Rems 1/4"-1 1/2" nakup rabljenega (119.053)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm Dkjdpfx Ajfdkb Tjpljl - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Dksdpfx Ajd Tqalsplol Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) Dkodpfx Aefdkb Ujpljl - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm Dkodpfsguk A Hox Aplol - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm Dedpfx Apsfdkbhjlekl - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth Djdpfxeguk Dkj Aplskl - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost: 9.150 kg, nosilnost na odsek shranjevanja: 3.050 kg, skupna dolžina: 22.800 mm, skupna višina: 3.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 22.800 mm, 4 dvopolna paletna regala (M35112711-3) vsak 5,7 m dolg, 3,5 m visok, 1,1 m globok, vsak s 2 polji, širokimi 2,7 m, vsak s 3 nivoji prečk, nosilnost na polje 3000 kg. - 12 okvirjev (RM3511 - RAL5019) - 24 talnih plošč, podlag, pritrdilni material - 48 talnih sider (ZZBA1210) - 48 posameznih prečk (T2711 - RAL2008) Dksdpoyz Iccofx Apljl - 4 oznake nosilnosti (BSMcP) Okvirji so vijačeni, ne predmontirani Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - brezplačna dostava na gradbišče / mesto montaže - razklad tovornjaka izvaja kupec z lastno dvižno opremo - dobave po celotni Nemčiji, razen otokov! Dobave v EU države po individualnem dogovoru.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, skupna dolžina: 71.000 mm, skupna višina: 4.000 mm, razmak između stupova: 2.700 mm, višina police: 4.000 mm, število vrst polic: 7, nosilnost: 6.000 kg, višina okvirja: 4.000 mm, obremenitev na par nosilcev (maks.): 3.000 kg, Paletni regalni sistem 4 m visok, na polje 2 prečkinski ravni (svetlina 2700) Dkedpoyyny Ejfx Aplol Obseg: 32 okvirjev 4 m visokih 128 talnih sider 18 zaščitnih kotov proti naletom 100 prečk dolžine 2,7 m, višina 0,11 m 150 mrežastih polic 89/110, nosilnost 1000 kg 7 tablic z nosilnostjo Dobava na gradbišče brezplačno Okviri privijačeni, ne predmontirani Prevoz / Dobava: - največ 20 delovnih dni po prejemu plačila - dobava brezplačno na gradbišče / mesto montaže - raztovarjanje s tovornjaka opravi kupec z lastno dvižno napravo - Dobave se izvajajo po celotnem območju Zvezne republike Nemčije, razen otokov! Dobave v države EU po individualnem dogovoru.

Stanje: zelo dobro (rabljeno), Stanje: Rabljeno, z normalnimi sledmi uporabe, tehnično popolnoma funkcionalno Proizvajalec: Vetter (Nemčija) Država izdelave: Nemčija 📦 Komplet vsebuje: 2x zračna blazina Vetter tip 1/6 komplet zračnih cevi (rumene + rdeče) hitra spojka transportna torba komplet točno kot na fotografijah ⚙️ Tehnični podatki: Dksdpfx Aey Af Tnsplsl Model: Tip 1/6 Največja nosilnost: pribl. 3,2 t (32 kN) – vsaka blazina Maks. delovni pritisk: 0,5 bara Prostornina: pribl. 403 L Poraba zraka: pribl. 603 L Cev: DN 19 mm delovni tlak 1 bar (14,5 PSI) ISO standard 🛠️ Uporaba: tehnično reševanje (gasilci) dvigovanje vozil in strojev delavnice in industrija servisna in interventna dela 📌 Dodatne informacije: priznan nemški proizvajalec – Vetter komplet je popoln in pripravljen na delo trdna, vzdržljiva konstrukcija hitro in varno dvigovanje težkih predmetov prodaja točno kot na slikah

Stanje: zelo dobro (rabljeno), Ponujam obtočno črpalko priznanega proizvajalca WILO, model TOP-E 40/1-10 z elektronskim upravljanjem. Črpalka je namenjena za ogrevalne sisteme, HVAC in industrijsko uporabo. Opremljena je z elektronskim modulom z zaslonom in nastavitvijo delovanja, kar omogoča optimizacijo porabe energije in učinkovitosti. 🔧 Tehnični podatki: Proizvajalec: WILO Model: TOP-E 40/1-10 Napajanje: 230V / 50 Hz Tip: elektronska obtočna črpalka Premer priključka: DN40 (pribl. 40 mm) Razred izolacije: F Zaščita: IP43 Dkodpoy Abf Hsfx Aplol Tlak: PN6 Temperatura medija: do 110°C Hitrost vrtenja: 850 – 2850 obr./min Moč: 30 – 570 W Tok: 0,45 – 4,80 A 📦 Stanje: Rabljeno. Vidni so običajni znaki uporabe, naprava je tehnično v dobrem stanju in popolnoma delujoča. 📌 Dodatne informacije: Elektronska regulacija delovanja Visoka kakovost izdelave – proizvodnja EU Idealna za sistem centralnega ogrevanja, industrijsko in obtočno uporabo Robustna konstrukcija.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.280 mm, skupna širina: 390 mm, skupna višina: 40 mm, 120 pcs. Shelves approx. 128 x 39 x 4 cm, SSI Schäfer R3000, Second Choice (New Item) Shelf Racking, Workshop Racks, Storage Racks, Manual Storage, Boltless Shelving, Small Parts Storage B40/392/70, ZB341315, ZB9414 Dodsy Iw Emopfx Apljkl Specifications: - Length: approx. 128.1 cm - Width: approx. 39 cm - Height: approx. 4 cm - Quantity: 120 pcs. shelves SSI Schäfer R3000 - Load capacity: max. 100 kg per shelf - Surface: Sendzimir galvanized - SECOND CHOICE (NEW ITEM) (This is a second-choice product, new and unused. Second choice means that dust deposits, minor scratches, or slight soiling may be present.) - Ex stock Wietmarschen Price: €960.00 net €1,142.40 gross You will receive an invoice with VAT shown separately. Shipping: Delivery is available upon request via our partner freight forwarder. Shipping costs depend on the postal code. Assembly: Our trained staff is happy to provide professional assembly and disassembly of your facility upon request. Our recommendation: Let us know your requirements... We are happy to assist you with implementing your projects, from planning through ordering to installation.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.310 mm, skupna širina: 390 mm, skupna višina: 40 mm, 120 pcs. Shelf Panels approx. 131 x 39 x 4 cm, SSI Schäfer R3000, Grade II (New Goods) Shelving Racks, Workshop Racks, Warehouse Racks, Hand Storage, Boltless Shelving, Small Parts Storage B40/392/70, ZB341315, ZB9414 Data: - Length: approx. 131.2 cm - Width: approx. 39 cm - Height: approx. 4 cm - Quantity: 120 pcs. shelf panels SSI Schäfer R3000 - Load capacity: max. 100 kg per shelf panel - Surface: Sendzimir galvanized - GRADE II (NEW GOODS) (This item is a Grade II product, new and unused. Grade II means there may be dust deposits, minor scratches, or soiling.) - Available from stock Wietmarschen Price: €960.00 net €1,142.40 gross You will receive an invoice with VAT shown separately. Transport: Delivery is carried out upon request by our partner forwarding agent, costs depend on postal code. Assembly: Our trained staff are happy to assist you with the professional assembly and disassembly of your operating equipment if required. Djdjy Iwznspfx Aplskl Our recommendation: Let us know your requirements… We are happy to support you with the realization of your projects, from planning and ordering through to assembly.

Stanje: novo, Ponujam profesionalno črpalko za sodčke priznanega nemškega proizvajalca Lutz – namenjeno delu z različnimi tekočinami (kemikalije, olja, industrijski mediji). ✅ Stanje: ✔️ Novo ✔️ Ohišje motorja je bilo zamenjano z originalnim (tovarniškim) – prejšnje je bilo poškodovano med transportom ✔️ Popolnoma delujoča, pripravljena za uporabo 🔩 Tehnični podatki: Proizvajalec: Lutz Pumpen GmbH (Nemčija) Model črpalke: MP PP 50/41-R DL SS Motor: MI 4-230 Napajanje: 220–230 V / 50 Hz Moč: 450–500 W Tok: 2,5 A Zaščitni razred: IP24 Dolžina cevi: 1200 mm Material: PP (polipropilen) + nerjavno jeklo (SS) ⚙️ Uporaba: industrijska kemija olja, tehnične tekočine industrija, delavnice, proizvodnja praznjenje sodov in rezervoarjev 📦 Komplet vsebuje: ✔️ Črpalka Lutz ✔️ Motor MI 4-230 ✔️ Cev + oprema, vidna na slikah Dkedpfsyzulwox Apljl 🌍 Država izvora: 🇩🇪 Nemčija ℹ️ Dodatne informacije: Visokokakovostna oprema – nemška proizvodnja Idealno za profesionalno uporabo Možnost pošiljanja ali osebnega prevzema

Stanje: rabljeno, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, moč: 18 kW (24,47 KM), vhodna napetost: 400 V, vhodni tok: 40 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, Oprema: CE označba, dokumentacija / priročnik, Ponujamo to rabljeno obdelovalno središče FORMAT-4 PROFIT H200R 13.33 s prehodom, letnik 2022. Tip: PROFIT H200R 13.33 Serijska številka: 30B.05.067.22 Djdpfxeyvtq Uj Aplekl Koda: 9417 Nazivna napetost: 400,0 V Število faz: 3P+N Frekvenca: 50/60 Hz Nazivni tok: 40,0 A Moč: 18,0 kW Leto izdelave: 2022 Krmilna napetost: 24 VDC Minimalno varovalo: 32 A Maksimalno varovalo: 50 A Minimalni zračni tlak: 8 bar Poraba zraka: 350 Nl/min Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: zelo dobro (rabljeno), Wide Belt Sander FORMAT 4 Finish 1302 - used - Constant working height thanks to top section adjustment, Combination unit with contact roller and sanding pad, Contact roller is rubber-coated, Pneumatic activation of contact roller, Electronic segmented sanding pad, Digital display for sanding height, Infinitely variable feed speed, Automatic belt centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 Abrasive belt size: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min. Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Min. workpiece thickness: 5 mm Extraction port diameter: 2x200 mm Motor power: 18.5 kW Motor power (second motor): 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Dkedpfxjxnm Rco Aplol Quality Information: - Belt tracking / imbalance checked - Sanding pad checked / refurbished - Height adjustment checked - Complete basic cleaning - Electrical system checked - Immediately ready for operation

Stanje: rabljeno, Leto izdelave: 2001, DDS vlažilnik Hitropritrditvene tirnice Technotrans hlajenje in kroženje Brez obračanja Dodpfsyx A S Hex Aplokl Števec izpisov: 42 milijonov.

Stanje: zelo dobro (rabljeno), Naprodaj električni motor podjetja Kaltenbach Maschinenfabrik Cena velja za 1 kos Stanje: uporabljen, delujoč Motor preverjen s testerjem Vidne običajne sledi uporabe in skladiščenja Tehnični podatki: Proizvajalec: Kaltenbach Maschinenfabrik Tip: DKV 112M 238 4 Trifazni motor Moč: 1,7 / 2,6 kW Dedpfx Apjyv Uvxslskl Napetost: 400 V, 50 Hz Zaščita: IP54 Izolacijski razred: F Število vrtljajev: 700 / 1415 obr/min Dahlander večhitrostni motor Premer gredi približno 28 mm

Stanje: dober (rabljeno), Heidelberg Stahlfolder Ti 52 4/4/1 stroj za zgibanje Stroj je konfiguriran za zgibanje do 16 strani. Tehnične specifikacije: Minimalna velikost papirja: 105 x 150 mm Maksimalna velikost papirja: 520 x 840 mm Visokozmogljivo podajanje Konfiguracija: – 4 kasete na prvem modulu Ti-52 – 4 kasete na drugem modulu 2.Ti-52 – 1 elektronski nož – Mobilna dostava Nastavitev hitrosti zgibanja z inverterjem Dodpfxjywdmco Aplskl Zmanjšanje hrupa kaset Beckerjev kompresor Senzor dvojnega lista Elektronski števec z razvrščanjem Električna dostava z nastavljivo hitrostjo dostave. Rezervni deli, orodje in dokumentacija so vključeni. Stroj je v dobrem stanju in pripravljen za uporabo.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost: 4.000 kg, Ročna stebrna dvižno-vrtljiva naprava Severt z ustrezno perforirano mizno ploščo vključno, 1500 x 1500 x 200 za privijačenje, vključeno. Po želji z orodjem za dodatni komplet perforirane mize. Odlično stanje (glej video). Hidravlično nastavljiva višina: min. 800 mm, največja višina 2400 mm. Nosilnost 4000 kg. Perforirana miza 1500 x 1500 x 200, tip 28 mm. Dodpfsyli Uyex Apljkl

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 1.800 h, No. 3131 CNC Machining Centre FORMAT-4 profit H10 22.43 Used, year of manufacture 2017 Operating hours approx. 1800 h Package consisting of CNC Machining Centre FORMAT-4 profit H10 22.43, Feeding Unit FORMAT-4 L-Motion, and Extraction System FELDER RL 300 CNC Machining Centre FORMAT-4 profit H10 22.43 Technical Data: Phenolic resin matrix table system Grid table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control console Handheld terminal for remote axis control Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine frame: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24,000 rpm Central extraction via combined connections (D=250mm) Software: Woodflash German (H20/H08/H10/H50) Axis travel H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working area: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Feeding Unit FORMAT-4 L-Motion Technical Data: Year of manufacture 2017 2-axis version with 4 storage positions for loading an H10 with lifting table CNC loading Gentle transport Fully automatic panel handling Workpiece dimensions: Length 2000-4200 mm / Width 600-2100 mm / Thickness from 8 mm / Panel weight 200 kg Density: Chipboard 650 kg/m3 / Raw MDF 750 kg/m3 Stack height 1800 mm Extraction System FELDER RL 300 Technical Data: Year of manufacture 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar at 40 NL/min Operating pressure in the unit 6 bar Chip container volume 500 l Fire extinguishing system with powder extinguisher, 12 kg dry powder extinguisher Sale on behalf of customer, ex location Leipzig, without dismantling, transport, or installation Errors in description and price reserved Dismantling and loading by us is available as an option To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place in as-is condition Dedpferrh T Aox Aplokl Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; sold as seen Pictures and videos are examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: rabljeno, Leto izdelave: 1988, številka stroja/vozila: 1686, Counter for folding machines – Gremser VZG 10-4 Year 1988 – Serial No. 1686 with pulserless drive Available for immediate delivery – can be inspected and tested on site in Emskirchen / Nuremberg Online video inspection via Skype possible Dodpfx Aoh Ax A Aspljkl We would be pleased to welcome you for a visit – more machines in stock

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, volumenski pretok: 3.700 m³/h, moč: 2,1 kW (2,86 KM), vhodna frekvenca: 50 Hz, Systemair KTEX 60-35-4 ATEX Fan 2.1 kW 3700 m³/h, suitable for installation in air ducts Dksdsvu Hrkjpfx Apljl KTEX fans are distinguished by a compact, streamlined design and a powerful, forward-curved centrifugal impeller, paired with reliable, ATEX-certified AC motors. - Power: 2.1 kW - Voltage: 230/400V 50Hz 5.8/3.8A, IP44 - Maximum airflow: 3,704 m³/h - Pressure: 580 Pa - Impeller speed: 1,392 rpm - Minimum static back pressure: 225 Pa - Maximum air temperature: 40°C - Maximum conveyed air temperature with speed control: 40°C - Insulation class: F - Explosion protection marking: II 2 G Ex eb h IIB+H₂ T3 Gb - Certificate: Presafe 17ATEX9970X - Ambient and cable temperature: -20 to 40°C - Dimensions (inlet/outlet H x W): 350 x 600 mm - Weight: 42 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Rems Tornado 2010 stroj za rezanje cevi Dobro delujoče stanje. Oglejte si tudi naše druge oglase. Djdpfxerzu T Aj Aplekl

Stanje: dober (rabljeno), Manufacture: alloyed Dedpfxeuhn Dcs Aplokl Tip: 4 sec Turntable

Stanje: dober (rabljeno), Manufacturer: ALLOYD Type: 4 seec Dedpfjuhn Disx Apljkl Rotary table