Donau Donau Dr, Danuflex, Danumeric nakup rabljenega (4.621)

Stanje: novo, Nadomestni deli za hitre radialne vrtalke Donau: Donau DR, Donau Danuflex, Donau Danumeric, Donau Danusys, Donauflex, Donaumeric. Kedey Ri H Ispfx Abxsdn

Stanje: generalkompletno obnovljen (rabljeno), Popravilo krmilne plošče za vrtljaje za različne modele. Kontaktirajte nas, če prestave menjalnika ne delujejo pravilno. Ksdpfsy Rfzusx Abxodn

Stanje: rabljeno, zmogljivost vrtanja: 23 mm, Oprema: Na voljo je tipska ploščica, Hitra radialna vrtalna stiskalnica – stebrna vrtalna stiskalnica Donau Werkzeugmaschinen DR23 radialna vrtalna stiskalnica Serijska številka 2062-4 Obratovalna napetost 380 V z ničelnim vodnikom, 50 Hz, 3 faze Vrtalna zmogljivost: do pribl. Ø 50 mm Kodpfx Aewybqqsbxodn Območje vrtljajev: 58 – 1275 obr/min Naprava za rezanje navojev, iztez 920 mm Strojna svetilka Velikost osnovne plošče/mize pribl. 1100x400 mm Moč motorja pribl. 1,5 kW, brez hladilne opreme 2 T-utorja zadaj levo Teža: pribl. 1.200 kg Izvlečno roko je mogoče obračati, nastavljati po višini ter premikati po dolžini in globini. Želen položaj se lahko z gumbom nastavi z obračanjem - vlečenjem - premikanjem - fiksiranjem. Ogled pod napetostjo je mogoč po predhodnem dogovoru. Cena po dogovoru Naša cenovna pričakovanja so 1.680 € neto iz skladišča, plus stroški embalaže. Za vse tehnične podatke si pridržujemo pravico do napak/zmot. Prodaja izključno v državah EU.

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, DONAU DANUMERIC 440, letnik 1998 Tehnični podatki: - Miza 1800 x 600 mm, 4 T-utori - Polmer vrtanja 540 – 1590 mm - Vpenjalo vretena SK40 Kjdpfx Abjy Txlrsxedn - Hitrost vretena 15 – 2800 min⁻¹ - Moč motorja 5,5 kW - Teža cca 2.800 kg

Stanje: rabljeno, Leto izdelave: 1971, Technical details: Drilling capacity in steel (diameter): 23 mm Kodjv Ay T Dspfx Abxjdn Max. workpiece height: ./x. 2 mm Drilling capacity in cast iron: Ø 26 mm Spindle taper: MT 3 Quill stroke: 135 mm (manual/automatic) Spindle speed: 7 steps rpm Feed range: mm/rev Table size: 1200 x 500 mm Table clamping surface: 1070 x 400 mm Total power requirement: 3.55 kW Machine weight approx.: 1.4 t Machine dimensions approx. (LxWxH): 1.7 x 1.2 x 2.2 m Arm: - Vertical adjustment: 450 mm, horizontal adjustment: 610 mm - Swivel range 360°, hydraulically lockable Right- and left-hand rotation for tapping with automatic reversal Operation via control panel Coolant tank with pump

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 190 mm, hitrost vretena (min.): 41 obr/min, največja hitrost vretena: 1.800 obr/min, skupna masa: 1.920 kg, teža obdelovanca (maks.): 17 kg, najv. debelina jeklene pločevine: 32 mm, vrtilni moment: 250 Nm, višina mize: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - Fully overhauled by vaumatec in 2022 - Equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet to relieve the table frame) Technical data: Drilling capacity (solid material): St 60/E335, Ø 32 mm (with feed rate 0.20 mm/rev): GG 22, Ø 45 mm Tapping capacity: St 60/E355, M26 Tapping capacity: GG22, M35 Tool holder: MT4 Column diameter: Ø 195 mm Spindle nose to table distance (min./max.): 260/660 mm Table height: 900 mm Quill stroke: 190 mm Column travel: 400 mm Spindle speeds, Range I: 41-1800 rpm Feeds: 0.1-0.15-0.20-0.3 mm/rev Spindle torque: max. 250 Nm Arm travel resistance (radial): 25 N Arm travel resistance (axial): 25 N Clamping force (radial): 3500 Nm Clamping force (axial): 5500 N Feed force: 7500 N Max. permissible mass: 17 kg Max. permissible moment of inertia: 0.002176 kgm Workpiece: Max. table load: 1000 kg Center of gravity: centered on the working surface Kodpfern Riqsx Abxedn

Stanje: dober (rabljeno), Tip stroja: Donau radialni vrtalni stroj DR 32 Leto izdelave: neznano Vpenjanje MK 4 Hitrost vretena: 41 – 1800 1/min Kdodpfx Abey Tpq Esxon Naprava za vrezovanje navojev Črpalka za hladilno tekočino Teža: pribl. 2500 kg Vrtalna zmogljivost v jeklu: 32 mm Velikost mize: pribl. 1200x600 mm

Stanje: pripravljen za uporabo (rabljen), DONAU DR 23 - Hitrotekoča radialna vrtalna naprava - Vrtalne zmogljivosti v jeklu: pribl. 28 mm - Izsev: 700 mm - Morsejev stožec MK 3 Kdodpfx Absy Uv Tvjxsn - Območje vrtljajev: 70-1550 o/min (menjalnik) - Avtomatski podajniki: 0,075-0,3 mm - Naprava za rezanje navojev - Vrtalna globina pribl. 130 mm - Hidravlična blokada - Dokumentacija Dimenzije: DxŠxV 2x1,7x1,9 metra / Teža 1900 kg Pridržujemo si pravico do napak ali sprememb.

Stanje: pripravljen za uporabo (rabljen), Donau Danumeric 440 Radial Drilling Machine Drilling capacity (steel): Ø 40 mm Thread cutting: up to approx. M36 (depending on material) Tool holder: SK 40 Spindle speed: approx. 15 – 2,800 rpm (stepless adjustment) Feed: stepless, approx. 5 – 2,000 mm/min Quill stroke (Z): 200 mm Column travel (W): 410 mm Arm travel: 1,050 mm Drilling radius: approx. 540 – 1,290 mm Arm swivel range: approx. 330° Column diameter: 195 mm You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. Kdjdpfx Abeyrdc Soxjn For foreign customers, a net invoice can be issued. A valid VAT ID number is required. Subject to prior sale. Visit our shop to view more of our offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the description may occur and are subject to change.

Stanje: rabljeno, Dimenzije mize 500 x 1.200 mm Kodoy Umg Tjpfx Abxjdn Število T-utorov 30 Razmak T-utorov 125 mm Razdalja med vretenom in mizo 110 - 760 mm Radij nihanja 535 - 1.135 mm Območje vrtanja 600 mm Delovna višina 800 mm Hod pinole 200 mm Višinsko nastavljanje glave za vrtanje 450 mm Število stopenj hitrosti 18 Obseg hitrosti 35 - 1.800 obr/min Zmogljivost vrtanja v ST 60 – polni premer Ø40 mm Zmogljivost vrtanja v GG 22 – polni premer Ø50 mm Po naši oceni je stroj v dobrem rabljenem stanju in ga je mogoče po dogovoru ogledati pod napetostjo. Dodatna oprema, prikazana orodja in vpenjalna sredstva so vključena v obseg dobave samo, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesno prodajo!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Kapaciteta vrtanja St 60/GG 22: 40/50 mm Rezanje navojev St 60/GG 22: M 36/M 45 Kdodpfxoy I Ua Io Abxen Vpenjalna površina mize: 600 x 1800 mm Višinsko nastavljanje izravnalnika: 450 mm Majhen/velik radij vrtanja: 305/1305 mm Vretenski nosilec: SK 40 Hod pinole: 200 mm Brezstopenjske vrtljaje vretena: 15 - 2800 obr/min Brezstopenjski podajalci: 5 - 2000 mm/min Pogon vretena, frekvenčno krmiljen: 5,5 kW Električni priklop: 400 V, 14 kVA Teža: 3400 kg Potreben prostor: 3800 x 2000 x 2500 mm

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC radialni vrtalni stroj, ki je bil leta 2018 generalno obnovljen. Delovno območje X/Y: 1050 mm/1800 mm, zmogljivost vrtanja v jeklo: 40 mm, zmogljivost vrtanja v litoželezo: 50 mm, rezanje navojev: M36-M45, vpenjalo za orodje: SK40, območje vrtljajev: 15 obr/min-2800 obr/min, hod pinole Z: 200 mm, hod stebra W: 410 mm, vpenjalna površina mize X/Y: 1800 mm/600 mm, hitrost podajanja: 5 mm/min-2000 mm/min, hitra pomika X/Y: 7,5 m/min, upravljanje: CNC upravljanje. Opremljen z 360° vrtljivo napravo, motoriziranim vpenjanjem orodja, trivilčnimi tokali za okrogle dele, posodobljenim LCD zaslonom, obsežnim paketom orodij. Teža: cca 2900 kg, skupne mere X/Y/Z: cca 2600 mm/1900 mm/2950 mm. Ogled možen po dogovoru. Kjdpoy Tn Ntofx Abxjdn

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Stepless speed programming • Stepless quill feed via three-phase servomotor • 2 x 18 mm T-slots on the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travels Tool holder type SK 40 Column diameter 195 mm Table dimensions 1800 x 600 mm Number of T-slots 4 T-slot spacing 125 mm Quill travel (Z-axis) 200 mm Column travel (W-axis) 410 mm Distance spindle nose to table top (min.) 70 mm Distance spindle nose to table top (max.) 680 mm Distance spindle nose to floor (min.) 970 mm Distance spindle nose to floor (max.) 1580 mm Drilling radius 540 – 1590 mm Working table height 900 mm Machining Capacities Drilling capacity full material St 60: Ø 40 mm GG 22: Ø 50 mm Thread cutting St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled 5.5 kW at 100% duty cycle Speed range 15 – 2800 rpm Torque up to 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis AC servo motor 0.25 kW Y-axis AC servo motor 0.25 kW Z-axis AC servo motor 4.50 kW W-axis AC servo motor 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Feeds stepless 5 – 2000 mm/min Precision Positioning accuracy X/Y-axis over 1200 mm ± 0.075 mm Electrical Data Operating voltage/frequency 400V / 50Hz Control voltage 24V Hydraulic unit for clamping 0.75 kW Total connected load 13.0 kVA Kdedpfxoyxw Ddj Abxjn Weight Danumeric 440 (without packaging) with 1800 x 600 mm table 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, back-lit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Unit of measurement: mm or inch, also in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: up to 500 tools Subprogram technique: yes Machining Cycles Standard software options: dialog programming, 38 zero point shifts, rotate and mirror, Teach-In for X, Y, Z, program restart with selectable entry options Zero point determination: cycles for determining zero points by manual touch probe for: - arbitrarily fixtured rectangular parts - arbitrarily fixtured round parts - alignment of cast or flame-cut parts - angle determination on round parts by probing reference edges/surfaces Test graphics: graphical display of drilling patterns

Stanje: rabljeno, Leto izdelave: 1968, Donau hitra radialna vrtalna stroj tip DR 32 Število obratov 60–1800 /min Izvleček 600 mm Kdsdpfxjx Hgkvo Abxen Osnovna plošča 100 x 1400 x 110 mm Naprava za rezanje navojev Sistem za hlajenje Strojna svetilka Hitromenjalni nosilec z vložki Strojni primež

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine configuration • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed control • Infinitely variable quill feed via AC servo motor • 2 T-slots 18 mm on rear of machine base • 2 T-slots 18 mm on left side of machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard Dimensions and Travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – min. table top mm 70 Distance spindle nose – max. table top mm 680 Distance spindle nose – min. floor mm 970 Distance spindle nose – max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 – 2800 Torque: Nm max. 250 Constant from: min-1 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) Kdedpfx Aoyuqmisbxsn With table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - any clamped rectangular parts - any clamped round parts - centering of cast and flame-cut parts - angular position detection on round parts by probing reference edges/surfaces Test graphics Graphical display of drilling patterns

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle MT 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each on the rear and left sides of the machine base • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill travel mm 220 Column travel mm 450 Distance spindle nose – min. to table top mm 40 Distance spindle nose – max. to table top mm 710 Distance spindle nose – min. to base plate mm 840 Distance spindle nose – max. to base plate mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Capacity Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 Kdodpfjynt Ucjx Abxsn GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Infinitely variable feed mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical wiring diagram

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle MT 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each on the rear and left sides of the machine base • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill travel mm 220 Column travel mm 450 Distance spindle nose – min. to table top mm 40 Distance spindle nose – max. to table top mm 710 Distance spindle nose – min. to base plate mm 840 Distance spindle nose – max. to base plate mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Capacity Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Infinitely variable feed mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Kjdpfxsylnpij Abxodn Weight DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical wiring diagram

Stanje: rabljeno, Leto izdelave: 1987, Ponujamo rabljeni hitri radialni vrtalni stroj Donau DR 40-Z, letnik 1987. Proizvajalec: Donau Tip: DR 40-Z Serijska številka: 1146-3 Če imate kakršna koli vprašanja ali potrebujete dodatne informacije, nam pošljite sporočilo. Stroj se nahaja v Osterode/Harz. Oglede je možno organizirati po dogovoru. Gre za rabljeno napravo, zato prodajamo z izključitvijo kakršnega koli jamstva. Kdjdpfxoy Dn E Ne Abxsn

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle MT 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each on the rear and left sides of the machine base • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill travel mm 220 Column travel mm 450 Distance spindle nose – min. to table top mm 40 Kjdpfx Abjyhdvksxodn Distance spindle nose – max. to table top mm 710 Distance spindle nose – min. to base plate mm 840 Distance spindle nose – max. to base plate mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Capacity Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Infinitely variable feed mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical wiring diagram

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Kdsdpfx Abju Aa I Ssxon Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Danumeric 440 – Fully Refurbished and Digitized in 2024 Machine Specifications • Work Table: 1800 x 600 mm with 4 T-slots • Arm Travel: 1050 mm • Drilling Spindle: SK 40 with automatic tool clamping • Stepless speed programming • Stepless quill feed via three-phase servo motor • 2 x 18 mm T-slots at rear of machine base • 2 x 18 mm T-slots on left side of machine base • Tapping attachment • Centralized lubrication • Coolant system • Machine lamp • CE certification • Safety guard • USB interface Dimensions and Travel Tool Holder SK 40 Column Diameter mm 195 Table Dimensions mm 1800 x 600 Number of T-Slots 4 Distance between T-Slots mm 125 Quill Stroke (Z-axis) mm 200 Column Stroke (W-axis) mm 410 Spindle nose – Table top, min. mm 70 Spindle nose – Table top, max. mm 680 Spindle nose – Floor, min. mm 970 Spindle nose – Floor, max. mm 1580 Drilling Radius mm 540 - 1590 Table Height mm 900 Machining Capacities Drilling Capacity (solid): Steel 60: Ø 40 mm Cast Iron GG 22: Ø 50 mm Thread Cutting: Steel 60: M36 Kjdpfeu Dg D Aox Abxedn Cast Iron GG 22: M42 Main Spindle Drive AC Motor, frequency-controlled kW 5.5 at 100% duty cycle Speed Range: min⁻¹ 15 - 2800 Torque: Nm max. 250 Constant from: min⁻¹ 15 – 2000 Feed Drives X-Axis – AC Servo Motor kW 0.25 Y-Axis – AC Servo Motor kW 0.25 Z-Axis – AC Servo Motor kW 4.50 W-Axis – AC Servo Motor kW 2.50 Rapid Traverse (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid Traverse (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning Accuracy X-, Y-Axis Over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) With 1800 x 600 mm table kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, excellent readability from all angles 215 x 160 mm Position Indication: Cartesian or polar; values absolute or incremental Units: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology Database: • Tool management • Tool suggestions by machining type • Material-dependent cutting data recommendations • Tool library: up to 500 tools • Subprogramming: Yes Machining Cycles Standard Software Options: • Conversational programming • 38 zero offset memories • Rotation and mirroring • Teach-in for X, Y, Z • Program restart with selectable entry points Zero Point Determination: • Cycles for establishing zero points by manual touch-off on workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering of cast and flame-cut parts - Angle detection for round parts by referencing edges or surfaces Test Graphics: • Graphical display of drilling patterns Data Interfaces: • USB

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Kdodpfx Ajrmkfnebxon Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device Kodpevv Spksfx Abxjdn • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina mize: 1.200 mm, širina mize: 500 mm, nosilec vretena: MK 3, vrsta nastavitve višine: električni, Donau DR23 radialni vrtalni stroj – robusten kakovosten stroj Naprodaj je zanesljiv Donau DR23 radialni vrtalni stroj, idealen za delavnico, kovinsko obdelavo ali industrijsko uporabo. Stroj prepriča z robustno zasnovo, visoko natančnostjo in vsestransko uporabo pri vrtanju, povrtavanju in rezanju navojev. Podrobnosti: Proizvajalec: Donau Model: DR23 Radialni vrtalni stroj generalno obnovljen pri Vaumtec Hitromenjalna glava Stabilna lita konstrukcija Nastavljiva roka za fleksibilno obdelavo velikih obdelovancev Primeren za jeklo, aluminij in druge kovine Kdjdoyrtkxepfx Abxsn Vrtenje v desno in levo

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel distance 1050 mm • Drilling spindle MT 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm), machine base rear and left each • 3-axis digital readout • Machine lamp • Central lubrication • Worktable surface machined all around • Safety guard at drill • Coolant system Dimensions and Travel Ranges Tool holder MT 4 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Kdsdpox Uwpxjfx Abxen Column travel mm 450 Distance spindle bottom edge - min mm 40 table top edge max. mm 710 Distance spindle bottom edge - min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Worktable height mm 900 Machining Values Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 constant from min⁻¹ 15 - 200 Feed Drives Infinitely variable feed mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagrams Electronic circuit diagram