Vtičniške Police nakup rabljenega (535)

Stanje: rabljeno, Kakovostni rabljeni širokoračni regali. Zelo primerni za shranjevanje blaga, ki je za običajne regalne police preveliko, brez potrebe po uporabi celotnega paletnega regala. Izdelani iz visokokakovostnega pocinkanega jekla, izjemno močni, enostavni za uporabo in hitro sestavljivi. Set sestavlja: Ijdpfjrfa Sksx Al Njtf 20

Stanje: dober (rabljeno), Included in the scope of delivery: 01x deep support beam, used Material color: RAL 5001 blue Total length: approx. 1,112 mm Internal length: approx. 1,103 mm For frame depth: approx. 1,100 mm Clear support span: approx. 999 mm Profile dimensions: K 50 x 50 x 4 mm Beam support: approx. 53 mm Unit weight: approx. 2.52 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Itedjwwviiepfx Al Nof General information about the item: This item is offered for collection only. If transportation or shipping of this item is required, additional costs will be incurred, which can be obtained separately from us depending on the place of delivery and the scope of delivery.

Stanje: dober (rabljeno), Leto izdelave: 2016, 134 kosov, bočna zaščita / zaščita okvirja / zaščita pred trkom / vodilna ograja za paletne regale, enojne in dvojne vrste, Nedcon - rabljeno - : Cena iz skladišča: 95 € / kos (neto), demontirano, zapakirano in naloženo! Proizvajalec: Nedcon Tip: Set bočne zaščite sigma 135de Letnik: 2016 / 2019 Tip 1 (za enojne vrste): 6 kosov na voljo Bočna zaščita sigma 135° L=1100mm Set bočne zaščite sigma 135deg L=1100 Dolžina: 120cm Višina: 40cm Globina: cca 22cm Teža: cca 31kg Nova cena cca 205 € (neto) / kos Itedpfx Aley Aixus Nef Tip 2 (za dvojne vrste): 124 kosov na voljo Bočna zaščita sigma 135° L=2400mm Set bočne zaščite sigma 135deg L=2400 Dolžina: 243cm Višina: 40cm Globina: cca 22cm Teža: cca 41kg Nova cena cca 227 € (neto) / kos Stanje: dobro – zelo dobro Na voljo: takoj Lokacija: Augsburg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other Ijdpfx Aeh R Taqsl Njtf - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Iodomhhypepfx Al Notf We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth Iedpfjmhh Dhex Al Notf - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Itsdpfx Ajmhh Dzsl Nof - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level. Itjdpefdkb Tofx Al Njf

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time Itedomhh Anspfx Al Njf - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards Itedpfeguk A Hsx Al Njf - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) Iedemhhy Njpfx Al Notf - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard Isdpoguk Dkjfx Al Nstf - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) Iodpfx Asmhh Dtjl Njtf - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) Iodpfx Asguk Dvjl Netf - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 82.200 mm, višina police: 5.000 mm, število vrst polic: 6, višina okvirja: 5.000 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.250 kg, dolžina police: 13.700 mm, dolžina opore: 3.300 mm, 2 enostranske paletne regale + 2 dvostranske paletne regale (8 x M50113313-4) vsak 13,7 m dolžine, 5 m višine, 1,1 m globine, vsak z 4 polji, 3,3 m širokimi, po 3 prečne nivoje, nosilnost police 3250 kg. - 30 okvirjev (RM5011 - RAL5019) - 80 talnih plošč, podložni material, pritrditveni material - 20 distančnikov/povezovalnikov za dvovrstne regale (ZAbh20) - 120 talnih sider (ZZBA1210) - 144 posamičnih prečk (T33135 - RAL2008) - 0 zaščite pred udarci/naletne zaščite (ZRS40901) - 6 tabel nosilnosti (BSMcP) Okviri so vijačeni, niso predhodno sestavljeni Itodpfx Aloyz Ibfj Nsf Prevoz/dostava: - največ 20 delovnih dni po prejemu plačila - dostava do gradbišča/montažnega mesta - razklad s tovornjaka izvaja kupec z lastnim dvižnim vozilom - dostava na celotno ozemlje Zvezne republike Nemčije, razen na otoke! Dostave v države EU se dogovorijo individualno.

Stanje: dober (rabljeno), Okvir: 2750*1100 mm Prečke: 1800*80 mm 2800 kg/polica 2700*100/120 mm 2400-3000 kg/polica Če potrebujete police ali dodatno opremo v drugih sestavah ali izvedbah, nas prosim kontaktirajte. Nudimo obsežen program novih in rabljenih regalov ter dodatne opreme in vam z veseljem pomagamo pri načrtovanju. Iodpfsd Duc Tex Al Notf Dodatna oprema kot na primer: Okvirna, kotna in čelna zaščita, zaščite pred potiskanjem, iverne plošče, rešetkaste police, zadnje mreže, distančniki na voljo. Pošiljanje: Prosimo, povprašajte za stroške prevoza z navedbo vaše poštne številke, kraja in želene količine artiklov. Druge storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah ter cenah, kot tudi do predhodne prodaje!

Stanje: rabljeno, Traverse: 2700x120x50 mm, 63 ks Rámy: 5200x1000x95 mm, 17 ks 4600x1000x90 mm, 4 ks 2300x1000x95 mm, 2 ks Itodpoh Izr Ujfx Al Njf Pokud potřebujete regály nebo příslušenství v jiných sestavách či provedeních, kontaktujte nás prosím. Nabízíme kompletní sortiment nových i použitých regálů a příslušenství a rádi Vám pomůžeme s plánováním. K dispozici další příslušenství jako např.: Ochrana rámu, rohů a nájezdů, zabezpečení proti protlačení, dřevotřískové desky, roštové podlahy, zadní mříže, hloubkové nosníky apod. Doprava: Na požádání Vám rádi sdělíme náklady na dopravu na základě PSČ, místa a požadovaného množství zboží. Další služby: Plánování, montáž/demontáž regálů, výkup/prodej Změny a chyby v technických údajích, informacích a cenách, jakož i mezitímní prodej vyhrazeny!

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 43.500 mm, višina police: 3.500 mm, število vrst polic: 5, prostor za palete: 135 evropske palete, višina okvirja: 3.500 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.000 kg, dolžina police: 8.500 mm, dolžina opore: 2.700 mm, 5 vrstic paletnih regalov (5 x M35112711-2) vsak 8,5 m dolžine, 3,5 m višine, 1,1 m globine, vsak s 3 polji, 2,7 m široko, vsak z 2 prečnimi nivoji, nosilnost police 3.000 kg. - 20 okvirjev (RM3511 - RAL5019) vključene talne plošče, podložni material, vijačni material - 80 talnih sider (ZZBA1210) - 60 posameznih prečk (T27114 - RAL2008) - 5 tabel nosilnosti (BSMcP) Okviri privijačeni, niso predmontirani. Prevoz / Dostava: - največ 20 delovnih dni po prejemu plačila - dostavljeno na gradbišče / kraj montaže - Razklad tovornjaka opravi kupec z lastno dvižno napravo. - Dostave so možne na celoten teritorij Zvezne republike Nemčije; razen otokov! Dostava v države EU po individualnem dogovoru. Ijdpfeyzmkrex Al Njtf

Stanje: skoraj kot novo (rabljeno), 1 komplet vpenjalnih elementov, velikost M20, v premičnem pomožnem omarici, Š x G x V pribl. 0,6 x 0,6 x 1 m Itodpfxsy Awp Io Al Nof vključuje: - 3 zelo stabilne predale - ročno zaklepanje/odklepanje vsake posamezne police

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 53.000 km, moč: 105 kW (142,76 KM), prva registracija: 12/2021, vrsta goriva: dizel, skupna masa: 3.500 kg, konfiguracija osi: 4x2, barva: rdeča, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 3, dolžina tovornega prostora: 3.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 350 mm, Oprema: ABS, airbag, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, računalnik na krovu, registracija tovornjaka, servovolan, tempomat, žerjav, MERCEDES SPRINTER 514 CDI Itsdpfxjxwyqhj Al Njf Letnik 12/2021, približno 51.000 km EURO 6, 140 KM, 6-stopenjski ročni menjalnik, tempomat, klimatska naprava, centralno zaklepanje, električna stekla, električna ogledala, notranjost iz umetnega usnja, voznikov sedež z naslonom za roke, DAB Bluetooth radio, zračna blazina, police za shranjevanje ter druga serijska oprema. Nadgradnja s prekucnikom z notranjimi merami 3,02 x 2,00 m + orodjarna. Opomba: Možnost vgradnje dvigala namesto orodjarne. MASON TRUCKS Via Vicenza, 31 Vedelago (Treviso)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 83.000 km, moč: 102,97 kW (140,00 KM), prva registracija: 12/2021, vrsta goriva: dizel, skupna masa: 3.500 kg, konfiguracija osi: 4x2, gorivo: dizel, barva: rdeča, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 3, število prejšnjih lastnikov: 1, Oprema: ABS, AdBlue, Bluetooth, airbag, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, računalnik na krovu, registracija tovornjaka, servovolan, žerjav, MERCEDES SPRINTER 514 CDI Letnik 12/2021, približno 80.000 km !!! PROMOCIJSKA CENA VELJA DO 30.04.2026 !!! Itedpfx Aloxwy D Io Nof EURO 6, 140 KM, 6-stopenjski ročni menjalnik, tempomat, klimatska naprava, centralno zaklepanje, električna okna, električni ogledali, notranjost iz umetnega usnja, voznikov sedež z naslonom za roke, DAB Bluetooth radio, zračne blazine, police za shranjevanje in druga serijska oprema. Nadgradnja s prekucnikom, notranje mere 3,02 x 2,00 m + škatla za orodje. Opomba: Možnost vgradnje dvigala namesto škatle za orodje. MASON TRUCKS Via Vicenza, 31 Vedelago (Treviso)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, skupna dolžina: 750 mm, skupna širina: 1.800 mm, vrsta hlajenja: zrak, Certificirano po DGUV do: 05/2027, Oprema: osvetlitev, TOP hladilna vitrina Dilara 180 Hladilna vitrina z obtočnim zrakom 4 okrepljene police iz nerjavečega jekla Drsna vrata iz izolacijskega stekla Nastavljiva temperatura od +3 do +15°C Hladilno sredstvo R 290 Le pri nas – preizkušena po DGUV V3 Mere: 1800 x 750 x 2000 mm (ŠxGxV) Priključek: 230V, 1166 vatov Itedpex I U Hhefx Al Nsf Razstavni aparat & preverjen pri SAB Z garancijo + servisom rezervnih delov Možnosti: Vzdrževalna pogodba Dostava Servisni paket Uvajanje & zagon

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost: 13.500 kg, nosilnost na odsek shranjevanja: 1.500 kg, skupna dolžina: 34.000 mm, skupna višina: 4.500 mm, obremenitev na par nosilcev (maks.): 4.500 kg, število vrst polic: 3, višina okvirja: 4.500 mm, prostor za palete: 117 evropske palete, širina okvirja: 1.100 mm, višina police: 4.500 mm, dolžina police: 34.000 mm, dolžina opore: 2.700 mm, TEŽKO (IZJEMNO TEŽKO) NOSILNI REGALI 3 vrste paletnih regalov vsaka 11,3 m dolžine, 4,5 m višine, 1,1 m globine, vsaka ima 4 polja, 2,7 m širine, nosilnost police 4500 kg! nosilnost polja 13500 kg! - 15 okvirjev (RH4511) RAL5019 - 30 talnih plošč, podložni material, vijačni material - 60 talnih sider (ZZBA1210) - 54 posameznih prečk (T27155!) RAL2008 Itsdpfeyy Uniex Al Njf - 3 table z nosilnostjo (BSMcP) Okvirji so privijačeni, niso predhodno sestavljeni Prevoz / Dostava: - največ 26 delovnih dni po prejemu plačila - brezplačna dostava na gradbišče / mesto montaže - razkladanje iz tovornjaka je v pristojnosti kupca z lastno dvižno napravo. - Dostave po celotnem ozemlju Zvezne republike Nemčije, razen otokov! - Dostava v države EU po individualnem dogovoru.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0729389557300, nosilnost na odsek shranjevanja: 160 kg, skupna dolžina: 162.000 mm, skupna višina: 2.500 mm, višina police: 2.500 mm, dolžina police: 162.000 mm, višina okvirja: 2.500 mm, obremenitev na par nosilcev (maks.): 160 kg, širina okvirja: 600 mm, število vrst polic: 23, 11 dvojnih vrst + 1 posamezna vrsta policnega regala, sendzimir pocinkan, vsak s 7,03 m dolžine, 2,5 m višine, 0,6 m globine, vsak s 7 polji s čisto širino 0,97 m. Vsako polje ima 7 polic, nosilnost police je 160 kg. - 184 okvirjev (FR25060) predmontiranih 2500x600 - 1127 polic (FB097604) 970x600x40 - 88 spojkov za dvojne vrste (FBDV-Set) - 22 dvojnih križnih vez (VK2510) - 23 oznak za nosilnost (BSMcP) Okvirji so predmontirani. Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila Iodpfoyy I Enex Al Notf - dostava na gradbišče / mesto montaže - raztovarjanje s tovornjaka opravi kupec z lastno dvižno napravo - dobava po celotnem območju Republike Nemčije, razen otokov! Dostava v države EU po individualnem dogovoru.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0729389557300, nosilnost na odsek shranjevanja: 160 kg, skupna dolžina: 192.000 mm, skupna višina: 2.000 mm, višina police: 2.000 mm, dolžina police: 192.000 mm, višina okvirja: 2.000 mm, obremenitev na par nosilcev (maks.): 160 kg, širina okvirja: 600 mm, število vrst polic: 32, 16 dvojnih vrst policnega regala, sendzimir pocinkano, vsaka dolžine 6,03 m, višine 2 m, globine 0,6 m, vsaka s 6 polji, neto širina polja 0,97 m, vsako polje s 6 policami, nosilnost police 160 kg. Itjdpjyyvq Sefx Al Njf - 224 okvirjev (FR20060), predmontiranih 2000x600 - 1152 polic (FB097604) 970x600x40 - 96 povezav za dvojne vrste (FBDV-Set) - 32 dvojnih križev (VK2010) - 32 oznak za nosilnost (BSMcP) Okvirji predmontirani. Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - dobava prosto gradbišče / montažno mesto - razklad tovornjaka s strani kupca z lastno dvižno napravo - dobava po celotnem območju Zvezne republike Nemčije, razen otokov! Dobave v državah EU po individualnem dogovoru.