Cronosstech Hsb 3R 3100X250 nakup rabljenega (582)

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 9 mm, skupna masa: 5.400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up-down movement for rear and lower rolls Precision bending with braked main motor Conical and pre-bending system Lower and upper roll drive via planetary gearbox Rear roll ball system for easy sheet movement Compliance with EU safety directives High strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) User manual OPTIONAL EQUIPMENT Top crane (elevator) for support during large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual-speed operation Stepless speed adjustment Ejector system Hydraulic motor option Hfjdpfxew Slbvj Adrsh TECHNICAL SPECIFICATIONS Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 lt Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer zgornjega valja: 150 mm, premer stranskega valja: 130 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic upper roll opening head - Mobile control panel - Centrally driven rolls powered by motor - Hydraulic up/down movement for rear and lower rolls - Precision bending with braked main motor - Conical bending and pre-bending system - Lower and upper roll drive by planetary gearbox - Rear Roll Ball System to facilitate sheet movement - Compliance with EU safety directives - High-strength forged steel rolls made from certified SAE 1050 (CK45) steel - Hardened shafts - Digital readouts (2 units) - Operating manual OPTIONAL EQUIPMENT - Overhead crane for support during large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at shaft ends - NC control unit - Dual speed operation - Stepless speed adjustment - Ejector system - Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Hfodpfxoxw D Udj Adrsh Rolling Capacity: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 15 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary gearbox * Folded parts can be easily removed thanks to the hydraulically opening head * Very easy operation with mobile control panel * Lower rolls’ positions can be easily read via two digital displays * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Rolling system with roller bearings and conical mechanism * Hydraulic balancing system for parallel movement of the shafts * Extended shaft ends to allow installation of section and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (hoist) support for large diameter bending operations * Hydraulic side supports for large diameter bending operations * Ground and polished rolls for special applications * Section bending rolls for profiles * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of the shafts TECHNICAL SPECIFICATIONS Hsdjw Sld Ropfx Adrjfh Bending Length: 3100 mm Pre-bending: 10/13 mm Bending: 13/15 mm Top & Bottom Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 5150 mm Width: 1500 mm Height: 1550 mm Weight: 9050 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roller opening head Movable control panel Centrally driven rollers powered by motor Hydraulically movable rear roller and lower roller (up/down) Accurate bending with braked main motor Conical bending and pre-bending system Lower and upper rollers driven by planetary gearbox Rear roller ball system for easier sheet movement Compliance with EU safety directives High-strength forged steel rollers made of SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 pcs) User manual OPTIONAL EQUIPMENT Overhead crane for support during large diameter bending Hydraulic side supports for large diameter bending Ground and polished rollers Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375/1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg Hfedpfjw Slctjx Adreh

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 10 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up and down movement for rear roll and lower roll Precision bending with braked main motor Conical bending and pre-bending system Lower and upper rolls driven by planetary gearbox Rear Roll Ball System for easy sheet movement Compliance with EU safety directives High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 units) Operating manual OPTIONAL EQUIPMENT Top crane (hoist) for large diameter bending support Hydraulic side supports for large diameter bending Ground and polished rolls Hfsdpfjw Slcgox Adrjh Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. bending diameter: 375 / 1250 mm Motor power: 7.5 + 1.5 kW Bending speed: 5 m/min Tank capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overloading * All rolls are driven by hydromotor and planetary gearbox * Easy removal of bent parts thanks to hydraulically opening head * Very easy operation with movable control panel * Position of the lower rolls easily readable via two digital displays * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with bearings * Hydraulic balancing system for parallel movement of rolls * Extended shaft ends for mounting profile/tube bending rolls OPTIONAL EQUIPMENT * Upper crane (lift) for support during large-diameter bending * Hydraulic side supports for large-diameter bending * Ground and polished rolls for special applications * Section bending rolls for profile bending * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of rolls TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 12/16 mm Rolling/Bending: 16/18 mm Upper & Lower Roll: 300 mm Side Roll: 280 mm Hjdpow Slf Uefx Adrsfh Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 9 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium sheet, aluminum, or stainless steel materials Ideal for bending round and various diameter materials Lower and side rolls move vertically by direct hydraulic linear movement Protected against overloading The upper roll is driven by an electric motor and planetary reducer. The lower roll is powered via a cardan coupling system. Two rolls have powered rotation Positions of the rolls can be easily read via three digital displays The hydraulically opening head allows easy removal of the bent part Very easy operation with mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel shaft movement Complies with EU safety standards and is CE marked Operating manual OPTIONAL EQUIPMENT Remote assistance via NC control Top crane (elevator) for support during large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Dual speed adjustment system Stepless speed adjustment Hydromotor driven rotation Ejector system TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Hsdjw Slkkopfx Adrjfh Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 6800 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 20 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls are moved up and down via hydraulic cylinders attached to the frame, allowing linear motion * Protected against overloading Hsdpfew Smdfsx Adrjfh * Upper and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Easy removal of bent workpiece thanks to hydraulically opening head and automatic lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 12/16 mm Bending : 16/20 mm Top & Bottom Rolls : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 5350 mm Width : 1900 mm Height : 1950 mm Weight : 14,450 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 400 mm, premer zgornjega valja: 400 mm, premer stranskega valja: 300 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 30 mm, STANDARD EQUIPMENT * The top, bottom, and side rolls move up and down linearly via hydraulic cylinders attached to the machine frame * Protected against overload * Top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Easy removal of bent parts thanks to the hydraulically opening head and automatic lifting shaft * Highly user-friendly operation via movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed working system OPTIONAL EQUIPMENT * NC and CNC control for automation * Upper crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system Hedpfow Sl T Sex Adrofh * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 20/25 mm Bending: 25/30 mm Top & Bottom Roll Diameter: 400 mm Side Roll Diameter: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 550 mm, premer zgornjega valja: 550 mm, premer stranskega valja: 450 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 70 kW (95,17 KM), trajanje garancije: 12 meseci, Oprema: kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * The bottom and side rolls are hydraulically operated with pistons attached to the frame, providing linear up-and-down movement * Protected against overload * The top and side rolls are driven by hydromotors and planetary gearboxes (three-roll motor drive) * The positions of the rolls are easily read with three digital indicators * Hydraulic opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation via movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Hsdpfsxbzptox Adrjfh Bending Thickness : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium gauge sheet, aluminum, or stainless materials Highly suitable for bending round and various diameter materials Lower roll and side rolls move hydraulically up and down in direct linear motion Protected against overloading The top roll is driven by an electric motor and planetary gearbox. The lower roll is driven by a cardan coupling system. Two rolls are driven The positions of the rolls are easily read with three digital displays The piece can be easily removed thanks to the hydraulically opening head Very easy operation with the mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of the rolls Complies with EU safety regulations and bears the CE mark Operating manual OPTIONAL EQUIPMENT Remote assistance via NC control Overhead crane (elevator) for support during large diameter bending Hydraulic side supports for support during large diameter bending Ground and polished rolls Dual Speed Adjustment System Stepless speed adjustment Hydraulic motor-driven rotation Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 l Length: 4000 mm Width: 1500 mm Hfedpfxew Slxzj Adroh Height: 1370 mm Weight: 5350 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 460 mm, premer zgornjega valja: 460 mm, premer stranskega valja: 380 mm, dolžina valja: 4.100 mm, najv. debelina pločevine: 25 mm, moč: 38,5 kW (52,35 KM), STANDARD EQUIPMENT * The lower, top, and side rolls move linearly up and down by pistons hydraulically attached to the frame * Protected against overloading * Top and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * The positions of the rolls are easily readable via three digital displays * The hydraulically opening head and the automatically lifting shaft make it easy to remove the bent piece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK50) induction-hardened, forged, or rolled steel shafts * Conical bending system * Central lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT Hsdew Sl I Njpfx Adrefh * Automation with NC and CNC control * Top crane (elevator) for support in large diameter bending * Hydraulic side supports for support in large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 4100 mm Pre-Bending Thickness : 16/20 mm Bending Thickness : 20/25 mm Top & Bottom Roll : 460 mm Side Roll : 380 mm Motor Power : 38.5 kW Bending Speed : 1.5 - 5 m/min Length : 6950 mm Width : 2300 mm Height : 2350 mm Weight : 29500 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 25 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulic pistons attached to the frame * Protected against overload * Upper and side rolls are driven by a hydromotor and planetary gearbox (3-roll motor-driven) * Roll positions can be easily read with three digital readouts * The hydraulically opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC automation control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length : 2550 mm Hfsdpfx Ajw Smb Redroh Pre-bending : 16/20 mm Bending : 20-25 mm Upper & Lower Roll : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 4850 mm Width : 1900 mm Height : 1950 mm Weight : 12800 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 280 mm, premer zgornjega valja: 280 mm, premer stranskega valja: 220 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 16 mm, STANDARD EQUIPMENT * The lower, upper, and side rolls move vertically via pistons hydraulically connected to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotor and planetary gearbox (3 rolls motor-driven) * Roll positions are easily read with three digital displays * The hydraulically opening head and automatic rising shaft allow the workpiece to be easily removed * Easy operation with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Central lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) support for large-diameter bending * Hydraulic side supports for large-diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special jobs * Stepless speed control system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 10/12 mm Bending: 12/16 mm Top & Bottom Roll Diameter: 280 mm Side Roll Diameter: 220 mm Motor Power: 16.5 kW Hjdjw Smfcspfx Adrofh Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 320 mm, premer zgornjega valja: 320 mm, premer stranskega valja: 240 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 25 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT * The lower, upper, and side rolls move up and down linearly via pistons attached to the body hydraulically * Protected against overload * The upper and side rolls are driven by hydromotors with planetary gearboxes (all three rolls are motor-driven) * Easy roll position reading with three digital indicators * Easy removal of the bent workpiece thanks to the hydraulically opening head and automatically lifting shaft * User-friendly with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) to support large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications Hfodpfx Adsxw Eblsreh * Infinitely variable speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16 / 20 mm Bending : 20 / 25 mm Upper & Lower Roll : 320 mm Side Roll : 240 mm Motor Power : 20 kW Bending Speed : 1.5 - 5 m/min Length : 4350 mm Width : 1800 mm Height : 1950 mm Weight : 10,500 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 380 mm, premer zgornjega valja: 380 mm, premer stranskega valja: 300 mm, delovna širina: 3.100 mm, najv. debelina pločevine: 25 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * Lower, upper, and side rolls move up and down linearly via hydraulic cylinders attached to the frame * Protected against overloading * Upper and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor-driven) * Roll positions are easily read via three digital position indicators * Folded parts can be removed easily thanks to the hydraulically opening head and automatically lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620 -680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for support during large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Infinitely variable speed control system * Electronic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 16/20 mm Bending: 20/25 mm Upper & Lower Roll Diameter: 380 mm Side Roll Diameter: 300 mm Motor Power: 31.5 kW Bending Speed: 1.5 - 5 m/min Length: 5850 mm Hsdjxw Ecvjpfx Adrsfh Width: 2250 mm Height: 2350 mm Weight: 19200 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 460 mm, premer zgornjega valja: 460 mm, premer stranskega valja: 380 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 38,5 kW (52,35 KM), trajanje garancije: 12 meseci, STANDARD EQUIPMENT * The lower, bottom, and side rolls move linearly up and down via body-mounted hydraulic pistons * Protected against overloading * Top and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * Roll positions are easily readable via three digital indicators * Rolled parts are easily removed due to hydraulically opening head and automatic lifting shaft * Very user-friendly operation via movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top support crane (elevator) for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic plate ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic synchronization system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Hedpoxd S T Usfx Adrefh Top & Bottom Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19800 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 380 mm, premer zgornjega valja: 380 mm, premer stranskega valja: 300 mm, dolžina valja: 4.100 mm, najv. debelina pločevine: 16 mm, STANDARD EQUIPMENT * Lower, upper, and side rolls move up and down linearly via body-mounted hydraulic cylinders * Protected against overload * Upper roll and side rolls are driven by hydromotor and planetary gearbox (all three rolls are motor-driven) * Roll positions are easily readable via three digital displays * The hydraulically opening head and the automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation via mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending device * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC automation with control panel * Upper crane (hoist) support for large diameter bending Hfedpfx Adew Smc Ijreh * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending: 10/12 mm Bending: 12/16 mm Upper & Lower Roll Diameter: 380 mm Side Roll Diameter: 300 mm Motor Power: 31.5 kW Bending Speed: 1.5 - 5 m/min Length: 6950 mm Width: 2250 mm Height: 2350 mm Weight: 22,000 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 400 mm, premer zgornjega valja: 400 mm, premer stranskega valja: 300 mm, delovna širina: 2.550 mm, najv. debelina pločevine: 40 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT * The upper, lower, and side rolls move up and down linearly by means of pistons hydraulically attached to the frame. * Protected against overload. * The upper roll and side rolls are driven by a hydromotor and planetary gearbox (all three rolls are motor-driven). * The positions of the rolls are easily readable via three digital displays. Hsdpsxw Ebxefx Adrsfh * Easy removal of the rolled part thanks to the hydraulically opening head and the automatically lifting shaft. * Very easy operation with a movable control panel. * Welded steel construction frame. * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Cone bending system. * Central lubrication system. * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460). * Electronic balancing system (Ø500-550-580-620-680). * Dual-speed operation system. OPTIONAL EQUIPMENT * NC and CNC control for automation. * Top crane (elevator) for supporting large diameter bending. * Hydraulic side supports for supporting large diameter bending. * Hydraulic sheet removal system. * Ground and polished rolls for special applications. * Stepless speed adjustment system. * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460). TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 25/30 mm Bending: 30/40 mm Upper & Lower Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 5350 mm Width: 2250 mm Height: 2350 mm Weight: 17,800 kg

Stanje: dober (rabljeno), Hohner HSB 9000 digitalna linija za izdelavo knjižic Stroj je v zelo dobrem stanju in pripravljen za proizvodnjo. Leto izdelave: 2019. Natisnjenih je bilo le 0,4 milijona knjižic. To je eden najnovejših Hohnerjevih modelov. Celoten stroj se upravlja s krmilnoplošče. Proizvedeno v Nemčiji. Idealna naprava za učinkovit tisk knjižic v digitalni tiskarni. Zaslon na dotik za hitro nastavitev in brezžično daljinsko upravljanje. Hjdpfsy Sfbdex Adrjfh Stroj je opremljen z orodjem, rezervnimi deli in dokumentacijo.

Stanje: novo, Leto izdelave: 2026, moč: 7,5 kW (10,20 KM), stiskalna sila: 60 t, hod: 160 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 90 mm/s, globina grla: 320 mm, dolžina plošče bata: 2.100 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, Standard Equipment Stroke: 160 mm Daylight Opening: 380 mm Throat Depth: 320 mm Bending Length: 2100 mm Distance Between Columns: 1700 mm Machine Features - Dual-cylinder upper beam bending system - Rigid steel frame and upper beam construction for high static and dynamic stiffness - Upper beam movement supported by fiber slide bearings - High-strength balance shaft and eccentric bearing system ensuring parallelism - Mechanically controlled stroke system within the cylinder for motorized angle adjustment - Large working area suitable for various tool sets - Tonnage adjustment and bottom dead point stop via NC control unit - Hydraulic safety system against overpressure - Dual-speed working system: rapid approach, bending, and fast return - CE-compliant multifunctional foot pedal and emergency stop system - Compact hydraulic power unit with HAWE or Rexroth components - Remote service support with Siemens, Pizzato, and Balluff electrical equipment - LEUZE safety system and learning mode - NC control unit stores 500 programs with 200 lines per program - Easy program upload and download via USB - Standard upper and lower tool sets - NC-controlled motorized X-axis backgauge (600 mm) - Programmable and linear-guide backgauge system - 0.2 mm positioning accuracy - Motorized Y-axis angle adjustment - Movable control panel - Linear-guided front support arms - Lower die centering and clamping bolts - Programmable precise backgauge retract function Optional Equipment - Motorized R-axis - Special bending dies - Special pedal system for dual hand and foot operation - DSP or FIESSLER safety systems - Extended backgauge depth - Additional backgauge fingers - Additional front support arms - Manual crowning system - Motorized crowning system Technical Specifications Bending Force: 60 Tons Maximum Bending Capacity: 4 mm Bending Length: 2100 mm Distance Between Columns: 1700 mm Stroke: 160 mm Bending Speed: 10 mm/s Rapid Approach Speed: 90 mm/s Throat Depth: 320 mm Daylight Opening: 380 mm Table Width: 100 mm Table Height: 845 mm Main Motor Power: 7.5 kW X-Axis Motor: 0.75 kW Y-Axis Motor: 0.37 kW Optional R-Axis Motor: 0.25 kW Backgauge Depth: 600 mm Hsdpfx Aszcmbfjdrofh Oil Tank Capacity: 120 L Machine Length: 2450 mm Machine Width: 1600 mm Machine Height: 2235 mm Machine Weight: 4,340 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, moč: 3 kW (4,08 KM), stiskalna sila: 30 t, hod: 150 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 70 mm/s, globina grla: 255 mm, dolžina plošče bata: 1.270 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, Standard Equipment Stroke: 150 mm Daylight (Lower–Upper Beam Gap): 265 mm Throat Depth: 255 mm Bending Length: 1270 mm Distance Between Columns: 1010 mm Machine Features - Double-cylinder upper beam bending system - Steel machine frame construction ensures high static and dynamic rigidity - Upper beam movement supported by fiber slide bearings - High-strength balance shaft and eccentric bearing system support parallel movement - Mechanically adjustable stroke system within cylinder allows motor-controlled angle adjustment - Large opening and high stroke suitable for various die applications - Easy tonnage setting and bottom dead center stop via NC control - Hydraulic safety system against overpressure - Dual-speed operation with modes for rapid descent, bending, and rapid return - Multi-functional foot pedal with emergency stop, CE-compliant - Compact, top-mounted hydraulic power unit with HAWE or Rexroth components - Siemens, Pizzato, and Balluff electrical components - LEUZE safety system and learning mode - NC control unit with 500 program memory capacity, up to 200 lines per program - Program transfer via USB - Standard upper and lower die set - NC controlled motorized X-axis backgauge (500 mm) - Linear guide rear stopper system - 0.2 mm positioning accuracy - Motorized Y-axis angle adjustment - Movable control panel - Front support arms with linear guides - Lower die centering bolts - Programmable precise backgauge retreat function Optional Equipment - Motorized R axis - Custom bending dies - Special pedal system with dual hand + foot control - DSP or Fiessler safety systems - Extended backgauge travel distance - Additional backgauge fingers - Additional front support arm - Manual crowning system - Motorized crowning system Technical Specifications Bending Force: 30 Tons Maximum Bending Capacity: 4 mm Bending Length: 1270 mm Distance Between Columns: 1010 mm Stroke: 150 mm Bending Speed: 10 mm/s Rapid Descent Speed: 70 mm/s Throat Depth: 255 mm Daylight (Lower–Upper Beam Gap): 265 mm Table Width: 130 mm Table Height: 830 mm Main Motor Power: 3 kW X Axis Motor: 0.55 kW Hfsdpfx Aezcl S Nedrsh Y Axis Motor: 0.18 kW Optional R Axis Motor: 0.25 kW Backgauge Travel: 500 mm Oil Tank Capacity: 90 L Machine Length: 1780 mm Machine Width: 1375 mm Machine Height: 2160 mm Machine Weight: 1700 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Stanje: novo, Leto izdelave: 2026, moč: 15 kW (20,39 KM), stiskalna sila: 175 t, hod: 260 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 130 mm/s, globina grla: 410 mm, dolžina plošče bata: 3.700 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, HPB B175-3700 – 175 Ton x 3700 mm CNC Hydraulic Press Brake The HPB B175-3700 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is engineered for precise and repeatable sheet metal bending processes with a bending force of 175 tons and a bending length of 3700 mm. Standard Features - Stroke: 260 mm - Daylight (open height): 465 mm - Throat Depth: 410 mm - Bending Length: 3700 mm - Distance Between Columns: 3200 mm - ESA S830 CNC Control Unit - 10” 2D Touchscreen Display - Manual bending sequence and collision detection - Automatic crowning calculation - Angle measurement and correction - 2D drawing capability - 2 USB ports - Offline programming software CT-BEND Servo Motorized Backgauge - X-axis travel: 750 mm - Speed: 250 mm/s - Accuracy: ±0.05 mm - R-axis travel: 250 mm - Hardened ball screw - Linear guide system - Optional X-axis: 1000 mm Tooling System - 2 rear gauge fingers - European-type Promecam quick clamping system - CRONOSSTECH custom narrow lower table - Eurostamp ES1260 upper tool - Eurostamp ES2067 lower tool - Compatible with Amada tool system Standard Equipment - B Series open frame design - GIVI linear encoders - LED lighting - VDE electrical panel - Schneider or Siemens electrical components - HAWE hydraulic block - Eckerle pump - Siemens drive - Single pedal system - Energy-saving standby function - 2 adjustable front support arms Optional Features - CT-BEND X+R servo motorized backgauge - AKAS II front safety laser system - PLC safety module - Rear light curtains - Delem DA53Tx CNC control unit - CNC-controlled motorized crowning system - X-axis extension to 1000 mm Technical Specifications - Bending Force: 175 Ton - Bending Length: 3700 mm - Distance Between Columns: 3200 mm - Stroke: 260 mm - Daylight (open height): 465 mm - Throat Depth: 410 mm - Table Height: 955 mm - Machine Length: 5300 mm - Machine Width: 2430 mm - Machine Height: 2990 mm - Approach Speed: 180 mm/s - Return Speed: 130 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 180 L Hfjdpfx Adozb Inkjroh - Weight: 10,500 kg - Main Motor Power: 15 kW - X-axis Speed: 300 mm/s - R-axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. Country of origin: Turkey. 🇹🇷

Stanje: novo, Leto izdelave: 2026, moč: 22 kW (29,91 KM), stiskalna sila: 220 t, hod: 260 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 110 mm/s, globina grla: 410 mm, dolžina plošče bata: 6.100 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, HPB B220-6100 – 220 Ton x 6100 mm CNC Hydraulic Press Brake The HPB B220-6100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for the precise, powerful, and repeatable bending of long sheet metal parts, featuring a bending force of 220 tons and a bending length of 6100 mm. It is suitable for heavy industry, steel construction, energy, machinery manufacturing, and metalworking applications. The machine offers high efficiency with an ESA S630 CNC control unit, servo-driven backgauge system, European-style tooling clamping system, robust frame construction, and professional equipment. Standard Features - Stroke: 260 mm - Open Height (Daylight): 465 mm - Throat Depth: 410 mm - Bending Length: 6100 mm - Distance Between Uprights: 5100 mm - ESA S630 CNC Control Unit - 10" 2D touch graphic display - Manual bend sequence & collision calculation - Angle correction calculation - Angle measurement and correction - 2D drawing - 2 USB ports - Offline software - CT-BEND Servo Motorized X-Axis Backgauge - X-axis travel: 750 mm - X-axis speed: 250 mm/s - Accuracy: ±0.05 mm - Manual R-axis travel: 250 mm - Heavy-duty steel frame - Hardened ballscrew - Hardened linear guides - Optional X-axis travel: up to 1000 mm Tooling & Backgauge System - 2 straight type, 3-stage backgauge fingers - Manual Z-axis adjustment - European quick-release Promecam upper tool holder - Special narrow lower table by CRONOSSTECH - Standard upper tool ES1260, H: 67 mm, 85°, R: 0.8 mm - Standard lower die ES2067, 60 x 60 mm, V: 16-22-35-50 mm - Amada compatible tooling system Other Standard Equipment - B-series open-frame design - Black plexiglass safety panels - Single pedal control - GIVI linear encoders - LED illumination on upper beam - VDE electrical panel - Schneider or Siemens electrical components - Hoerbiger / HAWE hydraulic block - Eckerle pump - Siemens drive - Energy-saving standby function - 2 standard sliding front support arms Optional Features - AKAS II front safety laser system + PLC + rear light barriers - Delem DA53Tx 15” CNC control unit - Delem DA58Tx 18.5” CNC control unit - CNC-controlled motorized crowning system - X-axis extension up to 1000 mm - Additional front support arms - Additional backgauge fingers - Custom bending tools Technical Specifications - Bending Force: 220 tons - Bending Length: 6100 mm - Distance Between Uprights: 5100 mm - Stroke: 260 mm - Open Height (Daylight): 465 mm - Throat Depth: 410 mm Hodozbyvtjpfx Adrjfh - Table Height: 1060 mm - Machine Length: 7560 mm - Machine Width: 2570 mm - Machine Height: 3440 mm - Approach Speed: 150 mm/s - Return Speed: 110 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 290 L - Machine Weight: 20,000 kg - Main Motor Power: 22 kW - Backgauge X-axis Speed: 300 mm/s - Backgauge R-axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. Country of origin: Turkey.

Stanje: novo, Leto izdelave: 2026, moč: 4 kW (5,44 KM), stiskalna sila: 60 t, hod: 210 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 120 mm/s, globina grla: 410 mm, dolžina plošče bata: 1.250 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, HPB A60-1250 – 60 Ton x 1250 mm CNC Hydraulic Press Brake The HPB A60-1250 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, has been engineered for precision sheet metal bending applications, featuring a 60-ton bending force and a 1250 mm bending length. Equipped with the ESA S630 CNC control unit, servo motorized backgauge system, compact frame construction, and professional tooling, it delivers high accuracy and efficiency for workshops, metalworking companies, and industrial manufacturers. Standard Features - Stroke: 210 mm Hfedozbyu Nspfx Adrjh - Daylight (Open Height): 415 mm - Throat Depth: 410 mm - Bending Length: 1250 mm - Distance Between Columns: 1100 mm - ESA S630 CNC Control Unit (3-4 Axis) - 10” 2D touch graphic display - Manual bend sequence and collision control calculation - Angle correction calculation (Crowning) - Angle measurement and correction - 2D drawing support - 2 USB ports - Offline programming software - CT-BEND Servo Motorized X Axis Backgauge System - X axis travel: 750 mm - Speed: 130 mm/s - Accuracy: ±0.10 mm - Manual R axis travel: 190 mm - Steel frame construction - Hardened ball screw - Hardened linear guideway system - Optional: 1000 mm X axis Backgauge Fingers - Quantity: 2 - Flat type - 3-position (10 mm / 20 mm / 30 mm) - Manual Z axis movement - Anti-deflection support structure European Type Manual Promecam Upper Tool Holder E7 - Quick tool change - Safe operation - Safety structure to prevent tool drop CRONOSSTECH Special Narrow Bottom Table - 70 mm or 90 mm bottom table - Optional T-slot upon request Standard Upper Die ES1260 - Die height: 67 mm - Die angle: 85° - Radius: 0.8 mm - Material: C45 - Max. capacity: 100 Ton/Meter - Amada compatible Standard Lower Die ES2067 - 4-way V opening (16-22-35-50 mm) - Die height: 60 mm - Die angle: 85° - Material: C45 - Max. capacity: 80 Ton/Meter - Amada compatible A Series Open Frame Design - CRONOSSTECH premium open frame - Wide viewing angle - Ergonomic design - Professional appearance Additional Equipment - Single pedal system (P2) - GIVI linear scales - Overhead LED lighting - Electrical panel to VDE standards - Schneider or Siemens electric components - Hoerbiger (HAWE) hydraulic block - Eckerle hydraulic pump - Energy-saving standby function Front Support Arms - 2 standard sliding front support arms - Height adjustable - Ruler measuring system - Operator support Optional Features - AKAS II Front Safety Laser System + PLC + Rear Light Barriers - Finger protection system - Laser-based safety system - Enhances operator safety - CE compliance - Max. working distance: 4.3 meters Technical Specifications - Bending Force: 60 Ton - Bending Length: 1250 mm - Distance Between Columns: 1100 mm - Stroke: 210 mm - Daylight (Open Height): 465 mm - Throat Depth: 410 mm - Table Height: 885 mm - Machine Length: 3060 mm - Machine Width: 2195 mm - Machine Height: 2730 mm - Approach Speed: 150 mm/s - Return Speed: 120 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 95 L - Machine Weight: 3400 kg - Main Motor Power: 4 kW - Backgauge X Axis Speed: 300 mm/s - Backgauge R Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷