Klockner 120X400L 2Wt Drobilnik Lesa Drobilnik nakup rabljenega (12.926)

Stanje: dober (rabljeno), Lesni drobilnik na prodaj Pripravljen za transport s transportnim trakom Idealen za drobljenje ostankov lesa (vse vrste mehkega lesa) in palet Vključno s hidravličnim potisnikom Motor: 7,5 kW Širina rotorja: cca 82 cm Teža: 1.460 kilogramov Redsxbyx Tjpfx Apbsu Polna obremenitvena toka: 32 A Predvarovalka: 35 A

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine with special rotor available immediately Advantages: + special rotor with reduced knife overhang + 22 kW motor + efficient square knives *For pallets: up to 10 pallets per hour *Depending on screen and material. Significantly more for smaller wood off-cuts. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm Hydraulically operated pusher Screen perforation currently (15/20 mm) *can be exchanged Suction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Plant color may vary Weight: 1920 kg Standard features: - Control cabinet with PLC control - Automatic star/delta start-up - Fast hydraulics - Automatic shut-off when rotor runs idle - Rotational speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *See last 2 images. - Additional knife row + €2,790 - Segment floor + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (May be considered for plastic shredding with screens smaller than 15 mm or high fine proportion. Not required if lubricating the bearings with grease every 4 weeks in operation) - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net Rjdpfx Apjdv Eu Hjbsu (Start and stop synchronized with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Feed material must be free from metals and mineral impurities. Damage to the tools and/or increased wear may otherwise result.

Stanje: novo, Leto izdelave: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Blades: multiple cutting edges (reversible) Hydraulically operated pusher Screen perforation size as desired (10–40 mm) Extraction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when the rotor runs idle Rodjd Dgw Uspfx Apbeu - Rotor speed 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE conform The shredder is designed for processing solid wood, chipboard, MDF panels, and other materials upon testing and approval by the manufacturer. Additional shredder options: - Height increase by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Controls for conveyor and overband magnet + €2,750 net (Start and stop synchronized with shredder) Raw material requirements: - Moisture content (atro) must be below 30% - Installation temperature: heated room, minimum +5°C - Metals and mineral contaminants such as sand, stones, etc. increase wear

Stanje: novo, Leto izdelave: 2024, Production time approx. +/- 4 months. The ideal machine, for example, for shredding pallets and wood waste. * prepared for extraction, see pictures 4 and 5 without additional accessories such as -exhibited hopper or -conveyor belt cutout Commodity code: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knives: 76 pieces, reversible multiple times Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 cbm Hydraulically operated pusher Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (LxWxH) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard equipment includes: - V-rotor for maximum throughput - 2nd row of knives on rotor - Control cabinet with Siemens PLC control system - Automatic star/delta start - Fast hydraulic system - Automatic shutdown when rotor is idling - Rotation speed 70-90 rpm for high throughput - Cycle control to avoid idle time - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard and MDF, other materials upon testing and approval by the manufacturer. Requirements for raw material: Rsdpfx Aod Hkqhepbju - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Stanje: dober (rabljeno), Weima WL 4 Leto izdelave: 1999 Rsdpfxozal R Ts Apbeu Širina rotorja: 600 mm Število gredi: 1 Glavni motor: 18,5 kW

Stanje: rabljeno, Leto izdelave: 1991, Used machine Year of manufacture: 1991 Equipment and technical data: - Fully installed dryer with carriage, high-performance radial fan, electric heating - Supply and exhaust air flaps, safety thermostat, spray device - Swing lift door for convenient opening and closing of the dryer - Interior lining: all side walls are made of seawater-resistant special aluminium - The stainless steel floors are permanently resistant to aggressive wood components such as tannic acid, etc. - The sealing of the connecting joints is absolutely resistant and also allows for steaming in the system - Stack dimensions: 530 x 105 x 115 cm - Stack volume: 6.4 m³ - External dimensions: 690 x 176 x 140 cm - Heating: 12 kW - Motor: 1.1 kW / 400 V Redoy R Ha Sopfx Apbeu - With MP 902 controller Availability: short-term Location: 63934 Röllbach

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Vecoplan VTH 55/25/5 industrijski drobilnik/mlin naprodaj! -vibracijska miza -detektor kovin -krmilna omara -približno 20 parov nožev -rezervno sito -glavni motor 75 kW Za vsa vprašanja nas kontaktirajte z zaupanjem! Rsdpfoy Ui Tcsx Apbou

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Dimenzije mize: 1400 x 1000 mm Miza se vrti od 0 do 360 stopinj Vreteno: ISO40 Nagibno vreteno Minimalna hitrost vrtenja vretena: 90 1/min Maksimalna hitrost vrtenja vretena: 2880 1/min Višina stroja: 3260 mm Dolžina stroja: 2650 mm Širina stroja: 2600 mm Rjdpfx Aey Iwf Hepbeu Teža stroja: 5100 kg Dodatna oprema, oprema: - Vgrajena rotacijska miza - Hitri pomiki - Motorizirana nastavitev višine - Strojna svetilka Stroj je v zelo dobrem stanju.

Stanje: novo, Leto izdelave: 2026, Technical Data: Mechanism dimensions: 300x250mm Inlet dimensions, upper part: 1393x933mm Machine drive: 2xKW (electric motor) Power transmission: hardened gear drive Number of drive shafts: 2 pcs. Number of blades: 78 pcs. Blade thickness: 6 mm Machine dimensions: 1670x1410x600mm Capacity: 40 kg/h Construction: Solid frame design with intake guaranteeing work safety. Powder coating. Control system: SIEMENS Redog Rci Ispfx Apbju The ZEIGE300 Shredder is a durable and reliable piece of equipment. We have calculated and constructed it to withstand the loads required for shredding plastics and similar materials. Most industrial grinding systems require both a grinding and a granulation phase. Thanks to adjustable screens, the ZEIGE300 shredder can do both! The shredder is also designed for easy cleaning. Very fine shredding is only possible using double-shredding of the same material. The ZEIGE300 shredder can process any plastic of any shape that fits between the blades. We have tested it with HDPE, PP, PET and PS. If a piece of plastic is too thick, the blades will not fragment the material, as the machine is designed to prevent jamming (depending on motor power). PP, HDPE, PS from 0.7 mm to 12 mm have been successfully tested. Films are too thin and slip between the blades. The shredder has not been tested on such materials as rubber, tires, or thermosetting materials. Application: Machines with the ZEIGE dual-shaft mechanism are primarily used for shredding plastics, cardboard, pine boards of small thickness, and cardboard spacer boards. Plastic shredder for various materials. Compact mechanism design based on the Precious Plastics project. Algorithm for automatic reverse operation in the event of machine overload.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 120 h, Funkcionalnost: popolnoma funkcionalen, The Red Rhino 7000 is a mobile (mini) jaw crusher – essentially a self-contained, portable crusher that reduces material using a fixed and a movable jaw. - Crushing principle: Jaw crusher – large, wear-resistant manganese steel jaws. - Feed opening: approx. 700 mm × 400 mm – this is the maximum material size the crusher can accept at once. - Capacity: up to approx. 45 tonnes/hour (depending on material quality). - Power: Diesel engine (e.g. Deutz, approx. 66–70 HP, actual engine may vary by model). - Output size: adjustable from coarse to fine (e.g. 10–120 mm), allowing for variable grain sizes of the crushed material. - Mobility: Tracked or rubber-wheeled chassis → easily maneuverable on site. - Controls: often via radio remote control. What is it used for? - Crushing construction debris - On-site reduction of concrete, reinforced concrete, bricks and stones for reuse or easier handling - Recycling Rsdey It Tgepfx Apbju

Stanje: rabljeno, Twin-shaft shredder Rjdpfxjy Th Nae Apbou Drive power: 37.50 kW

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 4 h, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), skupna masa: 1.200 kg, skupna dolžina: 1.640 mm, skupna širina: 1.200 mm, skupna višina: 1.750 mm, delovna širina: 630 mm, vhodna napetost: 400 V, višina krmilne omare: 200 mm, dolžina elektro omare: 600 mm, širina krmilne omare: 600 mm, število rezil: 15, največja hitrost vrtenja: 100 obr/min, premer rotorja: 260 mm, širina rotorja: 630 mm, perforacija sita: 15 mm, vrsta vhodnega toka: Klimatska naprava, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, Wertstoffzerkleinerer Hacker Holzzerkleinerer Häcksler Shredder MHR630 ecoline Die MHR ecoline sind robuste und energieeffiziente Holzzerkleinerungsmaschinen, die für den zuverlässigen Dauereinsatz im gewerblichen Umfeld entwickelt wurden. Die steckerfertigen Schredder überzeugen durch hohe Leistungsfähigkeit, niedrigen Energiebedarf und ein starkes Preis-Leistungs-Verhältnis. Damit eignen sich die Häcksler ideal für Handwerksbetriebe, Recyclingunternehmen und holzverarbeitende Betriebe, die eine wirtschaftliche und gleichzeitig leistungsstarke Lösung suchen. Vorteile - Kontinuierlicher, gleichmäßiger Zerkleinerungsprozess - inkl. Ecoringe - Hohe Leistungsfähigkeit bei geringem Energieverbrauch - Robuste Bauweise - Größere Zuführöffnung - Starkes Preis-Leistungs-Verhältnis - Steckerfertig (5-poliger CEE-Stecker, 400V, 32A Drehstrom) - Siemens SPS gesteuert Rjdpfx Apjzakyyjbsu - MHR630 ecoline Rößler Wertstoffzerkleinerer "Made in Germany"

Stanje: novo, Še zelo dobro ohranjen štiriosni drobilnik s samo 1200 delovnimi urami. Letnik 1998. Opremljen z 2 motorjema po 7,5 kW. Redpfxey T Hbue Apbsu

Stanje: rabljeno, Shredding machine LINI LW 40 - used - Hydraulic feed, PLC control, ----- Technical Data ----- Hopper opening: 600 x 820 mm, Hopper volume: 0.5 m³, Rotor diameter: 200/250 mm, Rodjwi Stnepfx Apbsu Rotor length: 600 mm, Motor power: 18.5 kW, Weight: 1,050 kg, Dimensions (LxWxH): 2,070 x 1,260 x 1,640 mm, Screen perforation: 15 mm

Stanje: rabljeno, Dolžina rotorja: 1.000 mm Motor: 30 kW Sito: 10 mm Eno-gredni drobilnik Weima tip WL 10 za učinkovito drobljenje lesnih odpadkov, ostankov plošč, palet in masivnega lesa. Robusten stroj je primeren za predelavo odpadnega lesa v mizarskih delavnicah, lesnopredelovalni industriji in reciklažnih obratih. Vključuje velik lijak za enostavno polnjenje in začasno shranjevanje. Rsdjy Spvxopfx Apbou

Leto izdelave: 2016, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Prodajam popolnoma delujoč kladivni drobilnik znamke ROBEX - DPH22KRL s tračnim transporterjem. Letnik 2016. Moč motorja drobilnika: 22kW. V primeru zanimanja prosim navedite kontakt v povpraševanju. Redpfxoy Rz Rle Apbju

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7614 Tehnični podatki: - širina vhoda: 550 mm - višina vhoda: 220 mm - širina osi: 630 mm - dolžina noža: 630 mm - število nožev: 2 kos - dimenzije sita: 60x60 mm - 2 spodnji zobati vpenjalni osi - motor spodnjih osi: pribl. 1,5 kW - zgornja zobata vpenjalna os - motor zgornje osi: pribl. 1,5 kW - vibracijski kanal - dolžina vibracijskega kanala: 4750 mm - širina vibracijskega kanala: 450 mm - glavni motor: 45 kW - motor vibracijskega kanala: 1,5 kW Rsdpfx Apjza Eipobju - samodejni povratni tek - vzvratna vožnja - skupne dimenzije stroja (d/š/v): 3200x1700x1400 mm - skupne dimenzije stroja (d/š/v): 4750x800x1100 mm - teža: cca 4500 kg PREDNOSTI – samodejni povratni tek (z možnostjo nastavitve) – vzvratna vožnja – rabljen sekalnik, zelo dobro ohranjen Cena brez DDV: 120.900 PLN Cena brez DDV: 28.780 EUR po tečaju 4,2 EUR (Cene se lahko spreminjajo zaradi večjih nihanj tečaja)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1974, Kataloška številka 7685 TEHNIČNI PODATKI - širina vhoda 440mm - višina vhoda 300mm - širina gredi 480mm - premer gredi 440mm - število nožev 2 kosa - dimenzija sita 50x50mm - zobata vlečna gred zgoraj in spodaj Rjdeza D Tmjpfx Apbju - motor gredi 0,78/1,1kW - električni avto-reverz (z možnostjo nastavitve) - s tračnim transporterjem - dolžina podajalnega traku 4006mm - širina podajalnega traku 380mm - pomik traku naprej/nazaj - glavni motor 30kW - dimenzije d/š/v 6100x1100x1100mm - teža približno 2000kg PREDNOSTI – nemška proizvodnja – s tračnim podajalcem – avto-reverz – rabljen sekljalnik, v zelo dobrem stanju Neto cena: 76.900 PLN Neto cena: 18.300 EUR po tečaju 4,2 EUR (Cene se lahko spremenijo ob večjih nihanjih)

Stanje: novo, Leto izdelave: 2025, Rotacijski nož Model: LINDNER Tip: ANTARES Letnik: 2025 Rodpfx Apoxn Nvhjbsu Nov / takoj pripravljen za uporabo Izdelujemo rezervne nože in nadomestne dele za drobilce in sekljalnike. Ob naročilu navedite tip noža.

Stanje: novo, Leto izdelave: 2025, Rotacijski noži Model: WEIMA, GROSS, VECOPLAN Tip: WL, WLK, GAZ, VAZ Leto izdelave: 2025 Rodpfx Asxw Nrbspbou Novi / Takoj pripravljeni za uporabo 1. Nož 40x40x25 M12 (PC) 2. Nož 40x40x25 M12 (KR) 3. Nož 40x40x25 M14 (KR) 4. Nož 40x40x20 M12 (KR) 5. Nož 40x40x16 M10 (KR) Izdelujemo nadomestne nože in rezervne dele za drobilce in mline. Prosimo, ob naročilu navedite tip noža.

Stanje: novo, Leto izdelave: 2025, Rotacijski nož Model: LINDNER Tip: MICROMAT Leto izdelave: 2025 Novo / Takoj pripravljeno za uporabo 1. Nož 43x43x20 2 kos (KR) 2. Nož 43x43x20 2 kos (K8) 3. Nož 43x43x23 1 kos (KR) 4. Nož 43x43x23 2 kos (K8) Proizvajamo nadomestne nože in rezervne dele za drobilce in sekljalnike. Ob naročilu navedite tip noža. Rodjxn Nyajpfx Apbsu

Stanje: novo, Leto izdelave: 2025, Strgalo nož Model: WEIMA, GROSS, UNTHA Tip: ZM30, GZ30, RS30 Letnik izdelave: 2025 Rsdpfx Aoxn I R Rjpbju Novo / takoj pripravljeno za uporabo 1. Rezilo 8Z-66 2. Rezilo 4Z-66 Smo proizvajalec rezervnih nožev in delov za drobilce in sekljalnike.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: nefunkcionalno, UNTHA RS30 SB-460 Leto izdelave: 2007 Rabljeno - poškodovano Število rotorjev: 4 Redpfjxn Iwkox Apbsu Prostor za mletje: 460 x 500 mm Nova rezila: 1Z-66, 8Z-66 Moč motorja: 2 x 11 kW, 380 V, 50 Hz Nove odprtine sita: Ø 30 mm Dolžina/Širina/Višina: 1340/1250/1970 mm Teža: ca. 1100 kg

Stanje: novo, Leto izdelave: 2025, Rezila za rezanje Model: WEIMA, GROSS, UNTHA Tip: ZM40, GZ40, RS40 Letnik izdelave: 2025 Nova / takoj pripravljena za uporabo 1. 1Z-86 rezilo 2. 2Z-86 rezilo Redpfxjxn H Ste Apbju Smo proizvajalec rezervnih rezil in delov za drobilce in sekače.

Stanje: novo, Leto izdelave: 2025, Strgalo nož Model: WEIMA, GROSS, UNTHA Tip: ZM40, ZMK50, GZ40, RS40, RS50 Letnik: 2025 Rsdoxn Iyfopfx Apbeu Nov / takoj pripravljen za uporabo 1. 8Z-86 nož 2. 4Z-86 nož Smo proizvajalci rezervnih nožev in nadomestnih delov za drobilnike in sekljalnike.