Goebel Darmstadt Rezalnik In Rezalna Naprava Za Papirne Role nakup rabljenega (133.509)

Stanje: rabljeno, Leto izdelave: 1975, Funkcionalnost: popolnoma funkcionalen, Stroj za rezanje in previjanje papirja – Goebel Lhjdpfx Aoxcxluel Njf Robustna industrijska oprema, izdelana v Nemčiji, posebej zasnovana za rezanje in previjanje papirnatih zvitkov. Zagotavlja visoko natančnost pri obdelavi večjih zvitkov ter je idealna za pripravo materiala za tiskarne, proizvodnjo embalaže in druge uporabe v papirni industriji. Trdna konstrukcija in dokazana zanesljivost omogočata uspešno uporabo teh strojev tudi po več desetletjih delovanja.

Stanje: rabljeno, Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg, Holland Model R96-20 Serial No. 9745 Year of manufacture: 1999 Load capacity: 2,000 kg Centering mandrel: Ø 90 mm Suction area outer diameter: 850 mm (plus seal) Suction area inner diameter: 250 mm (minus seal) Seal width: 50 mm Suction area: 0.5 m² Vacuum: min. -800 mbar Suction capacity: approx. 100 m³/h per vacuum pump Lhjdpfodzqc Isx Al Nof Motor power: 2x 2.2 kW Power supply: 400 Volt, 50 Hz - 2 Rietschle vacuum compressors, type VCE 100 Dimensions Ø x H: 1,600 x 2,250 mm Height with centering mandrel: 2,500 mm Total height in transport frame: 2,950 mm Own weight: 2.5 tons.

Stanje: rabljeno, Plasma Cutting Machine MB - Welding Technology Type Plasmaprof 50 Lhedpfx Alodzqa Hj Nof Equivalent to CEBORA Machine No. 244311 Year of manufacture approx. 1992 Output: 50 Amp = 35% duty cycle 30 Amp = 100% duty cycle Adjustment Range: 2 steps Torch hose package length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Space requirement (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition

Stanje: rabljeno, Fiber laser, fiber laser cutting system with flatbed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer: DURMA Model: HD-F III 3015 III BH-IPG 2kW Serial number: 822817712 Year of manufacture: 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area: 3000 x 1500 mm Tube cutting device up to Ø 400 mm Laser power: 2,000 watts (fiber laser) Output power: 0.2 to 2 kW Wavelength: 1070–1080 nm Ledpokdnv Tjfx Al Nshf IPG power demand: 6.4 kW/hour - Polarization: random - Collimation focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter single mode 50, 100, 200, 300 μm - Maximum power consumption: 42 kW - Machine power consumption: 20 kW - Filter power consumption: 4 kW - Chiller power consumption: 10+1 kW - Resonator power consumption: 7 kW Mild steel sheet thickness max.: 12 mm - Stainless steel sheet thickness max.: 6 mm - Aluminum sheet thickness max.: 6 mm - Copper sheet thickness max.: 3 mm - Brass sheet thickness max.: 6 mm X-axis working area: 3060 mm Y-axis working area: 1530 mm Z-axis working area: 160 mm Maximum sheet size: 3048 x 1524 mm Maximum sheet weight: 200 kg/m² - IPG fiber laser resonator next to machine - Water recooling unit for laser source and cutting head installed - Under-table extraction and extraction/filter unit installed - With double exchange table - Tube laser with 4-jaw chuck and large spindle bore next to flatbed - Steady rests for tube laser on linear guides - With CAD software - With nesting software - With tube laser software Very good condition

Stanje: rabljeno, Leto izdelave: 2023, proizvajalec krmilnikov: Sonstige, model krmilnika: Formtracepak V6.1, Opis: Lhjdey Dy A Topfx Al Nsf Tehnični podatki: Pomik v X/Z: 100/500 mm Vpenjalna površina: 600 x 450 mm Križna miza (X/Y): 100/50 mm Oprema/Dodatki: Formtracer: FTA-H4 D3000-D Contracer: C-3200 Surftest: S-3000 Upravljanje: Ročni upravljalnik z joystickom Ostala oprema: Vrtljivi primež, Kalibracijski etaloni, Zaščitna ponjava

Leto izdelave: 2025, stanje: novo, New machine Year of manufacture: 2025 Features and technical specifications: Standard configuration: - Robust machine base body - Dowel system for: dowel diameter 8 mm dowel length 35 mm (factory setting, adjustable from 30 to 40 mm) dowel projection 12 mm (factory setting, adjustable from 7 to 20 mm) recoil-free insertion gun vibratory feeder for dowel transport dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels water tank (stainless steel, 7.5 liters) closed water system with 6 bar water pressure and spray nozzle - Electronic control system with: main power switch ON / OFF program selector switch water / water + insertion Ljdpowx Aadsfx Al Njhf potentiometer for dowel feed rate via vibratory feeder potentiometer for water injection quantity indicator light for minimum water level in tank - Chassis/mobile base - Pneumatics: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for counter-bore processing: 1 unit HoKuTech | DübelJet with LeimJet expansion kit incl. devices for hanging/connecting to the DübelJet incl. height-adjustable suspension for glue hose/ Included: 1 HoKuTech | LeimJet glue dispensing unit for counter-bore application for use with PVAc glues up to 75,000 mPas viscosity incl. dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Leto izdelave: 2004, stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, dolžina plošče: 3.000 mm, širina plošče: 1.200 mm, višina zlaganja: 1.600 mm, TEHNIČNI PODATKI Ljdpfx Alsyxnqus Njhf Največja širina plošče: 1.200 mm Največja dolžina plošče: 3.000 mm Največja višina sklada plošč od tal: 1.600 mm OPREMA Sistem gibanja: priseski Vakuumska črpalka Stroj se prodaja in dobavlja v dejanskem in pravnem stanju ("videno-kupljeno") na podlagi fotodokumentacije in tehnične/komercialne dokumentacije opisnega značaja. Kupec ima pravico, da blago pred prevzemom pregleda in prevzema odgovornost za montažo, varovanje in uporabo stroja na ciljni lokaciji. Zunanja referenca: 7684

Stanje: rabljeno, sestavljeno iz: osnovnega ogrodja, 2 kos skladiščnih rezervoarjev, nerjaveče jeklo, rezervoar, proizvajalec WERIT, enota za osmozo, tip: SILHORKO, leto 1995, krmilna omara, proizvajalec RITTAL, s cevnim sistemom, filtrirno, črpalno in ventilno tehniko ter 2 kos nagibnih kadi na kolesih Lsdpey Aqchofx Al Nehf

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Chip extraction unit CORMAK FM230A + 2.5 m hose The CORMAK FM230A chip extraction unit is a high-performance sawdust extractor designed for the efficient removal of wood chips, shavings, and dust generated during woodworking processes. This compact chip extractor is perfectly suited for joinery workshops, production plants, and home workshops where effective dust extraction at workstations is required. The model comes equipped with a flexible extraction hose, 2.5 m in length, allowing quick connection of the chip extractor to woodworking machines such as planers, table saws, spindle moulders, or thicknessers. This setup enables the dust extraction system to be easily positioned anywhere in the workshop, ensuring efficient removal of dust and chips directly from the generation source. A powerful extraction fan delivers an airflow rate of up to 1080 m³/h, ensuring fast and effective suction of wood dust and chips. Its robust construction and metal impeller guarantee stable operation, high durability, and reliability—even under intensive use in a carpentry environment. Lsdpfxoytn Tds Al Nshf The mobile design with wheels makes it convenient to move the device between workstations, and the integrated filtration system with collection bags effectively separates the air from the wood chips. As a result, the wood dust extractor keeps the workshop clean and improves both working comfort and safety. Key Features - Includes 2.5 m Ø100 mm extraction hose - High extraction efficiency – up to 1080 m³/h - Powerful fan for wood chips and shavings - Single-phase motor 0.75 kW / 230 V - Durable metal impeller for chip extraction - Mobile design with transport wheels - Efficient filtration system for chips and wood dust - Large waste bag for extended operation - Compact design ideal for woodworking shops Applications The CORMAK FM230A chip and dust extractor is designed for use with a variety of woodworking machines that require effective dust extraction: - Planers and jointers - Thicknessers - Table saws - Spindle moulders - Wood sanders With its high airflow rate, the dust and chip extractor effectively removes debris generated during woodworking, improving visibility at the workplace and reducing airborne dust. Standard Equipment - CORMAK FM 230A chip extractor - 2.5 m extraction hose Ø100 mm - Filter bag - Waste bag - Clamping bands - Mobile base with wheels Technical Specifications Motor power: 0.75 kW Power supply: 230 V / 50 Hz Extraction capacity: 1080 m³/h Motor speed: 2800 rpm Vacuum: 1000 Pa Noise level: 68 dB Number of bags: 2 Suction inlet diameter: 100 mm Hose length: 2.5 m Bag capacity: 90 l Height: 1800 mm Width: 750 mm Length: 450 mm Weight: 27 kg

Stanje: zelo dobro (rabljeno), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% machine weight reduction thanks to a new body design - Laser cutting point indicator - New ergonomic handle - Swivel-mounted cable with quick coupling The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outside diameter [mm]: 12 – 120 - Pipe wall thickness [mm]: 1 – 9 - Pipe inside diameter (blade Ø 63mm) [mm]: min. 21 - Pipe inside diameter (blade Ø 68mm) [mm]: min. 16 - Pipe inside diameter (blade Ø 80mm) [mm]: min. 4 - Integrated electronic speed controller: 65 – 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200–240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB(A) GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, preventing deformation. Pipe diameter and—in accordance with the pipe material—tool rotational speed are quickly set using easy-to-operate mechanisms. The cutting device is guided manually by rotating it around the pipe, while an electrically powered saw blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time-saving and cost-effective solution: Ljdpfxsym Unzo Al Njhf - Perpendicular, flat, and burr-free cuts - Pipe ends are prepared for various joining techniques without the need for additional post-processing - Cold cutting – no overheating, thus preventing intergranular corrosion that could cause material cracking - Fast cutting – saves time and money - Beveling of pipe ends – pipe ends can be beveled simultaneously during cutting or separately Optional parts: GF and RA machines can be supplied with either the AVM automatic rotation module or the MVM manual module. - The AVM module continuously monitors cutting speed depending on torque and set parameters. - The MVM module, with a spur gear and handle, enableshead rotation at the same speed with minimal effort.

Stanje: rabljeno, Spot welding tong with DALEX RS 17 controller and balancer Spot welding tong DALEX Type A 3139 Manufacturing No.: 98G 69757 Year of manufacture: 1998 Rated output at 50% duty cycle: 8 kVA Welding power max.: 22.4 kVA Open-circuit voltage: 2.9 Volt Electrode force max.: 200 daN Short-circuit current max.: 9.5 kA Cooling water flow: 1.5 l/min Power supply: 400 Volt, 50 Hz Throat depth: 250 mm Arm spacing: 120 mm Electrode holder diameter: 12 mm Spot electrode diameter: 6 / 12.5 mm Electrode gap max.: 230 mm - Tong with water cooling - without cooling unit - cooling water requirement: 1.5 liters/min. - Suspension device Balancer DALEX Type D4-21 Weight of welding tong: 15.5 kg Welding controller DALEX RS 17 LS 5-phase synchronous welding controller with 2 welding programs PAS No.: 0413-410 Lsdpfx Alsyxrhdj Nshf Serial No.: 41341000278 Year of manufacture: 2006 Operating modes: Single (EP) / Series (SP) Squeeze, hold, off, and pause times: each 1 – 99 cycles Current time: 0.5 – 9.5; 10 – 99 cycles Welding current: 0 – 99 Skt. Pulses: 1 – 99 Current rise time: 0.5 – 9.5; 10 – 15 cycles Parameter adjustment: via arrow keys - with solenoid valve control - Current setting via phase angle control - Welding controller in sheet metal wall cabinet for wall mounting Total weight: approx. 30 kg Very good condition

Stanje: rabljeno, Debelina pločevine 4,0 mm Lhjdpfx Aey D A Eqol Nof Premer valja cca 120 mm Iztegnitev 450 mm Teža stroja cca 0,48 t Dimenzije cca 1,3 x 0,8 x 1,8 m

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, Frisch Spritz Matic Set 6 Jet Naprava za nanašanje marelične in glazurne mase Preliv za torte in fondant Univerzalni stroj Izdelava iz nerjavečega jekla 2 posodi za material 2 pršilni postaji Čiščenje z vodo Premična naprava Lhsdpfsyv Uxyjx Al Nof Priključek 400V, vtič 32A-CEE Rabljena naprava iz pekarne

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 04/2027, vrsta vhodnega toka: Klimatska naprava, Naprava za mešanje in doziranje vode Aquamix 32 Popolnoma avtomatska naprava za mešanje in doziranje vode z avtomatsko nadzorovanim predhodnim tokom in numeričnim vnosom Tehnični podatki: Temperaturni priključki: 3 (z ledeno vodo) Obseg doziranja: 0,1 l - 999,9 l Območje nastavitve temperature: +0,5°C do +70°C Natančnost temperature: +/-2°C Natančnost doziranja od 1 l: +/- 0,1 l Pretok vode pri 3 bar: do 30 l/min Priklop vode: 3/4" zunanji navoj Lhedpfx Ajygdaysl Nof Priklop elektrike: 100 - 240V; 50Hz Dimenzije naprave (Š x V x G): 300 x 300 x 170 mm Rabljena naprava Na zalogi imamo tudi druge naprave!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, nosilnost: 3.000 kg, Objemka za papirne role Lhsdpfxoyzdfto Al Nef ISO razred: ISO razred 3 = 2.500 - 4.999 kg Tehnično stanje: dobro Opis: Leto 2008, ISO 2A / 3A, Nosilnost 3000 kg, Rotator 180°, Obseg odpiranja 250-1300 mm, Širina 770 mm, Kontaktne ploščice 400x250 mm, ID OS1936

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: DOCAT 70, Ponujamo ta rabljen generator ozona in napravo za odstranjevanje Tonello ECOFREE 2, letnik 2018. Tip stroja: DOCAT 70 Napajanje: 3Ph+GND Napetost in frekvenca: 400V-50Hz Tlak stisnjenega zraka: bar Hidravlični tlak: bar Največji parni tlak: bar Teža: 300 kg Prostornina bobna: l Serijska številka: 07758 Leto izdelave: 2018 Lsdjyvzznjpfx Al Nohf Vgrajena moč: 4 kW Največji konični tok: 7 A Največji delovni tok: 3 A Prerez napajalnega kabla: 4 mm² Če imate vprašanja ali potrebujete dodatne informacije, nam pišite ali nas pokličite.

Stanje: dober (rabljeno), Load capacity: 200 kg Tipping height: 2200 mm Lhjdjum Slvepfx Al Njf Container size: 800x600x550 mm

Stanje: zelo dobro (rabljeno), Precision measuring and presetting device for CNC tools from the renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, along with Heidenhain ND1202T Tool-Chek electronics. The device is in very good condition, fully functional and complete. Technical data and equipment: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Readout system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optics with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • Measuring range X/Z axes: up to approx. 400 mm • Axis control from KELCH panel (joystick + function keyboard) • Digital readout, menu available in German and English Lodoxn Ax Ajpfx Al Nshf • Supplied with original documentation and complete set of connectors Condition: • Used, fully functional • Very clean unit from a German toolroom • All axes move smoothly, screen responds correctly • Ready for operation Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools before installation in a CNC machine. The optical system with Pico LCD enables visual measurement of tool length, diameter, and geometry. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools.

Stanje: dober (rabljeno), Uchida Aero Cut One – bigovací, drážkovací a řezací stroj Stroj je plně funkční a připravený k okamžitému nasazení do výroby. Popis: AeroCut One umožňuje řezání, perforování a bigování archů v jednom pracovním cyklu. K obsluze stroje stačí jedna osoba, čímž výrazně zvyšuje efektivitu práce a snižuje provozní náklady. Zařízení je ovládáno prostřednictvím intuitivního dotykového panelu. Funkce: řezání, bigování, perforace Maximální formát papíru – 370 x 520 mm Minimální formát papíru – 55 x 45 mm Maximální gramáž – 400 g/m² Rychlost – až 11 130 vizitek/hod. Typy papíru – ofsetový, křídový, lakovaný papír Podávání – pásový podavač s nastavitelným vakuem Bigování – páskového typu Lodpfjyrz Raox Al Nehf Paměť – 263 programů + 150 uživatelských Programování přes dotykový displej Připojení k PC Detekce dvojitého podání Hmotnost: 240 kg Napájení: 230 V Vyrobeno v Japonsku.

Stanje: dober (rabljeno), Leto izdelave: 2010, Formax Ultra F26 former na voljo za prodajo. Stroj je opremljen z možnostjo Verti-Form in je idealen za izdelavo perutninskih burgerjev in nuggetov. Kupljen nov leta 2010. Ledpfxsqudine Al Nshf

Leto izdelave: 2013, stanje: zelo dobro (rabljeno), Lifting and tilting device – swiveling unit for emptying, filling, and tilting bulk materials / small parts, etc. Manufacturer: Schüssler Type: HS-F1000 Year of manufacture: 2013 Lodpfx Ajh Dbnpsl Nehf Hydraulic swiveling Load capacity: 1,000 kg Mobile design, equipped with a locking spindle for swiveling operations. Version with bulk material chute, manually adjustable steplessly. Push-button operation for up/down and emergency stop. Dead weight: 700 kg

Stanje: rabljeno, Plasma cutting unit CLOOS type CPS 40/80 Year of manufacture: 1990 Output at 60% duty cycle: 80 A Output at 100% duty cycle: 40 A Adjustable range: 40 and 80 amps (2 steps) Maximum cutting capacity for steel: 25 mm Torch package length: 5.5 meters Power supply: 400 V with 32 A plug - Hand torch CLOOS Lodpfxjdzqccs Al Nshf Dimensions (L x W x H): 700 x 600 x 750 mm Weight: 160 kg Good condition

Stanje: rabljeno, WIG Welding Machine DALEX Type GL/W 201 TIG Welding Machine Machine No.: 201 Year of manufacture: approx. 1995 Output 200 amps at 35% duty cycle 160 amps at 60% duty cycle 120 amps at 100% duty cycle Continuously variable adjustment range Current type: DC (direct current) Power supply: 400 Volt, 50 Hz, 5.9 kVA, 32 amp plug - 2-stroke and 4-stroke welding modes - TIG torch package 8 meters - HF ignition - Shielding gas pressure regulator Ljdpfx Aoi E Izvel Njhf - Electrode welding for stick electrodes - Fan cooling - Connection socket for foot pedal (without foot pedal) Required space (L x W x H): 850 mm x 450 mm x 700 mm Weight: 90 kg Welding test produces very good results when welding stainless steel with direct current. Otherwise in very good condition as well.

Stanje: rabljeno, Electronic Crane Scale MWT Type 142 Serial No.: 142571 Year of manufacture: 1993 Tensile force measuring device, crane scale Measuring range: 2,500 to 80,000 kg Minimum measurable value: 20 kg Power supply via 12 Volt battery - Suspension shackle for double hook, anchor hook - Operation, saving of measurement values, and tare via remote control - Storage for measurement values (weights) - Printer for measurement values Very robust and high-quality steel body Ljdpog D H Rijfx Al Njhf Net weight: approx. 200 kg

Stanje: rabljeno, Universal temperature control unit WEINREICH Type WTD 4 Temperature control unit with electric heating and connections for external cooling Serial No.: 11932217 Year of manufacture: 1993 Maximum temperature: 140°C Maximum operating overpressure: 6 bar Pump capacity: 30 l/min Tank volume: 4 litres Heating capacity: 4 kW Cooling capacity (heat exchanger): 15 kW Pump motor output: 0.37 kW Circulating water supply & return: G 3/8" Cooling water supply & return: G 3/8" Total power: 4.4 kW Power supply: 380 Volt, 50 Hz, CEE plug - Temperature control medium: water - Temperature controller with actual and setpoint display STÖRK-TRONIC Type ST 96-35.02K - Water circulation pump: SPECK Lhjdpfx Alsg Rhx Uj Njf - An external chiller is required for cooling (the chilled water is supplied to the temperature control unit) - Mobile on 4 castors Dimensions (L x W x H): 620 x 260 x 670 mm Weight: 55 kg Good condition