Greiner Thermorunner 4 nakup rabljenega (59.192)

Stanje: dober (rabljeno), Leto izdelave: 2001, Greiner Thermorunner 4 za polipropilen (PP) in polistiren (PS). Vključuje grelno postajo, oblikovalno postajo in hladilni sistem. * Tlačna sila: 180.000 N * Hitrost proizvodnje: maks. 45 ciklov/min * Minimalna širina pločevine: 150 mm * Maksimalna širina pločevine: 560 mm * Minimalna debelina pločevine: 0,3 mm * Maksimalna debelina pločevine: 2,5 mm Bdjdpen Utzfjfx Agtob Ta termoformirna linija je že demontirana in pripravljena za transport (lokacija: Waalwijk, Nizozemska)

Stanje: dober (rabljeno), Valjasti čelni rezkar, valjasti rezkar, rezkar, nasadni rezkar, rezkarska glava, kotni rezkar, nasadni kotni rezkar, kotni čelni rezkar Bdedpfoy A Ew Tox Agteb -Proizvajalec: Greiner, kotni čelni in valjasti čelni rezkar, 2 kosa -Tip: W242 Ø60x16xØ22 / Ø48x16xØ22 -Vpenjanje: Ø 22 mm -Cena/dobava: komplet -Transportne mere: 110/60/V30 mm -Teža: 0,5 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, obratovalne ure: 39.000 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, A used and fully functional profile production line for rigid PVC profiles, consisting of the following components: Twin-screw extruder (parallel) Manufacturer: WEBER Model: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 h Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, infinitely variable Drive motor: DC low-voltage motor, thyristor-controlled Drive capacity: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fans) Adapter heating zone: 1 Tool heating zones: 5 Control system: conventional with digital temperature controllers Degassing: rotary vane vacuum pump, Busch (1.5 kW) Max. output: 120–150 kg/h for rigid PVC, depending on material Connected load: approx. 50 kW (without tooling) Special accessories: melt temperature sensor, melt pressure sensor Adapter between extruder connection and extrusion tooling Used tooling set for a window profile (profile extension), consisting of: - Extrusion die for profile extension, incl. heating bands - Dry calibration unit - Vacuum tank approx. 2 m long, with 8 inserts for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Model: CAL VAK 4P Year of manufacture: 1992 Machine no.: K9209590 Total length: 6500 mm Vacuum pumps: 4 units Speck vacuum pumps (each 4.3 kW) Water circulation pumps: 2 units Calpeda (each 1.1 kW) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Model: CAT PUL 2D Year of manufacture: 1992 Machine no.: R 9204546 Haul-off: Effective contact length: 2000 mm Bsdsyx Dwkopfx Agtjdb Pad width: 250 mm Max. pulling force: approx. 25,000 N Speed range: max. approx. 10 m/min Profile saw: TCT circular saw blade: Ø 450 mm Max. profile cross-section: approx. 300 x 100 mm Tipping table Manufacturer: Ide Model: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The entire line was overhauled in 2020 and has only been in operation for 325 hours since then.

Stanje: rabljeno, Leto izdelave: 2016, Used machine Year of manufacture: 2016 Features and technical data: - Electrical system: 3x400V 50/60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely adjustable extraction hood – motorized control - Full rated power available at approx. 12,000 rpm - Speed range: 1,000 – 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotation direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Max. saw blade diameter: 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tooling) with digital drives (double-sided drive). The machine frame of the Profit H350 16.30 is made from thick-walled, electro-welded box-section steel. Internal ribbing ensures high rigidity. - Working area H350 16.30: Axis travel: X = 4,000 mm Y = 1,970 mm Z = 455 mm Working envelope: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (see layout). - Double-sided driven gantry portal - X-axis guide system: The portal drive for the X-axis is via a helical, crowned rack and pinion – this ensures maximum precision. The reduction gear guarantees excellent machining quality and repeat accuracy. The bearing arrangement uses encapsulated recirculating ball carriages running on hardened and ground linear guides. - Y-axis guide system: The bearing arrangement uses encapsulated recirculating ball carriages running on hardened and ground linear guides. The Y-axis is positioned via a ground recirculating ball screw. - Z-axis guide system: The bearing arrangement uses encapsulated recirculating ball carriages running on hardened and ground linear guides. The Z-axis is positioned via a ground recirculating ball screw. - Automatic central lubrication: Bdsdpey Ih Rgsfx Agtob Lubricant is precisely delivered to the guide carriages of the X, Y, and Z axes as well as to the recirculating ball screws in Y and Z. Lubrication is carried out automatically at set intervals. - 12-position linear tool changer mounted on the left side of the machine frame, including one pickup station for aggregates: The 12-position linear changer ensures minimum tool changing times and ample storage for milling tools. One aggregate station (see layout for possible configurations) Max. tool diameter: 250 mm Max. tool length: 240 mm - Drilling head DH 18 6H 1S: Vertical: 12 spindles (7 in X-direction, 5 in Y-direction) Horizontal: 6 spindles (4 in X-direction, 2 in Y-direction) Stroke = 70 mm Max. drill bit length = 70 mm, shank diameter = 10 mm All spindles individually driven and selectable 1 slot saw in X-direction Max. saw blade diameter 120 mm

Stanje: rabljeno, Leto izdelave: 2016, Delovno polje: X=3300 mm Y=1280 mm Z=150 mm Višina prehoda Upravljalni terminal: 24" barvni LED zaslon Ročni terminal za upravljanje hitrosti osi Programska oprema: "Woodflash" Vakuumska črpalka 90 m³/h/50 Hz oziroma 108 m³/h/60 Hz Rezkalno vreteno 12 kW HSK F63 (12.000 vrt./min) 12-pozicijski linearni menjalec orodja na levi strani stroja + pick-up prostor Vrtalna glava DH 16 4H 2S: 12 navpičnih vreten 4 vodoravna vretena 2 utorni žagi Lokacija skladišča: Nattheim Bjdexy Tlwopfx Agtedb

Stanje: rabljeno, Leto izdelave: 2014, Použit stroj Leto izdelave: 2014 Oprema in tehnični podatki: - Delovno območje X: 3.740 mm - Delovno območje Y: 1.570 mm - Delovno območje Z: 350 mm Bodpfox Hllxex Agtodb - 4. os: prisotna - 5. os: 5-osno vreteno, motor 12 kW - z dodatno blokado C-osi - Mesta za menjavo orodja: 24 s ploščnim menjalcem; 10 na levi strani stroja - Vertikalna vrtalna vretena: 12 - Strojna miza: konzolna miza - Avtomatika pozicioniranja mize: prisotna - 6 delovnih podpor tipa e-motion - Poseben sistem vpenjanja za okvirje - Programska oprema: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 delovni polji za nihajno obdelavo - z avtomatskim centralnim mazalnim sistemom - z mobilnim upravljalnim pultom in PC monitorjem - s klimatsko napravo za elektro omaro - z vakuumsko črpalko 90 m³/h - z ročnim upravljalnikom - Vključeno: 12 vpenjal za okvirje, 8 velikih in 4 srednje vakuumske priseske Razpoložljivost: takoj Lokacija: Röllbach

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 00020, Zračni tlak: najmanj 6 bar Največja velikost koša za zlaganje je 530x300 mm Bdedpfjupi Aqsx Agtjb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: NR: 220.10.029.19, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 28 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, Oprema: CE označba, dokumentacija / priročnik, Naprodaj visokokakovostni robni lepilni stroj Format4 Tempora 60.06 EL – takoj pripravljen za delo! Dvignite svojo proizvodnjo na višjo raven s tem malo rabljenim robnim lepilnim strojem Format4 Tempora 60.06 EL v odličnem stanju. Stroj je zasnovan za industrijsko uporabo in zagotavlja izjemno natančnost ter popolno površino vsake plošče. - Visokonatančno avtomatsko lepljenje robov - Enota za predrezkanje za popolno pripravo roba - Zanesljiv in konstanten sistem lepljenja - Popolna obdelava: porezovanje, rezkanje, poliranje - Enostavno upravljanje in zanesljivo delovanje Bdodpfoy Dg N Tjx Agtob Vključene dodatne opreme: - Rdeč zračni rezervoar (kot je prikazano na fotografijah) - Dodatni ogrevani posoda za lepilo – idealna za hitro menjavo različnih barv lepila Stroj je skrbno vzdrževan, zelo malo rabljen in popolnoma operativen – pripravljen za neposredno uporabo v proizvodnji. Stroj je na voljo zaradi reorganizacije obrata. Za več podrobnosti ali ogled nas kontaktirajte.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard Bsdpfxefdkb Te Agtsdb - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany Bedpfxsd Tbbdj Agtedb - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Bdjdpfxod Tqale Agtsb Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) Bjdjfdkb Uopfx Agtodb - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: Bedpfoguk A Hex Agtodb - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times Bdsdpeguk Dkofx Agtjb - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Bsdpfxjfdkbho Agtjdb The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Bsdoguk Dvspfx Agtsdb Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995,

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost: 9.150 kg, nosilnost na odsek shranjevanja: 3.050 kg, skupna dolžina: 22.800 mm, skupna višina: 3.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 22.800 mm, 4 dvopolna paletna regala (M35112711-3) vsak 5,7 m dolg, 3,5 m visok, 1,1 m globok, vsak s 2 polji, širokimi 2,7 m, vsak s 3 nivoji prečk, nosilnost na polje 3000 kg. - 12 okvirjev (RM3511 - RAL5019) - 24 talnih plošč, podlag, pritrdilni material - 48 talnih sider (ZZBA1210) - 48 posameznih prečk (T2711 - RAL2008) - 4 oznake nosilnosti (BSMcP) Okvirji so vijačeni, ne predmontirani Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - brezplačna dostava na gradbišče / mesto montaže - razklad tovornjaka izvaja kupec z lastno dvižno opremo - dobave po celotni Nemčiji, razen otokov! Dobave v EU države po individualnem dogovoru. Bjdsyz Iccjpfx Agtedb

Stanje: zelo dobro (rabljeno), Edgebander FORMAT 4 Tempora 60.06 glueBox - used Touchscreen Swiveling control panel Program memory Automatic pressure bridge adjustment Feed via transport chain Extendable workpiece support Diamond jointers for both climb and counter-rotation Glue pot located at the bottom Quick-change glue pot system Suitable for PUR adhesives GLUEBOX system Pressure unit with powered roller Cut-off saw with 2 high-frequency motors Cut-off saw, pneumatically tiltable Flush / radius milling unit Motorized positioning control for milling unit x-motion PLUS Corner rounding unit with diamond-coated cutters Radius scraper blade Radius scraper blade with motorized positioning Flat scraper blade Workpiece-activated flat scraper blade Infeed lock Spraying unit for release agent Spraying unit for lubricant Spraying unit for cleaning agent Year of manufacture: 2022 ----- Technical Specifications ----- Edging thickness, coil material: 0.4 - 3 mm Edging thickness, strip material: 3 - 6 mm Workpiece thickness: 8 - 60 mm Min. workpiece length: 140 mm Feed speed: 10 m/min Screen diagonal: 15 inches Jointers dimensions: D 80 x 64 mm Jointers power: 1.1 kW Cut-off saw power: 0.35 kW Milling station power: 0.75 kW Extraction port diameter: 80 + 160 mm Compressed air connection: 7 - 10 bar Total length: 4,872 mm Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm Weight: 1,500 kg Quality Info: - All settings checked - Adjusted to manufacturer specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Immediately ready for operation Bdodpfx Asu R S Nwegtsb

Stanje: dober (rabljeno), 4-postajni knjižnovezni stiskalnik za lepljenje blokov MURO 4 x 5000 A4/HAD Trdna konstrukcija, vodoodporna plošča in pocinkane komponente. Stroj je v brezhibnem stanju. Tehnične specifikacije: Bjdpfx Agsy Ehnaotodb Format: 350x320x550 (Š/G/V) Število postaj: 4 Napajanje: 230V Maksimalna poraba moči: 4kW Teža: 102kg Visoka vpenjalna sila, vztrajnika z udobnim oprijemom. Električno sušenje z dvema stopnjama moči: 2 in 4kW Vsak stiskalnik je mogoče nagniti do 45′ Konstrukcija je na kolesih za lažje premikanje.

Stanje: dober (rabljeno), GUK FA 49/4 zgibalni stroj + GUK FA 49/4 prečni zgibalni modul Stroj je v zelo dobrem tehničnem in vizualnem stanju. Format: 490x690 mm. Hitrost zgibanja: 30–160 m/min Oprema: 4 vzporedne kasete na glavni enoti 4 pravokotne kasete na prečni zgibalni enoti Prva kaseta podaljšana. Prilagoditve kasete so na številčnici. Gladko nastavljiva hitrost. Bdsdpfsy Ehk Iex Agtsb Števec z možnostjo porcij in prikazom hitrosti zgibanja. Rietschle kompresor. Orodni valj z veliko število pripomočkov za perforacijo, biganje in rezanje. Povišani pokrovi za zvočno izolacijo. Podajanje s pomočjo vakuuma. Mobilni izhod (prosto stoječa izhodna enota) z gladkim upravljanjem hitrosti. Popolna dokumentacija. Obsežen nabor dodatne opreme.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ponujamo 4 kose turbin Schlick - 320 mm, vključno z motorji 7,5 kW. Turbine iz Schlick ROTO-JET RB500 5.2/4/7,5. Tip turbin - 5.2. Količina abraziva - 140 kg/min. Hitrost abraziva na izhodu - 70 m/s. Turbine po generalni obnovi. Stroji za peskanje, peskalniki. Cena za 1 kos - 3000 EUR. Bodpfx Agjvphf Ustsdb

Stanje: dober (rabljeno), Leto izdelave: 2005, skupna dolžina: 4.200 mm, skupna širina: 2.500 mm, skupna višina: 1.800 mm, višina izdelka (maks.): 4 mm, skupna masa: 7.000 kg, Shearing capacity 4 mm, cutting length 3050 mm, throat depth 350 mm, motor 18.5 kW, motorised backgauge, support arms with scale, cutting line illumination, foot pedal, pneumatic sheet holders, new IMEX PLC control, dimensions 420x250x180 cm, approx. 6500 kg Bdjdjtp I S Aopfx Agteb

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 34.000 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, prostor za palete: 108 evropske palete, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 8.500 mm, dolžina opore: 2.700 mm, 4 rows of pallet racking (4 x M35112711-2) - Each 8.5 m long, 3.5 m high, 1.1 m deep - Each with 3 bays, 2.7 m wide - Each with 2 beam levels, compartment load capacity 3,000 kg Included: - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, fastening material - 64 floor anchors (ZZBA1210) - 48 single beams (T27114 - RAL2008) Bdsdov Ukz Aspfx Agtob - 4 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - Max. 20 working days after receipt of payment - Delivery free to site / installation location - Unloading from the truck is the purchaser’s responsibility using their own forklift equipment - Deliveries are made throughout Germany (mainland only, excluding islands) - Deliveries to EU countries by individual arrangement

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, skupna dolžina: 71.000 mm, skupna višina: 4.000 mm, razmak između stupova: 2.700 mm, višina police: 4.000 mm, število vrst polic: 7, nosilnost: 6.000 kg, višina okvirja: 4.000 mm, obremenitev na par nosilcev (maks.): 3.000 kg, Paletni regalni sistem 4 m visok, na polje 2 prečkinski ravni (svetlina 2700) Obseg: 32 okvirjev 4 m visokih 128 talnih sider 18 zaščitnih kotov proti naletom 100 prečk dolžine 2,7 m, višina 0,11 m 150 mrežastih polic 89/110, nosilnost 1000 kg 7 tablic z nosilnostjo Dobava na gradbišče brezplačno Okviri privijačeni, ne predmontirani Bsdpfx Agjyyny Ejtodb Prevoz / Dobava: - največ 20 delovnih dni po prejemu plačila - dobava brezplačno na gradbišče / mesto montaže - raztovarjanje s tovornjaka opravi kupec z lastno dvižno napravo - Dobave se izvajajo po celotnem območju Zvezne republike Nemčije, razen otokov! Dobave v države EU po individualnem dogovoru.