Cronosstech 3100X15 Mm - 3 Zgornji Hidravlični Cilindri nakup rabljenega (105.823)

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 15 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary gearbox * Folded parts can be easily removed thanks to the hydraulically opening head * Very easy operation with mobile control panel * Lower rolls’ positions can be easily read via two digital displays * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Rolling system with roller bearings and conical mechanism * Hydraulic balancing system for parallel movement of the shafts * Extended shaft ends to allow installation of section and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (hoist) support for large diameter bending operations * Hydraulic side supports for large diameter bending operations * Ground and polished rolls for special applications * Section bending rolls for profiles * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of the shafts TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 10/13 mm Nwedpfx Aew Sld Rjh Uog Bending: 13/15 mm Top & Bottom Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 5150 mm Width: 1500 mm Height: 1550 mm Weight: 9050 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 1.550 mm, delovna širina: 1.550 mm, najv. debelina pločevine: 15 mm, najv. debelina jeklene pločevine: 15 mm, moč: 7,5 kW (10,20 KM), trajanje garancije: 12 meseci, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary gearbox * Folded parts can be easily removed thanks to the hydraulically opening head * Very easy operation with movable control panel * Position of lower rolls can be easily read with two digital indicators * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with bearings * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends to mount profile and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending Nsdpfxjxbzr Us Ah Uewg * Ground and polished rolls for special applications * Rollers for bending profiles * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-Bending: 10/12 mm Bending: 12/15 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Motor Power: 7.5 kW Bending Speed: 5 m/min Length: 3500 mm Width: 1200 mm Height: 1370 mm Weight: 3600 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overloading * All rolls are driven by hydromotor and planetary gearbox * Easy removal of bent parts thanks to hydraulically opening head * Very easy operation with movable control panel Njdsw Slf Uepfx Ah Uswg * Position of the lower rolls easily readable via two digital displays * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with bearings * Hydraulic balancing system for parallel movement of rolls * Extended shaft ends for mounting profile/tube bending rolls OPTIONAL EQUIPMENT * Upper crane (lift) for support during large-diameter bending * Hydraulic side supports for large-diameter bending * Ground and polished rolls for special applications * Section bending rolls for profile bending * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of rolls TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 12/16 mm Rolling/Bending: 16/18 mm Upper & Lower Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer zgornjega valja: 150 mm, premer stranskega valja: 130 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic upper roll opening head - Mobile control panel - Centrally driven rolls powered by motor - Hydraulic up/down movement for rear and lower rolls - Precision bending with braked main motor - Conical bending and pre-bending system - Lower and upper roll drive by planetary gearbox - Rear Roll Ball System to facilitate sheet movement - Compliance with EU safety directives - High-strength forged steel rolls made from certified SAE 1050 (CK45) steel - Hardened shafts - Digital readouts (2 units) - Operating manual OPTIONAL EQUIPMENT - Overhead crane for support during large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at shaft ends - NC control unit - Dual speed operation - Stepless speed adjustment - Ejector system Nwjdpfx Asxw D Udoh Ueg - Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Rolling Capacity: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 22 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary reducer * The hydraulically opening head allows for easy removal of bent workpieces * Very easy operation with movable control panel * The position of the lower rolls can be easily read via two digital displays * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with bearings * Hydraulic balancing system for parallel movement of the shafts * Extended shaft ends for mounting profile or pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special work * Rolls for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel movement of the shafts Nwsdpfx Ahow Slg Sj Ueg TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16/20 mm Bending : 20/22 mm Upper & Lower Roll : 300 mm Side Roll : 280 mm Motor Power : 11 kW Bending Speed : 5 m/min Length : 4100 mm Width : 1500 mm Height : 1550 mm Weight : 7400 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 550 mm, premer zgornjega valja: 550 mm, premer stranskega valja: 450 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 70 kW (95,17 KM), trajanje garancije: 12 meseci, Oprema: kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * The bottom and side rolls are hydraulically operated with pistons attached to the frame, providing linear up-and-down movement * Protected against overload * The top and side rolls are driven by hydromotors and planetary gearboxes (three-roll motor drive) * The positions of the rolls are easily read with three digital indicators * Hydraulic opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation via movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) Nsdexbzptjpfx Ah Ujwg * Dual speed operating system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending Thickness : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 380 mm, premer zgornjega valja: 380 mm, premer stranskega valja: 300 mm, delovna širina: 3.100 mm, najv. debelina pločevine: 25 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * Lower, upper, and side rolls move up and down linearly via hydraulic cylinders attached to the frame * Protected against overloading * Upper and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor-driven) * Roll positions are easily read via three digital position indicators * Folded parts can be removed easily thanks to the hydraulically opening head and automatically lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts Nwjdpfxsxw Ecve Ah Ujg * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620 -680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for support during large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Infinitely variable speed control system * Electronic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 16/20 mm Bending: 20/25 mm Upper & Lower Roll Diameter: 380 mm Side Roll Diameter: 300 mm Motor Power: 31.5 kW Bending Speed: 1.5 - 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 19200 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roller opening head Movable control panel Centrally driven rollers powered by motor Hydraulically movable rear roller and lower roller (up/down) Accurate bending with braked main motor Conical bending and pre-bending system Lower and upper rollers driven by planetary gearbox Rear roller ball system for easier sheet movement Compliance with EU safety directives High-strength forged steel rollers made of SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 pcs) User manual OPTIONAL EQUIPMENT Overhead crane for support during large diameter bending Hydraulic side supports for large diameter bending Ground and polished rollers Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 8/10 mm Njdpfxow Slcte Ah Uswg Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375/1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 400 mm, premer zgornjega valja: 400 mm, premer stranskega valja: 300 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 30 mm, STANDARD EQUIPMENT * The top, bottom, and side rolls move up and down linearly via hydraulic cylinders attached to the machine frame * Protected against overload * Top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Easy removal of bent parts thanks to the hydraulically opening head and automatic lifting shaft * Highly user-friendly operation via movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) Nodpfx Aow Sl T Seh Uowg * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed working system OPTIONAL EQUIPMENT * NC and CNC control for automation * Upper crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 20/25 mm Bending: 25/30 mm Top & Bottom Roll Diameter: 400 mm Side Roll Diameter: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 25 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulic pistons attached to the frame * Protected against overload * Upper and side rolls are driven by a hydromotor and planetary gearbox (3-roll motor-driven) * Roll positions can be easily read with three digital readouts * The hydraulically opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC automation control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special operations * Stepless speed adjustment system Njdpfx Ajw Smb Roh Uswg * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length : 2550 mm Pre-bending : 16/20 mm Bending : 20-25 mm Upper & Lower Roll : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 4850 mm Width : 1900 mm Height : 1950 mm Weight : 12800 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 280 mm, premer zgornjega valja: 280 mm, premer stranskega valja: 220 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 16 mm, STANDARD EQUIPMENT * The lower, upper, and side rolls move vertically via pistons hydraulically connected to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotor and planetary gearbox (3 rolls motor-driven) * Roll positions are easily read with three digital displays * The hydraulically opening head and automatic rising shaft allow the workpiece to be easily removed * Easy operation with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Central lubrication system Njdpfsw Smfcox Ah Uswg * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) support for large-diameter bending * Hydraulic side supports for large-diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special jobs * Stepless speed control system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 10/12 mm Bending: 12/16 mm Top & Bottom Roll Diameter: 280 mm Side Roll Diameter: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 10 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up and down movement for rear roll and lower roll Precision bending with braked main motor Conical bending and pre-bending system Lower and upper rolls driven by planetary gearbox Rear Roll Ball System for easy sheet movement Compliance with EU safety directives High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 units) Operating manual OPTIONAL EQUIPMENT Top crane (hoist) for large diameter bending support Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. bending diameter: 375 / 1250 mm Motor power: 7.5 + 1.5 kW Bending speed: 5 m/min Tank capacity: 25 l Length: 4500 mm Width: 1200 mm Njdpfx Aow Slcgeh Ujwg Height: 1370 mm Weight: 4800 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 320 mm, premer zgornjega valja: 320 mm, premer stranskega valja: 240 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 25 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT * The lower, upper, and side rolls move up and down linearly via pistons attached to the body hydraulically * Protected against overload * The upper and side rolls are driven by hydromotors with planetary gearboxes (all three rolls are motor-driven) Nwedpfx Ajxw Ebljh Usg * Easy roll position reading with three digital indicators * Easy removal of the bent workpiece thanks to the hydraulically opening head and automatically lifting shaft * User-friendly with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) to support large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16 / 20 mm Bending : 20 / 25 mm Upper & Lower Roll : 320 mm Side Roll : 240 mm Motor Power : 20 kW Bending Speed : 1.5 - 5 m/min Length : 4350 mm Width : 1800 mm Height : 1950 mm Weight : 10,500 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 460 mm, premer zgornjega valja: 460 mm, premer stranskega valja: 380 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 38,5 kW (52,35 KM), trajanje garancije: 12 meseci, STANDARD EQUIPMENT * The lower, bottom, and side rolls move linearly up and down via body-mounted hydraulic pistons Nwsdpjxd S T Ujfx Ah Ujg * Protected against overloading * Top and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * Roll positions are easily readable via three digital indicators * Rolled parts are easily removed due to hydraulically opening head and automatic lifting shaft * Very user-friendly operation via movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top support crane (elevator) for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic plate ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic synchronization system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Top & Bottom Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19800 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 9 mm, skupna masa: 5.400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up-down movement for rear and lower rolls Precision bending with braked main motor Conical and pre-bending system Lower and upper roll drive via planetary gearbox Rear roll ball system for easy sheet movement Compliance with EU safety directives High strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) User manual OPTIONAL EQUIPMENT Top crane (elevator) for support during large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual-speed operation Stepless speed adjustment Ejector system Hydraulic motor option Nwjdsw Slbvepfx Ah Ueg TECHNICAL SPECIFICATIONS Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 lt Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 380 mm, premer zgornjega valja: 380 mm, premer stranskega valja: 300 mm, dolžina valja: 4.100 mm, najv. debelina pločevine: 16 mm, STANDARD EQUIPMENT * Lower, upper, and side rolls move up and down linearly via body-mounted hydraulic cylinders * Protected against overload * Upper roll and side rolls are driven by hydromotor and planetary gearbox (all three rolls are motor-driven) * Roll positions are easily readable via three digital displays * The hydraulically opening head and the automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation via mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending device * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) Njdpfjw Smc Isx Ah Uewg * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC automation with control panel * Upper crane (hoist) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending: 10/12 mm Bending: 12/16 mm Upper & Lower Roll Diameter: 380 mm Side Roll Diameter: 300 mm Motor Power: 31.5 kW Bending Speed: 1.5 - 5 m/min Length: 6950 mm Width: 2250 mm Height: 2350 mm Weight: 22,000 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 400 mm, premer zgornjega valja: 400 mm, premer stranskega valja: 300 mm, delovna širina: 2.550 mm, najv. debelina pločevine: 40 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT * The upper, lower, and side rolls move up and down linearly by means of pistons hydraulically attached to the frame. * Protected against overload. * The upper roll and side rolls are driven by a hydromotor and planetary gearbox (all three rolls are motor-driven). * The positions of the rolls are easily readable via three digital displays. * Easy removal of the rolled part thanks to the hydraulically opening head and the automatically lifting shaft. * Very easy operation with a movable control panel. * Welded steel construction frame. * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Cone bending system. * Central lubrication system. * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460). * Electronic balancing system (Ø500-550-580-620-680). * Dual-speed operation system. OPTIONAL EQUIPMENT * NC and CNC control for automation. * Top crane (elevator) for supporting large diameter bending. * Hydraulic side supports for supporting large diameter bending. * Hydraulic sheet removal system. * Ground and polished rolls for special applications. * Stepless speed adjustment system. * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460). TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 25/30 mm Bending: 30/40 mm Upper & Lower Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 5350 mm Width: 2250 mm Nedpfxexw Ebxs Ah Uswg Height: 2350 mm Weight: 17,800 kg

Stanje: rabljeno, 3-točkovni držalec Ø 350 mm za stružnico SCULFORT Višina konjička: 550 mm Maksimalni premer: Ø 350 mm Razdalja med pritrditvenima V: 350 mm Širina: 1200 mm Nsdexxu Spjpfx Ah Uowg Debelina: 300 mm Skupna višina: 1300 mm Teža: pribl. 250 kg

Stanje: rabljeno, 3-točkovni podporni naslon za stružnico SCULFORT Višina središča: 550 mm Maks. premer: Ø 800 mm Nwedpfoxxu U Dox Ah Ujg Mere osnove: D 635 x Š 300 mm Razdalja med pritrdilnimi V utori: 480 mm Širina: 1600 mm Debelina: 350 mm Skupna višina: 1500 mm Teža: pribl. 250 kg

Stanje: novo, Leto izdelave: 2024, Premer cevi (maks.): 90 mm, Kot upogiba (maks.): 190 °, radij upogibanja (maks.): 250 mm, skupna dolžina: 5.800 mm, skupna širina: 1.550 mm, skupna višina: 1.750 mm, trajanje garancije: 12 meseci, maks. debelina aluminijaste pločevine: 4 mm, najv. debelina jeklene pločevine: 4 mm, MAXIMUM CAPACITY : Ø90x4mm MAXIMUM BENDING RADIUS : 250mm BENDING ANGLE : 190 degrees WORKING LENGTH : 4000mm MOTOR POWER : 27.5 kW LENGTH : 5800mm WIDTH : 1550mm HEIGHT : 1750mm BENDING SPEED : Adjustable Nwedpfxou Hiu Aj Ah Ujg STANDARD FEATURES Custom bend die set according to customer requirements Servo motor-driven feed axis Servo motor-driven rotation axis Automatic email delivery of detailed operation reports Servo bending axis (SFB 38-CNC/R1) Gearbox-driven bending system (51-65-76-90) Mobile CNC control unit with 21" color display 3D bending simulation Display of daily, weekly, and monthly total production quantity Calculation of total material length to be used Estimation of bending process duration X-Y-Z data conversion into Y-B-C Remote support access Portable foot pedal with emergency stop Manual – Automatic bending modes Mandrel and non-mandrel bending Safety guard with switch behind bending head Automatic mandrel lubrication system (SFB 38 CNC/R1) Hydraulic clamping Hydraulic mandrel Hydraulic stopper Hydraulic oil cooler Hydraulic linear slider system Hydraulic clamp Electrical panel safety lock and key-lockable panel Electrical panel cooler Overload protection

Stanje: novo, Leto izdelave: 2024, Premer cevi (maks.): 76 mm, Kot upogiba (maks.): 190 °, radij upogibanja (maks.): 250 mm, skupna dolžina: 5.800 mm, skupna širina: 1.550 mm, skupna višina: 1.750 mm, trajanje garancije: 12 meseci, maks. debelina aluminijaste pločevine: 4 mm, najv. debelina jeklene pločevine: 4 mm, MAXIMUM CAPACITY: Ø76x4mm MAXIMUM BENDING RADIUS: 250mm BENDING ANGLE: 190 degrees WORKING LENGTH: 4000mm MOTOR POWER: 23 kW LENGTH: 5800mm WIDTH: 1550mm HEIGHT: 1750mm BENDING SPEED: Variable STANDARD FEATURES Custom bending die set according to customer specifications Servo motor-driven feed axis Servo motor-driven rotation axis Automatic emailing of detailed work reports Nsdpfxeu Hix Ij Ah Uowg Servo bending axis (SFB 38-CNC/R1) Gear-driven bending system (51-65-76-90) Mobile 21” color screen CNC control unit 3D bending simulation Daily, weekly, and monthly total production quantity display Total material length calculation Estimated bending process time calculation X-Y-Z data conversion to Y-B-C Remote assistance capability Portable foot pedal with emergency stop Manual–Automatic bending modes Mandrel and non-mandrel bending Safety sheet with limit switch behind the bending head Automatic mandrel lubrication system (SFB 38 CNC/R1) Hydraulic clamping Hydraulic mandrel Hydraulic support Hydraulic oil cooler Hydraulic linear slider system Hydraulic collet Electric panel safety lock and key-operated cabinet lock Electric panel cooler Overload protection

Stanje: novo, Leto izdelave: 2024, Premer cevi (maks.): 38 mm, Kot upogiba (maks.): 190 °, radij upogibanja (maks.): 250 mm, skupna dolžina: 4.280 mm, skupna širina: 1.000 mm, skupna višina: 1.500 mm, trajanje garancije: 12 meseci, najv. debelina jeklene pločevine: 3 mm, MAXIMUM CAPACITY : Ø38x3mm MAXIMUM BENDING RADIUS : 250mm BENDING ANGLE : 190 degrees WORKING LENGTH : 3000mm MOTOR POWER : 7.5kW LENGTH : 4650mm WIDTH : 1000mm HEIGHT : 1500mm BENDING SPEED : Adjustable STANDARD FEATURES Custom-size bending die as per customer requirements Servo motor-driven feeding axis Servo motor-driven rotation axis Automatic detailed work report via email Servo bending axis (SFB 38-CNC/R1) Nwedpfx Ahou Hi T Ee Ujg Gearbox-driven bending system (51-65-76-90) Mobile CNC control unit with 21” color display 3D bending simulation Display of daily, weekly, and monthly total production quantities Total material length calculation Estimated bending process time calculation X-Y-Z to Y-B-C data conversion Remote assistance capability Portable foot pedal with emergency stop Manual and automatic bending modes Mandrel and non-mandrel bending options Safety plate with switch at the rear of the bending head Automatic mandrel lubrication system (SFB 38 CNC/R1) Hydraulic clamping Hydraulic mandrel Hydraulic support Hydraulic oil cooler Hydraulic linear slider system Hydraulic collet Electric cabinet safety lock and keyed main switch Electrical panel cooler Overload protection

Stanje: novo, Leto izdelave: 2024, Premer cevi (maks.): 65 mm, Kot upogiba (maks.): 190 °, radij upogibanja (maks.): 250 mm, skupna dolžina: 4.950 mm, skupna širina: 1.250 mm, skupna višina: 1.600 mm, trajanje garancije: 12 meseci, maks. debelina aluminijaste pločevine: 3 mm, najv. debelina jeklene pločevine: 3 mm, MAXIMUM CAPACITY : Ø65x3MM MAXIMUM BENDING RADIUS : 250MM BENDING ANGLE : 190 DEGREES WORKING LENGTH : 3000MM MOTOR POWER : 15.5KW LENGTH : 4950MM WIDTH : 1250MM HEIGHT : 1600MM BENDING SPEED : VARIABLE STANDARD FEATURES Custom bending die set in requested dimensions Servo-driven feed axis Servo-driven rotation axis Automatic e-mailing of detailed work reports Servo bending axis (SFB 38-CNC/R1) Nsdpfx Aju Hi Rqsh Ujwg Gearbox-driven bending system (51-65-76-90) Mobile CNC control unit with 21” color display 3D simulation bending Display of daily, weekly, and monthly total production amounts Calculation of total material length to be used Estimation of bending process time X-Y-Z to Y-B-C data conversion Remote support access Portable foot pedal with emergency stop Manual – Automatic Bending Mandrel – Non-mandrel Bending Safety sheet with switch at back of bending head Automatic mandrel lubrication system (SFB 38-CNC/R1) Hydraulic clamping Hydraulic mandrel Hydraulic support Hydraulic oil cooler Hydraulic linear slider system Hydraulic collet Electrical panel safety lock and lockable panel latch Electrical panel cooler Overload protection

Stanje: novo, Leto izdelave: 2025, MAXIMUM CAPACITY: Ø51x3 mm MAXIMUM BENDING RADIUS: 250 mm BENDING ANGLE: 190° WORKING LENGTH: 3000 mm MOTOR POWER: 13.5 kW BENDING SPEED: VARIABLE STANDARD FEATURES - One set of bending dies produced per customer’s requested dimensions - Servo Motorized Feed Axis - Servo Motorized Rotation Axis - Automatic Emailing of Detailed Work Reports - Servo Bending Axis (SFB 38-CNC/R1) - Gear Drive Bending System (51-65-76-90) - Mobile 21'' color CNC Control Unit - 3D Bending Simulation - Daily, Weekly, and Monthly Total Production Counter - Calculation of total material length to be used - Estimation of bending process time - X-Y-Z to Y-B-C data conversion - Remote assistance capability - Portable foot pedal with emergency stop - Manual – Automatic Bending Modes - Mandrel and Non-Mandrel Bending - Safety Sheet with Switch mounted behind bending head - Automatic Mandrel Lubrication System (SFB 38 CNC/R1) - Hydraulic Clamping - Hydraulic Mandrel - Hydraulic Support Stop Nwedpfxovyzwro Ah Usg - Hydraulic Oil Cooler - Hydraulic Linear Slider System - Hydraulic Collet - Emergency lock and key-lock for electric panel - Electrical Panel Cooler - Overload protection

Stanje: zelo dobro (rabljeno), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Scope of delivery includes: 01x Push-through safety device, used Material finish: hot-dip galvanized Total length: approx. 2,700 mm U-profile: 50 x 50 mm Bracket dimensions: 335 x 50 mm (H x W) 04x Hexagon screw: M10 x 35 mm 04x Flanged nut: M10 08x Washer: M10 Further information: System: SSI Schäfer suitable for model designation: PR350/400 designed for double rack rows suitable for clear span: approx. 2,700 mm General information about the item: This item is only available for collection. Any requested transport or shipping of this item is subject to additional costs, which can be inquired separately depending on delivery location and scope of delivery. Our services at a glance: (Prices on request) Assembly/Installation: please observe our general assembly terms and conditions Nwodpsh T Uwvjfx Ah Ujg Racking inspection: Shelf inspection according to DIN EN 15635 performed in accordance with the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)