Cometto Powerpack 186Kw nakup rabljenega (26)

Stanje: dober (rabljeno), številka stroja/vozila: 3681, Leto izdelave: 2023, skupna dolžina: 4.210 mm, skupna širina: 3.000 mm, obratovalna teža: 6.000 kg, Cometto POWERPACK 186 kW, dobavitelj: Uniktruck. Tjdpfx Aozqvk Reltea

Stanje: dober (rabljeno), številka stroja/vozila: 2251, Leto izdelave: 2021, skupna širina: 3.000 mm, obratovalna teža: 24.200 kg, Oprema: osvetlitev, Cometto MSPE-S od Uniktruck Tip koles – Krmilno kolo: Pnevmatsko Velikost koles – Krmilno kolo: 48 kos 215/75 R Todpfsyuhlvjx Altea

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Na voljo je celotna linija za rezanje in pakiranje proizvajalca Weber. 1) Rezalnik Weber, tip 904, sistem rezanja: krožna rezila, hitrost: 2000 vrt/min, obseg debeline rezine: 0,5 mm–100 mm. 2) Horizontalni stroj za termoformiranje in pakiranje CFS PowerPak 560, leto izdelave: 2011, predelava: 2013, širina folije: 560 mm, maks. podajanje: 650 mm, maks. globina vlečenja: 130 mm. 3) 2 x stroj za nalepke, ki se premika v prečni smeri, CFS TL 150, leto izdelave: 2011, maks. širina nalepke: 150 mm, maks. zmogljivost nalepk: 200/min. 4) Detektor kovin Loma EMC, leto izdelave: 2013. To je celotna linija za rezanje in pakiranje s pripadajočo opremo. Dokumentacija je na voljo. Ogled na lokaciji je možen. Todpfozli T Isx Altsa

Stanje: rabljeno, New: No Tjdpfx Aswuy Abeltea Part suitable for: trucks VAT/margin taxation: VAT deductible Type number: 2022876/2347769

Leto izdelave: 2018, stanje: rabljeno, Novo: Da Tsdsy Anbbspfx Altea Moč: 119 kW (162 KM)

Leto izdelave: 2011, obratovalne ure: 5.900 h, stanje: rabljeno, Intended use: Construction For more information, please contact Mohamad Fattah Ahmad. ICE 28 RFS + Hydraulic Power Pack 525 RF Year of manufacture: Vibrator: 2011 Hydraulic Power Pack: 2004 Tjdpfx Ash Tyydsltoa Very good condition Further information available upon request!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 23900101, Oprema: Na voljo je tipska ploščica, DEVICE FOR PACKAGING FOOD PRODUCTS SUCH AS MEAT, COLD CUTS, CHEESE, IN FOIL PACKAGING UNDER VACUUM OR IN INERT GAS. THE MACHINE IS EQUIPPED WITH FIVE FORMATS. A LARGE SET OF SPARE PARTS IS INCLUDED WITH THE MACHINE: BLADES, SEALS, VALVES, ETC. Tedpfxew Emh Es Altea

Stanje: rabljeno, Leto izdelave: 2015, Pomiki (X,Y,Z): 6175x1550x300 mm Število vreten navpične vrtalne glave: 20 Število vreten vodoravne vrtalne glave: 10 Število rezkalnih agregatov: 1 Hitrost: 24.000 o/min Zmogljivost črpalke: 300 kg/h Žagin agregat: ja (0) Krmiljenje: Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- - 5-osni CNC-obdelovalni center - Portalski stroj z dvostranskim Gantry pogonom - 1 rezkalno vreteno HOMAG DRIVE 5 C+, 5-osno, HSK-F63, 15 kW, max. 24.000 o/min - 1 večprocesna enota HOMAG (HOMAG Multi Processing Unit) VRTALNA GLAVA S 30 VRETENI: V20 / H10/ S360° "MPU" MultiProcessingUnit s C-osjo +/- 185° - 1 verižni menjalec za 30 orodij - Vključen SL laserski projektor - Vključene vakuumske priseske po obstoječem stanju - Rezervni deli in dodatna oprema kot vidno na slikah - zadnji HOMAG-ov servis 5-osni servis v letu 2024 - naslednji HOMAG-ov servis v 2025 - Cena vključuje strokovno razgradnjo in nakladanje na kamion stranke - Stroški za nakladalne okvirje / zavarovanje prevoza NISO vključeni, glej opombo na koncu opisa Todpfx Alezqggvetea Tehnični podatki ----- Maksimalna dolžina obdelovanca: Vsi agregati: posamezno 6.000 mm, nihajno min. 1550 mm, maks. 3.200 mm Premer orodja 25 mm: posamezno 6.175 mm, nihajno min. 1550 mm, maks. 3.200 mm Maksimalna širina obdelovanca: Vsi agregati, sprednja opora 1.100 mm Rezkanje, premer orodja 25 mm: sprednja opora 1.325 mm, zadnja 1.550 mm Debelina obdelovanca: Maks. 300 mm vključno s prijemali Rezkalno vreteno in vrtalna glava ----- 2 neodvisni Z-osi 1 rezkalno vreteno HOMAG DRIVE 5 C+, 5-osno, HSK-F63, 15 kW, max. 24.000 o/min, tekočinsko hlajeno vreteno, vmesnik za agregat DRIVE5C+ s 3-točkovnim navorom 1 večprocesna enota HOMAG VRTALNA GLAVA S 30 VRETENI: V20 / H10/ S360° "MPU" MultiProcessingUnit s C-osjo +/- 185° za vrtanje in žaganje pod poljubnim kotom 1 motor 2,3 kW, frekvenčno krmiljen, max. hitrost 7.500 o/min, programsko izbiranje za hitro obdelavo tudi pri majhnih premerih 20 navpičnih vreten HIGH-SPEED 10 vodoravnih vreten 1 utorno in razdelilno žago Vključen Z-osni modul Vključena odsesovalna glava Menjalnik orodij: ----- 1 Pick-Up mesto za žagin list 350 MM za DRIVE5(C)+ 1 verižni menjalec za 30 orodij, D=80 Za orodja in agregate z HSKF63 Verižni menjalec za 30 orodnih/agregatnih mest za uporabo v povezavi s stroji z 1 glavno vreteno 1 predhodni dvojni griper za hitro menjavo orodja Konzolna miza ----- 12 konzol Y=1500 MM za K-mizo 6 dvižnih tirnic HPL HUB 100 MM Dodatna oprema: ----- SPEED PACK: povečanje maksimalne pomične hitrosti X-osi na 80 m/min, vektorska hitrost = 110 m/min Pomoč pri pozicioniranju, konturni laser 1 vakuumska črpalka 300 m³/h Transportni trak za ostružke s podaljškom Vakuumski prijemalci SL laser Energijsko učinkovita 5-osna odsesovalna glava Varnostna oprema: ----- Laser, varnostni blažilci SAFESCAN za SPEED PACK CE oznaka HOMAG Speed Pack HOMAG paket kakovosti Zaprta vlečna veriga Krmiljenje ----- Powercontrol PC85 Homag powerTouch Ročni terminal HOMAG IPC Powerpack Programska oprema ----- HOMAG WoodWop 7.1 Diagnostični sistem Woodscout...

Leto izdelave: 2024, stanje: novo, The DA-69T control system offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The complete 3D machine setup covers multiple tool stations and provides instant feedback regarding the feasibility and handling of the product. Delem-69T Features: • 3D and 2D graphical touchscreen programming operation • 3D visualization in simulation and production • 17-inch high-resolution TFT color display • Complete Windows application suite • Compatible with Delem Modusys (module scalability and adaptability) • USB and peripheral interface Tsdsd Tpadjpfx Altsa • Open system architecture • Sensor bending and correction interface • Profile-T3D offline software • Major contribution to environmental protection, climate change, and the greenhouse effect; future generations will thank us! AD-S 30175 with Y1, Y2, X and R axes Bending force: 175 tons Bending length: 3050 mm Clearance between uprights: 2600 mm Rapid traverse speed: 120 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec Installation height, tool clearance, and ram depth of your press brake: 30 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 pc Backgauge fingers: 2 pc Press force and speed of the press brake. X-axis: 500 mm/sec X-axis travel: 650 mm Max. R axis speed: 350 mm/sec R axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 liters Length: 4250 mm Width: 1700 mm Height: 2750 mm Weight: approx. 11,500 kg Control: Delem-69T Options: Y1, Y2, X, R (4-axis) X=650mm X, R Control – CNC Cybelec ModEva 19T DBEND 3D CAD/CAM import & simulation software CNC-controlled hydraulic crowning Movable front support arms with T-slot, quick stop, and full-length guide Backgauge: Siemens DC servo motor with linear guide and ball screw system Protective cover CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) Wila hydraulic upper tool – NSCL-I-HC/UPB – PRO – Max load 180 t/m – Powerpack required Wila hydraulic lower tool – NSCR-I-HC-CNC/UPB – PRO – Max load 200 t/m – Powerpack required Powerpack for hydraulic clamping DAM (Durma angle measuring system) 2 YEARS WARRANTY The machine can be inspected and demonstrated at any time by appointment in our showroom in Staufenberg. Additional machines are ready for demonstration at our facility in Staufenberg. Further information is available upon request.

Leto izdelave: 2024, obratovalne ure: 32 h, stanje: novo, Manufacturer: DURMA Model: AD-S 30175 Year of manufacture: 2020* Bending length: 3050 mm Pressing force: 1750 kN Control system: DELEM DA-66T Operating hours: 32 h Backgauge controlled axes: X, R, Z1, Z2, +Delta X +/-125 mm, CNC controlled Distance between uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Throat depth: 410 mm X-axis travel: 650 mm X-axis travel speed: 500 mm/s Tjdpjdx Nluofx Altsa R-axis travel: 250 mm Approach speed: 160 mm/s Bending speed: 10 mm/s Return speed: 100 mm/s Dimensions (L/W/H): approx. 4250 x 1700 x 2750 mm Weight: approx. 11,500 kg Standard equipment: Y1, Y2, X, R – X=650 mm Control system: CNC Cybelec ModEva 19T – PC 1200 3D SW D-BEND 3D CAD/CAM import & simulation software CNC-controlled motorized crowning European style tool clamping system 60 mm die holder (suitable only for European style dies) Throat depth 410 mm 2 front support arms with T-slot and tilting stop, movable from the front Backgauge system: Siemens DC servo motorized with linear guide and ball screw Safety covers CE marking Extended equipment: Safety system in compliance with CE standard for EU: FIESSLER AKAS-3P motorized + FPSC (SAFETY PLC) Backgauge controlled axes: X, R, Z1, Z2, +Delta X +/-125 mm CNC controlled Control system: DELEM DA-66T Hydraulic upper tool clamping Wila NSCL-II-HC/UPB – PREMIUM – 250 t/m Hydraulic lower tool clamping Wila NSCR-II-HC-CNC/UPB – PREMIUM – 300 t/m Powerpack for hydraulic clamping AP3-AP4 bending aids, motorized height adjustment – max. load capacity 125 kg per unit Oil cooler This machine is manufactured to customer specifications. Further machines are available for demonstration at our Staufenberg facility. Further information is available upon request.

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, prva registracija: 04/2007, vzmetenje: zrak, barva: modra, Leto izdelave: 2007, Oprema: ABS, = Additional options and equipment = - Air suspension = Notes = Royen/Ipsam suction and blowing unit for dry substances Engine: Volvo Penta TWD 1031VE turbo diesel powerpack 2x SIHI vacuum pump 3000 m³/h Wittig Cyclone blower T5CDL12L71 3-axle BPW air suspension Belgian registration Tjdpjwwtmljfx Altja = Further information = Axle brand: BPW Suspension: Air suspension Rear axle 1: Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Tyre tread left: 50%; Tyre tread right: 50% Rear axle 3: Tyre tread left: 50%; Tyre tread right: 50% Technical condition: good Visual condition: good

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 3.000 h, 5-axis CNC portal machine; Console table with 6 movable consoles, each with 2 vacuum cups, side and longitudinal positioning pins, LED position display for vacuum cups Venture 316 Future Package 10 lift rails, connection for Power-Clamp, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece lengths: All units, single: 3300 mm; pendulum max.: 1740 mm Tool diameter 25 mm: single 3475 mm; pendulum max.: 1915 mm – Workpiece width: Front stop: 950 mm, all units / 1050 mm with tool diameter 25 mm Rear stop: up to 1400 mm / 1550 mm – Workpiece thickness: – Max. 250 mm including clamping fixtures – Up to 60 mm with standard clamps SAFETY AND PROTECTION FEATURES: EC-compliant; SAFETY FENCE ON RIGHT WITH DOOR Left and rear: wall installation! Equipment: 10 kW Drive5C spindle and 14-position tool changer (carousel) + 9-position linear changer, side-mounted Drilling head with 16 spindles (vertical 12 / horizontal 4 / none at 90°) AGGREGATE INTERFACE DRIVE5C+ TOOL MEASURING PROBE CHANGER SOFTWARE FOR POSITION MEASUREMENT AND ROTATION OF CNC COORDINATES TOOL TRANSFER STATION COOLANT TANK FOR MACHINING SPINDLE VACUUM PUMP 300/360 m3/h Powerclamp pneumatic package Todpfey E Npfex Altoa Control: POWERCONTROL PC85 with POWERTouch control system; IPC PowerPack, Operator pedestal for program start; camera system with tablet PC WOODWOP CAD/CAM INTERFACE STANDARD Documentation and control texts: German Delivery includes only the pictured tools and HSK holders!

Stanje: novo, največja dovoljena obremenitev: 98.290 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our entire range of vehicles that are immediately and soon available on our website. Extract from the equipment list. Full equipment details available on request. Gooseneck: * MAX810-neck-V-30-2.70-2{DSR 2 700/ASH 1300->1400} * Gooseneck hydraulically liftable/lowerable as well as removable. Length approx. 3,650 mm * Truck hydraulic connection with flow controller (20 l/min), * incl. gallows for suspension of supply lines, tractor unit (SZM) tank must hold at least 80 l, with MAX Trailer coupling pieces; otherwise, coupling pieces to be provided by the customer ex works. * For tractor units: 6 x 4 or 8 x 4 Loading Platform MAX810-6-A-11.00-17.5-1.50-2.75-PA-X * 6-axle extendable loading platform with pin-lug coupling at the front and approx. 500 mm x 8° chamfer at the rear. * Length: approx. 11,000 mm * Technically extendable by: approx. 7,700 mm * Axle spacing: approx. 1,500 mm * Hydraulic coupling bolt. Pendulum axle 2-axle front running gear, pendulum axle * All axles are hydromechanically forced steered. * MAX810-chassis-PA-X-F-2-17.5-1.50-2.75 pin-lug coupling front and rear. * Length: approx. 2,970 mm, chassis width: approx. 2,750 mm * BEKA-MAX central lubrication for a 2-axle running gear with standard grease NLGI-2 * Extendable widenings of approx. 230 mm per side for a 2-axle running gear. (± 27 kg) PENDULUM AXLE 6-AXLE LOADING PLATFORM, PENDULUM AXLE * All axles hydromechanically forced steered. * Hose burst valve on the axle compensation cylinder with automatic reset function. * Hydraulic cylinders with shut-off valves and pre-pin for securing in raised position. * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation. TYRES * 24 x manufacturer of our choice (M+S) 245/70 R17.5 * Load index 143/141L (146/146F) * TPMS: TPMS tyre pressure monitoring system in accordance with ECE R 141. Final coating of the axles * Painted with two coats of single-colour 2-component paint in DB7350 nova grey. * PAINTING Complete steel structure automatically blasted with shot blasting system after welding. * Second blast processing with corundum for optimal adhesion of the coating system. * HRM-metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection. * PAINTING Trailer carmine red (RAL 3002) Including the following accessories * Gallows with winch for spare wheel at the front of the gooseneck. * 3.5 inch king pin * Steel front wall approx. 400 mm high. * Plug-in ALU side boards and rear wall on the gooseneck, approx. 400 mm high, anodized version. * Control lever on the gooseneck protected by a foldable cover. * Lighting of the controls on the gooseneck with on/off switch. * One 7-pin socket left and right rear on the gooseneck for the warning sign. * Load gauge on the gooseneck for axle load determination on the running gear at front and rear * BEKA-MAX central lubrication for a gooseneck with standard grease NLGI-2. * Hydraulic connections from the gooseneck to the low bed with screw couplings. * Access possibility on the gooseneck. Tjdpfxjzbfuhs Altsa * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3000 rpm, emission level: EU Stage V, max. hydraulic pressure: 280 bar, max. flow: 21 l/min, installation on the gooseneck. * Hydraulic oil tank 100 L, frame hot-dip galvanized (± 480 kg) * Hydraulic connection lines between powerpack and plug-in plate on the gooseneck. * Radio remote contr

Leto izdelave: 2018, obratovalne ure: 35.000 h, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Opis w pełni zautomatyzowanej suszarni Generalny remont wykonany do połowy 2025 roku • Korpus suszarni stanowi spawana konstrukcja stalowa. Wewnętrzna podłoga wykonana jest z perforowanej blachy. Suszarnia posiada zewnętrzną obudowę (ściany i sufit) wykonaną z paneli typu sandwich. • Napęd suszarni realizowany jest za pomocą hydraulicznego agregatu zasilającego. • Suszarnia wyposażona jest w osiowe wentylatory „Ziehl Abegg” serii MAXvent. Łopatki wirnika są wykonane z lekkiego materiału odlewanego. Jest to jedno z najbardziej energooszczędnych rozwiązań na rynku. • Generator powietrza gorącego wyposażony w dwa wymienniki ciepła „Geo Coil” (w pełni sprawne, posiadają wygięte lamele). • System sterowania wyposażony w panel dotykowy do obsługi i wizualizacji procesów suszenia. Możliwy zdalny dostęp i kontrola przez komputer PC. Zintegrowany serwer WWW umożliwia wizualizację procesów suszenia przez interfejs Ethernet. • Tryb pracy sterowany temperaturą powietrza wylotowego. Prędkość obrotowa wentylatorów automatycznie dostosowywana przez przemienniki częstotliwości w celu utrzymania zadanej temperatury powietrza. W zestawie urządzenia do pomiaru ciśnienia oraz rozbudowany system sterowania. • Temperatura czynnika grzewczego suszarni: ok. 85°C (zasilanie) i ok. 65°C (powrót). Przepływ czynnika grzewczego: 176 m³/h. • Wentylatory powietrza suszącego wyposażone w przemienniki częstotliwości. • Czujniki wilgotności przy wylocie suszarni: TAK • Regulowana wysokość łóżka suszącego: TAK • Powiększony zasobnik paliwa: TAK Todpjxc Eitefx Altja Ogólne dane techniczne: • Materiał wsadowy: zrębki drzewne • Frakcja materiału: G100 • Maksymalna wilgotność wsadu: 45% • Wilgotność materiału po suszeniu: 7-10% • Wydajność znamionowa: ok. 1 600 kg/h • Gęstość (mokre): 300 kg/m³ • Powierzchnia robocza suszarni: ok. 97 m² • Warunki klimatyczne projektu: temperatura otoczenia 0°C, wilgotność względna 70%, ciśnienie powietrza 990 mbar • Poziom hałasu: 75 dB (w odległości 1 m od króćca wlotowego powietrza) Silniki wentylatorów suszarni – moc zainstalowana: 74 kW Hydrauliczny agregat napędowy suszarni: 15 kW

Stanje: novo, največja dovoljena obremenitev: 96.500 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 26.900 mm, skupna širina: 2.750 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Hydraulically lift/lowerable and detachable gooseneck, approx. 3,650 mm long * For tractor units: 6x4 or 8x4 * Truck hydraulic connection with flow control (20 l/min), incl. gantry for supply line suspension; the tractor unit tank must have at least 80 l capacity * With MAX Trailer coupling units; otherwise, coupling units to be provided ex works by the customer * Gantry with winch for spare wheel mounted at the front of the gooseneck * 3.5-inch king pin * Steel front wall approx. 400 mm high * Removable aluminium side and rear boards on the gooseneck, approx. 400 mm high, anodised finish * Control lever on the gooseneck protected by a folding cover * Operator area lighting at gooseneck, with on/off switch * One 7-pin socket each at the left and right rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for one gooseneck with standard NLGI-2 grease * Hydraulic connections from the gooseneck to the low-bed via screw couplings * Access steps on the gooseneck * Four warning panels extendable by approx. 1,000 mm (approx. 423 x 423 mm) each, with one LED position lamp and bracket for beacon * Mounting adapters for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 hp) at 3,000 rpm * Hydraulic connecting lines between powerpack and connector plate at the gooseneck * One LED worklight left and right on the rear plate of the gooseneck, individually switchable * Radio remote control for: - Operating the powerpack, start/stop of diesel engine. - Operating remote steering (in addition to cable remote), with 2 LED indicator lights on receiver for single-track control. - Lift/lower gooseneck. - Lift/lower suspension of running gear 2-axle front module: * Bolt-eye coupling front and rear. Length: approx. 2,970 mm. Module width: approx. 2,750 mm * BEKA-MAX central lubrication system for 2-axle module with standard NLGI-2 grease (not connected to steering rods) * One 7-pin socket each at the left and right rear of the front module for warning signs * Platform surface with sand coating as slip protection * Yellow reflective tape in accordance with EU regulations at the sides, on the extension, and at the rear of the trailer * One 7-pin socket for warning signs, left and right on the front module, in the axle area * Extendable outriggers approx. 230 mm per side for the 2-axle module * 1 pair M42 threaded blocks between the axles of the front module * 1 pair brackets for plug-in warning panels in the stake pockets of the exterior frame of the loading area Loading platform: * 6-axle, double telescopic loading platform with bolt-eye coupling at the front and rear chamfer approx. 500 mm x 8° Tjdpfxozahp Ss Altoa * Platform length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Base width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the platform with standard NLGI-2 grease * Platform surface with sand coating as slip protection * 11 pairs of recessed lashing rings in the external frame of the loading platform, foldable outwards (LC 10,000 daN) * Permanently welded intermediate table, approx. 500 mm long * 1 pa...

Stanje: dober (rabljeno), prva registracija: 04/2007, barva: modra, vzmetenje: zrak, Leto izdelave: 2007, Oprema: ABS, = Additional options and equipment = - Air suspension = Notes = Royen/Ipsam suction and blowing unit for dry substances Engine: Volvo Penta TWD 1031VE turbo diesel powerpack 2x SIHI vacuum pump 3000 m³/h Tsdozbupnopfx Altoa Wittig Cyclone blower T5CDL12L71 3-axle BPW air suspension Belgian registration = Further information = Axle brand: BPW Suspension: Air suspension Rear axle 1: Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Tyre tread left: 50%; Tyre tread right: 50% Rear axle 3: Tyre tread left: 50%; Tyre tread right: 50% Technical condition: good Visual condition: good

Stanje: zelo dobro (rabljeno), skupna širina: 3.000 mm, barva: zelen, Leto izdelave: 2023, Farbe: Grün Ausziehbar Gebremst Einheiten: 1x Goldhofer THP / ADD 2.0 6 / 12×08 S 1x Goldhofer PPU / ADD – 530 / 3000 Tedpsv I A Sysfx Altea 1x Goldhofer THP SL 6 SPLIT 1x Goldhofer THP SL 2 01x Goldhofer THP / ADD 2.0 6 – 12 x 08 S Baujahr / 2023 Fahrgestellnummer / WG0THPA68N0062326 Nur wenige Testkilometer! (ca. 7 km) Achslast / 36 t pro Achsreihe Lenkeinschlag / 55° auf jeder Federstufe BPW-Achsen Michelin-Bereifung / 215 / 75 R 17,5 EBS-Bremssystem Hydromechanische Lenkung Zentral-Schmieranlage 01x Goldhofer THP SL 2 Achsmodul Baujahr / 2023 Fahrgestellnummer / WG0THPS26N0042340 Nur wenige Testkilometer! Achslast / 45 t pro Achsreihe Lenkeinschlag / 55° BPW-Achsen Michelin-Bereifung Hydromechanische Lenkung Zentral-Schmieranlage 01x Goldhofer THP SL 6 Split Baujahr / 2023 Fahrgestellnummer / WG0THPS64N0042341 Nur wenige Testkilometer! Achslast / 45 t pro Achsreihe Lenkeinschlag / 55° BPW-Achsen Michelin-Bereifung / 215 / 75 R 17,5 EBS-Bremssystem Hydromechanische Lenkung Zentral-Schmieranlage 01x Goldhofer PowerPack Unit / ADD – 530 / 3000 Baujahr / 2023 Fahrgestellnummer / 62327-00 Deutz 6-Zylinder-Dieselmotor 390 kW / 530 PS Betriebsstunden / Nur 32 Stunden! Abgasnorm / EU Stufe 5 Funkfernbedienung = Weitere Informationen = Baujahr: 2023 Technischer Zustand: sehr gut Optischer Zustand: sehr gut Preis: auf Anfrage

Leto izdelave: 2013, stanje: dober (rabljeno),  Plazmijska rezalna in odsesovalna miza, dimenzije 2.500 x 6.000 mm.  Portalni most.  Voziček s servo pogoni (za pozicioniranje portalnega mostu v X-smeri). Tjdpfxstp Dhpo Altja  Strojna tirnica, dolžina 8 m.  Profili HEB450 za temelje strojne tirnice, 8 m.  Plazemska rezalna enota Hypertherm HPR 400XD, 1 kos.  Plazemska poševna rezalna enota, vključno z avtomatskim sistemom za nadzor višine.  Enota za odsesavanje dima Filtercube 4H za plazemsko rezalno enoto.  Plamenska rezalna gorilnika, 3 kosi.  Avtomatski sistem za nadzor višine IHT M4000 CAP za plamensko rezalno enoto, 3 kosi.  Nosilec gorilnika za plamenski gorilnik (motoriziran).  Nosilec gorilnika Single Drive za plamenski gorilnik, 2 kosa (avtomatsko pozicioniranje gorilnika).  Laserski kazalnik (za poravnavo in pozicioniranje gorilnika).  Računalniški nadzorni sistem (sestavljen iz industrijskega PC-ja in nadzorne plošče).  Nadzorna programska oprema 'VACAM Machine Edition' (vključno s programsko opremo VaCad in VaNest ter spletno podporo).  Avtomatska razporeditvena programska oprema Sigmanest "Powerpack" (vključno s 3-dnevnim usposabljanjem za največ 3 osebe pri podjetju Voortman Holland (brez potnih stroškov ter nastanitve in prehrane) ter 1-dnevno spletno podporo).  Gumb za nujni izklop z izklopno vrvico.  Letnik izdelave: 2013.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 17.058 h, nosilnost: 5.000 kg, dvižna višina: 6.500 mm, prosto dvigovanje: 2.070 mm, težišče tovora: 700 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 3.060 mm, model baterije: PzS, kapaciteta baterije: 930 Ah, preostala kapaciteta baterije: 50 odstotek, napetost baterije: 80 V, dolžina vilic: 1.400 mm, Tip prednje pnevmatike: polne pnevmatike (črne), tip zadnje pnevmatike: polne pnevmatike (črne), Oprema: centralizirani mazalni sistem, osvetlitev, - Udobna kabina širine 800 mm, zatemnjena stekla, brisalci spredaj in zadaj, drsno okno na desni strani, joystick z integriranim preklopnikom smeri vožnje na naslonu za roko, zračno vzmeten udoben sedež, notranja osvetlitev. - LED žarometi spredaj in zadaj, dodatni žarometi na strehi kabine in na dvižnem sistemu. Tjdpfey Sablsx Altsa - Dodatna oprema: sekundarna baterija (powerpacks), centralni mazalni sistem, brisalec strehe, hidravlično nastavljanje vilic, električno ogrevanje z ventilacijo kabine, rotacijska luč na strehi kabine, vzvratna kamera.

Stanje: rabljeno, Leto izdelave: 2007, Extendable body: Yes Todpfjyrtm Hex Altsa Please contact Theo Lelie for further information.

Stanje: rabljeno, Rabljen razpršilnik Enrico Molteni model ED30 iz nerjavečega jekla. Enota je poganjana z motorjem 22 kW. Ima inox posodo za mešanje s pritrditvenim delom. Vključuje hidravlični agregat za dvig in spust. Todpfx Asymaxfsltoa

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, This powerful hydraulic post driver from Maruzen is an excellent choice if you are looking for a robust machine for driving steel and wooden posts. The Maruzen KH193 is supplied as standard without a striker cap. Easy and Fast Operation - Delivers up to 1920 blows per minute - Operates using a hydraulic power source, such as a power pack or earthmoving machine - Suitable for use in wet conditions, even underwater - Minimal maintenance required; lubricate the head every 50 hours and full service every 500 hours. Hydraulic Powerhouse The KH193 post driver is the perfect choice for driving steel tubes, for example 60 x 40 mm or ø 60 mm, but is also suitable for wooden posts up to 110 mm in diameter. It weighs 20 kg and is more powerful than our petrol-driven rammers. This type of post driver offers considerable versatility: The Maruzen hydraulic powerpack is designed for mobile use and is known for its simple operation. This UH070 powerpack is matched to the AY01H horizontal earth drill, the OH01 hydraulic one-man auger, and the KH193 post driver from Maruzen. This type of powerpack is highly suitable for: - Fence installation - Foundation works - Guardrail/ boarding works - Solar park installations This hydraulic powerpack is powered by a Honda GX200 petrol engine and is delivered fully assembled, mounted on a steel frame with large wheels. Advantages: - Low fuel consumption; 1.6 liters per hour at full power - 20–25 liters per minute - Low noise level - Lightweight (40 kg) - Honda GX200 4-stroke engine (low emission) - Extremely easy to operate. Tjdpfortqydjx Altja EuroGate International offers affordable quality and service Maruzen is a reliable Japanese machine manufacturer offering a full range of hydraulic tools. This premium brand delivers outstanding quality and service. Maruzen has been manufacturing hydraulic machinery since 1954.

Stanje: rabljeno, Leto izdelave: 2009, Country of manufacture: NL Please contact Theo Lelie for further information. Tjdpfxoyrtm Tj Altoa

Stanje: rabljeno, Leto izdelave: 2014, Country of manufacture: NL Todsyrtnqjpfx Altsa Please contact Theo Lelie for further information.

Stanje: dober (rabljeno), Rabljena vodoravna centrifugalna peelerica Comi Cóndor tipa HX / GMP iz nerjavečega jekla 316L, ATEX izvedba. Enota ima perforiran koš s premerom 1150 mm. Največja nosilnost je 280 kg, največja zmogljivost torte 222 litrov. Nazivni notranji tlak +0,5/-0,5 bar, projektna temperatura 50 °C. Enota je opremljena z glavnim pogonom, hidravličnim pogonskim agregatom, montažnimi vzmetmi in (2) krmilnimi omarami. Material: nerjaveče jeklo 316/316L Tehnične značilnosti: Model: HX/GMP Največja nosilnost (gostota 1,25 kg/dm³): 280 kg Todpoynb Nujfx Altsa Stanje: v obstoječem stanju Proizvajalec: COMI-CONDOR