Atemag Agregati In Stožčasti Zobniki nakup rabljenega (121.198)

Stanje: rabljeno, Leto izdelave: 2018, Used angle aggregate for Holz Her CNC machining centers Year of manufacture: 2018 HSK 63 F tool holder with torque support with 2 horizontal tool spindles suitable for holding a CLAMEX groover and a saw blade Technical data: Laedpfx Alswkbcns Isb Max. drive speed: 8,000 rpm Max. output speed: 12,000 rpm Permissible operating temperature: 85°C Aggregate swivels 360° around the drive axis Sound level: 80 dB(A) Weight: 3.257 kg Availability: short notice Location: Hochheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, skupna masa: 750 kg, skupna dolžina: 1.275 mm, skupna širina: 560 mm, skupna višina: 745 mm, prenosno razmerje: 160, vrtilni moment: 14.560 Nm, premer gredi: 125 mm, 1 kos industrijskega stožčasto-čelnega zobniškega prenosa od Proizvajalec: Penig DDR TGL: 21815 Tip: 10LA1-224/315 Stanje: iz skladiščne razprodaje (verjetno nikoli uporabljen) največji trajni navor: 14.560 Nm Prenosno razmerje: i = 160 : 1 Natančna vrednost prenosa: Izkoristek: 97% Prenesena moč pri: 1400 o/min-(8,7 o/min) = 13,5 kW 950 o/min-(5,9 o/min) = 9,0 kW 710 o/min-(4,4 o/min) = 6,8 kW Polnjenje z oljem: 85 kg Teža: 750 kg Premer gredi d1: 35 mm Premer gredi d2: 125 mm Višina gredi h1: 400 mm Skupna višina h2: 745 mm Dolžina: 1275 mm Širina: 560 mm (brez gredi) Lasdpfx Asxtxphjl Iob Na voljo tudi velike sklopke za gredi!

Leto izdelave: 2016, stanje: novo, 1 piece of factory-overhauled, unused industrial bevel helical gearbox by ASUG, TGL 21815. Lasdpegwlrdjfx Al Iob All gearbox components have been replaced, except for the housing! Claw coupling: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil fill: 170 kg Input speed (n1): 1400 rpm Output speed (n2): 17.5 rpm Weight: 1,450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Base length: 1,170 mm !! Gearbox is supplied WITHOUT oil cooler !!

Leto izdelave: 2016, stanje: novo, 1 piece, original packaging, unused industrial bevel-helical gear unit Manufacturer: Flender Design: B3SH Size: 17 Version: F Maximum torque: 130,000 Nm Gear ratio: i = 25.409 Maximum power: 800 kW Oil fill: 290 liters Input speed: n1 = 1500 rpm Lsdpsmczixjfx Al Isab Output speed: n2 = 59.03 rpm Weight: 5,450 kg Shaft diameter d1: 1 x 110 mm Shaft diameter d2: 2 x 250 mm Center height h1: 550 mm Overall height h2: 1,290 mm Length (base): 1,740 mm Width without shafts: 690 mm Width with 2x shafts: 1,650 mm Gear unit is equipped with an oil circulation lubrication system Ø50 mm, backstop, thermometer, 2x heating rods 1,800 Watt / 230 Volt Shipping packaging dimensions: Length: 2,790 mm Width: 1,950 mm Height: 1,930 mm Weight with packaging: 6,099 kg

Stanje: novo, Leto izdelave: 2021, Compact horizontal unit with two tool outputs for Clamex processing (P14) in the middle of the panel - For Clamex processing (P14) in the centre of the panel - Suitable for drilling and milling Laedpowb Eg Sefx Al Iob Technical data: Max. drive speed: 8,000 rpm Max. output speed: 12,000 rpm Transmission ratio i = 1:1.48 Max. torque Mt = 15 Nm Permissible operating temperature: 85°C Unit can be rotated 360° around the drive axis

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, ATEMAG Function Line QUATTRO – CNC menjalna enota s 4 izhodi – nova/nerabljena Na prodaj je nova, nerabljena CNC menjalna enota priznane blagovne znamke ATEMAG (Izdelano v Nemčiji). Gre za Function Line QUATTRO agregat s štirimi izhodi, idealen za obdelovalne centre blagovnih znamk SCM, Biesse, Homag, Morbidelli in drugih. Tehnični podatki Proizvajalec: ATEMAG Model: Function Line QUATTRO (F-1110) Vpenjalo orodja: SK30 Maks. hitrost: 15.000 1/min Izhodi: 4 Avtomatska menjava orodja (ATC) Originalna navodila za uporabo in preizkusni protokol priloženi Vključno z dodatno opremo (ključ, vpenjalni vijak itd.) Stanje Novo / nerabljeno / originalno zapakirano Lsdjxbh A Tjpfx Al Ijab Z merilnim in preizkusnim protokolom

Stanje: rabljeno, Leto izdelave: 1998, Workpiece diameter with 1:10 ratio: 300 mm Workpiece diameter with 1:1 ratio: 212 mm Number of teeth – max.: 200 Number of teeth – min.: 6 X travel: 300 mm X-axis speed: 0.1–5,000 mm/sec Y travel: 400 mm Y-axis speed: 0.1–5,000 mm/sec A-axis: -170° / +170° Control system: Siemens Sinumerik 840 C Lodpfxsul El Ts Al Ieab Total power requirement: 38 kW Machine weight approx.: 10 t Space requirement approx.: 4.20 × 2.20 × 2.10 m

Stanje: rabljeno, Leto izdelave: 2000, Technical Details: Wheel Diameter - max.: 275 mm Wheel Width: 55 mm Module - max.: 6.5 Module - min.: 1.5 Face Hobbing - Continuous Process Continuous Method: Workpiece and tool (usually Spiron) rotate simultaneously; all teeth are generated in a single working cycle. The cutter head has several groups of cutters (not arranged in a circle). Teeth profile of constant height. Tapered tooth top surface. Single Indexing Method: The workpiece remains stationary and the tool (usually Arcon) rotates and cuts a tooth by plunging in. Once one tooth is cut, the tool retracts from the tooth space, the workpiece rotates by one tooth width, and the next tooth is cut. This is repeated until all teeth are completed. Ljdpfxsv N Hilo Al Isab The cutter head has all cutters arranged on a circular path. Tapered tooth height. Parallel tooth top surface. The C28 is capable of both operations, gear + pinion. For the single indexing process, however, the C28 has to be 'prepared.' This means: direct measuring system + component gearbox brake for the workpiece axis + license file for producing single indexing process.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, premer kolesa: 275 mm, širina kolesa: 150 mm, potovalna razdalja osi X: 640 mm, pomik osi Y: 870 mm, premer obdelovanca (maks.): 275 mm, TECHNICAL DETAILS Wheel diameter: 275 mm Wheel width: 150 mm Max. module: 6 Min. module: 1.5 Workpiece diameter: 275 mm Max. gear width: 5.5 mm Spiral angle: 0 - 60° Number of teeth: 5 - 120 Min. transmission ratio: 1:1 Max. transmission ratio: 1:10 Milling Depth Axis (X Axis) Travel: -25 to 640 mm Max. travel speed: 6 m/min Workpiece Positioning Axis (Y Axis) Travel: 870 mm Max. travel speed: 4.5 m/min Axis Offset (Z Axis) Travel range: +/- 50 mm Max. travel speed: 0.657 m/min Laedsywgy Sspfx Al Iob Generating Rotation Axis (A Axis) Swivel range: 315° Max. swivel speed: 40°/s Workpiece Spindle (B Axis) Max. workpiece spindle speed: 300 rpm Outer taper (1:4) acceptance diameter: 140 mm Inner taper (1:20): 99.218 mm Workpiece spindle bore: 90 mm Workpiece Swivel Axis (C Axis) Swivel range: -8.5 to 98° Max. swivel speed: 21.5°/s Tool Spindle (D Axis) Tool spindle speed: 60 to 350 rpm Tool Positioning Axis (E Axis) Swivel range: 0 to 360° Max. swivel speed: 19.5°/s Machine Distance (V Axis) Travel: 150 mm Max. travel speed: 1.6 m/min MACHINE DETAILS Cutter Drive Motor Power: 20 kW Workpiece Drive Power: 14.5 kW Total connected load: 62 kVA Dimensions & Weight Machine weight: approx. 12 t Space requirement: approx. 4,700 x 4,387 x 2,450 mm EQUIPMENT 13 cutters

Stanje: dober (rabljeno), Maximum wheel diameter: 1600 mm Wheel width: 250 mm Module – max.: 30 Module – min.: 8 Tooth height: 58 mm Tooth width: 250 mm Machine weight approx. 42.3 t Space requirements approx. 4.45 x 6.00 m - Cone distance in mm for spiral angle 30° Minimum: 150 Maximum: 800 - Cone angle, in degrees Minimum: 5 Maximum: 85 - Tooth angle Minimum: 0° Maximum: 45° - Number of teeth to be cut Minimum: 10 Maximum: 150 The machine is complete, fully functional, and in good condition. Equipment / Accessories: - Complete set of change gears - 4 cutter heads - Various milling cutters - Operating manual in English Ledpfx Alou Dbucs Isab

Stanje: rabljeno, Leto izdelave: 2021, Expozicijska enota (malo rabljena) Enota za rezanje mehkih materialov, kot so satovje, akustični elementi in tkanine, z nihajnimi gibi Možnosti obdelave: rezanje ravnih ali radialnih izrezov Tipična področja uporabe: • Tekstil: rezanje tkanin ali tekstilij (npr. usnje, klobučevina itd.) • Razrez satovja pri vratih, stopniščni gradnji, sejemski gradnji, gradnji avtodomov • Akustični elementi: rezanje poliestra, pene ali drugih zvočno absorpcijskih materialov • Letalstvo, ladjedelništvo, vesoljska industrija: rezanje satovja (honeycomb core) Tehnične specifikacije Največja vhodna hitrost vrtenja: 6.000 min-1 Največja izhodna hitrost vrtenja: 9.000 min-1 Prenos: 1 : 1,48 Največji navor: 8 Nm Dovoljena obratovalna temperatura: maks. 85°C Položaj nosilca navora glede na orodje: 360° Kot obdelave: 0° Št. izhodov za orodje: 1 / fiksno Mazanje: mast / polnjenje za celotno življenjsko dobo Amplituda: 4 mm Frekvenca: 150 Hz Lokacija skladišča: Garbsen. Lsdpfxevvi Iqs Al Ieab

Stanje: zelo dobro (rabljeno), Leto izdelave: 1981, skupna masa: 64.000 kg, Drop hammer Huta Zygmunt 7000 kgm, manufactured in Romania under license. Identical to the MPM 2000A model. Lsdpfjlnk Tyex Al Ijab

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, skupna masa: 35.000 kg, Ковашки чук HUTA ZIGMUNT тип MPM 1000A, 3600 кгм, произведен в Румъния, модел CM 1250. Ljdpjtgpdzofx Al Ieab

Stanje: zelo dobro (rabljeno), Prodajam originalni pnevmatski dviž J.D. Neuhaus PROFI, model LN-1T, z nosilnostjo 250 kg (0,25 t). Izdelano v Nemčiji, leto 1991, tovarna J.D. Neuhaus Hebezeuge GmbH & Co., Witten-Heven – svetovni vodilni na področju pnevmatskih dvižnih sistemov. Tehnični podatki: • Model: PROFI LN-1T • Nosilnost: 250 kg (0,25 t) • Leto proizvodnje: 1991 • Napajanje: zrak 6 bar • Poraba zraka: pribl. 3–4 m³/min • Veriga: jeklena 5 x 15 mm po DIN 5684-8 • Upravljanje: dvoročno (gor / dol) • Masa: pribl. 35 kg Stanje: • Rabljeno, tehnično brezhibno. • Popoln komplet s kavljem, upravljalnim ventilom in vrečo za verigo. • Naravni sledovi uporabe – brez mehanskih poškodb. Uporaba: Za dvigovanje orodja, delov in elementov v delavnicah, montažnih linijah, industrijskih obratih in območjih ATEX (odvisno od verzije). Konstrukcija JDN zagotavlja zanesljivost in vzdržljivost – izdelano v Nemčiji, uporabljeno v letalski, petrokemični in avtomobilski industriji. Lasdpfsxtfnwox Al Iob

Stanje: zelo dobro (rabljeno), For sale: Professional positive pressure ventilator TEMPEST DD21, commonly used by fire brigades, industrial plants, paint shops, warehouses, for emergency ventilation, and wherever high airflow performance and reliability are required. The equipment is fully functional, powerful, and ready for operation. Motor and controls are built in EX (explosion-proof / ATEX) version – premium equipment, rarely available on the secondary market. — Technical data: • Brand / model: TEMPEST Power Blower – DD21 • Manufacture: Germany • Year: 1998 • Power supply: 380V / 3-phase (400V) • Controller: CEAG GHG 635 0510  – Ui: 690V  – In: 4.0–6.3 A  – EX version • Motor: VEM motors GmbH – Made in Germany – ATEX  – Power: approx. 2.5–3 kW  – EX Class: EEx e II T3  – Speed: 2850 rpm • Certifications: Lodpfxjxyugpo Al Isab  – AMCA CERTIFIED (certified airflow performance)  – ATEX / EX (explosion-proof) • Robust steel frame with transport rollers • Large, high-performance metal impeller — General condition: Well-maintained, fully functional equipment previously operated in a municipal unit. Normal signs of use, but structurally and technically in very good condition. — Applications: • Fire brigades – positive pressure ventilation • Industrial halls, warehouses, paint shops • Smoke, dust, and vapor extraction • Cooling of machinery and processes • Blowing during maintenance operations

Leto izdelave: 2022, stanje: rabljeno, Gs international 12t Letnik: 2022 Širina: 2,25 m Lajdpfxsy Tltcs Al Ieb Hidravlično nastavljiv Za vas lahko uredimo tudi prevoz.

Stanje: rabljeno, Leto izdelave: 2001, TEHNOLOŠKA LINIJA ZA IZDELAVO STREŠNIH ELEMENTOV Ledpfx Aoyv E Aiel Ioab 1. Profilirni stroj 2. Sistem za izdelavo izolacijskih elementov 3. Sistem za pripravo AL folije 4. Sistem za lepljenje 5. Pomožni elementi, tehnična dokumentacija, certifikati Tipi strešnih plošč, ki se proizvajajo na tehnološki liniji: - strešne plošče modulnih mer 1100mm x 1070mm - strešne plošče polovičnega modula 550 x 1070 mm - strešne plošče brez protikondenznega sloja različnih dolžin (do 6 m)

Stanje: novo, Pressure: 100 Motor: 15 Mounting height: 500 Max. stroke length: 400 Table size: 800 x 600 Ram area: 800 x 600 Table height: 850 Dimensions (LxWxH): 1,300 x 2,000 x 2,750 Approx. weight: 5,500 Oil capacity: 200 Control / Key switch: 1. Set-up mode Manual without light sensor (max. 10mm/sec speed) 2. Automatic (with full speed) with light sensor Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guides: 2 pcs Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110mm/sec – Return 200mm/sec – Pressure: 9mm/sec Mounting height: 500mm Stroke length: 400mm Table plate: 800 x 600 (with T-slots) (custom designs possible) Ram plate: 800 x 600 (with T-slots) Table height: 850mm (floor to top edge of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Laedpom Nntysfx Al Ijb Safety PLC – SICK Light sensors SICK 700 + 150mm Linear scale for setting stroke length 9” PLC display – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) 2x workstation lighting 8 free inputs & outputs on the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable safety Operating manual & parts list (German) With side safety door (doors slide to the rear)

Stanje: novo, Pressure: 100Motor: 11Installation Height: 500Max. Stroke Length: 400Ram Adjustment: 790 x 600Table Height: Floor to Top of Table - 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mmWeight approx.: 5,500Oil Fill: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 bar Control / Key Switch Modes: Setup Mode – Manual, without light curtain Automatic Mode – Full speed with light curtain Hydraulic System: Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 units, Ø 50 x 30 mm Auxiliary Guides: 2 units, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc – 23 l/min, helical gear pump Speeds: Advance: 110 mm/sec Return: 200 mm/sec Pressure Phase: 9 mm/sec Machine Dimensions: Installation height: 500 mm Stroke length: 400 mm Ram plate: 790 x 600 mm (with T-slots) Table plate: 790 x 600 mm (with T-slots) Table height: 850 mm (from floor to top of table) Hydraulic Accessories: Hydraulic control block & components by REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Lodpfx Ajwrkctjl Ieab Air cooler Pre-fill valve Pressure holding valve Control Accessories: Siemens S7-1200 control system Main control cabinet Safety PLC by SICK Safety light curtains by SICK (700 mm) Linear scale for stroke adjustment 10" BEIJER touchscreen (German & English) Movable two-hand control Ethernet interface for remote maintenance Fault indicator with light and audible alarm Dual workspace lighting Side safety doors (can be swung out) Hydraulic proportional valves Dual-channel safety control Operating manual & parts list (German) Complies with current machinery directive EN 693 Oil quantity: 220 liters (tank volume: 250 liters) Total weight: approx. 5,500 kg Dimensions: 1,300 x 2,000 x 2,750 mm Paint finish: RAL 7035 light grey & RAL 7016 anthracite grey

Leto izdelave: 2024, stanje: rabljeno, To ogłoszenie dotyczy zestawu Frozen in Time F100 Automatyczna Liofilizator + Chiller Frigel. Urządzenie jest w pełni sprawne i gotowe do natychmiastowego odbioru. Wyjątkowa okazja nabycia wysokowydajnego, przemysłowego zestawu do liofilizacji, zakupionego jako nowy w czerwcu 2024 roku. Ten kompletny pakiet obejmuje zaawansowany liofilizator Frozen in Time F100 wraz z profesjonalną chłodziarką przemysłową Frigel, chłodzoną powietrzem. System był regularnie serwisowany i jest w doskonałym stanie technicznym. Został zaprojektowany z myślą o niezawodnej, ciągłej produkcji. Obecny właściciel wycofuje się z rynku słodyczy liofilizowanych i koncentruje działalność na innych sektorach, co daje możliwość natychmiastowego zakupu sprzętu bez oczekiwania na realizację zamówienia przez producenta. Co zawiera oferta? - [x] 1 x Frozen in Time F100 - Przemysłowy Automatyczny Liofilizator - [x] 1 x Chiller Frigel - Przemysłowa Chłodziarka Wodna, chłodzona powietrzem - [x] 3 x Kompletne zestawy tac produkcyjnych (pełne wykorzystanie 22-miejscowej konfiguracji) - [x] Oryginalna dokumentacja techniczna: kompletne specyfikacje producenta, rysunki konstrukcyjne oraz instrukcje obsługi Parametry techniczne 1. Frozen in Time F100 Automatyczny Liofilizator Przeznaczony do procesów spożywczych i przemysłowych, zapewnia pełną automatyzację od zamrażania kontaktowego po końcowe suszenie, wszystko w jednym, zaprogramowanym cyklu. - Producent: Frozen in Time - Wydajność suszenia: powyżej 100 kg produktu na cykl 16–24 h (w zależności od rodzaju wsadu) - Kondensator lodu: pojemność 150 kg Lsdpjy Tmrmjfx Al Ioab - Wydajność kondensatora: 130 kg / 24 h - Temperatura kondensatora: -60°C - System rozmrażania: Gorący gaz - Półki i sloty: 13 półek, łącznie 22 miejsca na tace - Całkowita powierzchnia półek: 10,4 m² - Odstęp między półkami: 30 mm - Zakres temperatur w komorze: od -50°C do +90°C - Pompa próżniowa: wysokiej klasy Pfeiffer Duo 65 - Chłodzenie: mocny kompresor 155 m³/h na czynnik R404A - Wymiary (W x S x D): 2,1 m x 1,8 m x 3,6 m 2. Przemysłowy Chiller Wodny Frigel (Seria MRS) Chłodziarka procesowa klasy przemysłowej, o bardzo efektywnej konstrukcji i kompaktowych wymiarach, idealna do ustawienia bezpośrednio przy maszynach przetwórczych. - Producent: Frigel - Kompresor: niezawodny hermetyczny kompresor typu Scroll - Czynnik chłodniczy: ekologiczny R410A - Kondensator: efektywna, w pełni aluminiowa technologia mikrokanaliku; wydajność wymiany ciepła wyższa o 20-40% i masa niższa o 60% w porównaniu do tradycyjnych modeli lamelowych - Parametry pracy: zakres temperatur wody od 0°C do 25°C, praca w wysokich temperaturach otoczenia do 45°C - Serwis: wytrzymała konstrukcja, bardzo łatwa w czyszczeniu myjką ciśnieniową

Stanje: rabljeno, Leto izdelave: 2000, potovalna razdalja osi X: 600 mm, pomik osi Y: 430 mm, pomik po osi Z: 460 mm, MORI SEIKI SV-400 S 4. IN 5. OSJO VERTIKALNI OBRATOVALNI CENTER PROIZVAJALEC: MORI SEIKI, IZDELANO NA JAPONSKEM MODEL: SV-400 LETO: 2000 KRMILJE: MORI FANUC MSC 501 VELIKOST MIZE: 900,0 x 500,0 mm POMIKI (XYZ): X: 600,0 mm Y: 430,0 mm Z: 460,0 mm Laedpfx Alstvau Hj Iob HITROST VRETENA: do 12.000 min⁻¹ VRETENSKI KONUS: BT 40 MENJALNIK ORODIJ (ATC): 30 POSTAJ HITRI POMIK (XYZ): 32.000 mm/min PODAJANJE: 1–16.000 mm/min DODATNO: - NIKKEN enota za 4. in 5. os - RENISHAW merilni sistem - DVOJNI transporter za ostružke - HLADILNI SISTEM

Stanje: novo, Pressing Force: 150 t Motor: 15 kW Installation Height: 500 mm Max. Stroke Length: 400 mm Table Size: 900 x 600 mm Ram Area: 900 x 600 mm Lajdpjwzzzfofx Al Ijb Table Height: 850 mm Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 mm Weight approx.: 8,000 kg Oil Filling: 400 l Hydraulic C-Frame Press General Information: Design: C-frame, hydraulic Pressing Force: 150 t at 240 bar Return Force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Paintwork: RAL 7035 – Light Grey Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total Weight: approx. 8,000 kg Control System: Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor PLC Control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft starter Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke Measurement System: Ruler scale (500 mm) Touchscreen: 9" Siemens, memory for up to 500 tool sets Remote maintenance: Secomea module 8 free I/O ports for external connections (e.g., robot, coil line) Work area lighting (double) Hydraulic System: Main Cylinder: Ø 270 mm Auxiliary Cylinders: 2 x Ø 70 x 40 mm Auxiliary Guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary Motor: 2.2 kW / 3 HP Pump: 45 cc, 65 l/min – REXROTH Auxiliary Pump: present Tank Volume: 500 l Oil Volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, pre-fill valve, hydraulic & mechanical ram lock (top dead center) Pressure & speed adjustable via PLC Mechanical Data: Installation height: 500 mm (distance ram – table top) Stroke length: 400 mm Die depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to table top) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & Electronics: Main control cabinet Pressure & speed adjustment via PLC Swiveling operator panel Mobile two-hand control Light sensors SICK Stroke measurement system Display: 9" Siemens touchscreen Remote maintenance via Secomea module Safety & Operation: Hydraulic proportional valves Dual-channel safety system Lateral safety doors (sliding to the rear) Operating instructions & parts list (German), including maintenance plan

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Popolnoma delujoč in malo uporabljen tračni sušilnik podjetja New eco-tec naprodaj. Po želji je možen tudi z izpiralnikom zraka in silosom 180 m³ za posušene materiale. Naprava je bila do nedavnega v obratovanju in je takoj pripravljena za uporabo. Sistem obsega 2 kontejnerja in ima dolžino traku 24 m, projektirano za toplotno moč 1,5 MW. Tračni sušilnik je v kontejnerjih v celoti izdelan iz nerjavečega jekla. Lasdpfx Aloyr Aiqo Isb Ogled možen po dogovoru.

Stanje: rabljeno, Leto izdelave: 2005, TAKISAWA TC 350M CNC stružniški center Proizvajalec: TAKISAWA, izdelano na Japonskem Model: TC – 350M L5 Krmiljenje: FANUC 21-iTB Leto: 2005 Revolver: 12 postaj Maksimalni premer obdelave: 700,0 mm Največji stružni premer: 460,0 mm Največja stružna dolžina: 510,0 mm Hodi: X-os – 440,0 mm / Z-os – 550,0 mm Obratno število vretena: do 2.500 min⁻¹ Kapaciteta palic: 80,0 mm (potrditi) Ledpfey Eyb Ejx Al Ioab Dodatno: C-os Rezkanje Konjiček Tipalo za nastavljanje orodij Transportni trak za ostružke 10'' 3-čeljustna vpenjalna glava Orodja za revolversko glavo

Stanje: novo, Pressure: 60 Motor: 11 Installation height: 450 mm Max. stroke length: 400 mm Table size: 600 x 500 x 80 mm Ram surface: 600 x 500 x 90 mm Table height: 850 mm Dimensions (L x W x H): 1,300 x 2,000 x 2,700 mm Weight approx.: 4,000 kg Oil fill: 200 L Control / key switch: 1. Setup mode, manual, without light sensor (max. 10 mm/sec speed) 2. Automatic mode (at full speed) with light sensor Main cylinder: Ø 150 mm Auxiliary cylinders: 2 pcs Ø 60 x 40 mm Auxiliary guide: 2 pcs Ø 40 mm Motor: 7.5 kW / 11 hp (IE3) Pump: 18 cc – 26 L / ASC Speed: advance 110 mm/sec – return 120 mm/sec; pressure: 11 mm – 5 mm/sec Installation height: 500 mm Stroke length: 400 mm Table plate: 600 x 500 x 80 mm (with T-slots) Ram plate: 600 x 500 x 90 mm (with T-slots) Table height: 850 mm (floor to top edge of table) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10–60 tonnes) Speed adjustable via PLC Laedpfx Aemmuq Iol Ijb Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC: SICK Light sensors: SICK 700 + 150 mm Linear encoder for stroke length setting 7” PLC display – Siemens (German & English) Mobile two-hand control Ethernet connection for remote maintenance Alarm indicator for malfunctions (visual & audible) Double work area lighting 8 free I/Os on the PLC for external connections The press meets the Machinery Directive Hydraulic proportional valves Dual-channel cable protection Operating instructions & parts list (German) With side safety door (doors can be slid back)