Mit Treppe nakup rabljenega (8.695)

Stanje: rabljeno, Dolžina 5000 mm Širina 1150 mm Globina 2000 mm Gre za 2 kota. Mere se nanašajo na en kot. Crjdpoyqvxvofx Aplsb Tehnični podatki so podatki proizvajalca oziroma upravljavca in so zato za nas nezavezujoči. Pridržujemo si pravico do vmesne prodaje; izključno veljajo naši poslovni in prodajni pogoji. O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnih površin, kapaciteta dvigala 70 t več kot 10.000 artiklov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali vaše podjetje, nas kontaktirajte. Dodatne ponudbe najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Vaša ekipa Markus Hirsch

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 15.020 km, moč: 134 kW (182,19 KM), prva registracija: 07/1993, vrsta goriva: dizel, lastna masa: 7.520 kg, konfiguracija osi: 4x4, medosna razdalja: 3.800 mm, naslednji pregled (TÜV): 07/2026, gorivo: dizel, vrsta prenosa: mehanski, vzmetenje: jeklo, Leto izdelave: 1993, Odlično stanje S TÜV Dolžina za nadgradnjo ca. 3,60 m 4x4 pogon na vsa kolesa Listnato vzmetenje Avstrijsko vozilo Originalno le 15.020 km Popolno za predelavo v avtodom Codpfx Apsyzrp Hsljrb

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Crjdpeh R Taqefx Aplsb Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany Crjdpfx Apomhhy Nolsb - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Tilting Spindle Moulder KÖLLE F45 with Power Feed and Integral Fence Very good condition; the machine comes from a small model-making workshop and has only seen light use. Everything functions flawlessly. All bearings and guides are in good shape, and the machine runs extremely smoothly. Year of construction: 1992. The fence features a jaw that can be adjusted in depth with fine adjustment and a scale, allowing for jointing tasks (e.g., when creating a gluing profile). The entire fence can be precisely and rapidly set using a handwheel and leadscrew, with cutting depth displayed on a digital gauge. Includes spindle lock via lever. The control panel is at eye level. Equipped with AIGNER integral fence. Efficient chip extraction possible with two extraction ports (125 mm and 100 mm). Comes with a 30 mm spindle, continuously tiltable from -5° to 45°. Spindle tilt is motorized, with fine adjustment via handwheel and digital gauge. A 40 mm spindle can also be installed. Reversible spindle rotation (clockwise/anticlockwise). Nationwide personal delivery and demonstration in Germany for €220. Shipping to Austria and other EU countries is available on request. Codpfx Apoy Hxtpslerb Large table opening, which can be reduced with various rings—allowing safe operation with both large and small tooling. Speeds: 3,000 / 4,000 / 5,000 / 6,000 / 8,000 / 10,000 rpm. Spindle height adjustment is also electric, with fine adjustment by handwheel and digital readout. Includes extendable auxiliary support (2,200 mm long). Very robust and durable build—designed for heavy-duty milling, suitable for any routing task. Optimal power transmission via V-belt drive. Supplied with manual. Comes with 4-roller power feed HAFFNER, type 904. Feed offers both directions and 4 speeds, with individually mounted feed rollers. The machine table is 1,200 mm wide by 1,000 mm deep, with 500 mm table extensions on both sides. Ready for immediate use. 380 V, 6,000 W and 8,600 W via two speeds; equipped with extra powerful motor. Fitted with all necessary safety features, motor brake and emergency stop. Approved by the Wood Trade Association (Holz-BG) and carries the GS safety mark. Machine weight approx. 1,000 kg. Motor protection switch against overload. Professional-grade equipment—not DIY store quality. Optimal, simple, fast, and safe to operate.

Stanje: zelo dobro (rabljeno), Nizkotemperaturni kotel Viessmann Vitoplex/105kw z oljnim kotlom Crodpowauaxjfx Aplob

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25MythoSarya05, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Crodpfxoykuh Ne Apleb Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2021, obratovalne ure: 10 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S21MythoEasyLow04, Ex-demo machine - like new. MYTHO EASY Low Very low-profile unit Wrapping height: 2400 mm Turntable: 1650 mm LP flat turntable: 30 mm low – 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double roping system – see pictures. Automatic film cutting Optional: film clamp on turntable German Schuko plug 6 individually programmable settings Credpfsx Ta Nxsx Apljb Additional demonstration units available from stock for immediate delivery. Prices ex stock Ludwigsburg.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23NEOS06, Exhibition Unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. 99 individually programmable settings Includes 1 remote control – additional units optional Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film powerstretch: 120–400% Motorized pre-stretch system with infinitely variable adjustment Pre-stretch ratio adjustable via control panel from 120 to 400% Film tension electronically monitored via control unit Quick-loading IEF system for easy film roll change Film specification: max. external diameter Ø300 mm – height: 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series At least 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height: “Machine with MAST (pallet included) 2,150 mm Height detection via photo sensor or direct input on display Safety bar for emergency stop of drive unit Emergency stop switch according to CE regulations Audible warning signal and beacon when machine starts Fall protection for film carriage Push button for start & stop Machine operation according to CE standards Ø22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All functional parameters adjustable via display - Program change lock - Adjustable machine speed around pallet up to 80 m/min Carriage speed up and down independently adjustable - Carriage up speed: 1.3 to 5.4 m/min - Carriage down speed: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 layers) - Number of wraps at pallet top (1–10 layers) - Adjustable pallet wrapping height - Film application tension base & top wraps / ascent & descent independently adjustable - Film pre-stretch base & top wraps / ascent & descent independently adjustable - Ergonomic height for film change Crodoyktv Sjpfx Aplsb ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 savable wrapping programs for SFERA EASY - Cross wrapping (up/down) - Single wrapping (only up or down) - Wrapping cycle with defined start and stop height - Wrapping to a preset height (with photo sensor deactivated) - Wrapping cycle for large-size pallets - Wrapping cycle for top sheet film - Soft start cycle for edge protection application - Wrapping cycle with reinforcement and adjustable number of wraps Soft start for reducing film tears at sharp pallet edges Wrapping cycle with manual or motor stringing (optional) Further machines available from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control Credoykud Rspfx Aplsb

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control Cedpoyktrtsfx Aplorb

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and end of cycle Emergency stop button according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push button for machine power on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program editing F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay for photocell wrapping height F13–F16 – Film application tension at foot & top wraps / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrap (up/down) F01-2 – Simple wrap (only up or only down) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop heights F12 – Wrapping to a predefined height (deactivating the photoelectric height sensor) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via push button Optional features: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Crsdpfeykub Asx Aplsb Installation frame Photoelectric sensor for dark products Film cutting device etc. Additional machines available from stock in Ludwigsburg. Pictures may include optional equipment subject to surcharge. Images similar to actual product.

Leto izdelave: 2026, stanje: novo, Our KVK 1A is an almost identical sister model to the KVK 2 (MA), meaning it is a semi-automatic stretch wrapper with a turntable. In comparison to the KVK 2 MA, it is equipped with a recess that allows for ground-level loading with a manual pallet truck. Codpfx Apjy Drhzelsrb The only operations that must still be performed manually on this wrapper are attaching and cutting the film. Weighing 700 kg, this model is also designed for professional use and has a load capacity of up to 1,500 kg. The 1A features a 1,500 mm turntable and, as standard, can wrap pallets up to 2,400 mm in height. Both turntable and film carriage speeds are adjustable, and the very finely adjustable electromagnetic brake is controlled via potentiometer, allowing you to tailor the automated wrapping process perfectly to your product. Automatic pallet detection via photocell comes as standard, as do adjustable top and bottom wraps. Wrapping programs are available for "up only," "up & down" (cross wrapping), and "weatherproof" modes. The machine can also be operated manually if required. If the wrapper needs to be relocated temporarily, it can be easily lifted and moved by forklift via integrated cutouts. In addition to a photocell for detecting dark packages or black film, the KVK 1A offers an optional variable wrapping height of up to 3,200 mm. Recommendation: The KVK 1A is ideal where ramps cannot be used due to space constraints or when particularly heavy or unstable goods should not be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Leto izdelave: 2026, stanje: novo, Our KVK 1A is an almost identical sister model to the KVK 2 (MA), meaning it is a semi-automatic stretch wrapper with a turntable. In comparison to the KVK 2 MA, it is equipped with a recess that allows for ground-level loading with a manual pallet truck. The only operations that must still be performed manually on this wrapper are attaching and cutting the film. Weighing 700 kg, this model is also designed for professional use and has a load capacity of up to 1,500 kg. The 1A features a 1,500 mm turntable and, as standard, can wrap pallets up to 2,400 mm in height. Both turntable and film carriage speeds are adjustable, and the very finely adjustable electromagnetic brake is controlled via potentiometer, allowing you to tailor the automated wrapping process perfectly to your product. Automatic pallet detection via photocell comes as standard, as do adjustable top and bottom wraps. Wrapping programs are available for "up only," "up & down" (cross wrapping), and "weatherproof" modes. The machine can also be operated manually if required. If the wrapper needs to be relocated temporarily, it can be easily lifted and moved by forklift via integrated cutouts. In addition to a photocell for detecting dark packages or black film, the KVK 1A offers an optional variable wrapping height of up to 3,200 mm. Recommendation: The KVK 1A is ideal where ramps cannot be used due to space constraints or when particularly heavy or unstable goods should not be pushed onto the turntable via a ramp. Crodpfxjy Drfys Aplob For further information, we have attached the technical data sheet as a PDF to this advertisement!

Stanje: novo, Cantilever Racking New, H: 400 cm, Base + 3 Storage Levels with Roof & Rear Wall Delivery: Free delivery within Germany (except islands) Specifications: - Height: approx. 400 cm - Depth: approx. 147 cm - Length: approx. 1,420 cm - Cantilever Arms: approx. 125 cm - Axle spacing: 290 cm (can be customised on request) - New units – made in Germany Crsdpey Izf Rofx Aplob - Delivery time: approx. 6 weeks after clarification of commercial details - Load capacity: 1,000 kg per arm - Load capacity: 4,000 kg per upright - Uprights hot-dip galvanised - Cantilever arms hot-dip galvanised - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 3 storage levels (4 storage levels total) Scope of delivery: - 06 x uprights, incl. base, approx. 400 cm, made from IPE270 - 18 x cantilever arms, approx. 125 cm, made from IPE120 - 06 x roof beams, approx. 150 cm, made from IPE120, with 5° roof pitch - Incl. roof and rear wall material - Incl. all required fastening elements and bolts Why choose BLT cantilever racking? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All specified load capacities for uprights and arms are statically proven at 100% load - All racks supplied hot-dip galvanised. Can be used indoors or outdoors and do not corrode like painted systems. Uniform appearance for many years - We use only legally prescribed hot-dip galvanised bolt sets according to DIN EN 15048-1 - Long-term availability of spare parts - Upright base and rear are welded together for extra safety and faster installation—no need to bolt base to rear - Bracings made from angle steel, eliminating adjustment with turnbuckles and reducing assembly time - No elongated hole system—no weakening of upright profile Price: €12,250.00 net plus statutory VAT You will receive an invoice with VAT shown Assembly: Our trained personnel will gladly assist with professional assembly and dismantling of your workshop equipment if required Our recommendation: Let us know your requirements... We are happy to support you from planning and ordering to installation of your project

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, nosilnost na konzolno roko: 140 kg, višina police: 2.500 mm, skupna dolžina: 3.150 mm, skupna višina: 2.500 mm, razmak osovin: 1.030 mm, nosilnost na stojalo: 1.120 kg, Approx. 3.15 linear meters cantilever racking with shelf panels, 60 cm deep, height: 250 cm, 140 kg/arm, META Multistrong Specifications: - Height: approx. 250 cm - Depth: approx. 81 cm - Length: approx. 315 cm - Cantilever arms: approx. 60 cm - Axial dimension: 103 cm - NEW, available immediately from stock. - 140 kg load capacity per arm - 1120 kg load capacity per upright - Uprights in RAL5010 (gentian blue) - Cantilever arms in RAL5010 (gentian blue) - Arms are hooked in and secured with locking pins - Arm height adjustable in 70 mm increments - Levels: base + 4 storage levels (total of 5 storage levels) The rack consists of: Crjdpfx Apoy Izd Heljb - 4 x uprights, including base, approx. 250 cm, made from IPE120 - 16 x cantilever arms, approx. 60 cm, rectangular profile 40 x 30 mm - 12 x META shelf panels, approx. 100 x 60 cm - Includes all necessary connecting elements and bolts -- Immediately available -- Price: €1,765.00 net €2,100.35 gross You will receive an invoice showing VAT separately. Accessories such as floor anchors, impact protection, etc. can also be purchased from us. Transport: Delivery is provided upon request by our partner freight company; shipping costs depend on your postcode. Assembly: Our trained staff are happy to assist you with the professional assembly and dismantling of your warehouse equipment. Our recommendation: Let us know your requirements... We are happy to help you realize your projects—from planning and ordering to assembly.

Stanje: novo, Leto izdelave: 2026, Recirculation chamber furnace, electric, new unit, delivery time 12 weeks - Temperature: 250°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Volume: 8,820 liters Cedpfxov Hg Euj Aplorb - Control: Eurotherm Nanodac (controller/recorder with color touch display) - 2 circulating air fans - Double doors with safety door sensors - Overtemperature protection: Eurotherm 3216i - 2 fresh air fans - Automatic dampers - Electrical design: 400 V / 50 Hz / 3NPE - Increased heating capacity: approx. 70 kW - Temperature accuracy: +/- 6 K in empty furnace - Documentation, CE declaration of conformity - Electrical wiring diagram with spare parts list Note: The furnace floor is not insulated, but only covered with stainless steel sheet, allowing unobstructed access with any track gauge. Optionally, the floor can be supplied insulated (with entry rails to be defined by the customer). We offer new and used industrial furnaces, which we can also retrofit and customize according to customer requirements. Furnace, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heat cabinet, recirculation oven, chamber oven, preheating oven, chamber recirculation oven, tempering oven, annealing oven.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Generalno obnovljeno, na zalogi, 12-mesečna garancija, brez peči za topila! -maks. temperatura 250 °C -skupni parni prostor 20,5 m³ -uporabne mere (D x Š x V) 2300 x 2750 x 2200 mm -krmiljenje Jumo Imago 500 -grelna moč 36 KW -maks. obremenitev pečnega vozička 6000 kg, električni pogon -električne dovodne in odvodne lopute Belimo -odvodni ventilator krmiljen preko frekvenčnega pretvornika -postavitvena mera (D x Š x V) 3000 x 3000 x 3125 mm + tirnica pred pečjo -lastna teža ca. 3500 kg -prosto stoječa elektro omara dokumentacija električno preverjeno in s trenutnim DGUV merilnim protokolom Ogled v naši skladiščni hali po dogovoru. Crodpfx Aottbf Usplsb Vozičkasta peč, peč, industrijska peč, krožna peč, komorna krožna peč, žarilna peč, toplotna peč, sušilna peč, temperirna peč, komorna peč, sušilna omara, kalilna peč,

Stanje: novo, For sale: ALU plates with certification from surplus stock and remaining inventory. * - Description: ALU / AlMg4.5Mn (5083) with certificate -----2x----- - Aluminium rectangular plate / AlMg4.5Mn (5083) with certificate - Length: 2205 mm - Width: 2504 mm - Height: 60 mm - Weight per plate: 911 kg Cjdpfx Apow Skr Tolerb - Purchase price per plate: €5,374.90 | €5.90/kg * - Sales price per plate: €2,687 / negotiable * -----2x----- - Aluminium rectangular plate / AlMg4.5Mn (5083) with certificate - Length: 2205 mm - Width: 2504 mm - Height: 70 mm - Weight per plate: 1,063 kg - Purchase price per plate: €6,271.70 | €5.90/kg * - Sales price per plate: €2,687 / negotiable * * Prices quoted are net, VAT excluded. * The material comes from surplus stock and remaining quantities and can also be purchased individually. * IMPORTANT: Please note that, for logistical reasons, we currently only sell within Europe. This means that all purchases and transactions are limited to customers within this geographic area. * "The seller excludes any warranty for the purchased goods. The goods are sold as is, without guarantee for fitness for a particular purpose or freedom from defects. The buyer confirms that they have inspected the goods prior to purchase and are satisfied with their condition. The seller accepts no liability for any damages arising from the use of the goods. All claims by the buyer against the seller are excluded." * Status: 14.04.2026 * For questions or further information, I am always at your disposal.

Stanje: nepreverjeno (rabljeno), Volume: Approx. 6000 L Type: Vertical, standing on three legs Tank diameter: 2250 mm Heatable/coolable double jacket Enamelled tank Crsdpshg Nk Defx Aplob

Stanje: nepreverjeno (rabljeno), Volume: approx. 6000 L Type: vertical, supported on three legs Tank diameter: 2250 mm Credshg Niqjpfx Apljb Heatable/coolable double jacket Enamelled tank

Stanje: nepreverjeno (rabljeno), Volume: Approx. 5000 L Type: Vertical, standing on three legs Tank diameter: 2100 mm Crsdpjhg Nlpefx Apleb Heatable/coolable double jacket

Stanje: skoraj kot novo (rabljeno), prva registracija: 12/2023, Leto izdelave: 2023, obratovalne ure: 160 h, Hladilnik za hidravlično olje Zaščita cevi visoke zmogljivosti LED luč na iztegljivem nosilcu Hitri priklop MS01 Serijska oprema stroja: širina 710 mm / 1.100 mm raztegnjena Gumijaste gosenice 180 mm Dvojno delujoča dodatna hidravlika Dve hitrosti vožnje CE-certifikat Crjdpfsx Tn Upjx Aplsb Ta ponudba ni zavezujoča, brez jamstva za podrobnosti o opremi. Pridržujemo si pravico do napak, sprememb in vmesne prodaje!

Stanje: novo, Leto izdelave: 2026, Recirculating chamber furnace, electric, new unit, delivery time 12 weeks - Temperature: 300°C - Internal dimensions (WxDxH): 1500 x 3000 x 2000 mm - External dimensions (WxDxH): 2410 x 3560 x 2730 mm - Volume: 9,000 liters - Control: Eurotherm Nanodac, 100 programs with 25 segments each Another 100 programs can be stored/loaded via FTP or USB flash drive - 2 pcs. circulating air fans - Double door with safety door sensors - Overtemperature protection, Eurotherm 3216i - Controller/recorder with color touchscreen display - Robust steel construction, exterior in anthracite - Motor-driven dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Loading tracks, recess for wheeled loading trolley - Documentation, CE declaration of conformity - Electrical circuit diagram with spare parts list Transportation, installation, and staff training can be offered upon request. Crjdpfx Apolkb Ezsljb This new unit is also available with exhaust air fan and other configurations! Delivery time approx. 10–12 weeks. Contact us! We offer new and used industrial furnaces, which we can also modify and retrofit according to customer requirements. Inspection in our machine hall is possible at any time by appointment. Furnace, ovens, drying oven, industrial oven, drying cabinet, heat oven, heat cabinet, recirculating oven, chamber oven, heating oven, chamber recirculating oven, annealing oven, tempering oven.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Cell with Kuka KR 180 Grinding Robot Codpsg Saqvjfx Apljrb Grinding cell Berger 2012 (External grinding A1) - Total weight approx. 6,300 kg - Cell dimensions: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of manufacture: 2011 - KRC 4 control system - Additional axis (7th axis) Belt grinding station BSS10 - Max. belt dimensions 3500 x 30 mm - Max. contact wheel diameter 200 mm - Motor power 4 kW 2 x polishing stations - Polishing wheel diameter 350 - 600 mm - Power 5.5 kW Gripper exchange cabinet Interoll Automation GmbH belt conveyor - Total length approx. 2000 mm - Belt width approx. 440 mm The price includes a complete concept as shown in the video. We have 4 such cells available. It is possible to manufacture each detail as seen in the video.