Eubama Rotacijski Stroj Za Prenos nakup rabljenega (93.380)

Stanje: rabljeno, Leto izdelave: 2011, proizvajalec krmilnikov: Fanuc, model krmilnika: 30i, Opis: Splošno: Leto izdelave: 2011 Krmiljenje: Fanuc 30i Maks. obremenitev mize: 100 kg Pomik X/Y/Z: 300/300/370 mm Postavitvena teža: pribl. 33.000 kg Obdelovalna postaja I (X/Y/Z/B): Tehnologija: 1 x vertikalno vreteno Št. vrtljajev: 8.000 min⁻¹ Oznaka orodja: HSK-A 63 Moč: 31 kW Navor: 197 Nm Menjalec orodij: 12 postaj B-os: 0,001°, indeksiranje pnevmatsko, sila vpenjanja Premer/dolžina orodja: 125/250 mm Obdelovalna postaja II (X/Y/Z/B): Dcodpozfu Rfsfx Adiok Tehnologija: 1 x vertikalno vreteno + 1 x horizontalno vreteno Št. vrtljajev: 8.000 min⁻¹ Oznaka orodja: HSK-A 63 Moč: 31 kW Navor: 197 Nm Menjalec orodij: 12 postaj B-os: 0,001°, indeksiranje pnevmatsko, sila vpenjanja Premer/dolžina orodja: 125/250 mm Obdelovalna postaja III (X/Y/Z/B): Tehnologija: 1 x vertikalno vreteno Št. vrtljajev: 8.000 min⁻¹ Oznaka orodja: HSK-A 63 Moč: 31 kW Navor: 197 Nm Menjalec orodij: 12 postaj B-os: 0,001°, indeksiranje pnevmatsko, sila vpenjanja Premer/dolžina orodja: 125/250 mm Obdelovalna postaja IV (X/Y/Z/B): Tehnologija: 1 x vertikalno vreteno + 1 x horizontalno vreteno Št. vrtljajev: 8.000 min⁻¹ Oznaka orodja: HSK-A 63 Moč: 31 kW Navor: 197 Nm Menjalec orodij: 12 postaj B-os: 0,001°, indeksiranje pnevmatsko, sila vpenjanja Premer/dolžina orodja: 125/250 mm Nakladalna postaja: Število: 2 kosa (spredaj in zadaj) Oprema / dodatki: Merilni sistemi: neposredno na vseh oseh Odstranjevanje ostružkov: transportni trak za ostružke Hladilna sredstva: IKZ naprava, 30 bar Nadzor loma orodja: Artis, tip CTM V5 Sistem ničelne točke: Erowa Lovilec oljne megle: Reven

Leto izdelave: 2005, stanje: rabljeno, Rotacijski stroj Kneissler KE 8-180D, letnik 2005. Dcedpfx Adjziz Rgoiok

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 27 Dcsdpfxow Huhco Adijk - Number of Stations: 12 - Number of Machining Stations: 9 - Indexing Time: 2 s MACHINING UNIT - Designation: UV151-3 - Number of Units: 1 - Travel Path X/Y/Z Axes: 110 / 150 / 100 mm - Rapid Traverse Speed: 6500 mm/min - Resolution: 0.001 mm MACHINING UNIT - Designation: UV50-3 - Number of Units: 8 - Travel Path X/Y/Z Axes: 40 / 120 / 100 mm - Rapid Traverse Speed: 6500 mm/min - Resolution: 0.001 mm SPINDLES - Spindle Type: Electrospindle Ø38 * Number of Spindles: 14 * Tool Holder: ISO10 * Spindle Speed: 18,000 rpm * Spindle Drive Power: 0.25 kW - Spindle Type: Electrospindle Ø38 * Number of Spindles: 4 * Tool Holder: ISO10 * Spindle Speed: 9,000 rpm * Spindle Drive Power: 0.25 kW - Spindle Type: Electrospindle Ø120 * Number of Spindles: 1 * Tool Holder: HSK40 * Spindle Speed: 8,710 rpm * Spindle Drive Power: 3.8 kW - Spindle Type: Electrospindle Ø38 * Number of Spindles: 2 * Tool Holder: ISO10 * Spindle Speed: 9,000 rpm * Spindle Drive Power: 0.25 kW ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Connected Load: 10 kW WEIGHT AND DIMENSIONS - Required Floor Space: 4600 x 3600 mm - Machine Height: 3200 mm - Machine Weight: 13,500 kg - Accessories ACCESSORIES - Control: Siemens - Coolant Container - Coolant Tank with High-Pressure Pump - Chip Conveyor - Oil Mist Extraction: ELBARON RON/A 120 - Charger - Fire Extinguishing System - Posing

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 27 - Number of stations: 12 - Number of processing stations: 9 - Indexing time: 2 [sec] PROCESSING UNIT - Designation: UV151-3 - Number of units: 1 - Travel distance X/Y/Z axes: 110 / 150 / 135 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] PROCESSING UNIT - Designation: UV50-3 - Number of units: 8 - Travel distance X/Y/Z axes: 40 / 120 / 100 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] SPINDLES - Spindle type: Electrospindle Ø38 * Number of spindles: 14 * Tool interface: ISO10 * Spindle speed: 18,000 [rpm] Dedpfx Aev Rgy Hsdijck * Spindle drive power: 0.25 [kW] - Spindle type: Electrospindle Ø38 * Number of spindles: 4 * Tool interface: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: Electrospindle Ø120 * Number of spindles: 1 * Tool interface: HSK40 * Spindle speed: 8,710 [rpm] * Spindle drive power: 3.8 [kW] - Spindle type: Electrospindle with reduction gearbox Ø38 * Number of spindles: 2 * Tool interface: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 10 [kW] WEIGHT AND DIMENSIONS - Space requirement: 4600 x 3600 [mm] - Machine height: 3200 [mm] - Machine weight: 13,500 [kg] ACCESSORIES - Control system: Siemens - Coolant container - Coolant tank * with high-pressure pump - Chip conveyor - Oil mist extraction: ELBARON RON/A 120

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 27 Dcodpfxov Rgyys Adisk - Number of stations: 12 - Number of machining stations: 9 - Indexing time: 2 [sec] MACHINING UNIT - Designation: UV151-3 - Number of units: 1 - Travel X/Y/Z axes: 110 / 150 / 135 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] MACHINING UNIT - Designation: UV50-3 - Number of units: 8 - Travel X/Y/Z axes: 40 / 120 / 100 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] SPINDLES - Spindle type: electrospindle Ø38 * Number of spindles: 14 * Tool holder: ISO10 * Spindle speed: 18,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: electrospindle Ø38 * Number of spindles: 4 * Tool holder: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: electrospindle Ø120 * Number of spindles: 1 * Tool holder: HSK40 * Spindle speed: 8,710 [rpm] * Spindle drive power: 3.8 [kW] - Spindle type: electrospindle with reduction gearbox Ø38 * Number of spindles: 2 * Tool holder: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 10 [kW] WEIGHT AND DIMENSIONS - Required space: 4600 x 3600 [mm] - Machine height: 3200 [mm] - Machine weight: 13,500 [kg] ACCESSORIES - Control: Siemens - Coolant container - Coolant tank *with high-pressure pump - Chip conveyor - Oil mist extractor: ELBARON RON/A 120

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 48 - Number of Stations: 16 - Number of Units: - Number of Units Possible Horizontally: 16 - Number of Units Possible Vertically: 7 - Max. Diameter: 45 [mm] - Max. Workpiece Diameter: 150 [mm] - Basic Unit GM50/150: * Z Stroke: 150 [mm] * Spindle Power: 5 [kW] * Spindle Speed: 0 - 8000 [rpm] - X/Y Slide: * X Travel: +/- 40 [mm] * Y Travel: +/- 20 [mm] - Dimensions: 14000 x 4800 x 3000 [mm] - Weight: 13 [t] - Operating Hours: 4283 [h] ACCESSORIES - CNC Control Bosch Rexroth INDRAMOTION MTX-L85 - Station 1: * Sawing Unit 52/100, 3 Axes - Station 2: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ (internal coolant supply) - Station 3: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ - Station 4: Dsdpfxsu N Ivqs Adieck * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ - Station 5: * CNC Slide 50/150 ref. 22.10.001-4 (2 axes) * CNC Unit 50/150 ref. 22.42.001-6 (with CNC turning function) * IKZ - Station 6: * CNC Slide 50/150 ref. 22.10.001-4 (2 axes) * CNC Unit 50/150 ref. 22.42.001-6 (with CNC turning function) * IKZ - Station 7: * Slide 50/150 manual adjustment ref. 22.10.002.1 * Recessing Unit ref. 22.42.041.1 - Station 8: * CNC Slide 50/150 ref. 22.10.001.4 (2001) * CNC Unit 50/150 ref. 22.42.001.6 (with CNC turning function) - Station 9: * CNC Slide 50/150 ref. 22.10.001.4 * Sawing Unit ref. 22.42.039.2 - Station 10: * Slide 50/150 manual adjustment ref. 22.10.002.1 * Sawing Unit ref. 22.42.039.8 - Station 11: * CNC Slide 50/150 ref. 22.10.001.4 * Unit 50/150 ref. 22.42.001.6 (CNC turning function) - Station 12: * Slide 50/150 ref. 22.10.002.1 * Sawing Unit ref. 22.42.041.1 - Station 13: * CNC Slide 50/150 ref. 22.10.001.4 * Sawing Unit ref. 22.42.041.1 - Station 14: * CNC Slide 50/150 ref. 22.10.001.4 * CNC Unit 50/150 ref. 22.42.001.6 (turning function) - Station 15: * CNC Slide 50/150 ref. 22.10.001.4 * CNC Unit 50/150 ref. 22.42.001.6 (turning function) * IKZ - Station 16: * CNC Slide 50/150 ref. 22.10.001.4 * CNC Unit 50/150 ref. 22.42.001.6 (turning function) * IKZ - Bar Feed Magazine Length: 4 meters - Coolant Tank KNOLL (2000 liters) with high pressure pump HP 60 [bars] - Chip Conveyor

Stanje: rabljeno, TECHNICAL DATA - Number of positions: 16 - Indexing time: 0.7 [sec] - Max. bar diameter: 32 [mm] - Clamping type: Collet VB 32 - Max. part length: 150 [mm] - Max. number of horizontal units: 16 - Max. number of vertical units: 8 - Max. total number of units: 24 - Electrical supply: 400 [V] - Installed power: 40 [kW] - Dimensions: 9.8 x 4 x 2.9 [m] - Weight: 6,500 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT - 2 CNC turning units (2 axes) - Parts conveyor belt - Chip conveyor Dedpouhbwijfx Adieck - Coolant tank - Filtration

Stanje: rabljeno, TECHNICAL DATA - Number of stations: 12 - Table indexing: 12 x 30 [°] - Collet type: SCHAUBLIN W25 Dcsdpfx Adsuhbwcjijk - Max. clamping diameter: 25 [mm] - Max. workpiece length: 100 [mm] - Supply voltage: 3x 400 [V] - Installed power: 32 [kW] - Machine dimensions: 2700 x 2700 x 2500 [mm] - Weight: 4000 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT 5.07.018-4, capacity 4200 mm - Position 1: Cut-off - Position 2: Longitudinal drilling 30/60 - Position 3: Longitudinal drilling 30/60 - Position 4: CNC turning 2 axes - Position 5: Reversing - Position 6: Radial drilling 30/60 - Position 7: CNC turning 2 axes - Position 8: Angular drilling 30/60 - Position 9: Radial drilling 30/60 - Position 10: Angular drilling 20/50 - Position 11: Radial drilling 20/50 - Position 12: Longitudinal drilling 30/60 - Ejection between positions 12 and 1 - Workpiece conveyor belt - Chip conveyor KNOLL 450 K-1/2000 - Coolant tank KNOLL KTS-25-60-T - HP pump: 40 [bar] - Filtration KNOLL VRF 500

Stanje: rabljeno, Leto izdelave: 2001, Stations: 10 / 22 Tool Holder: SK 40 Dcsdpfx Adstqqlqoiek Control: SIEMENS SIMATIC OP 3 Total Power Requirement: approx. 112 kW = Transfer Machine Drum-type indexing table with 10 workpiece stations, 22 machining units (Drilling: 7 units, Drilling & Tapping: 8 units, Drilling & Countersinking: 5 units, Drilling, Countersinking & Tapping: 2 units), each with SK 40 tool holders, motor power per unit between 4.0 and 4.5 kW, SIEMENS control system SIMATIC OP 3, equipped with an ABB loading robot. Accessories: Chuck (without jaws), chip conveyor, coolant system.

Stanje: rabljeno, Leto izdelave: 1997, Stations: 10 / 22 Dcjdpfx Adetqqlroisk Tool holder: SK 40 Control: SIEMENS SIMATIC OP 3 Total power requirement: approx. 130 kW = Transfer machine Indexing drum with 10 workpiece stations, 22 machining units (drilling: 10 units, drilling & tapping: 5 units; drilling & countersinking: 3 units; drilling, countersinking & tapping: 1 unit; tapping: 3 units), Tool holders: SK 40 for each unit, motor power per unit between 4.5 and 5.5 kW, SIEMENS control: SIMATIC OP 3, loading robot: ABB Accessories: chuck (without jaws), chip conveyor, coolant system

Stanje: pripravljen za uporabo (rabljen), A complete CNC rotary transfer manufacturing system by Winema, including interlinking, peripherals, and a washing system, is available. 1) Rotary transfer machining center Winema RV20 Flexmaster, stations: 6, machining positions: 12, max. material throughput: 42mm, internal thread 1: M16x1.5, internal thread 2: M20x1.5, bores: 8.7mm/15mm/17mm/18mm, reaming operations: 9mm/15mm/18mm, cycle time: approx. 7s, output rate: approx. 500 parts/h, control: Siemens Sinumerik 840D. 2) Bar feeder magazine Winema, tube support: 800mm, max. tube thickness: 2mm, max. bar length: 3200mm. 3) Coolant filtration unit Knoll Turbofilter, dirty tank volume: 500l, clean tank volume: 150l, filtration fineness: 50μm. 4) Cooling unit Knoll, cooling capacity: 15kW, max. oil temperature: 30°C. 5) Oil mist extraction unit UAS, separation efficiency: 96%-98%. 6) Interlinked continuous flow washing unit with automatic parts transfer. 7) Hydraulic unit. 8) Conveyor units. 9) Fire suppression system. This is a complete and interlinked production line for NC control valve manufacturing. The production of additional components can likely be set up. Documentation available. On-site inspection possible. Dcodpozbl N Ssfx Adiek

Stanje: rabljeno, Leto izdelave: 2002, Artikel: Rotacijski avtomat Proizvajalec: Pfiffner Tip: Hydromat HB-32/45 Dcedpfx Adoy N Agroiok Letnik izdelave: 2002 Za dodatne informacije in slike nas kontaktirajte po e-pošti (at) ali

Stanje: rabljeno, Description: General: Year of manufacture: 2018 Control: Fanuc Machining stations: 5 units Dodpfxjvr Az Ne Adieck Loading station: 1 unit Travelling range: X-axis: 450 mm Y-axis: 500 mm Z-axis: 450 mm Rapid traverse X/Y/Z: 50 m/min Turret: Number of stations: 8 Speed: 13,300 rpm Torque: 58 Nm Tool holder: HSK 63 C Workpiece/Fixture: Maximum dimensions: 350 x 350 x 350 mm Maximum permissible weight: 250 kg Media connections: 6 units NC rotary tilt table: A-axis: +/- 150° B-axis: 360° Maximum load: 250 kg Table diameter: 320 mm Equipment / Accessories: Loading/Unloading: Fanuc Robot M20i-A Chip disposal: 2x chip conveyors Coolant supply: High-pressure coolant system, 20 bar Linear measuring systems: Direct on all axes

Stanje: pripravljen za uporabo (rabljen), Two identical Eubama rotary indexing machines, including filtration systems, are available. Workpiece diameter: 60 mm, workpiece length: 320 mm, clamping stations: 10, indexing performance: 20 cycles/min, spindle stroke: 100 mm, drilling capacity steel/brass: 20 mm/30 mm, thread cutting capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible. Dcsdpfjw Hglmjx Adisk

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Stations: 24, Sub-stations: 20, Side stations: 20, Axes: 2/station, Collets: 24, Production output single/double cycle: 120/240 pcs/min, Stroke: 35 mm, Max. workpiece diameter: 25 mm, Spindle speed: 20,000 rpm, Machine weight: approx. 2,650 kg, Control system: Mikron MAC 50, Operating hours: approx. 17,335 h. Documentation available. On-site inspection possible. Dsdpfx Adsw Emx Rsiock

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, A rotary transfer machine for the production of ball sockets is available. Processing stations: 13, bar feeder: 0433, bar feeder length: 3000 mm, machine power: 40 kW, control system: Hydromat. Includes Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B coolant processing, and separate Knoll chip disposal. In 2015, the machine was upgraded with SW milling. Documentation available. On-site inspection is possible. Djdsu T Rg Ropfx Adijck

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Stations: 6, Power: 40 kW, Control system: Siemens. Includes upstream Fischer separating head, Festo feed unit, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip processing system with ejection and hydraulic unit. Documentation available. On-site inspection possible. Djdpfeu T Rhbjx Adieck

Stanje: pripravljen za uporabo (rabljen), Length: 8,225 mm, width: 3,200 mm, complete with documentation. Djdpsi Ew Dpsfx Adiock

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Max. workpiece diameter: 42 mm, connected load: 132 kVA, length: 4,600 mm, width: 7,500 mm, height: 3,000 mm, with bar feeder. Dodpfxsp S Sq Dj Adisck

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61062, prehod palice: 24 mm, TECHNICAL DETAILS Spindle bore: 24 mm Bar feeder Model: IEMCA PRA52 F33 Year of manufacture: 2004 Max. bar length: 3300 mm Max. bar diameter: 9.1 mm Controller model: Siemens S7-200 Drive for parting-off unit Stroke per slide: 7.15 mm Actuation angle: 26.565° Facing chuck PKD 80 MACHINE DETAILS Operating voltage: 230 / 400V Frequency: 50 Hz EQUIPMENT Nordmann tool monitoring with touchscreen Tool Monitor Chip conveyor (Knoll 500 K-1/450, year 2004) Oil filtration system (Knoll FKA 150) Scraper belt conveyor with coolant system High-pressure unit FKA / 250 Tubes with coolant connections Hydraulic power unit Central lubrication system Dcodpfx Aoyx Ia Nsdiok Hydraulic diagram and accessories Pressure intensifier HC3 - 4.0 - B Deflector plate T-T Pneumatic accessories (for 4 cylinders) Compressed air maintenance unit DA 300 Chuck plate for jaw chuck TK420 Oil distributor 2-jaw chuck (Röhm, part no. 431074, stroke 4.25 mm) Cut-off saw with gear drive Clamping flange (diameter: 100 mm) Complete spindle unit with timing belt drive Coolant supply Cover plates for empty stations Material stop (60 mm stroke) Parting-off unit extended by 35 mm Measuring system Z axis Spindle unit with hydraulic NC axis Device for flushing clamping jaws Interchangeable parts for material clamping Stops for hydraulic unit carrier Exchange parts for bar feeder magazine Tools Tool holders Auxiliary clamping with collet Further details about the machine can be found in the attached documents.

Stanje: rabljeno, številka stroja/vozila: R92, Rabljen rotacijski stroj za polnjenje steklenic KOSME Tehnične specifikacije in zmogljivostni podatki Ta rotacijski stroj za izpiranje in polnjenje je bil razvit s strani podjetja KOSME za natančno in zanesljivo polnjenje vina v industrijskih okoljih za pakiranje. Zasnova v obliki vrtiljak zagotavlja konstantno vodenje steklenic in stabilen pretok, primerno za proizvodnjo pijač, vključno z integracijo v rabljene in že uporabljene linije za polnjenje. Tip stroja: Rotacijski stroj za izpiranje in polnjenje (vrtiljak) Proizvajalec: KOSME Glavna uporaba: Polnjenje negazirane mize Produkcijska hitrost: Običajno nekaj tisoč steklenic na uro (odvisno od konfiguracije) Obseg velikosti steklenic: približno 0,25 l do 1,5 l (običajno 0,75 l za vino) Posode: Steklenice Načelo polnjenja: Nadzorovana gravitacija ali blagodejno vakuumsko polnjenje (blagodejni podtlak) Izpiranje: Vgrajen stroj za izpiranje s tremi stopnjami škropljenja Materiali, ki pridejo v stik z izdelkom: Nerjaveče jeklo Ohišje: Stekleno, zaklenjeno zaščitno ohišje Napredna avtomatizacija in nadzorni sistemi Stroj podpira tako samodejni kot tudi ročni način delovanja, da se prilagodi proizvodnim zahtevam in spremembam formata. Nadzorni elementi omogočajo varno in učinkovito upravljanje, hkrati pa zagotavljajo dosledno visoko kakovost polnjenja. Izbirno stikalo za samodejni/ročni način delovanja Ročni način delovanja z tipkanjem, pa tudi zagon/ustavitev stroja Nadzor hitrosti vrtenja za vrtenje vrtiljaka in optimizacijo procesa Nujni izklop in ponastavitev na nič Signalna lučka za prikaz stanja Zaklenjena dostopna vrata in stekleno zaščitno ohišje za zaščito operaterja Ločen nadzor izpiranja s tremi stopnjami škropljenja Zmožnosti integracije v linijo Zasnovan za brezhibno integracijo v rabljeno linijo za polnjenje ali delovanje kot samostojna enota, se ta rotacijski stroj za izpiranje in polnjenje lahko enostavno poveže z predhodnimi in naslednjimi napravami, kot so odstranjevanje palet/pregled, ter etiketiranje, namestitev kapsul in sekundarno pakiranje. Ravnanje s steklenicami in stabilno gibanje vrtiljaka omogočata enakomeren vstop in izstop na standardnih transportnih sistemih. Delovanje v liniji ali kot samostojna enota Združljiv s transportnimi trakovi in medpomnilnimi sistemi Obseg formata, primeren za običajne steklenice vina: 0,25 l, 0,75 l, 1,5 l Idealno za proizvodna okolja pijač, kjer je poudarek na vinu Stanje stroja in zgodovina vzdrževanja Djdpszrgrbofx Adijck Stroj je bil uporabljan v okolju z dobrim vzdrževanjem in ima popolnoma stekleno, zaklenjeno ohišje, ki podpira higieno in varnost. Zahvaljujoč KOSME Engineeringu so rezervni deli in storitve dobro dostopni preko uveljavljenih industrijskih mrež. Celotno stanje ustreza rabljeni opremi, ki je pripravljena za zanesljiv zagon v profesionalni proizvodnji pijač. Delovna zmogljivost in vsestranskost Posebej zasnovan za negazirano vino, zagotavlja sistem z nadzorom nivoja in gravitacijo oziroma blagodejnim vakuumom, dosledno raven polnjenja pri različnih steklenicah.

Stanje: rabljeno, Leto izdelave: 2001, Rotationsstanzmaschine Baust BRS-320-D20-U800 mit Zubehör Produktionsrichtung: rechts nach links Band Einlaufkorb mit Bandführung Angetriebener Vorschub, Unterrolle angetrieben Oberrolle von Hand zustellbar Seitliche Bandführungen intern 2 Rotationsstanzen Wechselschlitten, viele Verstellmöglichkeiten 4 Rotationsstanzen Einheit, zum wechseln Band Auslaufkorb Schrott Förderband Laufrad Verschiebung für aus der Anlagenlinie zu Rollen Schutzabdeckungen mit Sicherheits Zuhaltungen mit Stanzwerkzeugen mit Steuerung und Bedienpult mit Elektrischer Dokumentation mit Original Dokumentation Alle Steckverbindungen auf Hartingstecker Dedpfx Aey Szlxodieck Mit der Maschine wurden C-Schienen und Hutschienen aus 2-3mm Blech gelocht. Lief bis zu Abbau im Kundenwerk in der Produktion einwandfrei. Bei der Integration in eine vorhandenen Profilieranlage oder anderes können wir Sie unterstützen.

Stanje: rabljeno, Rotacijski stroj za štancanje Baust BRS z dodatno opremo Smer proizvodnje: z leve proti desni Košara za uvajanje traku z vodilom za trak Pogonjen podajalnik, spodnji valj pogonjen Zgornji valj nastavljiv ročno Stranska notranja vodila za trak 2 rotacijski štanci, številne nastavitve Košara za izhod traku Transportni trak za odpadke Kolesa za premikanje iz proizvodne linije na kolesa Zaščitni pokrovi z varnostnimi zapahi Dodpfoy Syivjx Adieck z orodji za štancanje z upravljanjem in krmilno ploščo z električno dokumentacijo Z napravo so bili luknjani C-profil in montažne letve iz 2 mm pločevine. Delovala je brezhibno v proizvodnji do demontaže pri stranki. Pri integraciji v obstoječo profilirno linijo ali drugo opremo vam lahko pomagamo.

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 8011 TEHNIČNI PODATKI - maks. višina obdelovanca: 150 mm - maks. širina obdelovanca: 1300 mm - zgornji agregat s 6 krtačami - agregat nastavljiv gor/dol - brusilni agregati v obliki zvezde, rotacijski - brezstopenjska nastavitev hitrosti vrtenja krtač - brezstopenjska nastavitev hitrosti podajalnega traku preko pretvornika - brezstopenjska regulacija vrtljajev agregata s krtačami - pogon traku: 0,75 kW - motor krtače: 6×1,5 kW - motor za rotacijo agregata: 0,75 kW - vakuumska miza - vakuumska črpalka: 7,5 kW - premer odsesovalnih priključkov: 3x120 mm - dimenzije črpalke: 1200x1000x1650 mm - skupne dimenzije (d/š/v): 2000x2500x2100 mm - teža pribl. 3000 kg PREDNOSTI – širina 1300 mm – vakuumska črpalka – rotacijski agregat Dsdpjzkhdcsfx Adiock – nemška proizvodnja – rabljeni brusilni stroj, v zelo dobrem stanju Neto cena: 29.900 PLN Neto cena: 7.120 EUR glede na tečaj 4,20 EUR (Cene se lahko spremenijo ob večjih valutnih nihanjih)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 6.000 kW (8.157,72 KM), skupna masa: 3.000 kg, dolžina mize: 3.000 mm, širina mize: 1.500 mm, Oprema: CE označba, dokumentacija / priročnik, This laser cutting machine is capable of processing both sheets and tubes. The Wattsan 1530 Rotary can cut stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. It features a working area of 1500x3000 mm. A tube cutting module for square tubes (10 to 140 mm) and round tubes (10 to 220 mm) is integrated on a single platform. The standard configuration includes a 6-meter tube cutting module. Depending on your requirements, we can extend the module up to 12 meters. Call our managers for more details! Wattsan 1530 Rotary Features: • Working area: 1500x3000 mm • Laser power: up to 6000 W • Weight: 4,400 kg Virmer offers not only top-class machines, but also service and delivery. Our engineers and managers are ready to answer all your questions and, if necessary, provide video support. In addition, owners of Wattsan equipment receive lifetime online support. Dsdpfjry U Twjx Adisck Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. We offer not only laser engravers, but also metal cutters, welding machines, markers, and cleaning systems. Wattsan is a Chinese manufacturer that has been producing laser equipment for nearly 15 years and is continuously developing thanks to the feedback of its customers. Customer input has led Wattsan to implement over 50 upgrades, making the machines more reliable, precise, and powerful—taking your business to the next level. YOU CAN WRITE OR CALL US! WE WILL CHOOSE THE RIGHT MACHINE FOR YOUR TASK If you are looking for the right laser or CNC milling machine, we are happy to assist. You will find a wide range of laser machines and equipment with us: CO2 laser machine; laser cutting machine for metal; laser metal cutter; fiber metal laser; fiber metal laser engraving machine; CNC milling machine for metal; milling machine for wood; CNC milling machine; laser engraving machine; laser engraver; laser cutting machine for plywood; laser engraver; laser cutting machine for metal; CNC milling machine; laser marker; lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; compressor; rotary device; mirrors for laser machines.