Kk-Industries Cyl 110-10/5.0 nakup rabljenega (53.930)

Stanje: novo, Column spacing: 2000 x 1000 Return speed: 150 mm/s Approximate weight: 35,000 kg Stroke: 800 mm Total power requirement: 30 kW Installation height: 1000 mm Rapid traverse: 120 mm/s Pressure: 500 bar Working table: 2500 x 1500 mm Working speed: 12 mm/s Dimensions (LxWxH): 2500 x 2700 x 5400 mm We also build custom presses for your specific application. DETAILS: 4-Column Press, 500 tons Capacity: 500 tons (at 250 bar – 510 tons) Control: Automatic via two-hand operation with key switch selection 1. Manual via operating panel for setup mode 2. Automatic with single cycle via two-hand operation, without drawing cushion Main cylinder: Ø500 mm Auxiliary cylinders: 2 pcs, Ø120 x 80 mm (move alongside main cylinders) Motor: 37 kW – 50 HP Pump: 100 cc = 150 l/min REXROTH axial piston pump Cylinder speed: Advance 150 mm/s – Return 170 mm/s – Pressure phase 15-8 mm/s Working area: 2500 x 1300 mm (Table & ram plate with T-slots) (T-slot dimensions as per customer drawing) Distance between columns: 2000 x 800 mm Installation height: 1000 mm (max. distance between table & ram plate) Stroke length: 800 mm (length adjustable via linear scale) Columns: Ø180 mm Hydraulic accessories: Hydraulic tank with control block & valves (complete REXROTH) Oil tank capacity: 1500 l; Oil volume: 1200 l Advance valves: 2 pcs Hydraulic & mechanical ram securing system Pressure regulator via PLC (min. pressure 60 tons) Air cooler Hydraulic accessories mounted on top of the press Auxiliary motors Auxiliary pump Filter: Rexroth Kdjdped Aca Aofx Al Nsk Additional valve for spring-loaded opening Speed adjustment via display Hydraulic accessories mounted on top of the press Safety railing around hydraulic tank Side access ladder Control accessories: Controller: SIEMENS S7 1214 Safety PLC: SICK Swiveling control panel Ethernet connection for remote maintenance Two-hand operation (mobile, sufficient cable length for front & rear operation) Main control cabinet 12" Beijer PLC display Light sensors at front & rear – SICK 1000 + 150 mm Linear scale for stroke length adjustment (Novatechnik) Soft starter for main motor 8 free inputs & outputs Working area lighting On side of working area: windowed door secured with limit switch (400 x 600 mm) Table height: 1000 mm (floor to top edge of table plate) Total weight: approx. 35,000 kg Overall dimensions (LxWxH): approx. 2500 (including hydraulics) x 2700 x 5400 mm (including railing) Foundation: mandatory The price is valid until 30.12.2022! Training and commissioning are included in the price.

Stanje: novo, Shaft diameter: 50 mm Roller diameter: 155 mm Working speed: 4.5 m/min Kjdod Eqqwepfx Al Njdk Motor power: 1.5 kW Length: 750 mm Width: 1000 mm Height: 1400 mm Weight approx.: 400 kg Technical data: - Steel frame - Two directly driven rollers - Rollers are hardened - Roller shafts made of special steel, hardened and ground - Roller shafts mounted in bearings - Standard rollers - Guide rollers - Horizontal and vertical working position Options: - Digital display EUR 700 - Lateral angle guide rollers EUR 1,100 - Double working speed EUR 700 PK 35 File type Size Min. Dia Notes 1. 60x10 40x10 500 400 Standard Rolls 2. 100x15 60x10 450 350 Standard Rolls 3. 35x35 20x20 900 300 Standard Rolls 4. Ø35 Ø30 600 400 Optional Rolls 5. Ø70x2 Ø30x2 1,000 500 Optional Rolls 6. 2”x2.9 1”x2.3 1,000 350 Optional Rolls 7. 70x30x2 50x40x3 1,200 1,200 Optional Rolls 8. 50x3 40x3 1,700 600 Optional Rolls 9. 50x50x5 40x40x5 800 600 Optional Rolls 10.50x50x6 30x30x3 1,000 500 Optional Rolls 11.60x7 30x4 700 400 Standard Rolls 12.60x7 30x4 800 500 Standard Rolls 13.60x7 30x4 700 500 Standard Rolls 14. UPN 80 UPN 30 1,000 500 Optional Rolls* 15. UPN 80 UPN 30 1,200 800 Standard Rolls* * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities are based on plate yield strength of 260 N/mm²

Stanje: novo, Pressing force: 50 Bending length: 2040 mm Frame width: 2040 mm Installation height: 590 mm Max. stroke length: 300 mm Dimensions (LxWxH): 3170x1960x2500 mm Approximate weight: 4850 kg Motor power: 11 kW CNC crowning via controller: yes CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-5020 Servo-motorized Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and represent the technology of tomorrow thanks to their flexibility and reliability. The higher speed and precision of this new generation of machines offers greater efficiency, ergonomic features, and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Dener is a pioneer of this technology. Equipped with extensive experience and quality. Standard Equipment: KK-Industries is the general representative of the DENER group of companies. We have put together a high-quality model for Europe. Kdjdpfx Alod Etfye Nok The CNC Servo Electric Press Brake by KK-Industries, made by DENER: Technological Advantages: Model REVOLUTION DDM The CNC servo-electric press brake stands out for its high precision, accuracy, and versatile application possibilities. - 100% electric, 0% hydraulic oil - Up to 50% less energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter - Full usable length between frames - Lower maintenance costs - Environmentally friendly - Operator-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment: - 3D color graphic control Delem 66 T 17" touchscreen - Y1, Y2, X, and R axes CNC-controlled via the controller - CNC crowning via 3D controller - X-axis 500 mm, R-axis stroke 150 mm for 1.5 m and 2 m models - X-axis 750 mm, R-axis stroke 250 mm for all other press brakes - We make no compromises on the punch and die: the CNC Servo Electric Press Brake KKI REVOLUTION is equipped with quality tooling from EUROSTAMP Italy. - Split gooseneck upper tool - 4-V die block 60x60 (V = 16, 22, 35, and 50 mm) - Backgauge with servo motors on linear guideways and ball screw - Naturally, every machine is only as good as its service. That’s why we focus on highly-qualified engineers with extensive experience in CNC sheet metal processing. - Laser safety device on upper beam - CE safety equipment - Operating instructions in GERMAN and ENGLISH Options: - Additional controlled backgauge axes X1, X2, R, Z1, Z2, Delta X - ATF Type 6-axis backgauge, X1, X2 – R Type backgauge - X-Prime Type backgauge - Hydraulic upper and lower tool clamping systems - CNC 3D touchscreen control DELEM DA-69T We recommend the following options: - Manual crowning ¤ 2,329.00 - CNC crowning ¤ 4,658.00 KK-Industries GmbH

Stanje: novo, Pressure: 40 Bending length: 1530 mm Distance between side frames: 1530 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 2660x1960x2500 mm Weight approx.: 4600 kg Motor power: 11 kW CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-4015 Servo-motor driven press brake REVOLUTION Servo-electric press brakes contain no hydraulic system and, due to their flexibility and reliability, represent the technology of tomorrow. The increased speed and precision of this new machine generation offer you greater efficiency, ergonomic features, and a more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Dener is a pioneer in this technology, with extensive experience and quality. Standard equipment: KK-Industries is the general representative of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Model REVOLUTION DDM The CNC Servo Electric Press Brake is distinguished by its high precision, accuracy, and versatile range of applications. - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and noticeably quieter - Full working length between frames can be used - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard equipment: 3D colour graphical control Delem 66 T 17" touch screen Y1, Y2, X, and R axes CNC-controlled via the panel X-axis 500 mm, R-axis stroke 150 mm on 1.5 m and 2 m models X-axis 750 mm, R-axis stroke 250 mm on all other press brakes We also make no compromises on the upper tool and die and equip the CNC Servo Electric Press Brake KKI REVOLUTION with high-quality tooling from EUROSTAMP Italy. Segmented gooseneck upper tool 4-V die block 60x60 mm (V= 16, 22, 35, and 50 mm) Back gauge equipped with servo motors on linear guides and ball screws Of course, every machine is only as good as the service. For this reason, we place strong emphasis on highly qualified staff with extensive experience in CNC sheet metal processing. Laser safety device at the upper beam CE safety equipment Operating manual in GERMAN and ENGLISH Ksdjd Etfzspfx Al Nedk Options: Additional controlled axes for back gauge: X1, X2, R, Z1, Z2, Delta X ATF type 6-axis back gauge, X1, X2 – R type back gauge X-Prime type back gauge Hydraulic upper and lower tool clamping CNC 3D touchscreen controller DELEM DA-69T We recommend the following options: - Manual crowning ¤ 2,330 - CNC crowning ¤ 4,658 KK-Industries GmbH There's something for everyone here!

Stanje: novo, Pressure: 200 Bending length: 4080 mm Distance between uprights: 4080 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 5740 x 2130 x 2680 mm Weight approx.: 13,000 kg Motor power: 22 kW CNC crowning via control: Yes CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-20040 Servo-motorized Press Brake REVOLUTION Servo-electric press brakes feature no hydraulic system and, thanks to their flexibility and reliability, represent tomorrow’s innovative technology. The increased speed and precision of this new generation of machinery deliver greater efficiency, ergonomic advantages, and environmentally friendly production processes. As the first manufacturer of servo-electric press brakes with a range of models and tonnages, Dener is a pioneer in this field – offering exceptional experience and quality. Standard Equipment: Kodpfed Etf Asx Al Nodk KK-Industries is the general representative for the DENER group. We have configured a high-quality model for the European market. The CNC Servo Electric Press Brake by KK-Industries, made by DENER, offers the following technological advantages (Model: REVOLUTION DDM): - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and precision - High bending speed and significantly quieter operation - Full working length utilization between side frames - Reduced maintenance costs - Environmentally friendly - Operator-friendly control panel - Automatic calculation of bending sequences directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard features: - 3D color graphical control DELEM 66T with 17” touchscreen - Y1, Y2, X, and R axes CNC-controlled - CNC crowning via 3D controller - X-axis 500 mm / R-axis stroke 150 mm for 1.5 m and 2 m models - X-axis 750 mm / R-axis stroke 250 mm for all other press brakes - No compromise on tooling: machine comes equipped with high-quality tools from EUROSTAMP, Italy - Split gooseneck upper tool - 4-V die block 60x60 (V = 16, 22, 35, and 50 mm) - Backgauge with servomotor drive on linear guides and ball screw spindle - Premium laser safety system on upper beam - CE-compliant safety equipment - Operating manual in GERMAN and ENGLISH Options: - Additional axes on the backgauge: X1, X2, R, Z1, Z2, Delta X - ATF series 6-axis backgauge: X1, X2 - R-type and X-Prime type backgauge - Hydraulic upper and lower tool clamping - 3D touchscreen CNC control DELEM DA-69T KK-Industries GmbH

Stanje: novo, Shaft diameter: 50 mm Upper roll diameter: 152 mm Lower roll diameter: 162 mm High-performance hydraulics: 8 Working speed: 4.5 m/min Motor power: 1.1 kW Length: 810 mm Width: 950 mm Height: 1500 mm Approx. weight: 500 kg Technical Data: - Welded steel frame - 3 rolls are motor-driven - Hardened shafts made of special steel - Upper roll hydraulically adjustable - Horizontal and vertical working positions - Standard rolls - Guide rolls - Brake motor for precision bending - Portable control panel Kdjdjd Ab H Sopfx Al Nsk Options: - Digital display €700 - NC unit €7,000 - Angular side guide rolls €1,400 HPK 50 file Type Size Min. Dia Notes 1 60x10 20x10 600 300 Standard Rolls 2 100x15 50x10 600 300 Standard Rolls 3 35x35 15x15 600 300 Standard Rolls 4 Ø35 Ø20 600 300 Optional Rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7 70x30x3 30x15x2 1500 400 Optional Rolls 8 50x3 20x2 1600 400 Optional Rolls 9 50x50x6 30x30x3 600 400 Optional Rolls 10 50x50x6 30x30x3 900 600 Optional Rolls 11 60x7 30x4 600 400 Standard Rolls 12 60x7 30x4 700 400 Standard Rolls 13 60x7 30x4 700 400 Standard Rolls 14 UPN80 UPN30 800 400 Optional Rolls * 15 UPN80 UPN30 1200 600 Standard Rolls * * Special washer (spacer) may be required / Only with special Beam Bending Attachment • Capacities are based on 260 N/mm² yield strength of plate

Stanje: novo, Working area: 2000 x 6000 mm Loading capacity: 1850 kg X-axis travel: 2020 mm Y-axis travel: 6050 mm Laser power: 6 kW Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Approx. weight: 16,000 kg Dimensions (LxWxH): 13,200 x 2,800 x 2,300 mm Table change time: 15 sec Max. speed: 120 m/min The FLC series is a fast, precise, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine with premium-class standards. Capable of handling up to 30,000 W of laser power, it is an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used in the production of agricultural machinery, textile machines, food processing equipment, construction machinery, elevators, and other large machines and installations. It is an ideal cutting machine for anyone wishing to outsource cutting operations. The system enables easy blowing, cutting, pausing, calibration simulation, etc. via wireless remote control. Standard nesting software quickly prepares parts for cutting without operator intervention, and also features a Flycut function. Equipped with a dual exchange table, allowing continuous operation with no downtime. All our machines are manufactured to European standards and have CE certification. Our FLC-type machines feature nozzle cleaning and a dual camera system. Kjdpfjtwtnzex Al Nodk Available cutting bed sizes: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head is equipped with an autofocus and active anti-collision function, as well as an Auto-View feature, which detects obstacles and automatically repositions. Cutting heads are equipped with automatic cooling. The bridges used in all our machines are made from welded aluminum alloy sheet construction and are monolithic. The one-piece design ensures rigidity and shape retention, preventing deformation under impact, load, or overlapping. Additionally, thanks to their structure being three times lighter than steel profiles, higher speeds and acceleration can be achieved with lower motor power. Included accessories: - Water chiller - Electrical cabinet cooling - Automatic focusing head - Nesting software - 19-inch touch CNC controller - Flycut function - Nozzle and lens starter kit - Parts debris drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Approximate weight: 6,250 kg Dimensions (LxWxH): 4,180 x 2,150 x 2,000 mm Technical Data: Sheet thickness: 6 mm Cut length: 3,200 mm Cutting angle: 1.30° Backgauge: motorised, 1,000 mm Motor power: 7.5 kW Length: 4,000 mm Width: 1,700 mm Height: 1,800 mm Weight: 6,250 kg Equipment: Swing beam design NC preselection control ELGO P 40 T Kodpfx Ash Talzel Nodk with backgauge and cutting gap adjustment from the front via the control panel motorised backgauge up to 1,000 mm clear control panel mounted on a swing arm hydraulic hold-downs arranged close to the cutting edge foot switch cutting gap adjustment cutting line illumination wide support table with ball inserts foldable finger guard 1,000 mm 1 T-slot side stop 2 sheet support arms with T-slot simple blade change and resharpening adjustable cutting length for economic processing lower blade with four cutting edges, reversible upper blade with two cutting edges, reversible qualified customer service Operating manual in ENGLISH Machine and equipment in compliance with CE regulations

Stanje: novo, Sheet length: 1560 mm Sheet thickness: 5 mm Dimensions (LxWxH): 2250 x 2250 x 1400 mm Standard equipment: - NC control unit - Programmable motorized backgauge with 750 mm travel - Shadow line lighting - 1 piece angle gauge with scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table - Blade angle easily adjustable from the front - Ball screw spindle - Cut counter - Portable foot pedal with emergency stop button Ksdpfxogick Is Al Njdk - Light barrier on the rear safety guard

Stanje: novo, Blechlänge: 2060 Blechstärke: 3 Standardzubehör NC-Steuerung Programmierbarer, motorisierter Rückanschlag mit 750 mm Hub Schattenlinienbeleuchtung 1 Stück Anschlagschiene mit Skala 2 Stück Materialstützarme 1 Stück Materialstützarm (bei den Modellen 1103, 1303, 1503) Fingerschutz Schneidlinienbeleuchtung Kugelgewindetrieb Schnittzähler Tragbares Fußpedal mit Not-Aus-Schalter Lichtschranke an den hinteren Schutzvorrichtungen Optionen 0–180° verstellbarer Winkelanschlag: 910 EURO Pneumatisches Blechstützsystem (hinten): 3.200 EURO Lichtschranke hinten (Sicherheit): 1.620 EURO Kdjdpegick Sefx Al Njk Elgo P40T Touchscreen-Steuerung: 1.960 EURO Klinge für Edelstahl (statt Standard): 1.000 EURO Ersatzklingen (Ober- und Untermesser, 1 Satz): 2.350 EURO

Stanje: novo, Shaft diameter: 580 mm Working speed: 2-5 m/min Motor power: 30 kW Length: 3000 mm Width: 2310 mm Height: 3100 mm Weight approx.: 16,500 kg Technical specifications: - Welded steel frame construction - 3 driven rollers - Hardened and ground shafts made of high-strength special steel - Rollers are hardened and ground - Horizontal working position - Standard hardened rollers - Mobile control panel - Lateral angle guide rollers - Brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit 10” screen EURO 11,500,-- Kdedpfjh Alh Usx Al Nok -

Stanje: novo, Pressure: 150 tons Cylinder: horizontally adjustable Stroke: 350 mm Frame width: 1500 mm Working speed: 3 mm/s Fast forward: 22 mm/s Length: 2500 mm Width: 1200 mm Height: 2500 mm Approximate weight: 2500 kg Cylinder travel, horizontal: 1000 mm - Cylinder horizontally adjustable – 1000 mm - Height-adjustable worktable – easily adjustable via chain mechanism - Safe two-hand operation – convenient control via hand lever and push button - Adjustable maximum pressure – can be customized for a variety of applications - Integrated manometer – allows for precise pressure monitoring during operation - CE-compliant design – manufactured according to current safety and quality standards - Operating manual – comprehensive and easy to understand, available in German and English Kdjdpowwng Tefx Al Nok - Two working speeds – enables especially precise and efficient operation Image for illustration purposes only.

Stanje: novo, Pressure: 70 Cylinder: horizontally adjustable Stroke: 350 mm Frame width: 900 mm Working speed: 3 Length: 1700 mm Width: 700 mm Height: 2100 mm Weight approx.: 650 kg Rapid advance: 29 Horizontally adjustable cylinder: 550 mm – Horizontally adjustable cylinder – 550 mm Height-adjustable work table – conveniently adjustable via chain drive Safe two-hand operation – user-friendly control via hand lever and push-button Kdodpfx Aowwnhwsl Nek Adjustable maximum pressure – can be individually set for various applications Integrated manometer – enables precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating instructions – detailed and easy to understand, available in German and English Two working speeds – for particularly precise and efficient operation The image is for illustrative purposes only.

Stanje: novo, Working area: 2000 x 6000 mm Loading capacity: 1450 kg X-axis travel: 2020 mm Y-axis travel: 6050 mm Laser power: 12 kW Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Weight approx.: 11,500 kg Kodpfsruwb Ajx Al Njdk Dimensions (LxWxH): 10,000 x 4,400 x 2,120 mm The FLC Series is a fast, precise, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency, premium-standard laser cutting machine, supporting laser power up to 30,000 W—making it an excellent choice for cutting thick sheets. FLC fiber laser cutting machines are commonly used in the manufacturing of agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large-scale machines and installations. It is an ideal cutting solution for those looking to outsource. The wireless remote control allows easy blowing, cutting, pausing, calibration simulation, and more. The standard nesting software program prepares parts for cutting extremely quickly and without manual intervention. Flycut function is also available. Featuring a double exchange table, the machine enables continuous cutting without downtime. All our machines are manufactured to European standards and CE certified. Our FLC models feature nozzle cleaning and dual camera system. Available cutting formats: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head features autofocus, active anti-collision, and an auto-view function, which detects obstacles and moves automatically. Cutting heads are equipped with automatic cooling. The bridge used on all machines is a single-piece, welded construction made of aluminum alloy plates. The monolithic structure ensures rigidity and prevents deformation from impacts, overlaps, or stresses, while its weight—three times lighter than steel-type bridges—enables high speed and acceleration with lower motor power requirements. Accessories included: - Water chiller - Electrical cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC controller - Fly cutting - Nozzle and lens starter kit - Scrap drawers for cut parts - Automatic table exchanger - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system

Stanje: rabljeno, Further technical data available on request Ride-on Scrubber Dryer KKI ASSM 650 with automatic drive and disc brushes Kjdsl Iir Iepfx Al Njdk Demo special price EUR 6,899 Product Information KKI 650 Ride-on Scrubber Dryer - Ride-on scrubber dryer Very compact ride-on scrubber dryer with a 65 cm working width and an extremely small turning radius for cleaning in confined spaces - Extremely maneuverable – on-the-spot turning - Multiple small disc brushes with increased contact pressure Description: - Battery-powered ride-on scrubber dryer with automatic drive and disc brushes - The very compact size provides this model with the necessary agility to operate effectively in tight spaces, allowing for easy navigation around obstacles - Control panel with operating elements - Manual operation of brush, squeegee, and water flow via levers - Tiltable dirty water tank for easier cleaning - Multiple small disc brushes with directly mounted squeegee enable a short design and a very small turning radius - Disc brushes with individual motors increase contact pressure - Automatic release of the squeegee upon accidental collisions to prevent damage Features: - Drive motor - Central, curved squeegee - 2-tank system - Hour meter - Fresh water tank with quick-fill hose - Automatic speed regulation - Automatic water and brush stop - Battery charge indicator Scope of delivery: - 4 disc brushes - Battery - Charger - Cleaning area: 3,000 sqm - Working capacity: 3,250 sqm/h - Brush working width: 650 mm - Suction width: 750 mm - Speed: 5 km/h - Brush diameter: 4 x 180 mm - Brush pressure: 22 kg - Brush speed: 190 rpm - Fresh water tank: 65 l - Dirty water tank: 65 l - Power supply: 24 V battery - Total power: 1,650 W - Rated voltage: 24 V - Length: 1,150 mm - Width/Depth: 780 mm - Height: 1,425 mm - Weight (net): 220 kg

Stanje: novo, Pressure: 125Motor: 22Installation height: 500Stroke length (max.): 400Table size: 800 x 600 x 120Ram area: 800 x 600 x 300Table height: 850Dimensions (LxWxH): 1,600 x 2,000 x 3,200Weight approx.: 7,000Oil fill: 400Control / Key switch: 1. Setup mode Manual without light sensor (max. 10 mm/sec. speed) 2. Automatic (at full speed) with light sensor Main cylinder: Ø 220 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Auxiliary guides: 2 pcs Ø 50 mm Motor: 15 kW – 22 hp (IE-3) Pump: 48 liters / ASC Speed: Forward 120 mm/sec – Return 140 mm/sec – Pressure: 13 mm – 5 mm/sec Installation height: 500 mm Stroke length: 400 mm Table plate: 800 x 600 x 120 mm (with T-slots) (customized design possible) Ram plate: 800 x 600 x 300 mm (with T-slots & ribbed welding) Table height: 850 mm (floor to top of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10 – 125 tons) Speed adjustable via PLC Ksdpsmr Hpcsfx Al Nodk Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swivelling operator panel Safety PLC – SICK Light sensors SICK 700 + 150 mm Linear scale for setting stroke length 9” PLC screen – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) Double workspace lighting 8 free inputs & outputs on the PLC for external connections The press complies with machinery directives Hydraulic proportional valves Two-channel cable protection Operating manual & parts list (German) With lateral safety door (doors slide to the rear)

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 13.0 mm Total installed power: 18.5 kW Approx. weight: 11,700 kg Dimensions (LxWxH): 4,000 x 1,700 x 1,800 mm Technical data: - Sheet thickness: 13 mm - Cutting length: 3,200 mm - Cutting angle: 2.0° - Backgauge: motorized, 1,000 mm - Motor power: 18.5 kW - Length: 4,200 mm - Width: 2,050 mm - Height: 2,100 mm - Weight: 11,700 kg Features: - Swing cut design - NC preselection control ELGO P 40 T Touch - With backgauge and adjustable blade gap from the front using the EURO P 40 Touch control - Motorized backgauge up to 1,000 mm - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting line - Foot switch - Blade gap adjustment - Cutting line illumination - Wide support table with ball transfers - Folding finger guard, 1,000 mm - 1 side stop with T-slot - 2 sheet support arms with T-slot - Easy replacement and regrinding of the blades - Adjustable cutting length for efficient processing - Lower blade can be turned 4 times - Upper blade can be turned 2 times - Qualified customer service - Operating manual in ENGLISH Kdsdpsd Ab Hmofx Al Nsk - Machine and equipment in accordance with CE regulations

Stanje: novo, Sheet thickness: 25mm Bending length: 3100mm Top roll diameter: 390mm Technical specifications: - Hardened and polished rolls - Full body constructed from ST-52 steel - Four rollers symmetrically arranged - Hydraulically operated top cover for easy material removal - Digital display for bottom and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movement of the lower roll is hydraulically powered - Movable control panel - CE compliant Options: - Variable rotation speed EUR 4,681 - Material feed table EUR 3,400 - Oil cooler EUR 1,040 - Central support EUR 13,600 - Side supports EUR 10,540 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable bottom roll support system (for special customer requirements) Kdsdpjd Ab Rqofx Al Nok We have numerous references!

Stanje: novo, Sheet thickness: 40 mm Bending length: 2100 mm Upper roll diameter: 390 mm Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - Symmetrical 4-roll arrangement - Hydraulically operated top cover for easy material removal - Digital display for bottom and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movement of bottom roll powered hydraulically - Mobile control panel - Complies with CE standards Options: - Variable rotation speed EUR 4,681 - Material feeding table EUR 3,400 - Oil cooler EUR 1,040 - Central support EUR 13,600 - Side supports EUR 9,250 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable bottom roll support system (for special customer requirements) We have many references! Kodped Ab Rtjfx Al Nedk

Stanje: novo, Sheet thickness: 16 mm Bending length: 3,100 mm Top roll diameter: 330 mm Sheet length: 3,100 mm Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - 4 rolls arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulics and gearbox - Vertical movement of the lower roll hydraulically driven - Mobile control panel - In compliance with CE standards Kdedpfx Ajd Ab Rzel Nsk Options: - Variable rotation speed EURO 3,681 - Material feed table EURO 2,501 - Oil cooler EURO 1,040 - Central support EURO 8,600 - Side supports EURO 6,400 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements)

Stanje: novo, Sheet thickness: 6 mm Bending length: 4100 mm Upper roll diameter: 270 mm Technical data: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are symmetrically arranged - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movement of the lower roll is hydraulically powered - Mobile control console - In compliance with CE standards Options: - Variable rotation speed EUR 4,681 - Material feed table EUR 3,400 - Oil cooler EUR 1,040 - Central support EUR 8,300 - Side supports EUR 9,660 - Automatic material extractor Kodpfx Aed Ab R Rel Nodk - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Stanje: novo, Bending length: 3100 mm Sheet thickness: 40 mm Top roller diameter: 460 mm Technical specifications: - Hardened and polished rollers - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rollers - Portable control panel - Rollers are mounted with bearings Kdsdpod Ab Sqofx Al Nek - Upper roller cover, hydraulically openable and closable via control panel - All rollers are driven by hydraulic motor and planetary gearbox - Lateral movements are hydraulically powered Options: - Variable rotation speed EURO 5,858 - Material feed table on request - Oil cooler STD. - Central support EURO 18,750 - Side supports EURO 15,000 We have numerous references!

Stanje: novo, Bending length: 4100 mm Sheet thickness: 13 mm Top roll diameter: 360 mm Technical specifications: Kdedpfxed Ab Sze Al Nek - Hardened and polished rolls - Complete body made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control console - Rolls mounted with bearings - Upper roll cover hydraulically opening and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically operated Options: - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 12,516 We have many references!

Stanje: novo, Bending length: 2600 mm Sheet thickness: 25 mm Top roller diameter: 360 mm Technical specifications: - Hardened and polished rollers - Complete body made of ST-52 steel - Conical bending device - Digital display for side rollers - Portable control console - Rollers mounted with bearings Kdjdped Ab S Djfx Al Njk - Upper roller cover, hydraulically openable and closable via control panel - All rollers driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically powered Options: - Variable rotation speed EUR 4,682 - Material feed table on request - Oil cooler EUR 1,040 - Central support EUR 13,600 - Side supports EUR 9,200 We have numerous references!

Stanje: novo, Bending length: 2600 mm Sheet thickness: 13 mm Top roller diameter: 270 mm Ksdpfjd Ab Tdox Al Nedk Sheet length: 2600 mm Technical specifications: - Hardened and polished rollers - Complete body made of ST-52 steel - Conical bending device - Digital readout for side rolls - Portable control panel - Rollers mounted on bearings - Top roller cover, hydraulically openable and closable via control panel - All rollers driven by hydraulic motor and planetary gearbox - Lateral movements driven hydraulically Options: - Variable rotation speed EURO 4,682 - Sheet feeding table on request - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 6,690 We have many references!