Oriental Motor Csd2120-T nakup rabljenega (90.455)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, obratovalne ure: 13.101 h, nosilnost: 2.000 kg, dvižna višina: 6.500 mm, vrsta goriva: plin, tip droga: triplex, gradbena višina: 2.772 mm, dolžina vilic: 1.150 mm, FRIEDMANN FORKLIFTS – REMADE FOR ACTION WE ARE HERE FOR YOU. WITH DEDICATION, PASSION, AND EXPERTISE. Used industrial trucks from selected premium manufacturers, thoroughly serviced, tested, and fully refurbished by us in accordance with FEM 4.004 (UVV) regulations. - Over 350 vehicles in stock Kdedpfx Aowzt Tysl Nok - Custom modifications of any kind upon customer request possible - International transport with suitable vehicles and customs clearance available upon request - See for yourself and visit us at our facility Friedmann Forklifts – Our Quality Promise - Full operational safety in compliance with FEM 4.004 - Serviced & tested batteries (C5 test) on electric units (minimum 70% capacity)

Stanje: rabljeno, prevoženi kilometri: 565.000 km, moč: 250 kW (339,91 KM), prva registracija: 01/2007, število sedežev: 42, vrsta prenosa: samodejen, emisijski razred: Euro 5, Oprema: ABS, klimatska naprava, parkirni grelec, * Our internal number: 1029 * COLLECTION PRICE * No TÜV (roadworthiness certification), no new batteries, ... * Volvo Kdedsfg Nrgepfx Al Nok * 8700 LE * AIR CONDITIONING * 250 kW – EURO 5 – Engine overhauled in 2016 (approx. 468,994 km) for over €27,300 (net) * Injection pump, etc. fuel lines repaired at VOLVO in 12/2018! * At approx. 416,163 km, transmission overhauled! * At approx. 410,331 km, engine control unit replaced by VOLVO. * ZF automatic transmission * Retarder * Auxiliary heater * Manual wheelchair ramp * Complete repair history available – partial extract: * Brakes, NOX sensor replaced, rear axle air springs, engine maintenance, air conditioning service, air dryer replaced, door cylinder of door 2 replaced, regular oil changes of all oils, idler pulley replaced, crankshaft oil seal replaced, rear axle modulator replaced, fuel feed pump replaced * All information provided without guarantee * Intermediate sale reserved * We refer to our general terms and conditions * WE ALSO HAVE A VOLVO PARTS WAREHOUSE * Please contact us if needed –

Stanje: rabljeno, prevoženi kilometri: 162.000 km, moč: 120 kW (163,15 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, prva registracija: 02/2017, emisijski razred: Euro 6, barva: bela, število sedežev: 14, Oprema: ABS, klimatska naprava, * Our internal no.: 1066 * Sprinter 516 City * Bodybuilder: Integralia * 120 kW / 160 hp / Euro 6 * Automatic transmission * 2 x air conditioning units * Auxiliary heater * 14 seats * Standing room * New starter motor Kodpfov T Szzsx Al Njdk * Replacement engine and replacement transmission * Permissible gross weight: 5,500 kg * Tinted windows * Folding windows * Manual folding ramp * LED matrix display * Very good front and rear axle tires * Vehicle is in use – mileage and condition may vary * All information provided without guarantee * Subject to prior sale * Please refer to our Terms and Conditions

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Kjdpfji Dfidjx Al Nodk Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Interroll roller conveyor 1.65 m with drive The Interroll roller conveyor section is in very good condition. In addition, the conveyor is equipped with its own drive motor. Series: 5600 Width: 410 mm Length: 1650 mm Pitch: 75 mm Load capacity: 200 kg per meter Drive voltage: 400 Volt Kdsdshvmnijpfx Al Njk Complete plant closure. Large selection of mezzanine platforms, pallet racking, shelving racks, vertical carousels. High-quality industrial machinery, lathes, grinding machines, hand-held machines. More items – new and used – available in our shop! International shipping costs on request!

Stanje: rabljeno, moč: 74 kW (100,61 KM), prva registracija: 05/1953, vrsta goriva: dizel, število sedežev: 36, vrsta prenosa: mehanski, barva: rdeča, +++No vehicle registration documents available+++ +++Various attachments and windows included+++ Engine: Henschel 512 DJ Seating capacity: 35 + 1 tour guide (only 32 + 1 seats present) Transmission: 5-speed manual Tour guide microphone * Trailer hitch Kedpfx Asrmlq Rel Nsdk * Driver’s door * Roof hatches/ventilators * Vehicle dimensions: Length 9.28 m, Width 2.40 m, Height 2.8 m * Dual rear wheels * Tyre condition approx.: Front axle 70% - Rear axle 70% Our internal vehicle number: 4396 Subject to errors. Images and text may differ from the actual vehicle. Always over 180 vehicles in stock.

Stanje: rabljeno, prevoženi kilometri: 576.325 km, moč: 110 kW (149,56 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, prva registracija: 04/2009, emisijski razred: Euro 4, barva: bela, število sedežev: 20, Oprema: ABS, klimatska naprava, +++Engine knocks and makes noises+++ Engine: Mercedes Benz Euro standard: 4 Transmission: Manual gearbox Seating capacity: 19+1 high/fixed with 3-point seatbelts Safety * ABS, ASR * Fog lights Passenger compartment * Air conditioning * Luggage racks * Luggage nets * Air vents * Reading lights Kdodpfx Alev A Dp As Nok * Headrests * Tour guide microphone Exterior * Power steering * Tachograph with card * Sun visor * Electrically adjustable exterior mirrors * Driver's door * Central locking * Roof hatches, fans, roof ventilators Audio & Communication * Radio / CD Miscellaneous * German vehicle documents * Twin wheels * Tyres: front approx. 40%, rear approx. 40% * Our internal vehicle number: 10021 Errors excepted. Images and text may differ from the actual vehicle. Always over 300 vehicles available in stock.

Stanje: rabljeno, prevoženi kilometri: 46.987 km, moč: 103 kW (140,04 KM), prva registracija: 03/2021, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 7, dolžina tovornega prostora: 3.080 mm, širina tovornega prostora: 2.030 mm, višina nakladalnega prostora: 400 mm, Oprema: ABS, centralno zaklepanje, klimatska naprava, Leasing or hire purchase possible, subject to credit approval. We are happy to provide you with an offer, including for business startups. Fiat Ducato 250 (140) Replacement engine with approx. 2,000 km (verifiable with Fiat)! Engine, Transmission: * Engine F1AGL4113, 103 kW, 2287 cc, Euro 6C * 6-speed manual gearbox Assistance systems: * Cruise control * Start/Stop * ECO Kdjdpfxswh Ei Te Al Nsk Chassis, attachments: * 4 x 2 * Wheelbase 4035 mm * Leaf suspension * Ball-type trailer hitch * Towing capacity 3,000 kg * AdBlue * Spare tire Tyres: * Size 225/75R16C (see photos for condition) Body: * 3-way tipper * Internal dimensions approx.: 3.08 x 2.03 x H 0.4 m Cabin: * Double cab, 7 seats * Air conditioning * Electrically adjustable and heated mirrors * Electric windows * Central locking with remote control * Radio Vehicle no.: 6736 Sale exclusively to businesses or for export. Prices are net plus VAT or for export. All details without guarantee. PARLIAMO ITALIANO, GOWORIM PO RUSSKI, DOMLUVIME SE CESKY, WE SPEAK ENGLISH

Stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2002, obratovalne ure: 11.207 h, nosilnost: 4.000 kg, dvižna višina: 3.300 mm, vrsta goriva: dizel, tip droga: simpleks, gradbena višina: 2.300 mm, moč: 62,5 kW (84,98 KM), proizvajalec motorjev: Nissan, vrsta prenosa: samodejen, dolžina vilic: 2.000 mm, lastna masa: 6.325 kg, barva: rdeča, Oprema: bočni pomik, kabina, osvetlitev, spojka prikolice, Forklift truck: - Nissan - Model: F04 D400 - 11,207 operating hours - 4,000 kg lifting capacity - 6,325 kg unladen weight Kodpfx Alswf Icks Nsdk - Lifting height: 330 cm - Side shifter - Fork length: 200 cm - Overall height: 230 cm - Rockinger tow jaw - Lighting - Full cab - Heating - Nissan 62.5 kW engine, No.: 21826, ENGINE DAMAGE Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and omissions excepted; subject to prior sale!

Leto izdelave: 2024, stanje: novo, Suitable for Demag chain hoist (DK 1, DKUN 1, DS1 125-250 kg) / Motor KD63 / Friction trolley drive DRF200 Replacement fan cover / fan hood – not an original part! OEM part number 12481133 Kdodpfxoq U Iito Al Njk Larger quantities available on request. NEW, unused Item location: 75053 Gondelsheim See photos for details.

Stanje: rabljeno, prevoženi kilometri: 323.000 km, prva registracija: 07/2015, Leto izdelave: 2015, Fuso 7C18 refrigerated van with Carrier Supra 750 cooling unit, Lamberet refrigerated box, and tail lift • EURO 6 emissions standard • Cruise control • Leaf spring suspension front and rear • Automatic transmission • ABS • ASR / disconnectable • Airbag • Air conditioning • Central locking • Double passenger bench seat (3-seater) • Electric windows • Fog lights • Headlight leveling • Reversing camera • Tire size: 205/75 R17.5 • GVW: 7,490 kg • Unladen weight: 5,200 kg • Payload: 2,300 kg ! LAMBERET refrigerated box: • 12 pallet spaces • 3-part soft side curtain, longitudinally movable • Cold curtain • Rear portal doors • Right-hand side door • Aluminum impact protection strips bottom right and left • Double lashing rails right and left • Floor: aluminum checker plate • Dhollandia DLHM 10 tail lift, upright installation CARRIER Supra 750 refrigeration unit: • Diesel / electric (380 V) • Remote control in cab • Temperature recorder • !! Engine completely overhauled in our master workshop, 0 km! • !! New clutch! Kodswmn Suepfx Al Nodk - German vehicle - 1 owner! - TÜV / main inspection on request and for an extra charge: new! Subject to errors and prior sale!

Stanje: rabljeno, prevoženi kilometri: 869.450 km, moč: 316 kW (429,64 KM), prva registracija: 07/2005, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, vrsta prenosa: samodejen, emisijski razred: Euro 3, Oprema: ABS, parkirni grelec, Engine overhauled, cooling unit fully operational, analog tachograph, meat hanging system with meat rail tracks, Thermo King TS-300 diesel-electric. Kdjdof Dg Diopfx Al Nek

Stanje: pripravljen za uporabo (rabljen), Fanuc A06B-0146-B077 AC servomotor, serijska številka: C988A7708 / 3,0 kW 100 Hz, hitrost 1500 obr./min, rabljen, dobro ohranjen, 100 % delujoč, obseg dobave kot na slikah. Kdsdpox Ncaljfx Al Nok

Stanje: pripravljen za uporabo (rabljen), Fanuc A06B-0146-B077 AC servomotor, serijska številka: C985A6505 / 3,0 kW 100 Hz, hitrost 1500 min⁻¹, rabljen, dobro ohranjen, 100 % delujoč, dobava skladno s fotografijami. Kdsdpex Ncafofx Al Nok

Stanje: rabljeno, aggregate kit, profiling format unit, machining unit, milling unit, form milling unit, jointing milling unit, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, machining motor, milling motor for edge processing machine -HOMAG milling unit for edge jointing -with heavy-duty dovetail guide Kdjdpfxob Uhp He Al Nok -milling unit: swiveling -1x Perske motor -motor type: KCS 70.12-2D -power: 3.0/4.4 kW -voltage: 220/380/380 volts -frequency: 50/100 Hz -speed: 2,880/5,880 rpm -other motors with different specifications available from stock for an additional charge -dimensions: 1150/600/H1330 mm -weight: 346 kg

Stanje: rabljeno, Modular aggregate system, formatting processing unit, machining unit, milling aggregate, profile milling aggregate, jointing milling aggregate, cross-cutting aggregate, double-end tenoner, edge processing machine, scoring motor, machining motor, milling motor for edge banding machine Kdodpsb Uhrdofx Al Njk -HOMAG milling aggregate for jointing milling -with heavy-duty dovetail guide -Milling aggregate: swiveling -2x Perske motors -Motor type: KNS 70 12/2 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Alternative motors with different power ratings available from stock at additional cost -Quantity: 2x jointing milling aggregates available -Price: per piece -Dimensions: 1120/1100/H1340 mm -Weight: 530 kg

Stanje: rabljeno, Modular aggregate kit, format processing aggregate, cutting aggregate, milling aggregate, profile milling aggregate, jointing milling aggregate, cross-cutting aggregate, double-end profiler, edge processing machine, scribing motor, cutting motor, milling motor for edge processing machine -HOMAG milling aggregate for jointing milling -with heavy-duty dovetail guide Kdedeb Uhrijpfx Al Nek -milling aggregate: swiveling -1x Perske motor -motor type: not legible -power: kW -voltage: Volt -frequency: Hz -speed: rpm -other motors with different power ratings available in stock for an additional charge -dimensions: 1100/700/H1250 mm -weight: 354 kg

Stanje: rabljeno, Modular aggregate system, format processing unit, machining unit, milling unit, profile milling unit, jointing milling unit, cross-cut unit, double-end profiler, edge processing machine, scorer motor, spindle motor, milling motor for edge processing machine -HOMAG Milling Unit for Jointing Milling -with heavy-duty dovetail guide -Milling Unit: swivelable -1x Perske motor -Motor type: KNS 70 12/2 -Power: 3/4.4 kW -Voltage: 220/380/380 Volt Kdsdpfx Aob Uhrfel Nsk -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other motors with different power ratings available from stock for a surcharge -Quantity: 2x jointing milling units available -Price: per unit -Dimensions: 970/600/H1050 mm -Weight: 318 kg

Stanje: dober (rabljeno), Modular aggregate system, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, cross-cutting unit, double-end tenoner, edge processing machine, scoring motor, cutting motor, milling motor for edge processing machine - For sawing: edges on the front and rear of the workpiece Kodpednca Njfx Al Nedk - 1x: Perske motor - Type: KN60.09/2 - Power: 1.5 kW - Voltage: 220/380 Volt - Frequency: 50 Hz - Speed: 2810 rpm - Dimensions: 900/575/H450 mm - Weight: 112 kg

Stanje: dober (rabljeno), Module set, contour machining unit, cutting unit, milling unit, contour milling unit, joining milling unit, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor for edge processing machine - HOMAG cross-cutting unit for trimming edge overhangs at front and rear edges - with heavy-duty guide - Milling unit: swiveling - 1x Perske motor - Motor type: - Power: 0.75 kW Kedpfx Aeb Sc Svol Nedk - Voltage: Volt - Frequency: 300 Hz - Speed: 8,600 rpm - Other motors with different power ratings available from stock at additional cost - Dimensions: 990/620/H340 mm - Weight: 52 kg

Stanje: dober (rabljeno), Aggregate modular system, format processing unit, machining unit, milling unit, profiling milling unit, jointing milling unit, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, machining motor, milling motor for edge processing machine -HOMAG milling unit for jointing operations -with heavy-duty dovetail guide -milling unit: swiveling -1x Perske motor -Motor type: KCS 70.12-2D -Power: 3.0/4.4 kW -Voltage: 220/380/380 Volt -Frequency: 50/100 Hz -Speed: 2860/5860 rpm -other motors with different power ratings available from stock at extra charge -Dimensions: 1100/600/H1330 mm -Weight: 340 kg Kdodpfob R Ua Ejx Al Nek

Stanje: dober (rabljeno), Aggregate construction kit, formatting unit, cutting unit, milling unit, profile milling unit, jointing milling unit, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor for edge processing machine - HOMAG cross-cutting unit for trimming edge overhangs at the front and rear edges - with heavy-duty guide - Milling unit: swiveling - 1x Perske motors Kedpfob Sgzaex Al Njdk - Motor type: - Power: 0.75 kW - Voltage: Volt - Frequency: 300 Hz - Speed: 8,600 rpm - Other motors with different power ratings available from stock at extra charge - Dimensions: 940/620/H350 mm - Weight: 54 kg

Stanje: dober (rabljeno), Modular aggregate system, format processing aggregate, machining (cutting/removal) aggregate, milling aggregate, form milling aggregate, jointing milling aggregate, cross-cutting aggregate, double-end profiler, edge processing machine, scoring motor, machining motor, milling motor for edge processing machine -HOMAG milling aggregate for: jointing milling -with: heavy-duty dovetail guide -Milling aggregate: swiveling Kdedsdx Aiwjpfx Al Njk -3x Perske motors -Motor 1: Type KCS 70.12-2 D -Power: 3/4.4 kW -Voltage: 220/380/380 Volt -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Motor 2: Type KCS 70.12-2 D -Power: 3/4.4 kW -Voltage: 220/380/380 Volt -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Motor 3: Type KNS 51.14-2 D -Power: 1/2 kW -Voltage: 220/380/380 Volt -Frequency: 50/100 Hz -Speed: 2750/5700 rpm -Other motors with different power ratings available from our stock at an additional cost -Quantity: 1x jointing milling aggregate available -Price: per unit -Dimensions: 1370/1100/H1330 mm -Weight: 608 kg

Stanje: rabljeno, modular aggregate system, format processing unit, machining unit, milling unit, contour milling unit, edge jointing unit, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, machining motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy-duty dovetail guide -milling unit: swiveling -2x Perske motors -Motor 1 Type: KNS 71.16/201 -Power: 4.4/6.6 kW -Voltage: 220/380/380 Volt -Frequency: 50/100 Hz -Speed: 2860/5870 rpm -Motor 2 Type: MP-10-L -Power: 1.0/1.5 kW -Voltage: 220/380/380 Volt -Frequency: 50/100 Hz -Speed: 3000/6000 rpm -other motors with different power ratings available in stock at extra cost -Quantity: 1x joint milling unit available -Price: per piece -Dimensions: 900/1000/H1030 mm Kedpfx Ajb Uhi Nel Nedk -Weight: 360 kg

Stanje: dober (rabljeno), Aggregate modular system, contour processing unit, cutting unit, milling unit, form milling unit, joint milling unit, crosscutting unit, double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor for edge processing machine -HOMAG crosscutting unit for trimming edge overhangs at the front and rear edges -with heavy-duty guide -Milling unit: tiltable -2x Perske motors -Motor type: -Power: 0.22 kW -Voltage: Volt -Frequency: Hz -Speed: 18,000 rpm -Other motors with different power ratings available in stock at extra cost Kdedpfeb Sab Hsx Al Nek -Dimensions: 1240/600/H1100 mm -Weight: 296 kg