Lecitrailer Polpriklopnik Z Nizko Nakladalno Ploščadjo nakup rabljenega (49.147)

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks Iedpfx Aotx Nwnel Njtf * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: novo, največja dovoljena obremenitev: 91.640 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.850 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Gooseneck * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Bogie * Hook connection front and rear, length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Excavator Deck * Telescopic excavator deck BB-A with drive-over deck hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 430 mm, beam width: approx. 1,350 mm * Load height approx. 580 mm with ground clearance approx. 150 mm 5-Axle Rear Bogie * Mechanical pin-lug coupling for attaching a lowbed at the front, end traverse at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * 3-axle pendulum axle Front Bogie * PENDULUM AXLE, all axles hydro-mechanically force-steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and retaining pins for securing in lifted position Itsdpfx Alsuvbdte Nof * Final coating of axles with 2 coats of 2C paint, solid colour in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tyres front bogie: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J, pendulum axle 5-Axle Rear Bogie * PENDULUM AXLE, all axles hydro-mechanically force-steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and retaining pins for securing in lifted position * Final coating of axles with 2 coats of 2C paint, solid colour in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tyres rear bogie: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) guaranteeing optimal corrosion protection * Final coating with 2 coats of 2K paint, solid colour in RAL 3002 Carmine Red, according to RAL system 841GL. Rims in silver grey Incl. Accessories * Steel front wall, approx. 400 mm high * Detachable ALU sideboards and tailboard, approx. 400 mm high, anodized, for installation on the gooseneck * 3.5" kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on the gooseneck * BEKA-MAX central lubrication for a 3-axle chassis * One 7-pin socket left and right at the rear of the front bogie for warning plates * Screw-in option (ø approx. 40 mm) every approx. 500 mm on the upper flange of the outer tube of the excavator deck for lashing rings (LC 16,000 daN) * Folding extensions with steel mattress, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * The steel mats can be inserted in 2 positions to create a lowered loading area. Please refer to the respective load diagram for the load capacity, depending on extension width * Steel mats with rubber covering approx. 12 mm thick * One 7-pin socket left and right, front and rear on the rear bogie for warning plates * BEKA-MAX central lubrication for a 5-axle chassis * Rear bogie with socket for cable remote control for steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder

Stanje: novo, največja dovoljena obremenitev: 45.250 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Our entire range of vehicles, including immediately and short-term available units, can be found on our website. Excerpt from the equipment list. Full equipment details available upon request. Chassis, cranked: * Special steel frame made of high-strength fine-grain steels, electrically welded at connection points * Well-dimensioned outer frame, 4-axle configuration * Wheel coverings above the axles with spray mist suppression * All steel parts shot-blasted * Side underride guard made of anodised aluminium, installed * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special configuration in the cranked area for maximum low bed length, combined with AluLeg drop-down supports instead of telescopic support winches, maximum rear swing radius of the tractor unit approx. 2,100 mm Special body with rear stanchion extension: * DINKEL special body construction * Self-supporting aluminium roof rail/profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stanchions can be extended for loading and unloading to approx. 4,200 mm * Three sliding stanchions per side with spring-assisted lifting * Additional central stanchion locks in the roof rail and parked position by pull cable and spring bolt * DINKEL mechanical lift roof, height-adjustable * Lift roof height approx. 400 mm, operable on both sides or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments, with adjustment in the stanchions * Front cover at the bulkhead for driving under tarp, total height up to approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminium slats on the side, lower 450 mm pockets, above that 4 rows of individual pockets. In the raised bed, only 3 rows of plug-in slats, with uniform spacing Floor: * Approx. 27 mm special waterproof bonded beech plywood, slip-resistant surface * Steel sheet in wheel arch areas, forklift-rated to DIN standard * Outer frame with flush surface Brakes: * WABCO air brake system with EBS according to EC regulation 71/320 EEC incl. PREV (parking-release safety valve) * Spring-loaded brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator * Incl. WABCO tire pressure monitoring system Axles: * 4 x 10,000 kg SAF with drum brakes in low-bed configuration * Air suspension with lifting and lowering system, total travel approx. 230 mm * Third and fourth axle as friction-steered trailing axles with electric and mechanical locking Twin tyres: * 235/75 R 17.5, 16-ply. Brand of our choice, incl. spare wheel holder * without spare wheel Lighting: * As per EC regulation, incl. LED side marker lights * Position lamps in LED design Itodowx Dbiopfx Al Nof * 2 additional reversing lights * 2 work lights in the front wall, inside, at the top Paintwork: * Chassis and body in single colour RAL 3002 Carmine Red * Central stanchions, axles KTL coated black * Corner stanchions hot-dip galvanized * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver Special equipment included: * 15-pin electrical supply line * Air suspension in ECAS version, operation on the trailer * Oversize signage at front and rear in galvanized, continuously telescopic version with mounted contour lights including plug bases for beacon lights (small panels) * Additional external unlocking for sliding roof frame * 4 stanchion adapters for special outer frame profile, to lock central stanchions as required * PVC sliding tarpaulins, colour similar

Stanje: novo, največja dovoljena obremenitev: 38.140 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Approx. 30 mm thick hardwood flooring Loading platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece, removable, galvanized cover over the wheel recesses (W approx. 670 mm – max. point load 5 t / each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - 235/75 R17.5 3PMSF tyres, manufacturer of our choice - TPMS – Tire Pressure Monitoring System according to ECE R 141 - Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992 - The tractor unit must be capable of transmitting and displaying these data for correct indication. Axles: - BPW axles and suspension, 2 axles fixed, 3rd axle trailing steer - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicators - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: - Steel construction made from high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with shot-blast machine after welding - Second blasting with corundum for optimal coating adhesion Iodpfew Tpq Dex Al Njtf - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% Zinc / 15% Aluminum) to ensure best corrosion protection - Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavities sealed with special wax Including the following accessories: - On both the gooseneck and at the rear left and right, one holder for warning boards, including socket - Spare wheel holder in front of the bulkhead (without spare wheel) - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized connection panel at the front - Galvanized folding supports under the rear slope of the loading platform - Hardwood rear impact protection from gooseneck rear wall to loading platform - 1 pair of recessed lashing rings along the central frame at the rear in the slope (LC 10,000 daN) - On the gooseneck, aluminum side and rear walls

Stanje: rabljeno, največja dovoljena obremenitev: 51.870 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete stock of vehicles, including those available immediately and at short notice, can be found on our website. Extract from the equipment. Full equipment details available upon request. GOOSENECK - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with 1,000 mm x 10° bevel Ijdpfx Aoxtc Uhol Njtf - Suitable for tractor units: 4x2, 6x2, and 6x4 - Removable steel front wall, approx. 400 mm high - Yellow-red air couplings on the front connector strip - ASPÖCK UNIBOX on the front connector strip with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic unit for hydraulic control - Outer beams of the gooseneck with mounting holes for bolt-on lashing rings - One mounting hole at the upper rear of the gooseneck outer beams for a bolt-on lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - On the gooseneck, 1 pair of plug-in aluminum sideboards, approx. 400 mm high, anodized finish - On the gooseneck, one plug-in aluminum rear board, approx. 400 mm high, anodized finish - Approx. 40 mm thick hardwood flooring above the gooseneck - 2-inch kingpin - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - Rear mount on gooseneck for aluminum drive-on ramps - Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOADING PLATFORM - Extendable loading platform, approx. 8,800 mm long, rear with 500 mm x 10° bevel - Recess in the loading platform and the bevel to accommodate excavator dipper arm, approx. 2,490 x 750 x 210/290 mm (L x W x H) - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension - 1st and 2nd axles fixed, 3rd and 4th axles steering trailing axles - 3rd and 4th axles with electro-magnetic reverse lock, activating via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with raising/lowering valve - 235/75 R 17.5 3PMSF twin tires - Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load: approx. 50,000 kg - Continuous and inter-axle interrupted approx. 50 mm thick hardwood flooring on the loading platform (increased friction coefficient) - Loading platform locking using conically welded locking profiles every approx. 250 mm - Slotted holes for attachable and repositionable bridging elements at the front of the platform - Intermediate platform with offset surface, approx. 300 mm wide, for the large cross-section sliding tube with sheet covering – front and rear with slotted holes for attachable and repositionable bridging elements – removable panel flush with the loading platform - 1 pair of lashing rings on the front cross member (LC 10,000 daN) - 6 pairs of recessed lashing rings in the outer frame, foldable outwards (LC 10,000 daN) - Additionally, 1 pair of external lashing rings on the front cross member, rotated approx. 90° inwards to the platform (LC 10,000 daN) - Extendable (galvanized) extensions, approx. 230 mm per side - 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in the platform before the 1st axle, wheel recesses with sheet covering and square climbing strips of approx. 15 x 15 mm, each approx. 200 mm - Between 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split lengthwise, with wood overlay, external plug-in mounting

Stanje: novo, največja dovoljena obremenitev: 33.865 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Our complete vehicle inventory with immediately and soon available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. Gooseneck * Gooseneck with chamfered front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading Area * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood floor approx. 48 mm thick, chequered plate overlay above axles * Cut-outs in the loading area outer frame for attaching tension belts (LC 2,000 daN) Axles * BPW axles and suspension, all axles hydro-mechanically steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tools Tyres: * 245/70 R 17.5, load index (146/146 F) * Make of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox, lifting capacity approx. 24 t (approx. 50 t tested capacity) Brake system: * Brake system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Paint finish: First class and durable corrosion protection * High-quality two-component (2K) single-colour top coat in RAL 3002 carmine red. * Rear section metallised and painted in RAL 9010 (pure white) Steel construction: Steel structure made of high-strength fine-grained steels. * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets, connection as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin Ijdsw Tprzepfx Al Njtf * Hot-dip galvanised steel bulkhead, approx. 400 mm high * Yellow-red air couplings on the galvanised front terminal strip * Spare wheel carrier in front of the bulkhead * Electro-hydraulic power unit * Remote steering front and rear via cable remote control with push buttons, includes axle tracking control (without installation in tractor unit) * Recess at the rear of the gooseneck for aluminium approach ramps * Anchor rail for aluminium approach ramps at the rear of the vehicle * Galvanised folding supports under the loading area rear chamfer * Aluminium drop sides and rear board on the gooseneck, plug-in, approx. 2,440 x 400 mm (L x H) * Rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * One galvanised toolbox integrated in the chamfered gooseneck * 4 pairs of WADER container locks in the loading area for a 20', 2x 20', 40' or 45' container * 8 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the loading area outer frame * Galvanised extensions, extendable by approx. 230 mm per side * Sliding anchor rails for aluminium approach ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, using standard NLGI-2 grease and removable pump protection * 2 LED reversing lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation), complete steel structure shot-peened to SA2.5–SA3, then wit

Stanje: novo, največja dovoljena obremenitev: 37.680 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire range of vehicles, including immediately and short-term available units, on our website. Excerpt from the specification. Full specification available on request. Gooseneck * With approx. 30 mm thick hardwood flooring; gooseneck in straight design at the rear * 3 pairs of lashing rings (LC 5,000 daN) Loading Platform * Extendable version * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading deck for attaching tension belts (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Legs * JOST mechanical landing legs with 2-speed gearbox for lifting capacity approx. 24 t (test load approx. 50 t) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle rigid, remaining axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M), no interconnection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc-rich primer * High-quality two-component (2K) topcoat, single-colour RAL 3002 carmine red * Wheels painted silver Included Accessories * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanised front connection strip * 4 chocks with holders mounted on the front wall * Spare wheel holder in front of front wall * Electro-hydraulic unit * Remote rear- and front axle steering via cable remote control with push buttons, includes single-track monitoring for axles (no installation in the tractor unit required) * European reflector boards (red-yellow) at rear of trailer * Yellow reflective tape complying with EU regulations on the sides, extension and rear * On gooseneck and rear plate—left and right—each with holder for warning boards including connector * Mount for rotating beacon at the rear of the trailer * Galvanized folding supports below the bevel of the loading platform Itedpfx Alov Etx Ee Nef * Axle load pressure gauge including axle-load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the platform, 1x 40' container above the gooseneck, or 2x 20' containers * Support bracket with 1 pair of WADER container pockets, kingpin load approx. 20,000 kg * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm at the outer frame of the load platform * Galvanized extensions, extendable by approx. 230 mm per side * Movable hook-in rails for aluminium drive-on ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable guard for the pump * 2 LED reversing lights mounted at the rear * Acoustic reverse warning signal * HRM metallisation (High Resistance Metallisation)

Stanje: novo, največja dovoljena obremenitev: 39.720 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including immediately and short-term available units, can be found on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * With beveled front corners, approx. 45°, and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area * Extendable loading area version * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of lashing rings laid flat at the front of the loading area (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing legs * JOST (mechanical) with two-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles * BPW axles, two fixed, two self-steering, with drum brakes * Air suspension with raise/lower function * Self-steering axle with electromagnetic reverse lock, activated by reverse gear or manually * Tyres: 205/65 R 17.5 Braking system * Wabco braking system meeting EU regulations with EBS-E (4S3M), without interconnection lines to the tractor unit Steel Construction * Made from high-tensile fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, long-lasting corrosion protection for the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer * High-grade, single-color two-component (2K) topcoat in RAL 3002 Carmine Red * Rear section metallized and finished in RAL 9010 (Pure White) * Wheels in silver Accessories included * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on galvanized front connection rail * 4 wheel chocks with holder on the front wall * Rear section of the gooseneck with mounting for aluminium ramps * Galvanized folding supports under the rear bevel of the loading area * Bracket for a beacon on the trailer’s rear * Yellow reflective tape on the sides, extension, and rear, in compliance with EU regulations * Holders for warning signs with socket on left and right of gooseneck and rear panel * TPMS tire pressure monitoring system according to ECE R 141. Data transfer to the towing vehicle is via the standardized EBS interface per ISO 11992; for correct display the towing vehicle must be able to receive and display the data * On the gooseneck: clip-on aluminium side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * One galvanized toolbox integrated into the beveled gooseneck * 6 pairs of WADER container pockets in loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Sliding brackets for aluminium ramps at the vehicle’s rear * 7 pairs of stake pockets for removable stakes, approx. 100 x 50 mm in the outer frame of the loading area * One galvanized transverse holder under the loading area * Galvanized, extendable outriggers for widening by approx. 230 mm per side * Lift axle on the front axle controlled by TEBS E depending on current axle load and loading condition Itsdpfxsu Sd U Us Al Nef * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Stanje: rabljeno, največja dovoljena obremenitev: 31.300 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2019, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.050 mm, skupna širina: 2.550 mm, Oprema: ABS, Meusburger MPG-3 Nizkopodnožno prikolica s ponjavo, krmiljena/dvigljiva os Oprema: zračno vzmetenje * Tehtnica za os * 1. os dvigljiva * 3. os krmiljena * Hidravlična rampa z dodatno podporo in daljinskim upravljanjem * Prehodna rampa Ijdpfx Ajwfwd Del Netf * Električni vitel z daljinskim upravljanjem * Edscha streha * Stranski zaboji za shranjevanje * Rezervno kolo s standardno pnevmatiko * Dodatni žarometi * Izvlečne table za izredne širine Varnost: ABS * EBS * Kolutne zavore Pridržujemo si pravico do napak in predhodne prodaje. Interna številka vozila: 8303

Stanje: rabljeno, največja dovoljena obremenitev: 26.240 kg, skupna masa: 36.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2008, dolžina tovornega prostora: 10.819 mm, Oprema: ABS, Proizvajalec: B-XL Itedpfx Aovl Dkrsl Nsf Model: 4,5 m, 2-osna razširitev Leto: 2008 Stanje: dobro Serijska številka: WKVDAS00200021091 Referenčna številka: 7721 Datum registracije: 27.10.2008 Bobnasta zavora: ? ABS: ? Zadnje preme: SAF Vzmetenje: zračno Velikost pnevmatik: 245/70R17,5 Preostala profilna pokritost: 40–40 % Skupna masa: 36.000 kg Lastna masa: 9.760 kg Krmiljena zadnja os: ?

Stanje: rabljeno, lastna masa: 6.560 kg, največja dovoljena obremenitev: 18.440 kg, skupna masa: 25.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2017, dolžina tovornega prostora: 13.700 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, medosna razdalja: 7.500 mm, barva: modra, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, dodatne luči, zavorni sistem na stisnjen zrak, * German semi-trailer * Very good visual condition, see photos * 2-axle low loader, Jumbo TO 152 DE Itodpfoxu Nnwsx Al Nef * Loading platform: length 13,700 mm x width 2,540 mm * Loading height approx. 850 mm * Stake pockets * Multilock system * Wooden loading floor * Winch with cable remote control 15,000 lbs * Long aluminium loading ramps 3,000 x 400 mm, laterally adjustable * ROR axles * Air suspension * Haacon spindle supports * ABS + EBS * Work lights * Spare wheel * Toolbox * Brake drums * Wheelbase: 7,500 mm + 1,250 mm * Permissible gross weight up to 27,200 kg * Unladen weight 6,560 kg * Payload up to 20,640 kg If a new TÜV inspection is required, we are happy to provide an offer through our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to ensure there are no misunderstandings regarding condition and suitability. Inspection and viewing are possible at any time by prior appointment and are expressly desired. All information is provided without guarantee. We accept no liability for errors or inaccuracies in the offer. The buyer is obliged to independently inspect the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Stanje: rabljeno, lastna masa: 9.600 kg, največja dovoljena obremenitev: 38.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2012, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, barva: srebrn, Leto izdelave: 2009, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, * German trailer * 1st owner * Condition as shown in photos * Low-loader Goldhofer, type STN-L3-39/80 * 3-axle low-loader with extra-long ramps * Ramps hydraulically and laterally adjustable * Loading length: 8.80 m x 2.50 m * Loading height: 0.85 m * SKF axles * 2 support legs * Steerable trailing axle * Leaf/air suspension with lift/lower function * Heavy-duty lashing eyes according to DIN * EBS (Electronic Braking System) * ABS (Anti-lock Braking System) * Tool/storage box * Twin tyres * Gross vehicle weight possible: 48,000 kg * Unladen weight: 9,600 kg * Payload: 38,400 kg If you require a new TÜV inspection, we are happy to provide an offer from one of our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You will find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and assessment of the goods, so that the buyer has a realistic understanding of condition and suitability. Viewing and inspection are possible at any time by appointment and are explicitly encouraged. All information provided without guarantee. We accept no liability for errors or incorrect details in the offer. The buyer is obliged to independently verify the condition and specification of the goods/vehicles. Itsdpswxm Ilefx Al Nef Subject to change, prior sale, and errors.

Stanje: rabljeno, največja dovoljena obremenitev: 42.400 kg, skupna masa: 64.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2011, Oprema: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 – Height-Adjustable Lowbed with Removable Gooseneck --- Manufacturer: Goldhofer Model: STZ-VLS4-37/80 First registration: 01/2011 Colour: Yellow Gross weight: 64,000 kg Unladen weight (as per vehicle registration): 21,600 kg Axles: 4x BPW axles; 1st axle steered via turntable steering, remaining 3 axles are hydromechanical forced steering Steering axles up to max. 45 degrees Tyres: 235/75 R17.5, approx. 70% tread Suspension: Air suspension with lift and lower function EBS Wabco Removable gooseneck with aluminium sideboards Hydraulic cylinders for support on the tractor unit Toolbox with lid at the front of the gooseneck Operation and pressure gauge on left side of gooseneck Gooseneck designed for free-rotating 1-axle dollies Lowbed hydraulically height-adjustable to chassis Chassis with excavator trough (starts from 2nd axle) Extendable load area widening: 440mm (2x 220mm) and 700mm (2x 350mm) Timber planks to bridge between widenings Air suspension with minimum lift/lower range 825mm to 1,025mm (not in driving position) 2x fixed ride heights: * 1st ride height: 925mm +100mm/-100mm * 2nd ride height: 885mm +100mm/-100mm 2 pairs of retractable lashing rings in gooseneck floor 5 pairs of retractable lashing rings in lowbed floor 5 pairs of side lashing rings on lowbed chassis 4 pairs of stake pockets in lowbed floor 3 pairs of retractable lashing rings in chassis floor 2 pairs of side lashing rings on chassis 2 pairs of stake pockets in chassis floor 2x lashing rings in excavator trough Rear of vehicle tapered at 10 degrees One-piece hydraulic ramps (2,850mm x 720mm) and hydraulic rear supports Operation for hydraulic ramps and rear supports on left side Smartboard at rear right Additional LED reversing lights on the gooseneck and at the rear of the trailer First owner German vehicle!! German documents!! First owner!! --- Goldhofer SX 1-25/80 Dolly --- Manufacturer: Goldhofer Model: SX 1-25/80 First registration: 03/2011 Colour: Yellow Gross weight: 28,000 kg Unladen weight (as per vehicle registration): 2,750 kg Axles: 1x BPW axle Tyres: 235/75 R17.5, approx. 70% tread, twin wheels 3" fifth wheel plate Single mudguard Landing legs Load pressure gauge First owner Isdpfex Suzajx Al Netf German vehicle!! German documents!!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Oprema: ABS, EBS (Elektronski zavorni sistem), 2+1 osna platformna prikolica Isdpfx Alsyaxtho Notf

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, BERTOJA SEMITRAILER 13.80m BRAND NEW, READY FOR REGISTRATION Galvanised double hydraulic ramp Protective sideboard on neck Winch preparation Self-steering axle CONTACT: 0823 1686306 335 6713062 Ijdpfsxpi A Rex Al Netf OPENING HOURS: MONDAY-FRIDAY 8:30am–7:00pm - SATURDAY 8:30am–2:00pm WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL & INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semitrailer - Refrigerated Tanker Semitrailer – Lamberet - Schmitz Isuzu - Fixed Platform - Crane - Tipper - 4 Axles - Rear 4 Axles - Tway-T-Way-540-460 HP - Xway-X-Way-Trilateral - V8 - Scania - Frost Edition Curtain Sider - Box Body - Tailgate Loader - Refrigerated Case - Insulated with Fridge - Van Domenico Truck srl accepts no liability for any discrepancies in technical data, fittings, or features, which may differ from those described. We recommend verifying the features of each specific vehicle.

Stanje: rabljeno, lastna masa: 6.720 kg, skupna masa: 35.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2010, dolžina tovornega prostora: 12.500 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 425/65 R22,5, medosna razdalja: 2.000 mm, Oprema: ABS, Colour: RAL 6416 turquoise green Itjdpfx Aloww Ixce Nof EBS (Electronic Braking System) Disc brakes Payload: 28,280 kg BPW axles: 2 x 10,000 kg, both with forced steering Lifting and lowering device Fixed underrun protection 10 pairs of stake pockets Aluminium floor 2 pairs of container locks Subject to errors and omissions.

Stanje: rabljeno, največja dovoljena obremenitev: 21.320 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, dolžina tovornega prostora: 13.550 mm, višina nakladalnega prostora: 800 mm, Leto izdelave: 2022,

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), TIMA ALL-ALUMINUM universal transporter with tiltable loading platform Type: GTAHK 360/188/3.5 Internal dimensions: 3500x1880x300 mm Gross weight: 3500 kg Payload: 2800 kg Unladen weight: 700 kg Tyres: 155/70 R12C Year of manufacture: 2011 Technical inspection valid until 07/2022 Iodpfx Aehwmr Hel Notf ALL-ALUMINUM trailer with tiltable loading platform Chassis welded in hollow profile design Aluminum plank floor Double-acting hydraulic cylinder for tilting function Spare wheel mounted 8 lashing rings

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.817 kg, največja dovoljena obremenitev: 32.183 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 11/2015, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385 65 r22,5, stanje pnevmatik: 90 odstotek, Leto izdelave: 2015, Oprema: ABS, dvižna zadnja plošča, Polpriklopnik je pripravljen za uporabo. Podzložljiva nakladalna ploščad 2,0 t. 6 novih pnevmatik. Različne shranjevalne omarice, na obeh straneh. Sledi uporabe, glejte slike. Lokacija: 13089 Berlin. Itsdpex Rupbjfx Al Njf

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.800 kg, največja dovoljena obremenitev: 25.500 kg, skupna masa: 36.800 kg, konfiguracija osi: 3 osi, prva registracija: 10/1998, dolžina tovornega prostora: 13.300 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 450 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: rdeča, Leto izdelave: 1998, Oprema: ABS, Bertoja extendable low loader, 3 axles with 2nd and 3rd self-steering axles, air suspension, ABS, year 1998, cradle length 5.30m with an additional 3.50m extension, ground clearance 45cm, removable module above the axles, adjustable detachable gooseneck, wired remote control for steering self-steering axles, good condition. DEALER: INTERDRIVE SRL - PARMA. Itodswg E Rbopfx Al Njf

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 13.000 kg, največja dovoljena obremenitev: 37.100 kg, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, prva registracija: 07/1995, dolžina tovornega prostora: 13.300 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 450 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: modra, Leto izdelave: 1995, Oprema: ABS, extendable low-loader De Angelis, year 1995, payload up to 37 tons, 3 axles with air suspension, ABS, 2nd and 3rd axles steering, extendable chassis with a central extension of additional 3.50 m, closed well (culla) 5.0 m, height from ground 44 cm, removable cover above axles, manual rear ramps, good condition, DEALER: INTERDRIVE SRL – PARMA Itodpfx Aowa T T Rjl Njf

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.200 kg, največja dovoljena obremenitev: 31.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2019, dolžina tovornega prostora: 13.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 800 mm, vzmetenje: zrak, velikost pnevmatike: 235.75 r 17.5, barva: prometno oranžna, Leto izdelave: 2019, Oprema: ABS, Rabljen polpriklopnik nizkopodni Moeslin, gosji vrat, rampe, 3 osi (tretja vodilna), zračno vzmetenje, EBS, priprava za pomične zadnje rampe, sprednja glava 120 cm, bočni kavlji Rud 5 ton, twist lock za kontejnerje 20+20, 40 in 45 čevljev, 3 prečne ojačitve za nosilce, 2 PVC orodjarni, višina od tal 84 cm, letnik 2019, na voljo pri trgovcu INTERDRIVE SRL-PARMA. Iedpjxnqvcefx Al Njtf

Stanje: rabljeno, lastna masa: 6.640 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2007, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 385/65 R22,5, medosna razdalja: 1.310 mm, barva: rumena, Oprema: ABS, EBS Kolutna zavora Nosilnost 29.360 kg Zračno vzmetenje z dvigom in spustom Itodpexnz Ehefx Al Nsf BPW osi Alcoa aluminijasta platišča Dvigalna in spuščalna naprava Možni so zapisi z napakami

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014232, lastna masa: 5.900 kg, največja dovoljena obremenitev: 29.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2026, dolžina tovornega prostora: 13.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.638 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, barva: drugo, Leto izdelave: 2025, Chassis Semi Logistics Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin. Driveable and load-bearing for construction/agricultural machinery up to max. 24,000 kg GVW and up to a maximum machine width of 2,480 mm (the track width of the construction machinery or vehicles to be transported must not exceed 2,200 mm). Rear hook bar for aluminium ramps (wider construction/agricultural machinery is not permitted for loading). Outer frame slightly inclined, new version with "Load-Lock profile" for attaching lashing straps. 14 pairs of recessed lashing rings in the outer frame, each 2.5 t 6 pairs of recessed lashing rings in the outer frame, each 5 t 24 t, two-speed landing gear, single-sided operation, with straight baseplate, without load compensation Free landing leg dimension or free swing radius at rear approx. 1,920 mm Foldable rear support 2x wheel chocks with holder Side impact guard in aluminium Underrun protection in steel Quarter-shell mudguards in front of and behind each axle With anti-spray mudflaps behind each axle 1x spare wheel holder for 1 electronic spare wheel, with wheel fixing kit 1x spare wheel, same make as standard tyres, steel rim Axles & Suspension SAF drum brake axles "Axle/chassis laser alignment" – reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, additionally electrically controllable from the truck, including forced lowering and traction aid, without truck installation (traction aid functional up to axle load exceedance of 30% and up to a speed of max. 25 km/h) Brake System Iodpjxb D Swofx Al Netf 2-line compressed air brake system Colour-coded piping for easy servicing Spring-loaded parking brake 2 coded coupling heads at the front, without connection line 24 Volt EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With raise & lower valve Vehicle stability control system "TPMS" tyre pressure monitoring system according to ECE R 141, display via the towing vehicle’s monitor, via EBS, without truck installation. (This requires preinstallation in the truck. Only available for standard tyres) Wheels and Tyres 12x 235/75 R17.5 Dual wheels 12x steel rims, factory silver Electrics 24 volt, multi-chamber lights, side-mounted yellow LED lighting Side yellow LED lighting with indicator coupling “flashing side marker lights” 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin coded sockets at the front, without connection cable Floor Anti-slip phenolic plywood panels approx. 30 mm thick, for high point loads, suitable for forklift axle load up to max. 5,600 kg Front wall / front corner posts 25 mm aluminium hollow profile, 1,350 mm high, steel corner posts in heavy-duty design Front wall additionally lined on the inside with 1,250 mm high phenolic plywood panel

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.500 kg, velikost pnevmatike: 295 60 R 22,5, Leto izdelave: 2026, obratovalna teža: 80.000 kg, model šasije: Lider Heavy-Duty Chassis, Oprema: ABS, TEŽKO NOSILNA NIZKOPODNA PRIKOLICA Lider Trailer za težke prikolice Visokokakovostna in vzdržljiva izdelava EU standardi. Dvojni zaviralni sistemi. Enoletna garancija na proizvodne napake Proizvodnja 2026 Itjdpjrdfabjfx Al Nof Barva po želji kupca.