Frt Prenosni Optični Profilometer nakup rabljenega (553)

Stanje: zelo dobro (rabljeno), Here we offer you an FRT MicroSpy Mobile. Device designation: FRT MicroSpy Mobile Art. No. MSP 105 00 Device number: MSP1033 FRT MicroSpy Mobile Portable Optical Profilometer for non-destructive 3D surface measurements directly on the component. The MicroSpy Mobile is ideally suited for mobile use thanks to its portability, making it perfect for onsite measurements on heavy machinery, vehicles, rollers, glass panes, or other large components. This enables high-resolution, non-destructive measurements of key surface characteristics such as roughness, contour, topography, layer thickness, wear, bearing ratio, or volume directly onsite. Smaller samples can be measured directly on the measuring table. Suitable for use on large construction and machine parts Excellent resolution values Outstanding reproducibility Non-destructive measurement Handles and adjustable support feet Low weight (approx. 5 kg) FRT Technical Specifications: Device: MicroSpy Mobile XY range: 50 x 50 mm² XY Table Type: compact XY cross table with open frame Bearing: mechanical crossed roller guide Drive: DC motor with ball screw Travel (measurement area XY): 50 x 50 mm² (or 20 x 20 mm² with CWL 3mm) Position measuring system: rotary encoder System resolution: 0.25 µm XY-repeatability: < ± 1 µm Table deviation per axis: < 2 µm / 50 mm (non-reproducible part: < 0.5 µm) XY squareness: < 4 µm / 50 mm Z-axis, motorized: Type Bearing Drive Travel Position measuring system System resolution Axis play Manual coarse adjustment: Type: dovetail guide with fine adjustment Hnedpfxozdnqcs Abnor Adjustment range: 25 mm Measurement: Minimum point spacing XY: 1 µm Sample size: - Sample weight: - Minimum measuring speed: 1 µm / sec Maximum measuring speed: 50 mm / sec Complete system: Total weight: approx. 150 kg Measuring setup: approx. 5 kg System footprint: approx. 0.3 x 0.3 m² Control unit dimensions (W x D x H): approx. 0.65 x 0.65 x 1.0 (1.6) m³ Power supply EU version: 110 - 240V, 50 - 60Hz, up to 16A Power supply US version: 110 - 240V, 50 - 60Hz, up to 16A Power consumption: typically 300-400 W Compressed air supply: - Ambient temperature: 22°C ± 5°C Temperature stability: < 0.5°C/h Ambient conditions: measuring room Scope of delivery: 1 x XY table with 50 x 50 mm² travel 1 x Mobile sub-frame with electronics 1 x Chromatic sensor FRT CWL 600 µm 1 x Electronics for chromatic sensor 2 x Keys for computer 2 x Keys for back door 1 x Cold appliance cable for main supply 1 x Mouse (PS/2) 1 x Keyboard 1 x 19'' TFT monitor Type: FRT MicroSpy Mobile Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen,

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, skupna dolžina: 350 mm, skupna širina: 605 mm, skupna višina: 1.080 mm, vhodna napetost: 230 V, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 70 mm, širina območja skeniranja: 70 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The mobile LAS 23 portable laser is distinguished by its compact design. Small, handy, and equipped with custom-made attachments that can be individually exchanged using a quick-change system. Its mobile base allows it to be conveniently moved to the workpieces to be marked. This makes it suitable for both large and heavy as well as small workpieces. The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks and without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after the initial setup. Additionally, it can read data (such as variable information like drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. Using a handheld scanner is also possible. Made in Germany • Fiber laser 20W (optional: 30 Watt, 50 Watt) • Laser class 1 • CE compliant, according to EU regulations • Wavelength 1064nm • Marking field size 70x70mm (optional: 110x110mm) • Status signal light (integrated in handheld unit) • Marking software EZCAD • Connection 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 45 kg • Weight of portable laser unit (handpiece): 2.8 kg • Fiber optic cable: approx. 2.50 m • Integrated extraction system Hjdpfxeu Smcbo Abnonr

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, vhodna napetost: 230 V, merilno območje os X: 200 mm, merilno območje osi Y: 85 mm, merilno območje os Z: 50 mm, skupna širina: 483 mm, skupna dolžina: 598 mm, skupna višina: 464 mm, skupna masa: 64 kg, vhodni tok: 5 A, natančnost ponavljanja: 0,005 mm, vhodna frekvenca: 50 Hz, Oprema: CE označba, Na voljo je tipska ploščica, USB priključek, dokumentacija / priročnik, PG1000-400 – optični sistem za kontrolo geometrije rotacijskih rezilnih orodij PG1000-400 je profesionalni optični merilni in kontrolni sistem za hitro preverjanje geometrije rezilnih orodij. Namenjen je proizvajalcem orodij, brusionicam, orodjarnam, CNC obratom ter oddelkom za kontrolo kakovosti in meroslovje. Glavna uporaba je kontrola rotacijskih rezilnih orodij po izdelavi, brušenju, ostrenju ali obnovi. Sistem je primeren za HSS in monolitna karbidna orodja, zlasti svedre, končne rezkarje, stopničaste svedre, povrtala, narezovalce, profilna orodja, mikro orodja ter specialna orodja po naročilu. Napravo je mogoče uporabiti tudi za kontrolo ploščic VBD, izbranih navojev, vijakov / zatičev in drugih natančnih delov, če je kontrolirana geometrija optično dostopna s kamero. Primarna namembnost sistema je kontrola geometrije rezilnih orodij. Tipične uporabe: - medoperativna kontrola neposredno ob brusilnem stroju ali v proizvodnji - vhodna in izhodna kontrola orodij - kontrola po ostrenju / brušenju - dokumentacija kakovosti in merilni protokoli - ponavljajoča kontrola serijsko izdelanih orodij PG1000-400 omogoča kontrolo npr.: - hrbtni in čelni kot - kot vijačnice (helix angle) - konični kot pri svedrih - radije in kotne radije - premer in razdalje - dolžino rezalnega roba (length of cut) - širino pasu, robne širine, fazete - debelino jedra (web thickness) - profil orodja - tirnost / radijalni udar - stanje in obraba rezilnega roba - primerjava geometrije z DXF/DWG risbami Sistem deluje optično in brezkontaktno. To je prednost pri pregledu ostrih rezil, fine mikrogeometrije, prevlečenih in preciznih orodij, kjer so pomembni hitrost, ponovljivost in zmanjšanje vpliva operaterja. Sestavni del sistema je programska oprema REACTION, namensko razvita za kontrolo rezilnih orodij. Programska oprema omogoča več kot 50 merilnih funkcij, zaznavanje robov, pripenjanje merilnih točk na robove, shranjevanje kontrolnih scenarijev, primerjavo z DXF/DWG geometrijo, PDF protokole z oceno PASS/FAIL in izvoz podatkov v Excel/CSV. Tehnične specifikacije: - priporočljiv premer orodja: 0,635–75 mm Hnedpfx Abezdz S Toner - merilna dolžina orodja: cca 190–200 mm - razpon povečav: 12,5× do 145× - kamera: 5 MP - monitor: 27" 4K Ultra HD - merilno območje: 85 mm vertikalno × 200 mm horizontalno - natančnost / ponovljivost: ±5 µm pri maksimalni povečavi - dimenzije naprave: cca 598 × 483 × 464 mm - masa: cca 64 kg Ponujena konfiguracija: - PG1000-400 optični sistem za kontrolo rezilnih orodij - M/F/A enkoderji - PC s programsko opremo REACTION - 27" 4K Ultra HD monitor - prilagodljiva LED osvetlitev z difuzorjem - ukrivljena magnetna difuzijska plošča - rotacijski osnovni blok za vpenjalne priprave - 1000-026-5"-ASS – 5" V-block z vložkom, zgornjim pritiskom in ustavljalcem - osnovno daljinsko usposabljanje operaterja O proizvajalcu: PG1000 temelji na dolgoletnem razvoju sistemov za kontrolo rezilnih orodij. Prva generacija PG1000 je bila predstavljena leta 1993. Sistem proizvaja podjetje PG Inspection Technologies LLC v ZDA, specializirano za to linijo izdelkov. Od leta 1996 je bilo dobavljenih več kot 1000 sistemov PG1000. Stanje in dostava: - nov stroj - letnik: 2026 - garancija: 12 mesecev - lokacija: Češka republika / EU - dostava, pomoč pri zagonu in usposabljanje po dogovoru - CE oznaka in ustrezna EU dokumentacija Naprava se ponuja prek evropskega zastopnika proizvajalca. Prodaja, tehnična podpora, zagon, garancijski in pogarancijski servis so zagotovljeni iz Evropsk

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Na voljo je večpostajni transferni stroj Riello z vrtalnimi in rezalnimi enotami. Horizontalne delovne enote: 2x vrtalne enote, 2x enote za rezanje navojev, 1x kombinirana enota. Radialne delovne enote: 1x vrtalna enota, 1x enota za rezanje navojev, 1x kombinirana enota. Hod pinole: 100 mm, vreteno: SK40, tip rotacijske mize: TG 320, revolverske postaje: 5, premer vpenjalne glave: 200 mm, hodi čeljusti: 12 mm + 12 mm, razdalja med vpenjalnim nosilcem in sredino vpenjalne glave: 225 mm, skupna priključna moč: 23 kW. Dimenzije stroja X/Y/Z: pribl. 3700 mm / 3400 mm / 3050 mm, teža: pribl. 5800 kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Hodpfx Aboytgpwsnenr

Stanje: pripravljen za uporabo (rabljen), Na voljo je optični sistem za merjenje slike Keyence. Merilne dimenzije X/Y: 100 mm/200 mm, merilna natančnost pri L/100: +/-2µm, kamera: CMOS. Vključuje merilno mizo/podstavek, kalibracijsko šablono, računalnik in dodatno opremo. Dokumentacija je na voljo. Možen je ogled na lokaciji. Hjdpfx Aexu I A Hsbnsnr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Na voljo je horizontalni CNC krožni transferni stroj Sinico za obdelavo cevi in palic. Zmogljivost: cca 2500 kosov/uro, največja rezalna kapaciteta: 81 mm, največja dolžina obdelovanca: 340 mm, največji premer cevi: 81 mm, največji premer palice: 40 mm, orodjna glava: HSK-63, teža stroja: cca 16.000 kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Hnsdpfx Aoy Nm U Tsbnor

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), An optical inspection machine by Bizerba for label and seal inspection on packaging lines is available. Camera technology: dual-camera configuration, camera placement: top and bottom, conveyor belt speed: 90m/min, machine dimensions (L/W/H): approx. 2100mm/900mm/1600mm, weight: approx. 600kg. Documentation is available. On-site inspection is possible. Hsdpfxow Duvzj Abnenr

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Resolution X/Y (3D and 2D): 21μm/10.5μm, Illumination: multispectral, multidirectional, Component clearance above/below PCB: 40mm/100mm, Max. inspection speed: 50cm²/s, Inspection area X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, Weight: approx. 500kg, Software: OptiCon Pilot 5.3. Includes calibration tool, manuals, camera, lighting units, and repair software for error visualization. Computer was replaced in 2012. Documentation available. Hnodpotz Dkyjfx Abnor

Stanje: pripravljen za uporabo (rabljen), Components per hour: 480,000, image field dimensions (FOV): 61.1 x 44.9 mm², PCB dimensions: 50–533 x 50–609 mm, PCB thickness: 0.5–4 mm, max. PCB weight: 3 kg, clamping clearance for PCB clamping: 3 mm, component clearance under the camera: 34 mm, component clearance under the PCB: 60 mm. Length: 1110 mm, width: 1351 mm, height: 1892 mm, weight: 900 kg. Without loader and unloader. On-site inspection is possible. Hjdpfx Abowb E Sbjnenr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Na voljo je horizontalni CNC krožni transferni stroj Sinico za obdelavo cevi in palic. Produktivnost: cca 2500 kosov/h, maksimalna zmogljivost rezanja: 110 mm, maksimalna dolžina obdelovanca: 350 mm, maksimalni premer cevi: 81 mm, maksimalni premer palice: 40 mm, vpenjanje orodja: HSK-63, teža stroja: cca 16.000 kg. Stroj ima neznano napako. Dokumentacija je na voljo. Možen je ogled na mestu. Hjdjy Nm U Hepfx Abnsnr

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 140 kg, skupna dolžina: 900 mm, skupna širina: 800 mm, skupna višina: 2.000 mm, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of lasers has become indispensable in many industries. The powerful laser software enables the creation of text, numbers, 2D codes, QR codes, and logos with just a few clicks and little programming knowledge. The software automatically increments serial and article numbers as preset. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically insert them into predefined fields. Using a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optional larger) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal light for operating status display • Max. workpiece height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile Hsdpfx Abexuvk Esnsnr • Air-cooled • Door width approx. 700mm / door height (pass-through): 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 2000 mm (LxWxH) • Weight: approx. 120 kg

Stanje: dober (rabljeno), Koda: 0445 Znamka: LANDONI – ITALIJA Model: AGM 1 – v skladu s standardom CE Prenosna električna žaga za razrezovanje in deljenje pakiranih desk in hlodov – v skladu s standardom CE. Ta naprava za razrezovanje je primerna tudi za rezanje zvitkov papirja s posebno verigo Widia ter za rezanje plastičnih blokov ali cevi. Tehnični podatki: Veriga z ravnimi zobmi, tip DLC, z delitvijo 1". Napenjalnik verige za samodejno napenjanje verige. Dolžina vodila cm 240. Uporabna dolžina reza cm 200. Električni motor, moč 12,5 KM, trifazni. Samodejno mazanje verige. Hodpfxozl Dn Hs Abnonr Celotne dimenzije: 1800 x 900 x 3000 mm (v x š x d). Dimenzije za transport: 3900 x 900 x 1900 mm (v x š x d). Teža: 300 kg.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, skupna dolžina: 350 mm, skupna širina: 605 mm, skupna višina: 1.080 mm, vhodna napetost: 230 V, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 70 mm, širina območja skeniranja: 70 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The mobile LAS 23 portable laser is distinguished by its compact design. Small, handy, and equipped with custom-made attachments that can be individually exchanged using a quick-change system. Its mobile base allows it to be conveniently moved to the workpieces to be marked. This makes it suitable for both large and heavy as well as small workpieces. The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks and without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after the initial setup. Additionally, it can read data (such as variable information like drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. Using a handheld scanner is also possible. Made in Germany • Fiber laser 20W (optional: 30 Watt, 50 Watt) • Laser class 1 Hnedeznr Umspfx Abnor • CE compliant, according to EU regulations • Wavelength 1064nm • Marking field size 70x70mm (optional: 110x110mm) • Status signal light (integrated in handheld unit) • Marking software EZCAD • Connection 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 45 kg • Weight of portable laser unit (handpiece): 2.8 kg • Fiber optic cable: approx. 2.50 m • Integrated extraction system

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, visokozmogljiva rotacijska strojna postaja, zasnovana posebej za serijsko proizvodnjo srednje velikih in velikih komponent. Zahvaljujoč krajšim proizvodnim časom, visoki natančnosti in zanesljivosti prispeva k večji učinkovitosti v sektorju strojne obdelave: omogoča do 15 različnih operacij obdelave, vključno s prečnimi ali čelnimi operacijami obdelave na obeh straneh. Hjdoznnpmopfx Abnenr

Stanje: pripravljen za uporabo (rabljen), Telezentrische Messmaschine, optische Messmaschine, Teilemessmaschine, Profilprojektor, Gebrauchtmaschine Abmessungen: Länge: 910 mm Breite: 700 mm Höhe: 2.100 mm Gewicht: 155 kg Elektrische Daten: Spannung: 230 V Frequenz: 50 Hz Werkstückspannbereich: 0–230 mm Kameras: Hnodpfxsu T I Eds Abnjr Hersteller: Cognex Corporation Modell: 821-0034-1R Rev B Hersteller: Vision Control Modell: T201/0.12 Anwendungsbereiche: Diese Maschine eignet sich ideal für die präzise Vermessung und Qualitätskontrolle von Werkstücken, insbesondere in Branchen, in denen eine hochgenaue Maßprüfung und Fehlererkennung unerlässlich sind (z. B. Automobilindustrie, Elektronikfertigung, Produktionslinien). Die fortschrittliche Bildverarbeitungstechnologie der Kameras von Cognex und Vision Control gewährleistet eine schnelle und zuverlässige Vermessung.

Stanje: rabljeno, FHS Roller Conveyor Transversal Transfer Pusher 90° 4300-510-450 RA1960 Manufacturer: FHS Direction of movement: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm / 650 mm with chain deflection Length: 4300 mm 2x transfer pushers Pusher width: 1500 mm Roller diameter: 50 mm Roller pitch: 75/100/125 mm Conveyor and pusher motor: SEW motor 300-500V Frame height: 140 mm / 250 mm with chain deflection Conveying speed: Infinitely adjustable with frequency inverter Scope of delivery: without supports, without side guides, 1x Movi-Mot frequency inverter, 5x light barriers Optionally available: Single-sided and double-sided side guides Supports For individual and professional consultation, simply contact us. Get in touch with us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, The team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics. Hnedpfx Aek Abm Rsbnor

Stanje: dober (rabljeno), Leto izdelave: 1980, številka stroja/vozila: 622336, Ponudba 22681 Tehnični podatki: - Vrtalna zmogljivost v jeklu ST 60: 30 mm - Nastavek za vrtalno vreteno: MK 3 - Gib vretena: 160 mm - 9 vrtalnih hitrosti vretena: 90 – 1450 vrt/min - Izložek: 300 mm - Miza z 2 T-utori - Dimenzije mize: 400 x 450 mm - Največja razdalja med mizo in vrtalnim vretenom: 660 mm - Nastavitev višine z zobato letvijo in ročnim krmilom - Pogon: 400 V / 1,2 kW Hodpfjzp E Ucox Abnsnr - Potrebna površina: približno Š 600 x V 2100 x G 850 mm - Teža: približno 300 kg - Vključno z: - Vrtalno glavo - 10 kosov HSS – svedrov 8 – 20 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 200 mm, merilno območje osi Y: 200 mm, merilno območje os Z: 200 mm, teža obdelovanca (maks.): 15 kg, trajanje garancije: 12 meseci, vrsta vhodnega toka: Klimatska naprava, potovalna razdalja osi X: 200 mm, pomik osi Y: 200 mm, pomik po osi Z: 200 mm, vhodna napetost: 230 V, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, 3D Coordinate Measuring Machine Mahr MS2VT Used multisensor CMM with motorized zoom and active vibration isolation Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2025. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and application support. Delivery available with factory service or via forwarding agent, worldwide. Online or on-site demonstrations with customer parts on request, application consulting by accredited Profitech measurement laboratories during the project phase. Complete service: – Delivery, setup, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training and instructional programs available, including online courses. Rental, leasing, or financing possible directly through Profitech, no financial institution required. Measuring device can be individually configured to meet customer requirements. • Measuring range per individual sensor: 200x200x200mm • Dimensions: 900x750x950mm • Weight: approx. 170 kg • Accuracy: E2 = 2.4 + L/150 [µm] • Retrofit 2024 • incl. USB camera with fixed focal length • incl. LED ring light • incl. calibration standard • incl. dual-monitor operation Hsdpfxodz Er Rj Abnsnr • incl. new Windows 10 • incl. Opticheck3D 5.0 analysis software (12 months free software updates) Manufacturer's sample image (sister device)

Stanje: rabljeno, številka stroja/vozila: 7F001-7, Optični večsenzorski merilni stroj HEXAGON OPTIV CLASSIC 321 GL tp Letnik izdelave: predvidoma 2015 Številka stroja: 7F001-7 Razpoložljivost: takoj (po dogovoru) Način plačila: predplačilo – z nakazilom Interna številka: OCU2 Možnost ogleda v obratovanju: DA Tehnični podatki: Metrološka programska oprema: PC-DMIS Vision Optični senzor za brezkontaktno merjenje najmanjših in natančnih komponent CCD kamera s 6,5-kratnim motoriziranim CNC zoomom DC servomotorji Modularni menjalnik tipala: TESASTAR Linearni vodila v vseh osi Koaksialna LED zgornja luč (bela LED) LED zadnja luč (zelena LED + difuzor) Večsegmentna LED obročna luč Maksimalna hitrost premika v osi X, Y, Z: 160 mm/s Maksimalna teža obdelovanca: 20 kg Ločljivost merjenja: 0,05 µm Natančnost merjenja v osi X, Y (optični senzor): Ex, Ey = (1,6 + L/250) µm Natančnost merjenja v osi XY (optični senzor): Exy = (2,0 + L/250) µm Natančnost merjenja v osi Z (optični senzor): Ez = (3,9 + L/200) µm Natančnost merjenja v osi X, Y (kontaktni merilni sistem): Ex, Ey = (2,0 + L/250) µm Natančnost merjenja v osi XY (kontaktni merilni sistem): Exy = (2,5 + L/250) µm Natančnost merjenja v osi Z (kontaktni merilni sistem): Ez = (2,9 + L/200) µm Volumen merjenja, optični senzor: X 300 mm, Y 200 mm, Z 150 mm Volumen merjenja, kontaktni senzor: X 230 mm, Y 200 mm, Z 150 mm Obseg dobave: - Kot je prikazano na slikah Pomembno: Omara z roletnimi vrati, na kateri stoji računalnik, ni vključena v obseg dobave. Dimenzije in teže: Dimenzije (D x Š x V): približno 705 x 986 x 890 mm Teža: približno 170 kg ⚠️Dodatne informacije: Hsdpfx Abezk I T Rjnonr ►Izdelek se prodaja izključno z izjemo kakršnih koli garancij ►Tehnični podatki so podani brez jamstva za pravilnost ►Pridržujemo si pravico do predhodne prodaje ❗Prodaja izdelka je možna samo podjetjem❗

Stanje: rabljeno, Ta ponudba je za sistem za transfer Bio-Rad Trans-Blot Turbo 690BR. Naprava je v popolnoma delujočem stanju in pripravljena za takojšnjo uporabo. Trans-Blot Turbo je hitri sistem za prenos proteinov, zasnovan za prenos proteinov iz elektroforeznih gelov na membrane za Western blotting. Ponuja kompaktno in učinkovito rešitev za rutinsko analizo proteinov v laboratoriju. Informacije o programski opremi in medijih: Hjdpfx Absztpubjnsnr Ker gre za opremo, ki prihaja neposredno iz laboratorija, so vsi originalni mediji programske opreme ali dodatna oprema, ki so bili najdeni pri napravi, priloženi kot gesto naše dobrotljivosti. Obvestilo o licenciranju: Ne zagotavljamo, ne prenašamo in ne zagotavljamo veljavnosti licenc ali ključev programske opreme. Kupec je odgovoren za vsa dovoljenja, registracijo in združljivost programske opreme z delovno postajo, in sicer preko proizvajalca. Obvestilo o nabavi: Ta naprava se prodaja v stanju, v katerem je («as is»). Medtem ko preverjamo, ali se naprava vklopi in ali je fizično nepoškodovana, ne izvajamo analitične preveritve, testiranja pretoka tekočin ali operativne kalibracije. Idealno za laboratorije, ki imajo lastno tehnično strokovnost ali veljavne pogodbe o vzdrževanju. Vpliv na trajnostnost: Z izbiro možnosti neposredne ponovne uporabe se vaša ustanova izogne ogljičnemu odtisu, ki nastane pri novi proizvodnji, in prepreči, da bi specializirani materiali končali v odlagališčih odpadkov. Neposredna ponovna uporaba v laboratoriju je najučinkovitejši način, da opremite sodoben laboratorij, z vidika zmanjšanja ogljičnega odtisa.

Stanje: zelo dobro (rabljeno), Keyence Model: VR-5200 Type: Measuring Head Light Sources Observation light source: LED ring light (red, blue, green) Measurement light source: White LED Controller: VR-5000 Observation and Measurement Range Macro Mode Magnification (based on a 15-inch monitor) 12×: Horizontal 24.0 mm Vertical 18.0 mm Magnification (based on a 15-inch monitor) 25×: Horizontal 12.0 mm Vertical 9.0 mm Magnification (based on a 15-inch monitor) 38×: Horizontal 8.0 mm Vertical 6.0 mm Magnification (based on a 15-inch monitor) 50×: Horizontal 6.0 mm Vertical 4.5 mm Micro Mode Magnification (based on a 15-inch monitor) 40×: Horizontal 7.6 mm Vertical 5.7 mm Magnification (based on a 15-inch monitor) 80×: Horizontal 3.8 mm Vertical 2.9 mm Magnification (based on a 15-inch monitor) 120×: Horizontal 2.5 mm Vertical 1.9 mm Magnification (based on a 15-inch monitor) 160×: Horizontal 1.9 mm Vertical 1.4 mm Zoom 1× to 4× Height Measurement Measuring resolution 0.1 µm Height measurement range Without image composition in Z Macro mode: 10 mm Micro mode: 1 mm With image composition in Z Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without image composition in Z 0.4 µm With image composition in Z 1.0 µm Measuring accuracy Without image composition in Z ±2.5 µm With image composition in Z ±4.0 µm Width Measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measuring accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image Composition Fully automatic measurement (automatic XY control + automatic Z focus), automatic mapping, automatic area setup Measurable XY range 206 x 104 mm Object stage XY travel range 184 × 88 mm (motorized) Z travel range 73 mm (motorized) Hedpfjzimlpjx Abnenr Load capacity 4.5 kg Working distance 75 mm Image sensor 4-megapixel CMOS, B/W Transmitter lens Double telecentric lens x 2 Receiver lens Double telecentric lens Data processing Dedicated PC as per KEYENCE specifications (Operating system: Windows 11 Pro) Power Supply Voltage 100 to 240 V AC, 50/60 Hz Power consumption Max. 200 VA Environmental resistance Ambient temperature 15 to 30°C Relative humidity 20 to 80% RH (non-condensing) Weight approx. 28 kg (Net weight of measuring unit approx. 11 kg) Object Table Extension Observation software VR-5000 Version 3.3.5.75 Image Composition Module VR-H3J Creates a single large image from a series of images captured with the observation software. Color images are displayed. Analysis Extension Module VR-H3CA Expands the functions of the analysis software. Allows measurement comparison and 3D CAD measurement comparison. Condition: Used Scope of delivery: (as pictured) (Subject to change and errors in the technical data, information is provided without guarantee!) If you have any further questions, feel free to contact us by phone.

Stanje: novo, Hensoldt Wetzlar ZKG 7x35 Bundeswehr optični komplet + Hnedpey Il Ivsfx Abnjr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Manufacturer: KNAPP STREAMLINE Year of manufacture: 2010 Drive: SEW-Eurodrive motor Transverse roller conveyor Hnjdef Arpbopfx Abner DPP – Dynamic Positioning Platform Motorized roller conveyor with sensors. Dynamic material positioning – Incoming cartons, boxes, or trays can be positioned, rotated, or precisely conveyed by the system. Change of direction, distribution – The unit can transport goods in different directions, to other conveyor lines, or to other machines. Stop and buffer – Can also serve as an automatic buffer. Transfer Roller Section: Length: 765 mm Width: 325 mm Transfer roller diameter: 50 mm Conveyor Roller Section: Length: 335 mm Width: 325 mm 4 support rollers: 50 x 310 mm Overall dimensions: Width: 800 mm Length: 1250 mm Height: 530 mm

Stanje: zelo dobro (rabljeno), Optical Emission Spectrometer Ultima 2 benchtop unit, sequential spectrometer with a 1 m monochromator, 2400 g/mm grating in first and second order, 160-800 nm, without IMAGE Quick overview analysis IMAGE: Quick Overview Analysis IMAGE NAVIGATOR for JY 2000-2, Hnsdpfezhkccsx Abnor JY Ultima 2 or JY Ultima 2C External closed cooling circuit for cooling the RF coil of the Ultima 2 Argon humidifier – for analysis of solutions with high salt content. ULTIMA 2 ICP-OES – Optical Emission Spectrometer reliable high-efficiency 40.68 MHz solid-state generator complete and precise wavelength scan from 160 to 800 nm as standard maximum practical resolving power