Maschinenbau Kitz Alb 1600 nakup rabljenega (3.910)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, HÄWA / SWT Maschinenbau Odrtevalnik – Novo -- ---Demonstracijski stroj --- na voljo takoj - Izdelano v Nemčiji - Tip H256 / 800 Ljdpfxsxx Am Us Al Nerk - Izdelano iz težke varjene jeklene konstrukcije - 4 pari pogonskih koles za hlode - 1 razdeljen, nazobčan par pogonskih koles za hlode - Pogon hloda frekvenčno reguliran - Frezalna roka iz težke jeklene konstrukcije - Frezalna glava: delovna širina 300 mm, udarne letve, udarna rezila in vodilni obroč - Frezalna glava opremljena s trdimi kovinskimi elementi - Hidravlično spuščanje frezalne glave - Pomik frezalne glave frekvenčno reguliran - Pogonska kolesa za hlode 800 mm - Premer hloda 0,2 m – 1,0 m - Dolžina hloda 1,0 m – 6,0 m - Skupna priključna moč 35 kW - z HBC radijskim daljinskim upravljalnikom

Leto izdelave: 2024, stanje: novo, - 150 mm feed height - 430 mm feed width Ledsful Uiopfx Al Njrk - 30 mm chip length - 2 chopping knives + 1 counter knife - 440 mm rotor diameter - 590 rpm rotor speed - 30 m/min feed rate - 37 kW main motor - 3 kW and 2.2 kW infeed rollers - 6,000 mm long infeed conveyor belt - 2,000 mm long discharge conveyor belt underneath the machine

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, • 350 mm maximum cutting height • 75-250 mm minimum/maximum cutting width • 100 – 350 mm minimum/maximum round timber diameter • 18-80 mm side board width • 1.8 – 6 m cutting length • 550 mm saw blade diameter • 4/6 simultaneous saw cuts Lsdpfx Ajhkh Npjl Nork • 5-30 m/min variable feed speed • 2 x 30 kW and 2 x 22 kW saw motors • 3 kW SEW feed gearbox motor • Automatic 6-position width adjustment • Infeed table with 3-way turning device • 2 pairs of centering rollers with pneumatic pressure • Powered infeed roller with 0.75 kW motor and pneumatic pressure • 2 pairs of powered outfeed rollers, each with 0.55 kW motor • 4 pairs of pneumatic pressure rollers in outfeed

Leto izdelave: 1993, stanje: dober (rabljeno), Wickert Maschinenbau GmbH Landau Vulcanizing Press Year of manufacture: 1993 Machine no.: 2758 Press force: 2,800 kN Heating plates: 500 x 500 mm Heating: electric Plate opening: 200 mm Control: Siemens S5 OP17 (conversion to S7 possible) Including sliding table, vacuum pump, vacuum chamber, storage tank In good used condition. With CE marking. Ljdpfen Sm A Sox Al Njrk

Leto izdelave: 1990, stanje: dober (rabljeno), Wickert Maschinenbau GmbH Landau vulcanizing press Year of manufacture: 1990 Machine no.: 2559 Pressing force: 2800 kN Heating plates: 500 x 500 mm Heating: electric Plate gap: 200 mm Control: Siemens S5 OP17 (conversion to S7 possible) Ljdsn Sm Ayjpfx Al Nork Includes sliding table, vacuum pump, vacuum chamber, storage tank Good used condition. With CE marking.

Stanje: novo, Leto izdelave: 2024, Maximum cutting height: 160 mm Maximum cutting width: 600 mm Feed rate: 5-30 m/min Saw motor: 37 kW (higher kW optional) Feed motor: 2.2 kW Maximum number of saw blades at 145 mm: 6 Lrjdou I Dmopfx Al Nsk Saw spindle diameter: 70 mm Weight: 3,200 kg Special equipment: - Electric height adjustment of infeed rollers - Laser with alignment adjustment - Powered roller conveyors - Electronic braking system

Leto izdelave: 2024, stanje: novo, - 6,000 mm cutting length - Minimum cutting length 600 mm - 5 saw supports - Cutting height 80 - 140 mm - 4 kW saw motor - 1.5 kW variable feed 10-30 m/min Lsdpfx Alspfcgao Nork Optional: - Disposal conveyor belts

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, - 340 mm cutting height - 70–250 mm maximum cutting width - 500 mm pass-through width - 6000 mm feed length - 3–20 m/min feed speed - 2 x 30 kW saw motors - 1.1 kW feed motor - 0.25 kW width adjustment motor - 1300 kg weight Lsdpfx Aohkh N Tsl Nsrk

Leto izdelave: 2024, stanje: novo, - 4 singulation stages Lredpfxjpfaubs Al Njk - Log length on request - Log diameter on request - Discharge height on request - 5.5 kW SEW geared motor - R127 SEW gearbox

Leto izdelave: 2024, stanje: novo, - 160 mm cutting height - 750 mm maximum cutting width - 5–50 (100) m/min stepless feed speed - 37–110 kW saw motor - 75 mm saw shaft diameter Lrsdjbrq Ndspfx Al Nek - 30–500 mm min/max edging width - 2 adjustable saw guides

Leto izdelave: 2024, stanje: novo, - 10,000 mm standard length - 800 mm standard roller width - 2.2 kW roller conveyor drive Ledpfx Alobrq R Dj Njrk - 0.75 kW feed roller drive - pneumatic roller lifting - pneumatic centering

Leto izdelave: 2024, stanje: novo, - 8000 mm standard length - 800 mm roller width Ljdpfx Alebu Sb De Nork - 1.5 kW drive gear motor - 0.75 kW cross transport drive

Leto izdelave: 2024, stanje: novo, Round timber cross conveyor - Number of chain strands according to customer specifications - Length and width according to customer specifications - Heavy-duty SEW geared motors Lredpfxshmp Ibe Al Njk - Solid pin conveyor chain with protective rollers

Leto izdelave: 2024, stanje: novo, • Chopping height: 240 mm Lodpfx Aenyidbel Nerk • Chopping width: 540 mm • Chopping length: approx. 25–35 mm • Number of chopping knives: 2 • Rotor diameter: 600 mm • Rotor speed: 590 rpm • Feed motors: 4 + 3 kW • Main motor: 45 kW / 55 kW / 75 kW • 6,000 mm infeed conveyor • 2,000 mm discharge conveyor beneath the machine

Leto izdelave: 2024, stanje: novo, max. cutting height: 160 mm max. cutting width: 600 mm min./max. edging width: 25-300 mm width adjustment times: 0.2-1.0 sec. feed rate: 5-30 (70) m/min saw motors: 37 kW (higher kW available) feed motor: 2.2 kW saw shaft diameter: 70 mm weight: 3,500 kg Standard equipment: 1 adjustable bushing 1 fixed bushing digital cutting width display automatic cutting width adjustment Optional equipment: electric height adjustment for feed rollers laser with adjustment device driven roller conveyors electronic braking system Lsdpfou I D Dsx Al Nerk

Leto izdelave: 2024, stanje: novo, The plant is available immediately! • Suitable for round timber diameters from 10 cm up to 50 cm • Suitable for round timber lengths from 2 – 6 m • 4-strand infeed conveyor, 6 m long • 4-strand singulator, 2 m long • 4-strand separator, 2 m long • Conveyor with pin conveyor chain M 112 and protective rollers • Block haul with 2-inch chain and pusher dogs • Special pushers for low-noise transport • Measurement with 1 mm resolution • Measuring frame with additional heating and sun protection roof • Display of all operating statuses on a 17" monitor • Fully automatic sequence control • Various storage options and sorting criteria • 5 ejectors left/right, powered by SEW geared motors with brake • Spacious, thermally insulated control cabin Lrjdpfx Aogvu Alel Nek • 4 surveillance cameras with flat screen monitor • Control cabinet with all cables included • Sorting criteria as agreed

Leto izdelave: 2024, stanje: novo, max. cutting height - ø 340 mm min./max. cutting width: 80 - 250 mm min./max. side board: 18 - 80 mm max. cutting length: 6,000 mm feed rate: 5 - 30 m/min saw motors: 2 x 55 kW Lrjdpfxou Izke Al Nok feed motor: 4.0 kW width adjustment motor: 0.55 kW infeed roller motor: 0.75 kW weight: 8,000 kg Special features: Synchronously adjustable laser infeed table extension up to 8,000 mm automatic width adjustment with 6 fixed positions equipment for 1,000 mm diameter blades motor-driven log turning device electronic braking system

Leto izdelave: 2024, stanje: novo, - 50 mm cutting height - 1210 mm maximum cutting width - 12 feed rollers - 10-30 m/min stepless feed rate - 37 kW saw motor (higher output available) Lrjdpfx Alsfdzrhj Nek - 2.2 kW feed motor - 70 mm saw shaft diameter - 225 mm circular saw blades - 4000 kg total weight

Leto izdelave: 2024, stanje: novo, - Machine with 3 pairs of feed rollers - Infeed and centering trough - Minimum log diameter: 100 mm Lodjfvbphepfx Al Nsrk - Maximum log diameter: 600 mm - Minimum log length: 2,000 mm - Feed speed: 30 m/min - 5 interchangeable carbide knives - 37 kW debarking motor - 9.2 + 5.5 + 7.5 kW feed drive units - Total weight: 9,000 kg

Leto izdelave: 2024, stanje: novo, • 2.5 – 6 m cutting length • 120 – 450 mm maximum cutting height • 80 – 250 mm cutting width Lsdsgp Su Eepfx Al Nerk • Infeed table with centering rollers • Infeed table with log turning device • Saw with 6-stage width adjustment • Outfeed bridge with 2 powered outfeed rollers • Outfeed bridge with 5 pairs of pressure rollers • 650 mm saw blade diameter • 2 x 37 kW bottom saw motors • 2 x 30 kW top saw motors • 6 saw cuts • 4 kW SEW feed gear motor • 5 – 30 m/min stepless feed speed

Leto izdelave: 2024, stanje: novo, max. cutting length 3,000–8,000 mm min. cutting length 500 mm max. cutting height 80–140 mm infinitely variable feed rate 10–30 m/min Lrodpfexfzlex Al Nok saw motor power 4.0–7.5 kW feed motor 1.5 kW number of saw carriages 2–6 weight 1,000–2,500 kg

Leto izdelave: 2024, stanje: novo, - 340 mm maximum cutting height - 70–250 mm maximum cutting width - 500 mm passage width - 6000 mm cutting length - 3–20 m/min feed speed Lredpe E Rg Sefx Al Nek - 2 x 18.5 kW saw motors - 1.1 kW feed motor - 0.25 kW width adjustment motor - 1300 kg weight

Stanje: novo, Leto izdelave: 2025, Haewa / SWT Maschinenbau Voziček izdelan iz težke varjene jeklene konstrukcije 4 pari pogonskih koles za deblo Lrsdpfecrp Akox Al Nsk 1 razdeljen, zobat par pogonskih koles za deblo Pogon debla z 2 hitrostma Hidravlika za izmetač Rezkalna roka iz težke jeklene konstrukcije Rezkalna glava: delovna širina 300 mm, udarne letve, udarna rezila in obroč za vožnjo Rezkalna glava opremljena s trdo kovino Hidravlično spuščanje rezkalne glave Pogonski sistem vozička reguliran s frekvenco, v = 0 – 60 m/min Tip H 249 / 800 Pogonska kolesa za deblo 800 mm Premer debla 0,2 m – 1,0 m Dolžina debla 2,0 m – 6,0 m (tudi daljše) Skupna priključna moč 35 kW Z upravljalno ploščo

Stanje: novo, 10 quick-change plates, each with 2 rolling stations (suitable for Dreistern). Lrodpfxour Ncvo Al Nok Shaft diameter: 50 mm Top shaft adjustable Bottom shaft adjustable centrally Top and bottom shafts with axial adjustment and counters (We are also happy to offer you profile rolls with the appropriate design upon request)

Stanje: dober (rabljeno), "WMG WM 6.3 / 8.0 / 6.3 x 10 - 3 Roll Crusher" for Sale Manufacturer: WMG Westfälische Maschinenbau Gesellschaft mbH Model: WM 6.3 / 8.0 / 6.3 x 10 Roll width: 1,000 mm Lrsdegtxnrjpfx Al Nsk Included: Drives