Gieseking Mit Wasserkühlung nakup rabljenega (8.772)

Stanje: dober (rabljeno), Container turning device, welding turning device, roller stand, rotators, pipe straightening machine, shaft straightening machine - Pipe straightening machine for: steel pipes or shafts, with flame and water cooling for flame straightening - Drain channel and water pump - 2x: counter holder prisms - Counter bearing: adjustable Iedpfx Aoctmvzea Uear - Dimensions: 4000/870/H810 mm - Net weight: 500 kg

Stanje: novo, Hiwin LMFA54 linearni motor – primarni del z železnim jedrom in vodnim hlajenjem, SN: 61961 – dolžina kabla: 95 cm, neuporabljen v odprti originalni embalaži, 100% delujoč, dobava po slikah. Iaodex Dubnopfx Aa Ujr

Stanje: novo, Hiwin LMFA54 linearni motor – primarni del z železno sredico, vodno hlajenje SN: 61960 – dolžina kabla: 95 cm, nerabljen v odprti originalni embalaži, 100 % funkcionalen, obseg dobave po fotografijah. Iodpfx Aaex Dubhs Uoar

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 15.020 km, moč: 134 kW (182,19 KM), prva registracija: 07/1993, vrsta goriva: dizel, lastna masa: 7.520 kg, konfiguracija osi: 4x4, medosna razdalja: 3.800 mm, naslednji pregled (TÜV): 07/2026, gorivo: dizel, vrsta prenosa: mehanski, vzmetenje: jeklo, Leto izdelave: 1993, Odlično stanje S TÜV Dolžina za nadgradnjo ca. 3,60 m 4x4 pogon na vsa kolesa Listnato vzmetenje Avstrijsko vozilo Iodoyzrp Hepfx Aa Uoar Originalno le 15.020 km Popolno za predelavo v avtodom

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other Iaedpfx Aaoh R Taqj Uor - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments Ijdpfx Ajmhhy Nja Ujar - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: zelo dobro (rabljeno), Nizkotemperaturni kotel Viessmann Vitoplex/105kw z oljnim kotlom Iaodpfjwauaxsx Aa Usr

Leto izdelave: 2026, stanje: novo, Our KVK 1A is an almost identical sister model to the KVK 2 (MA), meaning it is a semi-automatic stretch wrapper with a turntable. In comparison to the KVK 2 MA, it is equipped with a recess that allows for ground-level loading with a manual pallet truck. The only operations that must still be performed manually on this wrapper are attaching and cutting the film. Ijdpfx Aey Drhzea Ujar Weighing 700 kg, this model is also designed for professional use and has a load capacity of up to 1,500 kg. The 1A features a 1,500 mm turntable and, as standard, can wrap pallets up to 2,400 mm in height. Both turntable and film carriage speeds are adjustable, and the very finely adjustable electromagnetic brake is controlled via potentiometer, allowing you to tailor the automated wrapping process perfectly to your product. Automatic pallet detection via photocell comes as standard, as do adjustable top and bottom wraps. Wrapping programs are available for "up only," "up & down" (cross wrapping), and "weatherproof" modes. The machine can also be operated manually if required. If the wrapper needs to be relocated temporarily, it can be easily lifted and moved by forklift via integrated cutouts. In addition to a photocell for detecting dark packages or black film, the KVK 1A offers an optional variable wrapping height of up to 3,200 mm. Recommendation: The KVK 1A is ideal where ramps cannot be used due to space constraints or when particularly heavy or unstable goods should not be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Leto izdelave: 2026, stanje: novo, Our KVK 1A is an almost identical sister model to the KVK 2 (MA), meaning it is a semi-automatic stretch wrapper with a turntable. In comparison to the KVK 2 MA, it is equipped with a recess that allows for ground-level loading with a manual pallet truck. The only operations that must still be performed manually on this wrapper are attaching and cutting the film. Weighing 700 kg, this model is also designed for professional use and has a load capacity of up to 1,500 kg. The 1A features a 1,500 mm turntable and, as standard, can wrap pallets up to 2,400 mm in height. Both turntable and film carriage speeds are adjustable, and the very finely adjustable electromagnetic brake is controlled via potentiometer, allowing you to tailor the automated wrapping process perfectly to your product. Automatic pallet detection via photocell comes as standard, as do adjustable top and bottom wraps. Wrapping programs are available for "up only," "up & down" (cross wrapping), and "weatherproof" modes. The machine can also be operated manually if required. If the wrapper needs to be relocated temporarily, it can be easily lifted and moved by forklift via integrated cutouts. In addition to a photocell for detecting dark packages or black film, the KVK 1A offers an optional variable wrapping height of up to 3,200 mm. Iaedpey Drfyjfx Aa Ujr Recommendation: The KVK 1A is ideal where ramps cannot be used due to space constraints or when particularly heavy or unstable goods should not be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Generalno obnovljeno, na zalogi, garancija 12 mesecev, brez raztapljalnih peči! -maks. temperatura 250 °C -skupna parna prostornina 20,5 m³ -uporabne mere (D x Š x V) 2300 x 2750 x 2200 mm -krmiljenje Jumo Imago 500 -grelna moč 36 kW -maks. obremenitev pečnega vozička 6000 kg, električni pogon -električne dovodne in odvodne lopute Belimo -odvodni ventilator krmiljen preko frekvenčnega pretvornika -postavitvena mera (D x Š x V) 3000 x 3000 x 3125 mm + tir pred pečjo -lastna teža cca 3500 kg -prosto stoječa stikalna omarica Iasdpfjttbf Uox Aa Uer -dokumentacija -električno preizkušeno in z aktualnim DGUV-merilnim protokolom Ogled v naši skladiščni hali po dogovoru. Vozičkasta peč, peč, peči, industrijska peč, krožna peč, komorna krožna peč, površinska peč, toplotna peč, sušilna peč, temperaturna peč, komorna peč, sušilna omara,

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: nepreverjeno, premer valja: 50 mm, širina valja: 930 mm, kotalkanje nagibanje: 70 mm, skupna širina: 1.000 mm, skupna višina: 900 mm, skupna dolžina: 15.000 mm, transportna dolžina: 15.000 mm, gradbena višina: 900 mm, višina osnovne plošče stroja: 200 mm, razmak med vrstami: 90 mm, razmak osovin: 90 mm, skupna masa: 3.500 kg, delovna širina: 1.000 mm, dolžina segmenta: 3.000 mm, nosilnost: 100 kg, Lippert valjčna proga z pogonom Nerabljena Isdpfjxu Nggex Aa Usar 1x 6 m 1x 9 m Lenze pogonski motor z reduktorjem 7 nog S krmiljenjem za vožnjo naprej in nazaj, vključno z zasilnim izklopom 16A vtikač

Stanje: novo, For sale: ALU plates with certification from surplus stock and remaining inventory. Isdpjw Skr Tefx Aa Ujar * - Description: ALU / AlMg4.5Mn (5083) with certificate -----2x----- - Aluminium rectangular plate / AlMg4.5Mn (5083) with certificate - Length: 2205 mm - Width: 2504 mm - Height: 60 mm - Weight per plate: 911 kg - Purchase price per plate: €5,374.90 | €5.90/kg * - Sales price per plate: €2,687 / negotiable * -----2x----- - Aluminium rectangular plate / AlMg4.5Mn (5083) with certificate - Length: 2205 mm - Width: 2504 mm - Height: 70 mm - Weight per plate: 1,063 kg - Purchase price per plate: €6,271.70 | €5.90/kg * - Sales price per plate: €2,687 / negotiable * * Prices quoted are net, VAT excluded. * The material comes from surplus stock and remaining quantities and can also be purchased individually. * IMPORTANT: Please note that, for logistical reasons, we currently only sell within Europe. This means that all purchases and transactions are limited to customers within this geographic area. * "The seller excludes any warranty for the purchased goods. The goods are sold as is, without guarantee for fitness for a particular purpose or freedom from defects. The buyer confirms that they have inspected the goods prior to purchase and are satisfied with their condition. The seller accepts no liability for any damages arising from the use of the goods. All claims by the buyer against the seller are excluded." * Status: 14.04.2026 * For questions or further information, I am always at your disposal.

Stanje: skoraj kot novo (rabljeno), prva registracija: 12/2023, Leto izdelave: 2023, obratovalne ure: 160 h, Hladilnik za hidravlično olje Zaščita cevi visoke zmogljivosti LED luč na iztegljivem nosilcu Hitri priklop MS01 Serijska oprema stroja: širina 710 mm / 1.100 mm raztegnjena Gumijaste gosenice 180 mm Dvojno delujoča dodatna hidravlika Dve hitrosti vožnje CE-certifikat Iasdpfx Aaox Tn Upe Ujr Ta ponudba ni zavezujoča, brez jamstva za podrobnosti o opremi. Pridržujemo si pravico do napak, sprememb in vmesne prodaje!

Stanje: novo, Cantilever Racking New, H: 400 cm, Base + 3 Storage Levels with Roof & Rear Wall Delivery: Free delivery within Germany (except islands) Specifications: - Height: approx. 400 cm - Depth: approx. 147 cm - Length: approx. 1,420 cm - Cantilever Arms: approx. 125 cm - Axle spacing: 290 cm (can be customised on request) - New units – made in Germany - Delivery time: approx. 6 weeks after clarification of commercial details - Load capacity: 1,000 kg per arm - Load capacity: 4,000 kg per upright - Uprights hot-dip galvanised - Cantilever arms hot-dip galvanised - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 3 storage levels (4 storage levels total) Scope of delivery: - 06 x uprights, incl. base, approx. 400 cm, made from IPE270 - 18 x cantilever arms, approx. 125 cm, made from IPE120 - 06 x roof beams, approx. 150 cm, made from IPE120, with 5° roof pitch - Incl. roof and rear wall material - Incl. all required fastening elements and bolts Why choose BLT cantilever racking? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All specified load capacities for uprights and arms are statically proven at 100% load - All racks supplied hot-dip galvanised. Can be used indoors or outdoors and do not corrode like painted systems. Uniform appearance for many years - We use only legally prescribed hot-dip galvanised bolt sets according to DIN EN 15048-1 - Long-term availability of spare parts - Upright base and rear are welded together for extra safety and faster installation—no need to bolt base to rear - Bracings made from angle steel, eliminating adjustment with turnbuckles and reducing assembly time - No elongated hole system—no weakening of upright profile Price: €12,250.00 net plus statutory VAT You will receive an invoice with VAT shown Assembly: Our trained personnel will gladly assist with professional assembly and dismantling of your workshop equipment if required Our recommendation: Ijdpfx Aaoy A N Ics Ujar Let us know your requirements... We are happy to support you from planning and ordering to installation of your project

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, nosilnost na konzolno roko: 140 kg, višina police: 2.500 mm, skupna dolžina: 3.150 mm, skupna višina: 2.500 mm, razmak osovin: 1.030 mm, nosilnost na stojalo: 1.120 kg, Approx. 3.15 linear meters cantilever racking with shelf panels, 60 cm deep, height: 250 cm, 140 kg/arm, META Multistrong Specifications: - Height: approx. 250 cm - Depth: approx. 81 cm - Length: approx. 315 cm - Cantilever arms: approx. 60 cm - Axial dimension: 103 cm - NEW, available immediately from stock. - 140 kg load capacity per arm - 1120 kg load capacity per upright - Uprights in RAL5010 (gentian blue) - Cantilever arms in RAL5010 (gentian blue) - Arms are hooked in and secured with locking pins Iodpfx Aaey A N E Is Uoar - Arm height adjustable in 70 mm increments - Levels: base + 4 storage levels (total of 5 storage levels) The rack consists of: - 4 x uprights, including base, approx. 250 cm, made from IPE120 - 16 x cantilever arms, approx. 60 cm, rectangular profile 40 x 30 mm - 12 x META shelf panels, approx. 100 x 60 cm - Includes all necessary connecting elements and bolts -- Immediately available -- Price: €1,765.00 net €2,100.35 gross You will receive an invoice showing VAT separately. Accessories such as floor anchors, impact protection, etc. can also be purchased from us. Transport: Delivery is provided upon request by our partner freight company; shipping costs depend on your postcode. Assembly: Our trained staff are happy to assist you with the professional assembly and dismantling of your warehouse equipment. Our recommendation: Let us know your requirements... We are happy to help you realize your projects—from planning and ordering to assembly.

Stanje: novo, Leto izdelave: 2026, Recirculating chamber furnace, electric, new unit, delivery time 12 weeks - Temperature: 300°C - Internal dimensions (WxDxH): 1500 x 3000 x 2000 mm - External dimensions (WxDxH): 2410 x 3560 x 2730 mm - Volume: 9,000 liters - Control: Eurotherm Nanodac, 100 programs with 25 segments each Ijdpfxolkb Ezj Aa Usar Another 100 programs can be stored/loaded via FTP or USB flash drive - 2 pcs. circulating air fans - Double door with safety door sensors - Overtemperature protection, Eurotherm 3216i - Controller/recorder with color touchscreen display - Robust steel construction, exterior in anthracite - Motor-driven dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Loading tracks, recess for wheeled loading trolley - Documentation, CE declaration of conformity - Electrical circuit diagram with spare parts list Transportation, installation, and staff training can be offered upon request. This new unit is also available with exhaust air fan and other configurations! Delivery time approx. 10–12 weeks. Contact us! We offer new and used industrial furnaces, which we can also modify and retrofit according to customer requirements. Inspection in our machine hall is possible at any time by appointment. Furnace, ovens, drying oven, industrial oven, drying cabinet, heat oven, heat cabinet, recirculating oven, chamber oven, heating oven, chamber recirculating oven, annealing oven, tempering oven.

Stanje: nepreverjeno (rabljeno), Volume: Approx. 6000 L Type: Vertical, standing on three legs Tank diameter: 2250 mm Heatable/coolable double jacket Isdpshg Nk Dofx Aa Usar Enamelled tank

Stanje: nepreverjeno (rabljeno), Volume: approx. 6000 L Type: vertical, supported on three legs Iasdehg Niqopfx Aa Ujr Tank diameter: 2250 mm Heatable/coolable double jacket Enamelled tank

Stanje: nepreverjeno (rabljeno), Volume: Approx. 5000 L Type: Vertical, standing on three legs Tank diameter: 2100 mm Heatable/coolable double jacket Iedpfxjhg Nlpo Aa Uoar

Stanje: dober (rabljeno), 1x Arburg 320C 500-170 z Multiliftom, zaščitno ograjo in odlagalnim trakom. Prodaja brez Z-transportnega traku, temperirnih naprav in Koch sesalca. Stroj je po dogovoru hitro na voljo. Ijdjyym Saspfx Aa Usar

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stair Stringer Milling Device SCHEER TW 4 + Router HM 16 Everything is in visually and technically excellent, as-new condition, the machine has been used very little. Everything works perfectly. You can start working with it immediately. All machines are intended for professional/commercial use, not hardware store junk. Stair Stringer Milling Device SCHEER TW 4 With this device, you can mill steps and risers very precisely and accurately. The hand crank even allows you to process curved end faces; you can also use it for milling cutouts in other panel materials, for example, kitchen worktops. Equipped with hardened guide shafts, on which the cross slide with the router is mounted. With ball bearing guide bushings, allowing the device to be moved very easily, accurately, and safely. The machine can be securely clamped to the stringer or similar workpieces with 4 screw clamps. The cross slide features two stops each for both longitudinal and transverse directions. Comes with two positioning angles. Includes user manual, tools, and all accessories. The milling travel in the longitudinal direction is 750 mm; in the transverse direction, the milling travel has been increased from 75 mm to 320 mm, which has significantly expanded the possible uses of the machine. To increase the milling travel, a new base frame made of aluminum profiles had to be built. The modification work was carried out by a reputable mechanical engineering company. Everything works perfectly; this machine is truly unique. Router SCHEER HM 16 Very good condition, with only minor signs of use. Extremely robust due to the triple-supported milling spindle. Isdpfx Aasyxr T Tj Ujar Precise concentricity and flawless milling finish. Accurate column guide and torsion-resistant milling table. Constant speed even under heavy load. With high-performance motor (virtually no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. This machine is suitable for the heaviest continuous milling operations. Good visibility of the milling shaft; chips are blown away by a strong fan. 220V, 1800W Speed: 18,000 rpm Works flawlessly. With M16 IG tool holder.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Cell with Kuka KR 180 Grinding Robot Grinding cell Berger 2012 (External grinding A1) - Total weight approx. 6,300 kg - Cell dimensions: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of manufacture: 2011 - KRC 4 control system Ijdpfsg Saqvex Aa Usar - Additional axis (7th axis) Belt grinding station BSS10 - Max. belt dimensions 3500 x 30 mm - Max. contact wheel diameter 200 mm - Motor power 4 kW 2 x polishing stations - Polishing wheel diameter 350 - 600 mm - Power 5.5 kW Gripper exchange cabinet Interoll Automation GmbH belt conveyor - Total length approx. 2000 mm - Belt width approx. 440 mm The price includes a complete concept as shown in the video. We have 4 such cells available. It is possible to manufacture each detail as seen in the video.

Stanje: zelo dobro (rabljeno), Buderus 455 kW. Olje. Rezervno ogrevanje. Nizkotemperaturni kotel, možna tudi uporaba gorilnika na bioplin. Isdox U Exujpfx Aa Ujar

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, 0,33 l paket 24 kosov 0,5 l NRW Isdpeyry H Hofx Aa Ujar 0,5 l z zamaškom na vzvod 0,7 l

Stanje: novo, Leto izdelave: 2026, Recirculation chamber furnace, electric, new unit, delivery time 12 weeks Iaedpfx Aaev Hg Euo Ujr - Temperature: 250°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Volume: 8,820 liters - Control: Eurotherm Nanodac (controller/recorder with color touch display) - 2 circulating air fans - Double doors with safety door sensors - Overtemperature protection: Eurotherm 3216i - 2 fresh air fans - Automatic dampers - Electrical design: 400 V / 50 Hz / 3NPE - Increased heating capacity: approx. 70 kW - Temperature accuracy: +/- 6 K in empty furnace - Documentation, CE declaration of conformity - Electrical wiring diagram with spare parts list Note: The furnace floor is not insulated, but only covered with stainless steel sheet, allowing unobstructed access with any track gauge. Optionally, the floor can be supplied insulated (with entry rails to be defined by the customer). We offer new and used industrial furnaces, which we can also retrofit and customize according to customer requirements. Furnace, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heat cabinet, recirculation oven, chamber oven, preheating oven, chamber recirculation oven, tempering oven, annealing oven.