Cts Kamera Za Temperaturni Šok Testiranje nakup rabljenega (86.484)

Stanje: zelo dobro (rabljeno), CTS Temperature Shock Test Chamber Model: TSS-70/32 Manufacturer: CTS Klima Temperatur Systeme Design: Air-cooled For sale is a CTS temperature shock test chamber for thermal cycling and shock testing in industrial, research, and development settings. Technical Data: Test chamber volume: approx. 32 liters Maximum specimen weight: approx. 10 kg Temperature ranges: Hot chamber: +50 °C to +200 °C Cold chamber: -80 °C to +100 °C Performance data: Heating rate: approx. 6 K/min Cooling rate: approx. 6 K/min Temperature transition rate: up to approx. 100 K/min Transition time: < 10 seconds Temperature deviation: ±1 K / ±2 K Electrical data: Connection: 400 V / 3/N / 50 Hz Nominal power: approx. 9.7 kW Nominal current: approx. 15.4 A Fusing: 16 A slow-blow Pjdpfx Ajy I Ntcsa Dopt Protection class: IP 22 Refrigerants: R404A: 2.3 kg R23: 0.90 kg Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Dimensions: Approx. 1325 x 2012 x 1820–2020 mm (W x D x H) Weight: Approx. 650 kg Additional data: Sound pressure level: < 58 dB(A) Compressed air connection: 1/4" male thread Equipment: Two-chamber system (hot / cold chamber) Digital CTS controller Display / control panel Program operation Operating hours counter Viewing window Internal lighting Temperature limiter Specimen protection RS232 interface Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram available Piping diagram available Quick instruction available Safety data sheets available Note: The table shown in the photos is not included in the sale. Condition: Used Visual condition as shown in the pictures Scope of delivery as depicted Inspection by appointment is possible. Loading can be arranged. Commercial sale. Sale without warranty. (Subject to changes and errors)

Stanje: zelo dobro (rabljeno), Weiss Temperature Shock Test Chamber We offer you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, air-cooled (The compressor has been replaced!) Specification: - Temperature range, hot chamber: +60°C to +220°C - Temperature range, cold chamber: -10°C to -80°C - Transition hot/cold chamber: 10 s - Temperature stability: ±1 K Dimensions and further data: - External dimensions: height 1990 mm - Width (without/with swing arm): approx. 1820 mm / approx. 1915 mm - Depth (without/with test chamber door): approx. 900 mm / approx. 1155 mm Ppsdpfxsk E Htys Aa Dot - Lifting basket (test chamber) dimensions: height 450 mm, width 500 mm, depth 600 mm - Volume: 130 liters - Max. load for test chamber: 20 kg - Max. load for test chamber floor: 20 kg - Cooling water pressure: min. 2 to max. 6 bar - Max. pre-fuse: 35 A (32 A CEE plug) - Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) - Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW - Rated current: 26.0 A - Refrigerant: R 404A / R23 - Weight: approx. 950 kg - Type: TS 130 - Condition: used - Scope of delivery: (see picture) (Specifications and technical details subject to change and errors reserved!) If you have any further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), RS-Simulators Thermal Shock Chamber ST2K 1000 / 55 The system was regularly maintained and serviced by the manufacturer until it was decommissioned. Device Data Manufacturer: RS-Simulators Model: ST2K 1000 / 55 Type: Thermal Shock Chamber Cooling: Water-cooled Description Used thermal shock chamber for standard-compliant thermal shock testing. Suitable for material, component, and reliability tests. Usable in industry, automotive, research, and quality assurance applications. System Description - Two separate temperature chambers (hot / cold) - Automatic horizontal test basket transfer - Fast changeover operation for thermal shock tests Temperature Ranges - Hot chamber: +40 °C to +180 °C - Cold chamber: -70 °C to +100 °C - Time deviation: ±0.8 K Test Chamber - Volume: approx. 580 liters - Internal dimensions (W x H x D): approx. 1070 x 680 x 800 mm - Max. load: approx. 150 kg Power Supply - 400 V / 3~ / N / PE / 50 Hz - Power: max. 33 kVA - Current consumption: max. 65 A Media Connections - Cooling water: G 1", approx. 3 bar (max. 10 bar) - Cooling water requirement: max. 3.2 m³/h - Cooling water return: non-pressurized - Compressed air: NW 7.2, 4–10.5 bar Dimensions - External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight - Approx. 2800 kg Equipment - Horizontal basket movement - C-rails in the test chamber - Large test basket (>1000 mm) - Viewing window - Interior lighting - SE-604 controller - Program operation and data logging - RS232 interface Refrigeration System - Refrigerants: R449A / R23 - R449A: approx. 8.0 kg - R23: approx. 2.5 kg Operating Data - Operating hours: approx. 4,500 h - Sound level: approx. 67 dB(A) Ppodpoy H Igfsfx Aa Dot Ambient Conditions - Temperature: +12 °C to +30 °C - Humidity: 25% to 75% rH Scope of Delivery - RS-Simulators Thermal Shock Chamber ST2K 1000 / 55 - Scope of delivery as shown Optional Pre-shipment Service - Functional test - Refrigerant service - Leak test - Trial run with protocol Condition Used. Condition as shown in the images. Note Used device, sold without warranty. Inspection by appointment possible. Loading and transport can be arranged upon request. Subject to prior sale and technical changes. If you have any questions, please feel free to contact us.

Stanje: rabljeno, Espec Model: TSD-100 100 litres usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range heating chamber: +60°C to +200°C Temperature range cooling chamber: -70°C to 0°C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Over-temperature protection Operating hours counter Mobile design 2 stainless steel specimen baskets Cable port Ø 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Ppedsxugq Aopfx Aa Dot Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg For your safety as a buyer, please note the following information! The following points are performed on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and information!) If you have any further questions, we will be happy to answer them by phone.

Stanje: dober (rabljeno), Leto izdelave: 1999, Nema NCG 4390 S temperaturni šok komora -40°C do +180°C Proizvajalec: Nema Tip: NCG 4390 S Temperaturno območje: -40°C do +180°C Območje rosišča: +5 °C do +89 °C Omrežna napetost: 400 V Nazivni tok: 32 A Nazivna moč: 15 kW Hladilno sredstvo: R 404 A Letnik: 1999 Teža: 2720 kg Zunanje dimenzije: Š 3950 x G 1700 x V 2280 mm Komora: Š 3000 x G 1300 x V 1170 mm WLG DAMPF-O-MAT Avtomatski električni parni zračni vlažilec in generator pare brez mineralov in vonja Proizvajalec: WLG DAMPF-O-MAT Tip: EDB 8 Grelnik napetost: 400 V Moč: 6 kW Količina pare: 8 kg/h Vodno hlajeni kondenzator Proizvajalec: Bitzer Vodno hlajen Omrežna napetost: 400 V Nazivni tok: 13 A Nazivna moč: 4 kW Pjdpfxsuzgt Es Aa Dopt Hladilno sredstvo: R 404 A Teža: 145 kg KK-08 Možno je financiranje prek naše banke. komplett-konzept.leasingo.de Dodatni artikli - novi in rabljeni - so na voljo v naši trgovini! Stroški mednarodne dostave na zahtevo!

Stanje: zelo dobro (rabljeno), Here we offer you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Air-Cooled Specification: Temperature range hot chamber: +60°C … +220°C Temperature range cold chamber: -10°C … -80°C Transfer time hot/cold chamber: 10 s Temperature constancy: ±1 K Ppodolgux Ajpfx Aa Djt Dimensions and additional data: External dimensions: Height 1990 mm Width (without and with door hinge): without approx. 1820 mm / with approx. 1850 mm Depth (without and with test room door): without approx. 900 mm / with approx. 1155 mm Basket dimensions (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Maximum test chamber load: 20 kg Maximum floor load in test chamber: 20 kg Cooling water pressure: min. 2 ... max. 6 bar Maximum main fuse: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of device: approx. 65 dB(A) Cooling cascade: water-cooled Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information not binding!) If you have any further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Espec Model: TSD-100 100 liters usable volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range (hot chamber): +60°C to +200°C Temperature range (cold chamber): 0°C to -70°C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrost Overtemperature protection Operating hours counter Mobile version (on castors) Ppedpfx Aaeugl H Se Djt 2 stainless steel specimen baskets Cable feedthrough, Ø 100 mm Refrigerants: R404A 1 kg, R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer a temperature shock test chamber with a usable volume of 100 liters, suitable for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Temperature range, hot chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Program control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design 2 stainless steel test specimen baskets Cable feedthrough Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. power consumption: 32A Type: TSD-100 Condition: used Scope of delivery: (See picture) (Technical changes and errors excepted!) If you have any further questions, feel free to contact us by phone. Podpen Smtmsfx Aa Dopt

Stanje: zelo dobro (rabljeno), Weiss Thermal Shock Test Chamber We are offering you a thermal shock test chamber. Weiss Thermal Shock Test Chamber, water-cooled Specifications: Temperature range, hot chamber: +60°C to +220°C Temperature range, cold chamber: -10°C to -80°C Transition between hot/cold chamber: 10 s Temperature stability: ±1 K Dimensions and further data: Pedpfelmkn Tex Aa Dspt External dimensions: Height 1990 mm Width (without and with door hinge): without approx. 1820 mm, with approx. 1850 mm Depth (without and with test room door): without approx. 900 mm, with approx. 1155 mm Basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Maximum test chamber loading: 20 kg Maximum load on test chamber floor: 20 kg Cooling water pressure: min. 2 ... max. 6 bar Maximum pre-fuse: 35 A (32 A CEE plug) Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) Cascade refrigeration, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz / 18.7 kW Rated current: 26.0 A Refrigerants: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (see image) (Technical data subject to modifications and errors!) Further questions can gladly be answered by phone.

Stanje: zelo dobro (rabljeno), Weiss Temperature Shock Test Chamber We are offering you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, water-cooled Specification: Temperature range hot chamber: +60°C to +220°C Temperature range cold chamber: -10°C to -80°C Transfer between hot/cold chamber: 10 sec. Temperature constancy: ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width (without/with door hinge): without approx. 1820 mm / with approx. 1850 mm Depth (without/with test chamber door): without approx. 900 mm / with approx. 1155 mm Internal basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Max. chamber load: 20 kg Max. floor load test chamber: 20 kg Cooling water pressure: min. 2 to max. 6 bar Max. main fuse: 35 A (32 A CEE plug) Sound pressure level, 1 m in front of unit: approx. 65 dB(A) Cascade refrigeration, water-cooled Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Podpfxom Ak H Ho Aa Dept Scope of delivery: (see picture) (Changes and errors in technical data and information excepted!) For further questions, we are happy to answer your call.

Stanje: zelo dobro (rabljeno), Here we offer a Vötsch shock test chamber. Temperature shock test chamber, water-cooled Two-chamber design Hot chamber: Temperature range for the hot chamber: +50°C to +220°C Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold chamber: Temperature range for the cold chamber: -80°C to +70°C Psdpfx Aajigg Hno Djpt Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions (W x D x H): 470mm x 650mm x 410mm External dimensions (W x D x H): 930mm x 2115mm x 1970+mm Port diameter: 67mm Nominal power: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Type: VT 7012 S2 Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and error!) If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), RS Simulators Type: ST2K320/45 Water-Cooled Shock Test System Operating Climate Range Temperatures in Upper Test Chamber: Temperature range: +40 °C to +180 °C Temperatures in Lower Test Chamber: Temperature range: -40 °C to +100 °C Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 1100 mm, Height 2300 mm, Depth 2300 mm Test Chamber Dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical Supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A / 2.5 kg Weight (Chamber): approx. 850 kg For your security as a buyer, please note the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new charge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Ppsdpfx Astqcu Eea Djt Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in the technical data, all information is non-binding!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), RS Simulators Model: ST2K320/45 K Water-cooled shock test chamber Temperatures in upper test chamber: Temperature range: +40 °C to +180 °C Temporal deviation: ±0.8 K according to DIN 50011 with empty chamber Temperatures in lower test chamber: Temperature range: -40 °C to +100 °C Temporal deviation: ±0.8 K according to DIN 50011 with empty chamber Humidity in upper test chamber: Climatic temperature range: +40 °C to +90 °C Humidity range: 20% to 98% (±2 to 5%) relative humidity Humidity: 25% to 75% relative humidity Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 900 mm, Height 2000 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical supply: Total power: 13 KVA Current draw: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber weight: approx. 950 kg Podpfx Aaetrf Ulo Dspt Important information for you as the buyer for your safety! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Changes and errors in technical data and specifications excepted!) We will be happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Product description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. This chamber is ideal for rapid temperature change testing (e.g. according to IEC, MIL‑STD, JEDEC standards) and has been well maintained. Volume & Internal Dimensions: Ppjdpfx Aasxr A R Tj Djt Test volume: 60 litres Internal dimensions (basket/test chamber, W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature Ranges & Cycling: Hot chamber: +50 °C to +220 °C Cold chamber: −72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate: up to 17 °C/min Cooling rate: up to 3.7 °C/min In single mode (cold zone only) heating rate: approx. 3.2 °C/min Temperature Deviation & Homogeneity Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / Payload & Lift System Basket/lift system load: 20 kg maximum load capacity Transfer basket secured by protective grid on all sides Additional Features & Equipment Noise level: approx. 58 dB(A) during operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical Connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A External fuse: 32 A Refrigerants R-404A / R-23 Weight: 800 kg For your security as the buyer, the following procedures are performed on every chamber we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Stanje: dober (rabljeno), Leto izdelave: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber -80 °C to +220 °C The Vötsch VT 7030 S2 environmental test chamber is designed for laboratory applications that require testing of materials and components under controlled conditions. With its versatile capabilities and user-friendly controls, this programmable unit can simulate a wide range of environmental conditions for scientific research, product testing, and process control. Single-Chamber Operation Data for Temperature Testing Hot Chamber: Temperature Shock Test Chamber, volume: 300 l Temperature range: +50 °C to +220 °C Temporal temperature deviation at the center of the workspace: ±1 K Spatial temperature deviation: ±2 K Temperature gradient (according to IEC 60068-3-5): 4 K Rate of temperature change (according to IEC 60068-3-5, measured in supply air): Heating: 11 K/min Cold Chamber: Temperature Shock Test Chamber, volume: 300 l Temperature range: -80 °C to +70 °C Temporal temperature deviation at the center of the workspace: ±1 K Spatial temperature deviation: 2 K Temperature gradient (according to IEC 60068-3-5): 4 K Rate of temperature change (according to IEC 60068-3-5, measured in supply air): Heating: 1.5 K/min Cooling: 4 K/min Technical Specifications: Temperature Shock Test Chamber Test chamber volume: approx. 300 l Ppsdswbdv Sspfx Aa Dst Voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 30 kW Rated current: 50 A Refrigerant: R-404a / R-23 Cooling system: water-cooled Weight: approx. 940 kg Year of manufacture: 1998 Test chamber internal dimensions: width 770 mm x depth 650 mm x height 610 mm Overall dimensions: width 1200 mm x depth 1800 mm x height 2050 mm TS 05 Financing through our partner bank is also available. komplett-konzept.leasingo.de You can find more articles – new and used – in our shop! International shipping costs available on request!

Stanje: dober (rabljeno), Resato HBU-B160 High-Pressure Gas Workshop Test System In the oil and gas industry, everything revolves around the extraction of crude oil and natural gas. One of the challenges is to optimize the use of facilities in order to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure testing ensures the quality and safety of components used in oil and gas production. By injecting a chemical fluid, the well is stimulated. With its controls, the high-pressure system manages and regulates backpressure and liquids. This enables safer extraction of oil and gas. Manufacturer: Resato Test system: HBU Podpjr Hmihofx Aa Dept Model: HBU-B160 Max. pressure: 200 bar Max. capacity: 1570 cc/ Max. pressure: 7 bar 2 x gas cylinder holders 3 x gas cylinder trolleys Digital control panel missing Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more new and used items in our shop! International shipping costs on request!

Stanje: rabljeno, Weiss Type: TS 130 Temperature Shock Test Chamber, Water-Cooled Specification: Ppjdpfsvwckhsx Aa Det - Temperature range hot chamber: +60°C to +220°C - Temperature range cold chamber: -10°C to -80°C - Transfer between hot/cold chamber: 10 sec. - Temperature stability: ±1 K Dimensions and further data: - External dimensions: Height 1990 mm - Width (without and with door hinge): without approx. 1820 mm / with approx. 1850 mm - Depth (without and with test chamber door): without approx. 900 mm / with approx. 1155 mm - Basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm - Volume: 130 liters - Maximum test chamber load: 20 kg - Maximum floor load in test chamber: 20 kg - Cooling water pressure: min. 2 ... max. 6 bar - Max. circuit protection: 35 A (plug 32 A CEE) - Sound pressure level, 1 m in front of unit: approx. 65 dB(A) - Refrigeration cascade, water-cooled - Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW - Rated current: 26.0 A - Refrigerants: R404A / R23 - Weight: approx. 950 kg Condition: used Scope of delivery: (see picture) (Changes and errors in technical data reserved!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Premer kolesa - maks. 200 mm Širina kolesa 300 mm Modul 0,5 - 25 Razdalja med konicami 750 mm Teža stroja cca 0,2 t Potrebni prostor cca 0,8 x 0,6 x 0,6 m Ppedpfoy Umi Iex Aa Dst Naprava za preizkušanje polžev Preverja se: oblika bokov, kot tvorbe bokov, delilna razdalja osi, višina vzpona, širina zobne reže, višina zoba, tek v bokih.

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), Na voljo je avtomatska testna postaja za filtre Lorenz za avtomatsko testiranje filtrirnih medijev, polmask, kanistarskih filtrov in medicinskih obraznih mask. Standardi: EN143/EN149/EN14683/ISO16900-3 in več, modulne komponente: merilnik pretoka/fotometer pred in po preizkušanem izdelku/generator aerosola/enota za sesanje in odsesavanje, aerosoli: parafinsko olje/Emery olje/DOP/DEHS, območje volumenskega pretoka: 8L-300L/min, min. merilno območje filtracijske učinkovitosti: 0,0001%, min. merilno območje dihalnega upora: 5Pa-1000Pa, največja hitrost filtrirnega zraka: 10,2cm/s, največja preizkusna površina: 237,8cm³. Naprava je bila malo uporabljena in ne potrebuje vzdrževanja. Dokumentacija je na voljo. Možen je ogled na lokaciji. Slika je vzorčna. Pedpfx Asy Tx Slja Dspt

Stanje: rabljeno, ETS MPA102/L620M Shaker Vibrationsprüfung & Horstmann HS 220 Klimaprüfschrank Prüfsystem Vibrationsprüfsystem: ETS MPA102/L620M - Sinus-Schubkraft: 600 kgf - Rausch-Schubkraft: 600 kgf - Schockkraft (6 ms, Halbsinus): 1.200 kgf - Maximale Geschwindigkeit (Sinus): 2 m/s - Maximale Beschleunigung (Sinus): 981 m/s² - Armaturdurchmesser: 200 mm Ppodpfx Aey Sl Uqsa Dot - Erste Resonanzfrequenz: 3.300 Hz - Abmessungen: 943 x 633 x 770 mm - Schwingergewicht: 730 kg - Verstärkereinheit: 6 kVA - Lüftereinheit: HP-2 / 4 kW Klimaschrank: Horstmann HS220 - Prüfraumvolumen: 220 Liter - Prüfraumabmessungen: 600 x 600 x 600 mm (HxBxT) - Temperaturbereich: -40 bis +180 °C - Abkühlrate: 2 K/min, 3 K/min - Aufheizrate: 3 K/min - Elektrischer Anschluss: 400V, 3/N, 50 Hz / 5 kW - Außenmaße: 1630 x 1700 x 1200 mm (HxBxT) Gebrauchter Artikel – siehe Abbildungen. Versand: Die angegebenen Versandkosten gelten für Lieferungen innerhalb Deutschlands. Weltweiter Versand möglich (Versandkosten außerhalb Deutschlands bitte anfragen). Worldwide shipping available (please kindly request shipping costs). The given shipping costs apply to shipping within Germany. Verkauf ausschließlich an Gewerbekunden, ohne Gewährleistung oder Garantie. Abweichungen der technischen Angaben sowie Irrtümer in der Artikelbeschreibung sind möglich und bleiben vorbehalten.

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), A Seica Pilot V8 Next Series Flying Probe Tester with left inline handling module for vertical swiveling of the PCB and right inline handling module for horizontal swiveling and rotation of the PCB is available. Flying Probe Test System Seica Pilot V8 Next Series: PCB clamping system: manual, double-acting, active test area (manual): 538x610mm, active test area: 518x610mm, PCB dimensions: 540x610mm, min. PCB size: 20x20mm, PCB thickness: 0.3 to 5mm, max. component height: 37mm, PCB loading: vertical, UUT edge clearance manual/automatic: 2/6mm, length: 1750mm, width: 1030mm, height: 1995mm, weight: 1.4t. Test tools/techniques: FNODE signature analysis on the DUT networks, standard analogue and digital in-circuit test, fixtureless testing, JSCAN and OPENFIX for testing ICs for opens and shorts, PWMON network analysis with power on of the assembly, continuity tests to detect open connections on the assembly, visual tests for component presence, absence, and rotation detection, high-resolution color camera, optional functional and boundary scan test capabilities, optional on-board programming tools for digital components, complete documentation included. On-site inspection is possible. Ppedpfx Aey Sv S Hja Det

Stanje: rabljeno, Wheel diameter – max. 0-200 mm Pjdpfx Aastuxa Us Dopt Module – max. 25 Module – min. 0.5 with accessories and under-table Year of manufacture approx. 1995

Stanje: zelo dobro (rabljeno), emtest / AMETEK Automotive EMC Test System incl. Laptop & Software Manufacturer: emtest / AMETEK Type: Automotive EMC / On-board Network Test System Configuration: Mobile 19" industrial cabinet For sale is a professional test and simulation system from emtest / AMETEK for industrial applications in the fields of automotive, electronics testing, on-board network simulation, and EMC/EMI test engineering. The system is supplied with a laptop installed with control and test software, making it suitable for professional laboratory, development, and test bench applications. The system consists of several integrated test modules, fan units, and various power, control, and interface components. Visible identifiable components: Module 1: emtest AutoWave Module 2: emtest VDS 200Q Display designation: VDS 200Q100.2 Function per display: Voltage Drop Simulator Serial number per display: SWN 001638 AutoWave display info: Version 8.03.05 Out: 2 / In: 0 VDS 200Q display info: DC supply waveforms Firmware: V2.02.00 Generator: V2.01.01 Additional model designation per documentation: VDS 200Q100.2-208 Connections / Interfaces: Ethernet IEEE 488 USB VDS Frame Bus In / Frame Bus Out Analog In AutoWave CH1 / CH2 / CH4 0–10 V connection DC output / output terminals CEE power connection Emergency stop switch Features: Mobile industrial / 19" switch cabinet Multiple integrated fan units Front control and connection panels Rear power and interface connections Side emergency stop switch Industrial-grade design for laboratory, development, and test bench applications Possible application areas: Automotive test engineering On-board network simulation Voltage drop simulation Electronics and component testing EMC/EMI laboratory Research and development Quality assurance Test bench engineering Technical notes: Pedey Rlbhspfx Aa Dept Four-quadrant voltage drop simulator Suitable for automotive voltage profile testing Supports various automotive test standards such as LV 124, LV 148, ISO 7637-2, ISO 16750, and comparable norms Output range per documentation: -20 V to +80 V Bandwidth up to 250 kHz Condition: Used device with age- and use-related signs of wear. Visual condition as shown in images. Device powers on, displays are active. A full technical function test under load has not been performed. Dimensions & weight: Dimensions and weight have not been precisely determined. Due to the mobile industrial cabinet design, an industrial-level weight should be expected. Exact dimensions and weights can be measured if required. Scope of delivery: emtest / AMETEK test system in a mobile industrial cabinet Laptop including installed control and test software AutoWave module VDS 200Q / VDS 200Q100.2 module Integrated fan and connection units Contents as shown in the images Notes: Inspection possible by appointment. Loading can be arranged. Commercial sale – sold without warranty. Subject to alterations and errors.

Stanje: rabljeno, prevoženi kilometri: 1.250 km, moč: 368 kW (500,34 KM), konfiguracija osi: 6x2, barva: rdeča, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, vzmetenje: zrak, Leto izdelave: 2025, Oprema: ABS, EBS (Elektronski zavorni sistem), klimatska naprava, Braking system For vehicle inquiries, Mr. Seidel will be pleased to assist you (by phone). Iveco S-Way AS260S50Y/FS 6x2-4 Curtain-Sider Box Body + Tail Lift Body: Böse curtain-sider box, BODY DIMENSIONS: Length x Width int. approx. 8,100 x 2,470 mm (designed for 20 euro pallets), side clearance height approx. 2,200 mm, continuous side walls. Full retraction via roof when opened. Loading platform height approx. 1,300 mm unladen. Two trailer hitches (1x 40 mm above, 1x 50 mm dropped). Axle configuration: 6x2P, 3 axles, trailing axle, CT cab. Version: AS MY, DR steering SX left-hand drive, EM emission standard Europe, EP engine: 500 C13 Cursor 13, 500 hp, Euro VI, GT transmission: TX-12M, 12-speed HiTroniX, automated. MT gross vehicle weight: 26 t, RT drive axle variant: SR single reduction, single axle. SU suspension: FP full air suspension. TF brakes: DIS-DIS disc/disc. TT additional axle: STER steered trailing axle, single tires. US application: STD standard, VE vehicle variant: CABINAT standard chassis with cab. WB wheelbase: 5100 mm. 78507 rocking mode (rock-free mode). 73131 DRIVE T. 315/70R22.5. 01539 front grille design: gun metal. 02326 painting of cab plastic parts in cab color. 04047 luggage compartment left and right. 01627 IVECO logo gunmetal grey. 79240 black decorative foil on doors. 00632 transparent sun visor, mounted outside on cab roof. 72270 lower bed single piece, firmness/feel – soft, with adjustable headrest. 78563 air horn behind bumper (pneumatic). 01743 upper bed with continuous mattress. 07599 axle weight variant: front axle 8,000 kg / rear axle 11,500 kg (technically feasible 12,000 kg) / trailing axle 7,500 kg. 02532 battery disconnect switch in cab, electrically operated. 02270 battery: 210 Ah high performance AGM. 78713 battery charging socket, terminals. 05679 AdBlue tank, 80 liters. 07806 trailer coupling, Ringfeder make. 05688 fuel tank 480 liters, left, aluminum. 06156 trailer hitch, 40 mm, 130 kN. 00351 edge protection at frame end. 01934 ECO NORMAL PERFORMANCE MODE. 78388 electrical interface for body, left on frame. 02548 side marker lights. 79454 preparation for additional headlights on cab roof. 75181 reverse warning buzzer, switchable. 05108 warning beacon. 00237 retarder / intarder for ZF or Allison automatic transmission. 52081 traffic red RAL 3020. 30804 printed documentation (operating manuals). 30184 tire manufacturer: Goodyear. 20294 tires: 315/70 R22.5. 26095 FUELMAX ENDURANCE S Pjdpfx Aaeyfpt As Dopt D. 79443 printed operating and maintenance manual. 72525 foldable table in passenger area. 01743 upper bed with continuous mattress. 04047 luggage compartment left and right. 72536 additional heater diesel/water 4KW. 72970 standard refrigerator and storage box. 72251 with curtains at bed. 00876 infotainment 10" TFT display + integrated Driver Pal. 02443 leather steering wheel. 01765 dashboard design: plastic with silver trim. 02759 air suspension for cab. 05629 sun-blind roller for side window, driver and passenger side. 02916 driver's seat HI-Comfort, multi-adjustable, air-suspended, integrated headrest and integrated height-adjustable seatbelt, lumbar support, with 3-level cooling or heating function. 72543 front headlights LED. 78715 LED tail lights. 72629 fog lights incl....

Stanje: zelo dobro (rabljeno), Memmert Model: CTC 256 Memmert Climate Test Chamber CTC 256 Temperature & Humidity Test Chamber Industrial Quality For sale is a high-quality climate test chamber / temperature test chamber manufactured by Memmert, model CTC 256. This unit comes from professional use and is ideally suited for laboratories, industry, research, development, and quality assurance. The Memmert CTC 256 is designed for precise simulation of temperature and climate conditions. It allows for both cooling and heating processes and – in this configuration – humidity control. This makes the device perfect for material testing, aging tests, climate stress tests, and long-term experiments under defined environmental conditions. Thanks to the integrated controller, complex testing programs with specific temperature and time profiles can be configured. The forced air circulation system ensures even temperature distribution within the chamber. Via the available interfaces, measurement data can be logged and processed externally. Features: Temperature and climate test chamber (heating & cooling) - Humidity regulation Electronic controller with program functions Forced air circulation for even temperature distribution Internal protocol memory USB and Ethernet interfaces 230 V auxiliary socket Cable port (side) Water tank system (humidification/condensate) Mounted on castors/mobile Technical data: Manufacturer: Memmert Model: CTC 256 Device type: Climate test chamber Temperature range: approx. -42 °C to +190 °C Internal volume: approx. 256 liters Operating voltage: 3N~ 400 V / 50 Hz Current consumption: approx. 10.6 A Pjdpfxey D Ni Aj Aa Dspt Power consumption: approx. 7000 W Protection class: IP20 External dimensions (approx.): 898 x 1730 x 1100 mm (W x H x D) Internal dimensions (approx.): 640 x 670 x 597 mm (W x H x D) Weight: approx. 300–350 kg Condition: used Scope of delivery: (see picture) Memmert CTC 256 Climate Test Chamber Insertion shelf Water canister Documentation Delivery as shown (Specifications subject to change and errors excepted!) Further questions can be answered by phone.