Binzel-Abicor Abiarc Dc 13.0X355 Mm nakup rabljenega (81.217)

Stanje: dober (rabljeno), Ogljikove elektrode, obložene elektrode, ogljikove spajalne palice, ogljikove elektrode -Proizvajalec: Binzel-abicor, paket ogljikovih elektrod Abiarc s 50 kosi -Tip: DC 13,0x355 mm -Ident. št.: 515.0020 Rjdpfx Aoyh U Iusgtjt -Količina: na voljo 5 paketov -Cena: na paket -Transportne dimenzije: 365/140/V75 mm -Teža: 4,6 kg/paket

Stanje: novo, Leto izdelave: 2022, obratovalne ure: 27 h, Znamka: ABICOR BINZEL Redpsxgnidofx Agtst Tip: xFUME ADVANCED Leto izdelave: 2022 Količina: 6 kosov Delovne ure: 27 Proizvajalec: ABICOR BINZEL Model: xFUME ADVANCED Število priključkov: 2 × Ø 60 mm Moč motorjev: 2 × 0,8 kW Podtlak: ca. 16.000 Pa Filter: PTFE kartuša, učinkovitost ≥ 99,95% Čiščenje filtra: pulzno s stisnjenim zrakom Funkcija avtomatskega start/stop: da (tokovna sponka) Dimenzije: ca. 370 × 370 × 940 mm Masa: ca. 40 kg Mobilnost: transportna kolesa

Stanje: rabljeno, Plazemski rezalnik, plazemski rezalni stroj MESSER GRIESHEIM tip Plasmastar HA 95 Tov. št. 4040323 Leto izdelave 1990 Moč 95 A – 60 % delovni cikel 45 A – 70 % delovni cikel Območje nastavitve 2 stopnji Rezanje 25 mm (čist rez) Maks. ločevalni rez 45 mm Ročna gorilnik PHC 95/140 Omrežni priključek 380 V, 50 Hz, vtikač 32 A - Vodno hlajenje - Nov ročni gorilnik BINZEL ABICOR, tip Abiplas Cut 200 W - Dolžina paketa cevi 6 metrov - Navodila za uporabo Mere D x Š x V 900 x 480 x 850 mm Teža 160 kg Redpfx Aeyah R Nogtst V zelo dobrem stanju

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Shelf connector, used ( for lateral mounting on rack uprights ) Total length: 391 mm Rack spacing approx.: 289 mm L-profile: 40 x 40 mm Centre-to-centre hole distance: approx. 353 mm Weight: 0.39 kg | each Material colour: sendzimir galvanized Rjdpfxsi A Iu Ae Agtjt

Stanje: dober (rabljeno), Samed Innovazioni MM 1 rezač vogalov za trde platnice Proizvedeno v Italiji, Samed Innovazioni Rebord. Zelo dobro ohranjena. Gre za profesionalno, proizvodno napravo za rezanje vogalov na trdih platnicah. Leto izdelave: 2014. Masivna konstrukcija zagotavlja natančnost pri delu. Rodpfewuni Nox Agtot Zamenljivi noži. Nastavljiva globina reza. V kompletu je en set nožev.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, dvižna višina: 10.000 mm, nosilnost: 5.000 kg, skupna dolžina: 10.500 mm, skupna širina: 2.330 mm, delovna višina: 10.000 mm, Oprema: dokumentacija / priročnik, Abus mostno dvigalo – Tip: enonosilno – Nosilnost: 2 x 2.500 kg = 5.000 kg – Dvižna višina: 10 m – Leto izdelave: 2024 – Tip dvigala: vitel z jeklenico Rsdpfxoy A Hvqo Agtjt – FEM/ISO razred dvigala: 2m / M5 Dimenzije – Razpon: 10.500 mm (od sredine do sredine) – Vgradna višina: 500 mm – Širina kolesnega sklopa z odbijači: 2.330 mm – Medosna razdalja: 1.900 mm – Lastna teža: 2.230 kg – Primerno za žerjavno tirnico: 50×30 mm Hitrosti – Dvig: 6/1 m/min (2 hitrosti) – Vožnja vozička: 20/5 m/min (2 hitrosti) – Vožnja dvigala: 40/10 m/min (2 hitrosti) Lastnosti – Upravljanje: radijsko daljinsko – Priročnik za dvigalo na voljo: da – Stanje: kot novo – Demontaža: ne, 5. maja 2026

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, dvižna višina: 6.000 mm, nosilnost: 4.000 kg, skupna dolžina: 6.000 mm, skupna širina: 2.430 mm, delovna višina: 6.000 mm, Oprema: dokumentacija / priročnik, Abus mostno dvigalo – Tip: enonosilno – Nosilnost: 4.000 kg – Dvižna višina: 6 m – Leto izdelave: 2021 – Tip dvigala: vrvno dvigalo – FEM/ISO klasifikacija dvigala: 3m / M6 Dimenzije – Razpon: 6.000 mm (od središča do središča) – Vgradna višina: 350 mm – Širina kolesnega sklopa z odbijači: 2.430 mm – Medosna razdalja: 1.900 mm – Teža: 1.310 kg – Primerno za žeravno tirnico: 50×30 mm Hitrosti Redpfjy A Huaex Agtjt – Dvig: 0,39 do 4 m/min (brezstopenjsko) – Vožnja vozička: 1 do 20 m/min (brezstopenjsko) – Vožnja žerjava: 1 do 20 m/min (brezstopenjsko) Značilnosti – Upravljanje: radijsko upravljanje – Priložen priročnik za žerjav: da – Stanje: kot novo, uporabljen le 2 leti – Demontiran: začetek maja 2026 – Na voljo 9 kosov – Na voljo tudi jeklena konstrukcija in dovodni sistemi (3× 35 m ali 4× 12,5 m)

Stanje: rabljeno, Pogonska moč / kW Volti / V Rjdpfoyn R Tpsx Agtst Tok 120 A Teža stroja pribl. 29 kg TIP: MDC 5.40 C/MM-1 120A 170 2000 vrt./min 29 kg

Stanje: rabljeno, Technical details: Welding current, stepless adjustment: 320 A Protection class: IP21 Rjdpfou Nwaxjx Agtst Total power requirement: 17 kVA Machine weight approx.: 132 kg Machine dimensions: 1.3 x 0.6 x 0.9 m TIG welding with 2-stroke; 4-stroke; spot welding and pulsed welding Switchable between 2-stroke and 4-stroke operation Cooling type: AF New components include: - 4.0 meter hose package, water-cooled - Ground clamp and ground cable, 4.0 meters - Pressure regulator

Stanje: rabljeno, Technical details: Welding current stepless: 400 A Protection class: IP21 Total power requirement: 23.2 kVA Machine weight approx.: 128 kg Machine dimensions: 1.3 x 0.5 x 0.9 m - TIG – Manual electrode welding and TIG - DC welding current - Cooling type: AF - Control switchable between 2/4-cycle spot welding, stepless The following components have been replaced with NEW ones: Redpfx Aeu Nwbiegtet - 4.0 meter hose package - 4.0 meter ground clamp and ground cable - Pressure regulator

Stanje: rabljeno, Technical Details: Welding current, infinitely variable: 320 / 100 A Protection class: IP21 Total power requirement: 17 kVA Machine weight approx.: 132 kg Machine dimensions: 1.3 x 0.5 x 0.9 m - TIG welding with direct current - TIG welding with pulsed current - Manual arc welding (MMA) 2/4-stroke control, spot welding, infinitely adjustable New components such as: - 4.0 meter hose package, water-cooled - 4.0 meter earth clamp and ground cable Redou Nwa Sopfx Agtst - Pressure regulator - TIG welding torch ERGO 301

Stanje: dober (rabljeno), Pnevmatski valj, zračni valj, standardni valj, vpenjalni valj, kompaktni valj Redsyguwpspfx Agtst - Proizvajalec: SMC, kompaktni valj tipa ECDQ2A80-300DC - Hodec: 300 mm - Batna palica: Ø 25 mm - Količina: na voljo 2 valja - Cena: na kos - Dimenzije: 420/100/H140 mm - Teža: 5,7 kg/kos.

Stanje: pripravljen za uporabo (rabljen), Fanuc DC spindle motor Model 15, note: type plate is no longer legible, used, heavy signs of use, 100% functional. Redpfx Aoi D Hvqogtjt ATTENTION: Please inquire separately for packaging and shipping costs!

Stanje: dober (rabljeno), Steklena vlakna, steklena runa, laminat, material iz steklenih vlaken Rjdpox R S Arjfx Agtst -Proizvajalec: Spheretex, steklena runa sphere core za laminiranje -Tip: sphere core SBC IP debelina 6,0 mm širina 100 cm 1 rola -Tip: BÜFA -Advanced Core CLM debelina 6,0 mm širina 127 cm 1,27 m² 3 role -Cena/dobava: komplet -Transportne mere: 600/400/V1280 mm -Teža: 12 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Rsdpfx Aomhhypogtst Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level. Redjmhh Dhepfx Agtjt

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) Rjdpfxomhh Dzs Agtot - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Redpfx Agomhhx Ijtot Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Rjdpsmhhyasfx Agtjt Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Rsdpfx Aoh Ek Dasgtjt Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) Rodpfx Asmhh Anjgtst - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard Rodpfxjmhhf Se Agtst - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Rjdpfx Agomhhl Hjtet Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg Rsdomidyfspfx Agtet - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times Redpfxomkixwo Agtst - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.