Sistem Mast Uri nakup rabljenega (15.576)

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Parts cleaning system / spray cleaning system type CM13 2-tank (washing + rinsing) including air knife blow-off Basket diameter: 1,300 mm (octagonal) Maximum load weight: up to 1,000 kg Loading and unloading of the basket is performed by the operator using a supply trolley parked/positioned in front of the system (decouplable / mobile). Usable height: 800 mm Washing tank: volume: 430 liters, spray pressure: 6.0 bar Rinsing tank: volume: 280 liters, spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following equipment: + automatic water top-up for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be switched as required) for small components (= E-Spray System) + side channel blower with height-adjustable airknife system (blow-off drying) + steam/fume extraction incl. condensate return + weekly timer for electric heating Dcjdpfxov Tm Ayo Ac Noh + prepared for optional oil separator retrofit + medium filtration via bag filter (manufacturer: Eaton, Topline) in both circuits (washing and rinsing) + outer cladding with stainless steel sheet + entire system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return circuit + stainless steel circulation pumps incl. mechanical seal and soft starter The system is displayed at the Glogar Technology Center and is used exclusively for washing trials.

Leto izdelave: 2007, stanje: rabljeno, Dimenzije D x Š x V: 1.900 x 2.131 x 3.023 mm Teža stroja približno 2.200 kg Po naši oceni je stroj za varjenje s grelnimi elementi v dobrem rabljenem stanju. Tehnične značilnosti: Stisnjen zrak: - Najvišji delovni tlak: 6 bar Dcsdpfx Aszbvnxjc Nsh - Poraba stisnjenega zraka: 0,2 Nm³/cikel pri 5 bar Grelnik: - 2 x 12 grelnih patron WALTOW, Ø12,5 x 400 mm, 1000 W, 230 V - 2 x termoelement tip PT100 - Čas segrevanja na 350°: cca 50 minut Vakuumska črpalka: - Vakuumska črpalka BECKER, tip VT 4.16, 550 W Pribor, prikazana orodja in vpenjala so priložena le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do vmesne prodaje!

Leto izdelave: 2023, stanje: rabljeno, Krmiljenje Siemens Napetost: 400V 50 Hz Tok: 63 A Po naši oceni je robotska varilna naprava v skoraj novem stanju. Tehnične lastnosti: - MIG varjenje posameznih delov na hladilni plošči z robotom - Samodejno čiščenje gorilnika in krajšanje žice - Vrtljiva miza z dvema postajama za nalaganje med varjenjem - Krmiljenje Siemens Pribor, prikazana orodja in pritrdilna sredstva niso vključeni v obseg dobave, razen če je to navedeno v dodatnih informacijah. Dcjdpezbvnfefx Ac Noh Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje!

Stanje: rabljeno, Leto izdelave: 2008, Maks. teža na obesitveno točko: 44 kg Transportna tehnika (krmiljena s frekvenco): 0,6–2,0 m/min Djdszbvlwepfx Ac Nsch Skupna dolžina verige: cca 40.500 mm Razmak členov verige: 270 mm Po naši oceni je lakirna naprava v dobrem rabljenem stanju. Dodatna oprema, prikazano orodje in vpenjala so vključeni le, če je to navedeno v dodatnih informacijah. Spremembe in napake v tehničnih podatkih in informacijah ter vmesna prodaja pridržane!

Stanje: rabljeno, Leto izdelave: 2019, Ogrevalna moč: 12 kW Temperaturno območje: 30 - 90 °C Dedpfxezbvhfe Ac Nech Mere (dolžina/širina/višina): 1.300 x 700 x 600 mm Največja polnilna teža mrežaste škatle: 800 kg Obratovalne ure: pribl. 100 h Dimenzije D x Š x V: 1,5 x 1,5 x 1,5 m Teža: 500 kg Po naši oceni je stroj v dobrem rabljenem stanju in ga je mogoče po predhodnem dogovoru pregledati pod napetostjo. Dodatna oprema, prikazana orodja in vpenjalni elementi so vključeni le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih in informacijah ter vmesne prodaje!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 40 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Naprodaj je popolnoma opremljen 3D skener Keyence VL770 z velikim vrtljivim krožnikom, programsko opremo za obratni inženiring in programsko opremo za merjenje GD&T. Dsdpfx Acezab Rve Njch Za informacije pokličite +36302632132.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, nosilnost: 1.400 kg, Glaslift KS Robot 1400 Leto izdelave: 2016 Širina: 1310 mm Dolžina: 3350 mm Višina: 1700 mm Največja nosilnost: 1400 kg z daljinskim radijskim upravljanjem Dcsdpjyir Azefx Ac Njh DGUV pregled do julija 2025 Ponudba je namenjena izključno podjetnikom v smislu §14 BGB.

Stanje: rabljeno, Novo: Ne Splošno stanje: zelo dobro Tehnično stanje: zelo dobro Videz: zelo dobro Država proizvodnje: CH Za več informacij se obrnite na podjetje Vink Machinery. Dcodsx Aiy Njpfx Ac Noh Menzi Muck cilindri * Dvostranskega delovanja * Opremljen z dvema nepovratnima ventiloma * Premer cilindra: 60 mm * Oko cilindra: 50 mm notranji premer * Razmak osi v izvlečenem položaju: 1070 mm * Razmak osi v zaprtem položaju: 700 mm * Cena na kos!

Stanje: rabljeno, The plant is suitable for the agglomeration of thermoplastic films and fibers. Depending on the material, the throughput ranges between 500 kg and 1,000 kg/h. The plant consists of: • Feed conveyor belt • Load-dependent control system for the feed belt • Metal detector coil • HERBOLD cutting mill, type SMS 45/100-H5-3 • Pneumatic material transport to the buffer silo • Plastcompactor unit HV-70, which comprises buffer silo feed screw, plastcompactor, central blower, and cooling circuit • HERBOLD secondary cutting mill, type SML 45/100-S4-2 • Intensive cooling system • SZS II 630/200 conveying blower Dcodpfx Acsy Timmo Noh • Screening machine • Fines recirculation to the compactor silo • Material conveyor type MFT with Big Bag station and automatic diverter valve to on-site silo • Automatic exhaust air filter • Electrical control system • Compressor.

Stanje: dober (rabljeno), Leto izdelave: 2014, obratovalne ure: 441 h, vrsta goriva: električni, Drivetrain Drive: Wheel Weights Unladen weight: 2,735 kg Functional Mast: Articulating boom Lifting capacity: 200 kg Working height: 1,000 cm Dcsdpsy T Uylofx Ac Nsh CE marking: yes Maintenance, History, and Condition Number of owners: 1 Technical condition: good Visual condition: good Further Information Max. horizontal outreach: 3.00 m Transport dimensions (L x W x H): 2.7 / 1 / 1.99 m Further Information Please contact Tobias Mayr for more information. Haulotte 10m Mast Boom Lift Compact dimensions and high maneuverability are the advantages of telescopic mast lifts. The Haulotte Star 10 concept has proven itself, especially for indoor applications with limited setup space and narrow passageways, where its compact design offers clear advantages. With the articulated arm, a lateral reach of up to 3 m is possible, and the machine can be driven even when fully extended. Standard features include practical tool trays, hour meter, non-marking tires, and fully automatic chargers. Manufacturer: Haulotte Model: Star 10 Year of manufacture: 2014 Recorded operating hours: 441 hours Net weight approx.: 2,735 kg Working height approx.: 10 m Platform height: 8 m Load capacity: 200 kg Charger built-in Climbing ability: 23 % Transport dimensions (L/W/H): 2.70 m / 1.00 m / 2.00 m UVV inspection can be renewed on request. Other information: Affordable delivery EU-wide possible. Viewing appointments required. We gladly accept your machines/construction equipment as trade-ins. Individual financing or leasing options available (for businesses only). Contact us for any questions. All prices ex location 86684 Holzheim. All information subject to change. Errors, transmission mistakes, and prior sale reserved. All details regarding color, equipment, condition, features, etc. of the vehicles offered are without guarantee. Subject to errors, typographical mistakes, or prior sale.

Stanje: rabljeno, Leto izdelave: 2010, x-axis travel: 450 mm y-axis travel: 400 mm z-axis travel: 320 mm Tool holder: HSK 63 Spindle speeds: 0 - 10,000 rpm Rapid traverse: 30 m/min Control: GE FANUC Series 16 i Dcjdpfx Acotqqqms Neh System for the machining of fittings, valve bodies, couplings, and similar components. Comprising: 1 used flexible manufacturing cell (transfer machine) by RIELLO, model VERTIFLEX VFX 450-2/1-0/1-V, year 2010, with 2 three-axis machining modules, each equipped with an 8-position tool turret. Travel ranges for Module 1: X1/Y1/Z1 = 450/400/320 mm Travel ranges for Module 2: X2/Y2/Z2 = 450/400/320 mm Tool holder for each module: HSK 63 Rotary table with two integrated workpiece holders diameter 400 mm each (B-axis for each workpiece holder: 360 x 1°), through-spindle coolant Accessories: chip conveyor, coolant system Connected by ABB handling robot with 1 used flexible manufacturing cell (transfer machine) by RIELLO, model VERTIFLEX VFX 450-2/2-0/1-V, year 2003, with 3 three-axis machining modules, each equipped with an 8-position tool turret. Travel ranges for Module 1: X1/Y1/Z1 = 450/400/320 mm Travel ranges for Module 2: X2/Y2/Z2 = 450/400/320 mm Travel ranges for Module 3: X3/Y3/Z3 = 450/400/320 mm Tool holder for each module: HSK 63 Rotary table with two integrated workpiece holders diameter 400 mm each (B-axis for each workpiece holder: 360 x 1°), through-spindle coolant Accessories: chip conveyor, coolant system youtu.be/vo4ZI_dvEZk

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 120 h, Funkcionalnost: omejena funkcionalnost, For sale is a high-quality KEYENCE VHX-7000 digital microscope – a fully integrated system ideal for material analysis, defect analysis, quality control, research, and industrial inspection. The VHX-7000 combines ultra-high-resolution 4K imaging with intuitive operation and advanced measurement features, including automatic focus stacking, image stitching, 2D/3D measurements, and multi-angle observation. As one of the world’s first digital 4K ultra-high-precision microscopes, this system delivers exceptional, SEM-level image quality while offering the speed and user-friendliness of optical microscopy. Included configuration: Main System: Dedpfx Acjy U Iy Ij Noch KEYENCE VHX-7000 Controller Unit Camera: KEYENCE VHX-7020 High-Performance Camera Optics & Adapters: KEYENCE VH-Z20T Zoom Lens / Objective (20x–200x) KEYENCE VH-K20 360° Multi-Function Side View Adapter KEYENCE VHX-20T Stand Adapter Mechanical Components: KEYENCE VHX-S750E Motorized XYZ Stage (40 mm) Software & Accessories: KEYENCE VH-H5M 3D Measurement Software KEYENCE VHX-A70D Control Console for the VHX-7000 Swiss Power Cable/Adapter Original Manuals Key Features: 4K Ultra HD Imaging Seamless magnification from 20x to 6000x Fully motorized operation Multi-directional illumination Real-time 3D and surface roughness analysis Automated focusing and positioning User-friendly touchscreen operation Ideal for industrial inspection, electronics, materials science, metallurgy, and R&D laboratories.

Stanje: dober (rabljeno), Leto izdelave: 1995, Dvižni sistem, Kardex, dimenzija police: 1250x825 mm, višina 7 m – rabljeno - : Cena na lokaciji: 13.950 € (neto), demontirano, zapakirano in naloženo, dodatno prevoz in ponovna montaža! Proizvajalec: Bellheimer / Kardex Tip: Shuttle 1250x825x10000 Številka naprave: 95.008812/001 Dcedpfx Acjyrqvfe Nsh Leto izdelave: 1995 Dimenzija police: 1250x825 mm Višina naprave: pribl. 7 m Globina: pribl. 2,70 m Širina: pribl. 1,6 m Število polic: 44 kosov Dovoljena skupna nosilnost: 2x10.000 kg Dovoljena nosilnost police: 250 kg 3x400V, A: 3x5,2, KW 3,6 Stanje: rabljeno Na voljo: od pribl. 13. tedna 2026 Lokacija: Speyer

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta prenosa: hidrostat, vrsta goriva: dizel, barva: rumena, skupna masa: 8.200 kg, lastna masa: 5.200 kg, dvižna višina: 4.450 mm, stanje pnevmatik: 100 odstotek, tip droga: teleskopski, Leto izdelave: 2022, obratovalne ure: 3.158 h, skupna dolžina: 3.200 mm, skupna širina: 1.300 mm, skupna višina: 2.200 mm, velikost sprednje pnevmatike: 27X10-12, velikost zadnje pnevmatike: 23X9-10, težišče tovora: 600 mm, gradbena višina: 2.200 mm, dolžina vilic: 1.500 mm, širina nosilnega okvirja vilic: 1.100 mm, nosilnost: 3.000 kg, proizvajalec motorjev: KOHLER, Tip prednje pnevmatike: polne pnevmatike (črne), tip zadnje pnevmatike: polne pnevmatike (črne), debelina vilic: 50 mm, širina vilic: 100 mm, Oprema: bočni pomik, kabina, nastavljiva roka, osvetlitev, podaljšek vilic, vilice za palete, ## 🚜 JCB TLT30D – 2022 – 3158 MTH – DIESEL – MÂT TÉLESCOPIQUE 4450 mm – DÉPLACEMENT LATÉRAL DES FOURCHES – ENTIÈREMENT RÉVISÉ – PNEUS NEUFS – ÉTAT 5/5 ### ✔ Chariots élévateurs neufs et d’occasion avec garantie de qualité – FT LOGISTICS Prêt à l’emploi. Sans compromis. Ce JCB TLT30D n’est pas qu’une machine – c’est l’assurance que vos opérations logistiques se dérouleront de manière fluide, fiable et sans interruption. Conçu pour les conditions de travail exigeantes, après une révision technique et esthétique complète, ce chariot se présente comme neuf et est prêt à être utilisé immédiatement. --- ### 🔧 Spécifications techniques principales 📅 Année de fabrication : 2022 ⏱ Heures de service : 3158 MTH ⛽ Moteur : DIESEL 🏋️ Capacité : 3000 kg 🔩 Mât : télescopique – 4450 mm 📏 Déplacement latéral des fourches : 1100 mm 📦 Longueur des fourches : 1500 mm 🛞 Pneus : super-élastiques (100 %) Dcsdpfxozbr Uuo Ac Noh ✔ État technique : 5/5 – révisé en profondeur, prêt à fonctionner ✨ État visuel : reconditionné, sans corrosion, comme neuf 📐 Hauteur : 2200 mm 📐 Longueur : 3200 mm 📐 Largeur : 1300 mm 📐 Hauteur hors tout : 2200 mm 🛞 Pneus : Avant 27x10-12 Arrière 23x9-10 🚪 Cabine complète chauffée ⚖ Poids de la machine : 5200 kg 📦 Capacité : 3000 kg 📍 Centre de gravité de charge : 600 mm --- ### 🏢 FT LOGISTICS La qualité sur laquelle nous nous engageons. Un service de confiance.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 3.158 h, nosilnost: 3.000 kg, dvižna višina: 4.450 mm, težišče tovora: 600 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 2.200 mm, proizvajalec motorjev: KOHLER, vrsta prenosa: hidrostat, širina nosilnega okvirja vilic: 1.100 mm, dolžina vilic: 1.500 mm, širina vilic: 100 mm, debelina vilic: 50 mm, stanje pnevmatik: 100 odstotek, Tip prednje pnevmatike: polne pnevmatike (črne), velikost sprednje pnevmatike: 27X10-12, tip zadnje pnevmatike: polne pnevmatike (črne), velikost zadnje pnevmatike: 23X9-10, skupna masa: 8.200 kg, lastna masa: 5.200 kg, skupna višina: 2.200 mm, skupna dolžina: 3.200 mm, skupna širina: 1.300 mm, barva: rumena, Oprema: bočni pomik, kabina, nastavljiva roka, osvetlitev, podaljšek vilic, vilice za palete, ## 🚜 JCB TLT30D – 2022 – 3158 MTH – DIESEL – MÂT TÉLESCOPIQUE 4450 mm – DÉPLACEMENT LATÉRAL DES FOURCHES – ENTIÈREMENT RÉVISÉ – PNEUS NEUFS – ÉTAT 5/5 ### ✔ Chariots élévateurs neufs et d’occasion avec garantie de qualité – FT LOGISTICS Prêt à l’emploi. Sans compromis. Ce JCB TLT30D n’est pas qu’une machine – c’est l’assurance que vos opérations logistiques se dérouleront de manière fluide, fiable et sans interruption. Conçu pour les conditions de travail exigeantes, après une révision technique et esthétique complète, ce chariot se présente comme neuf et est prêt à être utilisé immédiatement. --- ### 🔧 Spécifications techniques principales 📅 Année de fabrication : 2022 ⏱ Heures de service : 3158 MTH ⛽ Moteur : DIESEL 🏋️ Capacité : 3000 kg 🔩 Mât : télescopique – 4450 mm 📏 Déplacement latéral des fourches : 1100 mm 📦 Longueur des fourches : 1500 mm 🛞 Pneus : super-élastiques (100 %) ✔ État technique : 5/5 – révisé en profondeur, prêt à fonctionner ✨ État visuel : reconditionné, sans corrosion, comme neuf Dcodozbr Tdopfx Ac Noh 📐 Hauteur : 2200 mm 📐 Longueur : 3200 mm 📐 Largeur : 1300 mm 📐 Hauteur hors tout : 2200 mm 🛞 Pneus : Avant 27x10-12 Arrière 23x9-10 🚪 Cabine complète chauffée ⚖ Poids de la machine : 5200 kg 📦 Capacité : 3000 kg 📍 Centre de gravité de charge : 600 mm --- ### 🏢 FT LOGISTICS La qualité sur laquelle nous nous engageons. Un service de confiance.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 3.446 h, nosilnost: 3.000 kg, dvižna višina: 4.450 mm, težišče tovora: 600 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 2.200 mm, proizvajalec motorjev: KOHLER, vrsta prenosa: hidrostat, širina nosilnega okvirja vilic: 1.100 mm, dolžina vilic: 1.500 mm, širina vilic: 100 mm, debelina vilic: 50 mm, stanje pnevmatik: 100 odstotek, Tip prednje pnevmatike: polne pnevmatike (črne), velikost sprednje pnevmatike: 27X10-12, tip zadnje pnevmatike: polne pnevmatike (črne), velikost zadnje pnevmatike: 23X9-10, skupna masa: 8.200 kg, lastna masa: 5.200 kg, skupna višina: 2.200 mm, skupna dolžina: 3.200 mm, skupna širina: 1.300 mm, barva: rumena, Oprema: bočni pomik, kabina, nastavljiva roka, osvetlitev, podaljšek vilic, vilice za palete, ## 🚜 JCB TLT30D – 2022 – 3446 MTH – DIESEL – MASZT TELESKOPOWY 4450 mm – POZYCJONER WIDEŁ – PO PEŁNYM SERWISIE – NOWE OPONY – STAN 5/5 ### ✔ Używane i nowe wózki widłowe z gwarancją jakości – FT LOGISTICS Gotowy do pracy. Bez kompromisów. Ten JCB TLT30D to nie tylko maszyna — to gwarancja, że Twoja logistyka będzie działać sprawnie, niezawodnie i bez przestojów. Zaprojaktowany do najbardziej wymagających warunków – po pełnym serwisie technicznym i wizualnym prezentuje się jak nowy i jest gotowy do natychmiastowej eksploatacji. --- ### 🔧 Kluczowe dane techniczne 📅 Rok produkcji: 2022 ⏱ Przebieg: 3446 mth ⛽ Silnik: DIESEL 🏋️ Udźwig: 3000 kg 🔩 Maszt: teleskopowy – 4450 mm 📏 Pozycjoner wideł: 1100 mm 📦 Długość wideł: 1500 mm 🛞 Opony: Superelastyczne (100%) ✔ Stan techniczny: 5/5 – po pełnym serwisie, gotowy do pracy ✨ Stan wizualny: odnowiony, bez korozji, jak nowy 📐 Wysokość: 2200 mm 📐 Długość: 3200 mm 📐 Szerokość: 1300 mm 📐 Wysokość konstrukcyjna: 2200 mm 🛞 Opony: Przód 27x10-12 Tył 23x9-10 🚪 Pełna kabina z ogrzewaniem ⚖ Waga maszyny: 5200 kg 📦 Udźwig: 3000 kg 📍 Środek ciężkości: 600 mm --- Dcsdpfx Aezbr S Tsc Nsh ### 🏢 FT LOGISTICS Jakość, za którą ręczymy. Serwis, któremu możesz zaufać.

Stanje: rabljeno, Slotted spindle 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Weinig Unicontrol 11 window line including a wide range of tools ----- Optionally available (with additional charge) - Weinig Univar 6 profile beading machine (price on request!) - Götzinger PowerDrill drilling and milling center for windows and doors (price on request) Technical manufacturer description: ----- Pos. 1: Weinig Unicontrol 11 window line ----- Including existing tools - IV 67 wood and wood-aluminum - IV 77 wood and wood-aluminum - IV 90 wood Crosscut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake 3,000–6,000 rpm. Max. tool swing diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment pneumatically to 8 positions for top edge rounding Horizontal lower rounding unit ----- Motor with brake: 1.5 kW, spindle diameter 20 mm, clamping length 25 mm, speed 9,000 rpm Max. tool swing diameter: 130 mm Axial travel mechanically coupled with crosscut saw Radial travel pneumatically controlled Mortising and slotted spindle ----- With hydraulically clamped counter bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool swing diameter: 400 mm Tool clamping length: 640 mm Axial travel NC axis Standard position below table: 5–10 mm Radial travel: fixed Dcsdpfx Acoy T R Tuo Nsh 1st profile spindle (conventional and climb milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool swing diameter min. 140 mm, max. 232 mm Tool clamping length: 400 mm with counter bearing Axial travel 350 mm NC axis Radial travel NC axis Standard position below table: 5–10 mm 2 feed rollers opposite the spindle, axially pneumatically controlled, 8 positions Vertical upper profile milling unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool swing diameter: 130 mm Pneumatic adjustment to 8 axial and radial positions 2nd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool swing diameter min. 140 mm, max. 232 mm Tool clamping length: 400 mm with counter bearing Axial travel 350 mm NC axis Radial travel NC axis Standard position below table: 5–10 mm Indexed guide fence at the stop with sash bar support strip 2 feed rollers opposite the spindle, axially pneumatically controlled, 8 positions Vertical right-side profile milling unit at machine end ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool swing diameter min. 112 mm, max. 210 mm Pneumatic adjustment to 8 axial and radial positions Horizontal lower profile milling unit ----- Motor power with brake: 3 kW Spindle diameter: 40 mm Clamping length: 125 mm Spindle speed: 5,850 rpm Tool s...

Stanje: rabljeno, Slotted spindle 1 0 Number of milling units: 2 pcs. Spindle diameter: 40,50 mm Position 1: Okoma angle combination UF1 S and Position 2: Rebating machine UF2 EG including Position 3: Tooling IV78 wood, IV78 wood exterior doors, IV78 wood-aluminum windows Gutmann with straight and inclined cheek For sale on behalf of a customer ----- Technical manufacturer’s description: Pos. 1: Okoma UF 1 S slotting and profiling machine – Rebating machine ----- Compact, heavy-duty window processing center with cast-iron construction, consisting of: Crosscut saw with top-mounted blade, 12-position turret stops, positively guided blade guard for accident prevention Slotting spindle: 40 mm diameter x 252 mm, dual-stroke for 3 tool positions (stroke height 83 mm), 7.5 kW motor Roller table, adjustable on both sides 0-60 degrees automatic feed with various infinitely adjustable feed speeds, double pneumatic clamping, length stop LAS 3-position system, 2300 mm automatic transfer to profiling section Profiling spindle: 40 mm diameter x 252 mm pneumatic stroke 112 mm (adjustable) for 2 tool positions 7.5 kW motor, spindle horizontally adjustable to the tool’s working edge, front milling stop jaw adjustable glazing bead saw, 3 kW motor, 4-position turret head adjustment, heavy-duty articulated feed, infinitely adjustable 0-25 m/min, roller sets can swivel inwards and outwards, back gauge with 5-position turret head frame milling device ----- Pos. 2: OKOMA rebating center Model UF 2 EG ----- Energy data: - Operating voltage: 3 phase, 380 V, 50 Hz. - Compressed air: Air consumption 13 NL/cycle; operating pressure: 8 bar Conditioned air: per Pneurop 6611 1. Profiling spindle 1: - Spindle arrangement: right - Power 11 kW - Speed 7000 rpm - Direction of rotation: climb and conventional cutting - Spindle diameter 50 mm - Usable length 272 mm - Max. tool diameter 230 mm - Vertical movement of the profiling spindle Drive: pneumatic cylinder, 90 mm stroke for 3 tool positions Position sensor: limit switch - Horizontal movement Drive: pneumatic cylinder forward-backward Position sensor: limit switch - Automatic plunge-cutting: Plunge speed adjustable for splinter-free rebating - Protective and extraction hood with 140 mm connection 2. Profiling spindle 2: - Spindle arrangement: right - Power 11 kW - Speed 7000 rpm - Direction of rotation: counter-cutting - Spindle diameter 50 mm - Usable length 272 mm - Max. tool diameter 230 mm - Vertical movement of the profiling spindle Drive: pneumatic cylinder, 90 mm stroke for 3 tool positions Position sensor: limit switch - Horizontal movement Drive: pneumatic cylinder forward-backward Position sensor: limit switch - Protective and extraction hood with 140 mm connection 3. Hardware milling device EG: - Spindle arrangement: right - Drive: three-phase motor 3 kW - Speed 6000 rpm - Spindle diameter 30 mm - Usable length 47 mm - No vertical positioning - Horizontal positioning Drive: pneumatic cylinder forward-backward Position sensor: limit switch (rear only) Dodpfsy T R Tbex Ac Noch - Protective and extraction hood with 80 mm connection Stop: - 1st stop: in front of spindle 1, manual chip removal, quick adjustment via parallelogram - 2nd stop: between spin...

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 0118703/99-1, Funkcionalnost: popolnoma funkcionalen, moč: 55 kW (74,78 KM), vhodna napetost: 400 V, vrsta vhodnega toka: Enosmerni tok, volumenski pretok: 1.200 m³/h, premer sesalne cevi: 150 mm, filtrirna površina: 8 m², À vendre, une installation d’aspiration Bristol 'TF' B 250. L’appareil est en bon état et immédiatement opérationnel. Djdjy R Ax Ropfx Ac Nech Type d’appareil : installation d’aspiration Modèle : BRISTOL 'TF' B 250 Puissance moteur : 0,55 kW Débit volumique : 1 200 - 1 500 m3/h Tension d’alimentation : 400V / 50Hz Diamètre buse d’aspiration : 150 – 200 mm Domaines d’application : brouillard d’huile, brouillard d’émulsion, poussières Année / N°Série : 1999 / 0118703/99-1 Transport et chargement organisables dans toute l’Europe en supplément et sur demande. Prix hors TVA. Visite possible sur rendez-vous. N’hésitez pas à nous contacter, notre équipe se tient à votre disposition pour tout renseignement. Reprise ou échange possible ! Achat / vente de machines ACHAT / VENTE DE MACHINES DE PRODUCTION & D’USINAGE DES MÉTAUX, ETC. Vous recherchez une machine d’usinage du métal de qualité à prix avantageux pour votre production ? Ou souhaitez-vous vendre la vôtre ? Plus d’informations et de moyens de contact sur notre site internet.

Stanje: rabljeno, 1 kos sistem za povezovanje CNP CANAPA 35 Djdey Tkiiepfx Ac Nech 220V Barva: kot prikazano, po slikah in ogledu Dimenzije D/Š/V: 90x60x76cm Stanje: rabljeno

Stanje: rabljeno, številka stroja/vozila: 1, konfiguracija osi: 3 osi, prva registracija: 08/1994, vzmetenje: jeklo, velikost pnevmatike: 265/70 r 19.5, Leto izdelave: 1994, Oprema: ABS,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used, among others, in: • quality control (QC) • end-of-line production testing • OEM laboratory and testing stations Dcedpfx Aceyc H N Ns Noh ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last ETL factory calibration: 05/2023 • Weight: 38 kg ⸻ Included equipment / scope of delivery • Main unit ATS 400 X8 with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test cables and accessories (see photos) • Manufacturer documentation • Original markings, nameplates, CE certified ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • Ready for immediate use in a production environment • No signs of tampering, all connectors and interfaces complete

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni digitalni višinomerni instrument Mitutoyo (model 192-613) – japonska natančnost in zanesljivost v eni napravi. Idealen za delavnice, kontrolo kakovosti in natančne meritve. Specifikacija: Dcedpfow N Hn Sex Ac Neh • Merilno območje: 0–300 mm • LCD-zaslon – dobro berljivi prikazi tudi pri slabši svetlobi • Funkcije: ZERO/ABS, PRESET, HOLD • Napajanje: baterija CR2032 • Stabilna osnova za zanesljivo oporo in natančne meritve • Original – Izdelano na Japonskem Stanje: Naprava je popolnoma delujoča, lepo ohranjena,

Stanje: dober (rabljeno), For sale: WTW PH96 meter in good condition. Dodpfx Asvdxu Nec Njch

Stanje: zelo dobro (rabljeno), HOMMEL WERKE LV-50E surface roughness measuring device. Dedpfx Aovdybdec Noch