Alrec-Tec Gmbh Oprema Za Odstranjevanje Kovine nakup rabljenega (117.373)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Ponujamo permanentni nadtrakovni magnetski separator znamke Steinert. Separator je sestavljen iz naslednjih elementov: NE-separator, vodila/pokrivala materiala, FE-separator s permanentnim magnetskim bobnom in vibracijsko dozirno korito, SPS krmilna omara. Cena po dogovoru. Stroj je bil vedno shranjen na suhem in zaščitenem prostoru ter si ga je možno kadar koli ogledati. Nlodpfxey Efcbe Ah Ueb

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25-029, skupna širina: 800 mm, skupna dolžina: 4.700 mm, skupna višina: 1.900 mm, vrsta vhodnega toka: trifazni, poraba energije: 2 kWh, Very good metal separator / metal detector for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after an eddy current separator (non-ferrous separator) or as a stand-alone machine. Separates all metals from a grain size of approx. 1 mm. Suitable for applications with metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is ready for immediate operation and can be inspected and tested. Camera option available on request! If the machine is too small, we also manufacture larger models. This is our demonstration machine. The maximum throughput depends on the material and application. Nlodpfx Ahjqabm Ej Ueb Price negotiable!

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 85-70, Samočistilni nadpasovni magnet z ogrodjem. Primeren za širino transportnega traku 1200 mm. Delovna dolžina 1470 mm x delovna širina 645 mm. Nledex Tid Ejpfx Ah Ueb

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna širina: 750 mm, skupna dolžina: 1.300 mm, razmak osovin: 1.300 mm, Nadpasovni magnet. Samočistilen. Primeren za transportne trakove s širino dela 1000 mm. Z ogrodjem. Nljdpox Npqdjfx Ah Ujb

Stanje: novo, Leto izdelave: 2025, skupna širina: 1.200 mm, skupna dolžina: 2.500 mm, skupna višina: 2.080 mm, skupna masa: 3.700 kg, Multi Destroyer je stroj, posebej zasnovan za drobljenje tiskanih vezij (PCB – Printed Circuit Board). Dvojna grednica (dvojna osovina) na vrhu učinkovito razreže PCB-je in jih transportira v granulirnik pod njo. Granulirnik predhodno zdrobljen material pretvori v fine granule, kar omogoča lažjo reciklažo in ponovno uporabo. Dvojna grednica uporablja posebna rezila iz obrabno odpornega jekla, kar zagotavlja maksimalno vzdržljivost in učinkovitost. Dovod materiala je mogoče enostavno nastavljati prek uporabniku prijazne nadzorne plošče. Granulirnik je optimiziran za visoko učinkovitost ter zagotavlja končni izdelek želene velikosti. Nlodpofm E E Ajfx Ah Ujb Multi Destroyer uporablja prekinitveni filter (jet filter) za minimalizacijo nastajanja prahu in s tem zagotavlja čistejše in varnejše delovno okolje. To je še posebej pomembno pri občutljivih reciklažnih postopkih. Multi Destroyer je idealna rešitev za reciklažo tiskanih vezij, saj z visoko zmogljivostjo izpolnjuje industrijske zahteve. Njegova vrhunska inženirska zasnova zagotavlja dolgo življenjsko dobo stroja in visoko odpornost na obrabo.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 4,8 kW (6,53 KM), vrsta goriva: bencin, skupna masa: 550 kg, največja dovoljena obremenitev: 500 kg, dvižna višina: 1.020 mm, stanje verige: 100 odstotek, Leto izdelave: 2025, Oprema: gumene gosenice, hidravlika, nagibni voziček, Mini Crawler Dumper HT500Y-4 Compact Professional Dumper with Lift Function – Now with 10% Promotional Discount The Mini Crawler Dumper HT500Y-4 is the ideal solution for construction, landscaping, agriculture, and jobs in confined spaces. Thanks to rubber tracks, a hydraulic tipper, and powerful lifting capability, this dumper is highly off-road capable, stable, and easy to operate. The machine impresses with its compact design, high payload capacity, and a reliable Briggs & Stratton petrol engine. 🔥 PROMOTION: 10% DISCOUNT ON ALL TRACKED DUMPERS Take advantage of our current sales promotion: 10% discount on all tracked dumper models – only for a limited time and while stocks last! The HT500Y-4 is ready for immediate use and offers a strong combination of performance, maneuverability, and operating comfort. ⚙️ Technical Specifications Engine & Drive Engine: Briggs & Stratton Type: 1-cylinder, OHV, 4-stroke, air-cooled Displacement: 203 cc Power Output: 6.5 HP at 3600 rpm Fuel: Petrol Tank Capacity: 3.6 liters Performance & Capacity Maximum Payload: 500 kg Operating Weight: 550 kg Skip Volume: 200 dm³ Tipping Angle: 100° Tipping System: Hydraulic Dimensions Machine Dimensions without Pedal & Skip: 1570 × 880 × 1450 mm Machine Dimensions with Foot Pedal & Skip: 2050 × 880 × 1450 mm Skip Dimensions: 1050 × 730 × 730 mm Undercarriage Width: 700 mm Lifting & Height Maximum Lift Height: 1020 mm Maximum Discharge Height: 970 mm Tipping Distance: 220 mm Ground Clearance: 110 mm Undercarriage Track Width: 180 mm Track Contact Length: 1000 mm Track Gauge: 520 mm Turning Radius: 1150 mm Speed: 2.88 km/h Gradeability: 20° Rubber tracks for optimal ground traction ✅ Features & Advantages ✔ Removable protective container ✔ Simple operation using control lever ✔ Foldable operator platform for flexible working ✔ Highly compact – ideal for tight construction sites ✔ Excellent stability thanks to tracked undercarriage ✔ Low-maintenance petrol engine ✔ Hydraulic tipping function ✔ Strong lifting function for comfortable unloading Applications Construction & Renovation Landscaping & Horticulture Agriculture Farm & Stable operations Material transport on difficult terrain Working in confined spaces Condition & Delivery Immediately available Brand new / unused, current production Factory-tested, ready for immediate operation Europe-wide delivery by freight forwarding possible 💶 SECURE PRICE ADVANTAGE Nodpoyqxw Ijfx Ah Uolb Net list price: €3,800 Promotional price with 10% discount: €3,420 net plus VAT Save now – better price possible! Take advantage of our attractive promotions. Enquiry worthwhile! Location: Rheda-Wiedenbrück Inspection by appointment possible ➡️ Enquire now and secure 10% promotional discount on tracked dumpers!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 14 kW (19,03 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: oranžna, obratovalna teža: 2.500 kg, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,07 m³, Leto izdelave: 2025, obratovalne ure: 20 h, Oprema: hidravlika, hitroizmenjevalna naprava, jeklene gosenice, kabina, klimatska naprava, nastavljiva roka, nastavljivo podvozje, parkirni grelec, SPECIAL PRICE – CLEARANCE SALE – ONLY 2 UNITS LEFT! HT25 PRO Mini Excavator with 2.5 t operating weight, featuring a durable build for professional use in construction, civil engineering, landscaping, and municipal sectors. ➡️ Special price due to stock clearance / B-grade units ➡️ Technically fully functional, ready for immediate deployment ➡️ Machine with up to 20 operating hours ➡️ Includes hydraulic quick coupler and 3 buckets (25 / 50 / 100 cm) ➡️ Visual imperfections, storage or transport marks possible This machine is robustly equipped and engineered for demanding tasks. The standard steel tracks provide high stability, excellent traction, and long service life even under tough operating conditions. Get in, start, and get to work – the excavator is immediately ready for operation and works flawlessly. FEATURES & ADVANTAGES: • Kubota D1105 diesel engine (original) • 14 kW continuous power / up to 18.4 kW peak • Water-cooled diesel engine • Standard steel tracks Nledpex Hhu Nefx Ah Ujb • Load-sensing hydraulics • Pump capacity 61.6 l/min • Hydraulic pressure up to 25 MPa • Boom swing to the side • Enclosed comfort cab • Heating and air conditioning • Ergonomic joystick controls • LED work lighting • Hydraulic quick coupler • Includes 3 buckets: 25 cm, 50 cm, and 100 cm TECHNICAL DATA: • Operating weight: approx. 2,500 kg • Digging depth: up to 2,370 mm • Dumping height: up to 3,500 mm • Transport width: approx. 1,500 mm • Travel speed: approx. 2–4 km/h • Gradeability: approx. 30° Price €15,000 net plus VAT. Sales Note: Sold as B-grade / clearance item. The machine is technically functional, instantly operational, and comes with a hydraulic quick coupler and a set of 3 buckets (25 / 50 / 100 cm). Visual defects, signs of storage or transport damage may be present. The operating hours do not exceed 20 hours. Location / Delivery 📍 Location: Rheda-Wiedenbrück 🚚 Delivery available throughout Germany and Europe at extra cost 🔧 Viewing by appointment possible Only 2 machines available – while stocks last. Enquire now to secure your special price and start working immediately.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 11,8 kW (16,04 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, poraba goriva na uro: 1,5 l/h, kapaciteta rezervoarja za gorivo: 19 l, barva: oranžna, obratovalna teža: 2.000 kg, dvižna višina: 3.570 mm, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,04 m³, širina izkopne žlice: 485 mm, Leto izdelave: 2026, obratovalne ure: 5 h, Oprema: gumene gosenice, hidravlika, kabina, nastavljiva roka, nastavljivo podvozje, parkirni grelec, Available immediately – Get in and start working right away! 🔥 SPECIAL PRICE UNTIL END OF THE MONTH: ONLY €15,555 net plus VAT 🔥 Are you looking for a reliable, modern and immediately operational mini excavator in the 2.0-ton class? The LT-20 PRO by Tec-Point GmbH impresses with high performance, top-quality craftsmanship and maximum comfort – perfect for construction, landscaping, and municipal works. Thanks to its compact design and advanced load-sensing hydraulics, this machine is ideal for narrow jobsites and powerful enough for demanding earthmoving and foundation work. The enclosed cab with heating makes the LT-20 PRO a true all-season professional machine! ⭐ Your Advantages at a Glance ✅ Side-swing boom – ideal for working in tight spaces ✅ Telescopic track frame 990–1,300 mm – maximum stability ✅ Load-sensing hydraulics – precise and energy-efficient control ✅ Axial piston pump with variable displacement ✅ Travel motors with high/low speed ✅ Double cast counterweights – increased stability ✅ Robust 230 mm rubber tracks – durable and wear-resistant ✅ Hydraulic quick coupler included ⚙️ TECHNICAL DATA Operating weight: 2000 kg Transport weight: 1820 kg Engine: Kubota D902 | 3-cylinder diesel Output: 11.8 kW Max. operating pressure: 23 MPa Bucket volume: 0.04 m³ Digging depth: up to 2,270 mm Digging reach: up to 3,910 mm Travel speed: 2.2 / 4.5 km/h Gradeability: 30° COMFORT & FEATURES ✔ Enclosed comfort cab with heating ✔ Ergonomic joystick controls ✔ LED work lights ✔ Radio ✔ Comfort seat for long shifts ✔ Dozer blade ✔ Hydraulic safety valves ✔ Reinforced steel construction for maximum durability Njdsx Hg D Aspfx Ah Uslb SET INCLUDES: 3 BUCKETS + HYDRAULIC QUICK COUPLER Included in delivery: ✅ 25 cm trenching bucket ✅ 50 cm digging bucket ✅ 100 cm grading bucket ✅ Hydraulic quick coupler ➡️ Ready to go for any jobsite! ➕ AVAILABLE AT EXTRA COST Hydraulic tilt quick coupler Hydraulic auger set up to Ø 300 mm Hydraulic breaker SERVICE & WARRANTY 12 months Europe-wide warranty Spare parts & service directly from our Rheda-Wiedenbrück warehouse IMMEDIATELY AVAILABLE + DELIVERY POSSIBLE Europe-wide delivery available upon request. Location: Rheda-Wiedenbrück Our machines are in stock and ready for immediate operation. You are welcome to view and test all our machines on site. 🔥Only available until the end of the month: LT-20 PRO including hydraulic quick coupler at the special price of €15,555 net🔥 Secure your advantage now – the offer is only valid for a limited time! Contact us now & secure your deal! Demand is high – secure your LT-20 PRO now. ➡️ Contact us directly via Machineseeker or call us – we are happy to advise you personally!

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 4.500 mm, skupna širina: 7.500 mm, skupna dolžina: 1.000 mm, SPECIAL PRICE – Only €5,900 instead of €6,900! Save €1,000 now – limited-time offer. Industrial 4-in-1 Fiber Laser Welding Machine – Model LMH1500 Top performance at a fair price! Our new LMH1500 model with 1500 W Raycus CE-certified laser source offers four integrated functions for professional metalworking: ✅ Key Features: Laser Welding – precise, deep, and with minimal distortion Laser Cutting – ideal for thin sheets up to approx. 4 mm Laser Cleaning – effective against rust, paint, and oxidation Weld Seam Cleaning – leaves a clean seam right after welding 📌 Technical Data: Laser Power: 1500W Raycus (CE-certified) Wavelength: 1080 nm Optical Fiber Cable: 10 meters Cooling: Integrated water cooling Operating Modes: Welding, Cleaning, Cutting, Pulse Voltage: 3×400V / 50–60 Hz Welding Speed: up to 120 mm/s Dimensions (L×W×H): approx. 1000×760×450 mm Weight: approx. 170 kg 📦 Included in Delivery: 1× LMH1500 Laser Welding Machine 1× Handheld Welding Gun incl. Nozzles 1× Automatic Wire Feeder 1× Laser Safety Glasses 1× Operating Manual (German) 1× CE Declaration of Conformity Nledpfow Tfbrjx Ah Ueb 1× Risk Assessment in accordance with Machinery Directive 💼 Fields of Application: For stainless steel, galvanized sheet, aluminum, copper, brass, and much more. Ideal for workshops, mechanical engineering, metal construction, automotive bodywork, or maintenance. 🔒 Certified & Safe: CE certificate incl. risk assessment according to EU directives. Supplied with all necessary documentation. 📍 Manufacturer / Distributor: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück 🚚 Shipping & Invoice: Shipped by freight forwarding (pallet dispatch) within Germany and the EU – shipping costs on request. 🧾 Invoice issued with VAT shown separately. ✅ Buy now and have it delivered ready for immediate use!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 4 kW (5,44 KM), vrsta goriva: dizel, skupna masa: 550 kg, največja dovoljena obremenitev: 500 kg, stanje verige: 100 odstotek, Leto izdelave: 2025, Oprema: gumene gosenice, hidravlika, Secure your offer now: Special Promotion – 10% Discount on All Tracked Dumpers! Take advantage of our current promotion for a limited time only: 10% off all tracked dumper models. The Tracked Dumper 500S is synonymous with powerful material transport, precise unloading, and reliable technology. Thanks to its hydraulic lifting function up to 1,200 mm, it is the ideal solution for direct discharge into containers, trailers or elevated loading areas – efficient, safe, and time-saving. With its compact dimensions, high payload, and robust design, the 500S is perfectly suited for confined construction sites, rough terrain, and continuous professional use. Your Benefits ✅ Hydraulic lift and 90° tip function for convenient unloading ✅ Lifting height up to 1,200 mm – ideal for containers and trailers ✅ Powerful Koop 173 diesel engine, 4.0 kW, EU Stage V ✅ High payload of 500 kg with compact overall size ✅ Optimum traction thanks to wide track undercarriage ✅ Durable, low-maintenance, and robust construction ✅ Ideal for construction, landscaping, municipalities, and agriculture Technical Data Engine: Koop 173 diesel engine Power: 4.0 kW Emissions standard: EU Stage V Performance & Capacity Own weight: 550 kg Payload: 500 kg Skip capacity: 200 dm³ Skip dimensions: 1,050 × 730 × 730 mm Lifting & Tipping Function Maximum lift height: up to 1,200 mm Tipping height: 1,050 mm Tipping range: 220 mm Tipping angle: 90° Operation: hydraulic Undercarriage Undercarriage type: rubber-tracked undercarriage Track width: 180 mm Track ground contact length: 1,000 mm Ground clearance: 110 mm Track gauge: 520 mm Performance Travel speed: up to 4 km/h Gradeability: up to 20° Minimum turning radius: 1,150 mm Dimensions Overall dimensions (L × W × H): 1,570 × 880 × 1,450 mm Undercarriage width: 700 mm Applications The Tracked Dumper 500S excels wherever reliability, maneuverability, and lifting performance are required: - Building & civil engineering Nlodpfx Aoyml D Hoh Ueb - Landscaping & horticulture - Municipal services - Agriculture - Material handling in confined spaces 🔥 CLEARANCE SALE: 10% OFF ALL TRACKED DUMPERS Take advantage of our current special offer: 10% discount on all tracked dumper models – only while supplies last! The Tracked Dumper 500S is available immediately and ready for use. Ideal for anyone seeking a robust, powerful, and compact transport solution for professional applications. Net list price: €3,800 Promotional price with 10% discount: €3,420 net plus VAT. Location: Rheda-Wiedenbrück Contact us now and secure your price advantage! ➡️ Offer valid for a limited time only and while supplies last.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 28.22.0079, Leto izdelave: 2022, obratovalne ure: 6.700 h, skupna masa: 1.870 kg, laserska moč: 700 W, obratovalni tlak: 8 letvica, notranja višina: 365 mm, notranja dolžina: 280 mm, No reserve price – guaranteed sale to the highest bidder! Nlodpjy Rn A Ijfx Ah Ueb The system has been serviced annually by SLM Solutions. Service reports and machine evaluation are available upon request. The package includes the "Material Change Kit SLM280 2.0 complete incl. PSM100" as well as a second set of filter housings, minimizing the effort required when switching between two materials. TECHNICAL DETAILS Laser power: up to 700 W Materials: suitable for all common materials used in the SLM process Temperature range: 20–25 °C Relative humidity: max. 60 % Floor evenness: max. 5 mm/m² Floor load capacity: min. 2,200 kN/m² Floor surface: antistatic, solvent-resistant, liquid-tight, smooth Build Area and Process Data Build volume (L x W x H): 280 x 280 x 365 mm Actual build rate: up to 113 cm³/h Variable layer thickness: 20–90 µm Minimum structure size: 150 µm Laser spot diameter: 80–115 µm Scan speed: max. 10 m/s Laser type: IPG fiber laser Single Laser 700 Watt Media Supply Operating pressure Argon: 7–8 bar Operating pressure Nitrogen: 7–8 bar Operating pressure compressed air: 7–8 bar Operating pressure cooling water: 4 bar Compressed air quality: ISO 8573-1:2010 [1:4:1] Primary circuit flow rate: 1.4 m³/h Cooling water supply temperature min.: 18 °C Cooling water supply temperature max.: 20 °C Cooling medium: Coolflux MACHINE DETAILS Control: SLM MCS Electrical Specifications Connection: CEE 3/N/PE Voltage: 400 ±10 % V Frequency: 50/60 Hz Current consumption: max. 40 A Connected load: 3.5–5.5 kW Heating power: 1,200 W Cooling capacity: 4.6 / 5.8 kW Largest motor: 7.5 kW Dimensions & Weight Dimensions (L x W x H): 2,600 x 1,200 x 2,700 mm Transport weight: 1,870 kg Operating hours: approx. 6,700 h EQUIPMENT Cooling via "Chiller package HRS050 L/W" Sieving station PSM100 V3 Handling device BPH280 and bottle lift (facilitates handling of powder containers and removal of build plates after printing) Material Change Kit SLM280 2.0 complete incl. PSM100 Powder containers Build plates (1.2709 & AlSi10Mg) Additional filter housings Filter elements The system is still in operation and can be inspected by appointment. After the auction ends, the system will be dismantled by the machine manufacturer, loaded on-site, and handed over to the buyer.

Stanje: rabljeno, Leto izdelave: 2023, Condition: used Year of manufacture: 2023 Stock number: 5542 Delivery time: prompt, subject to prior sale Country of origin: Italy Price: €11,600 In stock: 1 Working width: 1300 mm Nlodowiryhepfx Ah Usb Sheet thickness range – mild steel: 150 mm Brush diameter: 150 mm Vacuum area: 250x350 mm Table height: 945 mm Motor: 0.75 kW Length: 1400 mm Width: 1000 mm Height: 1450 mm Weight: 300 kg Demonstration machine / as new condition Net price (New price: €13,600) The Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding, and polishing for different types of materials – stainless steel, steel, copper, brass, and aluminum. The grinding head, equipped with two rotating tools (grinding disc or brush), is mounted on a swivel arm. The Easy T features freely adjustable speed and a vacuum system, allowing workpieces to be securely fixed on the table. It is a cost-effective and efficient solution for conventional grinding and deburring. All edges of the workpiece can be processed from any angle and direction. The grinding head swivels 180°, enabling quick changes of the grinding tool. Features: * Grinding pressure is applied manually * Easy to operate, low cost The flap brush ensures rounding of the workpiece edges. Standard brushes have a diameter of 150 mm. For deburring the product, a support pad with a grinding disc is used. Depending on the height and hardness of the burr, the grinding disc can be adjusted at a slight angle to apply more pressure on the burr. BUYING USED MACHINERY IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum security and full transparency. • HONEST INSIGHTS: Detailed photos & functional videos of the current condition • LIVE CHECK ON SITE: Live testing at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Stanje: rabljeno, Water deaeration (degassing) system for the removal of oxygen from drinking water, predominantly built in 1995. The system operates according to a two-stage cold stripping process with CO2 in countercurrent flow and consists of the following components: - 2 serially connected degassing vessels - Vacuum pump with separator - 7,000 l pressure tank (Gross, 2018) for storing degassed water at up to 4 bar overpressure - Centrifugal pumps - CO2 dosing via needle valve - Pipe manifold, various pipelines, valves, fittings, measuring and control technology Nledpfx Asy Ti Aneh Uob - Control cabinet with Simatic S5 controller Machine (additional info): Cold degassing by CO2 stripping; years built: 1995 – 2018 Capacity: 20,000 l/h Each degassing vessel: 285 l, operating overpressure up to 1 bar Buffer tank volume: 7,060 l, operating overpressure up to 4 bar Residual oxygen content approx.: 0.010 – 0.015 mg/l Operation/control: Simatic S5 Material: Stainless steel Mounting/position: installed on walk-on stainless steel frame Equipment: 2 x degassing vessels, pressure tank, centrifugal pumps, vacuum pump with separator, CO2 dosing (via needle valve), flow, pressure and level measurement, control cabinet, pipe manifold, various pipelines, valves, and fittings.

Leto izdelave: 1900, stanje: rabljeno, Rabljeni stroj A2/35”. Minimalni premer 80 mm, največji 900 mm. Minimalna dolžina hloda 180 cm. Nledpewqmyfefx Ah Ueb Cena velja za stroj v trenutnem stanju. Podajalne verige in verižniki so lahko obnovljeni ali dobavljeni z doplačilom.

Stanje: rabljeno, Komplet pribora za lakiranje iz likvidacije podjetja Likvidacija avtokaroserijske lakirnice z različnimi pripomočki za lakiranje in delavnico. Vidno med drugim: Lakirski kozli Karoserijski kozli Nosilci za odbijače Stojala za lakiranje Barvne kartuše Materiali za lakiranje Delavniški vozički Hidravlični dvigala Drobni deli in pribor Različna držala Pripomočki za lakiranje Lakirna kabina / lakirni sistem ni del ponudbe. Stanje: Rabljeno Nodpey Tyykefx Ah Uelb Cene in artikli na zahtevo.

Stanje: rabljeno, Hladilnik tekočin, hladilna enota, rabljeni stroj Proizvajalec: Hoffmann Tip: ERK 360-H Nsdpoyzywlofx Ah Uolb Skupne dimenzije: Širina: 2200 mm Globina: 1000 mm Višina: 2450 mm Leto izdelave: 1996 Hladilna zmogljivost: 36.000 kcal/h Hladilno sredstvo: R134A – 20 kg Maks. delovni tlak: 17 bar Električni podatki: 400V; 17 kW

Stanje: dober (rabljeno), Leto izdelave: 2008, Proizvajalec: EBG-TECH Tip: BMW N-63 Leto: 2008 Največji premer diska: 300 mm Nledpfof Ecwzox Ah Ueb Skupne dimenzije: 1900 x 1200 x 2900 mm Teža: 1750 kg

Stanje: rabljeno, vrsta vhodnega toka: Klimatska naprava, skupna dolžina: 480 mm, skupna širina: 250 mm, skupna višina: 320 mm, delovna višina: 320 mm, vhodna napetost: 230 V, dolžina mize: 300 mm, širina mize: 250 mm, vhodna frekvenca: 50 Hz, moč: 0,735 kW (1,00 KM), vrsta nastavitve višine: mehanski, Stroj za odstranjevanje srobov za konture, stroj za posnemanje robov s frezo Proizvajalec: Matchling Tip: MCL-300R Malo rabljen Priključek: 230 V Motor: 0,735 kW Obratov: 1000 do 6000 min⁻¹ Posnetje robov: 0–3 mm, brezstopenjsko nastavljivo Vpenjalna izvrtina za rezkar: Ø 10 mm Dimenzije: Dolžina: 480 mm Širina: 250 mm Višina: 320 mm Teža: 32 kg Vključena oprema: 4 kos rezkarjev za posnemanje 45° VHM 1 kos četrtkrožni rezkar R1 VHM 2 kos krogličnih ležajev z osjo 1 kos vodilna letev 1 kos fiksni vodilni zatič z nosilcem Nedpfx Ahoy Szgvo Uolb 2 kos adapterjev (reduktorskih puš) za Ø 6 mm in Ø 8 mm

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 520 mm, CNC-controlled double-head mitre circular saw machine with electronic saw unit swiveling A high-performance circular saw designed for precise and efficient cutting of aluminium profiles, non-ferrous metals, and various plastics. The machine can be used for single cuts—utilizing both saw heads simultaneously to cut the profile—or in automatic mode, where the double-head saw functions as a single-head saw automaton. Electronic mitre adjustment of the saw heads. Mitre angles infinitely programmable between 20° and 135°. Saw blade drive power: 2 x 2.2 kW Saw blade diameter: Ø 520 mm Max. cutting length with both saw heads simultaneously: 4,000 mm or 5,000 mm Max./min. cutting length in automatic mode: unlimited (the profile is pushed and pulled) Length of infeed roller conveyor: 2,300 mm Maximum required floor space: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Weight: approx. 1,500 kg / 1,700 kg - CNC control with touch-screen and color graphics on a movable operator panel - Import and export of CSV / LTE files (for loading cutting lists from an external CAD software) Nedpfx Asy Sty Ish Ujlb - Graphical profile display Optionally equipped with a label printer.

Stanje: rabljeno, Technical details: Saw blade diameter: 420 mm Maximum cutting length: 5000 mm Cutting range (H x W): 180 x 100 mm Required air pressure: 6 bar Mitre cuts on both sides: 45° - 90° (manual) Operating voltage: 380 / 220 V Total power requirement: approx. 8.0 kW Machine weight: on request Machine dimensions (L x W x H): approx. 6.4 x 1.3 x 2.0 m Circular saw with 2x sawing supports for cutting profiles with mitre cuts up to 45°. Microprocessor positioning control BECKHOFF E 70-300 with absolute encoder Digital display Travel distance per sawing support = 2350 mm, motorized Clamping cylinder for each horizontal and vertical axis, manual Spray device Hydropneumatic feed Nledpou Nigwjfx Ah Uob Use of carbide tipped saw blades

Stanje: rabljeno, Leto izdelave: 1994, Tehnični podatki: Premer žaginega lista: 450 mm Število vrtljajev: 2820 min⁻¹ Največja dolžina reza: 5000 mm Najmanjša dolžina reza: 240 mm Potreben zračni tlak: 6-8 bar Premer izvrtine žaginega lista: 32 mm Kot reza v obe smeri: 45+90° Priključek za stisnjen zrak: 6–8 bar Skupna priključna moč: pribl. 4,6 kW Nledpfx Aou Nigkeh Ujb Teža stroja pribl.: 1,1 t Dimenzije stroja (D x Š x V): pribl. 6,05 x 1,49 x 1,79 m Dodatne značilnosti stroja: - Vpenjalna naprava: pnevmatska, vertikalna in horizontalna - Pnevmatska naprava za meglenje - Višinsko nastavljive noge stroja - Materialne podpore pomične skupaj z žago - Dvoročno upravljanje - Števec kosov Premer reza v skladu s tabelo reznim diagramom, saj je odvisen od hitrosti in žaginega lista. Hitrost rezanja pri 2820 obr./min in premeru lista Ø = 66 m/sec. Oprema: - 2 rezervna žagina lista

Leto izdelave: 2003, stanje: rabljeno, Technical details: Nodpju Ngc Nofx Ah Uelb Workpiece length: 130 - 2000 mm Minimum diameter: Ø 10 mm Maximum diameter: Ø 60 mm Control system: Fagor 10/102 S Machine dimensions approx. LxWxH: 3.8 x 3.8 x 1.9 m Control cabinet dimensions LxWxH: 1.2 x 0.6 x 2.2 m Machine weight approx.: 4,500 kg CNC milling and deburring machine for both ends of tubes or round steel. - Material feed via conveyor belt, travel length approx. 3,300 mm - Brush unit type PGAS 8/100 V-HV on both sides/opposed, speed 10,000 rpm (driven by compressed air) - Milling cutter holders, both sides/opposed - Milling spindle and brush holder arranged in sequence - Operation via control panel on the control cabinet Supports: - 2 units: 1x movable, 1x fixed - Lateral adjustment of right support: length 1,725 mm manually - Working strokes: cross = 5-50 mm; longitudinal = 5-50 mm - Working spindle: max. speed 320 rpm.

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €57,900 Leasing rate: €1,094.31 Bestseller 1 Working width: 650 mm Sheet thickness range – structural steel: 0.5 – 170 mm Abrasive belt dimensions: 670 x 2200 mm Extraction capacity: 4,000 m³/h Extraction connection: Ø 120 mm Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Motor: 22 kW Length: 2,600 mm Width: 1,350 mm Height: 2,100 mm Weight: 1,125 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X TOP BRUSH UNIT Machine made of stress-relieved steel-welded construction for a stable and rigid structure. Nodpjwiqukjfx Ah Uslb Worktable with motorized height adjustment via 4 synchronized spindles. Independent drive motors for each working unit. Extraction hoods inside the machine, one per station. Touch screen for: * Automatic star-delta starting of main motors * Analog ammeters for each group * Digital display for sheet thickness with decimal point tolerance * Material thickness setting (+/- 0.1 mm) * Machine status monitoring with alarm messages FEED SYSTEM Robust steel frame, wear-resistant surface. Vacuum conveyor belt available on request. Variable feed speed by frequency inverter: 0.6 to 6.5 m/min. Rubber conveyor belt, oil- and heat-resistant. Automatic conveyor belt centering. Side guides to prevent belt lift-off. Rubber pressure rollers before and after each station, oil- and heat-resistant. Idler rollers on front and rear tables. INCLUDES OPTIONAL TAMPICO BRUSH FOR CONVEYOR BELT CLEANING 1st WORKING UNIT – R Balanced contact roller, anti-oil and heat-resistant nitrile rubber coating. Adjustable via eccentric shaft for working position and compensation for abrasive belt wear. Pneumatic cylinder for automatic positioning and lift-off in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorized adjustment and electronic control of contact roller height. Motor with variable speed and automatic brake in emergency. Pneumatic tensioning system for sanding belt. Abrasive belt centering system with electronic photo sensor. Oscillation adjustment for width and time. Contact roller positioning accuracy mm +/- 0.02 Contact roller positioning speed m/s 10 Contact roller diameter mm 125 Rubber roller hardness Shore 55 Sanding belt speed m/s 3 - 18 Motor power kW 7.5 2nd WORKING UNIT – X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Oscillating lateral movement of the entire group. Quick-change system for brushes. Brush diameter mm 115 Number of brushes pcs 8 Oscillation stroke mm 15 Rotational motor power kW 2.2 Speed rpm 1,000 Oscillation motor power kW 0.37 Brush linear speed m/s 10.0 Optional equipment: B group – external horizontal drum brush Ø 150 mm with Scotch Brite brush €5,150.00 with 0.3 mm wire brush €6,060.00 R GROUP – ABRASIVE BELT Motor 11 kW €740.00 X GROUP – CUP BRUSHES Motor with variable speed 5.5 kW 350/1,100 included OPTIONS: Return to Sender System (machined part output to the front) €1,770.00 Conveyor belt with vacuum system – 3.0 kW €5,150.00

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1. postaja: odstranjevanje robnih srhov pločevine, 2. postaja: odstranjevanje srhov pri izrezih in zunanjih radijih, z VA krtačami; maksimalna debelina pločevine: 5 mm Nlodpfx Ahjy Ugd Es Ujb

Stanje: rabljeno, Leto izdelave: 2012, Max. working width: 1000 mm Processable sheet thickness: 0.5 – 50 mm Rated current: 82 A Rated power: 44.5 kW Protection class: IP 42 Infinitely variable feed speed: 0–4 m/min Sheet thickness adjustment: electric Tool adjustment: electric Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3800 kg Standard Equipment Line consisting of an SBM-M 1000 D2 and an XL-1000, connected by two conveyors: SBM-M 1000 D2: Double-sided slag removal for plasma- and oxyfuel-cut sheets up to 120 mm Significant savings on tool costs due to mechanical slag removal – eliminates the need for time-consuming and costly grinding Double-sided slag removal eliminates the time-intensive flipping or double handling of often very heavy workpieces Up to 60% labor time savings compared to single-sided machines Modular, compact design in modern machine styling – minimal space required Dry processing Nodoy Sp Hdopfx Ah Uolb The cross-processing principle ensures even tool utilization across the entire working width Upper and lower units are separately electrically adjustable and can be individually switched on/off Innovative tool and feed system allows optimal adaptation to warpage and workpiece tolerances Maximum productivity with consistent processing quality Improved working environment – reduced dust, dirt, and noise emissions Optionally available: conveyor systems, handling systems, robotics, automation, processing tools SBM-XL 1000: Deburring and edge rounding of workpieces up to 120 mm Double-sided processing eliminates the need for costly flipping or double handling of heavy workpieces Simultaneous deburring and edge rounding of internal and external contours Dry processing Simple, intuitive operation Processing units are electrically adjustable and individually switchable Maximum productivity with consistent machining quality Cross-processing principle provides optimal tool utilization across the entire working width Fast and easy tool change within a few minutes Modular, compact machine design with a small footprint Improved working environment – reduces dust, dirt, and noise emissions Optionally available: conveyor systems, handling equipment, automation, special solutions For recurring customer requirements, processing parameters can be quickly and easily recalled using predefined programs Up to 60% labor time savings compared to single-sided grinding machines Additional Equipment – Extraction system