Kk-Industries Laser Fiber Flc 2060 4 Kw nakup rabljenega (91.338)

Stanje: novo, Sheet thickness: 1.8 mm Bending length: 1050 mm Top roll diameter: 70 mm Sheet length: 1050 mm Details: - Cast iron frame - Motorized bending - Conical bending device - Manual adjustment of the rear and lower roll via handwheel Nwodpfxjd Ab T Se Ah Ujg - Mobile control panel - Compliance with CE standards Options: - Rear roll with motor: €825 - Digital display for rear roll position: €1,010 - Frame cover: €274 - Hardened rolls: €392

Stanje: novo, Shaft diameter: 30 mm Upper roller diameter: 148 mm Lower roller diameter: 118 mm Working speed: 2-4 m/min Motor power: 0.7 - 0.85 kW Length: 600 mm Width: 800 mm Approx. weight: 220 kg Height: 1450 mm Technical specifications: - Steel frame - Two lower rollers are driven - Direct drive via gears - Upper roller runs idle (free-rotating) - Hardened rollers - Roller shafts are hardened and ground - Dual-speed motor - Standard rollers - Adjustable guide rollers - Horizontal and vertical working position Options: - Digital display EUR 700 Nwedpfod Eqq Asx Ah Ueg - Angular side guide rollers EUR 1,100 - Dual speed STANDARD - Brake motor EUR 150 PK 30 File Type Size Min. Dia Notes 150x10 20x6 1800 300 Standard Rolls 280x15 30x6 700 400 Standard Rolls 330x30 10x10 900 200 Standard Rolls 4Ø 30 Ø 10 900 200 Optional Rolls 5Ø 60x1.5 Ø 25x1.5 1000 600 Optional Rolls 1 1/2”x2.9 1/4”x1.8 600 300 Optional Rolls 750x30x3 40x20x2 1200 800 Optional Rolls 840x3 30x2 1200 800 Optional Rolls 940x40x5 30x30x4 600 300 Optional Rolls 1035x35x5 30x30x4 600 400 Optional Rolls 1150x6 20x3 600 400 Standard Rolls 1250x6 20x3 600 400 Standard Rolls 1350x6 20x3 600 400 Standard Rolls * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities specified for 260 N/mm² plate yield strength

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 16.0 mm Frame gap: 3,100 mm Total power requirement: 18.5 kW Approx. weight: 11,700 kg Dimensions (LxWxH): 4,200 x 2,050 x 2,100 mm Technical Data: Sheet thickness: 16 mm Cutting length: 3,200 mm Cutting angle: 2° Backgauge: motorized, 1,000 mm Motor power: 18.5 kW Length: 4,200 mm Width: 2,150 mm Height: 2,200 mm Weight: 12,900 kg Equipment: Swing beam shear design NC preselection control ELGO P40 Touch with backgauge and blade gap adjustment via controller (front access) Motorized backgauge up to 1,000 mm Clear control panel mounted on swing arm Hydraulic hold-downs mounted close to the cutting edge Foot switch Blade gap adjustment Cutting line illumination Nwedpsd Ab Hlsfx Ah Ueg Wide support table with ball inserts Foldable finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot Easy blade changing and regrinding Adjustable cutting length for economical processing Lower blade, 4-fold usable Upper blade, 2-fold usable Qualified customer service Operating manual in ENGLISH Machine and equipment in compliance with CE regulations

Stanje: novo, Dimensions (LxWxH): 1520 x 950 x 1780 mm Approx. weight: 1,440 kg Total power requirement: 4 kW Square steel: 35 mm Round steel: 40 mm Punching force: 60 t Throat depth: 220 mm Flat bar shear: 200 x 20 mm or 300 x 15 mm Notching (thickness x width x depth): 10 x 42 x 100 mm Punching – round: 28 x 15 mm or 38 x 11 mm or 110 x 3 mm Angle iron cutting 90° or 45°: 120 x 120 x 12 mm or 80 x 8 mm - With single cylinder - 5 workstations: punching station, notching station, and shear stations for flat, bar, and angle steel. Scope of delivery: - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Selector switch for set-up and operation modes - Support table with stops at notching and flat steel stations - Support table with stops at punching station - CE version PROPERTY DESCRIPTION / VALUE Punching force: 60 t Throat depth: 220 mm Stroke: 55 mm Strokes per min. (at 20 mm stroke): 25 Max. sheet thickness Ø 28 x 15 mm Working height: 955 mm Flat bar shear Cutting capacity: 300 x 15 mm / 200 x 20 mm Angle steel 45° (1 leg): 80 x 80 x 8 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 317 mm Round: 40 mm Square: 35 mm Material thickness: 10 mm Width: 1,520 mm Depth: 950 mm Nedpfxjd Ab Hye Ah Uewg Motor output: 4.0 kW Mains voltage: 400 V, 50 Hz Height: 1,780 mm Weight: 1,440 kg

Stanje: novo, Pressure: 60 Bending length: 2550 mm Distance between housings: 2100 mm Installation height: 550 mm Stroke (max.): 270 mm Throat depth: 450 mm Dimensions (LxWxH): 3220 x 2250 x 2560 mm Weight approx.: 5200 kg Motor power: 5.5 kW Standard equipment: KK-Industries has participated in production and is now manufacturing press brakes and guillotine shears based on its own concepts. We have assembled a high-quality model for the European market. The CNC press brake KLETZER Maxima-EUROPA XL, made in Turkey Model: KLETZER Maxima-EUROPA XL The powerful KLETZER Maxima-Europa XL press brake stands out for its high precision, accuracy, and versatile range of applications. The KLETZER Maxima-Europa XL offers a very large installation height and correspondingly large stroke (cylinder travel). The throat depth is also above average, resulting in minimal limitations when handling various workpieces. We insist on quality, which is also reflected in the control system. Nwodpfx Ahsd I Annj Ueg As the standard control, we have installed a high-quality Italian 10 2 D controller, which is exceptionally easy to program. Additionally, the KLETZER Maxima-Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R, all operated via the controller. We also make no compromises with the upper tool and die, equipping the KLETZER Maxima-EUROPA XL CNC press brake with premium quality tools from EUROSTAMP Italy or Rolleri Italy. A machine is only as good as its service, which is why we focus on highly qualified personnel with extensive experience in CNC sheet metal processing. CNC axes: Y1, Y2, X Controller: 2D Top tool: 135.75.R08 Bottom tool: 4V 60x60 85° Backgauge with dual linear guides and ball screw drive Motorized crowning device with CNC control 2 heavy duty front support arms, height-adjustable on linear guides Laser safety device on the upper beam CE safety equipment Various options available MAXIMA 2560 TECHNICAL DATA Type: MAXIMA 2560 Bending force (ton): 60 Bending length (mm): 2550 Distance between columns (mm): 2100 Stroke (mm): 270 Daylight (mm): 550 Throat depth (mm): 450 Motor power (kW): 5.5 Approach speed (mm/sec): 140 Bending speed (mm/sec): 10 Return speed (mm/sec): 120 Travel in X axis (mm): 650 Crowning: Manual Height (mm): 2560 Width (mm): 2250 Length (mm): 3220 Weight (kg): approx. 5200 KK-Industries GmbH There is something for everyone!

Stanje: rabljeno, Further technical data available on request. The scrubber-dryer with a 55 cm working width and semi-automatic drive is the ideal machine for cleaning small to medium-sized areas, even those with stubborn dirt. It is designed for high productivity, low operating costs, and extremely simple operation. Nodpfol Iir Ssx Ah Ujwg - Battery-powered scrubber-dryer with semi-automatic drive, disc brush, and dirty water suction - The floor is left dry and safe with just one pass - Designed for high productivity, low operating costs, and very simple use - Automatic squeegee release on accidental impacts protects against damage - Yellow-colored maintenance points for quick and easy servicing - Adjustable dosing of cleaning solution - Automatic water and brush stop when the machine is not in operation - Mechanical operation of brush and squeegee via levers Cleaning area: 1,000–1,600 m² Theoretical productivity: 1,450 m²/h Working width (brushes): 510 mm Working width (suction): 680 mm Packaging unit: 1 Dimensions & weights: Length: 1,165 mm Width/depth: 541 mm Height: 995 mm Weight: 61.5 kg Brushes Brush diameter: 510 mm Brush pressure: 27.5 kg Brush speed: 160 rpm Electrical connection Total power: 870 W Power supply: 24 V battery Battery runtime: 240 min Battery charging time: 12 h Operating voltage: 24 V Tanks Fresh water: 40 l Dirty water: 42 l

Stanje: novo, Sheet length: 1560 mm Sheet thickness: 5 mm Dimensions (LxWxH): 2250 x 2250 x 1400 mm Weight approx.: 2500 kg Motor: 7.5 kW Standard equipment: - NC control unit - Programmable, motorized backgauge with 750 mm travel - Shadow line lighting Njdpfx Aogickneh Uswg - 1 stop rail with measuring scale - 2 sheet support arms - 1 sheet support arm (applies to models 1106, 1306, 1505) - Finger guard - Ball roller table - Easy front adjustment of blade clearance - Ball screw - Stroke counter - Portable foot pedal with emergency stop button - Light barrier at the rear safety devices

Stanje: novo, Pressure: 20 Bending length: 900 mm Frame width: 900 mm Installation height: 325 mm Stroke length (max.): 150 mm Dimensions (LxWxH): 1760 x 1280 x 2190 mm Approx. weight: 1950 kg Motor power: 3.8 kW Electric ball screw CNC press brake KK Industries Model REVOLUTION B-Servo 900 mm x 20 t Standard equipment: KK-Industries is the general representative of the DENER group. We have assembled a high-quality model for Europe. The CNC Servo Electric Press Brake, KK-Industries made by DENER: Technological Advantages: Model REVOLUTION B-Servo 900 mm 20 t - High speeds with ball screw drive - The CNC servo electric press brake stands out for its high precision, accuracy, and versatile application possibilities - 100% electric, 0% hydraulic oil - Up to 40% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter operation - Reduced maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Technical Specifications Bending Length (B): 900 mm Bending Capacity (Pressing force): 20 tons Maximum Stroke: 150 mm Daylight Opening (Q): 325 mm Approaching Speed: 150 mm/s Bending Speed: 20 mm/s Return Speed: 150 mm/s Nwodpfod H Hh Djx Ah Ueg Power: 3.8 kW Weight: 1950 kg Overall Length (A): 1760 mm Width (C): 1280 mm Height (D): 2190 mm KK-Industries GmbH There's something for everyone!

Stanje: novo, Pressure: 70Cylinder: fixedStroke: 350Frame width: 900Working speed: 3Length: 1700Width: 700Height: 2100Weight approx.: 650Rapid advance: 29Height-adjustable worktable – conveniently adjustable via chain Safe two-hand operation – easy control via hand lever and push button Adjustable maximum pressure – individually adaptable for a wide range of applications Integrated manometer – allows precise pressure monitoring during operation Njdpfxowwnh Do Ah Ujwg CE-compliant design – manufactured according to current safety and quality standards Operating manual – detailed and comprehensible, available in German and English Two working speeds – for especially precise and efficient work Image is for illustration purposes only

Stanje: novo, Bending length: 2,600 mm Sheet thickness: 6 mm Upper roll diameter: 190 mm Sheet length: 2,600 mm Technical data: - Rear roll motorized - Conical bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Upper and lower rolls driven by brake electromotors and planetary gears in the gearbox - Portable control panel - In compliance with CE standards Options: - Lower roll driven by electric motor EURO 1,925 - Digital display for rear roll position EURO 1,010 Nwsdpfxjd Ab Nke Ah Usg - Extended rolls EURO 966 - Profile rolls EURO 1,190 We have numerous references!

Stanje: novo, Bending length: 2100 mm Sheet thickness: 30 mm Top roller diameter: 360 mm Nodpfx Ahsd Ab S Es Ujwg Technical data: - Hardened and polished rollers - Complete frame made from ST-52 steel - Conical bending device - Digital display for side rollers - Portable control panel - Rollers mounted with bearings - Upper roller cover, hydraulically openable and lockable via the control panel - All rollers driven by hydraulic motor and planetary gearbox - Side movements operated hydraulically Options: - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 9,060

Stanje: novo, Sheet length: 2600 mm Sheet thickness: 20 mm Top roll diameter: 330 mm Technical data: - Hardened and polished rolls - Full body made from ST-52 steel - Conical bending device - Digital readout for side rolls - Portable control panel - Rolls are mounted with bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically powered Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 9,200 Nwodpfxod Ab S Nj Ah Ueg We have many references!

Stanje: novo, Bending length: 2100 mm Sheet thickness: 25 mm Upper roll diameter: 330 mm Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls are mounted with bearings - Upper roll cover hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically driven Nwsdpfx Ahod Ab S Rj Ujg Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 8,400 We have numerous references!

Stanje: novo, Bending length: 2600 mm Sheet thickness: 16 mm Top roll diameter: 300 mm Nwsdpsd Ab S Ujfx Ah Uog Technical specifications: - Hardened and polished rolls - Full body made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Top roll cover hydraulically openable and closable from the control panel - All rolls driven by hydraulic motor and planetary gear - Lateral movements driven hydraulically Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 8,250 We have numerous references!

Stanje: novo, Bending length: 2600 mm Sheet thickness: 10 mm Top roll diameter: 230 mm Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - Conical bending device - Digital readout for side rolls - Portable control panel - Rolls mounted with bearings - Upper roll cover hydraulically openable and lockable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements driven hydraulically Options: - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 8,250 - Side supports: EUR 6,600 Nodpfsd Ab Thsx Ah Uewg We have numerous references!

Stanje: novo, Bending length: 2050 mm Sheet thickness: 1.8 mm Top roller diameter: 95 mm Sheet length: 2050 mm Technical data: - Cast iron body - Manual or motorized (optional) bending Nodpfed Ab Tuox Ah Uswg - After bending, the top roller can be swung out to the side for easy material removal - Cone bending device - Rear and lower roller movement up and down manually by handwheel - Portable control panel - In compliance with CE standards Options: - Motorized rear roller - Digital display for rear roller position - Body covering EURO 432,-- - Hardened rolls EURO 940,-- - Variable rotation speed We have numerous references!

Stanje: novo, Bending length: 1550 mm | Sheet thickness: 2.5 mm | Upper roll diameter: 90 mm Nwjdpfsd Ab Twex Ah Uog Technical specifications: - Cast iron frame - Manual or motorized (optional) bending - After bending, the upper roll can be swung out to facilitate easy removal of the material - Conical bending device - Manual adjustment of rear and lower rolls up and down via handwheel - Mobile control console - Complies with CE standards Options: - Motorized rear roll - Digital display for rear roll position - Body cover EUR 362,-- - Hardened rollers EUR 650,-- - Variable rotation speed We have a large number of references!

Stanje: novo, Sheet thickness: 3 mm Bending length: 1250 mm Top roll diameter: 90 mm Sheet length: 1250 mm Technical Data: Nwedpfx Aed Ab Tzjh Usg - Cast iron frame - Manual or motorized (optional) bending - After bending, the top roll can be opened sideways for easy removal of material - Conical bending device - Movement of the rear and lower rolls is manual via handwheel - Portable control panel - In compliance with CE standards Working length: 1250 mm Maximum sheet thickness: Pre-bending: 2.5 mm Bending: 3.0 mm Yield strength: 240 N/mm² Number of rolls: 3 Top roll diameter: Ø 90 mm Min. bending diameter: 130 mm Motor power: 1.1 kW Machine length: 1950 mm Height: 1130 mm Width: 900 mm Weight: 500 kg Options: - Motorized rear roll: EUR 825 - Digital display for rear roll position: EUR 1,010 - Body cover: EUR 314 - Hardened rolls: EUR 550 We have many references!

Stanje: novo, Further technical data available on request Nodpfod Aca Dex Ah Uowg 3D welding table systems Worktop design: top plate For more information, see catalogue/price list

Stanje: novo, Pressure: 80 Bending length: 2550 mm Distance between uprights: 2550 mm Installation height: 590 mm Max. stroke length: 300 mm Dimensions (LxWxH): 3680 x 1960 x 2500 mm Approx. weight: 6100 kg Motor power: 11 kW CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-8025 Servo Motorized Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and, thanks to their flexibility and reliability, represent the technology of tomorrow. The increased speed and precision of this new generation of machines provide higher efficiency, ergonomic features, and a more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Dener is a pioneer of this technology, offering extensive experience and high quality. Standard equipment: Nwodpjd Etfwefx Ah Uog KK-Industries is the general representative of the DENER group. We have assembled a high-quality model specifically for Europe. The CNC Servo Electric Press Brake by KK-Industries, made by DENER, offers technological advantages: - 100% electric, 0% hydraulic oil - Up to 50% less energy consumption compared to conventional hydraulic press brakes - High efficiency and precision - High bending speed and significantly quieter - Full length between the frames is usable - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending sequences directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard equipment includes: - 3D color graphics control Delem 66T with 17" touch screen - Y1, Y2, X, and R axes CNC controlled via the controller - CNC crowning via the 3D controller - X-axis 500 mm, R-axis stroke 150 mm for 1.5 m and 2 m models - X-axis 750 mm, R-axis stroke 250 mm on all other press brakes - No compromises on the upper tool and die: CNC Servo Electric Press Brake KKI REVOLUTION equipped with high-quality tools from EUROSTAMP Italy - Segmented gooseneck upper tool - 4-V die block 60x60 mm (V = 16, 22, 35, and 50 mm) - Backgauge controlled by servo motors on linear guides and ball screws - As with any machine, service quality is pivotal; for this reason, we focus on highly qualified staff with extensive experience in CNC sheet metal processing - Laser safety device on the upper beam - CE safety equipment - Operating manual in GERMAN and ENGLISH Options: - Additional controlled backgauge axes: X1, X2, R, Z1, Z2, Delta X - ATF Type 6-axis backgauge, X1, X2 - R Type backgauge - X-Prime Type backgauge - Hydraulic upper and lower tool clamping for tools - CNC 3D touchscreen controller DELEM DA-69T We recommend the following options: - Manual crowning € 2,329 - CNC crowning € 4,658 KK-Industries GmbH

Stanje: novo, Sheet length: 3,200 mm Nedped Ab Hnofx Ah Uewg Sheet thickness: 10 mm Total power requirement: 11 kW Weight approx.: 8,100 kg Dimensions (LxWxH): 4,000 x 1,950 x 1,900 mm Technical Data: Sheet thickness: 10 mm Cutting length: 3,200 mm Cutting angle: 1.50° Backgauge: motorized, 1,000 mm Motor power: 11 kW Length: 4,000 mm Width: 1,950 mm Height: 1,900 mm Weight: 8,100 kg Equipment: Swing beam design NC preset control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the controller at the front Motorized backgauge up to 1,000 mm Clearly arranged control panel mounted on a swing arm Hydraulic hold-downs arranged close to the cutting edge Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball inserts Foldable finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot Easy replacement and regrinding of blades Adjustable cutting length for economical processing Bottom blade with 4 usable cutting edges Top blade with 2 usable cutting edges Qualified customer service Operating manual in ENGLISH Machine and equipment in accordance with CE regulations

Stanje: novo, Bending length: 3100 mm Sheet thickness: 6 mm Top roll diameter: 200 mm Technical specifications: - Rear roll motorized drive - Cone bending device - Hardened and polished rolls - Complete frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearboxes Nwedpfod Ab Nfex Ah Uog - Portable control panel - Compliant with CE standards Options: - Bottom roll driven by electric motor: EUR 2,200 - Digital display for rear roll position: EUR 1,010 - Extended rolls: EUR 966 - Profile rolls: EUR 1,190 We have numerous references!

Stanje: novo, Punching force: 55 t Approx. weight: 1,520 kg Height: 1,880 mm Motor: 5.5 kW Width: 1,500 mm Blade length: 317 mm Throat depth: 255 mm Stroke: 60 mm - Equipped with one cylinder - 5 workstations: Punching, notching station, as well as flat, bar, and angle steel shear stations. Equipped with: - Hydraulic and electrical components from renowned manufacturers - Support table at the punching station with scales and stops - Support table at the notching and flat steel stations with stops - Electric length stop 1,000 mm for automatic cut triggering - Selector switch for setup and operation modes - Technical documentation - Lighting - 2 foot pedals - CE-compliant FEATURE DESCRIPTION / VALUE Punching force: 55 t Throat depth: 255 mm Stroke: 60 mm Strokes per min. (with 20 mm stroke): 25 Max. sheet thickness: Ø 20 x 20 mm Working height: 900 mm Shearing capacity: 300 x 15 mm, 200 x 20 mm Nwedpfx Ahjttc Upe Ujg Angle steel 45° (1 leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 317 mm Round: 40 mm Square: 40 mm Material thickness: 10 mm Width: 1,500 mm Depth: 950 mm Motor power: 5.5 kW Mains voltage: 400 V, 50 Hz Height: 1,880 mm Weight: 1,520 kg

Stanje: novo, Punching force: 65 t Weight approx.: 1,600 kg Height: 1,880 mm Motor: 5.5 kW Width: 1,700 mm Blade length: 10 mm Throat depth: 305 mm Stroke: 55 mm - With one cylinder - 5 workstations: punching, notching station, as well as flat bar, round bar, and angle steel shearing stations. Supplied in the following configuration: - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Selector switch for setup and operation modes - Support table with stops at the notching and flat bar stations - Support table with stops at the punching station - CE-compliant design SPECIFICATION / VALUE Punching force: 65 t Throat depth: 305 mm Stroke: 55 mm Strokes per min. (at 20 mm stroke): 25 Plate thickness (max.): Ø 26 x 20 mm Working height: 900 mm Shearing capacity: - 375 x 15 mm - 300 x 20 mm Angle steel 45° (one leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 380 mm Round: 45 mm Square: 45 mm Material thickness: 10 mm Width: 1,700 mm Depth: 950 mm Motor power: 5.5 kW Supply voltage: 400 V / 50 Hz Height: 1,880 mm Nedpjttc Utofx Ah Ujwg Weight: 1,600 kg

Stanje: novo, Pressure: 60 Motor: 11 Installation height: 450 mm Max. stroke length: 400 mm Table size: 600 x 500 x 80 mm Ram surface: 600 x 500 x 90 mm Table height: 850 mm Dimensions (L x W x H): 1,300 x 2,000 x 2,700 mm Weight approx.: 4,000 kg Oil fill: 200 L Control / key switch: 1. Setup mode, manual, without light sensor (max. 10 mm/sec speed) 2. Automatic mode (at full speed) with light sensor Main cylinder: Ø 150 mm Auxiliary cylinders: 2 pcs Ø 60 x 40 mm Auxiliary guide: 2 pcs Ø 40 mm Motor: 7.5 kW / 11 hp (IE3) Pump: 18 cc – 26 L / ASC Speed: advance 110 mm/sec – return 120 mm/sec; pressure: 11 mm – 5 mm/sec Installation height: 500 mm Stroke length: 400 mm Table plate: 600 x 500 x 80 mm (with T-slots) Ram plate: 600 x 500 x 90 mm (with T-slots) Table height: 850 mm (floor to top edge of table) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10–60 tonnes) Speed adjustable via PLC Nwsdpfxjmmuq Is Ah Ueg Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC: SICK Light sensors: SICK 700 + 150 mm Linear encoder for stroke length setting 7” PLC display – Siemens (German & English) Mobile two-hand control Ethernet connection for remote maintenance Alarm indicator for malfunctions (visual & audible) Double work area lighting 8 free I/Os on the PLC for external connections The press meets the Machinery Directive Hydraulic proportional valves Dual-channel cable protection Operating instructions & parts list (German) With side safety door (doors can be slid back)