Barsso Z-Armmenger 500L. nakup rabljenega (61.559)

Stanje: novo, novo! v celoti iz nerjavečega jekla brezstopenjska regulacija hitrosti mikrokontroler varnostni pokrov (hidravlični) z oznako CE Fedpfx Acozy Nhzocegg + sistem za dovajanje materiala za standardne posode Posebej zasnovano za proizvodnjo proteinov in energijskih ploščic.

Stanje: novo, novo! iz nerjavečega jekla brezstopenjska nastavitev hitrosti 4–30 mikrokrmilnik varnostni pokrov (hidravlični) z oznako CE maks. obremenitev: ± 550 l zunanje dimenzije (D x Š x V): ± 2780 x 1420 x 2020 mm (pri odprtem pokrovu: V: 3260 mm) + naprava za doziranje za standardne posode Posebej zasnovano za proizvodnjo proteinov in energijskih ploščic. Fjdpfezx U Htex Accjgg (priložene so fotografije podobnega mešalnika s prostornino 500 litrov)

Leto izdelave: 2011, stanje: dober (rabljeno), Newmix Atmi Life Sciences Dvoplaščni mešalnik z lopaticami 15883-005 Fgedpjd Tw Izjfx Accjg Leto 2011, nerjavni farmacevtski mešalnik s 500L mobilno posodo s dvojnim plaščem, upravljanje preko zaslona na dotik, minimalna - maksimalna temperatura 0-90 °C, volumen plašča 6L, enofazni priklop

Stanje: novo, Leto izdelave: 2026, CORMAK LUFT 700 VSD+PM Compact Rotary Screw Compressor with Dryer – Compact Set for Demanding Applications – ENERGY SAVER THE SET INCLUDES: - LUFT 700 VSD+PM COMPACT rotary screw compressor with integrated dryer - 500 L horizontal compressed air receiver Key features that distinguish these models: Fgodpsycg Ryjfx Acceg 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series use Permanent Magnet (PM) motors. Unlike standard induction motors: - They achieve efficiency levels meeting IE4 or even IE5 standards. - They maintain high efficiency even at very low speeds (whereas standard motors lose efficiency outside their nominal range). - They are smaller, lighter, and generate less heat. 2. Advanced Variable Speed Drive Control (VSD) The core of the Energy Saver line is the frequency inverter (VSD drive): - Demand-driven operation: The compressor does not work in an 'all or nothing' (load/unload) system. If your equipment requires only 30% output, the compressor reduces speed, consuming proportionally less energy. - Elimination of idling: Conventional compressors often run for several minutes after the tank is filled, consuming about 25–30% of nominal power without producing air. Energy Saver models almost completely eliminate this inefficient process. 3. Soft Start Thanks to the VSD, these devices start smoothly from 0 Hz. This means no sudden current spikes during startup, which: - Protects your plant’s electrical installation. - Enables more frequent starting and stopping of the machine without the risk of motor winding overheating. 4. Real Energy Savings In practice, the use of the Energy Saver line can reduce energy bills by 30% to 50% compared to traditional fixed-speed compressors. In addition, the system maintains very stable network pressure (accurate to 0.1 bar), which is crucial for precision machines such as laser cutters. Long service life: The absence of sudden pressure and temperature spikes extends the working life of the screw unit. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Capacity 0-6 bar: avg. 690 L/min Capacity at 6 bar: 690 L/min Capacity at 8 bar: 650 L/min Capacity at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 x 640 x 1470 mm Weight: 320 kg

Stanje: novo, novo! iz nerjavečega jekla brezstopenjska nastavitev hitrosti nadzor s programirljivo logično enoto (PLC) 2 smeri vrtenja zložljiva inšpekcijska lestev pnevmatski varnostni pokrov izpraznitev v smeri naprej skozi izpustno loputo z oznako CE zunanja mera (D x Š x V): ± 2.640 x 1.370 x 1.890 mm + sistem za nakladanje za standardne vagone Fsdezy Nd Njpfx Accjgg

Stanje: novo, novo popolnoma iz nerjavečega jekla Premer 1.250 mm nastavljiva višina 820 – 910 mm z ograjo višine 10 mm 1 hitrost (3 obrati na minuto) 0,12 kW na voljo tudi z brezstopenjsko regulacijo hitrosti Fgodpfozwu Hksx Accog

Stanje: novo, Leto izdelave: 2026, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key advantages of the 500 L pressure vessel - Professional pressure-resistant design – made from high-grade, 4 mm thick steel, resistant to pressure and corrosion. - UDT certification and CE marking – compliance with European safety and quality standards. - Operating pressure of 11 bar – suitable for most pneumatic systems, including those with higher requirements. - Large capacity – 500 liters – enables stable supply to pneumatic installations and reduces compressor start-stop frequency. - Multi-connection system – as many as 6 ports in sizes 1.1/4", 2", and 1/2" allow flexible integration into different systems. - Premium quality finish – durable internal and external anti-corrosion coating. - Universal installation – vertical design saves space in the workshop. Construction and technology – robust design for demanding applications This compressed air tank is engineered for intensive use in industrial environments. The shell’s 4 mm wall thickness of structural steel ensures resistance to working pressures up to 11 bar and provides long-term durability. All welds undergo strict quality control, and the tank surfaces are protected by a corrosion-resistant coating, durable against chemicals and environmental factors. The tank is fitted with a nameplate bearing the CE marking and UDT notified body number, which authorizes its use in both Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and materials certificates. Precision and operational efficiency – stable pressure and optimized compressor performance With its large 500 L capacity, the vessel acts as an air buffer, stabilizing system pressure. This ensures smooth operation of all compressed air-powered devices and significantly extends compressor life by minimizing its start-stop cycles. The vertical configuration allows for space-efficient installation, ideal for facilities with limited space. A properly matched tank minimizes pressure drops and prevents overload in the pneumatic system, thereby boosting overall efficiency and safety. Standard equipment Fgedpjxby D Asfx Acceg - 6 connection ports: sizes 1.1/4", 2", and 1/2" - Nameplate with CE marking - UDT notified body number - Full technical documentation and pressure vessel passport - Internal and external anti-corrosion coating

Stanje: zelo dobro (rabljeno), Hidravlična stružna glava Leitz Rezalno orodje: Z 6 Premer oboda (ø): 145 mm Fgedozwwmtopfx Accsg Premer luknje: 50 mm Dolžina: 60 mm Vrsta pritrditve: Hidravlična Cena za kos.

Stanje: novo, Leto izdelave: 2025, Sita za štirigredne drobilce Modeli: RS, ZM, ZMK, GZ Tip: SB-450, SB-760, SB-960, SB-1030, SB-1230 Leto: 2025 Nov del / pripravljen za uporabo Smo proizvajalec rezervnih nožev in nadomestnih delov za drobilce in sekljalnike. Fsdexn Namepfx Accjgg Prosimo, da ob povpraševanju navedete ime proizvajalca in tip stroja.

Stanje: novo, Leto izdelave: 2025, Rotacijski nož Model: LINDNER Fgjdpfexn Nyajx Accjg Tip: MICROMAT Leto izdelave: 2025 Novo / Takoj pripravljeno za uporabo 1. Nož 43x43x20 2 kos (KR) 2. Nož 43x43x20 2 kos (K8) 3. Nož 43x43x23 1 kos (KR) 4. Nož 43x43x23 2 kos (K8) Proizvajamo nadomestne nože in rezervne dele za drobilce in sekljalnike. Ob naročilu navedite tip noža.

Stanje: novo, Leto izdelave: 2025, Rotacijski nož Model: LINDNER Tip: ANTARES Letnik: 2025 Fjdpfx Aexn Nvhsccsgg Nov / takoj pripravljen za uporabo Izdelujemo rezervne nože in nadomestne dele za drobilce in sekljalnike. Ob naročilu navedite tip noža.

Stanje: novo, Leto izdelave: 2025, Rotacijski noži Model: WEIMA, GROSS, VECOPLAN Tip: WL, WLK, GAZ, VAZ Fodpsxw Nrbofx Accegg Leto izdelave: 2025 Novi / Takoj pripravljeni za uporabo 1. Nož 40x40x25 M12 (PC) 2. Nož 40x40x25 M12 (KR) 3. Nož 40x40x25 M14 (KR) 4. Nož 40x40x20 M12 (KR) 5. Nož 40x40x16 M10 (KR) Izdelujemo nadomestne nože in rezervne dele za drobilce in mline. Prosimo, ob naročilu navedite tip noža.

Stanje: novo, Leto izdelave: 2025, Strgalo nož Fedpoxn I R Refx Accsgg Model: WEIMA, GROSS, UNTHA Tip: ZM30, GZ30, RS30 Letnik izdelave: 2025 Novo / takoj pripravljeno za uporabo 1. Rezilo 8Z-66 2. Rezilo 4Z-66 Smo proizvajalec rezervnih nožev in delov za drobilce in sekljalnike.

Stanje: novo, Leto izdelave: 2025, Rezila za rezanje Model: WEIMA, GROSS, UNTHA Tip: ZM40, GZ40, RS40 Letnik izdelave: 2025 Nova / takoj pripravljena za uporabo 1. 1Z-86 rezilo Fgedpfx Acoxn H Stjcsg 2. 2Z-86 rezilo Smo proizvajalec rezervnih rezil in delov za drobilce in sekače.

Stanje: novo, Leto izdelave: 2025, Strgalo nož Model: WEIMA, GROSS, UNTHA Tip: ZM40, ZMK50, GZ40, RS40, RS50 Letnik: 2025 Nov / takoj pripravljen za uporabo 1. 8Z-86 nož Fsdpfx Asxn Iyfsccogg 2. 4Z-86 nož Smo proizvajalci rezervnih nožev in nadomestnih delov za drobilnike in sekljalnike.

Stanje: novo, Leto izdelave: 2025, Rezalni noži Model: WEIMA, GROSS, UNTHA Tip: ZM40, ZMK50, GZ40, RS40, RS50 Letnik: 2025 Novi / takoj pripravljeni za uporabo 1. Nož 1Z-115 Fsdjxn H Saspfx Accsgg 2. Nož 2Z-115 3. Nož 3Z-115 Smo proizvajalec nadomestnih nožev in rezervnih delov za drobilce in sekljalnike.

Stanje: novo, Leto izdelave: 2025, Rezila za rezanje Model: WEIMA, GROSS, UNTHA Fedpfx Acexn Ibvjcjgg Tip: ZM30, GZ30, RS30 Leto izdelave: 2025 Nova / takoj pripravljena za uporabo 1. Rezilo 1Z-66 2. Rezilo 2Z-66 Smo proizvajalci rezervnih rezil in delov za drobilce in sekljalnike.

Stanje: rabljeno, Siemens krmiljenje. Po naši oceni je stroj v dobrem rabljenem stanju in ga je mogoče po predhodnem dogovoru ogledati pod napetostjo. Fgjdpfx Aozzrhtsccsg Dodatna oprema, prikazana orodja in vpenjalna sredstva so vključeni v obseg dobave le, če je to navedeno v dodatnih informacijah. Spremembe in napake v tehničnih podatkih ter vmesna prodaja so pridržane!

Stanje: rabljeno, Leto izdelave: 2007, Krmilnik SIEMENS 840D powerline Vretenčni motor 11 kW Premer brusilnega diska 400 mm Širina brusilnega diska 100 mm Po naši oceni je stroj v dobrem, rabljenem stanju in ga je mogoče pregledati v delovanju po dogovoru o terminu. Fedpfozy Sinsx Accsgg Dodatna oprema, orodja in vpenjalne priprave, prikazane na slikah, so del ponudbe le, če je to posebej navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih in specifikacijah ter do predčasne prodaje!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, obratovalne ure: 500 h, vhodna napetost: 230 V, vhodni tok: 15 A, vhodna frekvenca: 60 Hz, Ponujamo zelo dobro ohranjen 3D-tiskalnik Z Corporation ZPrinter 650, izdelan leta 2015. Fgodpfx Acozzk Ufjcog Napetost: 100/115/230 V Jakost toka: 15/15/8 A Frekvenca: 50–60 Hz Smo delavnica za ljudi s posebnimi potrebami in tiskalnik oddajamo, ker več ne zaznavamo tako velikega povpraševanja po izdelkih. Tiskalnik je bil malo uporabljen, zato je v zelo dobrem stanju. Če imate kakšna vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7541 Technical specifications: - Max main saw blade diameter (without scoring unit): 400 mm - Max main saw blade diameter (with scoring unit): 350 mm - Saw blade bore diameter: 30 mm Fgsdpfx Aoztavveccjg - Max cutting height with 400 mm blade: 90° – 120 mm, 45° – 85 mm - Max cutting height with 350 mm blade: 90° – 95 mm, 45° – 67 mm - Main blade adjustable vertically and for bevel cuts - Saw blade guard included - Equipped with side sliding table - Cutting length on sliding table: 1700 mm - Cutting width on sliding table: 1400 mm - Cutting width at rip fence: 1350 mm - Main motor: 6 kW - Table dimensions: 1190 x 990 mm - With table extension: 1880 mm - With table elongation: 1890 mm - With scoring unit - Max scoring blade diameter: 120 mm - Scoring spindle diameter: 20 mm - Scoring motor: 0.75 kW - 3 spindle rotation speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80/120 mm - Dimensions (LxWxH): 3050 x 2200 x 1600 mm - Weight: 800 kg ADVANTAGES – Manufactured in Poland – DTR technical documentation included – Saw blade guard – With scoring unit – With table extension and enlargement – Used saw, very good condition Net price: PLN 15,900 Net price: EUR 3,780 (based on an exchange rate of 4.2 EUR) (Prices subject to change with significant exchange rate fluctuations.)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Odsesavanje oljne megle iz CNC strojev, filter separator Agfa / ABSOLENT Ventilator z močjo 0,63 kW Premer sesalne odprtine: 160 mm Pretok do 500 m3/h Nova glavna filtrirna kartuša Filter Agfa / Absolent je eden najučinkovitejših filtrov za oljno meglo in oljni dim na svetu. Zahteva zelo malo vzdrževanja, saj lahko deluje več let brez zamenjave filtra, kar se odraža v zelo nizkih stroških obratovanja. Zaradi svoje konstrukcije in velike površine filtra ponuja tako dolgo življenjsko dobo kot tudi stalno visoko stopnjo separacije. Zaradi svoje konstrukcije lahko filter deluje neprekinjeno in brez prekinitev. Fgsdpfxjzva Tmj Accjg Težko se nabira na dnu filtra in jo je mogoče ponovno uporabiti.

Stanje: novo, new! completely stainless steel 2 speeds (20 and 40 revolutions per minute) 2 rotation directions 3.7 / 4.5 kW foldable inspection staircase safety cover front discharge via a discharge flap with CE marking Fedpezy U Umefx Accegg External dimensions (L x W x H): approx. 1,970 x 1,000 x 1,750 mm (with open lid: H: 2,250 mm) Suitable for feeding with “Easy Connect” Loading height approx. 1,450 mm Drum dimensions (L x W x H): approx. 1,000 x 765 x 665 mm + feeding system for standard trolleys

Stanje: novo, new! completely stainless steel 2 speeds 2 directions of rotation 1.8 kW – 2.5 kW safety lid with CE marking Fjdpfezy U Tvex Accogg suitable for loading with 'Easy Connect' easy to clean hinged safety lid External dimensions (L x W x H): 1,676 x 830 x 1,428 mm (open lid: H: 1,985 mm)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, potovalna razdalja osi X: 750 mm, pomik osi Y: 430 mm, pomik po osi Z: 530 mm, proizvajalec krmilnikov: FANUC, model krmilnika: Oi MF5, skupna višina: 2.850 mm, skupna širina: 2.600 mm, širina mize: 420 mm, dolžina mize: 750 mm, obremenitev mize: 400 kg, skupna masa: 5.000 kg, največja hitrost vretena: 11.000 obr/min, moč vretenovega motorja: 11.000 W, število mest v zalogovniku orodij: 24, največja dolžina izdelka: 2.400 mm, število osi: 4, Ta 4-osni Z-YANG V7L je bila proizvedena leta 2021. Ima X-hod 750 mm, Y-hod 430 mm in Z-hod 530 mm. Stroj je opremljen s krmiljem FANUC Oi MF5, zmogljivim 11 kW motorjem vretena ter samodejnim menjalcem orodij za 24 orodij. Če iščete kakovostne možnosti za obdelavo kovin, priporočamo vertikalni obdelovalni center Z-YANG V7L, ki ga imamo naprodaj. Za več informacij nas kontaktirajte. • Samodejni menjalec orodij: 24 orodij • Hitri pomik: 48 m/min • Podajalna hitrost: do 15 m/min Fedpfx Aszvu S Dsccjgg Dodatna oprema • Transporter za ostružke (vključen) Tehnične specifikacije Stožec BT 40