Bitherma Ng 100 nakup rabljenega (30.931)

Stanje: dober (rabljeno), Pressure gauge, pressure measuring device with Bourdon tube, pressure and temperature measurement technology - Connection: G 1/2 " - Display: up to 10 bar - Quantity: 6 units available Ijdpfxsb A R T Ao Abxsth - Price: per package - Weight: 0.5 kg

Stanje: novo, Leto izdelave: 2023, Nominal press force: 1,000 kN Ram stroke, adjustable in increments: 16...140 mm Ram adjustment: 90 mm Throat depth: 295 mm Strokes per minute (idle): 70 / min Die installation height at maximum stroke below and adjustment above: 420 mm* Table clamping area (W x D): 1,050 x 660 mm Ram clamping area (W x D): 640 x 460 mm Ram bore diameter: 65 H7 mm Main motor power: 7.5 kW Machine height approx.: 3,085 mm Itodpjdulidjfx Abxeh Machine weight: 8,500 kg Equipped with hydraulic overload protection, fully automatic ram adjustment, semi-automatic stroke adjustment, and the latest accident prevention regulations (UVV).

Stanje: zelo dobro (rabljeno), Rotary plate Diameter: 100 mm Itjdpfx Abeln Ukcoxoh Length: 380 mm Width: 160 mm Thickness: 32 mm Weight: 4 kg Other sizes available on request.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x pallet rack beam, used Colour: orange Profile: IPE 100 x 55 mm Connector: 3 holes Clear span: approx. 2,700 mm Each connector with 3 holes Hole spacing: approx. 100 mm Hole diameter: approx. 11 mm Itjdeibzftopfx Abxjh 01x set of fastening material consisting of: 06x M10 bolts 06x nuts 06x washers

Stanje: dober (rabljeno), Included in the scope of delivery: 01x pallet rack beam, used Material color: orange IPE profile: 100 x 55 mm End connector: 5 holes Clear span: approx. 2,700 mm Per end connector: 5 holes Hole spacing: approx. 50 mm Hole diameter: approx. 11 mm 01x set of fastening material consisting of: Isdjibzgxepfx Abxeth 10x M10 bolts 10x nuts 10x washers

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 100-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The unit is also equipped with a fixed-mounted water separator, which removes moisture from the compressed air and prevents the blasting media from clumping due to excessive humidity. For safe operation, our safety cut-off system is included. This system starts and stops the blasting process by actuating the hand lever mounted on the blasting hose. The pressure blasting unit is delivered fully assembled, operational, and space-saving in a mesh box. Only the compressed air supply needs to be connected and the unit filled with blasting media. Transport can be carried out conveniently using a forklift or pallet truck. For protective clothing, spare parts, etc., a lockable aluminum storage box is installed. Scope of delivery includes: - SAPI pressure blasting unit "Mammut 100 L" - 1" pressure regulator, permanently installed Iedpfxowc Ri Io Abxsth - 1" water separator, permanently installed - SAPI safety cut-off system - Blasting media sieve - Cover - 10 m blasting hose ø 25x7 mm, fully assembled - Silicon carbide venturi long nozzle, available in 6 mm, 8 mm, or 10 mm diameter - RED 2 sandblasting helmet - Sandblasting overall (nylon/cotton) - 1 pair of leather blasting gloves - 10 m breathing air hose, fully assembled - SAF breathing air / activated carbon filter - Wear parts kit consisting of: - 100 tear-off visors for RED 2 - 10 inner lenses for RED 2 - 1 blasting hose coupling 25x7 mm nylon - 2 rubber seals for blasting hose coupling - 1 nozzle holder 25x7 mm - Mesh box with blasting hose holder - Lockable aluminum box Technical specifications pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-certified with certificate - Rigid 1" piping (internal and external) - Rubber-coated metal cone with rubber seal - Large handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 100 l - Total height: 1,130 mm - Vessel diameter: 490 mm - Overall diameter: 900 mm - Weight: approx. 75 kg Mesh box dimensions: - Length: 1,460 mm - Width: 840 mm - Height: 1,400 mm - Total weight incl. all accessories: 260 kg

Leto izdelave: 2024, stanje: kot nova (razstavni stroj), -Usable internal dimensions: D=970mm H=540mm (other sizes available on request) Isdjf A Nq Ujpfx Abxoth -Touch screen -Spray pressure: 3 bar -Basket load capacity: 200kg -Tank volume: 210L -Standard equipment: • Oil skimmer • Frame, lid and housing made of stainless steel • Electrically operated, timer-controlled steam extraction • Reinforced stainless steel basket • Stainless steel electric pump • Stainless steel filter on the pump suction side • Stainless steel heating elements • Mechanical basket rotation with geared motor • Electrical system IP 65, PLC control (DGT V4) • Automatic water inlet • Safety limit switch monitors lid opening • Stainless steel spray nozzles • Weekly timer for heating and oil separator • Hour meter

Stanje: dober (rabljeno), Pressure gauge, Bourdon tube pressure measuring device, pressure and temperature measurement technology - Connection: G 1/2" Iedpfx Asb A R T Dobxeth - Display: up to 4 bar - Quantity: 6 units available - Price: per package - Weight: 0.6 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, dolžina obdelovanca (maks.): 750 mm, širina obdelovanca (maks.): 530 mm, višina obdelovanca (maks.): 6 mm, Stroj je že demontiralo in skladiščilo strokovno podjetje. TEHNIČNE PODROBNOSTI Maks. širina izseka: 530 mm Maks. dolžina izseka: 750 mm Maks. debelina materiala: 6 mm OPREMA PC delovna postaja DZDV PC s 32” zaslonom na dotik, 9970460-20, vključno s konzolo Itsdpszb Iihjfx Abxeh Toplotni tiskalnik / sistem za dodelavo SLEEKING System HAK 100/Brother Opomba: Oprema brez garancije. Velja: „Predmet kupljen kot viden“. Kupec se mora na kraju samem prepričati o popolnosti predmeta.

Stanje: rabljeno, Leto izdelave: 2008, Tehnične podrobnosti: Obratovalni premer: 190 mm Obratovalna dolžina: 503 mm Krmiljenje: Fanuc 31i - TA Pomiki x/z revolver 1: 135 / 503 mm Pomiki x/z revolver 2: 135 / 503 mm c-os: Vreteno 1 / 2 Hitrost vretena 1: 6000 1/min Itedpezd T I Hsfx Abxoh Moč vretena 1: 11/7,5 kW Največji premer palice vretena 1: 42 mm Hitrost vretena 2: 6000 1/min Moč vretena 2: 11/7,5 kW Revolver št. 1 postaje / pogonjenih: 12/12 Hitrost orodja revolver 1: 6000 1/min Moč pogona orodja revolver 1: 7,1 / 2,2 kW Revolver št. 2 postaje / pogonjenih: 12/12 Hitrost orodja revolver 2: 6000 1/min Moč pogona orodja revolver 2: 7,1 / 2,2 kW Skupna priključna moč: 53 kVA Teža stroja pribl.: 5700 kg Potrebni prostor pribl.: 2,3 x 1,6 x 1,94 m Oprema: Izmetnik ostružkov desno Robotski vmesnik Visoko precizen CNC stružni center s pogonom za pogonjena orodja na dveh revolverjih. Robotsko nalaganje za gredi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 50 letvica, dolžina visokotlačne cevi: 1.500 mm, lastna masa: 100 kg, vhodna napetost: 230 V, kapaciteta rezervoarja za vodo: 100 l, trajanje garancije: 12 meseci, V prodaji imamo visokotlačni čistilec v kombinaciji s sesalcem AP 100/50M. Naprava omogoča odstranjevanje vode, ki ostane na površini po čiščenju z visokim tlakom, ter tako omogoča uporabo na talnih površinah brez odvodnjavanja. Priporočljiva je za čiščenje kopalnic in umivalnic, ki morajo biti takoj dostopne po zaključku čiščenja. AP 100/50M je odličen za uporabo v hotelih in wellness centrih, javnih objektih (železniške postaje, letališča), industrijskih kopalnicah, restavracijskih kuhinjah, športnih objektih in številnih drugih lokacijah. Gre za nujno napravo za čistilna podjetja, ki upravljajo s tovrstnimi objekti. Stanje naprave – zelo dobro Leto izdelave: 2014 Za kupljeno napravo nudimo 12-mesečno GARANCIJO. Tehnične specifikacije: - Rezervoar za čisto vodo: 100 l - Rezervoar za odpadno vodo: 70 l - Največji tlak: 50 bar - Črpalna zmogljivost: 5 l/min Itjdpfx Aswz Nmpebxoh - Moč turbine: 1800 W - Moč črpalke: 370 W - Napetost: 230 V - Teža: 100 kg

Stanje: novo, SCHUNK DPG 100 paralelni prijemalec SN: 370253 + dodatki DPG 100/1 in DPG 100/1 S, neuporabljen v odprti originalni embalaži, 100 % delujoč, obseg dobave po fotografijah Isdszd I Eyopfx Abxjth

Stanje: rabljeno, največja dovoljena obremenitev: 649 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, prva registracija: 03/2026, dolžina tovornega prostora: 2.100 mm, širina tovornega prostora: 1.100 mm, višina nakladalnega prostora: 650 mm, skupna širina: 1.555 mm, skupna višina: 900 mm, A63. GW26M0140819 Nizkonakladni prikolica, proizvajalec Unsinn, tip UT 2111-7-13, Skupna masa: 750 kg, odprt keson, 100 km/h Itodpfxoyqdnfs Abxeh Pridržujemo si pravico do sprememb in vmesne prodaje.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 2.200 kg, največja dovoljena obremenitev: 8.300 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 400 mm, skupna dolžina: 6.280 mm, skupna širina: 2.550 mm, skupna višina: 2.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Tailor-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are customized individually per customer request. Chassis: Central axle trailer, low-bed Fine grain steel welded construction Gear support leg at front Telescopic rear support 2 wheel chocks with holders Steel mudguards covering both wheels Side underrun protection in aluminium Drawbar assembly for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable by spindle, max. adjustment range 250 mm Axles & Suspension BPW drum brake axles “Axle/chassis laser alignment” reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Wheels and Tyres 235 / 75 R 17.5” Manufacturer’s choice Factory silver steel rims Brake System Dual-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle 24V ABS and ALB system, ABS connector at the front, with connecting cable Note: The trailer may only be towed by tractor units that ensure the ABS system is operational! Electrics 24V, multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red lane indicator lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable Platform TTS Low-positioned steel trough, platform floor with steel/chequer plate covering, steel walls solidly welded to the floor Platform length: 4,500 mm Front and side “Load-Lock” profiles for strap attachment (Front: 8 points; each side: 12 points) Note: Minor floor undulation due to welding distortion is possible! 2 pairs of lashing eyes: 1 pair at the front corners of the steel trough, 1 pair at the rear in the floor, each rated to 5 tons Loading ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable With carry handle on the ramps Wooden covering (ramp tip with chequer plate steel) Gas pressure springs for single-person operation Operating notes The specified gross weight is technically possible; depending on the load, the permissible axle/support/kingpin loads may limit the actual gross weight. (Poor handling and tracking can result from incorrect load distribution) Country of registration / Number plates Country of registration: Germany Includes Dekra inspection and report (according to §13 EG-FGV) 24/7 service hotline Prepared for single-line number plate holder Conspicuity marking with reflective tape to ECE R 048, white on the sides, red at the rear Itsdpsi Ri Ebjfx Abxsh Paintwork Frame painted or galvanized according to customer preference Loading ramps hot-dip galvanized Tailor-made transport solution Configure your Fliegl vehicle to meet your requirements. The example vehicle shown serves as a sample. Production and equipment are tailored individually to customer requirements.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT21001014667, lastna masa: 2.200 kg, največja dovoljena obremenitev: 8.300 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 400 mm, skupna dolžina: 6.280 mm, skupna širina: 2.550 mm, skupna višina: 2.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: srebrn, Chassis Central Axle Lowbed Trailer Fine-grain steel welded construction Telescopic support leg in the front Telescopic rear support 2 wheel chocks with holder Steel fenders over both wheels Aluminium side underrun protection Central axle trailer drawbar assembly Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles & Suspension BPW drum brake axles "Axle/chassis laser alignment" – reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker balance) Wheels and Tyres 235/75 R 17.5'' Brand according to manufacturer’s choice Factory silver steel rims Braking System Ijdpfx Abszcnzaoxsth 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the tractor unit 24-volt ABS and ALB, with ABS connector at the front and connection cable Note: The trailer must only be towed by vehicles that ensure ABS functionality! Electrics 24-volt, multi-chamber lights, yellow LED side marker lighting 2 white position lights at the front 2 white/red lane-keeping lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connection cable Deck TTS Low-mounted steel tray, deck floor with steel/chequer plate covering, steel sidewalls solidly welded to floor Deck length 4,500 mm Front and side tray with 'Load-Lock' profile for lashing strap anchoring (front: 8 points; each side: 12 points) Note: Slight floor waviness possible due to welding distortion! 2 pairs of lashing rings, 1 pair at the front corners of the steel tray and 1 pair at the rear in the floor, each rated 5 tonnes Loading Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable With hand grip on the ramps Wood-covered (tip area with steel/chequer plate) Gas strut-assisted for one-person operation Operating Notes The stated gross weight is technically possible; depending on load, the gross weight may not be achievable while staying within allowed axle, drawbar, and kingpin loads (poor handling and tracking possible due to incorrect load distribution) Country of Registration/Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: Hot-dip galvanised including passivation “15-year warranty against rust-through” Note: Floor waviness possible due to hot-dip galvanising! Ramps: Hot-dip galvanised Note: The images shown are archive photos!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 2.520 kg, največja dovoljena obremenitev: 8.000 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 400 mm, skupna dolžina: 7.280 mm, skupna širina: 2.550 mm, skupna višina: 2.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are customised based on customer specifications. Chassis Central Axle Lowbed Trailer Fine-grain steel welded construction Gear support foot at the front Telescopic rear support 2 wheel chocks with holder Itjdpfjzcnugjx Abxjh Steel mudguards covering both wheels With anti-spray mudflaps only on the last axle Side underrun protection in aluminium Transverse stop at front, insertable into floor holes Coupling device for central axle trailer Drawbar with tested 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension BPW drum brake axles "Axles/chassis laser-aligned" – reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load balancing (rocker compensation) Wheels and Tyres 235 / 75 R 17.5" manufacturer's choice Steel rims, factory silver Brake System 2-line compressed air brake system Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to tractor unit Power sockets for electrics, ABS/EBS and air connection at the towing fork or drawbar 24-volt EBS electronic braking system with EBS plug at the front, including connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! "TPMS" Tyre Pressure Monitoring System according to ECE R 141, display via in-cab monitor through EBS Electrics 24-volt system, multi-chamber LED taillights, side amber LED lighting, LED licence plate lighting Side amber LED lighting connected to indicators (side marker lights blink) 2 white position lights at the front (LED) 2 white/red lane departure lamps at the rear (LED) Premium LED side marker lights, each with 20 LEDs per unit 2 x 7-pin non-interchangeable plugs at the front with connection cables Platform Low-profile steel trough, platform floor from steel/chequer plate, steel sides and floor robustly welded Platform length 5,500 mm Trough with "Load-Lock" profile at front and sides for lashing straps (8 at front, 16 per side) 2 pairs of lashing eyes: 1 at the front corners of the steel trough, 1 at the rear in floor, each rated 5 t 3 additional pairs of lashing eyes in the floor, each rated 5 t 4 pairs of lashing eyes screwed onto sidewalls Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable With hand grip on the ramps Timber-covered (tread area covered with steel/chequer plate) With gas strut for one-man operation Rear Wall / Rear corner posts Plywood board, 400 mm high, plug-in, positioned between ramps Operating Instructions The total weight specified is technically achievable. Depending on the cargo, the total weight may not be attainable due to statutory axle, support, and kingpin loads Registration / Signage Registration country: Germany Approval according to EC 2007/46 Prepared for single-line number plate holder Conspicuity marking with reflective tape in accordance with ECE R 048, white on sides, red on rear Warning sign according to ECE - 70 Customised Transport Solution

Stanje: pripravljen za uporabo (rabljen), Indramat KDA 2.1-100-3-A00-W1 AC – glavni pogon vretena 10637-009, strokovno popolnoma obnovljen in preizkušen, z 12-mesečno garancijo, 100 % delujoč, dobava skladno s fotografijami. Itodpfxjx Dw E Aj Abxoh

Stanje: pripravljen za uporabo (rabljen), Indramat KDS 1.1-100-300-W1 krmilnik SN:234547768256008, strokovno popolnoma obnovljen in preizkušen, z 12-mesečno garancijo, 100 % delujoč, dobava po fotografijah. Iodpfxji Ebhls Abxjth

Stanje: pripravljen za uporabo (rabljen), Indramat KDV 2.2-100-220/300-220 napajalnik, serijska številka po fotografiji, strokovno popolnoma obnovljen in preizkušen z 12-mesečno garancijo, 100 % delujoč, obseg dobave po fotografijah. Iodpji Ebi Uefx Abxeth

Stanje: pripravljen za uporabo (rabljen), SEV AT/MT1090-100 milling motor with collet chuck holder, SN:03102988. The plastic insert of the connector socket is slightly damaged (see photo). Used, with normal signs of wear. 100% fully functional. Scope of delivery as shown in the photos. Itjdpjkxh Ayjfx Abxsh

Stanje: novo, Schunk KSH 100-Z dvovzvojni blok za močnostno vpenjanje, največji delovni tlak 60 bar, neuporabljen v odprti originalni embalaži, 100 % funkcionalen, obseg dobave po slikah. Isdpfx Aex Eucwjbxsth

Stanje: pripravljen za uporabo (rabljen), Indramat KDA 3.2-100-3-A0S-W1 AV-glavni vretenasti pogon, SN:230902-731398-003, strokovno popolnoma obnovljen in preizkušen z 12-mesečno garancijo, 100 % brezhiben, dobava v skladu s fotografijami Iodpsi Ebg Iofx Abxeth

Stanje: pripravljen za uporabo (rabljen), Siemens 6AV9070-1AC00 operator panel extension VS 100 E, version A01, in opened original packaging, used, 100% functional Itedpfx Aji Edhqsbxsh

Stanje: pripravljen za uporabo (rabljen), Indramat KDV 2.3-100-220 / 300-000 Napajalnik, SN: 248468-02566, strokovno popolnoma obnovljen in preizkušen z 12-mesečno garancijo, 100 % delujoč. Obseg dobave skladno s fotografijami. Za ta artikel dogovorjeni prodajni popusti ne veljajo. Prosimo, za ceno povprašajte posebej! Itsdex Etyhjpfx Abxsh

Stanje: pripravljen za uporabo (rabljen), Indramat KDA 3.2-100-3-A00-W1 AC pogon glavnega vretena, serijska številka po fotografiji, strokovno popolnoma obnovljen in preizkušen z 12-mesečno garancijo, 100 % delujoč, obseg dobave po fotografijah. Itsdox Dw E Njpfx Abxjh