Ling Nerjaveče Toplotno Skrči Predor nakup rabljenega (1.691)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, leto zadnje generalne obnove: 2025, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Hsdpfx Afjvf E Avo Tjn Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 32.169 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.320 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 750 kg, skupna masa: 22.000 kg, kapaciteta rezervoarja za olje: 900 l, For sale is a complete baling press system consisting of conveying technology, baler (partially overhauled and tested), and wire stations. Technical data (baler): Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main press force: 60 t Hedpfxsviwdmo Af Tsn Pre-press force max.: 25 t Feed chute dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale size: 1,100 x 720 mm, variable length Drive power: 45 kW Total connected load: 60 kW Tying: 5-fold vertical Throughput rates at a bulk density of 30 kg/m³: approx. 5.5 t/h 50 kg/m³: approx. 10 t/h 100 kg/m³: approx. 16 t/h Bale weights: 400 up to 750 kg, depending on material PLC: Telemecanique TSX Micro Baler weight: approx. 22 t Scope of supply: 1 chain belt conveyor 1 Bollegraaf HBC 60A baler with fluffing unit (wirbulator) 1 maintenance platform with access ladder 2 wire stations with guide pulleys for 10 wire reel stands (without wire) The following repair and overhaul work has been carried out: - Hydraulic oil tank drained, cleaned, and refilled with new oil - Oil filter and air filter replaced - Hydraulic block partially resealed - Hydraulic hose at the hydraulic block replaced - Wire run-in marks at the base passages welded and smoothed - Tying unit cleaned and serviced - Electrical system repaired, door interlock switches partially replaced - Fluffing unit repaired - General maintenance carried out, machine lubricated - Machine tested under power, without material, in manual and automatic mode—see function video Remarks: The system has already been completely dismantled, stored, and is ready for prompt loading. Documentation (operating manual, CE, electrical/hydraulic circuit diagrams) is available. Viewing by appointment is possible. We accept no liability for the technical specifications or any errors.

Stanje: zelo dobro (rabljeno), Tip: T4 - 75 Izhodna moč: 75 kW Kapaciteta vode: 220 l Hsdpfx Ajyxmp Nef Ton Največja dovoljena obratovalna temperatura: 90°C Največji dovoljeni obratovalni tlak: 3 bar Električni priključek / poraba: 400 V / 50 Hz / C16A Dovoljena goriva po EN ISO 17225: lesni peleti, lesni sekanci Vzprašnik na vzmet

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, zunanji premer: 3.500 mm, uporabna prostornina rezervoarja: 50.000 l, TEHNIČNI PODATKI Število silosov: 2 Bruto prostornina: 50 m³ Premer valja: 3.500 mm Višina valja: 5.000 mm Premer iztoka: 200 mm Oblika strehe: Stožčasta 15° Spodnji del stožčaste oblike, vršni kot: 60° OPREMA Dvižne zanke Hjdpfsy Hiuwjx Af Tjn Odpiralna revizijska odprtina s premerom 600 mm z zaščitno rešetko Priključek za zaščito pred podtlakom/nadtlakom Priključek DN80 PN10 za polnilno cev Priključek z zaslepljenim prirobnico Priključek za prelivi Priključek za nivojski senzor

Stanje: rabljeno, Plastični trak Širina tira 600 mm Hsdpfx Ajy Hig Tjf Ten Višina nakladanja ± 350 mm Višina razkladanja ± 2.600 mm Skupne mere (D x Š x V): ± 5.800 x 2.400 x 3.150 mm premičen

Leto izdelave: 2002, stanje: rabljeno, z-axis travel 200 mm Max. clamping diameter for cutter heads 550 mm Hsdpjy A S U Sofx Af Tsn Max. permissible cutter head weight 150 kg Mounting plate diameter for cutter heads 360 mm Mounting taper nominal diameter for cutter heads 500 mm Machine weight approx. 2.3 t Required space approx. 2 x 1.5 x 2.03 m Cutter Head Setting and Measuring Machine In the production process of spiral bevel gears, the quality of the gear cutting tools used plays a decisive role. Especially in dry milling, a high gear quality and long tool life can only be achieved with precisely adjusted cutter heads. The CS 200 cutter head setting and inspection device enables quick and easy adjustment of the individual cutters, checks their positions, and documents the measurement results. The measuring cycle on the CNC-controlled inspection device is semi-automated: process steps are displayed to the operator on the screen for guided handling. The positioning of the individual cutters in the cutter head, as well as the height location of the cutter tips, is handled largely automatically via a special procedure and is simultaneously documented through a concentricity diagram. A subsequent measuring cycle checks the radial positions of all inner and outer cutting edges in the cutter head. If individual inspection parameters do not meet the specified tolerances, they can be individually re-adjusted. Thanks to the combination of a semi-automated setting process, operator-guided setup actions, and automatic measuring cycle, cutter heads can be conveniently, quickly, and with high precision. Operator-Guided Setting and Inspection Process - Graphical representation of cutter head configuration and measurement results with tolerance verification - Operator instructions in plain text (no coded information) - Easy assignment of measurement results to the respective cutters - Documentation of setting and measurement results via printer - Setting and inspection process suitable for stick blade cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Stanje: rabljeno, Leto izdelave: 2006, Napetost 110 - 230 V Frekvenčno območje 50 - 60 Hz Priključna moč 0,5 kVA Hsdpfeyhq T Asx Af Tjn Dimenzije VxŠxG 1000 x 800 x 1750 mm Teža 150 kg Merilni stroj za palična rezila. Oprema/pribor: - Merilna orodja - Vpenjalna sredstva - Računalnik - Monitor - Tiskalnik - Kabina - Tehnična dokumentacija

Stanje: rabljeno, Leto izdelave: 2007, Wheel diameter – max. 500 mm Hypoid adjustment ±70 mm Axle cross angle 90° Y-axis distance 150 – 350 mm Z-axis distance 120 – 340 mm Speed range – stepless 0 – 5000 rpm Spindle torque 57 Nm Taper 99.2 mm Drawbar force – tool clamping 23,000 N Braking torque max. 93 Nm Total connected load 20 kVA Total power requirement 15 kW Machine weight approx. 6 t Space requirement approx. 2.35 x 2.24 x 2.5 m Working area: Crown wheel diameter max. – 500 mm Hypoid adjustment X (v) – ±70 mm Axle angle – 90° Distance Y-(H) axis crown wheel/flange pinion spindle – 150 ... 350 mm Distance Z-(J) axis pinion/flange crown wheel spindle – 120 ... 340 mm Pinion spindle head: Speed range, stepless – 0 ... 5000 rpm Torque – 57 Nm at n = 0 ... 1240 rpm Torque – 54 Nm at n = 1240 ... 5000 rpm Internal taper (with adapter) – Ø99.2 mm (#39) Drawbar force for tool clamping max. – 23,000 N Crown wheel spindle head: Speed range, stepless – 0 ... 3000 rpm Torque – 95 Nm at n = 0 ... 750 rpm Hjdjukitxepfx Af Ton Torque – 93 ... 24 Nm at n = 750 ... 3000 rpm Internal taper (with adapter) – Ø99.2 mm (#39) / (Ø35.6 mm (#14)) Drawbar force – max. 23,000 N Max. crown wheel braking torque – 93 Nm up to 3000 rpm pinion speed at i = 1:4 Max. crown wheel braking torque – 93 Nm up to 1200 rpm pinion speed at i = 1:1.6 Max. crown wheel braking torque – 59 Nm up to 1200 rpm pinion speed at i = 1:1 Electrical: Total connected load – 20 kVA (machine effective power) Voltage – 3 x 400 V (others on request) Voltage tolerance – ±10% Frequency 50 Hz (others on request)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 2.125 h, Funkcionalnost: popolnoma funkcionalen, MG Recycling – Copper Cable Granulation Line Manufacturer: MG Recycling Hodex It N Uepfx Af Ten Model: Matrix400 Complete Cable Granulation Line Condition: Very good – Fully operational Availability: Immediate Technical Description: Granulation line comprising: • Pre-shredder – fully refurbished recently o All rotor bearings replaced o Gearbox bearings replaced • Conveyor with magnetic rollers for scrap separation • Dosing hopper • Feed conveyor • Blade mill with 3 / 4 / 5 mm sizing screens • Separation via cyclone and zig-zag separator • Finishing turbo • Density separation table • Dust extraction with bag filter Spare Parts Included: • Pre-shredder: 1 set of knives + counter-knives • Blade mill: 3 sets of blades and counter-blades Capacity: Approx. 200 kg/h of finished product Application: Copper cable processing and recycling Price: €95,000 (complete processing line) Spare Parts: €20,000 Other Information: • Photos and additional details available on request 📩 Contact us for further information

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Panel saw from 2012. This SCHELLING FH 4 features a nominal cutting length of 4250 mm and a maximum saw blade diameter of 350 mm. It offers a feed speed of up to 80 m/min and is equipped with an ARDIS software package for enhanced functionality. Includes a storage area. If you are seeking high-quality panel cutting, consider the SCHELLING FH 4 machine we have for sale. Contact us for further details. Panel dimensions • Length: 2000–4100 mm • Width: 300–2100 mm • Thickness: 6–60 mm • Panel thickness tolerance: -0.2 to +0.2 mm Machine specifications • Nominal cutting length (saw machine 430): 4250 mm • Main saw blade diameter (max): 350 mm • Scoring saw blade diameter: 300 mm • Max. saw blade projection above table: 95 mm • Maximum stack height: 80 mm • Alignment force of the pusher: 400–2000 N/piece • Maximum clamp opening: 90 mm • Working height: 970 mm • Total height: 2070 mm Drives and speeds • Main saw motor power: 15 kW • Saw unit feed speed (forward): 5–120 m/min • Saw unit feed speed (reverse): 120 m/min • Feed speed (forward): up to 80 m/min • Feed speed (reverse): up to 80 m/min Additional equipment • Panel storage system (Manufacturer: Grundner) • Length: 24.90 m • Width: 14.17 m • Stacking height: 2 m • Lifting height: 2.10 m • Maximum panel size (L x W): 4.20 x 2.10 m • Minimum panel size (L x W): 1.80 x 0.60 m Hsdpoyyw U Sjfx Af Ten • Maximum lifting capacity: 250 kg • Horizontal drive power: 2.2 kW • Horizontal travel speed: approx. 120 m/min • Vertical travel speed: approx. 40 m/min • Panel material: suitable for vacuum gripping technology • Connected load: 6 kW • ARDIS software package

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, ERFOR GR7 Granulator – Učinkovita rešitev za recikliranje plastike Ponujamo ERFOR GR7 granulator – robusten in učinkovit stroj, zasnovan za proizvodnjo visokokakovostnega regranulata iz plastičnih materialov. Idealna rešitev za podjetja, ki želijo predelati proizvodne odpadke in znižati stroške surovin. Ključne informacije: Zmogljivost: do 700 kg/h Materiali: LDPE, HDPE, PP (folije, proizvodni odpad, tiskani materiali) Stabilno, neprekinjeno delovanje Visoka in konstantna kakovost granulata Enostavno in zanesljivo upravljanje Oprema: Visoko zmogljiva plastifikacijska enota Hedpfx Afsy Eyrde Ton Avtomatski filtracijski sistem Granulacijski sistem Kompaktna, industrijska zasnova Zakaj GR7: Hitra donosnost investicije Zmanjšane izgube materiala Zanesljivo in dolgo življenjsko dobo Možnost prilagoditve potrebam kupca Stanje: Novo / izdelano po naročilu Proizvajalec: ERFOR / Koltex PRS Kontaktirajte nas – stroj bomo prilagodili vašemu materialu in zahtevani zmogljivosti.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, skupna masa: 720 kg, skupna dolžina: 320 mm, dolžina rezanja (maks.): 300 mm, Škarje za aligatorje JMC 320 tovarniško novo TAKOJ na voljo na zalogi IUT Beyeler AG, DE-06188 Landsberg Preizkušene škarje 320 so nujne za vsako smetišče in zdaj veljajo za industrijski standard za vse tovrstne škarje. Model 320 je ena naših najbolj priljubljenih škarij. S svojo močjo, kakovostjo in zanesljivostjo je prevladal na zahtevnem trgu. Model 320 je dovolj zmogljiv za najrazličnejša dela pri rezanju in čiščenju. Obdeluje avtomobilske odpadke, celotne menjalnike in ohišja menjalnikov, glave in bloke valjev, prevelike drsnike in seveda vse običajne odpadke iz barvnih kovin. rezanje kovin. 320 se lahko uporablja tudi za rezanje železnih kovin. Hsdpfx Afefxvklo Tjn Vsaka škarja za striženje aligatorjev ima 1 leto garancije, rezervni deli iz zaloge pa so na voljo v 24 urah po vsej Evropi.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1981, Drill diameter: 50 mm Total power requirement: 2.2 kW Machine weight approx. 0.6 t Drill Grinder KLINGEL Type BSA 50 Year of manufacture: 1981 Drill diameter: 3 - 50 mm Hjdpfowu Hklex Af Ton Point angle: 50 degrees Point angle: 50 - 180 degrees Drive power: 2.2 kW Weight: 600 kg Electrical diagrams are available - operating manual not included

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Kolenski stiskalnik Schling Tlačna sila 60 kN (6000 kg) Hod nastavljiv od 0 do 25 mm Zelo čist in v zelo dobrem stanju Hsdpfxjy Hkurs Af Ton

Stanje: rabljeno, Leto izdelave: 1999, Technical details: Max. gear diameter: 5 - 260 mm Gear width: 400 mm Module – max.: 15 Module – min.: 0.5 Internal gear measurement diameter: 30 mm Max. helix angle – external: > 85° Max. helix angle – internal: > 45° Vertical measuring range: 400 mm Centres distance: 5 - 600 mm Table diameter: 260 mm Max. table load: 100 kg Rotational speed: 30 rpm Total connected load: 1.6 kVA Machine weight approx.: 900 kg Space requirements approx.: 200 x 1300 x 2150 mm Hodpeqvcnnjfx Af Ton Retrofit 2018 3-axis CNC gear measuring centre Höfler ZP 260 for straight and helical gearing, also suitable for measuring rotationally symmetrical parts (concentricity, coaxiality, flatness, etc.).

Stanje: rabljeno, Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 50 mm, Oprema: dokumentacija / priročnik, Rabljeni brusilni stroj na prodaj. Idealno za delavnico in domače mojstre. Stroj je delujoč, vendar ima zaradi starosti vidne sledi uporabe. Odličen za ostrenje orodij in različna brusilna dela. Robustna zasnova za dolgotrajno uporabo. Obvezna oprema za vsakega obrtnika! Investirajte v kakovost. Hjdpfx Aeyz Iipef Ten Brušenje dvo- in trorezilnih orodij, svedri do premera 50 mm. Na voljo je podrobna dokumentacija in navodila. Zelo vsestranski brusilni stroj, pripravljen za uporabo.

Stanje: rabljeno, največja dovoljena obremenitev: 28.600 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2005, naslednji pregled (TÜV): 03/2026, dolžina tovornega prostora: 7.520 mm, širina tovornega prostora: 23.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 26 m³, skupna širina: 2.550 mm, skupna višina: 3.150 mm, Oprema: ABS, ----* Aluminium half-pipe body * Platform with rolling tarpaulin * ALCOA LM rims * Underrun protection (foldable) ----* 1st axle liftable * Wabco Trailer EBS * BPW ECO Plus axles * Disc brakes * Air suspension ----* Tyre size: 385/65R22.5 Hodpfey Hn N Tox Af Ton * Technical gross weight: 34,000 kg * Unladen weight: 5,400 kg * Total length: 8,600 mm * Safety inspection due: 09/2026 ----Vehicle is not equipped with a landing leg!! ----Vehicle number: 11903----Subject to errors and prior sale----Advertising and various lettering have been digitally removed. -----We are happy to assist you with all formalities related to purchasing a vehicle. Simply inform us of your requirements and suggestions, and we will take care of everything. Among other things, we can offer the following services at an additional charge: ----Trade-in of your used vehicle TÜV/safety inspection approval Complete export processing Arrangement of financing Application for export license plates Vehicle transfer Vehicle registration Recoveries and vehicle transport-----YOUR VTS TEAM

Stanje: rabljeno, največja dovoljena obremenitev: 28.600 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2005, naslednji pregled (TÜV): 03/2026, dolžina tovornega prostora: 7.520 mm, širina tovornega prostora: 23.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 26 m³, skupna širina: 2.550 mm, skupna višina: 3.150 mm, Oprema: ABS, ----* Aluminium side tipping body * Platform with rolling tarpaulin * ALCOA LM rims * Foldable underrun protection ----* 1st axle liftable * Wabco Trailer EBS * BPW ECO Plus axles * Disc brakes * Air suspension ----* Tyre size: 385/65R22.5 * Technical gross weight: 34,000 kg * Unladen weight: 5,400 kg * Total length: 8,600 mm * Next safety inspection (SP) due: 09/2026 ----The vehicle is not equipped with a support leg!! ----Vehicle number: 11882----Errors and prior sale excepted----Advertising and various inscriptions have been digitally removed. -----We are happy to assist you with all formalities arising from the purchase of a vehicle. Simply let us know your wishes and suggestions and we will take care of them. Among other things, we can offer you the following services at extra cost: ----Trade-in of your old vehicle TÜV/SP inspection Complete export handling Arrangement of financing Application for export license plates Hedpfxjy Hn Ngs Af Tsn Vehicle transport Vehicle registration Recovery and vehicle transport ----Your VTS Team

Stanje: pripravljen za uporabo (rabljen), Lifting capacity: 50 t Distance between lifting hooks: 5500 mm Lug sides for double and single hooks, hook opening: 100 mm Swivel and rotatable central hook with a latch opening: 200 mm Hedpfx Afsgzpv Aj Tsn Height between attachment points and load hooks: Space requirement: 6000 x 750 x 590 mm (without hooks) Weight: 3280 kg

Stanje: pripravljen za uporabo (rabljen), Load capacity: 50 t Hook spacing: 5,500 mm Hedpfxjgzpwgo Af Ton Attachment sides for double and single hooks, hook opening: 100 mm Swiveling and rotating central hook with attachment opening: 200 mm Height between attachment eyes and load hook: Required space: 6,000 x 750 x 590 mm (without hooks) Weight: 3,280 kg

Stanje: skoraj kot novo (rabljeno), Range (depending on lighting conditions): up to 15 m Hjdpfsd Ecncex Af Ton Range with laser receiver: 30 m or more Leveling accuracy over 5 m: +/- 1 mm Self-leveling range: 4° ± 0.5° Horizontal line accuracy at 5 m: ± 1.5 mm Vertical line accuracy at 3 m: ± 0.75 mm Number of laser lines: 2 Weight: 485 g

Stanje: novo, Abrasive belts for belt grinding machines with belt dimensions 150 x 2000 mm Grit 80, 44 pieces Grit 60, 35 pieces Grit 36, 12 pieces Hjdpfx Afec Rf S As Ten Prices on request!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, skupna masa: 30.000 kg, premer rotorja: 800 mm, dolžina rotorja: 1.200 mm, moč: 250 kW (339,91 KM), Univerzalni granulartor, udarni granulartor, Pogonska moč: 250 kW, nadzorna omarica s stikalom zvezda-trikot Dolžina rotorja: 1200 mm, Premer rotorja: 800 mm, Število nožev na rotorju: 36 kos, Število nožev na statorju: 4 x 6 kos, 2 hidravlično vrtljiva statorja z vsak po 2 vrstama protinožev, Hidravlični potiskalnik, Nadzor temperature ležajev, Centralno mazanje ležajev rotorja, Lastna teža: 29.800 kg, Leto izdelave: 2005, obnovljen leta 2025, vse obrabljive dele so bile zamenjane. Hsdpfsxiw Hwox Af Tsn Odlično stanje, takoj pripravljen za uporabo.

Stanje: dober (rabljeno), Radialni ventilator, puhalo za odsesavanje prahu, ventilator, odsesavanje, puhalo za prah Hsdpjb Ilxdefx Af Ton - Moč motorja: 3,6 kW - Število obratov: 1440 /min - Volumenski pretok: cca 6000 m³/h - Priključek vhod: Ø 450 mm - Priključek izhod: Ø 450 mm - Rotor: Ø 670 mm - Količina: 1x na voljo - Dimenzije: 1200/1100/V1350 mm - Teža: 242 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, številka stroja/vozila: 241.371, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 4.700 h, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 46 A, vhodna frekvenca: 50 Hz, največja višina reza: 80 mm, največja širina rezanja: 5.800 mm, premer žaginega lista: 350 mm, izvrtina žagine plošče: 30 mm, skupna dolžina: 7.300 mm, skupna širina: 7.600 mm, višina mize: 970 mm, leto zadnje generalne obnove: 2025, dolžina plošče: 7.300 mm, širina platforme: 5.800 mm, Oprema: CE označba, dokumentacija / priročnik, dozator, Electrical connected load: approx. 25 kW Voltage and frequency: 400 V / 50 Hz Mains system: TN system, with earthed neutral point Operating pressure: 6 bar overpressure Compressed air volume at operating pressure: approx. 143 l/min Compressed air volume at standard pressure (1 bar): approx. 1000 l/min Extraction connection – pressure beam – longitudinal saw: 2 x Ø 120 mm Extraction connection – chip duct – longitudinal saw: 1 x Ø 100 mm Extraction connection – angle fence – longitudinal saw: 1 x Ø 80 mm Required extraction velocity: 25 m/s Extraction volume: 3190 m³/h Required negative pressure at extraction ports: 2500 Pascal Nominal cutting length on saw machine 580: 5800 mm Maximum saw blade diameter (S): 350 mm Scoring unit saw blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Maximum clamp opening (K): 90 mm Maximum stack height (P): (including total of all shaft heights and total of all maximum board thickness tolerances) 80 mm Minimum board thickness or stack height (P): (when using a strip aligner) 6 mm Minimum aligning force of strip aligner: 400 N / unit Hjdpoytfxwofx Af Ten Maximum aligning force of strip aligner: 2000 N / unit Working height longitudinal saw: 970 mm Overall height: 2070 mm Main saw motor power: 15 kW Saw unit forward feed speed: 5 to 120 m/min Saw unit return speed: 120 m/min Longitudinal saw return feed speed: up to 80 m/min