Abrollplattform 6,50M X 2,50M ,Sofort Verfügbar nakup rabljenega (64.581)

Stanje: novo, | Menjalna prekucna ploščad za gradbene stroje ali podobno | Nosilnost cca 14 t | 6,50 m x 2,50 m | Lastna teža cca 2000 kg | Novo in takoj na voljo | Pridržujemo si pravico do napak in predhodne prodaje. Fpsdezbuizspfx Abren

Stanje: novo, Leto izdelave: 2026, Product Details Crosscut and Mitre Circular Saws Model ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Fpjdpfx Abecnz Rvjron Precision linear ball bearing guide of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable end stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both left and right sides Left side equipped with scale and stop slider Technical Data Motor: 400 V / 5.0 kW Speed: 2800 rpm Cutting length: 420 mm (at 90°) Cutting height: 200 mm (at 90°) Mitre range, horizontal: 45°-90°-25° Mitre range, vertical: 60°-90°-30° Saw blade Ø: 520 mm (not included as standard) Extraction port: 100 mm Weight: 490 kg Location: Ex stock 54634 Bitburg - Immediately available - We can also supply the saw blade on request.

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Fpjdpeg U Uv Rjfx Abrjn Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, številka stroja/vozila: HMD-G-80-1000, Na voljo imam takoj dostopno, skoraj novo batno-membransko črpalko Abel, tip HMD-G-80-1000, litoželezna izvedba, letnik 2017, pravkar popolnoma obnovljena in na novo prebarvana. Maksimalna zmogljivost: 70 m³/h, maksimalni tlak: 15 bar, motor z močjo 30 kW, popolnoma opremljena z novo krmilno omaro, frekvenčnim pretvornikom in tlačnim senzorjem. Zelo primerna za dolge komorne filtrske stiskalnice 1200 ali 1500. Lokacija: 58762 Altena. Le postavite, priključite in začnite uporabljati… Fpedpfx Ajyxxmgjbron

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with all the features you need to achieve perfect edges right from the start: diamond-tipped jointing cutters ensure that workpieces are excellently prepared for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: Fsdpfxji Am U Dj Abrepn F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application onto the workpiece for edge materials up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change reservoir system including glue drainage device, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination version), robust chain feed, ball bearing mounted double roller top pressure, inspection window from the rear of the machine, extendable workpiece support, feed approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush milling)

Stanje: novo, Leto izdelave: 2025, Description Technical Data Scope of Delivery Accessories Optional Equipment Ideal for demanding craftsmen and joiners The especially long one-piece surfacing tables enable easy planing of workpieces Working tables are made from cast iron, making them resistant and permanently flat Rearward, simultaneously opening surfacing tables with tension spring support ensure quick and convenient retooling Thanks to the fixed-mounted extraction hood, there is no need to switch the extraction hose during changeover, saving valuable working time The helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the thicknesser exit ensures uniform wood outfeed Fpjdpoff Hdpsfx Abrsn Material feed with four speeds Thickness table adjustment via handwheel with integrated height indicator DIGITAL version: with electric thickness table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Prepared for mortising unit Quality made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Joiner/Surfacer Total table length: 2250 mm Max. depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thickness extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Installation Information Required length: 2250 mm Required width/depth: 1440 mm Space requirement explanation: Dimensions account for maximum travel or working lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Working height min.: 3 mm Working height max.: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical Data Connected voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2025, Dimensions and Weights Length approx.: 2000 mm Width/Depth approx.: 1110 mm Weight approx.: 430 kg Jointer Infeed Table Length: 1034 mm Maximum Cutting Depth: 5 mm Dust Extraction Connection Diameter of Thicknessing Extraction Ports: 2 x 120 mm Thickness Planer Minimum Working Height: 3 mm Maximum Working Height: 230 mm Maximum Cutting Depth: 5 mm Electrical Data Main Drive Motor Power: 5 kW Connection Voltage: 400 V Mains Frequency: 50 Hz Cutterblock Type: TERSA Number of Knives: 4 pcs Speed: 5200 rpm Maximum Planing Width: 410 mm Feed Feed Speed: 6 / 12 m/min The TERSA cutterhead system ensures particularly quiet operation. Helically serrated steel infeed roller for consistent and even material feed Material feed with two selectable speeds Numerical digital readout for thickness table height The 2,000 mm long jointer tables allow easy jointing of large workpieces. Worktables are made of cast iron, annealed and stress-relieved, ensuring durability and long-term flatness Robust, large aluminium fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical digital height display The high machine weight provides maximum precision and smooth operation. Powerful industrial motor Sturdy steel/cast-iron construction Feature Details Jointer Fence Sturdy, large jointer fence made of aluminium (1200 x 160 mm) with precise round bar guidance Dust Extraction Hose Connection The extraction ports for jointer and thickness planer are both oriented in the same direction, allowing the extraction hose to be connected to both planing modes from one side of the machine. No need for a hose to run around the machine. Cutterhead Assembly Helically serrated steel infeed rollers for consistent and even material feed Heavy-duty anti-kickback fingers to prevent workpiece kickback 4-knife cutterblock ensures an optimal planed finish Chain Drive Robustly designed chain drive Drive sprockets made of steel Massive cast iron bearing blocks Two Feed Speeds Standard with two feed speeds, conveniently selectable from the machine’s operator side Material Feed Helically serrated steel infeed rollers ensure consistent and even material feeding without indentations Multiple teeth engage at the same time for powerful feeding Maintenance-free compared to rubber feed rollers Thickness Table Adjustment Adjustment via handwheel Fodpshkz E Tjfx Abropn Numerical digital display of planing height Accurate to 1/10 mm Tersa Cutterblock No setting or screwing required Knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Location: Ex stock 54634 Bitburg - immediately available - Subject to prior sale

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, minimax c 26g TERSA – Multi-function combination machine for sawing, milling, planing and thicknessing. The work tables are made from heavily ribbed grey cast iron and the frame is constructed from welded steel, ensuring outstanding torsional rigidity and vibration-free operation. Unique in its class: smooth-running anodised aluminium sliding table with ball contact system. Tilting saw blade from 90° to 45°. Table extension with aluminium crosscut fence for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically-toothed steel infeed roller for constant feed when thickness planing. Radius milling guard for profiling operations, standard with fine adjustment. Milling unit with two speeds. Three independent motors, one for each working unit. Quality Made in Europe. Equipment details Aluminium sliding table With proven ball contact system, used millions of times Dust and dirt-resistant thanks to minimal contact area between ball and trapezoidal rail Permanently smooth-running Saw unit adjustment Manual height and tilt adjustment of the saw unit via handwheel Precise positioning using a scale TERSA planer knife shaft No more setting and screwing Planer knife changes in seconds Self-locking Particularly low-noise Spindle moulder The milling unit features two speeds for flexible tooling options. The machine is equipped with a finely adjustable radius milling guard for profiling. With the aluminium sliding table, tenoning operations are easily possible. Thicknesser With the powerful thicknessing feed, workpieces up to 200 mm height can be planed. The helically toothed infeed roller guarantees consistent material feed. The jointer table folds up space-savingly towards the inside of the machine. Conversion from surface planer to thicknesser is completed within seconds by a single lever. Surface planer Standard with TERSA quick-change planer knife system Large dimensioned planing tables Planing and thicknessing tables made from grey cast iron guarantee maximum smooth running and vibration-free operation. Saw unit Saw tiltable up to 45° With 250 mm diameter saw blade, max. 80 mm cutting height Rip cuts up to 500 mm with parallel fence Table extension With angle scale and aluminium crosscut fence for mitre cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer shaft Anodised aluminium sliding table Mitre fence with flip stop Multi-function fence for rip and surface planing Eccentric clamp arm Model: minimax c 26g TERSA Item no.: 5500027 Cutting length: 1200 mm Cutting width with parallel fence: 500 mm Max. crosscut width left of saw blade: 1200 mm Saw blade tilt: 90 - 45 degrees Max. cutting height at 90°: 80 mm Fpedpfodqzh Tsx Abren Sliding table length: 1140 mm Sliding table width: 201 mm Sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer shaft type: TERSA Planer shaft diameter: 62 mm Number of planer knives: 3 pcs Jointer table width: 260 mm Jointer table length: 1040 mm Saw/jointer fence tilt angle: 90/45 degrees Max. jointer depth of cut: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Min. working height in thicknesser: 3 mm Location: Ex stock 54634 Bitburg - immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Predelava po želji stranke! - Tmax 160°C - Dvižna vrata Fpjdpfx Ajxd A N Tsbren - Notranje dimenzije (D x Š x V): 3300 x 2500 x 1150 mm - Krmilnik JUMO IMAGO - Zračno upravljanje: 6 ventilatorjev, 6000 m³/h na ventilator - Lastna teža: 3000 kg - Priključna moč: 65 kW - Priključek: 400V 50Hz-3/N/PE 100A/faza Peč, peči, industrijska peč, predgrelna peč, sušilna peč, kalilna peč

Stanje: rabljeno, skupna masa: 18.000 kg, lastna masa: 2.724 kg, prostornina tovornega prostora: 39 m³, prva registracija: 10/2024, Roll-off container with Hardox liner | 39 m³ | Unladen weight 2,724 kg | Gross weight 18,000 kg | Errors, input mistakes, and prior sale excepted. Fpedpfx Aeviakpebrjn

Stanje: novo, skupna masa: 14.000 kg, skupna dolžina: 4.500 mm, vzmetenje: drugo, barva: siv, Leto izdelave: 2025, prevoženi kilometri: 10 km, vrsta goriva: bencin, vrsta prenosa: drugo, voznikova kabina: drugo, gradbena višina: 750 mm, emisijski razred: noben, - Hooklift Container 1570 Standard with Swing Tailgate / Drivable over - Hooklift Container Standard - Multiple units available! - Available immediately! - 4.5m x 2.38m x 0.75m - Usable volume approx. 8m³ - Mounting fittings according to DIN 30711-1 (15,000 kg) with rear external rollers and underframe made of INP 180 - External rollers greasable and replaceable - Pickup bar 50mm - Hook height 1570mm - Floor pan made of 5mm St 37.2 (S235JR) - Rounded transition between floor and side wall - Floor plates reinforced with U-steel - Lashing eyes (4.0t) foldable, mounted in the floor - Side walls made of 3mm St 37.2 (S235JR) - Frame profile U80x50mm - Frame spacing 750mm - End profile made of round tube 90mm - Drivable rear swinging tailgate (9t), spring-assisted with lateral safety central lock according to UVV - Continuous tarp and net hooks all around - Access ladder at the front according to UVV, galvanized, bolted - Container primed once inside, double primed and double single-color painted outside - UVV sticker with safety instructions Fsdpfozv Nqhjx Abropn - Container tested and approved according to DGUV regulation - 214-017 - RAL 7016 (grey) - Delivery possible; please inquire about delivery costs and time via email - Subject to error and prior sale! ... VAT deductible, new, very good condition, Consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban)

Stanje: novo, Leto izdelave: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder, and format sliding table made from anodized aluminium Fpodpfx Abjhp Rdlorjn Robust steel and cast iron construction Large support surface and precision-cast table High-precision format sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with aluminium telescopic fence extendable up to 2660 mm with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° - 45° Saw rip fence with fine adjustment Sturdy saw unit and large double trunnion spindle moulder unit ensures maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-free cast iron Three manually adjustable spindle speeds from 3500 - 10000 rpm With forward and reverse spindle rotation Standard arc milling guard Safety reversing aluminium fence jaws Two motors with high power reserves Two removable handwheels for convenient and quick operation Dimensions and Weights Weight approx. 470 kg Dust Extraction Connection Dust extraction port diameter 2 x 120 mm Saw blade guard dust extraction port diameter 60 mm Electrical Data Drive motor power 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Spindle Moulder Spindle tilt 0 – -45 ° Usable spindle length 100 mm Spindle speeds 3500/7000/10000 rpm Max. cutter diameter not retractable 210 mm retractable 180 mm tenoning 275 mm Circular Saw Unit Crosscut length 1600 mm Cut width with rip fence 900 mm Max. crosscut width left of saw blade 2660 mm Saw blade tilt 90–45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade projection 90° 100 mm Max. saw blade projection 45° 78 mm Main saw blade diameter 315 mm Main saw blade diameter explanation independent of scoring unit Main saw blade speed 4000 rpm Sliding Table and Table Table length 1112 mm Table width 430 mm Scope of Delivery: Arc milling guard Anodized aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: delavnici obnovljeno (rabljeno), Rotary Table Polishing Machine from Bula, Model MP81 for sale. Continuously rotating automatic machine for polishing, brushing, grinding, and deburring a wide variety of workpieces. Fpsdpslccvmjfx Abron 6 workpiece holders mounted on a 250 mm pitch circle. 1 processing station, drive power 2.2 kW, equipped with Bula Quick Lock system for polishing discs. Polishing spindle diameter 25 mm. The machine has been completely overhauled: machine body sandblasted, primed, newly painted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled via frequency converters. Subject to prior sale. Optionally, the system can also be supplied with a liquid polishing compound system, consisting of 1 high-pressure dosing gun WIDOBERG HDP-2, bracket, timer, etc., and pressure vessel. WE CAN ALSO OFFER TO REPAIR OR REFURBISH YOUR EXISTING MACHINE OR A BULA MACHINE YOU ACQUIRE THROUGH ANOTHER CHANNEL.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Combination machine 4-in-1 HOLZKRAFT CU 410c F 26 N Tersa -- Technical Specifications -- - Circular Saw - Edging length: 2,600 mm Max. saw blade diameter: 315 mm Max. cutting height at 90°/45°: 100 / 79 mm Max. crosscut width to the left of the saw blade: 2,310 mm Rip capacity at parallel fence: 900 mm Saw blade tilt: 90° - 45° - Planer - Working width: 410 mm Planer table length: 1,660 mm Cutterblock diameter / number of planer knives: 72 mm / 3 pcs - Thicknesser - Table dimensions: 410 x 605 mm Min./max. working height: 3 / 230 mm Max. chip removal: 4 mm Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Max. tenoning tool diameter: 275 mm Max. tool diameter: 210 mm Spindle speed: 3,500 / 6,000 / 10,000 rpm Spindle diameter: 30 mm - General - Fpsdpjd Dtc Tofx Abrjn Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Extraction port diameter (saw blade guard): 60 mm - Special Price - Location: Ex stock 54634 Bitburg

Stanje: rabljeno, prevoženi kilometri: 246.467 km, moč: 140 kW (190,35 KM), prva registracija: 03/2019, vrsta goriva: dizel, lastna masa: 4.780 kg, največja dovoljena obremenitev: 2.710 kg, skupna masa: 7.490 kg, konfiguracija osi: 4x2, gorivo: dizel, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: drugo, število sedežev: 3, skupna dolžina: 6.030 mm, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 500 mm, obratovalne ure: 90 h, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, hidravlika, klimatska naprava, nadzor oprijema, računalnik na krovu, sistem za imobilizacijo, spojka prikolice, tempomat, zapora diferenciala, - vozilo je na voljo takoj - MAN TGL 8.190 BL City, odklopnik - Veljavnost tehničnega pregleda / izpustnih plinov: novo - Kontejner je na voljo kot dodatna možnost, cena od 4900 EUR, plus DDV. - Nadgradnja iz leta 2022 (nosilnost 6000 kg) za mestne kontejnerje, približno 3,5 m do 4,0 m. - Dovoljena skupna masa: 7490 kg - Prazna teža brez kontejnerja: 4900 kg - Nosilnost: 2600 kg - Sistem za pomoč pri ohranjanju voznega pasu - Komforten sedež - Klimatska naprava - Priklopna kljuka 10900 kg - Priklopna glava, nosilnost prikolice: 3500 kg - Zadnja os z vzmetenjem - Nosilnost sprednje osi: 3400 kg, nosilnost zadnje osi: 5200 kg - 2 delovni žarometa - Zadnje steklo - Rešetasta škatla za pritrditev pasov - Hidravlični priključek za nagibni prikolico, na voljo kot dodatna možnost - Barvanje kabine v želeni barvi RAL, vključeno v pavšalno ceno za TGL, na voljo kot dodatna možnost - Pridržana pravica do sprememb in napak! - Več informacij, dodatne slike v visoki ločljivosti, navodila za vožnjo, najdete na naši spletni strani: - Za povpraševanja v angleščini pokličite Fpjdszvy N Iopfx Abron ... Klima, ogrevani sedeži spredaj, DDV je prikazan, ESP, ASR, ABS, radio, krmilni računalnik, tempomat, ogrevani ogledala, električni pomik stekel spredaj, električni centralni zaklep, priklopna kljuka, servo volan, sistem za uravnavanje višine, merilnik vrtljajev, zapora diferenciala, električno nastavljiva ogledala, tahograf, kabina: bližnja, z vzmetenjem, vzmeten sedež voznika, električni pomik stekel, ogrevanje sedežev, delovni žarometa, toplotno zaščiteno steklo, pomožni pogon, zavora prikolice (z 2 vodili), hidravlični sistem za nagib, iz prve roke, razred emisij: Euro 6, dizel, zadnji pogon, HSN 1516, filter trdih delcev, tehnični pregled in pregled izpustnih plinov bosta obnovljena pred prodajo, nalepka za emisije: 4 - zelena

Stanje: novo, Leto izdelave: 2026, Hebrock F 5 Če želite maksimalno zmogljivost, je Hebrock F 5 rešitev za obdelavo robov v zahtevnih delavnicah. F 5 zagotavlja obdelavo robov v vseh korakih, saj je opremljen z vsemi komponentami, ki jih potrebujete za vaše zahteve: rezalnik za utore, krožna žaga, rezalna glava, večradijna glava za obdelavo robov, rezalnik za vogale, ravna glava za obdelavo robov, postaja za čiščenje. Za še večjo prilagodljivost na poti do popolnega zaključka lahko F 5 po želji opremite s praktično večradijno glavo za obdelavo robov. maks. debelina roba: 3 mm maks. debelina obdelovanca: 50 mm Pripravljen za delo v 3,5 min Oprema: Hebrock F5 Next - 10 m/min Stroj za obdelavo robov F5 Next Z nadzorno enoto PLC (vključno s zaslonom na dotik) in z dovajanjem taljenega lepila na obdelovanec za robne materiale do 3 mm; rezalnik za utore (vključno z diamantnim orodjem) do 2 mm globine reza, vzdrževalno nezahteven rezervoar za lepilo z možnostjo namestitve dodatnega rezervoarja, vključno z napravo za doziranje lepila, postaja za krožno žago (približno 12.000 vrt/min), postaja za rezanje (približno 12.000 vrt/min) z ločeno pnevmatsko nastavitvijo reza in menjalnim rezalnikom (kombinirana izvedba), rezalnik za zaobljanje vogalov, večradijna glava za obdelavo robov, ravna glava za obdelavo robov (vključno s pnevmatskim sistemom za izpihovanje), postaja za čiščenje, robusten verižni pogon, dvojni valjčni pritisk z ležaji, pregledno okno na hrbtni strani stroja, izvlečna podpora za obdelovance, napredovanje približno 10 m/min. Fpodpfxei Anado Abren Hebrock F5 F5/08/4 hitra možnost zamenjave rezalnika za vogale F5/08/5 dodatni menjalni motor za rezalnik za vogale z orodjem F5/09/4 večradijna glava za obdelavo robov (R1/R2) F5/10 podvozje F5/14 dodatni menjalni rezervoar F5/24/1 naprava za škropljenje ločilnega sredstva F5/24/2 naprava za škropljenje čistilnega sredstva F5/25 naprava za škropljenje roba F5/27 nastavitev za rezalnik in večradijno glavo za obdelavo robov F6/28 škropljenje teksture F5/30 pnevmatska 3-točkovna nastavitev (obdelava robov z različnimi radii, fazami in ravno) F5/31 spajanje do 50 mm F5/32 LED-osvetlitev Lokacija: Na zalogi, 54634 Bitburg Takoj na voljo – na zalogi.

Stanje: novo, Leto izdelave: 2026, Holzkraft Minimax ST 5es – Maximum Specification for Professional Use Saw-spindle moulder combination with mitre-cutting device and tilting spindle moulder Item No.: 5501086 Ø 350 mm main saw blade with max. cutting height of 118 mm, achievable even with the scorer blade installed Scoring unit with separate motor and Ø 120 mm blade, easy and precise adjustment from outside Saw unit tiltable from 90° to -45° High-precision sliding table made of anodised aluminium Large outrigger table (1200 x 650 mm) With material roller and extendable aluminium telescopic fence up to 3300 mm Tilting spindle moulder from 90° to -45° backwards into the fence Four spindle speeds Spindle with reversible direction of rotation Three independent motors Equipped with lockable main switch and motor protection switch Standard with separate parallel rip fence and jointer fence for edge jointing Equipment Details: Sliding Table with Ball Contact System Made of anodised aluminium Guides of hardened and ground steel, 15% harder than standard steel Twin-trunnion Spindle Moulder Unit Tiltable, made of grey cast iron Mounting points directly to the table for optimal smooth operation Spindle located high on precision ball bearings for lowest bearing load and maximum service life Powerful industrial motors Spindle Moulder Fence Heavy-duty professional version High-quality grey cast iron fence supplied as standard with fine adjustment 3-positioned stops for quick repeatability Fine adjustment via rack and pinion, numeric display and aluminium fence jaws Rip Fence With fine adjustment and quick clamping Stable round bar guide made from ground steel Easily foldable for large workpiece cutting Reversible aluminium fence ruler for narrow workpieces Grey Cast Iron Twin-Trunnion Saw Unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Bearing close to saw blade on both sides Height and angle tilting up to 45° Scoring unit with separate 0.55 kW scorer motor as standard Outrigger with angle-adjustable telescopic crosscut fence with mitre scale Dimensions & Weights Approx. weight 900 kg Dust Extraction Connection Extraction port diameter 3 x 120 mm Extraction port diameter blade guard 80 mm Drive Power Scorer Motor 0.55 kW Main Motors 2 x 5.0 kW Electrical Data Voltage 400 V Sliding Table and Table Sliding table width 360 mm Sliding table height 142 mm Table length 1380 mm Table width 465 mm Fpedpod Hx Hmsfx Abron Spindle Moulder Spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Max. Cutter Diameter lowerable 240 mm Tenoning 320 mm Panel Saw Unit and Scorer Cutting length 3200 mm Cutting width with rip fence 900 mm Max. crosscut width left of blade 3300 mm Saw blade tilt 90 – 45° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2026, Holzkraft panel saw with scoring unit Compact panel saw with tiltable saw blade and high-quality sliding carriage made of anodised aluminium Fodpeih Dwvjfx Abrepn Cutting area of the compact panel saw directly on the rolling table Precision-guided format sliding carriage made of aluminium, anodised as standard Large-area table extension mounted on a telescopic arm, can be shifted longitudinally Standard table extension and table enlargement enable easy handling of larger workpieces Large-dimension cast iron saw assembly, double-mounted to the cast table, ensures maximum stability, precision, smooth operation, and long service life Large work table made of ground cast iron, making it extremely robust and resistant Smooth operation and precise cuts Aluminium sliding carriage With a proven ball contact system deployed millions of times Dust- and dirt-resistant due to minimal contact points between ball and trapezoidal rail 10-year HOLZKRAFT warranty on wear of the hardened guideways Telescopic fence Extendable aluminium telescopic fence Angle-adjustable With two professional folding stops Ek2a0i2ik Rip fence Supplied with fine adjustment and quick release as standard Scope of delivery: Table extension Table enlargement Anodised aluminium panel sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data Table dimensions: 1020 x 325 mm Table height: 900 mm Crosscut length: 1660 mm Max. cutting height at 90° with scorer: 100 mm Max. cutting height at 45° with scorer: 79 mm Max. crosscut width left of saw blade: 1270 mm Cutting width with rip fence: 900 mm Saw blade tilt: 90° - 45° Max. saw blade diameter with scorer: 315 mm Max. saw blade diameter without scorer: 315 mm Scoring blade diameter (option): 80 mm Main saw blade speed: 4000 rpm Scoring blade speed: 7600 rpm Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Extraction outlet diameter: 120 mm Extraction outlet diameter saw guard: 60 mm Weight: 295 kg Location: In stock, 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The robust Junior R1 offers all the features expected from a modern edge sanding machine. A heavy-duty grey cast iron sanding unit with a powerful motor delivers maximum sanding performance. The working table, adjustable in height by spring pressure, allows for optimal belt utilization and safe operation. Optional upgrades include belt oscillation, stepless unit tilting, a veneer sanding device, and an additional table for sanding work on the deflection roller. The machine is supplied with a set of sanding belts; a square and mitre gauge are also included in the delivery. Fpodpfx Abjd R Ev Dsren Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Belt speed: 22 m/sec. • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Extraction port Ø: 100 mm Location: In stock at 54634 Bitburg - free loading - Can be shipped for a fee

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Compact wide belt sander with combination sanding unit Special features: - Activation and deactivation of the sanding pad from the control panel - Activation and deactivation of the roller from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with push-button control Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes grooved steel roller Ø 120 mm for calibration Precision adjustment of working height Clearly arranged control panel at the front Robust, pipe-reinforced monoblock steel frame, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of the working table with digital display Electronically controlled sanding belt oscillation Feed conveyor with gear motor and two speeds Natural rubber feed belt with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each working unit Fpjdpfxogf Sw Ne Abrsn Pneumatic belt tensioning for each unit with decimal correction for grit/thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for small businesses Working width: 950 mm Equipment details Combination unit for calibration and sanding Grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite backing Universal model for calibration and sanding work on solid wood, particleboard, and veneer Technical data Product length approx. 1388 mm | Product height approx. 1668 mm Product width/depth approx. 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V | Current type: AC Phase(s): 3Ph | Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW | Height adjustment motor: 0.25 kW Drive motor power: 7.5 kW Sanding unit Sanding belt length: 1525 mm | Max. sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Minimum workpiece height: 4 mm | Maximum workpiece height: 170 mm

Stanje: novo, A collection of three of the most advanced CNC plasma cutting machines. Thanks to its user-friendly software, the Swift-Cut Pro series ensures precise cutting at the highest speeds with minimal investment. The Swift-Cut Pro range is easy to operate, quick to learn, and excellently supported by outstanding customer service. The Swift-Cut Pro series is the solution for cost-effective in-house metal cutting. Fjdpfx Abjgkgugerjpn You are welcome to arrange a demonstration appointment with us.

Stanje: novo, Leto izdelave: 2024, Holzkraft Edge Sanding Machine Model: KSO 200 F with Veneer Sanding Attachment The sanding unit is tiltable up to 45° via a lever. The machine frame, constructed from welded steel, ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with a separate gear motor for improved sanding results. Oscillation can be optionally switched on or off. Sanding shoe equipped with graphite lining for increased belt life. Height-adjustable sanding table to utilize the full width of the sanding belt. Fedpfx Abslht H Nerepn Height-adjustable auxiliary table with extraction for sanding radii. Spring-loaded belt tensioning automatically compensates for differences in belt length. Equipped with dual extraction ports. Extendable roller table extension. Rubber-coated sanding drum. Veneer edge sanding attachment with contact shoe featuring fine adjustment, pressure relief rollers, and stop rulers. Infeed ruler with grooves for veneer overhangs. Quick changeover from veneer edge to solid wood sanding. Dimensions and Weights Length: approx. 1900 mm Width/Depth: approx. 900 mm Height: approx. 1350 mm Weight: approx. 290 kg Dust Extraction Connection Extraction port diameter: 140 / 100 mm Drive Power Oscillation motor: 0.25 kW Work Table(s) Work table length: 960 mm Work table width: 350 mm Work table height adjustment: 230 mm Min. height: 735 mm Max. height: 965 mm Longitudinal table height adjustment: 230 mm Cross table length: 330 mm Cross table width: 330 mm Cross table min. height: 720 mm Cross table max. height: 900 mm Cross table height adjustment: 180 mm Electrical Data Main drive motor: 3.0 kW Connection voltage: 400 V Sanding Unit Sanding belt length: 3000 mm Sanding belt width: 200 mm Belt speed: 20 m/s Sanding surface length: 1050 mm Sanding surface width: 200 mm Oscillation stroke: 20 mm Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T45 with XPLANE Cutterhead The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control unit allows you to store up to 99 planing dimensions, making height adjustment for planing exceptionally easy—your first workpiece will already fit perfectly. Of course, the thickness table can be moved either by a simple press of a button or incrementally in 0.1 mm steps. The feed rate controls are conveniently within reach. The heavy-duty, vibration-damping composite frame combined with the precision-mounted cutterhead guarantees excellent surface results. Thanks to the sound-insulated construction, even the standard version operates quietly. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg Fedpfx Abeqlck Njropn • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis controller for planing dimensions, up to 99 values storable, 49 freely programmable for custom planing sequences; buttons for manual quick/fine adjustment of planing thickness with digital readout; push-buttons for cutterhead start/stop; built-in operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 helical knife rows (33 curved carbide knives per row); delivery includes full set of knives and a Torx T20 wrench; spindle speed 6,000 rpm included; The emission sound pressure level LpA during machining is reduced by 10 dB(A) • Thickness Table: Electric table adjustment with fine setting, travel speed 10 mm/s, securely mounted on 4 supporting spindles, finely planed table surface • Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during operation; large rubber feed rollers Ø 85 mm for compensation of varying wood thicknesses; rubber rollers are gentle on material and self-cleaning, rollers easily replaceable; segmented infeed pressure bar • Extraction: Pivotable, split extraction hood with chip extraction port Ø 160 mm, optionally connectable left/right (both sides possible in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via grease nipples • Accessories: 1 grease gun pre-filled with long-life grease, 1 oil can, 1 open-ended wrench, 1 tool for knife changing, 1 pair of dummy knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle sound (without extraction) P1 65 Idle sound (with extraction) P1 77 Operating sound (without extraction) P2 65 Operating sound (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle sound (without extraction) 84 Operating sound (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2024, The Uniq series forms the genuine foundation of our product range, incorporating all the features that have earned Kündig’s edge sanding machine its reputation on the market as a robust and versatile precision instrument. A key component of its extremely heavy-duty construction is the motorized oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and motorized tilting capability of up to 45°. All standard edge processing operations can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Ingenious Design – The Sanding Unit The heart of all our edge sanders is the sanding aggregate, which boasts a range of intelligent features and properties. Unlike conventional systems that oscillate by tilting the belt rollers, our machines move the entire sanding unit up and down. Both the oscillation stroke and oscillation range can be easily set at the push of a button. Thanks to flexible settings and the long oscillation path, the sanding belts can be used optimally across their entire width without laborious adjustments to the table height. The oscillation mechanism is driven by a separate motor. Tilting the sanding aggregate is also done conveniently using a rotary switch and its own dedicated motor. The unit can be tilted between 90° and 45°. Thanks to a well-designed swiveling mechanism, full oscillation is available at all times, and double-sided sanding is possible—even simultaneously. Different table heights for the front and rear sanding stations ensure that the belt isn’t used at the same height on both sides. Furthermore, the combination of swiveling mechanism and varying table heights guarantees that the gap between the sanding aggregate and the worktable remains minimal at any tilt angle. Changing the sanding belt is also effortless and takes only seconds. The Four Sanding Stations 1. Sanding Station: “Veneer Side” The front sanding station is designed for precise calibration of materials and functions like a jointer. The infeed fence can be adjusted via a handwheel to set the depth of cut with a precision of tenths of a millimeter. Important: The fence is not tilted. Infeed fence, sanding pad, and outfeed fence are always parallel to each other, effectively preventing rounding of workpieces. Fine adjustment of the sanding pad for grit compensation and for zero positioning between fences and pad is done using a handwheel. The heavy-duty work table on this side is equipped with sliding surfaces. 2. Sanding Station: “Solid Wood Side” This station is ideal for sanding flat, angled, chamfered, or externally radiused workpieces. Here, too, the entire sanding aggregate oscillates. The belt runs the full width over a cool-running graphite surface. A mitre fence is also included on the solid wood side. Included Accessories: Fedpfx Aefig Rwobrepn – Half-round table – Additional table with sanding rollers Location: From stock, 54634 Bitburg – Immediately available –

Stanje: novo, Leto izdelave: 2026, Panhans Bandsaw Machine BSB 800 TECHNICAL DESCRIPTION Robust German engineering Machine frame in an elegant, modern, torsion-free double-chamber steel welded construction Upper and lower doors safeguarded by limit switches Upper and lower precision bandsaw blade guide APA 2, size 2 Finely planed cast iron table Tilting table plate up to 45° Dynamically balanced bandsaw wheels with vulcanized rubber tires Fence rail can be used on the left of the saw blade; fence profile reversible Blade tension indicator 1 piece saw blade 5775 x 30 x 0.8 mm, tooth pitch 9 mm, No. 3780.301 Mechanical height adjustment of saw blade guard via handwheel with locking ratchet Rotary cam switch with star-delta start and emergency stop button Mechanical motor brake with main switch and motor protection relay CE-compliant GS certified Machine frame left-hand version Rotary cam switch with star-delta start and emergency stop button Wheel diameter: 800 mm Blade speed: 1800 m/min Cutting height: 520 mm Cutting width: 780 mm Max. blade length: 5775 mm Min./max. blade width: 15 mm / 40 mm Optionally, with special coating: min./max. blade width: 10 mm / 35 mm Table size: 1145 x 760 mm Table height: 930 mm Extraction ports: 2 x Ø120 mm Motor power: 4 kW / 5.5 HP Voltage: 400 V / 50 Hz Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Fjdpfx Absr Igzcorjpn Net weight: approx. 525 kg Location: In stock, 54634 Bitburg - Immediately available -