Kaup 4T429-4-6 nakup rabljenega (84.203)

Stanje: dober (rabljeno), prevoženi kilometri: 315.294 km, moč: 309 kW (420,12 KM), prva registracija: 08/2010, vrsta goriva: dizel, konfiguracija osi: 8x4, medosna razdalja: 3.950 mm, gorivo: dizel, zavore: retarder, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, število prestav: 12, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.400 mm, Leto izdelave: 2010, Oprema: ABS, električno upravljanje oken, klimatska naprava, retarder, tempomat, žerjav, = Further Options and Accessories = - Aluminium fuel tank - Power brake booster - Speed limiter - Intarder - Air suspension - Parabolic suspension - Sun visor - Toolbox - Power take-off (PTO) = Notes = Volvo FM 420 8x4-4 Tridem, hub reduction, Euro 5 engine, Hiab crane 322 - 6, remote control, 6 hydraulic extensions, manual gearbox, air conditioning, cruise control, Belgian registration. = Additional Information = Hodpfx Aewwtk Rehujnl Front axle: Steering; Left tyre tread: 30%; Right tyre tread: 30%; Suspension: Leaf suspension Rear axle 1: Twin tyres; Left inner tread: 80%; Left outer tread: 80%; Right inner tread: 80%; Right outer tread: 80%; Reduction: Hub reduction (planetary axles); Suspension: Air suspension Rear axle 2: Twin tyres; Left inner tread: 80%; Left outer tread: 80%; Right inner tread: 80%; Right outer tread: 80%; Reduction: Hub reduction (planetary axles); Suspension: Air suspension Rear axle 3: Lift axle; Steering; Left tyre tread: 60%; Right tyre tread: 60%; Suspension: Air suspension Crane: Hiab 322-6 HIDUO, year of manufacture 2010, mounted at rear of chassis Technical condition: Good Visual condition: Good

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 124.000 km, prva registracija: 05/2019, vrsta goriva: dizel, konfiguracija osi: 6x2, gorivo: dizel, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, dolžina tovornega prostora: 6.300 mm, Leto izdelave: 2019, Oprema: centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, meglenke, navigacijski sistem, parkirni grelec, spojka prikolice, tempomat, žerjav, = Dodatne možnosti in oprema = - Aluminijast rezervoar za gorivo - Ojačevalec zavorne sile - Nizka raven hrupa Hnedpfx Aoutma Iehuol - Omejevalnik hitrosti - Hladilnik - Lahka aluminijasta platišča - Zračno vzmetenje - Radio/CD predvajalnik - Kamera za vzvratno vožnjo - Senčnik - Dodatno gretje (stacionarno) - Škatla za orodje - Ksenonska razsvetljava - Pogonska gred (PTO) - Centralno mazanje - Vlečna kljuka = Dodatne informacije = Konfiguracija osi Vzmetenje: zračno vzmetenje Prednja os: LM platišča; vodena Zadnja os 1: LM platišča Zadnja os 2: LM platišča; dvižna os; vodena Teže Lastna teža: 13.895 kg Nosilnost: 14.105 kg Skupna dovoljena masa: 28.000 kg Funkcionalno Dvigalo: HMF 2820-K6, letnik 2019, za kabino Proizvajalec nadgradnje: HMF 2820-K6 Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro

Stanje: dober (rabljeno), prevoženi kilometri: 316.594 km, moč: 235 kW (319,51 KM), prva registracija: 06/2015, vrsta goriva: dizel, konfiguracija osi: 6x2, medosna razdalja: 3.900 mm, gorivo: dizel, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, Leto izdelave: 2015, Oprema: ABS, AdBlue, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, tempomat, = Additional Options and Accessories = - Aluminum fuel tank - Tipping hydraulics - Radio/CD player - Sun visor - PTO (power take-off) - Central lubrication system = Remarks = MAN TGS 26.320 GARBAGE BOX ZOELLER MEDIUM XL 21.5, EURO 6, Hnedpfx Ajx I Rkcohusl M CAB, REAR CAMERA, CENTRAL LUBRICATION, GERMAN REGISTRATION, TRUCK IS IN EXCELLENT CONDITION MORE INFORMATION UPON REQUEST = Further Information = Technical Details Number of cylinders: 6 Axle Configuration Front axle: Steering; Tire tread left: 70%; Tire tread right: 70%; Suspension: leaf suspension Rear axle 1: Twin tires; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40%; Suspension: air suspension Rear axle 2: Steering; Tire tread left: 40%; Tire tread right: 40%; Suspension: air suspension Weights Unladen weight: 16,257 kg Payload: 9,743 kg Gross vehicle weight: 26,000 kg Condition Technical condition: good Visual condition: good Further Information Please contact Gerrit Haverhoek or Piet Haverhoek for further information.

Leto izdelave: 2010, stanje: rabljeno, Leto proizvodnje: november 2010 Novo: Ne Hedpfsxvbauex Ahuenl RABLJENE PRIKOLIČNE GUME 425/65 R 22.5 8 MM 150 EUR, 6 MM 125 EUR, 4/3 MM 100 EUR VKLJUČNO S PLATIŠČEM.

Leto izdelave: 2010, stanje: rabljeno, Leto izdelave: november 2010 Novo: Ne RABLJENE PRIKLOPNE GUME 425/65 R 22.5, PROFIL 4/6 MM, 100 EVROV NA KOS, ZA KMETIJSTVO ALI TRANSPORT. Hjdpfx Ahjxvbc Nsusnl

Stanje: novo, MODEL: GENIUS PRO B32.220 (220 ton x 3200 mm) CNC-osni krmiljenja: Y1, Y2, X, R-os s kompenzacijo ukrivljenja Upogibna sila: 220 ton Dolžina upogiba: 3200 mm Natančnost pozicioniranja: 0,005 mm Razdalja med stebri: 2700 mm Natančnost upogiba: ±2’/na meter Hod žarka: 200 mm Svetla višina: 460 mm Globina grla: 750 mm Širina mize: 120 mm Višina delovne mize: 1025 mm DELOVNE HITROSTI: ACCURL® EVO-GO HIBRIDNI SERVO SISTEM Hitri pomik: 180 mm/s Delovna hitrost: 0~15 mm/s Povratna hitrost: 160 mm/s ZADNJI PRISLON: Maks. pomik po osi X: 800 mm Maks. pomik po osi R: 250 mm Maks. pomik po osi Z: 3550 mm KAPACITETA: Hidravlični tlak: 275 bar Hibridni servomotor: 18,5 kW Delovna temperatura: 0 do +40 °C Skupne dimenzije: 3950×2050×2950 mm Hnodpfewpuftsx Ahusl Teža stroja: 12.200 kg Napajanje: AC 220V~480V, 3-faze, 50/60 Hz

Stanje: pripravljen za uporabo (rabljen), Kreislader MC-Digitalsteuerung 1. Station: 6 Platten Hsdpfx Aoq Ik Rujhuonl 2. Station: 4 Platten A76 Strom-Auslage

Stanje: rabljeno, Wickman 1-3/4" 6-vreten Serijska številka: 16814 Elektromagnetna sklopka Magazin za material in stojalo Navojno rezanje Hedpfjyzkf Hsx Ahuonl Transportni trak za ostružke 6 prečnih sani 4. pozicija: Logan univerzalni navojni sistem Očiščen in prebarvan Nedavno odstranjen iz proizvodnje Preverjen pod napajanjem Lahko opremljen glede na vaše zahteve

Stanje: novo, vrsta goriva: dizel, konfiguracija osi: 6x4, medosna razdalja: 3.500 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 680 l, barva: bela, vrsta prenosa: mehanski, število prestav: 16, Leto izdelave: 2025, Oprema: klimatska naprava, meglenke, spojka prikolice, tempomat, Dodatne možnosti in oprema Hjdew Dukxjpfx Ahuenl

Stanje: rabljeno, Leto izdelave: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical system 3x400V 50/60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable height-adjustable extraction hood – motorized control - Full nominal power at approx. 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Drive: 3-phase high-frequency motor, inverter-controlled - Rotation direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Max. saw blade Ø 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood Hodpfey Ih Rgjx Ahusnl - Profit H350 16.30: CNC machining center in gantry design (without tools), featuring digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made of thick-walled, electro-welded box sections. The steel ribbing inside the frame ensures high stability. - Machining area H350 16.30: Travel axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm pass-through height Axis positioning speeds: Depend on the selected safety system (see layout for details). - Dual-drive gantry - X-axis guidance system: The drive for the X-axis gantry is via a rack-and-pinion with helical crowned teeth – ensuring maximum precision. The reduction gearbox provides the highest machining and repeat accuracy. Bearings are precision, encapsulated ball bearing carriages running on hardened and ground linear guides. - Y-axis guidance system: Bearings are precision, encapsulated ball bearing carriages running on hardened and ground linear guides. The Y-axis is positioned via a ground ball screw. - Z-axis guidance system: Bearings are precision, encapsulated ball bearing carriages running on hardened and ground linear guides. The Z-axis is positioned via a ground ball screw. - Automatic central lubrication system: Grease is automatically and precisely delivered to the guide carriages of the X, Y, and Z axes as well as to the ball screws of Y and Z. Lubrication cycle is performed automatically after a defined interval. - 12-position linear tool changer on the left of the machine frame including a pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and provides sufficient space for milling tools. One aggregate station (configuration options, see layout). Max. tool diameter: 250 mm Max. tool length: 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in X-direction and 5 spindles in Y-direction. Horizontal 6 spindles: 4 spindles in X-direction and 2 spindles in Y-direction. Stroke = 70 mm Max. drill bit length = 70 mm, shank diameter = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – X-direction Max. saw blade diameter: 120 mm Max. bla...

Stanje: novo, Factory-new electric actuator from the renowned German manufacturer AUMA. Professional device designed for industrial automation, suitable for operating gate valves, valves, dampers, and industrial fittings. The actuator is in warehouse condition – unused. Equipped with a manual emergency handwheel and a robust industrial housing with a high IP67 ingress protection rating. Nameplate data – actuator: • Manufacturer: AUMA • Type: SAR 07.5-F10 • Comm. No.: 194452 • No.: 0402ND90010 • Protection class: IP67 • Output speed: 45 rpm • Closing torque (T Zu): 30–60 Nm • Opening torque (T Auf): 30–60 Nm • Lubrication: F1 • Operating temperature: -25°C to +60°C Hnedpey Skm Eefx Ahuol Nameplate data – motor: • Motor type: AD0R 63-4/80 • Article No.: Z011.859 • No.: 0402NM31789 • Supply voltage: 3~ 400V • Frequency: 50 Hz • Power: 0.37 kW • Current: Y 1.7 A • Cos φ: 0.58 • Operating mode: S4 – 25% ED 1200 cycles/h • Protection class: IP67 • Motor speed: 1400 rpm • Thermal protection: TH • Insulation class: F Application areas: • industrial automation • industrial fittings • gate valves and dampers • water supply installations • energy sector • technological systems Condition: new / warehouse stock The price refers to 1 unit.

Stanje: zelo dobro (rabljeno), Naprodaj profesionalna stroj za odrezovanje in glajenje cevi TUBOGRAT nemškega proizvajalca Tracto Technik Spezialmaschinen. Naprava je namenjena obdelavi koncev cevi ter odstranjevanju notranjih in zunanjih ostružkov. Idealna za delavnice, proizvodnjo in montažo. Trdna konstrukcija zagotavlja dolgo in zanesljivo delovanje. Tehnične specifikacije: Proizvajalec: Tracto Technik Spezialmaschinen KG Model: TUBOGRAT TG 138 Obseg premerov: 6 do 42 mm Hitrost vrtenja: 180 obr/min Smer vrtenja: levo Hodpfxeyvgp Ts Ahusnl Napajanje: 380 V Faze: 3 Frekvenca: 50 Hz Moč: 0,12 kW Tok: 0,4 A Stanje: Naprava v dobrem tehničnem stanju Vidne sledi uporabe Stroj deluje

Stanje: novo, Centrifugalna črpalka KSB ETANORM SYT ETNY065-040-200 NOVA 2024 25,6 m3/h 46 m Naprodaj visokokakovostna centrifugalna črpalka priznane nemške znamke KSB, model ETANORM SYT ETNY065-040-200. Naprava je popolnoma nova, skladiščena, v originalni embalaži KSB. Idealno za industrijske namene, vodne instalacije ter ogrevalne in hladilne sisteme. TEHNIČNI PODATKI Proizvajalec: KSB Model: ETANORM SYT ETNY065-040-200 Zmogljivost Q: 25,6 m3/h Dvižna višina H: 46 m Hitrost vrtenja: 2950 min⁻¹ Premer rotorja: 187 mm Material ohišja: EN GJS 400-15 Leto izdelave: 2024 Priključki: prirobnični STANJE Hjdpfxsywu Uqs Ahujnl Nova, neuporabljena, skladiščena Možni minimalni sledovi skladiščenja Originalna embalaža KSB UPORABA Industrijske instalacije Obtočne črpalke za vodo HVAC sistemi Ogrevalne in hladilne instalacije Črpalne postaje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: NR: 220.10.029.19, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 28 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, Oprema: CE označba, dokumentacija / priročnik, Naprodaj visokokakovostni robni lepilni stroj Format4 Tempora 60.06 EL – takoj pripravljen za delo! Dvignite svojo proizvodnjo na višjo raven s tem malo rabljenim robnim lepilnim strojem Format4 Tempora 60.06 EL v odličnem stanju. Stroj je zasnovan za industrijsko uporabo in zagotavlja izjemno natančnost ter popolno površino vsake plošče. - Visokonatančno avtomatsko lepljenje robov - Enota za predrezkanje za popolno pripravo roba - Zanesljiv in konstanten sistem lepljenja - Popolna obdelava: porezovanje, rezkanje, poliranje - Enostavno upravljanje in zanesljivo delovanje Vključene dodatne opreme: - Rdeč zračni rezervoar (kot je prikazano na fotografijah) - Dodatni ogrevani posoda za lepilo – idealna za hitro menjavo različnih barv lepila Stroj je skrbno vzdrževan, zelo malo rabljen in popolnoma operativen – pripravljen za neposredno uporabo v proizvodnji. Stroj je na voljo zaradi reorganizacije obrata. Za več podrobnosti ali ogled nas kontaktirajte. Hnsdpfjy Dg N Tjx Ahuel

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards Hnjdpfed Tbbdex Ahuel - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week Hodpefdkb Tofx Ahuenl - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm Hnedpfx Aed Tqalshuol - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Hnsdpjguk A Hefx Ahuel Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. Hodpfx Aeguk Dvshuenl The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: zelo dobro (rabljeno), Edgebander FORMAT 4 Tempora 60.06 glueBox - used Touchscreen Swiveling control panel Program memory Automatic pressure bridge adjustment Feed via transport chain Extendable workpiece support Diamond jointers for both climb and counter-rotation Glue pot located at the bottom Quick-change glue pot system Suitable for PUR adhesives GLUEBOX system Pressure unit with powered roller Cut-off saw with 2 high-frequency motors Cut-off saw, pneumatically tiltable Flush / radius milling unit Motorized positioning control for milling unit x-motion PLUS Corner rounding unit with diamond-coated cutters Radius scraper blade Radius scraper blade with motorized positioning Flat scraper blade Workpiece-activated flat scraper blade Infeed lock Spraying unit for release agent Spraying unit for lubricant Spraying unit for cleaning agent Year of manufacture: 2022 ----- Technical Specifications ----- Edging thickness, coil material: 0.4 - 3 mm Edging thickness, strip material: 3 - 6 mm Workpiece thickness: 8 - 60 mm Min. workpiece length: 140 mm Feed speed: 10 m/min Screen diagonal: 15 inches Jointers dimensions: D 80 x 64 mm Jointers power: 1.1 kW Cut-off saw power: 0.35 kW Milling station power: 0.75 kW Extraction port diameter: 80 + 160 mm Compressed air connection: 7 - 10 bar Total length: 4,872 mm Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm Weight: 1,500 kg Quality Info: - All settings checked - Adjusted to manufacturer specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Immediately ready for operation Hnjdpfeu R S Nwsx Ahujl

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 82.200 mm, višina police: 5.000 mm, število vrst polic: 6, višina okvirja: 5.000 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.250 kg, dolžina police: 13.700 mm, dolžina opore: 3.300 mm, 2 enostranske paletne regale + 2 dvostranske paletne regale (8 x M50113313-4) vsak 13,7 m dolžine, 5 m višine, 1,1 m globine, vsak z 4 polji, 3,3 m širokimi, po 3 prečne nivoje, nosilnost police 3250 kg. - 30 okvirjev (RM5011 - RAL5019) - 80 talnih plošč, podložni material, pritrditveni material - 20 distančnikov/povezovalnikov za dvovrstne regale (ZAbh20) - 120 talnih sider (ZZBA1210) Hodpfx Ahsyz Ibfjusnl - 144 posamičnih prečk (T33135 - RAL2008) - 0 zaščite pred udarci/naletne zaščite (ZRS40901) - 6 tabel nosilnosti (BSMcP) Okviri so vijačeni, niso predhodno sestavljeni Prevoz/dostava: - največ 20 delovnih dni po prejemu plačila - dostava do gradbišča/montažnega mesta - razklad s tovornjaka izvaja kupec z lastnim dvižnim vozilom - dostava na celotno ozemlje Zvezne republike Nemčije, razen na otoke! Dostave v države EU se dogovorijo individualno.

Stanje: novo, nosilnost na konzolno roko: 650 kg, višina police: 4.000 mm, skupna dolžina: 4.000 mm, skupna širina: 1.480 mm, nosilnost na stojalo: 1.950 kg, Data: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm deflector at the front - Axle spacing: 130 cm - NEW stock available for immediate delivery. Hodey Rkgcspfx Ahusnl - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights painted in RAL7016 - Cantilever arms painted in RAL3000 - Arms are hooked in - Arms adjustable in 100 mm increments - Levels: base + 3 storage levels (4 storage levels total) The uprights included in this racking set are pre-prepared free of charge for potential conversion to double-sided use. Advantages of the hooked-in cantilever arm: see images. Racking consists of: - 04 x uprights incl. base, approx. 400 cm made from IPE180 - 12 x cantilever arms, approx. 120 cm, profile 10 cm x 4 cm - incl. all necessary connecting elements and bolts Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT shown separately. Accessories such as floor anchors, collision protection, etc., can also be purchased from us. Transport: Delivery is available on request via our partner shipping company; costs depend on postal code. Assembly: Our trained staff are available to professionally assemble and dismantle your equipment if required. Our recommendation: Let us know what you need... We are happy to assist you with your projects, from planning and ordering to installation.

Stanje: rabljeno, Leto izdelave: 2013, številka stroja/vozila: 448582, skupna masa: 991 kg, nosilnost: 1.700 kg, tip motorja: nedoločen, proizvajalec: Kaup Hedpfx Ahjxvv S Ssuenl

Stanje: zelo dobro (rabljeno), Stanje: rabljeno, delujoče Proizvajalec: BÜHNEN / MELER Model: HB 6050-2 NI120 📋 Opis stroja: Hnodpfx Asy Aam Njhuol Na prodaj profesionalni lepilni agregat HOT-MELT BÜHNEN / MELER 6050, namenjen industrijskemu nanašanju lepila. Visokokakovostna naprava – evropska proizvodnja, uporablja se v: pakiranju pohištveni industriji lesnopredelovalni industriji proizvodnih linijah ⚙️ Tehnični podatki (iz tablice): Napajanje: 230V / 50-60 Hz 400V (3-fazno) Moč: do 4,7 kW Maks. temperatura: 200°C Maks. tlak: do 160 bar Izhodi: 2 Model: HB 6050-2 NI120 📦 Komplet vključuje: ✔️ Lepilni agregat BÜHNEN / MELER ✔️ 4 grelne cevi (celoten komplet!) ✔️ Kable in priključke, vidne na fotografijah 🔍 Stanje: predmet rabljen normalni znaki uporabe v dobrem tehničnem stanju notranjost rezervoarja vidna na slikah prodaja se natančno kot na fotografijah

Stanje: zelo dobro (rabljeno), Nudim profesionalni lepilni agregat BÜHNEN 6040, namenjen za industrijsko nanašanje lepil (npr. hot-melt). Naprava rabljena, v dobrem tehničnem stanju, z običajnimi sledmi uporabe. Zanesljiva nemška izdelava – idealno za proizvodne obrate, pakirnice, mizarje, tapetnike ipd. ⚙️ Tehnični podatki (iz tablice / vidni na fotografijah) Napajanje: 230V / 50 Hz Moč: 235 W Maks. tlak: do 160 bar Maks. temperatura: do 200°C Model: 6040 Proizvajalec: BÜHNEN GmbH (Nemčija) 📦 V kompletu: ✔️ Lepilni agregat BÜHNEN 6040 ✔️ 4 ogrevane cevi (komplet) ✔️ Kabli/priključki vidni na slikah ✔️ Krmilni in priključni elementi 🔍 Tehnično stanje: naprava rabljena Hodpfxjy Aagij Ahuonl vidne običajne sledi uporabe brez vidnih mehanskih poškodb notranjost rezervoarja vidna na fotografijah prodaja točno tako, kot na slikah