Fritz Heckert Rezkalni Stroj Za Rezkanje Utorov nakup rabljenega (100.147)

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 200/80, skupna širina: 1.540 mm, skupna dolžina: 1.330 mm, skupna višina: 2.110 mm, dolžina mize: 800 mm, Na prodaj je stroj za frezanje utorov. Proizvajalec: WMW HECKERT Dimenzije stroja: 1330 x 1540 x 2110 mm Hfsdpfx Aszz Rzfsh Hol Teža stroja: 2,5 tone

Stanje: zelo dobro (rabljeno), Tip: U3E1000 Številka stroja: 17098 Letnik: 1982 Hfsdpszvq Axofx Ah Hsl Podatki: Moč motorja: 3 kW Dolžina vlečne palice: 1000 mm Dimenzije (Š x G x V, približno): 900 x 700 x 1600 mm Teža (ocenjena): 300 kg ..... 3 orodne palice

Stanje: zelo dobro (rabljeno), Premer obdelovanca – maks. 300 mm Hfsdszq Hl Sepfx Ah Hel Dolžina rezkanja 1000 mm Vpenjalna dolžina 2400 mm Vretenasta glava ISO 40 Razdalja delovno vreteno / vpenjalna površina maks. 180 - 330 mm Vpenjalna površina 2410 x 375 mm Vzdolžno gibanje 1000 mm Navpično gibanje rezkalnega vretena 150 mm Hitrost vrtenja 45 - 500 min⁻¹ Teža stroja pribl. 5,6 t Potrebni prostor pribl. 3,0 x 1,6 x 1,9 m Rezkanje utorov, večutorno rezkanje, rezkanje zobatih gredi

Stanje: dober (rabljeno), Manufacturer: VEB Fritz Heckert Model: FU 250x1000 X-axis travel: 900 mm Y-axis travel: 300 mm Hfedpfxotryc Nj Ah Hel Z-axis travel: 380 mm Spindle speed: 28–2800 rpm Feed rate: 10–630 mm/min Table dimensions: 1240 x 340 mm Motor power: 6 kW, 35 A Weight: 1.7 t Machine dimensions: 1580 x 1420 x 1470 mm

Stanje: dober (rabljeno), – ISO40 – 50–2500 vrt/min – Pnevmačna miza 600 × 220 mm – Samodejni pomik – Hitri pomik – Digitalni prikaz položaja – Vrtljiva glava za rezanje Hodpfx Aszxmc Tsh Hjfl – Zaščitni pokrov – Gumb za izklop v sili – Orodje – Osvelitev – 400 V

Stanje: rabljeno, Protinastavek in adapter za rezkalni stroj za horizontalno rezkanje Protinastavek in adapter (kontradržalo) za rezkalni stroj DECKEL (Nosilni blok z lastovičjim vpenjalnim adapterjem DECEL FP1 + FP2) Tip 9570 Širina ozkega lastovičjega repa: ca. 72 mm Širina širokega lastovičjega repa: ca. 88 mm Hedpfx Ahoxcbl De Hefl Višina lastovičjega repa: ca. 15 mm Dolžina (nosilni blok): 133 mm Širina (nosilni blok): 50 mm Skupna višina (nosilni blok): 105 mm Ležajna izvrtina: Ø 17 mm (z bronasto ležajno pušo) Razdalja osi izvrtine do nosilne površine lastovičjega repa: ca. 82,5 mm (višina konice) - Adapter, primeren za lastovičji rep in vpenjalno površino, povečanje za 22,5 mm na višino konice 105 mm Skupna dolžina (lastovičja letev): 635 mm Teža: 3,8 kg zelo dobro stanje

Leto izdelave: 1995, stanje: dober (rabljeno), številka stroja/vozila: 8883, Ponudba 26051 Tehnični podatki: Hjdpfx Ahoyz S Tre Hofl - Ročni pomik rezkalne enote - Delovna miza po višini nastavljiva preko ročnega kolesa - Horizontalna in vertikalna pritrditev materiala - Premer rezkarja do 300 mm - Maksimalna višina rezkanja: 150 mm - Maksimalna globina rezkanja: 110 mm - Maksimalna dolžina rezkanja: 500 mm - Kotno nastavljiv prislon levo + desno 20° - 90° - Hitrost vretena rezkarja: 2800 min⁻¹ - Pogon: 400 V, 2,2 kW - Priklop na stisnjen zrak: 6 – 8 bar - Poraba zraka na delovni cikel: 10 l - Pnevmatsko vpenjanje profilov - Naprava za pršenje - Potrebni prostor cca: š 1300 x v 1450 x g 1100 mm - Teža cca: 300 kg

Stanje: rabljeno, Leto izdelave: 1995, številka stroja/vozila: 1/95, 6-Position Contour Milling and Sanding Carousel CAMAM Model GC6/4F/1L – Used - With double clamping system - 1 internal/external milling unit - 1 internal milling unit - 1 external milling unit - 1 external sanding unit Hedpfxjqmnido Ah Hofl - Voltage: 380V/50Hz - Serial number: 1/95 - Complete with 4-sided enclosure and roof - Year: 1995

Stanje: rabljeno, Leto izdelave: 1984, Technical specifications: X-axis travel: 400 mm Y-axis travel: 100 mm Z-axis travel: 100 mm Electrical version - Voltage/Frequency: 380/50 V/Hz Total power requirement: 0.8 kW Machine weight approx.: 132 kg Space requirements approx.: 1.6 x 0.6 x 1.4 m This milling machine is ideally suited for window construction. Vertical mortising machine for aluminium - Pneumatic workpiece clamping - Feed operation by manual lever Hsdpfju Nc Nxex Ah Hofl - Fuse: 2.2 V

Stanje: rabljeno, Leto izdelave: 1978, Données techniques : Surface de fixation de la table : 1970 x 400 mm Distance broche/table : min./max. 150 / 250 mm Avance rapide : 1 / 2 m/min Vitesse de rotation de la broche de fraisage : 112 ... 1400 / 12 incréments tr/min Cône de la broche de fraisage : DIN 2019 = n°40 (SK40) Réglage axial manuel : 150 mm Avance de la broche : 0,012 / 0,025 / 0,05 mm/tr Plage d'avance - horizontale : coulisseau de fraisage : 8...100 / 12 incréments mm/min Puissance totale requise : env. 8,4 (10,5 kVA) kW Poids de la machine env. : 3 000 kg Dimensions de la machine env. LxlxH : 3,05 x 2,7 x 2,0 m Fraiseuse à rainures Application : fraisage de rainures droites et hélicoïdales. Fraisage de multiples rainures avec séquence automatique programmée. Autres caractéristiques : - Distance axe broche / bord inférieur du contre-support : 55 mm - Déplacement axial de la broche du contre-palier : 50 mm - Déplacement du coulisseau de fraisage horizontal 1000 mm (automatique + manuel) et vertical 100 mm à la main + max. 5 mm automatiquement/hydrauliquement Hsdju Ndhijpfx Ah Hsfl Équipement : - Bac à copeaux 470x300x300 mm - Divers accessoires/équipements d'aide.

Stanje: novo, Prenosljiva in fleksibilna mizna naprava, ki za vsak delovni cikel izreže utor za pero tipa W s klinasto obliko. Funkcija: Nastavite omejevalnike po meri in vstavite obdelovanec. Ko pritisnete ročico navzdol, se obdelovanec vpne. Istočasno se rezkalna enota premakne na nastavljeno globino rezkanja. Ko ročico sprostite, se obdelovanec sprosti, motor pa se samodejno izklopi. Končano! Tehnični podatki: Električni priključek: 1ph/N/PE 230 V 50/60Hz, 1.0 kW Motor: 1 x 1000 W Število vrtljajev v prostem teku: 34.000 1/min Nadzor: ročni Vpenjanje obdelovanca: ročno Prehodna višina: 130 mm Globina rezkanja: 0-85 mm Priključek za odsesavanje: Ø 50 mm Hfsdpfx Aovwf Dkjh Hsl Velikost peresa: W Dimenzije (Š/D/V): 740/650/835 mm Teža: 32 kg Št. artikla: W1031000

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1960, številka stroja/vozila: 719, Manufacturer: Hurth Model: LF 00 Machine No.: 719 Year of manufacture: approx. 1960 Weight: approx. 400 kg General / Technical Data: Used horizontal keyway milling machine with crank-driven slot length adjustment and automatic depth infeed. Keyway width for cutter diameter: from 2 to 10 mm Slot length per pass: 0 to 60 mm + cutter diameter 10 depth feed rates: 0.03 to 0.3 mm Milling feed: 8 table traverse speeds via crank mechanism: 5.1 / 7.3 / 10.2 / 13.9 / 18.4 / 25.4 / 34.7 / 49.5 strokes/min Spindle speeds: 4 steps: 970, 1370, 1950, and 2750 rpm Table dimensions (fixed table): 160 mm x 355 mm Hedpfeg Uq Dfsx Ah Hefl Table elevation adjustment: 40 mm Table traverse (cross travel against the cutter): 110 mm Power supply / Spindle motor output: 380 Volt, 50 Hz / 0.8 kW / 920 rpm Approx. machine dimensions (L x W x H): 670 mm x 1100 mm x 1200 mm Accessories / Special Features: Chip tray Coolant system Machine documentation Remarks: The machine is in a condition appropriate for its age. It is primarily designed for small to medium batch production. Easy slot length adjustment via crank mechanism.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Spare parts for Fritz Heckert milling machines F315, F400 – including the earliest models. We offer a comprehensive range of spare parts for milling machines – covering both old and new German WMW HECKERT models: F315, F400, FSS-350MR, FSS-400MR, FU-350MR, FU-450MR, FU-350ApUG, FU-450ApUG, FU-350MRApUG, FU-450MRApUG. Our stock includes: milling heads and all associated gearboxes, dividing heads, steady rests, all electromagnetic clutches and brakes, shafts, bevel gears, worms and worm gears, pulleys, levers, longitudinal and cross-feed screws, nuts, oil pumps, coolant pumps, spindles, quills, hydraulic manifolds/distributors, and more. Hfodpfxsvtnfps Ah Hol All original spare parts for Heckert milling machines are available directly from our warehouse, ready for immediate dispatch. All parts are new, manufactured to German quality standards, and meet the highest technical requirements.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 140 mm, pomik osi Y: 100 mm, pomik po osi Z: 300 mm, dolžina obdelovanca (maks.): 400 mm, Koncept osnovnega stroja se odlikuje po naslednjih značilnostih: - horizontalna lega vretena za obdelovanec; vertikalna lega vretena za rezalnik oziroma rezalne glave - obdelovanec se namesti med vretenom za obdelovanec (levo) in podpornim vretenom (desno) - radialni nosilec je nameščen na podstavku (os X) - osni nosilec se premika po radialnem nosilcu (os Z) - rezalna glava z možnostjo premika je opremljena z avtomatsko nastavitev kota (os A); nosilec za premik (os Y) se premika tangencialno glede na premer obdelovanca TEHNIČNE PODROBNOSTI Hod osi X: 140 mm Hod osi Y: 100 mm Hod osi Z: 300 mm Hod podpornega vretena (os W): 420 mm Kot nagiba rezalne glave (os A, levo): 50° Kot nagiba rezalne glave (os A, desno): 60° Največji modul, ki ga je mogoče obdelati z valjčnimi rezalniki po DIN 8002: 4,5 mm Hsdpfxjzwmyie Ah Hsfl Največji modul, ki ga je mogoče obdelati pri visokozmogotnem rezanju: 3,0 mm Število zob: 2–999 Premer obdelovanca pri ročnem vstavljanju: maks. 200 mm Premer obdelovanca pri avtomatskem vstavljanju: maks. 150 mm Dolžina obdelovanca: maks. 400 mm Območje vrtljajev rezalnika (os B): 0–1.500 vrt/min Območje vrtljajev obdelovanca (os C): 0–350 vrt/min Podatki o rezalniku Premer rezalnika: 40–102 mm Dolžina rezalnika: maks. 230 mm Radialni premer rezalne površine (standard): 16–32 mm Koordinate rezalnika Os Z: 100–400 mm Os X: 130–150 mm Os Y (sprednja stran vretena za rezalnik): 50–230 mm Os W (sprednja stran vretena za podporno opremo): 165–585 mm Hitrost podajanja (os X): 3.500 mm/min Hitrost podajanja (os Z): 3.500 mm/min Hitrost podajanja (os Y): 4.000 mm/min Hitrost podajanja (os W): 5.500 mm/min Hitrost podajanja (os V, portalni nosilec): 80.000 mm/min OPREMA Nadzorni sistem IBH Naprava za vstavljanje veliko dodatne opreme

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, Na prodaj je stroj za rezkanje ozobljenja zobnikov. Proizvajalec: LIEBHERR Table diameter: 315 mm Table hole diameter: 80 mm Maximum diameter gear cut: 300 mm Hobbing length: 225 mm Maximal module: 6,0 Hobbing length: 225 mm Maximum diameter of hob tool: 140 mm Maximum length of hob tool: 152 mm Maximum length of workpiece: 680 mm Minimum No. Of teeth cut: 4 Hfsdpjzz I Naefx Ah Hsl Machine dimensions: 3,3 x 1,9 x 2,2 m Machine weight: ca. 6,0 t

Stanje: novo, Leto izdelave: 2025, težka konstrukcija z litoželezno mizo nežni premiki z ročico in ročnim kolesom Hsdpsycg U Eefx Ah Hefl ekcentrična vpenjalna naprava nastavek za vrtanje moznika z rasterji 16-22-25-32 mm 2 hitrosti 1500/3000 obr/min WESCOTT vrtalna glava 1 - 16 mm CE Dimenzije delovne mize: 287 x 550 mm Vzdolžni hod: 200 mm Vertikalni hod: 160 mm Prečni hod: 125 mm Moč trifaznega motorja: 1,8 kW, 400 V, 50 Hz

Stanje: zelo dobro (rabljeno), Chain Mortising Machine PANHANS Drilling table size: 520 x 290 mm Max. drilling depth: approx. 130 mm Max. drilling length: approx. 240 mm Height adjustment: approx. 135 mm Drill speed: 3000 rpm Motor power: 1.5 kW, 400 V, 50 Hz Required space (L x W): approx. 900 x 1100 mm Weight: approx. 220 kg 2-lever operation WESCOTT drill chuck, 20 mm Hedpeza Dx Nefx Ah Hsfl Dowel drilling device with 4 stops (16, 22, 25, 32 mm) Mitre fence, continuously adjustable up to 45° 2 workpiece clamps Height adjustment via handwheel Motor protection switch with undervoltage release Workpiece stop, 1500 mm Includes inspection certificate for compliance with section 4 of the AM-VO Space requirement: approx. 950 mm x 1000 mm x 1300 mm Weight: approx. 200 kg Note regarding used machines: • Errors in technical data and prior sale excepted. • Prices listed are ex-location, free loading. • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers may inspect the machine at its location. • Special agreements are only valid if made in writing. (We only answer inquiries containing your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame Hfodpfor A Eq Rjx Ah Hsl

Stanje: kot nova (razstavni stroj), Leto izdelave: 2013, - Universal milling head - Fixed angle table 670 x 320 mm - Coolant system - Chip tray - Quill cover - Set of operating tools - Technical documentation - CE version - Colour: * RAL 5015 – Sky Blue * RAL 7035 – Light Grey Hsdpfxog D Rhhe Ah Hofl Optional accessories: - SINO 3-axis digital readout: € 1,995.00 - 1 set of levelling wedges (4 pcs.): € 480.00 Technical data: Work table: - Clamping surface of the fixed angle table: 670 x 320 mm - T-slots: number / width x spacing: 5 / 12 x 63 mm - Max. workpiece weight: 150 kg - Vertical clamping surface: 670 x 220 mm - T-slots: number / width x spacing: 3 / 12 x 60 mm Work spindle: - Toolholder horizontal and vertical: ISO / DIN: 40 / 2080 - Main drive motor output 100% duty cycle: 1.5 kW Vertical milling head: - Speed range: 45 – 2,240 rpm - Number of speed steps: 18 - Manual quill adjustment: 60 mm - Swivel range: 360 degrees Travel paths: - X-axis automatic / manual: 280 / 300 mm - Y-axis automatic / manual: 250 / 270 mm - Z-axis automatic / manual: 300 / 310 mm Feeds: - Feed range: 12.5 – 630 mm/min - Number of feeds: 18 - Rapid traverse: 1,200 mm/min Dimensions and weight: - Length: 1,265 mm - Width: 1,080 mm - Height: 1,620 mm - Weight approx. 1,000 kg Machine inspection / machine acceptance: Before loading the machine SUBJECT TO ERROR AND PRIOR SALE!

Stanje: novo, Leto izdelave: 2024, - FAGOR 3-axis digital readout, model: 400iB INNOVA - Milling head manually swivels ±90° - Manual tool clamping via M16 draw bolt for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Servo motors with inverter for X/Y/Z axes - Ball screws in X/Y/Z axes - Gearbox for 18 spindle speeds - Counter-support with support bearing - 1 pc. long milling arbor 27 mm - 3 pcs. reduction sleeves (MK1, MK2, MK3) - Spindle guard with safety switch - Splash guard on 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guideways Hfodjvunrfspfx Ah Hol - Mechanical handwheels for X/Y/Z axes - Coolant system - Covers for X/Z axes - Operating tools - Technical documentation - CE-compliant version Colours: - RAL 7024 – Graphite grey - RAL 7035 – Light grey Technical Data: Fixed Angle Table: - Working surface dimensions: 1,000 x 540 mm - T-slots: number / width x spacing: 8 pcs. / 14 x 63 mm - Max. table load: 300 kg Vertical Table: - Working surface dimensions: 1,200 x 250 mm - T-slots: number / width x spacing: 8 pcs. / 14 x 63 mm Travels: - Axis travels: automatic/manual - Longitudinal (X): 600 mm - Cross (Y): 500 mm - Vertical (Z): 400 mm Vertical Milling Head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 40 – 3,200 rpm - Number of spindle speeds: 18 (40 – 65 – 83 – 100 – 130 – 160 – 200 – 250 – 400 – 330 520 – 650 – 820 – 1,020 – 1,280 – 1,600 – 2,000 – 3,200) - Quill stroke, manual: 100 mm - Head swiveling: ±90° - Distance spindle nose/table: 70 – 470 mm - Distance spindle centre to column – min./max.: 160 / 660 mm Horizontal Spindle: - Tool holder: ISO 40 / DIN 2080 - Number of gear steps: 18 - Speed range: 40 – 3,200 rpm - Distance spindle centre / to 2nd T-slot: 95 – 495 mm - Distance spindle centre / to 3rd T-slot: 180 – 580 mm Feeds: - Infinitely variable - Range (X,Y,Z): 0 – 600 mm/min - Rapid traverse (X, Y, Z axes): 600 mm/min Motors: - Main drive power: 3.75 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight: - Dimensions (W x D x H): 1,881 x 1,813 x 1,916 mm - Weight: 1,600 kg

Stanje: novo, Technical specifications: Drilling capacity in steel: 40 mm Tapping capacity: M 20 Spindle: MT 3 Reach: 260 mm Speeds: (12) 55 - 2520 rpm Quill stroke: 130 mm Table size: 585 x 190 mm Travel X: 380 mm Travel Y: 190 mm Column diameter: 115 mm Hodjwhd Afjpfx Ah Hsfl Motor power: 2.2 kW Weight, approx.: 300 kg Equipment: - Cross table - Thread draw spindle - Tapping device - Rotatable table - Height-adjustable safety cover - Spindle guard protected by limit switch

Stanje: novo, Technical data: Drilling capacity in steel: 50 mm Thread cutting capacity: M33 Face mill: 100 mm End mill: 25 mm Spindle: MT 4 Throat depth: 340 mm Spindle speeds: (6) 50 – 1510 rpm Quill stroke: 200 mm Quill feed: 0.1 / 0.2 / 0.3 / 0.4 mm/rev Table size: 820 x 240 mm X-axis travel: 460 mm Y-axis travel: 280 mm Column diameter: 180 mm Number of T-slots: 4 T-slot size: 16 x 26 mm Motor power: 3 kW Weight, approx.: 750 kg Equipment: - Cross table - Thread drawbar - Thread cutting device Hfedpfjpxmlqsx Ah Hjl - Automatic spindle feed - LED machine lamp - Swiveling table - Manual fine feed - Coolant system - Height-adjustable safety guard - Spindle guard with limit switch

Stanje: novo, Universal tool milling machine according to DIN 8615. The torsion-resistant machine base made from MEEHANITE® quality cast iron and the high-precision, hardened and ground guideways on all axes guarantee high precision and durability. With the 3-axis digital display, all values are directly accessible, and with the user-friendly control panel on a swivel arm (OPTION), it can be individually positioned. Fixed angular table clamping area: 900 x 500 mm Max. workpiece weight: 360 kg Tool holder horizontal/vertical: ISO 40 Main spindle motor output / 100% duty cycle: 3.75 kW Feed motor output X/Y/Z axis: 1.0 / 1.0 / 1.5 kW Total connected load: 7.4 kVA Speed range: 40 - 3800 rpm Number of speed steps: 18 Manual quill stroke: 120 mm Swivel range: +/- 90° Travel path X (automatic/manual): 600 mm Travel path Y (automatic/manual): 460 mm Travel path Z (automatic/manual): 380 mm Stepless feed range X/Y/Z: 10 - 650 mm/min Rapid traverse: 1000 mm/min Dimensions LxWxH, approx.: 1850 x 1650 x 1900 mm Weight, approx.: 1780 kg Equipment: - 3-axis digital display (e.g. FAGOR® Innova), with various comfort functions, on a user-friendly swivel arm (OPTION) - DC servo motors on all X/Y/Z axes, e.g. from DELTA® - Spindle run-out max. 0.005 mm, incl. inspection protocol according to DIN 8615 (rolling bearings SKF®/NSK®) - Spring-loaded safety handwheels on all axes, e.g. from GANTHER® - Torsion-free machine bed made from MEEHANITE® quality cast iron - High-precision, hardened and ground guideways on all axes with TURCITE®-B coating - Backlash-free HIWIN® precision ball screw spindles on all axes - Electronic overload protection on all axes - Multi-adjustable spindle guard, secured by micro limit switches - Automatic intermittent central lubrication - Drill quill - Swiveling control panel on a cantilever arm (approx. 1,600 mm) (OPTION) - Hydraulic tool clamping - Electrical components SIEMENS®, BALLUFF® - Coolant system - Horizontal machining unit Hsdpsuxt N Iefx Ah Hjfl - LED machine lamp - Generously sized chip tray - Inspection protocol in accordance with DIN 8615 - Operating tools - Operating manual, spare parts list, including electrical diagrams etc. in German - CE

Stanje: novo, Special promotional price for stock items! Only while supplies last! Price is net ex stock, loaded free of charge. The machine is supplied without a machine stand. Machine stand BF3 Deluxe available separately under Art. No. 56-1017. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. face mill diameter: 80 mm Throat depth: 220 mm Spindle speed: (12) 75 - 3200 rpm Hfjdpfx Aodh Hbcsh Hel Spindle taper: MT 4 Quill stroke: 125 mm Table size: 800 x 240 mm Table travel (x / y): 555 / 225 mm Milling head swiveling: -90° to +90° Spindle to table distance: 60 - 485 mm Milling head height adjustment: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H)*: 1140 x 770 x 1500 mm Weight approx.: 287 kg * without machine stand Features: - Simple and quick speed changes via gear selector switch - Versatile applications such as drilling, milling, thread cutting, etc. - High running smoothness thanks to precision-ground, oil-bath lubricated gear wheels - Right- and left-hand rotation for thread cutting - Quill adjustment via handle, fine adjustment via handwheel - Dovetail guides for x-, y-, and z-axis, adjustable via gib strips - Milling head swivels on both sides for angle drilling, chamfer milling, etc. - Heavy-duty, large cross table, precisely ground surface - Optimal price-performance ratio for the cost-conscious user Scope of delivery: Quick-release drill chuck 3 - 16 mm / B 16 Drill chuck arbor MT 4 / B 16 Drawbar M 16 Reducing sleeve MT 4 / 3 Combination shell end mill arbor MT 4 / 27 mm Height-adjustable safety guard Thread cutting device LED machine lamp Digital quill stroke display Slatted safety cover Longitudinal measurement scale Operating tools

Stanje: delavnici obnovljeno (rabljeno), Stroj za obdelavo z orodjem: Deckel Tip: FP 2 Stanje: Geometrijsko obnovljen, rabljen Leto izdelave: 1980. leta, geometrijska obnova leta 2026 Hfjdpfxjzcdars Ah Hol Tehnični podatki: Hodi v smeri X/Y/Z, pribl.: 400 / 200 / 400 mm Vpenjalno orodje: S20 Število vrtljajev: (18) 40 - 2000 min-1 Podi: (18) 8 - 400 mm/min Glava, možnost nagiba: 180° Oprema: - Protokol geometrijske obnove - 3-osna digitalna prikazovalna enota, nova - Zaščitna naprava za vreteno z končnim stikalom, nova - Strojna luč, nova - Horizontalno in vertikalno vreteno - Fiksna nagibna miza - Sistem za hlajenje - Posoda za odrezke