Schunk Unilock 2X8 Nse 138T nakup rabljenega (1.032)

Stanje: dober (rabljeno), MIG/MAG hose package, MIG/MAG welding torch - MIG/MAG hose package: Dinse DIX KCZ 2-303, water-cooled - Length: 3.2 m Dodpfouahw Hox Adieck - Weight: 2.7 kg

Stanje: rabljeno, MIG/MAG torch package, MIG/MAG welding torch Dcsdpfx Aouahw Tsdiok -MIG/MAG torch package: Dinse DIX KCZ 2-303, water-cooled -Length: 5.3 m -Weight: 4.0 kg

Stanje: rabljeno, MIG/MAG torch assembly Dcodpfx Aefff Nujdisk - Dinse connector: DIX MSZ 2-304 - Length: 3.0 m - Water-cooled - Weight: 2.8 kg

Stanje: rabljeno, completely stainless steel electrically heated 386.40 kW upper and lower conveyor belt roasting length: 8,000 mm track width: 630 mm infinitely variable speed oil pump suitable for fire protection dirt conveyor electric lifting device Dedpfx Adoziabdjisck overall dimensions (L x W x H): approx. 11,550 x 1,700 x 2,900 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Popolnoma avtomatski stroj za zapiranje okroglih konzerv, prilagojen za želeno obliko konzerv. Možnost prilagoditve za različne preomere konzerv z dodatno opremo po želji. Dodpfx Astuqb Sediock Trenutno je na zalogi naprava za konzerve premera 73 mm. Uporabljena, izdelana leta 2024. Proizvodna zmogljivost do 45 konzerv na minuto.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Lubeca LW792 vuller en LW303 sluitmachine Diameterbereik: 50 – 160 mm Djdetqmwgopfx Adieck Hoogtebereik: 65 – 300 mm Productiecapaciteit: tot 70 stuks per minuut Gereedschap voor circa: 160 x 90 mm Lubeca LW792 blikvuller Lubeca LW303 blikkenafsluiter

Stanje: zelo dobro (rabljeno), INFICON Sensistor ISH2000 sistem za zaznavanje puščanja vodika Proizvajalec: INFICON Tip: Sensistor ISH2000 Dedpfxszdggwo Adijck Številka artikla: 590-750 Vrsta naprave: Detektor puščanja vodika Opis Profesionalen sistem za zaznavanje puščanja vodika, sestavljen iz INFICON Sensistor ISH2000, INFICON TGF10 polnilca sledilnega plina in iskalne sonde AP57. Sistem je namenjen industrijskemu preizkušanju tesnosti s postopkom sledi plina na osnovi vodika. Tehnični podatki Napajanje: 100 - 240 VAC Frekvenca: 50 / 60 Hz LCD zaslon Printer port Priključek za krmiljenje sonde TGF10 Tracer Gas Filler Tlak sledilnega plina: 0 - 9 bar Zahtevana dovodna stisnjenega zraka: 4 - 8 bar Sesalna zmogljivost: 70 Nl/min Polnilna zmogljivost: 600 Nl/min Končni vakuum: -0,85 bar Teža: pribl. 4,7 kg Oprema Sensistor ISH2000 TGF10 Tracer Gas Filler AP57 Counter Flow sonda Povezovalni kabli Napajalni kabel Originalna embalaža Dodatki, kot prikazano na slikah Območja uporabe Testiranje puščanja cevovodov Izmenjevalci toplote Tlačne posode Komponente za hlajenje in klimatizacijo Avtomobilska industrija Industrijske in testne naprave Stanje Rabljeno Vizualno stanje kot na slikah Prisotne običajne sledi skladiščenja in uporabe Obseg dobave kot prikazano. Spremembe in napake v tehničnih podatkih ter vmesna prodaja so pridržane.

Stanje: zelo dobro (rabljeno), KATALOGŠKA ŠTEVILKA 7037 TEHNIČNI PODATKI - Dolžina obdelovanca: 2780mm Dcsdpfx Adozfpr Reiok - Širina obdelovanca: 800mm - Glavni motor: 4kW - Širina brusnega traku: 150mm - Ventilator - Vrtljaji desno/levo - Električna nastavitev mize gor/dol - Premer odsesovalnega priključka: 140mm - Skupne dimenzije (d/š/v): 3760x1440x1520mm - Teža: 502kg PREDNOSTI – Ni ponovno barvano – Z ventilatorjem – Električna nastavitev mize – Rabljeni brusilni stroj, v zelo dobrem stanju Neto cena: 9500 PLN Neto cena: 2260 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (v primeru večjih nihanj tečaja se lahko cena spremeni)

Stanje: rabljeno, Technical Details: Max. cutting thickness: 0.5 – 70 mm Automatic piercing: 40 mm Control system: CNC 2050 Table size: 2x L:1500 x W:1700 x H:720 mm Torch heads: 2 units Approx. machine weight: 6.7 t Oxy-fuel flame cutting system with table. With the appropriate additional equipment, the following processes can be performed: Plasma cutting; plasma marking; marking; center punching; drilling Further information: 2x tables: L:1500 x W:1700 x H:720 mm, support area L:1500 x W:1500 mm; with exhaust connection Ø 320 x 60 mm Height control system: - Make ZAC 2100, type 7211-2-100 V02; - Size 105 x 165 x 130 mm - 24 VDC; torch voltage 30 – 300 V; protection class IP50 - Ignition height 1 – 25 mm in 0.2 mm increments - Cutting height 1 – 12.5 mm in 0.25 mm increments - Total piercing height 0 – 20 mm in 0.5 mm increments Height drive: - Model Linear Drive, type 2203; 24 VDC, 100 – 190 watts; stroke 220 mm Laser generator: - Manufacturer Kjellberg, type HiFocus 280i, welding rectifier - Power range 10A / 84V – 280A / 192V; protection class IP22; cooling type AF; with 2x cooling connection 1/2" Recooler: - Manufacturer Kjellberg, type KWE 360 Dedeu Nwfujpfx Adiock - Working voltage U1 400V / 2.5A; protection class IP22; coolant from Kjellberg mixture; with 2x cooling connection 1/2"

Stanje: rabljeno, Leto izdelave: 1977, Tehnične podrobnosti: Premer honanja: 125 mm Hod: 500 mm Razdalja: - mm Razdalja med mizo in spodnjim robom vretena: 525 mm Hitrost vretena za brušenje: 26-1200 (12 stopenj) vrt/min Djdpfx Asw Rv Tajdieck Premer honanja (min.): 30 mm Premer honanja (max.): 165 mm Pomik mize: 800/150 (max.) mm Vpenjalna površina mize: 500 x 1000 cm Skupna potrebna moč: 4,22 kW Teža stroja cca: 0,15 t Mere stroja (D x Š x V): 1,30 x 1,20 x 2,70 m Obstaja pomična miza, ki se pomika v vzdolžni in prečni smeri. Ročno mazanje s hlajenjem. Stroj omogoča honanje. Možnost nihajnega gibanja v hitrem hodu med dvema nastavljivima končnima pozicijama.

Stanje: rabljeno, Tlačni tlak / bar Pretok v litrih / l Pogonska moč 5,5 kW Hidravlična črpalka z motorjem Dcodpfxszcgipe Adisk Tehnični podatki (motor) Proizvajalec: BROOK HANSEN Tip: WU-DA132SJ-D Koda: A581502 obr/min: 1450 Moč: 5,5 kW Tehnični podatki (hidravlična črpalka) Proizvajalec: VICKERS Tip: PV010A2R Skupna teža: 190 kg

Stanje: dober (rabljeno), Approx. 11 scissor lift tables with manual lifting mechanism, 150 kg load capacity, 740x450 mm – used – Price per unit ex-location: only €195 (net)! Manufacturer: HanseLifter Model: Scissor lift table with manual drive Year of manufacture: unknown Load capacity: 150 kg Platform dimensions (LxW): 740x450 mm Lifting operation: manual via foot pedal Single scissor Lift height from floor: approx. 74 cm 2 swivel and 2 fixed castors made of polyurethane Swivel castors with brake Handle height: 935 mm Length: approx. 1 m Dead weight: approx. 48 kg New price: approx. €485 Dsdpfxswxwctj Adieck Condition: good Available: immediately Location: Warehouse Frankenberg

Stanje: delavnici obnovljeno (rabljeno), Skupna dolžina 550 mm, vključno z 2 hidravličnima stranskima pritiskaloma in 2 nastavitvenima registroma za okvirne stebre 70 mm. Po potrebi so na voljo tudi: magnetne letve s 3 cevmi, 2 magnetoma in 1 luknjo za vložke, primerno za lesene mere: 18/20/24/25,5/38/40/45/48/50/58/60 in 75 mm, ter vložki s pritrdilnim zatičem 12 mm Ø v različnih širinah od 2 do 12 mm. Dedper Ezyxsfx Adieck

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Sušilnica za les s 3 komorami (popolnoma funkcionalna, rabljena) Parametri: Dodezg Iw Iopfx Adieck Dolžina: 12,9 m Širina: 8,8 m Skupna višina: 5,2 m / Uporabna višina: 4,1 m Vroča voda: 90 °C Dodatne tehnične podrobnosti so na voljo na zahtevo. Možen je ogled na lokaciji ter preizkus delovanja.

Stanje: rabljeno, voznikova kabina: drugo, vrsta prenosa: drugo, Leto izdelave: 2021, Ostalo: * Možen je odkup in zamenjava vozil ter strojev. * Prodajna cena ne vključuje prevoza in prenosa. * Brez odgovornosti za tiskarske in pisne napake. Djdpfxezcfz Ro Adisck * Pridržujemo si pravico do napak, sprememb in medčasne prodaje. * Ponudba ni zavezujoča. * Fotografije so lahko zgolj simbolične. Cena velja za trenutno stanje. * Vse navedbe brez garancije.

Stanje: rabljeno, voznikova kabina: drugo, vrsta prenosa: drugo, * Bush and log wood up to Ø 220 mm * Hydraulic system (independent oil supply, does not require tractor connection) * Required input speed: 1,000 rpm * Chipper unit rigid Dcjdpfjzcfzqjx Adisk * Discharge to the right (in direction of travel), discharge chute foldable * Robust housing with sound insulation * Discharge chute rotatable 360°, deflector flap infinitely adjustable * Synchronously-controlled feed rollers (hydraulic-mechanical) * Safety system operated via safety bar * Feed roller control (hydraulic) * Hydraulic adjustment for chip length, range 5–20 mm * Feed roller opening: 245 x 220 mm * Cutter disk with 2 adjustable knives * Cutter disk diameter: 730 mm, thickness: 30 mm * Foldable feed table, dimensions 1,050 x 880 mm (W x H) * PTO shaft – custom-built – with overrunning clutch and slip clutch * Overhead discharge * Automatic overload protection Additional information: * Trade-in and purchase of vehicles and machinery possible * Sales price does not include transport and delivery * No liability for typographical or printing errors * Subject to error, change, and prior sale * Offer non-binding * Photos may differ. Price applies to current condition * All information without guarantee.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation Dodpfx Adjfdkb Tsieck - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm Djdpfxed Tbbdj Adisck - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) Djdpfx Ajmhhypodisck - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Dcodsmhh Dhepfx Adiek - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: Dedpfxsmhh Dzo Adieck - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone Dcjdpfxsh R Taqe Adiek - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg Dcjdpfx Ademhhx Ieiok - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. Dodpfemhhyasx Adiock When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time Dodpfemhh Ansx Adieck - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.