Bauer Mat Be 550 nakup rabljenega (28.114)

Leto izdelave: 2017, obratovalne ure: 2.000 h, stanje: rabljeno, Contact Mohamad Fattah Ahmad for further information. BAUER BE550 (used only once!) Scalping unit GS 500V for BE550 2x Desander BE 275-60 for BE550 Left and right completion 2x Pump unit BP 125 pumps 2x Cable remote control for BP pump, 10m each Piping kit Walkway BE550 complete Walkway BE550 for scalping unit GS 500V, complete Slurry tank ST-H25 Central control box BE550 Laodpfx Alsh Ty A Do Nea Radio control for Europe and extension cable for remote control 50m Optionally with KBKT pump

Stanje: rabljeno, Brush deburring machine, tube deburring machine BAUER Type BE 1 Machine No. Year of manufacture: 2005 Brush diameter: 250 mm Brush width: 25 - 60 mm Laodpfxehrkrws Al Nja Speed: 1500 / 3000 rpm Power: 2.2 / 3 kW Mains connection: 380 Volt, 50 Hz - Material support - New deburring brush Required space (L x W x H): 550 x 450 x 440 mm Weight: 65 kg Good condition

Stanje: rabljeno, Brush deburring machine, tube deburring machine BAUER Type BE 1 Mach. No. 29 Year of manufacture 1992 Brush diameter: 250 mm Brush width: 25 - 55 mm Laodpfx Ashrkrpel Nja Rotational speed: 1500 / 3000 rpm Power: 2.2 / 3 kW Mains connection: 380 Volt, 50 Hz - Material support Space requirement (L x W x H): 500 x 450 x 440 mm Weight: 45 kg Good condition

Leto izdelave: 2011, stanje: rabljeno, Intended use: Construction VAT/Margin taxation: VAT deductible For further information, please contact Mohamad Fattah Ahmad. Bauer MAT SKC-30-K Continuous Mixer Good condition Available immediately Lodjh Tyytepfx Al Njaa

Leto izdelave: 2011, stanje: rabljeno, Intended use: Construction VAT/margin scheme: VAT deductible Laodpfx Aloh Ty Daj Noa Contact Mohamad Fattah Ahmad for further information. Bauer - MAT Bentonite Pump BP 125 2 units available Good condition Immediately ready for use

Leto izdelave: 2011, stanje: rabljeno, Purpose: Construction VAT/Margin scheme: VAT deductible Please contact Mohamad Fattah Ahmad for further information. MAT Water Tank WB-1700 Good condition Lajdpfeh Ty A Sox Al Nea Immediately operational

Leto izdelave: 2011, stanje: rabljeno, Purpose: Construction VAT/Taxation: VAT deductible Contact Mohamad Fattah Ahmad for further information. Bauer MAT EP-12-1200 Progressive Cavity Pump Laedpfx Aleh Tyyps Nja Good condition Immediately ready for use

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Cutting diameter: 320 mm Saw band length: 3400 x 27 x 0.9 mm Cutting area at 90° (flat): 320 x 400 mm Cutting area at 45° (flat, left): 320 x 280 mm Cutting area at 45° (flat, right): 320 x 260 mm Cutting area at 60° (flat, right): 320 x 140 mm Band speed: 35 + 70 m/min Working height: 930 mm Voltage: 400 V Total power requirement: 2.67 kW Weight: 950 + 250 kg Well-maintained condition (!!) Current new price incl. accessories: approx. €40,000 Special price on request - Inspected condition - machine video - ?v=AHgMDxAcpgE Equipment: - Electro-hydraulic vertical miter bandsaw Laedpfxeym D Drj Al Noa - Large cutting capacity with a compact footprint - Robust material support table - Fully automatic miter cuts * Electro-hydraulic miter adjustment, left and right - Up to 99 cutting programs - Centralized operation of all machine functions from the front - Top-loading possible - Precise positioning thanks to accurate measuring system - Electro-hydraulic miter adjustment left and right - Electro-hydraulic material clamping - Electro-hydraulic saw bow feed * Infinitely adjustable (cutting pressure control) - Operating manual (PDF) * Special accessories included: - BAUER automatic material feed unit - Micro-dosing unit (spray lubrication system)

Stanje: pripravljen za uporabo (rabljen), Indramat KDA 3.3-150-3-A00-W1 AC pogon glavnega vretena, serijska številka: 256355-01253, strokovno popolnoma obnovljen in preizkušen, z 12-mesečno garancijo, 100% delujoč, obseg dobave po slikah. Ledox Dw Hgjpfx Al Nsaa

Stanje: rabljeno, Različni prekucni zabojniki z pokrovom in kolesi, na voljo v različnih velikostih, veliki in mali. Pošljite povpraševanje. Lsdpfxjyzrzie Al Neaa

Stanje: dober (rabljeno), Leto izdelave: 2019, Na prodaj je rabljena formatna krožna žaga Format4 Kappa 550 z dolžino reza 2800 mm. Stroj je bil obnovljen s strani naše servisne ekipe in je popolnoma delujoč. Tehnični podatki: - Dolžina reza 2800 mm - Širina reza 1000 mm - Višina reza 202 mm - Najv. premer žaginega lista 550 mm - X-motion upravljanje - Kotno letvico z dolžinsko kompenzacijo - Možnost odsesavanja Ø 120 mm - Moč motorja 7,35 kW / 10 KM - Letnik 2019 Ledoytrq Hspfx Al Njaa Stroj se nahaja v A-5431 Kuchl in ga je možno kadarkoli ogledati v času naših delovnih ur. Vmesna prodaja pridržana! Povezani pojmi: žaga, krožna žaga, formatna krožna žaga, format Referenca: R-J04DD

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Format 4 Kappa 550 Pozicionirno krmiljenje e-motion, TFT zaslon Leto izdelave 2016 320 cm pomični voziček 5,5 kW motor z zavoro Predrezalni agregat s kontrolo Maksimalna višina reza 200 mm Žagni list 250 – 550 mm Hitrosti 3000 / 4000 / 5000 min⁻¹ Obrati predrezala 9000 min⁻¹ Krmiljen vzporedni vodilo Nagib žaginega lista do 45° na eno stran Električna nastavitev nagiba in višine Upravljalna konzola v višini oči Prečni omejevalnik z digitalnim prikazom Premično oporno letvijo z digitalnim prikazom kota Prečni omejevalnik z dolžinskim izravnavanjem Priključek za odsesavanje 120 in 100 mm Konzola z vrtljivo funkcijo Širina reza 1348 mm Prečni omejevalnik do 3200 mm Ljdpsx Rugtofx Al Noaa Krmilno mesto na pomičnem stolu Mere 3400 x 2200 mm brez konzole Teža 1300 kg

Stanje: rabljeno, Leto izdelave: 1978, Maximum grinding diameter: 100 mm Regulating wheel width: 200 mm Maximum grinding wheel width: 200 mm Grinding diameter: 100 mm Grinding length: 250 mm Plunge depth: mm Working area: mm Speed: m/min Bar lengths: mm Total power requirement: 25 kW Machine weight approx.: 4,500 kg Space requirement approx.: m K O E N I G & B A U E R Centerless grinding machine for plunge grinding Type: M 150 - 5, Year of manufacture: approx. 1978, # 73.918 Ljdpfxet Hwtre Al Noaa Grinding range diameter, normal/maximum: 2 – 50 / 100 mm Max. workpiece length for through-feed grinding: approx. 250 mm Max. workpiece length for plunge grinding: approx. 200 mm Grinding wheel dimensions: diameter x width max.: 600 x 200 mm Regulating wheel dimensions: diameter x width max.: 300 x 200 mm Grinding wheel speed max.: 1,450 rpm or 35 m/sec Regulating wheel speed steplessly adjustable: 10 – 140 / 230 rpm Regulating wheel inclination: +3 / -5 degrees Stroke of both hydraulic dressing slides: approx. 200 mm Grinding wheel drive: approx. 18 kW Total drive: approx. 25 kW - 400 V – 50 Hz Weight: approx. 4,500 kg Accessories / Special equipment: • The machine is a centerless grinding machine specially equipped for plunge grinding cylindrical workpieces, with a manual infeed device for raw parts and a pneumatically controlled lifting device for finished parts. Removal of the workpiece is manual. • Currently installed is a workpiece support block with rail, corresponding to the workpiece diameter. • The regulating wheel slide is controlled by a hydraulic infeed device with automatic operation via a cam controller, plus fine adjustment via a stepper motor. • The grinding slide is stationary and only houses the hydraulic dressing device for the grinding wheel. • The lower regulating wheel slide can be swiveled up to 3° and carries the workpiece support block, allowing for easy correction of cylindricity errors. The upper regulating wheel support can also be tilted by plus/minus 5°. • Hydraulic dressing device mounted above the regulating wheel; hydraulic dressing device, tiltable for profiling shoulder profiles, behind the grinding wheel with template and stepper motor infeed for the dressing diamond, also for compensation, and equipped with a high-pressure coolant nozzle for grinding wheel flushing and diamond cooling. • The regulating wheel drive is infinitely adjustable, dressing speed 315 rpm, speed display included. • The control panel contains all functions like number of dressing cycles, number of workpieces, adjustable spark-out time, manual/automatic mode, etc. • Various grinding wheel flanges, lifting gear for wheel change, separate hydraulic unit and control cabinet, etc. • Currently no coolant unit installed. Condition: Good – under power and ready for demonstration, robust construction – ideal for grinding cumbersome workpieces.

Stanje: rabljeno, Gear motor, electric motor, geared electric motor - Motor manufacturer: Bauer Lajdpfx Alockbfij Nja - Gearbox manufacturer: Bauer - Speed: 45 rpm - Power: 1.5 kW - Mounting position: B3 - Shaft diameter: 40 mm - Protection class: - Dimensions: - Weight: 56 kg

Leto izdelave: 1994, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 073000312, TECHNICAL DETAILS Ljdpfx Aljlmmy Ue Neaa Grinding diameter: max. 200 mm Regulating wheel width: 400 mm Grinding wheel width: max. 400 mm Control system: Siemens 840 C Profile depth: max. 15 mm Max. workpiece length plunge grinding: 500 mm Grinding spindle drive: 50 kW Regulating wheel speed: 10 - 150 rpm Regulating wheel drive: 3 kW Regulating wheel adjustable angle: +2° / -6° Peripheral speed: 31.5 / 63 m/sec MACHINE DETAILS Machine weight: approx. 10 t Operating voltage: 400 V / 3-phase / 50 Hz Rated current: 160 A

Stanje: novo, Reduktorski motor Bauer DK66 SZ3-2211/163 L M 16435551-01, serijska številka po fotografiji, razmak pritrdilnih lukenj: 91 x 91 mm, Ø pogonska gred: 25 mm, neuporabljen z sledovi skladiščenja, 100% delujoč, dobava skladno s fotografijami. Lajdpfx Alei D E Dce Nja

Stanje: novo, Bauer E3-20/DO 56-170 B reduktorski motor SN:221314-3 z zavoro E 003 B, pokrov spojišča manjka, glej fotografijo, nerabljen, 100% delujoč, obseg dobave po fotografijah. Lodpfxji D E Dgj Al Njaa

Leto izdelave: 2015, stanje: rabljeno, Intended use: Construction VAT/taxation: VAT deductible For further information, please contact Mohamad Fattah Ahmad. Diameter: 368 mm Laedpfx Ash Ty Dpol Nsa Length: 4 m Connector: 254

Stanje: rabljeno, prevoženi kilometri: 822.008 km, moč: 260 kW (353,50 KM), prva registracija: 08/2002, vrsta goriva: dizel, število sedežev: 65, vrsta prenosa: mehanski, emisijski razred: Euro 3, barva: bela, zavore: retarder, Oprema: ABS, +++ Reconditioned Engine + Reconditioned Transmission +++ General: * Engine: Mercedes-Benz * Emission standard: EURO3 * Transmission: Manual gearbox * Total seats: 65 * Seats: 63+1+1 raised/fixed Safety: * Retarder * Cruise control * ABS * ASR (traction control) * Fog lights Passenger compartment: * Auxiliary heater * Curtains * Luggage racks * Adjustable air vents * Double glazing * Refrigerator * Tour guide microphone * Driver microphone * Space for stroller * Wheelchair space * Stop request button Exterior: * Destination display / matrix * Matrix manufacturer: Lawo * Number of double-width doors: 1 * Lifting/lowering system * Power steering * Tachograph disc * Sun visor * Electrically adjustable exterior mirrors * Central locking * Roof hatches * Roof fans * Roof ventilators Audio, Communication, Electronics: * Radio * Cassette Other: * German registration document * Twin tyres * Vehicle dimensions: Length 13.85 m, Width 2.5 m, Height 3.35 m Laedpfx Alsxmpils Nea * Wheel covers * Tyres: front approx. 50%, middle approx. 50%, rear approx. 50% Our internal vehicle number: 11872 Errors excepted. Images and text may vary from the actual vehicle. Over 300 vehicles available at all times.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, This FORMAT 4 KAPPA 550 panel saw was manufactured in 2021. It features a panel circular saw with a blade diameter of 250–550 mm and a cutting height of 202 mm at 90° and 140 mm at 45°. The machine supports three spindle speeds: 3000, 4000, and 5000 revolutions per minute, with a cutting width of 1250 mm and a sliding table stroke of 2800 mm. It is equipped with an e-motion control system and a telescopic crosscut fence for cuts up to 3200 mm. Please contact us for further information. • Saw blade diameter: 250–550 mm • Cutting height: 202 mm (90°), 140 mm (45°) Lajdpfx Asx D Exqsl Nsa • Saw blade speeds: 3000 / 4000 / 5000 rpm • Cutting width: 1250 mm • Cutting length (sliding table stroke): 2800 mm • Control: Kappa 550 e-motion • Cantilevered table support surface: 1250 x 650 mm • Telescopic crosscut fence for mitre cuts up to 3200 mm • Swivel range of the crosscut fence: 90° to 45° • Rear table extension behind the saw axis: 1200 mm • Parallel fence: positioned electronically via ball screw, enclosed and dustproof in the table

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Dolžina vozička 3800 mm Predrezilo Električna nastavitev višine in kota žage ter predrezila Električna sprememba položaja desnega prislona Digitalna upravljalna plošča na dotik Miza opremljena z dodatnimi stikali za žago Maksimalni premer lista 550 mm Skupna moč 7,35 kW Leto izdelave 2014 Napajanje 380V Laodpfx Ajymwy Tol Nsa

Stanje: novo, Leto izdelave: 2026, Kapaciteta ~ 15.000 m³/h Moč motorja 15 kW / 20 KM (opcijsko: 18 kW motor) Filtrirna površina 57,9 m² Premer izpušnega odprtina 400 mm Napetost 400 V Material filtra poliester Prepustnost filtra 3 mikroni Ledpex D Ah Njfx Al Noaa Mere filtra Ø 152 x 1120 mm Število filtrov 108 Dimenzije (D x Š x V) 4147,5 x 1129 x 2480 mm Teža 870 kg Obseg dobave: Poliestrski filter, 3 mikroni 5 posod 3 izpušne cevi Čiščenje filtra z vibracijskim sistemom z nadzorom Samodejni sistem čiščenja filtra z vibracijami omogoča neprekinjen nadzor delovanja filtra med odmori in med obratovanjem. Uporabljeni filtri so razvrščeni v filtrirni razred „G“ in omogočajo čiščenje zraka do 0,2 mg/m³/h (H₂).

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 5.553 h, število osi: 3, skupna višina: 3.000 mm, skupna širina: 5.000 mm, moč vretenovega motorja: 9.000 W, največja dolžina izdelka: 8.400 mm, največja hitrost vretena: 24.000 obr/min, This 3-axis Weeke Optimat BHC 550 was manufactured in 2003. It features a spacious table size of 4250 x 1300 mm and a powerful 9 kW main spindle with continuously variable speed ranging from 1,250 to 24,000 rpm. The machine is equipped with an 18-position tool changer and a drilling/milling unit with multiple configurations. If you are looking for a high-quality CNC woodworking machine, you should consider the Weeke Optimat BHC 550 we have for sale. Contact us for further details. • Table size: 4250 x 1300 mm • 8 consoles incl. lifting rail • Dual-circuit vacuum block extraction • Vacuum port for template operation • Y-stop rail for overlay overhang • Main spindle: HSK F63, liquid circulation cooling • Max. tool diameter: 180 mm • Aggregate interface for main spindle, C-axis with torque transmission and 3-point support • Tool changer: 18 positions (movable in X), 8 positions (movable in Y) • Drilling/sawing/milling unit with ER25 • Drilling/milling unit, manually swivels 90°, with ER25 • Drilling unit: horizontal in X: 4; horizontal in Y: 2; vertical: 19 • Grooving saw in X direction, tool diameter 100 mm • Hand terminal for machine control with potentiometer • Control/software: Windows XP, WoodWOP 5.0, network connection possible • 2004 new hard drive Lajdpjyxrdrjfx Al Nsa Additional equipment • Vacuum pump (included in delivery)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 443 h, Format 4 Panel Saw Kappa 550 e-motion - 10 kW, 3 speeds: 3000/4000/5000 rpm - Year of manufacture: 2017 - Scoring unit operational indicator - Cross-cut fence 3200 mm, swivels 90°–45°, with two stop jaws - Extension table 1250 x 650 mm - "X-Roll" sliding table, cutting length 3200 mm, squaring shoe Ledsw Tfahjpfx Al Neaa - Position-controlled rip fence with digital readout at the operator panel, cutting width 1250 mm - Overhead guard: hood for 90° cuts and hood for mitre cuts, height adjustable and can be swung out of the working area - e-motion control, 15" color touch screen, operator panel at eye level. USB interface and network-ready, adjustable and can be moved out of the working area - Saw blade diameter 250–550 mm, max. cutting height 202 mm - Position-controlled height and tilt adjustment 0°–46° - Table extension up to 1200 mm behind the saw axle, powder-coated steel - Weight: 1300 kg - Scoring unit operational indicator - Total operating hours: 443.47 h - Includes many as-new saw blades and grooving saw blade Price ex works Transport available at extra cost!

Stanje: rabljeno, prevoženi kilometri: 296.877 km, moč: 125 kW (169,95 KM), prva registracija: 12/2015, vrsta goriva: dizel, konfiguracija osi: 4x2, medosna razdalja: 3.000 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 70 l, barva: rumena, vrsta prenosa: samodejen, število prestav: 6, emisijski razred: Euro 5, Leto izdelave: 2015, Oprema: ABS, Bluetooth, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, elektronski program stabilnosti (ESP), klimatska naprava, nadzor oprijema, sistem za pomoč pri speljevanju v klanec, tempomat, Informations générales Nombre de portes : 2 Gamme de modèles : mai 2014 - août 2016 Type de cabine : simple Informations techniques Couple : 430 Nm Nombre de cylindres : 4 Cylindrée moteur : 2 998 cm³ Poids Poids à vide : 1 950 kg Charge utile : 1 550 kg PTAC : 3 500 kg Intérieur Intérieur : gris Nombre de places assises : 2 Entretien, historique et état Nombre de propriétaires : 2 Contrôle technique (APK) : valable jusqu'à 12/2026 Nombre de clés : 1 (1 clé à télécommande) Sécurité du produit Fabricant : Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Autres options et équipements = - Prise 12 volts - Accoudoir - Kit mains libres - Vitres électriques avant - Répartition électronique de la force de freinage - Airbag conducteur - Verrouillage centralisé à distance - Vitres teintées - Pré-tensionneurs de ceinture - Volant réglable en hauteur - Climatisation - Volant multifonction - Radio - Immobiliseur Ledpfx Aoy Ai Ivel Njaa - Téléphone avec Bluetooth - Vitrage thermique