Helin Rk010.5B-4 nakup rabljenega (59.304)

Stanje: dober (rabljeno), Reduktorski motor, elektromotor, elektro-reduktorski motor - Število obratov: 25 min⁻¹ - Moč: 1,1 kW - Gradbena oblika: B3 kotni - Premer gredi: 32 mm Dcodpfscvtz Asx Apleg - Razred zaščite: - Količina: 1 motor na voljo - Dimenzije: 600/410/V410 mm - Teža: 97 kg

Stanje: dober (rabljeno), Gear motor, electric motor, electric geared motor, crane motor, crane drive - Manufacturer: HELIN, gear motor from Lotze HDZK swivel bending machine - Type: DKH 12,5a-4 - Speed: approx. 340 rpm - Motor: 2.2 kW / 1400 rpm - Voltage: 220/380 V - Shaft: Ø 33 x 40 mm Dodpfx Aeip Eqysplocg - Dimensions: 750/410/H295 mm - Weight: 135 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Uporabne dimenzije: 700 x 650 x 1.100 mm Serijska teža: 800 kg Temperatura: maks. 1.000 °C Ogrevanje: ogrevanje na zemeljski plin Gašenje: olje/zrak Dcedpfx Apjy H H U Uoleg Oprema: Siemens Simatic krmiljenje Na željo lahko proti doplačilu organiziramo transport in nakladanje po vsej Evropi. Cene so brez DDV Ogled je mogoč po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam z veseljem pomaga. Odkup / prodaja strojev NAKUP / PRODAJA PROIZVODNIH IN ORODJARSKIH STROJEV TER OSTALIH STROJEV. Potrebujete kakovosten, a cenovno ugoden stroj za vašo proizvodnjo? Ali pa ga želite prodati? Za več informacij ali možnosti stika nas dosežete preko kontaktnega obrazca.

Stanje: dober (rabljeno), Leto izdelave: 1973, Velikost rešetke: 700 x 650 x 1.100 mm Dcsdpfjy H H H Dex Apljg Teža na serijo: 1.000 kg Temperatura: maks. 750 °C Priključna moč: 78 kW Oprema: vključno z nadzorno enoto (potrebna zamenjava) + polnilni stroj Drugo: Peč je lahko vozna pod dušikom Na zahtevo je mogoče organizirati prevoz in nakladanje po vsej Evropi za doplačilo. Cene so brez DDV. Ogled možen po predhodnem dogovoru. Kontaktirajte nas, naše ekipa vam z veseljem pomaga. Stroji – nakup/prodaja NAKUP / PRODAJA PROIZVODNIH IN STROJEV ZA OBDELAVO KOVIN, ORODNIH STROJEV IN OSTALO. Potrebujete kakovosten, a cenovno ugoden stroj za proizvodnjo? Ali pa ga želite prodati? Za dodatne informacije ali možnosti stika nas kontaktirajte preko kontaktnega obrazca.

Stanje: rabljeno, Leto izdelave: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical system 3x400V 50/60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable height-adjustable extraction hood – motorized control - Full nominal power at approx. 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Drive: 3-phase high-frequency motor, inverter-controlled - Rotation direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Max. saw blade Ø 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools), featuring digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made of thick-walled, electro-welded box sections. The steel ribbing inside the frame ensures high stability. - Machining area H350 16.30: Travel axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm pass-through height Axis positioning speeds: Depend on the selected safety system (see layout for details). - Dual-drive gantry - X-axis guidance system: The drive for the X-axis gantry is via a rack-and-pinion with helical crowned teeth – ensuring maximum precision. The reduction gearbox provides the highest machining and repeat accuracy. Bearings are precision, encapsulated ball bearing carriages running on hardened and ground linear guides. - Y-axis guidance system: Bearings are precision, encapsulated ball bearing carriages running on hardened and ground linear guides. The Y-axis is positioned via a ground ball screw. - Z-axis guidance system: Bearings are precision, encapsulated ball bearing carriages running on hardened and ground linear guides. The Z-axis is positioned via a ground ball screw. - Automatic central lubrication system: Grease is automatically and precisely delivered to the guide carriages of the X, Y, and Z axes as well as to the ball screws of Y and Z. Lubrication cycle is performed automatically after a defined interval. - 12-position linear tool changer on the left of the machine frame including a pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and provides sufficient space for milling tools. One aggregate station (configuration options, see layout). Max. tool diameter: 250 mm Max. tool length: 240 mm Dcsdpfxjy Ih Rgj Aplsg - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in X-direction and 5 spindles in Y-direction. Horizontal 6 spindles: 4 spindles in X-direction and 2 spindles in Y-direction. Stroke = 70 mm Max. drill bit length = 70 mm, shank diameter = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – X-direction Max. saw blade diameter: 120 mm Max. bla...

Stanje: rabljeno, Leto izdelave: 2016, Delovno polje: X=3300 mm Y=1280 mm Z=150 mm Višina prehoda Upravljalni terminal: 24" barvni LED zaslon Ročni terminal za upravljanje hitrosti osi Programska oprema: "Woodflash" Vakuumska črpalka 90 m³/h/50 Hz oziroma 108 m³/h/60 Hz Rezkalno vreteno 12 kW HSK F63 (12.000 vrt./min) 12-pozicijski linearni menjalec orodja na levi strani stroja + pick-up prostor Vrtalna glava DH 16 4H 2S: 12 navpičnih vreten 4 vodoravna vretena 2 utorni žagi Lokacija skladišča: Nattheim Dcodexy Tlwepfx Apleg

Stanje: zelo dobro (rabljeno), Profesionalni knjižarski vrtalnik priznane nemške družbe Constantin Hang Maschinenfabrik Göppingen. Model 114-4 je opremljen s 4 vrtalnimi glavami, namenjenimi za natančno vrtanje papirja, dokumentacije, katalogov, koledarjev in drugih tiskarskih materialov. Stroj se uporablja v: • tiskarnah, • knjigoveznicah, • grafičnih delavnicah, • proizvodnji registratorjev in katalogov, • pripravi tehnične dokumentacije. Trdna nemška konstrukcija zagotavlja visoko natančnost delovanja in dolgo življenjsko dobo. Tehnični podatki: • Proizvajalec: Constantin Hang Maschinenfabrik • Model: 114-4 Dcjdpfxsy Nm A Rj Apljg • Število glav: 4 • Nastavljiv razmak glav • Nastavljiva delovna miza • Noga za upravljanje – pedal • Zaščitni pokrov • Proizvedeno v Nemčiji

Stanje: rabljeno, Leto izdelave: 2014, Použit stroj Leto izdelave: 2014 Oprema in tehnični podatki: - Delovno območje X: 3.740 mm - Delovno območje Y: 1.570 mm - Delovno območje Z: 350 mm - 4. os: prisotna - 5. os: 5-osno vreteno, motor 12 kW - z dodatno blokado C-osi - Mesta za menjavo orodja: 24 s ploščnim menjalcem; 10 na levi strani stroja - Vertikalna vrtalna vretena: 12 - Strojna miza: konzolna miza - Avtomatika pozicioniranja mize: prisotna Djdpsx Hllxofx Aplscg - 6 delovnih podpor tipa e-motion - Poseben sistem vpenjanja za okvirje - Programska oprema: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 delovni polji za nihajno obdelavo - z avtomatskim centralnim mazalnim sistemom - z mobilnim upravljalnim pultom in PC monitorjem - s klimatsko napravo za elektro omaro - z vakuumsko črpalko 90 m³/h - z ročnim upravljalnikom - Vključeno: 12 vpenjal za okvirje, 8 velikih in 4 srednje vakuumske priseske Razpoložljivost: takoj Lokacija: Röllbach

Stanje: zelo dobro (rabljeno), Beading Machine / Sheet Metal Edge Forming Machine by renowned German manufacturer Weberwerke Siegen. The machine is designed for edging, hemming, and beading (creating ribs) on sheet metal edges. Its robust and heavy cast iron construction ensures stable and precise operation. The open C-frame allows for processing large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for forming sheet metal. The pressure and roller guidance are mechanically adjustable. Nameplate data: • Model: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² Dsdpfjyga T Njx Apljcg This machine is not a shear – it does not cut sheet metal; it is exclusively for shaping it. Used condition, complete, with visible signs of use consistent with its age. Ideal for locksmith shops, tool rooms, maintenance departments, as well as restoration work and one-off or small-batch production.

Stanje: zelo dobro (rabljeno), Naprodaj CNC vrtljiva miza priznane znamke Fadal Engineering (ZDA), model VH65. Profesionalna 4. os, namenjena obdelovalnim centrom, predvsem Fadal VMC, možna pa je tudi integracija z drugimi CNC stroji z ustreznim krmilnikom. Tehnični podatki: • Model: VH65 • Premer plošče: 165 mm (6,5”) • Prenos: 90:1 • Pnevmatska zavora (M60 VKLOP / M61 IZKLOP) • Industrijski več-pinski konektor • Serijska številka: 4630298. Stanje: rabljeno, mehansko brezhibno, običajni znaki uporabe. Trdna in težka konstrukcija – idealno za natančno 4-osno obdelavo. Dodpfjw R St Nex Aplscg

Stanje: zelo dobro (rabljeno), Na prodaj profesionalna CNC vrtljiva miza priznanega proizvajalca Fadal Engineering (ZDA, hčerinska družba Giddings & Lewis Inc.), model VH65. Opremljena s stružnim vpenjalom Röhm ZG Ø125 mm, kar bistveno poveča vsestranskost uporabe. Tehnične specifikacije: • Model: VH65 • Premer plošče: 165 mm (6,5”) • Prenos: 90:1 • Pnevmatska zavora (M60 VKLOP / M61 IZKLOP) • Stružno vpenjalo Röhm ZG Ø125 mm – maks. 4000 vrt/min, moment 80 Nm • Serijska številka: 6660297 • Industrijski večpin priključek Stanje: rabljeno, mehansko popolnoma delujoče, običajni znaki uporabe. Masivna, težka konstrukcija – jamstvo za natančnost in dolgo življenjsko dobo. Pripravljena za uporabo kot dodatna 4. os v obdelovalnem centru. Dodjw R Syiepfx Apljcg

Stanje: zelo dobro (rabljeno), A robust industrial machine of German manufacture: Walther Trowal, model DLT 4, year 1980. The device is designed for surface finishing of metal, aluminum, or plastic components, using the vibratory finishing process (deburring, edge rounding, polishing, cleaning). Classic rotary drum construction – reliable, heavy-duty, and durable, typical of "West Germany" manufacturing. Dcodjxmlinepfx Apleg Technical specifications: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Rotational speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Machine is complete, drum rotates freely and smoothly. • Perforation and interior are in good condition. • No signs of cracks or structural damage. • Electrical connection and possible inspection required. • Ideal for a tool shop, metal finishing plant, or production line. Applications: • Deburring and cleaning of components after machining. • Polishing of metal or aluminum parts. • Finishing of bolts, bushings, stamped components, castings, and precision parts. Condition: used, robust, classic Walther Trowal design – suitable for light refurbishment or ready for immediate use.

Stanje: zelo dobro (rabljeno), Na prodaj industrijska črpalka priznane znamke Grundfos. Model SPK 4-8 – vertikalna večstopenjska črpalka, namenjena za čiste tekočine, hladilne tekočine, industrijske instalacije ter CNC stroje. Tehnični podatki: Proizvajalec: Grundfos Model: SPK 4-8 A-A-A Moč: 0,55 kW Vrtljaji: 2850 obr/min Pretok: cca 3 m³/h Dvižna višina: do 28 m Dcjdeywpahepfx Aplog Temperatura tekočine: max. 90°C Država proizvodnje: Danska Stanje: Rabljeno, delujoče. Vidni znaki uporabe (praskice, manjše sledi korozije – glej slike). Vidna razpoka na ohišju pri priključku – ne vpliva na delovanje (priporočamo preverbo s strani kupca).

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, moč: 2 kW (2,72 KM), širina odprtine za polnjenje: 1.250 mm, dolžina polnilne odprtine: 1.000 mm, skupna masa: 1.300 kg, Tehnični podatki: Odprtina lijaka: dolžina x širina 1250x1000 mm Dolžina x širina: 1250 x 1000 mm Odprtina rezalne enote: 562 x 462 mm Dovodna odprtina: 1250 x 1000 mm Dcjdpfx Apsyma Tijlsg Dolžina x širina: 562x462 mm Število gredi: 4 kosi od tega: rezalni gredi: 2 kosa čistilni gredi: 2 kosa Število rezalnih diskov: 23 Število obratov gredi: 25 min⁻¹.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: NR: 220.10.029.19, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 28 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, Oprema: CE označba, dokumentacija / priročnik, Naprodaj visokokakovostni robni lepilni stroj Format4 Tempora 60.06 EL – takoj pripravljen za delo! Dvignite svojo proizvodnjo na višjo raven s tem malo rabljenim robnim lepilnim strojem Format4 Tempora 60.06 EL v odličnem stanju. Stroj je zasnovan za industrijsko uporabo in zagotavlja izjemno natančnost ter popolno površino vsake plošče. - Visokonatančno avtomatsko lepljenje robov - Enota za predrezkanje za popolno pripravo roba - Zanesljiv in konstanten sistem lepljenja - Popolna obdelava: porezovanje, rezkanje, poliranje - Enostavno upravljanje in zanesljivo delovanje Vključene dodatne opreme: - Rdeč zračni rezervoar (kot je prikazano na fotografijah) Dcodpfx Aoy Dg N Tsplog - Dodatni ogrevani posoda za lepilo – idealna za hitro menjavo različnih barv lepila Stroj je skrbno vzdrževan, zelo malo rabljen in popolnoma operativen – pripravljen za neposredno uporabo v proizvodnji. Stroj je na voljo zaradi reorganizacije obrata. Za več podrobnosti ali ogled nas kontaktirajte.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Dcjdpfx Ajd Tbbdeplog - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Dcsdofdkb Tepfx Aplsg Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards Dsdpfx Apjd Tqaljlscg - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth Dcodpsfdkb Ujfx Apljg - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Dcodpfjguk A Hex Aplog Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Dcodpfx Apofdkbhslog Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Dodpfxeguk Dkj Aplecg - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) Dcsdpfoguk Dvjx Aplsg - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995,

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost: 9.150 kg, nosilnost na odsek shranjevanja: 3.050 kg, skupna dolžina: 22.800 mm, skupna višina: 3.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 22.800 mm, 4 dvopolna paletna regala (M35112711-3) vsak 5,7 m dolg, 3,5 m visok, 1,1 m globok, vsak s 2 polji, širokimi 2,7 m, vsak s 3 nivoji prečk, nosilnost na polje 3000 kg. - 12 okvirjev (RM3511 - RAL5019) - 24 talnih plošč, podlag, pritrdilni material - 48 talnih sider (ZZBA1210) - 48 posameznih prečk (T2711 - RAL2008) - 4 oznake nosilnosti (BSMcP) Okvirji so vijačeni, ne predmontirani Dodpfx Ajyz Iccsplscg Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - brezplačna dostava na gradbišče / mesto montaže - razklad tovornjaka izvaja kupec z lastno dvižno opremo - dobave po celotni Nemčiji, razen otokov! Dobave v EU države po individualnem dogovoru.