Chroma Batteriepack-Tester Preskusna Tabela nakup rabljenega (349)

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.400 mm, skupna dolžina: 3.500 mm, skupna višina: 800 mm, skupna masa: 7.500 kg, Measuring plate from CMM dismantling with leveling feet Kledpou Uiitefx Aqqet

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna širina: 700 mm, skupna dolžina: 1.400 mm, skupna višina: 500 mm, skupna masa: 2.000 kg, potrebna širina: 700 mm, zahteva za prostor dolžina: 1.400 mm, potrebna višina: 850 mm, Attention: only inspection plate from CMM dismantling with table frame Klsdpfx Aqovfn Ihjqst

Stanje: zelo dobro (rabljeno), Tester električnih inštalacij priznane nemške firme Gossen Metrawatt Model PROFITEST MXTRA je namenjen profesionalnim meritvam električnih inštalacij in preverjanju varnosti. Naprava, ki jo uporabljajo električarji, serviserji in za inšpekcijske preglede inštalacij. ⸻ TEHNIČNI PODATKI Proizvajalec: Gossen Metrawatt Model: PROFITEST MXTRA Napajanje: 230 V Merilna kategorija: CAT III 600V, CAT IV 300V Profesionalni tester električnih inštalacij ⸻ KOMPLET VSEBUJE tester PROFITEST MXTRA merilni kabel adapter transportna torba Natančen komplet je prikazan na fotografijah. ⸻ UPORABA meritve električnih inštalacij testi varnosti pregledi inštalacij električni servis Kjdpfx Ajywcr Deqqjlt ⸻ STANJE rabljeno vizualno v dobrem stanju

Stanje: zelo dobro (rabljeno), Tester varnosti električnih naprav priznane nemške znamke Gossen Metrawatt Model SECUTEST Pro, namenjen testiranju električnih naprav v skladu s standardom IEC 62353 Komplet vsebuje več naprav, merilne kable ter transportne torbe TEHNIČNI PODATKI Proizvajalec: Gossen Metrawatt Model: SECUTEST Pro Standard: IEC 62353 Napajanje: 230 V Profesionalni tester varnosti električnih naprav V KOMPLETU več testerjev merilni kabli adapterji transportne torbe natančno stanje je vidno na fotografijah UPORABA testiranje električnih naprav servis in pregledovanje varnostna kontrola medicina in industrija STANJE rabljeno vizualno v dobrem stanju tehnično stanje ni bilo v celoti preverjeno POMEMBNO prodaja kot komplet, kot je prikazano na fotografijah brez dodatne opreme razen prikazane POŠILJKA Klodjywcrwspfx Aqqjt

Stanje: rabljeno, Programmable AC Power Source / Voltage Regulator Laboratory Power Supply, Power Supply Unit, Programmable AC Power Source CHROMA Type 6415 Serial No.: 64150296 Year of manufacture: approx. 2000 Input Parameters – Input voltage: 190 ~ 250 V AC Input frequency: 47-63 Hz Input current: max. 12 A Output Parameters – Output voltage range: 0 to 150 VAC / 0 to 300 VAC Kedpfx Aedz Srajqqjlt Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1 V Distortion: 0.5% for frequencies 45 – 500 Hz, 1.0% for frequencies >500 – 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 – 1000 Hz Accuracy: 0.1 Resolution: 0.1 Hz Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor, and current crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232, and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature, and short-circuit protection - Temperature-controlled fan speed - Self-test on power-up - Delivered as shown, without additional accessories or connection cables Additional Connections: - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) Dimensions (H x W x D): 221.5 x 425 x 567 mm Net weight: 23 kg Good condition

Stanje: rabljeno, Programmable AC Power Source / Voltage Regulator Laboratory Power Supply, Power Source, Programmable AC Power Source CHROMA Model 6415 Item No.: 641500000 363 Year of Manufacture: approx. 2000 Input specifications: Input voltage: 190 ~ 250 V AC Input frequency: 47–63 Hz Input current: Max. 12 A Output specifications: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Maximum output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1 V Distortion: 0.5% for frequencies 45–500 Hz Ksdpfx Aqsdz Srboqelt 1.0% for frequencies >500 Hz – 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45–1000 Hz Accuracy: 0.1 Resolution: 0.1 Hz Measurements: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for true RMS voltage, true RMS current, active power, frequency, power factor and crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM storage for user-defined voltage and frequency combinations, retrievable at any time - Optional GPIB, RS-232, and analog programming interface - Over-voltage, under-voltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature-controlled fan speed - Self-test upon power-up Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (Printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Space required (H x W x D): 221.5 x 425 x 567 mm Net weight: 23 kg Good condition 2 units available, price per unit

Stanje: rabljeno, Chroma Tip: ATE 17011 Mere: Š x G x V 600 x 800 x 1760 mm Regenerativni tester celic (5V/100A x 12 kanalov) Napajanje: 400V/50 Hz 24 kVA Podatkovni zapisovalnik (64 kanalov) 8-portna senzorska kartica Modul 17212R-5-100 Maks. 5V / 100A Največje število kanalov: 12 (fiksno) Možnost vzporedne povezave: 200A, 300A, 400A, 600A, 1200A V Nastavljivo od 0 mV do 5000 mV * 1, ločljivost 1 mV A Kjdowwrn Ujpfx Aqqolt Nastavljivo od 0,01 A do 100,00 A, ločljivost 0,01 A Priključek: 400V/50Hz, 5 kablov 24 kVA Teža: 250 kg Stanje: rabljeno Obseg dobave: (glej sliko) (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih!) Za dodatna vprašanja smo vam na voljo po telefonu.

Stanje: novo, Equipment: 5-axis electronic control Swivelling control panel above the table Electronic adjustment of the scoring unit Kedpfx Ascrnm Noqqjlt Automatic rip fence with screw adjustment and linear ball bearing guide On/off switch integrated in the trimming carriage “Quick Lock” squaring frame Longitudinal fence with LCD displays “Full Support” Sliding carriage with curved contact surfaces – 10-year warranty! Telescopic arm with linear guide with ball bearing carriage Technical Data: Main saw blade diameter mm: 550 Scoring blade diameter mm: 120 Panel cutting capacity with extendable fence mm: 3200x3200 Saw blade tilting range degrees: 0 +46 Max. saw blade cutting height at 90° mm: 200 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scoring unit speed rpm: 8500 Dust extraction port diameter mm: 120 & 100 Main motor power Hz 50 / kW: 7.0 Scoring unit power Hz 50 / kW: 1.3 Cutting width with rip fence mm: 1500 Including the following OPTIONS: 570335 "Pro-Lock" system for quick clamping of the main saw blade with tool-free quick adjustment of the riving knife

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, številka stroja/vozila: 2299.001, For sale is a high-quality Modular Mass Production Tester (MPT) from NTS Optel – a professional testing and measurement system for automated quality control of optical components such as wafers, sensors, or micro-optics. This machine is engineered for precise high-volume inspection of optical parts, providing maximum measurement accuracy, reliability, and flexibility for industrial applications. Its modular design allows the tester to be perfectly adapted to specific production or development requirements. 🔍 Features & Equipment • Integrated laser module (940 nm, circularly polarized) for precise optical illumination • High-resolution camera with automatic calibration and large field of view • Robot-based wafer handling (EFEM) for automated loading and unloading • Analysis software for evaluation of efficiency, contrast, uniformity, and performance • CE-certified, includes safety interlocks and cleanroom-compatible design • User-friendly operation via touchscreen and integrated GUI system • Connectivity for LAN, power, and compressed air (6 bar) ⚙️ Technical Advantages • Automatic image capture and evaluation of test objects (DUTs) • Supports custom software modules (DLLs) • Low maintenance, robust construction, high operational reliability • Optional: Z-height control and wafer flip station 💡 Areas of Application Ideal for research, development, quality assurance, and series production in the following sectors: Ksdpfx Aqsy R Dzgeqolt • Optoelectronics • Sensor manufacturing • Semiconductor technology • Microsystems technology

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Carriage length: 3200 mm Cutting width at rip fence: 1350 mm Cutting width at cross-cut fence: 3200 mm Cutting depth: 125 mm Scoring unit: yes Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Cross-cut fence display: scale Saw blade diameter: 400 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Extraction connection: 80 mm and 120 mm Machine length: 3400 mm Kedpfx Ajgfm Efoqqslt Machine width: 2000 mm Weight: 900 kg

Leto izdelave: 2011, obratovalne ure: 30.000 h, stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, proizvajalec krmilnikov: FAGOR, model krmilnika: 8070, število osi: 3, This 3-axis DANOBAT CHROMA 30 was manufactured in 2011. It features a punching force of 30 t, a maximum sheet thickness of 6 mm, and a working area of 3000 x 1500 mm. The machine operates at a punching speed of 1000 strokes/min and includes a tooling system valued at €20,000. If you are looking for a high-quality punching machine, consider the DANOBAT CHROMA 30 punch grinder we have for sale. Contact us for further details. • Punching force: 30 t (300 kN) • Maximum sheet thickness: 6 mm (currently processing up to 4 mm galvanized steel) • Stroke: 35 mm • Punching speed: 1000 strokes/min • X-axis speed: 120 m/min • Y-axis speed: 80 m/min • Working pressure: 6 bar • Working area: 3000 x 1500 mm • Clamping system: 3 clamps with automatic positioning/change • Number of stations: 27 (including 4 auto-index stations) • Tool system: GOITI • Drive: Servo-electric (electric ram) • CNC: Fagor 8070 • Automatic clamp adjustment • Air-conditioned control cabinet • Apparent power: 7 kVA • Voltage: 400 V • Frequency: 50/60 Hz • Operating hours: 30,000 • Maintenance: Annual inspections by the manufacturer • Condition: In operation • Demonstration: Can be seen under power Kjdpsy Rzbkefx Aqqjlt Additional equipment • Includes tool set (valued at €20,000)

Stanje: zelo dobro (rabljeno), Weiss Temperature Shock Test Chamber We offer you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, air-cooled (The compressor has been replaced!) Specification: - Temperature range, hot chamber: +60°C to +220°C - Temperature range, cold chamber: -10°C to -80°C - Transition hot/cold chamber: 10 s Kedpfx Aqsk E Htyeqjlt - Temperature stability: ±1 K Dimensions and further data: - External dimensions: height 1990 mm - Width (without/with swing arm): approx. 1820 mm / approx. 1915 mm - Depth (without/with test chamber door): approx. 900 mm / approx. 1155 mm - Lifting basket (test chamber) dimensions: height 450 mm, width 500 mm, depth 600 mm - Volume: 130 liters - Max. load for test chamber: 20 kg - Max. load for test chamber floor: 20 kg - Cooling water pressure: min. 2 to max. 6 bar - Max. pre-fuse: 35 A (32 A CEE plug) - Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) - Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW - Rated current: 26.0 A - Refrigerant: R 404A / R23 - Weight: approx. 950 kg - Type: TS 130 - Condition: used - Scope of delivery: (see picture) (Specifications and technical details subject to change and errors reserved!) If you have any further questions, we will be happy to answer them by phone.

Stanje: rabljeno, Wheel diameter – max. 0-200 mm Module – max. 25 Module – min. 0.5 with accessories and under-table Year of manufacture approx. 1995 Klsdpfx Aqstuxa Usqst

Stanje: zelo dobro (rabljeno), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit module, enabling fast, repeatable, and fully automatic hardness measurements without subjective operator influence. This equipment is intended for measurement laboratories, quality control departments, manufacturing plants, the automotive and aerospace industries, as well as tool rooms. — Key information: • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • AUTOVICK automatic system • Integrated Mitutoyo Vision Unit module • Automatic indentation recognition and HV calculation Kljdpfx Aeyc H I Seqqot • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction — Technical condition: • Device is operational and complete • Very good visual condition • Regularly used in industrial environment • Last technical inspection: 2020 • Ready for operation upon connection — Included in the set: • Mitutoyo HV-100 hardness tester • Vision Unit (measurement camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport crates with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Safety tester with scanner for high voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in excellent condition. The SEFELEC 506-S test device for electrical safety testing, a new generation EATON model, is based on ARM Dual Core technology components and controlled by a DSP. This technology provides the operator with optimal stability and repeatability of measurements. The high accuracy and test speed are tailored to the quality assurance requirements in production and incoming goods inspection. The sequencing function simplifies operation of the SEFELEC 506-S test station when integrated into a test setup or test bench. The 7” touchscreen of the new SEFELEC model series impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of measurement sequence - Sequence mode for combining multiple consecutive tests Withstand voltage at 5 kVAC 500 VA and 6 kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2 TΩ range PE measurement at 32 A – 8 VAC, measurement 0 ... 1 Ω Optional: Test current 50 A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming as well as displaying active tests and results Integrated ARM Dual Core Control & Nand 3D technology for optimum precision, stability, and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-034: Particular requirements for measuring insulation resistance and for test equipment for dielectric strength) Shipping is possible upon prior arrangement. #8312-2 Klodpfxsxqxw Te Aqqot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Safety tester for high voltage test bench - EATON Sefelec 506-S The device was acquired in 2023 and is in TOP condition. The SEFELEC 506-S electrical safety tester, a new generation EATON model, is based on ARM dual-core component technology and controlled by DSP. This technology offers the operator optimal stability and repeatability of measurements. Kedpoxqxt Iefx Aqqslt High measurement accuracy and speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequencer function simplifies station operation when integrating the SEFELEC 506-S into a test rig or test bench. The new SEFELEC series’ 7” touchscreen impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of measurement sequence - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuation (ΔI) Burn mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE (protective earth) test at 32A–8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp-up, hold, ramp-down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming and displaying ongoing tests and results Integrated ARM dual-core control & NAND 3D technology for optimum accuracy, stability, and repeatability Integrated DSP allows for higher test speeds Large internal memory for storage of configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical measurement, control and laboratory equipment – Part 2-034: Particular requirements for measurement equipment for insulation resistance and withstand voltage) Shipping available by arrangement. #8312-1

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Der ibg Ring Tester Large wurde für die automatisierte Rissprüfung von Wälzlagerringen im Innen- und Außenbereich mit Durchmessern von 45 – 100 mm konzipiert. Das System führt zunächst eine Gefügeanalyse durch, gefolgt von einer Zeilenscan-Prüfung der Laufbahnen sowie des Innen- und Außendurchmessers, gesteuert durch den eddyvisor C. Nach der Prüfung werden die Bauteile automatisch klassifiziert und in i.O. (OK) und n.i.O. (NOK) sortiert. Die Prüfeinheit ist auf einem robusten Metallrahmen montiert, der für industrielle Produktionsumgebungen geeignet ist und über integrierte Stellflächen für die Schaltschränke zur Aufnahme der Messgeräte und der SPS (inkl. Siemens SPS) verfügt. Kedpfoy H Dkajx Aqqjlt Saubere, aufrecht stehende Bauteile werden vereinzelt, einem Transport-Rad zugeführt und mittels Riemen auf Rotationsgeschwindigkeit gebracht. In der Prüfstelle sorgen verstellbare Rollen für die seitliche Fixierung, während die Sonden die Oberflächen auf Defekte prüfen; anschließend erfolgt die automatische Sortierung in i.O. und n.i.O. Vor der Prüfung müssen die Ringe frei von Partikeln und tropfender Flüssigkeit sein. Das System folgt strikt dem „good-part-only“-Prinzip von ibg, während n.i.O.-Masterringe ausschließlich zur Überprüfung der Detektionsleistung in Versuchsdurchläufen eingesetzt werden. Die Einlaufhöhe beträgt 1550 mm, die Auslaufhöhe 1220 mm. Weitere Details finden Sie auf unserer Website.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Der ibg Ring Tester Small ist für die automatische Rissprüfung an Innen- und Außenringen von Wälzlagern mit dem eddyvisor C konzipiert. Sowohl die Laufbahnen als auch die Außen- und Innendurchmesser können jeweils mittels einer Linienabtastung mit ein oder zwei Sonden geprüft werden. Nach der Prüfung erfolgt die Aussortierung der Teile in OK und NOK. Das Prüfsystem ist auf einem robusten Metallgestell montiert, ideal für den Einsatz in der Produktion, und bietet Platz für die Stahlschränke mit den Prüfgeräten und der Steuerung (einschließlich Siemens SPS). Das Inspektionssystem verwendet eine oder zwei Sonden zur Linienabtastung der Laufbahnen sowie der Innen- und Außendurchmesser. Gereinigte, aufrechtstehende Teile werden vereinzelt und in ein Transportrad eingegeben, in dem sie mittels Riemenantrieb beschleunigt und rotiert werden. An der Prüfstelle sorgen verstellbare Rollen für die seitliche Fixierung, während die Sonden die Oberflächen auf Fehlstellen abtasten. Im Anschluss werden die Teile in OK und NOK sortiert. Die Ringe müssen partikelfrei und ohne tropfende Flüssigkeit sein. Die Systemeinrichtung erfolgt nach dem Good-Part-Only-Prinzip von ibg. NOK-Musterteile werden ausschließlich zur Überprüfung der Fehlererkennung im Versuch eingesetzt. Einlaufhöhe 1.350 mm, Auslaufhöhe 1.150 mm. Kledpfx Ajy H Dghoqqot Weitere Informationen finden Sie auf unserer Webseite.

Stanje: rabljeno, Leto izdelave: 1971, Brinell 250 kg Rockwell 150 kg Throat depth 125 mm Test height 200 mm Machine weight approx. 0.07 t Space requirement approx. 650 x 530 x 1550 mm Ksdpfxey Sih Uj Aqqelt Testing according to Rockwell, Vickers, and Brinell methods. This is a used device, therefore we sell under exclusion of any warranty.

Stanje: dober (rabljeno), Proizvajalec: WMW WPM Stroji za preizkušanje materialov Leipzig Leto izdelave: Tip: Način preizkusa: Premer mize: 200 mm Premer opore: 100 mm Izsek: mm Višina preizkusa: 300 mm Premer vretena: 50 mm Preizkusna sila: 15,5 do 250 kg Dodatna oprema: Teža: 130 kg Namestitvena površina: 500 x 200 mm Klodpjy Hka Ujfx Aqqst Dimenzije: 500 x 300 x 730 mm Stanje: dobro

Stanje: zelo dobro (rabljeno), RS Simulatoren Climate Chamber KSS 600/75-10K Device Data Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Type: KSS 600/75-10K Version: Climate test chamber / environmental simulation chamber Cooling: water-cooled Description Used climate test chamber from RS-Simulatoren. Suitable for temperature testing, climate tests, material, and ageing tests. Designed for use in industrial testing and measurement applications. Technical Data Temperature range: -75 °C to +180 °C Temperature change rate: heating/cooling approx. 10 K/min Test chamber volume: approx. 600 litres Dimensions Internal (W x D x H): 840 x 840 x 840 mm External (W x D x H): 1200 x 1600 x 1995 mm Electrical Data 400 V / 3~ / N / PE Current consumption: approx. 55 A Refrigeration System Refrigerants: R404A / R23 R404A: 6.0 kg R23: 3.0 kg Weight Approx. 1400 kg Equipment RS-Simulatoren control / operator panel Programmable operation Observation window Temperature monitoring in the test chamber Operating hours counter Side entry port Rugged industrial construction Scope of Delivery RS-Simulatoren climate chamber KSS 600/75-10K Scope of delivery as shown Optional pre-delivery service Functional test Refrigerant service Leakage test Test run with protocol Condition Kodsy H Ib Ajpfx Aqqjlt Used. Condition as shown in the pictures. Note Used equipment, sale without warranty. Inspection by appointment possible. Loading and transport can be organized upon request. Subject to prior sale and technical changes. If you have any questions, feel free to contact us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Uvod SUN Št. 4 fleksotiskarske barve od spodaj High Board Line (št. 2 tiskalnih enot leto 2006 – št. 2 tiskalnih enot leto 2016) Vakuumski prenos med skupinami s sistemom traku in panelov Kodpfxjy D Huve Aqqjlt HBL prenos z vakuumskim transportom, leto 2025 Maksimalna velikost 1200x1600 mm Na voljo maj 2027

Leto izdelave: 2021, obratovalne ure: 4.748 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 4979.69 h For sale is a used temperature test chamber from Weiss Technik. The test chamber is designed for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Designation breakdown: T = Temperature Test Chamber 1000 = approx. 1000 liter volume 70 = Low temperature range (-70°C) e = Energy-optimized version 5 = Temperature change rate (series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70°C to +180°C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A / R23 Kodpfx Aqoy El Ttoqelt Weight: approx. 1200 kg For your peace of mind as a buyer, please note the following: The following points are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photos) (Specifications may be subject to change or error!) Please feel free to contact us by phone for any further questions.

Leto izdelave: 2021, obratovalne ure: 4.748 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 litres, year of manufacture 2021, operating hours 4748.2 h For sale is a used temperature test chamber manufactured by Weiss Technik. The test chamber is used to examine components and materials under various temperature conditions (e.g., cold, heat, ageing). Designation breakdown: T = Temperature Test Chamber 1000 = approx. 1000-litre volume 70 = Low-temperature range (-70°C) e = Energy-optimised design 5 = Temperature change rate (series) Equipment: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical Data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 litres Temperature range: approx. -70°C to +180°C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your peace of mind as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Kodpfxoy Dd Nqj Aqqelt Scope of delivery: (see picture) (Subject to alteration and errors in technical data. Further details available on request!) For further questions, we are happy to assist you by phone.

Leto izdelave: 2021, obratovalne ure: 5.128 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 litres, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber manufactured by Weiss Technik. The test chamber is used to test components and materials under various temperature conditions (e.g. cold, heat, ageing). Meaning of model designation: T = Temperature test chamber 1000 = approx. 1000 litre volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Equipment: - Stainless steel inner chamber - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical Data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 litres Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Nominal current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg Important information for buyer safety! The following checks and works are carried out on all chambers we offer before delivery: 1. Functional testing and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) We are happy to answer any further questions by phone. Klsdpfxoy Dclwo Aqqet