Gildemeister N.e.f. 1020 nakup rabljenega (863)

Stanje: dober (rabljeno), Leto izdelave: 1985, CNC Lathe Manufacturer: GILDEMEISTER Type: N.E.F. 1020 Year: 1985 Control: EPL 2 Swing diameter over bed: 1020 mm Swing diameter over cross slide: 600 mm Turning length: 3000 mm Spindle speeds: 5 - 1120 rpm Motor power: 30 kW Spindle bore: 128 mm Tool turret: Parat size 4 with 10 tool holders Faceplate: 900 mm, steady rest, drilling support, chip conveyor Complete machine documentation and parameters available. Machine is dismantled and in storage. Bjdoqc Ul Aspfx Agtjdb Total weight: approx. 12,000 kg. For further technical data, see datasheets.

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 1994, obratovalne ure: 68.921 h, Funkcionalnost: nefunkcionalno, izvrtina vretena: 70 mm, stružna dolžina: 1.500 mm, premer struženja: 500 mm, premer nihanja nad prečnim premičnikom: 290 mm, poteza s peresom: 180 mm, največja hitrost vretena: 2.800 obr/min, skupna masa: 3.200 kg, Good day, We hereby offer you, without obligation, a used, defective cycle lathe from the manufacturer Gildemeister. Manufacturer: Gildemeister Model: NEF 500 Plus Year of manufacture: 1994 Total operating hours: 68,921 hours Turning diameter: 500 mm Turning length: 1,500 mm Control: Manual Plus Spindle bore diameter: 70 mm Speed range: 8 - 2,800 rpm Gear stages: 3 Max. swing diameter over cross slide: 290 mm Spindle nose: DIN 55027 size 8 Tool holder: Type C Quill stroke: 180 mm Machine weight: approx. 3.2 t Dimensions L x W x H: 3.0 x 1.8 x 1.8 m Note: The above-mentioned technical data were taken from the operating manual, manufacturer’s brochures, or other sources. We cannot guarantee their accuracy or completeness. Scope of delivery: 1 used Gildemeister N.E.F. Plus cycle lathe Condition: The cycle lathe is not operational, as the control system no longer boots. The machine can be inspected under power at our workshop, but cannot be operated. Therefore, we are selling the machine as defective. We would be pleased if this machine is of interest to you. Bdedpfx Agoy Hr U Hotob Your service team at Mertens & Frowein GmbH

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 19.229 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8043943123C, stružna dolžina: 1.050 mm, premer struženja: 465 mm, potovalna razdalja osi X: 300 mm, pomik po osi Z: 1.050 mm, model krmilnika: Siemens 840 D, TEHNIČNI PODATKI Premer struženja: 465 mm Dolžina struženja: 1.050 mm Premer pri struženju: 680 mm Premer vpenjalne glave: 325 mm Pomik osi X: 300 mm Pomik osi Z: 1.050 mm Območje vrtljajev: 3.500 min⁻¹ Hitri pomik X/Z: 30 m/min PODROBNOSTI O STROJU Krmiljenje: Siemens 840 D Število mest za orodje: 12 pozicij Vpenjalni sistem orodja: VDI 40 Teža: 7.500 kg Obratovalne ure Bdsdsy D I Ttspfx Agtjb Ure vretena: 19.229 h Ure vklopa: 81.347 h Opomba: Stroj je mogoče na zahtevo pregledati pod napetostjo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.585 mm, premer struženja: 300 mm, model krmilnika: Siemens 840D Powerline, število mest v zalogovniku orodij: 120, Brez minimalne cene – zagotovljena prodaja za najvišjo ponudbo! TEHNIČNI PODATKI Bedpfsy Dqtiox Agtjdb Dolžina struženja: 1.585 mm Premer struženja: 300 mm Kapaciteta orodjnega magazina: 120 mest PODATKI O STROJU Krmiljenje: Siemens 840D Powerline OPREMA Protivreteno C-os Cevna vpenjalna naprava (premer 68 mm) na glavnem vretenu, levo Merilna naprava s tipalom Lovilec oljne megle

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 27.896 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2101-0171, premer struženja: 20 mm, največja hitrost vrtenja: 10.000 obr/min, vrtilni moment: 14 Nm, Oprema: podajalnik palic, transportni trak za ostružke, TECHNICAL DATA Max. turning diameter: 20 mm Tool body diameter: 20 mm Spindle positioning resolution: 0.1° Main spindle Rated power: 3.7 kW Power: 5.5 kW Torque: 14 Nm Bjdpoy Dr S Hofx Agtsdb Rated torque: 9.4 Nm Speed: 10,000 rpm Axis Data Linear axis Z1 / X1 / Z1 – Travel: 80 / 35 / 240 mm Linear axis Z1 / X1 / Z1 – Max. feed rate: 40 m/min Linear axis Z1 / X1 / Z1 – Max. acceleration: 10 m/s² Linear axis Z1 / X1 / Z1 – Nominal force: 1,250 N Linear axis Z2 / X2 – Travel: 180 / 230 mm Linear axis Z2 / X2 – Max. feed rate: 40 m/min Linear axis Z2 / X2 – Max. acceleration: 10 m/s² Linear axis Z2 / X2 – Nominal force: 1,250 N Tool holder Number of fixed tools (internal): 6 Diameter: 20 mm Number of fixed tools (external): 4 Tool shank size: 12 × 12 mm Number of driven tools: 4 Collet type: ESX 16 MACHINE DETAILS Control: Fanuc 16iT Machine dimensions (L × W × H): 2,275 × 1,300 × 1,760 mm Weight: 2,600 kg Connected load: 21 kVA Operating hours: 85,620 h Program run time: 27,896 h EQUIPMENT - Bar feeder FMB Turbo 3-36 / 4200 / A, year of manufacture 2007 - Coolant tank with chip conveyor - Centralized lubrication - Handheld control device - Documentation available

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 60.425 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.050 mm, premer struženja: 465 mm, potovalna razdalja osi X: 300 mm, zunanji premer vpenjalne glave: 325 mm, model krmilnika: Fanuk Series 21I-TB, TEHNIČNI PODATKI Maksimalna dolžina struženja: 1.050 mm Premer struženja nad prečnim suportom: 350 mm Maksimalni premer struženja: 465 mm Premer vpenjalne glave: 325 mm Pomik X-osi: 300 mm Pomik Z-osi: 1.050 mm Maksimalno število vrtljajev: 3.500 min⁻¹ Maksimalni navor: 630 Nm Premer ležaja v vretenu: 120 mm Maksimalni premer palice: 90 mm Hod konjička: 850 mm Hod tulec konjička: 150 mm Hitri pomik X/Z-osi: 30 m/min Število položajev revolverske glave: 12 Držalo orodij: VDI 40 PODATKI O STROJU Bdedpfx Asy Hg S Hsgteb Krmiljenje: Fanuc Series 21I-TB Pogonska moč: 33 kW

Stanje: rabljeno, Leto izdelave: 2011, Swing diameter 410 mm Turning length 800 mm Control Sinumerik 840 D ERGOLine Siemens Swing diameter over bed 700 mm Max. turning diameter 410 mm Travel path - X axis 300 mm Travel path - Y axis +/- 60 mm Travel path - Z axis 800 mm Spindle speed range max. 4,000 rpm Chuck diameter 260 mm Spindle bearing diameter 130 mm Drive power 40% duty cycle = 34 kW Drive power 100% duty cycle = 25 kW Max. torque 280 Nm C-axis 0.01° Turret (number of stations) 12 Toolholder DIN 69880 / 40 mm Driven positions 6 Speed range of driven tools ~ 4,000 rpm Drive power – driven tools 40% duty cycle = 11.3 kW Drive power – driven tools 100% duty cycle = 5.6 kW Rapid traverse (X / Y / Z) 30 m/min Tailstock travel 800 mm Morse taper MT 5 Total power requirement 65 kVA Machine weight approx. 6.2 t Space requirement approx. 5.5 x 3.0 x 2.5 m CNC Turning and Milling Center GILDEMEISTER - CTX beta 800 V4 - Spindle hours: approx. 14,779 h - Package for unstable power supply - Extended operator panel - Hollow clamping device 95 mm Bedpfjy Hl Exjx Agtedb - Hollow spindle stop 95 mm - Differential pressure clamping for main spindle - incl. workbench - incl. tool cabinet - incl. tool cabinet for VDI toolholders - incl. 2x driven tools - incl. 6x tool holders

Stanje: rabljeno, Leto izdelave: 2012, Turning diameter: 350 mm Turning length: 650 mm Control system: 840 D SL ShopTurn Siemens Swing diameter over bed: 385 mm Swing diameter over cross slide: 350 mm Bdjdpfxjy E Tvvo Agtjb Main spindle speed range: 0 – 4,500 rpm Main spindle drive power: 11.5 / 8 kW Max. torque: 340 Nm Spindle diameter at front bearing: 130 mm Spindle bore: 87 mm Max. bar capacity: 65 mm Max. chuck diameter: 250 mm Spindle nose: 170 h5 Number of tool stations: 12 positions Shank diameter DIN 69880: 30 mm Number of driven tool stations: 6 positions Speed range – driven tools: max. 4,500 rpm Drive power on driven tool stations: 5.5 kW X-axis travel: 255 mm Z-axis travel: 800 mm Tailstock quill travel: 680 mm Tailstock taper: MT 4 Clamping force: 6.8 kN Feed rate: 0 – 30,000 mm/min Rapid traverse (X / Y / Z): 30 / - / 30 m/min Feed force (X / Y / Z): 4.5 / - / 6.2 kN Total power requirement: 28 kW Machine weight: approx. 3.3 t Space requirements: approx. 5.0 x 2.5 x 2.3 m CNC universal lathe GILDEMEISTER - NEF 400 V3 - C-axis - Driven tools - Only approx. 8,093 spindle hours - incl. 1x workbench - incl. 1x tool cabinet - incl. 1x cabinet for VDI holders - incl. 8x tool holders - incl. 4x driven tools (2x radial, 2x axial)

Stanje: rabljeno, Leto izdelave: 2002,

Stanje: rabljeno, Leto izdelave: 2003, max. spindle speed: 5,000 rpm X-axis travel: 160 mm Z-axis travel: 450 mm Number of turret stations: 12 Tool holder: VDI 30 Control: Heidenhain iT Plus Dimensions (L x W x H): 4.5 x 2.5 x 2.5 m Machine weight: 3,700 kg Technical Specifications: Main spindle: - Max. speed range: 6,000 rpm - Drive power: 16 kW - Max. torque: 155 Nm - Spindle nose: 140H5 Travel: - X-axis: 160 mm - Z-axis: 450 mm Rapid traverses: - X-axis rapid traverse: 60 m/min - Z-axis rapid traverse: 45 m/min - C-axis rapid traverse: 200 rpm Feed force: - X-axis feed force: 2.5 kN - Z-axis feed force: 4.0 kN Turret: - Max. tool stations: 12 positions - Driven tool stations: 12 positions - Max. driven tool speed: 5,000 rpm - Driven tool power: 10 kW - Tool holder: VDI 30 Bdedpfxov Ehawj Agtsb - Tool shank: 20 x 20 mm - Control: Heidenhain iT Plus - Hollow chuck cylinder: VNK 130/52 - Including C-axis and live tooling - Chip conveyor - Oil and coolant mist extractor with electrostatic filter

Stanje: rabljeno, CNC Lathe DMG MORI SEIKI – GILDEMEISTER Type CTX 310 ecoline Machine No. 8044001846E Year of manufacture: 2013 CNC Control: SIEMENS Sinumerik 840D sl Swing diameter over bed cover: 330 mm Swing diameter over cross slide cover: 260 mm Center height max.: 190 mm Distance between centers max.: 580 mm Turning diameter max.: 200 mm Longitudinal travel (Z-axis) max.: 450 mm Cross travel (X-axis) max.: 160 mm Bar capacity through draw tube: 51 mm Bar capacity at front bearing: 100 mm Spindle speed max.: 5000 rpm Feed rate X and Z: mm/min. Rapid traverse X-axis: 30 m/min. Rapid traverse Z-axis: 30 m/min. Feed force X and Z: 4500 Nm Tool turret: 12 stations Driven tool stations: 6 stations Bdsdpfxsyk Hrge Agtjb Tool holder: cylindrical VDI 30 mm Spindle drive motor power at 100% duty cycle: max. 11 kW Spindle drive motor power at 40% duty cycle: max. 16.5 kW Power supply: 400 Volt, 50 Hz, 21 kVA - CNC control SIEMENS Sinumerik 840D sl, system software NCU V04.04+SP02+HF02 - Controlled C4-axis (chuck position) and C1-axis for tool turret - 3-jaw power chuck AUTOGRIP Ø 210 mm with 1 set of hard jaws and 15 sets of soft jaws - Hydraulic hollow chuck AUTOGRIP - Clamping pressure adjustment to regulate clamping force - Tool turret SAUTER, type 0.5.901.020 with 12 stations (6 of which are driven) - 20 tool holders VDI 30 - Tailstock MK 4 - Indirect measuring system via rotary encoder - Chip conveyor with integrated coolant system - Workpiece remaining time display and piece counter (large display on the machine enclosure) - Control cabinet cooling unit - 9716 total operating hours (main switch on), of which 3322 spindle hours according to the counter - Operating instructions and manuals Machine footprint with chip conveyor (L x W x H): 4500 x 2600 x 2050 mm Base machine footprint (L x W x H): 2900 x 2150 x 2050 mm (3200 kg) Chip conveyor footprint (L x W x H): 3350 x 850 x 1650 mm (500 kg) Weight: approx. 4 tons Very good condition.

Stanje: zelo dobro (rabljeno), GILDEMEISTER Cycle Lathe Model NEF 320 Year of manufacture: 2003, with only 5,653 power-on hours (estimated spindle hours approx. 1,200!) CNC Control: SIEMENS 810 D with Manual Turn software Working Area: Centre height: 160 mm Centre distance: 750 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Bsdoy D Epljpfx Agtjdb Chuck diameter: 200 mm Cross slide travel: 185 mm Spindle: Spindle head DIN 55027: Size 6 Spindle bore: 50.8 mm Spindle taper: MK 6 Spindle diameter in front bearing: 85 mm Main Drive (AC): Main drive: 9.0 kW at 100% duty cycle Max. torque: 410 Nm at 100% duty cycle Spindle speed range: 10 – 4,000 rpm Speed control: stepless Gear stages: 2 (ZF gearbox) Feed Drive (AC): X-axis feed force: 3,000 N at 100% duty cycle Z-axis feed force: 6,000 N at 100% duty cycle X-axis rapid traverse/feed rate: 8 m/min Z-axis rapid traverse/feed rate: 10 m/min Tailstock: Quill diameter: 70 mm Quill stroke: 120 mm Quill taper: MK 5 Machine Dimensions: Length: 2,450 mm Height: 1,825 mm Width/Depth: 1,815 mm (2,400 mm with electrical cabinet doors open) Weight: 2,000 kg Connected load: 14 kVA Including: 3-jaw wedge bar chuck SCHUNK ROTA-Plus Ø 200 mm Multifix quick-change tool post size B 5 MULTIFIX tool holder cassettes size B Rotating centre Quick-action drill chuck Extendable chip tray Coolant system Electrically interlocked chuck guard Machine feet Operating manual Condition / Description: +++ very good +++ The NEF 320 comes from a vocational training centre and has seen very little use (see power-on hours). It was mainly used for training demonstrations. No production workload! The machine bed is practically as new. Backup battery replaced; data backup created. This machine impresses with its high performance and the professional SIEMENS 810 D control with user-friendly MANUAL TURN software. Function videos can be provided upon request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 38.407 h, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 300 mm, pomik po osi Z: 650 mm, moč vretenovega motorja: 26.000 W, skupna višina: 2.900 mm, skupna širina: 2.500 mm, skupna masa: 12.000 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840 Powerline, največja dolžina izdelka: 7.855 mm, število mest v zalogovniku orodij: 24, število osi: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It offers a spindle power of 65 kVA and a maximum spindle speed of 5,000 rpm. The machine features a tool magazine with 24 tools and a turret tool changer. With a robust weight of 12,000 kg and dimensions of 7,855 mm x 2,500 mm x 2,900 mm, this horizontal lathe is equipped with special features such as a probing system and internal coolant supply. If you are in the market for a high-quality lathe, consider the Gildemeister TWIN 65 machine we are offering for sale. Contact us for further details. • Machine design: 60° slant bed • Guideways: Roller guideways • Maximum turning diameter: 250 mm • Maximum turning diameter (standard): 120 mm • Maximum turning length: 900 mm • X1-travel (upper slide): 300 mm • Z1-travel (upper slide): 650 mm • Y1-travel (optional): ±40 mm • X2-travel (lower slide): 180 mm • Z2-travel (lower slide): 650 mm • X3-travel (sub spindle): 175 mm • Z3-travel (sub spindle): 670 mm • Main spindle chuck size: 175 / 200 mm • Max bar diameter (without reduction tubes): 62 / 65 mm • Spindle bore diameter: 79 mm • Spindle nose diameter: 170 mm • Collet diameter: 66 mm • Front bearing diameter: 120 mm • Main spindle power (40/100% duty cycle): 35 / 25 kW Bodpfxeyvz Ibs Agtjdb • Main spindle speed range: up to 5,000 rpm • Main spindle torque (40/100% duty cycle): 370 / 270 Nm • Spindle drive type: AC motor with integrated spindle motor • C-axis: Integrated for oriented stopping and contouring • C-axis speed: 2,000 rpm • C-axis holding torque: 270 Nm • Sub spindle power (40/100% duty cycle): 26 / 21 kW • Sub spindle speed range: up to 5,000 rpm • Sub spindle torque (40/100% duty cycle): 290 / 230 Nm • C-axis speed (sub spindle): 2,000 rpm • C-axis holding torque (sub spindle): 230 Nm • Rapid traverse X/Z (slide 1): 30 / 30 m/min • Feed force X/Z (slide 1): 4.0 / 7.0 kN • Positioning resolution X/Z: 0.0005 mm • Motor torque X/Z: 6 / 10.5 Nm • Motor speed X/Z: 3,000 rpm • Ball screw pitch X/Z: 20x32 / 20x40 mm • Rapid traverse X/Y/Z (with Y-axis): 30 / 15 / 30 m/min • Feed force X/Y/Z: 4.0 / 4.0 / 7.0 kN • Positioning resolution X/Y/Z: 0.0005 mm • Motor torque X/Y/Z: 6 / 6 / 10.5 Nm • Motor speed X/Y/Z: 3,000 rpm • Ball screw pitch X/Y/Z: 20x32 / 10x32 / 20x40 mm • Rapid traverse X/Z (slide 2): 30 / 30 m/min • Feed force X/Z (slide 2): 4.0 / 7.0 kN • Positioning resolution X/Z (slide 2): 0.0005 mm • Motor torque X/Z (slide 2): 6 / 10.5 Nm • Motor speed X/Z (slide 2): 3,000 rpm • Ball screw pitch X/Z (slide 2): 20x32 / 20x40 mm • Rapid traverse X/Z (sub spindle slide): 15 / 30 m/min • Feed force X/Z (sub spindle slide): 4.0 / 7.0 kN • Positioning resolution X/Z (sub spindle): 0.0005 mm • Motor torque X/Z (sub spindle): 10.5 / 10.5 Nm • Motor speed X/Z (sub spindle): 3,000 rpm • Ball screw pitch X/Z (sub spindle): 10x32 / 20x40 mm • Number of tool stations: 12 • Tool holder: VDI 30 • Tool changer type: Turret head • Tool shank size (DIN 69880): 30 / 40 mm • Number of driven tool stations: 12 • Driven tools: All 12 stations are suitable for driven tools • Driven tool power (40/100% duty cycle): 11.7 / 8.4 kW

Stanje: novo, Leto izdelave: 2025, Gildemeister 20 completely rebuilt as new - AC motor for production timing control - AC motor for threading operations - GM-type soundproofed guards Bdjdjfzk S Dspfx Agtjb - Frequency converter for programmable spindle speed - Bar capacity: 20mm, 25mm, 28mm with integrated bar loader - Options: CNC cross slides on X and Z axes, CNC pick-up with CNC sub-spindle slide - CE marking

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, For sale: CNC LATHE GILDEMEISTER CTX 310 V3 – Renowned Brand Equipped with driven tools and C-axis. Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control: HEIDENHAIN 4290 + TURN PLUS Overlay Country of origin: Germany Year of manufacture: 1999 Machine Specifications: - Turret: 12 tool stations for VDI 30 holders (every second station is powered) - Max spindle speed: 6,300 rpm - Max turning length on Z-axis: 455 mm - Max turning diameter on X-axis: 200 mm - C-axis - Driven tools - Main spindle chuck: 200 mm diameter - Max bar diameter: 51 mm - Parts catcher - Coolant system - Chip conveyor - Spindle drive power: 11 kW - Technical Documentation (DTR) - Machine weight: 3.2 tons WHY BUY MACHINES FROM PPM? Bodsvmy Icepfx Agtjdb - We have our own in-house and mobile service teams - Over 700 DMG machines sold - Start-up of the machine at the customer’s site possible - Operator training and delivery of the machine to the customer are included in the price - All of our machines undergo a professional technical inspection – 100% ready for work - Machine purchase available through instalment plans and leasing options.

Stanje: rabljeno, Integrirani avtomatski podajalnik Pietro Cucchi Pick-up Bdsdsy Exgtspfx Agtob Prevzemna sani pick-upa Hidravlična enota pick-upa

Stanje: rabljeno, Leto izdelave: 2001, Drehdurchmesser . mm Drehlänge . mm Steuerung . Typ . CCUO Drehdurchmesser über Support . mm Planweg . mm Spindeldurchlass . mm Drehzahl . U/min Getriebestufen . Pinolenhub . mm Bdsdpfx Ageyqwb Eotjb Eilgang . m/min Hauptantriebsmotor . kW Dreibackenfutter Durchmesser . mm Gesamtleistungsbedarf . kW Maschinengewicht ca. . t Raumbedarf ca. . m Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Technical Details Turning diameter: 410 mm Turning length: 1250 mm Control: Siemens 840 D ShopTurn Total power requirement: 60 kVA Machine weight approx.: 7650 kg Space requirement approx.: 5400 x 2600 x 2100 mm Additional Information CNC Lathe DMG CTX BETA 1250 with SIEMENS 840D SHOPTURN Spindle hours: 3956 h Power-on hours: 14440 h Max. swing diameter: 700 mm Max. turning diameter: 410 mm Clamping length: 1425 mm Turning length: 1250 mm Spindle bore: 95 mm X-axis travel: 300 mm Z-axis travel: 1300 mm C-axis indexing: 360000° Rapid traverse X / Z: 30000 mm/min Feed force X / Z: 4.5 / 7.5 kN Main spindle speed: 4000 rpm Power 100% DC (40% DC): 35 (45) kW Max. torque main spindle: 600 Nm C-axis speed: 200 rpm C-axis torque: 770 Nm Turret stations VDI 40 (DIN 69880): 12 – driven: 12 Speeds driven tools: 4000 rpm Power of driven tools at 2000 rpm: 12 kW Max. torque of driven tools: 36 Nm Tailstock taper: MT 5 Tailstock travel: 1200 mm Tailstock rapid traverse: 4 m/min Hydraulic steady rest clamping range: 20 - 165 mm, max. 60 bar Bodpfx Agjy H Eflstsdb Machine dimensions (L / W / H): 5400 / 2600 / 2100 mm Weight: 7650 kg Equipment and Accessories: - Chip conveyor - Oil mist extraction unit - Hydraulic steady rest SMW-Autoblock, type SLU-3 1-ZS - Tool holder package with static and driven toolholders - Various jaws for 3-jaw chuck Forkardt KS 315 - Tool Eye - Operating manual

Stanje: rabljeno, Machines for Export from Company Liquidation Stock No. 62506 = RAPID Double Mitre Saw Model DGL 5000 / 500 = approx. 1200 kg = Special price EUR 1,800 Stock No. 58052 = MÜLLER GEFREES Eccentric Press = approx. 4,700 kg = Special price EUR 2,400 Stock No. 59408 = Weingarten Eccentric Press = approx. 1,400 kg = Special price EUR 1,000 Stock No. 58984 = Müller Gefrees Eccentric Press = approx. 1,400 kg = Special price EUR 1,000 Stock No. 58309 = MÜLLER GEFREES Eccentric Press = approx. 1,000 kg = Special price EUR 1,000 Stock No. 60975 = Eccentric Press 16 t (Year 2017) = approx. 800 kg = Special price EUR 1,000 Bdedpoy Erzdjfx Agtob Stock No. 62267 (1) = Weingarten Eccentric Press 75 t (Machine 1) = approx. 4,800 kg Stock No. 62267 (2) = Weingarten Eccentric Press 75 t (Machine 2) = approx. 4,800 kg Stock No. 54183 = MÜLLER Hydraulic Press 10 t, without hydraulic pump = approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = MÜLLER Hydraulic Press Model HEP 40 = approx. 2,200 kg = Special price EUR 1,900 Hydraulic Press – Hydraulic Power Unit separate = approx. 3,000 kg Stock No. 60507 = WEBO Drilling Machine with 4 heads = approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL Drilling Machine with 2 heads = approx. 1,700 kg = EUR 1,200 Stock No. 60699 = WEBO Column-type Drilling Machine MK5 = 1,600 kg = Special price EUR 1,600 Stock No. 60177 = WEBO Radial Drilling Machine Model R4bR = approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Model GD 160 = approx. 4,000 kg = Special price EUR 1,900 --- Many more machines available immediately for export. e.g. 10 units welding machines CLOOS, ESS etc. 2x HITACHI SEIKI CNC lathes

Stanje: rabljeno, Leto izdelave: 2001, Technical Details: Turning length: 300 mm X-axis travel: 800 mm (cross travel) Z-axis travel (longitudinal): 300 mm Control: Siemens 840D Spindle speed (main drive): 20 – 5000 rpm Driven tool speed (turret): 6000 rpm C-axis speed: 0 – 100 rpm Spindle bore: 79 mm Torque (main drive): 200 Nm Torque at the spindle: 240 Nm Torque at the clamping device/tool turret: 28 Nm Rapid traverse X-axis: 100 m/min Rapid traverse Z-axis: 45 m/min Turret – number of stations: 12 stations Tool holder: VDI 40 Main spindle power: 27 / 20 kW Spindle operating hours: 42,400 h Total operating hours: 93,728 h Electrical specification – voltage/frequency: 3~ / 400V / 50Hz Interface: yes Total connected load: 50 kVA Approx. machine weight: 8.0 t Approx. machine dimensions (LxWxH): 3.2 x 3.95 x 2.8 m Chip conveyor dimensions (LxWxH): 3400 x 1150 x 2180 mm Application: Bsdpfx Aovamgxsgtsdb This vertical turning lathe is suitable for 2-axis machining (turning, drilling; milling, with Y-axis) of chuck parts. Equipment: – High-pressure coolant system BMF for 500 litres – Bürener chip conveyor with oil mist separator/industrial filter IFS/IFM 1000CTV (electrostatic extraction) – Workpiece loading and unloading device with/for 20 stations – Power chuck Ø 225 mm, foot pedal – Clamping area in the working space: W: 340 x H: 430 mm with 7x T-slots according to DIN 650 – Hydraulic system – 6x various tool holders for turning tools and 2x misc. tool holders (live tools)

Stanje: rabljeno, Leto izdelave: 2006, Technical details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Turning length: 850 mm Distance between centers: 850 mm Longitudinal travel (Z axis): 900 mm Cross travel (X axis): 260 mm Control: Manuaplus 4110 Spindle speed: 10 - 3000 / 2x stepless rpm Spindle torque: 920 Nm Spindle bore: 70 mm Cross travel (X axis): 8 m/min Bsdpfjwtct Hox Agtsdb Longitudinal travel (Z axis): 10 m/min Operating hours (machine on): approx. 34,600 h Tailstock taper ISO: MT 5 Tailstock quill stroke: 180 mm Total power requirement: 24 kVA Machine weight approx.: 5.2 t Machine dimensions approx. (LxWxH): 2.2 x 3.2 x 1.9 m Multifix toolholder size C 3-jaw chuck Ø 250 mm Chip tray Manual hour counter Live center in tailstock Operation via control panel and monitor Accessories: 4-jaw chuck Ø 250 mm with internal jaws Various chuck keys Machine lighting 8x leveling pads 4x wedge lifters Various pairs of jaws 1x steady rest Ø 100 mm, closed type

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Year of manufacture: 2004 Sauter 8-station turret VDI 20 + driven tool positions at all stations Spindle locking brake C-axis (interpolating) Reinforced coolant pump: 2.3 bar / 28 l/min Bjdpoy Dckasfx Agtsdb Control: Heidenhain MANUAL PLUS (cycle control) Monitor: 10.4" TFT VGA color screen Work Area & Capacity Swing diameter: 320 mm (over bed) / 150 mm (over cross slide) Center distance: 750 mm Cross travel: 185 mm Spindle bore: 56.6 mm Spindle nose: Size 6 (DIN 55027) / MT 6 (AC) Drive power: 9 kW (at 100% duty cycle) Max. torque: 410 Nm Speed range: 20 – 4,000 rpm (in two gear stages) Stage 1: 20 – 1,000 rpm Stage 2: 40 – 4,000 rpm Feed & Axes Rapid traverse (X/Z): 8 / 10 m/min Feed rate: 5 m/min Feed force: 300 daN (X) / 600 daN (Z) C-axis: interpolating (included as an option) Tool Turret & Tailstock Turret: 8-position disk turret (Sauter), all stations driven Speed (driven tools): max. 6,000 rpm (3.8 kW) Tool system: VDI 20 (DIN 69880) Tailstock: quill diameter 70 mm, stroke 120 mm, MT 5 Dimensions & Capacities Footprint: approx. 2,600 x 1,915 x 1,730 mm Weight: approx. 2,200 kg Coolant tank: approx. 70 liters Fixed steady rest with rollers, guide diameter 10–115 mm Travelling steady rest with rollers, guide diameter 10–115 mm Three-jaw chuck Schunk Rota Splus 200-52 J 6, high precision Quick-change chuck with clamping lever, SSF 40/6 Ortlieb, collet 173 E Faceplate operation preparation, including speed monitoring with separately adjustable limit Tooling: fixed tool holders and driven tool holders Jaws / hard and soft Collets 173 E The machine was used for single-part production in prototype manufacturing. Low spindle run hours Available immediately.

Stanje: rabljeno, Gildemeister Italiana GD16 z LNS nalagalnikom za palice Bdodpfxjy D Nw Ts Agtjb

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.000 mm, premer struženja nad prečnim suportom: 480 mm, premer struženja: 650 mm, potovalna razdalja osi X: 480 mm, pomik po osi Z: 1.100 mm, hitro pomikanje X-os: 10 m/min, hitri pomik na osi Z: 17 m/min, Oprema: transportni trak za ostružke, Gildemeister CTX 600 CNC Lathe – well maintained, inspected & ready for operation For sale is a Gildemeister CTX 600 CNC lathe in well-maintained and technically flawless condition. The machine has been regularly serviced and is in good condition both visually and mechanically. It is fully functional, tested, and immediately ready for use. With our all-inclusive service package, we personally handle the entire process for you upon request – from delivery to commissioning of your new machine. This includes unloading, positioning, and aligning the lathe. Our experienced service technicians then carry out professional commissioning, perform all necessary functionality tests, and ensure that your Gildemeister CTX 600 operates reliably and with precision. Additionally, we offer customized training for your staff to ensure optimal utilization of the machine right from the start. Even after installation, we are available to assist you – whether for maintenance, technical questions, or future upgrades. With our all-inclusive package, you don’t have to worry about anything – we ensure everything runs smoothly so you can focus entirely on your production. Optionally, you can purchase extraction systems, attachments, and accessories from us, including high-quality Donaldson extraction units to make your production even more efficient and clean. Our service commitment: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians specialized in Gildemeister machines, as well as other brands. We attach great importance to personal support and are happy to assist you at any time after your purchase. You also have the opportunity to view and test the machine under power at our facility at any time. You are warmly invited to see the condition and functionality for yourself on site. Bdjdpfx Agjy Ivfletjb With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Delovne ure: 39.836 h Rezane ure: 10.495 h Število osi: 8 Število vreten: 2 GLAVNO VRETENO Premer palice: 20 mm Hod: 80 mm Hitrost vretena: 10.000 vrt/min Moč vretena: 3,7 kW Natančnost razdeljevanja C-osi: 0,001° PROTIVRETENO Premer palice: 20 mm Z-hod: 300 mm X-hod: 240 mm Bedpjy Ht Ihefx Agtedb Hitrost vretena: 10.000 vrt/min Moč vretena: 3,7 kW Natančnost razdeljevanja C-osi: 0,001° NOSILEC VODILNE PUŠE Število pozicij: 11 Število motoriziranih pozicij: 5 Hitrost vrtenja orodja: 6.000 vrt/min X-hod: 50 mm Y-pomik: 350 mm Avtomatski podajalnik palic IEMCA BOSS 332 E 32N (2010)