Deckel Stroj Za Graviranje nakup rabljenega (95.882)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, obratovalne ure: 2 h, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 355 mm, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 20 W, vrsta hlajenja: voda, trajanje garancije: 12 meseci, valovna dolžina laserja: 355 nm, vhodna frekvenca: 50 Hz, Oprema: kabina, UV-laserski gravirni stroj z lasersko močjo 20 W Laserski vir z valovno dolžino 355 nm / 20 W Razstavni stroj, z okoli 2 urami delovanja - Brez vidnih znakov obrabe - Vključno z rotacijsko osjo - Vključno s sistemom Windows 64-bit - Vključno z 22-palčnim monitorjem - Vse je pripravljeno, nameščeno in nastavljeno - Programska oprema za graviranje v nemščini - 3D-programska oprema (MM3D) - Zelo enostaven za uporabo - Vklopite in začnite - UV-laserski vir z 20 W za kontrastno in hitro označevanje z izjemno visoko ločljivostjo - Graviranje na praktično vseh kovinah (nerjaveče jeklo, medenina, aluminij itd.) - Graviranje na praktično vseh plastičnih materialih (tudi PVC, silikon itd.) - Graviranje na pravem steklu (tudi kristalno steklo) - Možnost rezanja pravega stekla - Robustna, industrijska kakovost - Celoten sistem / takoj pripravljen za uporabo - Delovni prostor približno 500 x 600 x 600 mm (Š x G x V) - Površina za pritrditev z navojnimi luknjami v razmiku 50 mm - LED-osvetlitev delovnega prostora - 50 mm priključek za cev za odsesavanje dima - Območje graviranja približno 150x150 / 200x200 / 300x300 (možnost preklopa) - 3D-skener za označevanje površin poljubne oblike - Vključno s pedalom za zagon postopka graviranja Prodaja je možna samo podjetjem. Dobava / svetovanje / prodaja samo v Nemčiji / Avstriji / Švici Prosimo, preverite tudi naše ugodne ponudbe za lizing/nakup na obroke. Dimenzije stroja približno: Širina: 800 mm Višina: 1800 mm Globina: 1000 mm Teža: približno 180 kg Pgsdpfx Aieflrnaj Aer

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 60 mm, skupna višina: 1.660 mm, skupna dolžina: 80 mm, skupna masa: 80 kg, The universally applicable LAS 28 laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, laser usage is essential in many industries. The powerful laser software enables you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks—no extensive programming knowledge needed. Serial and article numbers are automatically incremented by the software after initial setup. Additionally, the software can read data (such as part numbers, project names, etc.) from existing tables and transfer them automatically to predefined fields. The use of a hand scanner is also supported. Standard equipment includes a laptop with a mounting bracket and Windows operating system. Optionally, the LAS 28 can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, are also available. Made in Germany • Fiber laser 30W (optional 20 or 50 watts) • Wavelength 1064nm • Marking field size: 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Signal lamp for operating status indication Pgjdeunh Hrepfx Ai Aer • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (working level adjustment) • Frame made of aluminum profile • 230V power connection • Air-cooled • Laptop with Windows OS • Dimensions: 800x600x1660mm (LxWxH) • Weight: approx. 80 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 10.700 mm, laserska moč: 30 W, Laser engraving machine with 30-watt laser power - Laser source: 30-watt CO2 metal tube Demonstration unit with minimal operating hours - incl. Windows 10 Pro 64-bit PC system - incl. 22" monitor - all software pre-installed and calibrated - Engraving software in German - Very easy to operate - Switch on and start engraving right away - CO2 laser source with 30 watts for high-contrast and fast markings with extremely high resolution - Deep engraving capability - Wobble function - Suitable for engraving Psdpjirmgmofx Ai Aogr e.g. on wood, plastic, anodized surfaces, etc. - Heavy-duty industrial quality - Complete system / immediately ready for operation - Working area approx. 500 x 600 x 600 mm (L x W x H) - Mounting surface with threaded holes in 50 mm grid - LED workspace lighting - 50 mm duct connection for smoke extraction - Engraving area approx. 180 x 180 mm - Expandable up to approx. 300 x 300 mm - incl. foot switch to start engraving Please also note our attractive leasing/financing offers. Sale exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 800 mm Height: 1800 mm Depth: 1000 mm Weight: approx. 150 kg

Stanje: novo, Leto izdelave: 2020, CNC engraving machine MÜLLER LCF - 2 Psdpof Tnf Ujfx Ai Aegr Travel distances: X 375 mm, Y 570 mm, Z 90 mm Technical specifications: Table size: 700 mm x 480 mm Weight: 50 kg External dimensions: Length: 700 mm, Width: 500 mm, Height: 350 mm Accessories: PC Monitor Keyboard Mouse Software Controller Kress spindle Vacuum pump Mist coolant valve Includes various clamping collets and milling cutters – NEW

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna masa: 45 kg, vrsta nastavitve višine: električni, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, valovna dolžina laserja: 1.064 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, The LAS 22 is a compact desktop unit with a small working area, ideal for marking small components. Thanks to its compact design, the system is extremely user-friendly and can be used virtually anywhere. The universally applicable LAS 22 laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20 or 30-watt fiber laser. In many industries, laser marking is essential for permanent markings. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without requiring extensive programming knowledge. The software can automatically increment serial and article numbers after initial configuration. Moreover, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Using a hand scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optional: 20 watt) - Laser class 1 - Wavelength: 1064 nm - Marking field size: 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview, contour preview) - Focus finder (simple focusing) - Max. workpiece height approx. 95 mm - Grid holes for fixtures - Clamping area: 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) Pgodpfx Aisuy H Nqs Aor - Welded steel sheet construction - Connection: 230 V - Air-cooled - Laptop with Windows OS (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, A Panasonic laser marking machine (laser marking station) with a defective laser head is available. Travel distances X/Y/Z: 500mm/430mm/350mm, marking area X/Y/Z: 720mm/430mm/350mm, machine dimensions X/Y: approx. 800mm/1900mm. Documentation is available. An on-site inspection is possible. Podpsv Rfqqjfx Ai Asgr

Stanje: zelo dobro (rabljeno), hitrovrtna glava, udarna glava, Pedpfx Aisd Nauxs Ajgr SK 40 vpenjalne puše, vpenjalne puše, fiksna kotna miza: 420 x 800 mm, vrtljiva kotna miza: 240 x 700 mm, delilna glava.

Stanje: rabljeno, Leto izdelave: 1994, x-axis travel: 0 mm y-axis travel: 0 mm z-axis travel: mm Pgjdet Hw Dqjpfx Ai Aor Total power requirement: kW Machine weight approx.: t Space requirement approx.: m Marking machine with rotary table (bevel gears), 4 axes, PV 70 head with WINGRAED and WINSMAT software

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Currently available for immediate delivery – HSC 350MG by NCmind! Our smallest and "lightest" machine – at 900kg still easy to handle but robust and heavy enough to ensure outstanding surface quality. Thanks to the mineral cast used for the machine bed and gantry, it offers excellent rigidity and effective vibration damping. With travel ranges of 380 mm x 350 mm x 180 mm, it is a versatile companion and an essential addition to any workshop! The 40-position HSK-E25 tool changer comes as standard, as does the water-cooled 40,000 rpm spindle delivering up to 6kW of power. Psdpom Hd Ifefx Ai Aogr Our HSC 350 MG is not only economical but also extremely space-efficient. With incredibly compact dimensions of only 1060mm x 960mm x 2100mm (LxWxH, without control panel), it fits through almost any doorway! For more information, see the PDF, contact us by e-mail or phone – NCmind GmbH.

Stanje: zelo dobro (rabljeno), For sale: a classic, proven Gravograph IM3 mechanical engraver – ideal for nameplates, labels, industrial markings, or jewelry. • Model: Gravograph IM3 Pgodpfx Asun U Ucoi Aer • Manufactured by: GRAVOGRAPH GMBH, Umkirch (Germany) • Motor in working order, clean guides • Set includes a complete assortment of fonts and symbols • Stable cast construction • Precise pantograph control • Durable worktable with linear guidance Used condition, technically operational. Suitable for workshops as well as decorative and promotional purposes.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, DECKEL stroj za brušenje orodij / notranji brusilni stroj z navpičnim brusilnim vretenom – delujoč Na prodajo je rabljen DECKEL precizni brusilni stroj z navpičnim brusilnim vretenom za notranje krožno brušenje. Stroj je rabljen, delujoč in opremljen z digitalnim prikazovalnikom položaja (DRO). Oprema: Navpično notranje brusilno vreteno Digitalni prikazovalnik (X / Y / Z) Originalni DECKEL deli Robustna precizna izvedba Idealno za: Izdelavo orodij Izdelavo modelov Psdpfezhuyxjx Ai Aogr Precizno brušenje Notranjo obdelavo izvrtin Ogled in preizkus po dogovoru možna. Nakladanje na lokaciji možno. Dodatne fotografije pošljemo na zahtevo.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna masa: 520 kg, vhodna napetost: 400 V, potrebna višina: 1.760 mm, zahteva za prostor dolžina: 1.100 mm, potrebna širina: 800 mm, nazivna (navidezna) moč: 2 kVA, Werkzeugschleifmaschine DECKEL S11 TECHNISCHE DATEN: Schleifscheibendurchmesser: 125 mm Werkstückspindelaufnahme: ISO 40 Papierfiltrationseinheit: Nein Versorgungsspannung: 400 V Gesamtanschlussleistung: 2 kVA Abmessungen: 1100 x 800 x 1760 mm Gewicht: 520 kg IM LIEFERUMFANG ENTHALTEN: x1 Universal-Indexkopf – Art.-Nr.: 255X0X x10 Teilereinsätze für Universal-Indexkopf x1 Reitstock mit Querfeineinstellung – Art.-Nr.: 2621000 x1 Reitstock mit Höheneinstellung – Art.-Nr.: 2624000 x1 Schwenkhalterung – Art.-Nr.: 2626000 x1 Universalabrichtvorrichtung – Art.-Nr.: 2628000 x1 Universaleinstelllehre – Art.-Nr.: 2570000 x1 Spiralschleif- und Freischleifvorrichtung – Art.-Nr.: 2580000 x1 Freischleifschlitten – Art.-Nr.: 2673000 x1 Maschinenschraubstock – Art.-Nr.: 2635000 x1 Opto-elektronisches Messgerät mit Mikroskop – Art.-Nr.: 2650012 x2 Digitalanzeigen RSF-Elektronik x1 Radius-Schleifvorrichtung – Art.-Nr.: 2601X00 x1 LED-Lampe x3 Maschinenfüße Die Maschine kann nach Terminvereinbarung unter Strom an unserem Standort besichtigt werden. Preis auf Anfrage, Verladung auf Lkw inklusive. Weltweiter Versand möglich. Die Angaben auf dieser Seite wurden nach bestem Wissen gemacht. Eine Gewähr für die Richtigkeit kann jedoch nicht übernommen werden. Maschine zum Schärfen von Werkzeugen, Fräswerkzeugen, Gewindebohrern und Bohrern. Pgjdpfx Aioxdkw Ss Aer Vergleichbar mit Marken wie Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Siehe auch Rundschleif- oder Flachschleifmaschinen, Drehmaschinen, Bearbeitungszentren und Fräsmaschinen.

Stanje: rabljeno, Leto izdelave: 1996, Technical details: X travel: 100 mm Y travel: 100 mm Z travel: 300 mm Table size: 350 x 300 mm Air pressure: 6 bar Operating voltage: 220 / 240 V Machine weight approx.: 40 kg Dimensions: L: 475 x W: 300 x H: 700 mm Pgsdpfx Aou Nu Ugei Asr Application for engraving and/or marking operations on parts with flat as well as curved surfaces. Manual height adjustment with handwheel, digital display Includes control unit/device Technifor UC200; size 420 x 290 x 100 mm (external control command) Foot pedal XPE-M Test plate/table size 350 x 300 mm, cast steel (minor scratches) Pneumatic connections Note: The processing head (engraving unit) is not included in the scope of delivery. Sale at our net price as is.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FI-50-RAY-OF, dolžina gredi: 200 mm, vhodna napetost: 230 V, vrsta vhodnega toka: Enosmerni tok, laserska moč: 50 W, vrsta hlajenja: zrak, delovno območje: 200 mm, skupna masa: 46 kg, trajanje garancije: 36 meseci, vhodna frekvenca: 100 Hz, Available for immediate delivery! Buy now and save! Take advantage of this opportunity and secure the 50 Watt Raycus QB. For further information or a personalised offer, we are happy to assist you. Contact us today to learn more about the benefits of this outstanding product. We offer you a brand-new 50 watt Raycus fiber laser with German user software and operating instructions. This unit is extremely easy to use and ready for operation immediately, even without programming knowledge. Our services: • Personal delivery and installation • Setup and instruction on site or via remote connection • Ongoing support for any questions or issues • Service and spare parts supplied directly from Germany Technical details: • Laser power: 50 Watt Raycus • Wavelength: 1064 nm • Marking field size: 200x200 mm (Options: 50, 70, 110, 150, 250, 300 mm head) • Repeatability: ± 0.003 mm • Engraving speed: ≤ 7000 mm/s • Marking software: EZCAD in German / English • Pilot laser: easy preview • Laser class: 4 • Operating temperature range: 14-30 ℃ • Focussing: manual • Max. workpiece height: approx. 350 mm • Connection: 230V • Cooling: air-cooled • Weight: approx. 50 kg • Operating costs: low • Service life: over 100,000 maintenance-free operating hours • Features: matrix bore holes for fixtures • Wide range of materials: marks various materials Included: • 200x200 mm head, other sizes available • EC Declaration of Conformity • Warranty • Service • German software • Training for machine and software • Invoice Scope of delivery: • USB cable • Power cable • Stops • USB stick with parameters • Operating manual in German • Monitor mount • Foot pedal • Safety glasses Pgedpfxsu Hrf Do Ai Aor Applications: Perfectly suited for texts, logos, vector graphics, QR codes, DMC codes, 2D codes, variable data sets, and image engraving. This laser is ideal for engraving and annealing metals, as well as marking or decorating plastics and coated materials. Software: • EZCad 2.14.0 in German • Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: Service is provided directly by us, and we maintain the largest spare parts stock here in Germany to ensure fast and efficient support. Shipping and installation: With shipping, we connect the machine via remote connection, set it up, and provide a brief introduction. Alternatively, we offer personal delivery, installation, setup, and instruction. The price is agreed upon based on your postcode. Consulting: For detailed advice, please visit our website or contact us directly by phone. We are happy to answer all your questions.

Stanje: rabljeno, Leto izdelave: 2005, Napisi polje 120 x 120 mm Velikost mize 250 x 250 mm Največja teža obdelovanca 50 kg Krmiljenje Fobagraf Teža stroja cca. 1000 kg Ohišje stroja iz varjene jeklene konstrukcije Navzkrižni drsnik, izvedba iz trdega kamna, mizna plošča s prislonoma iz jekla Po višini nastavljiva laserska glava Kakovostno krmiljeni ND:YAG laserska glava, črpana s svetilko, 100 W Pjdjylcqhjpfx Ai Asgr Odbijalska enota nameščena na laserski glavi (s standardnim objektivom) Z-os z menjalnikom in servo pogonom Servokrmiljenje osi z X-, Y- in Z-osjo Hlajenje z vodo Krmiljenje: uporabniški programski paket Fobagraf Operacijski sistem Windows 2000 Ur vklopa: 17.388 h Navodila za uporabo priložena

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Laser marking system Manuf. Baublys Model BL 150 S/NC 500 Year 2001 Technical Data Manufacturer: Baublys Model: BL 150 S/NC 500 Year of manufacture: 2001 Laser: 150 Watt Laser type: Q-switched pulsed solid-state laser Laser medium: Nd:YAG Wavelength: 1064 nm Beam diameter: approx. 1.2 – 1.3 mm after output coupling mirror at TEM00 Beam divergence: 5 mrad TEM00 Pulse duration (time): CW / 90 ns Max. output power: 65 W multimode 16 W single mode Pulse energy: 16 mJ at 3 kHz Beam deflection system: Galvanometer system Line width in mixed mode: approx. 0.12 mm Deflection speed: 3 m/s; corresponding to 200 characters/s at 1.5 mm height and single-line font Dimensions: approx. Weight: approx. Power supply Voltage: 400 V, 3-phase 50 Hz, clockwise rotating field Connection: 5-pin CEE plug 16 A 6h Max. power consumption: 8.5 kW, max. 16 A per phase Fusing: 3 x 16 A slow-blow Water connection Cooling water flow rate: 7.5 l/min at 20°C supply temperature Discharge connection: G 3/4" male thread Heat dissipation: approx. 6.5 kW Max. inlet water temp.: 20°C Water consumption: depending on inlet temperature Pgsdpfx Aieq Abnne Asr Outlet temperature:

Stanje: dober (rabljeno), Stroj za graviranje z nadzorno enoto Heidenhain TNC530i. Premer mize: 1200 mm. Opremljen z visoko zmogljivim vretenom Peron, največ 60000 vrt/min. Pgodjhy Tg Repfx Ai Asr Opremljen s hladilnikom za vreteno. Opremljen z merilno enoto za orodje. Sistem za mazanje. Dokumentacija. Štirje nadzorovani pogoni: Os Y – vreteno navzgor in navzdol. Os Z – vreteno od desne proti levi. Os A – rotacijska miza. Os C – nagib vretena. Na zalogi v našem skladišču, možnost preizkusa kadarkoli!

Stanje: dober (rabljeno), Leto izdelave: 1980, Gravirni in kopirni rezkalni stroj Proizvajalec: DECKEL Tip: GK 21 Leto: ca. 1980 Maks. premer rezkarja: 10 mm Hitrost vretena: 475 - 20.000 obr/min Pomiki: 160 mm Y, 300 mm Z, 365 mm Miza: 200 mm X 360 mm Strojni omarici z veliko dodatne opreme in tehnično dokumentacijo priloženi. Teža: 620 kg. Pgjdpfx Aovk D A Eji Aor

Leto izdelave: 1985, stanje: rabljeno, 1 used engraving machine Manufacturer: KUHLMANN Model: GM I-I Working area: 320 x 200 x 280 mm Template table: 500 x 400 mm Work table: 500 x 200 mm Podpfjk Tt Axjx Ai Ajgr 3D form engraving device TGV disc engraving device Various templates and type sets Various engraving cutters Speed range: 4,200 – 20,000 rpm Required space: approx. 1.2 x 1 x 1.5 m Weight: approx. 250 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, laserska moč: 20 W, 19" Built-in System – Model 2025 – the marking champion among laser engravers! Laser Class 4 Metals – plastics and much more! • EZCAD 3 (genuine 64-bit card) with up to 4 axes • Intel i5 or AMD Ryzen with 32GB RAM and ultra-fast M.2 SSD, integrated in the 19" rack-mount enclosure • 23" TFT monitor for fatigue-free working • Windows 11 Professional 64-bit pre-installed • Professional JPT MOPA fiber laser source with 20W power and up to 600 kHz (optional: variable pulse width and up to 200W power for color-annealing marking and cleaning) • "DigiScan Eco 10" scanning unit for high detail and precision • Scanning area approx. 100 x 100 mm (optional: 150/200/300 mm) • 19" aluminum rack enclosure • 2 m fiber cable incl. laser head mount for easy installation • Professional German-language marking software • Barcode and QR code support • Serial number functionality • Batch scanning from Excel file, network, or database! • Laser parameter finder using matrix across 2 parameters (e.g. frequency to speed, frequency to power) • TCP/IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows for the seamless integration of external components like camera position detection. • Industry 4.0: System status can be processed at any time via TCP/IP protocol • Optocoupler-isolated inputs and outputs for automation (24V PNP logic) • New look & feel. A fresh design for even clearer and more comfortable operation • 3D preview for rotary axis processing • Up to 50% performance boost through 64-bit technology • Improved stability thanks to the latest drivers • Optional control of up to 4 axes WITHOUT switching, via PLUGINs • DEEP engraving function (slicer software for Z-axis control) • New, optimized hatching algorithms for highly efficient marking Pgsdpouxnwmsfx Ai Ajr • New galvo generation (Eco, Hi-Speed & 3D) with dual laser pointer for visual focus check • Connection option for external fume extraction • Start button and EMERGENCY STOP on the housing, as well as external ports for X, Y, Z, and A axes • Operating manual and control software in German Optional extras include: => Enclosure for Laser Class 1, available as table or stand model with castors and space for extraction system => IPG or SPI fiber laser sources in various power ratings => LED status bar (green/yellow/red) => Scanlab equipment => Suitable extraction systems => Automation for part loading, conveyor belts, and much more! => 3D marking and ENGRAVING function => Automatic focus adjustment via specialized laser sensor => Rotary unit in various versions => Motorized X and Y axes => Interlock system for marking WITHOUT protective housing, using only PPE (personal protective equipment) for bulky parts Includes training at our training center in Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt facility! Therefore, bespoke solutions are always possible! => Made in Schweinfurt! Images may show optional equipment! We are your partner for laser engraving machines and laser markers. Whether manual or automated laser marking systems, we are happy to provide you with a quote.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: JEWELliner "XS" PRO Modell "Premium", vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, skupna širina: 400 mm, skupna višina: 500 mm, skupna dolžina: 600 mm, skupna masa: 55 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, širina odprtine vrat: 400 mm, višina odprtine vrat: 200 mm, valovna dolžina laserja: 1.064 nm, Developed, manufactured, and tested in Germany. JEWELliner "XS" model "Premium" available with 30W CW and camera - Electric lift door – auto-focus – compact machine size - - Developed and manufactured in Germany - Further models, power ratings, and options available on request. Engraving laser – marking laser – laser marker with "Laser Class 1" protective enclosure. Our JEWELliner "XS-PRO" model "Premium" marking laser is suitable for marking and engraving all metals, select plastics, and ceramics. The machine dimensions are L60 x W40 x H50 cm, allowing for space-saving integration into production environments. Applications: Jewelry, metal, and advertising industries. Material examples: Steel, stainless steel, gold, silver, titanium, aluminum, brass, copper, bronze, carbon, ceramics, Makrolon. Application possibilities: - Graphic engraving (logo, drawing, hand-drawing) - Photo engraving - Barcode (bar code, Data Matrix, QR code) - Serial number marking - Inner ring engraving (e.g., name, date, symbol, handwritten)—optional - Outer ring engraving (e.g., name, continuous graphic, continuous pattern)—optional - Bangle engraving inside and/or outside—optional - Text engraving (straight text, circle text, text arc, text symbols) - Handwriting engraving - Fingerprint engraving - Micro engraving (microtext down to min. 0.25 mm character height) - Rotary engraving (marking on round or curved surfaces)—optional Pjdpfxjppxmke Ai Ajgr Compact construction, all components integrated in the housing and efficiently air-cooled! The machine is maintenance-free! Standard equipment JEWELliner "XS" PRO (BN30XS-HRA): - Fiber laser unit with deflection head and focus module - Laser Class 1 safety housing with 200x140 mm viewing window - Automatic door opening - Emergency stop switch - 180° view of the marking area within the housing - Z-axis with auto-focus – motorized - Rotary axis with removable jewelry chuck - Incl. marking software (final configured) - High-resolution industrial camera USB 3.1 Technical specifications / data: Laser type: fiber laser Output power CW: 30W Available frequency range: 1.8 - 2,000kHz Connection type: USB 2.0 Wavelength: 1064nm Lens (delivered): F-Theta 163 Marking field size: 110 x 110 mm (smaller sizes available) Focusing range: approx. 1.7 mm Min. character height: 0.25 mm Min. line width: 0.023 mm Cooling: air-cooled Maintenance: maintenance-free Power supply: AC 110V/240V – 50/60Hz, short-circuit proof Dimensions: L600 x W400 x H500 mm Weight: approx. 55 kg The marking laser is ready for operation immediately after delivery and can be quickly integrated into your own production process. We are also happy to produce engraving samples for you. Images and illustrations may differ.

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: BN20XS "Standard", dolžina gredi: 1.064 mm, teža obdelovanca (maks.): 5 kg, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 20 W, vrsta hlajenja: zrak, skupna širina: 400 mm, skupna višina: 500 mm, skupna dolžina: 600 mm, delovno območje: 70 mm, skupna masa: 30 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, maks. debelina aluminijaste pločevine: 3 mm, širina odprtine vrat: 400 mm, višina odprtine vrat: 350 mm, pomik po osi Z: 100 mm, JEWELliner "XS2" model: "Standard" with 20W CW laser power. - Developed and manufactured in Germany (proven) - Pgjdpfjppxlmjx Ai Aor Other models, laser powers, and options available on request. Engraving laser – marking laser – laser marking system with “Laser Class 1” protective housing. Our JEWELliner "XS2" marking laser is suitable for marking and engraving all metals, selected plastics, and ceramics. The compact housing size of L50 x W40 x H50 cm allows for space-saving integration into production environments. Applications: Jewelry, metal, and advertising industries Sample materials: Steel, stainless steel, gold, silver, titanium, aluminum, brass, copper, bronze, carbon, ceramics, Makrolon Application possibilities: - Graphic engraving (logos, drawings, hand sketches) - Photo engraving - Barcode (barcode, data matrix, QR code) - Serial number marking - Optional: inner ring engraving (e.g. name, date, symbol, handwriting) - Optional: outer ring engraving (e.g. name, continuous graphic, continuous pattern) - Optional: bangle engraving (inside and/or outside) - Text engraving (straight text, circular text, arched text, text symbols) - Handwriting engraving - Fingerprint engraving - Micro-engraving (micro text, minimum font size 0.15 mm) - Optional: rotary engraving (marking on round or curved surfaces) Compact design—all components are installed in the housing and sufficiently air-cooled! The machine is maintenance-free! Standard equipment JEWELliner "XS2" (BN20XS2-HR): - Fibre laser unit with deflection head and focus module - Laser Class 1 protective housing with 140 x 100 mm protective viewing window - Manual door opening - Emergency stop switch - 180° field of view of the marking area inside the housing - Electrically adjustable Z-axis - Includes marking software (configurable) - Rotary axis included Technical specifications/data: Laser type: fibre laser CW output power: 20W Available frequency range: 28-64kHz Connection type: USB 2.0 Wavelength: 1064nm Standard lens: F-Theta 163 Marking field size: 70 x 70 mm (smaller sizes possible) Focal range: approx. 1.0 mm Minimum character height: 0.15 mm Minimum line width: 0.020 mm Cooling: air-cooled Maintenance: maintenance-free Power supply: AC 110V/240V – 50/60Hz, short-circuit proof Dimensions: L500 x W400 x H500 mm Weight: approx. 30kg The marking laser is ready for operation immediately after delivery and can be quickly integrated into your production process. Sample engravings can be produced on request. Images and illustrations may vary!

Stanje: novo, Leto izdelave: 2025, Are you looking for a genuine nameplate laser marking machine and not a toy? Then you are in the right place: (* Prices depend on equipment and laser power; this is a brand-new laser machine manufactured by us) skyLaser Mark Laser Marker - 20W 2D software, optional 3D fiber laser engraver/marking laser is the complete solution for your complex laser processing needs - Nameplate Laser Machine Please note, compare the installed components in the offered laser systems: Scanlab® scanner, IPG Photonics® laser, Parker® axes, Schneider Electric® motors, Scanlab® controller, German software, cables – all components are exclusively made in Germany! The laser systems are 100% custom-built to customer specifications at our plant in Plauen! Competitors often use Chinese-made components (starting with the controller: EZCAD = Chinese origin!) (* The price may vary depending on configuration. Images show different equipment options. You will receive a brand-new laser machine directly from our factory.) Ideal solution for: - Product marking - Laser marking - Laser engraving - Laser cleaning - Laser ablation Our skyLaser Mark nameplate laser systems are used exactly where conventional CO2 laser technology reaches its limits. Using a fiber laser with a wavelength of 1064nm, even the finest structures can be created in almost any material. The advantage in your application is geometric flexibility and high processing accuracy. Regardless of the hardness of the workpiece, this type of processing can be applied. The adjustable and mobile worktable further increases system flexibility. You can easily integrate the system into your production line or use it as a stand-alone solution. Our skyLaser Mark provides highly precise and durable markings (laser engravings) and is especially suitable for the nameplate laser machine application area: metals and certain organic materials. A wide variety of fonts can be used, and applying barcodes, serial numbers, logos, and images is effortless. Thanks to the outstanding resolution, virtually all marking requirements can be fulfilled. The production of embossing stamps, engravings, labels, and complex fine structures is made easy with extremely user-friendly software. Even very complex and demanding marking tasks can be easily set up on the supplied industrial PC. Precise positioning is quick and simple, thanks to the optional observation camera for process monitoring and software-assisted workpiece alignment. As the system has virtually no wearing parts and, thanks to IPG laser technology, is nearly maintenance-free, it is particularly suitable for industrial applications and continuous operation. skyLaser Marking/Engraving Laser at a Glance: Pgedpfodgfgcox Ai Ajr Working area: from 110 x 110 mm, or 120 x 120 mm, up to 300 x 300 mm (F-Theta lenses dependent / 3D option) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W

Stanje: novo, Leto izdelave: 2025, Are you looking for a real machine and not a toy? Then you’ve come to the right place: Film labelers – Label printers – Nameplate marking machines (*Prices vary depending on configuration and laser power; this is a brand-new laser machine manufactured in-house) Laser Marker skyLASER Mark 500 – 2D Fiber Laser Engraving/Marking System: The complete solution for your complex laser engraving applications. Important: Compare the installed components in available laser systems. We use ONLY top-quality German-made components: Scanlab® scanner, IPG Photonics® laser source, Parker® axes, Schneider Electric® motors, Scanlab® controllers, German software, cabling – all components produced exclusively in Germany! All machines are 100% custom-built at our factory in Plauen according to your specifications! Competitors often use Chinese components (note: the controller is often EZCAD = Chinese origin!!) (*The stated price may vary depending on configuration; pictures show different equipment variants. You receive a brand-new laser unit, manufactured by us.) Our skyLASER Mark systems are used precisely where conventional CO2 laser technology reaches its limits. The fiber laser with a 1064nm wavelength enables even the most intricate work on almost any material. Unlike traditional milling processes, the laser works contact-free, force-free, and with no tool wear. The clear benefits for your application: geometric flexibility and high processing accuracy. This processing method can be applied regardless of the workpiece’s hardness. The mobile, customizable working table further increases system flexibility. Easily integrate the system into your production line or use it as a stand-alone solution. Our skyLASER Mark units deliver extremely precise and durable markings (laser engravings) and are especially suitable for metal marking and selected organic materials. A wide range of fonts, barcodes, serial numbers, logos and images can be applied effortlessly. Thanks to excellent resolution, virtually all marking requirements are met. Whether you need embossing dies, engravings, labels or complex fine structures – our extremely user-friendly software makes it easy. Even demanding, intricate marking tasks are quick and simple on the included industrial PC. Accurate positioning is straightforward, thanks to the optional process monitoring camera and software-assisted part alignment. With virtually no wear parts and IPG laser technology for near-zero maintenance, this system is ideal for industrial and continuous operation. skyLASER Mark Marking/Engraving System at a glance: Pgedpocuiz Tefx Ai Asr - Working area: from 110 x 110 mm, 120 x 120 mm, or 300 x 300 mm (depending on F-Theta lenses/3D option) - Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) - SCANLAB galvanometer scanner - Nominal laser power: 20W - New, optional: software-controlled, variably adjustable working width (X-axis max. 450 mm depending on configuration)

Stanje: novo, Leto izdelave: 2025, 2D / 3D laser engraver Pedpfx Ao Sd Ubei Aogr skyLaser Mark - 2D with optional 3D fiber laser engraving/marking system is the complete solution for your complex laser engraving applications.