 / 400 / 600 mm, long - 3 extension mandrels included (Sample photo)

Stanje: novo, Leto izdelave: 2025, Table surface: 2000 x 1000 mm Installation height: 700 mm (distance between table and piston tip) Table height: 800 mm Cylinder: Ø 240 mm Motor: 7.5 kW Pump capacity: 22 l/min Forward speed: 9 mm/s Return speed: 13 mm/s Tank capacity: 70 l Capacity: 150 tons – 340 bar / 172 tons – 380 bar Motor control via hand lever Cylinder manually adjustable sideways Bridge adjustable via handwheel Table surface: 2000 x 1000 mm Installation height: 700 mm (distance between table & piston tip) Piston stroke: 400 mm Table height: 800 mm Ksdpjhu H Dpofx Abyona Cylinder: Ø 240 mm Motor: 7.5 kW Pump: 22 l/min – ASC Speed: forward 9 mm/s – return 13 mm/s Tank volume: 70 l Pressure regulator valve Pressure gauge indicator Pressure hold valve Weight: 2,300 kg

Stanje: pripravljen za uporabo (rabljen), Razpon: 3950 mm Skupna višina: 3650 mm Nosilnost: 4000 kg Kedpfjzp Iqgex Abyona brez dvižne naprave

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06651, potovalna razdalja osi X: 6.800 mm, pomik osi Y: 3.700 mm, pomik po osi Z: 1.500 mm, hitrost pomika os X: 15 m/min, hitrost podajanja osi Y: 15 m/min, hitrost podajanja os Z: 10 m/min, skupna dolžina: 15.000 mm, skupna širina: 7.500 mm, največja hitrost vretena: 4.000 obr/min, skupna višina: 7.000 mm, višina mize: 1.100 mm, hitro pomikanje X-os: 15 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 10 m/min, razdalja med stojali: 3.300 mm, vrsta vhodnega toka: trifazni, obremenitev mize: 50.000 kg, največja hitrost vrtenja: 4.000 obr/min, razdalja od središča mize do nosu vretena: 2.110 mm, skupna masa: 110.000 kg, moč vretenovega motorja: 50.000 W, dolžina elektro omare: 7.000 mm, višina krmilne omare: 2.000 mm, širina krmilne omare: 600 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Portalna stružnica za 5-osno obdelavo, v odličnem stanju, trenutno v fazi obnove. MODEL: Portalni tip LETO IZDELAVE: 1992, prenovljena 2002, prenovljena 2018 ŠTEVILKA: 06651 KATEGORIJA: Strugi, tip planer, CNC ZMOGLJIVOST: Hod osi X: 6800 mm Hod glave osi Y: 3700 mm Hod vretena osi Z: 1500 mm, fiksna prečna osnova Prečni prerez vretena: 500 mm x 500 mm Razdalja med stebri: 3300 mm Razdalja med mizo in površino vretena: 2110 mm, vertikalni prehod 2000 mm Velikost mize: 6000 x 2500 mm Premer vretena (vretenskega konusa): 250 mm Konus vretena: ISO #50 Hitrost vretena: 0-4000 RPM Motor vretena: 50 KW OPREMA: FIDIA System C20 CNC nadzorni sistem, nov leta 2002 CNC dvosmerna neprekinjena stružna glava Univerzalna stružna glava z avtomatskim indeksiranjem Stružna glava s pravim kotom z avtomatskim indeksiranjem Ravna stružna glava Vozički za zamenjavo glave in orodja Hidrostatična ležaja Sistem za hlajenje Polnoodsevni transportni sistemi za odrezke na obeh straneh Zaščitni pokrovi za vodila Ksdpfx Aeyahv Sjbyena Hitri premiki: Z-10.000 mm/min, X in Y-15.000 mm/min Nosilnost mize: največ 50.000 kg Teža stroja: 110.000 kg Zunanje mere: 15.000 x 7.500 x 7050 mm

Stanje: generalkompletno obnovljen (rabljeno), Portalrichtpresse Druckkraft: 450 t Hub: 50 mm Lichte Weite: 1000 mm Knodpfjfcnu Isx Abysa Arbeitsbereich: Länge: 5.200 mm Breite: 2.300 mm Höhe: 1.000 mm Gewicht: 45.000 kg Schraubenabstand links-rechts: 1.000 mm

Stanje: rabljeno, Leto izdelave: 2017, stiskalna sila: 500 t, Hidralmac Four-Column Press – 500 t – 1,900 × 800 mm – Stroke 600 mm For sale is a hydraulic four-column press from Hidralmac with a pressing force of 500 t. This machine is designed for demanding production processes in continuous operation, offering high stability, precise control, and comprehensive monitoring and adjustment options. Its robust construction and powerful hydraulics make it ideal for forming, pressing, and serial production applications. ==== Technical Data & Information: Hydraulic Four-Column Press – 500 t ==== General Details - Manufacturer: Hidralmac - Model: Four-Column Press - Design: Hydraulic column press - Machine designation: Production press - Pressing force: 500 t - Machine weight: approx. 18 t - Dimensions (L × W × H): approx. 2,400 × 2,400 × 5,500 mm - Operation: Two-hand control ==== Working Area - Clearance width: 1,300 × 800 mm - Working height: 700 mm - Stroke: 600 mm - Table height above floor: approx. 1,000 mm Kodsd E Irmspfx Abyena ==== Table & Ram - Table size: 1,900 × 800 mm - Ram size: 1,300 × 800 mm - Column diameter: 200 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 5–10 mm/s - Return speed: 150 mm/s ==== Hydraulics & Drive - Motor power: 50 kW - Retraction force: 50 t - Number of cylinders: 1 - Oil tank volume: 1,500 l - Oil capacity: approx. 1,400 l - Oil cooling: electric ==== Control & Functions - Position measurement via linear scale - Adjustable parameters: pressure, speed, stroke, holding positions - Switching point from rapid traverse to pressing speed freely definable - Pressure monitoring with automatic return or pressure-hold function - Constant pressure holding with approx. 5% tolerance - Automatic monitoring of hydraulics, pumps, and temperature - Synchronous movement monitoring and automatic correction for load deviations - Monitor control for programming and operation - Electrical cabinet mounted on the machine ==== Design & Equipment - Columns and cylinder made of tool steel, induction-hardened and chrome-plated - Ram guides with bronze slide bushings - Adjustable two-hand operation - Robust machine frame for heavy industrial duty ==== Scope of Delivery & Documentation - Manuals and operating instructions (two copies) - CE declaration - Safety inspection by authorized personnel - 3D drawings for customer approval ==== Forming technology, serial production, pressing processes, industrial production, heavy-duty applications Hydraulic press, hydraulic column press, four-column press, column press, production press, industrial press, forming press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our strength lies in special-purpose machinery and press automation. We offer customized hydraulic presses at surprisingly affordable prices. For the hydraulics, we mainly use components from leading European manufacturers.

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: A2536805, stiskalna sila: 40 t, Hidralmac Single-Column Hydraulic Press – 40 t Forge Press – Stroke 250 mm For sale is a Hidralmac single-column hydraulic press (C-frame) with a pressing force of 40 t. The machine is designed for forging, forming, and bending applications and can be newly manufactured to customer specifications. With adjustable speeds, precise position control, and flexible operating modes, it is suitable for both manual setup and automated production processes. ===== Technical Data & Information: Hydraulic Single-Column Press – 40 t ==== General Information - Manufacturer: Hidralmac - Model: Single-Column Press / Forge Press - Construction Type: C-Frame Press - Press Force: 40 t - Production Time: approx. 3 months after receipt of payment ==== Working Area - Open Height: 450 mm - Stroke / Travel: 250 mm ==== Table & Ram - Table Plate: 600 × 650 mm with T-slots - Ram Plate: 500 × 200 mm - Table Cut-Out: 200 × 170 mm - Table Height: 850 mm ==== Speeds - Approach Speed: max. 90 mm/s - Pressing Speed: 10 mm/s - Return Speed: max. 90 mm/s - Setup Mode: approx. 9.5 mm/s ==== Hydraulics & Drive - Motor Power: 5.5 kW - Oil Tank: 200 l - Retraction Force: 6.3 t Knjdpfofxyhfex Abyoa ==== Control & Features - Positioning Accuracy: ± 0.5 mm - Adjustable Hold Time: 0 – 10 s (in 0.1 s increments) - Pressing Pressure Adjustable via Control System - Toggle between Manual and Automatic Operation via Key Switch - Two-Hand Operation for Safe Handling - Sensor-Based Position Control (top dead center, bottom dead center, changeover point) ==== Operating Modes - Manual Setup Mode with Stop at Any Time - Bending Mode via Two-Hand Control - Automatic Mode for Closed Tools - Optionally Usable for Punching, Blanking, and Bending ===== Forging, metal forming, bending, punching operations, hole punching, small batch production, toolmaking Single-column press, C-frame press, forge press, hydraulic press, industrial press, bending press, die set press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German and European machinery directives (Directive 2006/42/EC), EC norms, and EU safety regulations. Additionally, our presses surpass Canadian and European safety requirements, as they also fully comply with Brazilian national safety directive NR 12, which builds upon these standards. Our core expertise lies in custom machine construction and press automation. We offer bespoke hydraulic presses at remarkably competitive prices. For the hydraulic systems, we mainly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2017, številka stroja/vozila: DF0152, stiskalna sila: 80 t, HIDRALMAC Four-Column Press – 80 t – 800 × 800 mm – Deep Drawing Press with Cushion For sale is a hydraulic four-column press (deep drawing press) manufactured by HIDRALMAC, offering a press force of 80 t. This machine is designed for drawing and forming processes and features an integrated deep drawing cushion, as well as state-of-the-art control and safety technology. Thanks to its compact design and robust components, it is ideally suited for small batch production, toolmaking, and precision forming tasks. ==== Technical Data & Information: Hydraulic Four-Column Press – Deep Drawing Press – 80 t ==== General Information - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine Type: Deep Drawing Press - Design: Four-Column Press - Pressing Force: 80 t - Machine Weight: approx. 5.1 t - Total Power Requirement: 12 kW - Operation: Two-hand operation - Main Cylinder: 1 unit ==== Working Area - Working Area: 800 × 800 mm - Table Size: 800 × 800 mm - Working Height: 800 mm - Table Height: 800 mm - Stroke: 500 mm - Travel Path: 700 mm Ksdpfx Abofxyh Hoyjna ==== Table & Ram - Ram Plate: 2,800 × 1,300 mm - Column Diameter: 75 mm ==== Speeds - Approach Speed: 9.8 mm/sec - Working Speed: 9.8 mm/min - Return Speed: 18 mm/sec ==== Deep Drawing Unit - Cushion Force: 25 t (at 280 bar) - Cushion Stroke: 200 mm - Rod Diameter: 30 mm - Cushion Speed: 80 mm/sec - Deep Drawing Cushion Motor: 10 kW ==== Hydraulics & Performance - Main Motor: WEG 15 kW - Pump: Rexroth / Parker axial piston pump - Hydraulic Block & Valves: Rexroth / Parker - Hydraulic Tank: 300 l (oil requirement approx. 250 l) - Additional Oil Tank: 150 l - Hydraulic Pressure Regulation: via PLC (from 10 t) - Air cooling with electric fan - Lubrication: manual via grease nipples or cartridges ==== Control & Operation - Control System: Siemens / Moeller - Operating Modes: automatic, semi-automatic, manual (setup mode) - Control Panel on swivel arm - Movable two-hand operation - USB interface for data transfer - Remote control (Siemens remote maintenance) - Spacer sensors for stroke length adjustment - Pressure consistency: 0–10 sec ==== Safety & Equipment - Light barriers in front and rear (Schmersal, 800 mm) - Additional diagonal guards in lower area - Hydraulic safety monitoring ===== Drawing, forming, small batch production, toolmaking, sheet metal forming Hydraulic press, deep drawing press, four-column press, forming press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery guidelines, as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety guideline NR 12, which builds on the aforementioned standards. Our core strengths include custom machine construction and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulic systems, we primarily use components from leading European manufacturers.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2016, stiskalna sila: 160 t, HIDRALMAC Four-Column Press – 160 t – 1,200 × 800 mm – Tryout Press For sale is a hydraulic four-column press (tryout press) from HIDRALMAC with a pressing force of 160 t. This machine is ideal for tool testing, adjustment work, and small production runs. Thanks to its compact design, precise control, and robust construction, it offers a reliable solution for workshop and production environments. ===== Technical Data & Information: Hydraulic Four-Column Tryout Press – 160 t ==== General Information - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine Type: Tryout Press - Design: Four-Column Press - Pressing Force: 160 t - Machine Weight: approx. 7 t - Total Power Requirement: 7.5 kW - Main Cylinder: 1 unit ==== Working Area - Installation Height: 800 mm - Stroke: 600 mm - Table Height: 850 mm - Column Gap (Lateral): 400 mm ==== Table & Load - Table Size: 1,200 × 800 mm - Maximum Table Load: 5 t - Return Force: 16 t Kodpfx Abefxyi Ieysna ==== Speeds - Approach Speed: 1–9.8 mm/sec - Return Speed: 1–9.8 mm/sec ==== Hydraulics & Operation - Oil Volume: approx. 220 l (AW 46) - Robust, low-maintenance hydraulic layout ==== Construction & Features - Column Diameter: 160 mm - Compact design for flexible applications - Suitable for tool adjustment and tryout work ===== Tool calibration, tryout operations, small batch production, tool making, forming technology Hydraulic press, tryout press, four-column press, industrial press, forming press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machine directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements because they comply in all points with the Brazilian NR 12 national safety guidelines, which build on these. Our core strength lies in special machine construction and press automation. We offer custom-made hydraulic presses at surprisingly attractive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2017, številka stroja/vozila: DF0052, stiskalna sila: 200 t, HIDRALMAC Double-Column Press – 200 t – 1,200 × 1,000 mm – Deep Drawing Press Kjdpfx Aofxyirjbyona For sale is a hydraulic double-column press (deep drawing press) from HIDRALMAC with a pressing force of 200 t. This machine is designed for demanding deep drawing and forming processes and, thanks to modern control technology, high operating speeds, and precise pressure regulation, offers optimal conditions for industrial series production. ==== Technical Data & Information: Hydraulic Double-Column Press – Deep Drawing Press – 200 t ==== General Information - Manufacturer: HIDRALMAC - Model: Double-Column Press - Machine description: Deep Drawing Press - Design: Double-Column Press - Pressing force: 200 t - Machine weight: approx. 20.5 t - Space requirements (L × W × H): approx. 4,000 × 2,600 × 5,000 mm - Main cylinder: 1 unit ==== Working Area - Column clearance: 1,200 × 1,000 mm - Installation height: 800 mm - Working height: 1,100 mm - Stroke: 600 mm ==== Table & Slide - Table plate: 1,200 × 1,000 mm - Slide plate: 1,200 × 1,000 mm - T-slots: per DIN 650-22 (custom options available) - Return force: 20 t ==== Speeds - Approaching speed: 170 mm/sec - Return speed: 150 mm/sec - Working speed: 15 mm/sec - Setup mode: 2–10 mm/sec ==== Hydraulics & Performance - Total power requirement: 32.5 kW - Axial piston pump: Bosch Rexroth - Hydraulic block: Rexroth - Oil requirement: approx. 500 l - Oil cooling: electric - Pressure control: via PLC (from 20 t) - Pressure hold time: 0–10 sec ==== Control & Operation - Control system: PLC - Voltage: 400 V / 50 Hz - Control voltage: 24 V - Pressure setting: 20–200 t via monitor - Storage capacity: up to 200 programs - Operation: movable two-hand control - Socket in the control cabinet: 220 V ==== Application & Features - Precise control for deep drawing processes - High repeat accuracy - Suitable for mass production and toolmaking ==== Deep drawing, forming, serial production, sheet metal processing, toolmaking Hydraulic press, double-column press, deep drawing press, forming press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery guidelines, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements by fully complying with the Brazilian national safety directive NR 12, which builds upon these standards. Our major strength lies in special purpose machine construction and press automation. We offer bespoke hydraulic presses at surprisingly affordable prices. For the hydraulics, we use predominantly components from leading European manufacturers.

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 4303, stiskalna sila: 500 t, Hidralmac Four-Column Hydraulic Press – 500 t – 2,100 × 1,500 mm – Stroke 1,000 mm For sale is a hydraulic four-column press from Hidralmac with a pressing force of 500 t. The machine is designed for demanding forming processes in industrial continuous operation and, thanks to its multi-cylinder technology, high dynamics, and comprehensive control and monitoring functions, offers a precise and powerful solution for complex applications. ===== Technical Data & Information: Hydraulic Four-Column Press – 500 t ==== General Information - Manufacturer: Hidralmac - Model: Four-Column Press - Type: Hydraulic Column Press - Machine designation: Forming Press - Pressing force: 500 t (max. 550 t with reserve) - Machine weight: approx. 39 t - Dimensions (L × W × H): 5,100 × 2,800 × 4,040 mm ==== Working Area - Clearance: 2,100 × 1,500 mm - Installation height: 1,500 mm - Stroke: 1,000 mm - Table height above floor: approx. 850 mm ==== Table & Ram - Table size: 2,100 × 1,500 mm (with T-slots) - Ram size: 2,100 × 1,500 mm - Total table plate size: approx. 2,750 × 1,600 mm - Total ram plate size: approx. 2,750 × 1,600 mm ==== Speeds - Approach speed: 300 mm/s - Return speed: 300 mm/s - Pressing speed: - 200 t: 28 mm/s - 300 t: 20 mm/s - 500 t: 6 mm/s ==== Hydraulics & Drive - Total power requirement: 62 kW - Return force: 40 t - Main cylinders: 2 units - Auxiliary cylinders: 2 units - Axial piston pump: Bosch Rexroth A4VSO125 (approx. 290 l/min) - Hydraulic block: Rexroth - Oil tank volume: approx. 2,000 l - Pressure control via PLC (min. 50 t) - Pressure holding time: 0–900 sec - Energy saving through automatic pump shut-off when tool is closed ==== Ejector & Auxiliary Systems - Ejector: 4 × 15 t at 250 bar - Ejector stroke: 300 mm (adjustable via PLC) - Ejector speed: - Forward: 95 mm/s - Return: 240 mm/s ==== Control & Electrical - Control: Siemens S7-300 - Monitor control with pressure and position programming - Storage capacity: up to 200 programs - Electronics: Siemens / Möller - Operator panel on swivel arm - Voltage: 400 V / 50 Hz - Control voltage: 24 V ==== Safety & Monitoring - Light curtains by SICK (1,500 mm, front) - Monitoring of hydraulics, pumps, and temperature - Synchronous monitoring of main cylinders with automatic correction - Pressure monitoring with automatic retraction or holding function (± 5%) ==== Construction & Features - Main cylinder column diameter: 360 mm - Auxiliary cylinder column diameter: 120 mm - Material: ASTM A36, manufactured according to DIN 8651 - 8 mm polycarbonate safety glazing in working area and doors - Liquid channel around table (25 mm radius) ==== Additional System - Nitrogen compression unit (up to 280 bar, connectable) Kedpfxjdyynvs Abyena ===== Forming technology, heavy forming, series production, large-part machining, industrial manufacturing Hydraulic press, hydraulic column press, four-column press, column press, forming press, industrial press, production press

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, stiskalna sila: 400 t, HIDRALMAC Four-Column Hydraulic Press – 400 t – 2,500 × 1,600 mm – Deep Drawing Press with Cushion For sale is a HIDRALMAC hydraulic four-column press (deep drawing press) with a pressing force of up to 400 t. This machine is specifically designed for demanding deep drawing and forming processes. It features a powerful deep drawing cushion as well as state-of-the-art control and safety technology. Its robust construction and comprehensive equipment make it ideal for industrial series production and complex forming tasks. ===== Technical Data & Information: Hydraulic Four-Column Press – Deep Drawing Press – 400 t ==== General Data - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine designation: Deep Drawing Press - Design: Four-Column Press - Pressing force: 50–400 t (adjustable) - Machine weight: approx. 27.5 t - Dimensions (L × W × H): approx. 3,950 × 2,200 × 4,850 mm - Main cylinders: 2 units ==== Working Area - Pass-through width: 2,500 mm - Installation height: 1,300 mm - Stroke: 900 mm - Table height above floor: approx. 900 mm ==== Table & Ram - Table size: 2,500 × 1,600 mm - Ram size: 3,100 × 1,600 mm - Column diameter: 220 mm - Retraction force: 40 t - T-slots: According to DIN 650-22 (custom options available) ==== Speeds - Approach speed: 200 mm/sec - Return speed: 200 mm/sec - Working speed: 5–15 mm/sec ==== Deep Drawing Unit - Drawing cushion size: 1,400 × 800 mm - Drawing cushion force: 30–60 t - Drawing cushion stroke: 250 mm - Drawing cushion speed: 5–80 mm/sec ==== Hydraulics & Power - Total power requirement: 62 kW - Oil tank: 1,500 l - Oil capacity: 1,200 l - Hydraulic components: Bosch Rexroth - Pressure build-up: up to 400 t within max. 4 seconds - Pressure control: adjustable via monitor ==== Control & Operation - Control system: Siemens - Monitor: Siemens 12" - Operating modes: manual, semi-automatic, fully automatic - Travel distance control adjustable via monitor - Remote maintenance capability - Two-hand control on mobile stand - Electrical control cabinet for wall mounting ==== Safety & Equipment - Safety PLC for hydraulic block monitoring - Light sensors at the front and rear: SICK (1,300 mm) - Side safety doors left & right (each 1,000 × 800 mm) - Interior LED lighting Kedoin Et Nepfx Abyjna - Energy control system (idle power consumption reduced to approx. 2 kW) ==== Construction - Sturdy welded construction - Machine steel ASTM A36 - Induction-hardened and chrome-plated piston rods - Low maintenance and reliable - CE certificate - Documentation in German ===== Deep drawing, forming technology, series production, sheet metal forming, toolmaking Hydraulic press, deep drawing press, four-column press, forming press, industrial press, production press Are you looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our expertise is in custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly competitive prices. We use predominantly components from leading European manufacturers for our hydraulic systems.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, stiskalna sila: 15 t, Hidralmac C-frame Press – 15 t – Assembly Press – Manual Combination Press For sale is a compact hydraulic C-frame combination press from Hidralmac with a press force of 15 t. This machine is a custom manual version and is ideal for flexible assembly, straightening, and pressing operations in workshop and service environments. The table can be swung out to the left. The lower base plate can be inserted at three different heights. The press ram can be manually lowered using the cross handle. Special features of this press: The operator can apply very precise pressure from 0 to 1.5 t. This is especially important, for example, when pressing in ball bearings. We have supplied this press type multiple times to the aerospace industry, where precise and careful operation is vital. Once the precise positioning is done, the hand pump allows you to build up a pressure of up to 15 t. ##### Technical Data & Information: Assembly/Disassembly Press – 15 t – 270 × 600 mm ==== General Information - Design: C-frame / manual hydraulic press - Manufacturer: DURENDUS - Press force: 0–15 t - Table size: 270 × 600 mm - Installation height: 650 / 800 mm - Table height from floor: 750 mm - Table hole: Ø 60 mm - Distance from lower recess to table: 450 mm - Overall dimensions (W×D×H): 900 × 850 × 2,300 mm - Total weight: approx. 800 kg - Frame: welded steel frame - Table: swing-out - Lower table: adjustable height (3 positions) ==== Hydraulic Cylinder - Ram stroke: 150 mm - Piston rod diameter: Ø 80 mm - Cylinder diameter: Ø 100 mm - Max. working pressure: 250 bar ==== Hydraulics & Drive - Drive: manual via hand lever and hand pump - Precision pressure control: 0–1.5 t via cross handle - Hand pump: 0.5 l Kjdpfx Ajfhcc Iebyona - Pressure display: manometer ==== Controls - Operation: manual via hand lever and cross handle - Pressure regulation: mechanically sensitive adjustment ==== Safety - Anti-twist device - Stable frame construction ##### Application areas: Pressing-in, pressing-out, assembly, disassembly, straightening, bearing technology, workshop operations, maintenance, fine assembly, service applications, small batch production Hydraulic press, hydraulic assembly press, disassembly press, workshop press, 15 t press, 15 ton press, manual hydraulic press, C-frame press, single-column press, C-press, hand press, pressing-in press, bearing press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European machinery guidelines (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply fully with the national Brazilian safety guideline NR 12, which builds upon these. Our core strength is in custom machine building and press automation. We provide bespoke hydraulic presses at surprisingly competitive prices. For the hydraulics of our presses, we mainly use components from leading European manufacturers.

Stanje: rabljeno, stiskalna sila: 30 t, številka stroja/vozila: DF0139, Hidralmac Four-Column Laboratory Press – 30 t – 1,000 × 1,000 mm – High-Speed For sale is a hydraulic four-column laboratory press manufactured by Hidralmac, with a pressing force of 30 t. This machine is ideal for laboratory applications, testing procedures, and small series production where high operational speeds and precise pressure control are required. ===== Technical Data & Information: Hydraulic Four-Column Press – 30 t ==== General Information - Manufacturer: Hidralmac - Model: Laboratory Press - Machine designation: Four-Column Press - Design: Four-Column Press - Pressing force: 30 t - Machine weight: approx. 5 t - Total power requirement: 3 kW - Space requirement (L × W × H): approx. 3,360 × 1,300 × 1,360 mm ==== Working Area - Clear passage: 1,000 × 1,000 mm - Max. distance table – ram: 1,000 mm - Stroke: 800 mm - Table height above floor: approx. 900 mm ==== Table & Ram - Column diameter: 75 mm - Cylinder diameter: 126 mm - Piston diameter: 71 mm - Return force: 3 t ==== Speeds - Approach speed: up to 200 mm/sec - Pressing speed: 0–10 mm/sec - Return speed: 200 mm/sec ==== Applications & Features - High operating speeds for efficient workflows - Precise pressure control in the low-force range Kodpsfxykhofx Abysna - Compact design for laboratory and test stands - Suitable for test series and small-batch production ===== Laboratory applications, testing technology, small-batch production, material testing, research Hydraulic press, hydraulic laboratory press, four-column press, test stand press, industrial press, testing press Looking for a hydraulic press tailored to your specific application? Contact us for an individual quotation. Our hydraulic presses are manufactured according to German machinery directives as well as European machinery guidelines (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements as they fully comply with the Brazilian safety regulation NR 12, which is based on these standards. Our core strengths are custom machine construction and press automation. We offer custom-built hydraulic presses at surprisingly affordable prices. The hydraulic components of our presses are predominantly sourced from leading European manufacturers.

Leto izdelave: 2020, stanje: skoraj kot novo (rabljeno), stiskalna sila: 150 t, Hidralmac salt press – 150 t – mineral lick block press – stainless steel contact surfaces For sale is a hydraulic mineral block or salt press from Hidralmac with a pressing force of 150 t. This machine is specifically designed for the production of salt and mineral blocks, featuring stainless steel contact surfaces for hygienic and corrosion-resistant processing. Thanks to its robust construction and optional extensions, it is suitable for continuous industrial operation. ==== Technical specifications & information: Hydraulic salt press – 150 t ==== General information - Manufacturer: Hidralmac - Model: Mineral Block Press - Machine designation: Salt Press - Type: Hydraulic production press - Pressing force: 150 t - Machine weight: approx. 8.5 t - Dimensions (L × W × H): 1,200 × 1,800 × 3,100 mm - Motor power: 10 kW - Steel quality: Structural steel LCG ASTM A36 ==== Working area - Max. working height: 1,000 mm Knsdpsdxvfiofx Abyea - Stroke: 500 mm - Table height above floor: 1,000 mm ==== Speeds - Approach speed: max. 9.9 mm/sec - Pressing speed – up to 100 t: 9.9–0 mm/sec - Return speed: 25 mm/sec ==== Hydraulics & Technology - Hydraulic tank: 500 l - Oil capacity: approx. 400 l - Column diameter: 230 mm, chrome-plated - Lubrication: manual, via grease nipples ==== Construction & features - All product-contacting parts made of stainless steel - Robust design for salt and mineral processing - High corrosion resistance - Maintenance-friendly construction ==== Options (on request) - Perimeter maintenance platform - Closed side panels (left/right/rear) - Light curtains at the front (increased speed) - Speed increase option - Siemens S7-1200 control with 12" display - Pilz safety technology ===== Salt production, mineral block manufacturing, chemical industry, compacts, series production Hydraulic press, salt press, mineral block press, production press, industrial press, press system Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they comply fully with the Brazilian national safety standard NR 12, which builds upon these standards. Our core strength is special-purpose machine construction and press automation. We offer custom hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Leto izdelave: 2020, stanje: delavnici obnovljeno (rabljeno), stiskalna sila: 400 t, številka stroja/vozila: DF0317, Hidralmac Mineral Block Press – 400 t – Salt Press – 600 mm Clearance – with Conveyor Belt For sale is a hydraulic mineral block press manufactured by Hidralmac, offering 400 tons of pressing force. This machine is specially designed for the production of salt and mineral block products and features an integrated conveyor belt for efficient material flow. Due to its robust construction and stainless steel components in product-contact areas, the press is ideally suited for continuous industrial operation. ==== Technical Data & Information: Hydraulic Mineral Block Press – 400 t ==== General Information - Manufacturer: Hidralmac - Model: Mineral Block Press - Machine Name: Salt Press - Design: Four-column press - Pressing Force: 400 t - Machine Weight: approx. 14 t - Dimensions (L × W × H): 2,380 × 1,680 × 3,580 mm - Motor Power: 36 kW ==== Working Area - Clearance Width: 600 mm - Max. Working Height: 750 mm - Stroke: 400 mm - Travel Path: 500 mm ==== Table & Construction - Column Diameter: 230 mm - Return Force: 40 t - Steel Grade: Machine construction steel LCG ASTM A36 (DIN 8651) - Product Contact Parts: Stainless steel ==== Speeds - Approach Speed: max. 10 mm/sec - Pressing Speed: 10 mm/sec - Rapid Traverse: 25 mm/sec ==== Hydraulics & Peripheral Equipment - Oil Tank: 600 l - Oil Cooling: 1.5 kW - Conveyor Belt: 6 m length ==== Control - Monitor: WEG, 12 inch ===== Salt block pressing, mineral block production, pressing processes, industrial manufacturing Knodpfxsd E Irhj Abyja Hydraulic press, mineral block press, salt press, production press, industrial press, forming press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised offer. Our hydraulic presses are manufactured according to German Machinery Directives, as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety standard NR 12, which builds upon these. Our core competency lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly competitive prices. For the hydraulic systems of our presses, we predominantly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2017, stiskalna sila: 150 t, številka stroja/vozila: DF0149, Hidralmac Concrete Pipe Press – 150 t – 2,050 × 965 mm – Double Cylinder For sale is a hydraulic concrete pipe press from manufacturer Hidralmac, offering a total pressing force of up to 150 t (2 × 75 t). This machine is specifically designed for the production and processing of concrete pipes and is distinguished by its robust construction, precise control, and high process reliability. Thanks to its heavy-duty components and well-engineered design, it is ideally suited for continuous industrial operation. Kjdpfx Abed Aftpeyena ==== Technical Data & Information: Hydraulic Concrete Pipe Press – 150 t ==== General Specifications - Manufacturer: Hidralmac - Model: Concrete Press - Machine Type: Concrete Pipe Press - Design: Double Cylinder Press - Pressing Force: 2 × 75 t / total 150 t - Machine Weight: approx. 6.5 t - Total Power Requirement: Main Motor 22 kW + Auxiliary Consumers 2 kW - Space Requirement: approx. 1,500 × 1,025 mm ==== Working Area - Pass-through Width: 2,050 × 965 mm - Window Size: approx. 2,050 × 965 mm - Max. Open Height: 1,600 mm - Stroke: 800 mm - Cylinder Travel: 350 mm ==== Table & Ram - Upper Ram: approx. 870 × 350 × 150 mm - Lower Ram: approx. 1,500 × 600 × 150 mm - Lower Ram Stroke: 150 mm - Upper Ram Stroke: 150 mm - Base Plate: 1,500 × 1,025 × 75 mm - Head Plate: 1,500 × 1,025 × 150 mm ==== Speeds - Pressing Speed: 0–15 mm/sec - Lifting Speed: 100 mm/sec ==== Hydraulics & Technology - Oil Tank: 350 l - Oil Requirement: approx. 320 l - Column Guide Diameter: 120 mm - Piston Diameter: 80 mm - Positioning Accuracy: approx. 0.5 mm (non-contact sensors) ==== Construction & Features - Heavy-duty steel structure with reinforced rams (each 150 mm) - Columns guided by bronze bushings for high stability - 72 mm thick steel base plate for tipping safety - Hydraulic unit and tank integrated in the lower section - Oil cooler mounted on the press - Control cabinet with air cooling - Removable rear interior panel for maintenance ==== Safety & Operation - Two-hand control (permanently mounted, pivot-mounted) - High-resolution light curtains - Transparent acrylic safety windows (6 mm) - LED workspace lighting ===== Concrete processing, pipe manufacturing, heavy-duty presses, series production, construction industry hydraulic press, concrete press, concrete pipe press, industrial press, production press, double cylinder press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply in all respects with the national Brazilian safety directive NR 12, which builds upon these standards. Our strength lies in special machine construction and press automation. We supply customized hydraulic presses at surprisingly competitive prices. Only components from leading European manufacturers are used in the hydraulic systems of our presses.