Hans Schoen Ute Ff 300 nakup rabljenega (19.421)

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Pressure: 300 tons Distance between uprights: 1800 mm Side passages: Yes Installation height: 1000 mm Table: 1800 x 1000 mm Nsdpfx Asgbvkveltjwi Ram: 1800 x 1000 mm Stroke: 600 mm Weight: 43 tons Height: 4700 mm Siemens S7 control system Floor-level installation Sick light curtain Draw cushion: Stroke 200 mm

Stanje: dober (rabljeno), Leto izdelave: 2000, širina mize: 1.000 mm, dolžina mize: 1.800 mm, širina plošče bata: 600 mm, skupna dolžina: 25.000 mm, skupna širina: 27.000 mm, skupna višina: 47.000 mm, skupna masa: 43.000 kg, hod blazine orodja: 200 mm, Siemens Simatic OP 27 control system Sick light barrier Separate Rittal control cabinet Side walkways/access passages Floor-level installation Nwjdpjtiwgisfx Altji

Leto izdelave: 1977, stanje: pripravljen za uporabo (rabljen), Na voljo je hidravlična univerzalna stiskalnica. Tlačna sila: 75t, hod: 250mm, površina mize X/Y: pribl. 600mm/500mm, varnostna razdalja: 107mm, zavorna pot: 18mm. Oprema: ročno nastavljiva omejitev hoda (zgoraj/spodaj), integriran izmetalec z upravljanjem vlečne blazine, analogni prikaz tlaka do 400 barov. Varnostna oprema: SICK varnostna svetlobna zavesa za delovno območje. Skupna teža: pribl. 3500kg, skupne mere X/Y/Z: pribl. 1300mm/1800mm/2900mm. Ogled možen po dogovoru. Njdpfey S A Nfex Altswi

Leto izdelave: 1989, stanje: pripravljen za uporabo (rabljen), Pressing force: 300 kN, motor power: 37 kW, with hydraulic feed and protective enclosure. Nwsdpfxelmmwre Altei

Stanje: potreben popravila (rabljeno), Leto izdelave: 1972, številka stroja/vozila: 611, Funkcionalnost: omejena funkcionalnost, stiskalna sila: 100 t, Prodaja se hidravlična stiskalnica Hans Schön s kapaciteto 100 ton. Zadnjič je bila v uporabi pred približno 7 leti. Takrat je imel stroj težave s hidravličnim ventilom. To ni bilo popravljeno, ker stiskalnice niso več potrebovali. Sicer je stroj do zadnje uporabe deloval brezhibno. Stiskalnica nima UVV certifikata! Nwodpfx Alex Ehlcstoi

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, moč: 3 kW (4,08 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, stiskalna sila: 16 t, hod: 100 mm, širina mize: 440 mm, dolžina mize: 320 mm, razmak između stupova: 500 mm, kapaciteta rezervoarja za olje: 60 l, skupna dolžina: 1.040 mm, skupna širina: 1.030 mm, skupna višina: 2.000 mm, 16-tonska hidravlična stiskalnica v dobrem stanju na prodaj. HANS SCHOEN TES 16 dvostebrna hidravlična stiskalnica Nedpfx Aljzf Ilcjtewi Leto izdelave: 1986 Tlačna sila: 160 kN Moč motorja: 3 kW, 380 V, 50 Hz Dvoročno upravljanje Višina postavitve: 280 mm Hod: 100 mm Širina mize: 440 mm Globina mize: 320 mm Mere stroja: Višina: 200 cm Širina: 103 cm Dolžina: 104 cm Teža: 1000 kg.

Stanje: rabljeno, Leto izdelave: 1982, Technical details: Pressure: 16 t Stroke: 250 mm Throat depth: 270 mm Installation height: approx. 400 mm Table area: 800 x 500 mm Bore diameter: Ø 50 mm Ram surface: 220 x 360 mm Pin hole in ram: Ø 40 mm Table height above floor: 970 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V / 50 Hz Total power requirement: 3.0 kW Machine weight approx.: 2.3 t Machine dimensions approx. LxWxH: 1.8 x 1.5 x 2.72 m High-speed hydraulic press Robust welded frame construction. Mode selection via selector switch: inching, two-hand, foot or continuous operation with feed Press is equipped with a side-mounted piece counter EMERGENCY STOP switch With stroke limiter Press force adjustment possible With overload protection (pressure relief valve) With shock-absorbing system Nodpfxou Nfmys Altewi Light curtain SICK optical electronics prepared (can be reactivated as an option)

Stanje: dober (rabljeno), Leto izdelave: 1982, Pritisna sila: maks. 200 kN Varnostna razdalja: 100 mm Dodatni pomik: maks. 10 mm Moč motorja: 3 kW vključno z dodatno opremo Na zahtevo lahko organiziramo transport in nakladanje po vsej Evropi za doplačilo. Cene so brez DDV Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam z veseljem pomaga. Nwjdpfx Aley H Ibvetoi Odkup in prodaja strojev NAKUP / PRODAJA PROIZVODNIH IN KOVINSKOOBDELOVALNIH STROJEV, ORODJARSKIH STROJEV IN OSTALO. Potrebujete kakovosten, a ugoden stroj za svojo proizvodnjo? Ali pa ga želite prodati? Za dodatne informacije ali kontaktne možnosti nas kontaktirajte preko kontaktnega obrazca.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1979, številka stroja/vozila: 2386, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 25 t, hod: 100 mm, širina mize: 440 mm, dolžina mize: 320 mm, vgradna višina: 280 mm, hydraulically overhauled SCHOEN double-column press TES 25 Year of manufacture: 1979/2025 Pressing force: 250 kN Nedpfevw Spmox Altowi Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Table depth: 320 mm The machine will be fully overhauled: - new control system - new light barriers - hydraulics reconditioned

Stanje: potreben popravila (rabljeno), Leto izdelave: 1980, Funkcionalnost: omejena funkcionalnost, Prodaja se hidravlična stiskalnica Hans Schön z močjo 650 kN. Nazadnje je bila v uporabi pred približno 8 leti. Takrat je imela naprava težave s hidravlično cevjo (morda iztekanje hidravličnega olja ali netesno spojko). Težava ni bila odpravljena, saj stiskalnice niso več potrebovali. Sicer je stroj do takrat deloval brezhibno. Stiskalnica nima UVV pregleda! Nwodpfox Ehmyjx Altei

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, Hans Schoen NH/LF 200 (UVV) – Powerful & Robust 🔧 Model: Hans Schoen NH/LF 200 📍 Type: Hydraulic Double-Column Press (UVV-certified) 📅 Year of manufacture: approx. 1988 (depending on machine) 📦 Condition: Used, fully functional ⸻ 💪 Technical Highlights • Pressing force: approx. 200 t – suitable for demanding forming and drawing operations • Hydraulic drive for precise force and stroke control • Column clearance: approx. 1,050 mm – ample working space • Stroke: approx. 150 mm – efficient stroke length • Table surface: approx. 1,000 × 1,200 mm – large clamping area • Table height above floor: approx. 850 mm – ergonomic working height • Hydraulic control (usually with PLC/Siemens control) possible • Safety and UVV-approval for hand insertion operations – increased workplace safety 💡 Thanks to its robust construction, this press is ideal for series production, drawing and forming processes, as well as machining and assembly tasks in metalworking shops. Njdpfox Ry Nyjx Altjwi ⸻ 📌 Features & Equipment • Two-hand operation / safety control • Adjustable fixed stop • Pressure shut-off • Pressure switch • UVV-compliant safety features → Everything for efficient and safe shop floor operation Currently has valid UVV inspection. ⸻ 🛠️ Areas of Application This press offers a wide range of uses, for example: • Metal forming / drawing operations • Production of assembly and joining components • Testing and quality assurance processes • Mass production and small batch manufacturing ⸻ 📦 Size & Weight • Dimensions (approx.): Width × Depth × Height ≈ 4.0 × 3.6 × 3.4 m • Weight: approx. 16 t – solid industrial construction

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, moč: 37 kW (50,31 KM), stiskalna sila: 250 t, hod: 150 mm, širina mize: 900 mm, dolžina mize: 1.000 mm, skupna masa: 16.000 kg, Very nice and well-maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm W: 200 cm L: 200 cm Weight: 16,000 kg. Can be loaded by crane upon collection and payment. Nwsdpery Trpsfx Altei Transport can be arranged. Sold on behalf of customer. Location: DK-7600 Struer. Please schedule an appointment for a viewing.

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 20 t, hod: 150 mm, širina mize: 800 mm, dolžina mize: 500 mm, vgradna višina: 400 mm, hydraulic double-column press, manufacturer Schoen UTE/B20, year of manufacture 2000, used Njdpfxjt Dzpfe Altewi Control system: Siemens S7 Pressing force: 200 kN Installation height: 400 mm Stroke: 150 mm Table width: 800 mm Table depth: 500 mm

Leto izdelave: 1977, stanje: rabljeno, Pressing force 200 t Upright distance 500 mm Stroke 150 mm Ram area 320 mm Table area 470x400 mm Machine weight approx. 12 t Space requirement approx. 2000x2000x2700 mm Nodpfx Aelp Uz Ueltjwi Sick BWS for guard and cycle operation Two-hand operation Mechanical fixed stop Pressure switch Pressure holding time Rapid working stroke Approved for manual loading operations

Leto izdelave: 1976, stanje: rabljeno, Pressure 250 t Nedpolp U A Sjfx Altewi Upright gap 900 mm Stroke 300 mm Table size 850x900 mm Ram size 800x880 mm Stroke 300 mm Table height 1050 mm Machine number: 1554 Drawing cushion (150 mm stroke) Sick BWS for safety and automatic mode Mechanical depth stop Raziol strip lubrication system

Leto izdelave: 1976, stanje: rabljeno, Pressure: 100 t Frame width: 625 mm Stroke: 150 mm Table surface: 580x450 mm Ram surface: 580x340 mm Pass-through opening in table Ø 150 mm Table height: 850 mm Ram bore Ø 45 mm Side frame opening: 200x200 mm Machine weight approx. 6.0 t Space requirement (WxDxH): approx. 1300x1300x2750 mm Fixed stop adjustment Pressure and stroke limitation Two-hand operation Rapid/working stroke Rollbloc strips in the table Njdpfxjlp U Eus Altjwi Approved for manual loading operations

Stanje: rabljeno, Leto izdelave: 2013, številka stroja/vozila: IntNr231584, Na prodajo je robusten CNC poševnoležiščni stružni center ACCUWAY UT-300, letnik 2013, vključno z avtomatskim podajalcem palic FEDEK DH-65L. Tehnični podatki Krmilje: FANUC 0i-TC Število osi: 2 osi, X/Z Pomik X-osi: 300 mm Pomik Z-osi: 750 mm Hitri pomik X-osi: 20 m/min Hitri pomik Z-osi: 24 m/min Hitrost vretena: do 3.500 obr/min Prehod za palico: 75 mm Moč glavnega motorja: pribl. 15 / 18,5 kW Revolver za orodja: 12 postaj Konjiček Teža stroja: pribl. 5.500 kg Dimenzije stroja: pribl. 3.300 × 1.800 × 1.800 mm Nodszp If Rjpfx Altewi Podajalnik palic FEDEK DH-65L: Dolžina palice: pribl. 1.500 mm Premer palice: pribl. 5–65 mm Vmesnik: vključen vmesnik za podajalnik palic Stroj si je možno ogledati po predhodnem dogovoru. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje.

Stanje: dober (rabljeno), Leto izdelave: 1994, Arburg Thermonic Regulator temperature (model SI FF 10 G250/300) Naprava ima analogni rotacijski gumb za nastavitev želene temperature v stopinjah Celzija in Fahrenheita (območje od 50 °C do 450 °C) ter tri LED-zaslone za nadzor odstopanja temperature. Nsdjzl Sbnopfx Altjwi

Stanje: pripravljen za uporabo (rabljen), Na voljo je stroj za pakiranje s plosko folijo AVT, vključno z kotnim transportnim trakom. Tip folije: PE/PP, širina folije: 120mm-600mm, debelina folije: 40µm-200µm, dimenzije stroja X/Y: ca. 1400mm/1400mm, teža: ca. 250kg, upravljanje: Siemens. Dokumentacija je na voljo. Ogled na lokaciji je možen. Nwjdpfx Aloxf Iihstsi

Stanje: rabljeno, Leto izdelave: 2000, Širina skobljanja: 410 mm Vhodna miza: 1620 mm Izhodna miza: 1170 mm Skupna dolžina: 2850 mm Elektromotorni pomik poravnalne mize z digitalnim prikazom Naklonljiv omejevalnik s pomožnim omejevalnikom Motor: 4 kW Hitrost vrtenja: 5000 1/min. Potreben prostor: 2950 x 1260 mm Teža: ca. 850 kg Lokacija skladišča: pri dobavitelju Nsdpfx Alszb N Tzstowi

Stanje: rabljeno, Leto izdelave: 1979, Wheel diameter - max. 350 mm Wheel width 350 mm Module - max. 8 Module - min. Total power requirement 7.5 - 22 kW Njdpot Hwxzsfx Altswi Machine weight approx. t Space requirement approx. m Gear hobbing machine with slotting device, 2-cut, broaching slotting device, without hydraulic unit

Leto izdelave: 2017, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Universally applicable bridge-type traveling head cutting press with lift table. Model: 5300A Designed for manual die-cutting of sheet and roll materials. The machine configuration includes the following components: • Machine type 5300A / 1600 x 800 / 800 kN • Knife holder rails mounted on the bridge for consistent sheet width • Cutting pad, plastic, type HY 78 Additional equipment: Njdpfeyly R Eox Altewi • Automatic moving beam/ram device • Motorized unwinding unit for roll material feed • Material hold-down device installed at the table entry, for securing roll materials during cutting • Laser material positioning system with 4 cross lasers • 1 spare cross laser Automatic moving beam/ram device Material hold-down device installed at the table entry for securing roll materials during cutting Motorized unwinding unit for feeding roll materials Laser material positioning system with 4 cross lasers and 1 spare laser Machine data: Cutting force: 800 kN Table size: 1600 x 800 mm Table height (approx.): 1000 mm Clearance height (max.): 190 mm Stroke, adjustable: 15 – 165 mm Stop adjustment: 40 mm Safety light curtain height: 750 mm Machine weight (approx.): 5100 kg Hydraulics and drives: Bridge movement power requirement: 1.5 kW Bridge movement time (approx.): 2 seconds Closing speed: approx. 90 mm/s Cutting speed: 33 / 5.5 mm/s Return speed: approx. 52 mm/s Hydraulic motor power: 4 kW Oil requirement: 200 l (ISO VG 46) (The required oil quantity is not included in the delivery.) Plastic cutting pad: Quality: HY 78 natural Shore hardness (D): 78 Dimensions: 1600 x 800 mm Pad thickness: 10 mm Material: Polypropylene

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Raddurchmesser - max. 450 mm Modul - max. 4 mm Innendurchmesser min. 100 mm Innendurchmesser max. 300 mm Größter zulässiger Schälrad-Durchmesser 175 mm Durchmesser der Anlagefläche 125 mm Schlittenweg X-Richtung 350 mm Schlittenweg Y-Richtung 300 mm Schlittenweg Z-Richtung 440 mm Größter Schälkopfschwenkkreis ±25 Grad Werkstücktisch-Außendurchmesser 570 mm Werkstücktisch - Größte zulässige Belastung 5 kN Vorschub - X 12000 mm/min Vorschub - Y 5000 mm/min Nedpfxezfqiko Altewi Vorschub - Z 8570 mm/min Drehzahl Werkzeug 0-3000 U/min Drehzahl Werkstücktisch 0-1500 U/min Betriebsspannung 400 V Maschinengewicht ca. 11 t Raumbedarf ca. 5,85 x 8,3 x 3,8 m Technische Daten: - CNC Siemens 840 D sl - Schlittenweg Schwenkgreifer: 180 Grad Betriebsstoffe: - Hydraulik: 150 l - Kühlschmierung: 850 l - Motoren- und Hydraulikkühlung: 100 l - Fettschmierung: 2 kg

Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months --- Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continual development, and expertise + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Nedpfx Alschqxxstswi The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette. Advantages of briquette production include: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable sale -- Briquetting Press NEM 300 Throughput approx. up to 200 kg per hour (highly depending on material). - In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion. - In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion. Technical specifications: Motor: 7.5 kW (+ 0.55 kW on the cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Optimal briquette stroke: 80 mm Pump: 80 liters Storage hopper approx. 0.5 m³ capacity (extendable)

Stanje: dober (rabljeno), Leto izdelave: 1998, Max. pitch circle diameter external gearing: 300 mm Max. pitch circle diameter internal gearing: 300 mm Max. outside diameter of workpiece (fixture): 450 mm Module - max.: 6 Max. gear width: 100 mm Max. helix angle (with tool Ø 125 mm): +/- 45° Stroke rate - infinitely variable: 130 - 1300 strokes/min Workpiece weight: 1000 kg Minimum distance table surface - tool spindle: -55 / +300 mm Maximum distance table surface - tool spindle: 200 mm Maximal distance table surface - tool spindle: 350 mm Manual column lateral displacement: +/- 25 mm Manual swivel angle of the tool spindle: +/- 0.5° Max. tool speed: 15 rpm Max. workpiece speed: 27 rpm Max. tool diameter: 7 in Voltage: 400 V Frequency: 50 Hz Max. mains current: 70 A Total power requirement: 48 kW Machine weight approx.: 11 t Nodpfx Aljvu E Nustowi Space requirements approx.: 4.27 x 3.11 x 2.87 m Main spindle taper: SK 45 Table bore: 40 mm Control: Siemens Sinumerik 840 C Gear shaping machine: Gleason PFAUTER Mod. PSA 300 CNC modular gear cutting machine with shaping cutter for the machining of external and internal cylindrical gears, with straight or helical involute gearing as well as any other profile achievable via generating or form shaping processes. The machining cycle is controlled by a CNC unit, equipped with dedicated gear cutting software. Application scope --> The PSA 300 is designed for manufacturing: - Gears with straight external toothing - Gears with straight internal toothing - Gears with external helical gearing - Gears with internal helical gearing