Hydac Betafit Hidravlični Filter nakup rabljenega (8.809)

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 15 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary gearbox * Folded parts can be easily removed thanks to the hydraulically opening head * Very easy operation with mobile control panel * Lower rolls’ positions can be easily read via two digital displays * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Rolling system with roller bearings and conical mechanism * Hydraulic balancing system for parallel movement of the shafts * Extended shaft ends to allow installation of section and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (hoist) support for large diameter bending operations * Hydraulic side supports for large diameter bending operations * Ground and polished rolls for special applications * Section bending rolls for profiles * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of the shafts TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 10/13 mm Bending: 13/15 mm Top & Bottom Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Hfsdjw Sld Rspfx Alfeg Bending Speed: 5 m/min Length: 5150 mm Width: 1500 mm Height: 1550 mm Weight: 9050 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 20 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls are moved up and down via hydraulic cylinders attached to the frame, allowing linear motion * Protected against overloading * Upper and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Easy removal of bent workpiece thanks to hydraulically opening head and automatic lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT Hfsdsw Smdfopfx Alfeg * Automation with NC and CNC control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 12/16 mm Bending : 16/20 mm Top & Bottom Rolls : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 5350 mm Width : 1900 mm Height : 1950 mm Weight : 14,450 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer zgornjega valja: 150 mm, premer stranskega valja: 130 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic upper roll opening head - Mobile control panel - Centrally driven rolls powered by motor - Hydraulic up/down movement for rear and lower rolls Hfsdpfxjxw D Udj Alfeg - Precision bending with braked main motor - Conical bending and pre-bending system - Lower and upper roll drive by planetary gearbox - Rear Roll Ball System to facilitate sheet movement - Compliance with EU safety directives - High-strength forged steel rolls made from certified SAE 1050 (CK45) steel - Hardened shafts - Digital readouts (2 units) - Operating manual OPTIONAL EQUIPMENT - Overhead crane for support during large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at shaft ends - NC control unit - Dual speed operation - Stepless speed adjustment - Ejector system - Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Rolling Capacity: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roller opening head Movable control panel Centrally driven rollers powered by motor Hydraulically movable rear roller and lower roller (up/down) Accurate bending with braked main motor Conical bending and pre-bending system Lower and upper rollers driven by planetary gearbox Rear roller ball system for easier sheet movement Compliance with EU safety directives High-strength forged steel rollers made of SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 pcs) User manual OPTIONAL EQUIPMENT Overhead crane for support during large diameter bending Hydraulic side supports for large diameter bending Ground and polished rollers Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 8/10 mm Bending: 10/12 mm Hjdew Slctepfx Alfofg Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375/1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 22 mm, STANDARD EQUIPMENT Hsdpfx Asw Slg Selfsfg * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary reducer * The hydraulically opening head allows for easy removal of bent workpieces * Very easy operation with movable control panel * The position of the lower rolls can be easily read via two digital displays * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with bearings * Hydraulic balancing system for parallel movement of the shafts * Extended shaft ends for mounting profile or pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special work * Rolls for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel movement of the shafts TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16/20 mm Bending : 20/22 mm Upper & Lower Roll : 300 mm Side Roll : 280 mm Motor Power : 11 kW Bending Speed : 5 m/min Length : 4100 mm Width : 1500 mm Height : 1550 mm Weight : 7400 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 400 mm, premer zgornjega valja: 400 mm, premer stranskega valja: 300 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 30 mm, STANDARD EQUIPMENT * The top, bottom, and side rolls move up and down linearly via hydraulic cylinders attached to the machine frame * Protected against overload * Top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Easy removal of bent parts thanks to the hydraulically opening head and automatic lifting shaft * Highly user-friendly operation via movable control panel Hodpfxsw Sl T Ss Alfofg * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed working system OPTIONAL EQUIPMENT * NC and CNC control for automation * Upper crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 20/25 mm Bending: 25/30 mm Top & Bottom Roll Diameter: 400 mm Side Roll Diameter: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, moč: 5 kW (6,80 KM), STANDARDNA OPREMA Varjeno ohišje iz jeklene konstrukcije Trije valji z motornim pogonom Iz posebnega visoko odpornega materiala, kaljeni in brušeni valji Horizontalni in vertikalni delovni položaj Hjdpsw Smibefx Alfjfg Kaljeni standardni valjčni koluti Ločena premična upravljalna plošča 3-smerne mehanske ročne stranske podpore Natančno upogibanje z motorjem z zavoro 2 digitalna prikazovalnika IZBIRNA OPREMA Valjčni koluti za krivljenje cevi in profilov Izbirne dvoosne hidravlične stranske podpore Avtomatizacija z NC krmiljenjem TEHNIČNE LASTNOSTI Premer zgornje gredi: 80 mm Premer spodnje gredi: 70 mm Premer valjčnega kolesa: 245 mm Delovna hitrost: 7 m/min Moč motorja: 4,75 kW Dolžina: 1500 mm Širina: 1000 mm Višina: 1400 mm Teža: 1645 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 550 mm, premer zgornjega valja: 550 mm, premer stranskega valja: 450 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 70 kW (95,17 KM), trajanje garancije: 12 meseci, Oprema: kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * The bottom and side rolls are hydraulically operated with pistons attached to the frame, providing linear up-and-down movement * Protected against overload * The top and side rolls are driven by hydromotors and planetary gearboxes (three-roll motor drive) * The positions of the rolls are easily read with three digital indicators * Hydraulic opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation via movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Hsdpfx Aljxbzptjfofg Pre-bending : 50/40 mm Bending Thickness : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, hod: 600 mm, širina mize: 800 mm, dolžina mize: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 200 H-Frame Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guide H-frame construction, loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 200 model is designed for applications requiring medium to high tonnage, offering reliable performance and long service life. CHP Series – Structural Features CHP series presses are engineered for heavy-duty applications. The frame and load-bearing parts are stress-relieved by vibration. Bronze Zr14 slide bearings provide smooth ram movement and long-term precision. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Vibratory stress-relieved frame and load-bearing components - Bronze Zr14 slide bearings - WPQR & WPS certified weld applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and production in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7") - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 200 Hjdpfx Alsx N T D Usfjfg Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 200 Tons Movable Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relieving: Vibration stress relief Weld Application: WPQR and WPS certified, accredited by TÜRK-AK, EN ISO 15614-1:2017 (inspected by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Height: 3800 mm Approximate Width: 2950 mm Approximate Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7" Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 8 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, moč: 30 kW (40,79 KM), hod: 310 mm, obratovalna hitrost: 8 mm/s, hitrost vzvratne vožnje: 80 mm/s, višina mize: 1.055 mm, globina grla: 510 mm, delovna širina: 6.100 mm, upogibna sila (maks.): 400 t, razdalja med stojali: 5.100 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R – 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam type) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-channel dies • Backgauge X travel up to 1000 mm • AKAS or DSP front laser safety system • Additional backgauge fingers • Additional backgauge supports TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 400 Bending Length (mm) 6100 Distance Between Side Frames (mm) 5100 Stroke (mm) 310 Daylight (mm) 535 Throat Depth (mm) 510 Table Height (mm) 1055 Approach Speed (mm/sec) 100 Return Speed (mm/sec) 80 Pressing Speed (mm/sec) 8 Oil Tank (Lt) 400 Hfjdpfxex Nn Syj Alfsg Machine Weight (kg) 33000 Main Motor (kW) 30 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam type) Safety System Laser front safety Origin Turkey

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 400 t, hod: 800 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 400 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial press solutions designed with high rigidity for sheet metal forming, straightening, assembly, and die pressing applications. The H-frame structure with 8 slide guides ensures that high forces generated during pressing are evenly distributed, resulting in stable and repeatable operation. The CHP 400 model is engineered to deliver long-lasting and reliable performance for heavy-duty applications requiring high tonnage. CHP Series – Structural Features CHP series presses are engineered for heavy-duty operations. The frame and supporting components are stress-relieved using vibration methods. Bronze Zr14 slide bearings provide even load distribution throughout ram movement, which ensures sustained precision over time. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 slide guides - Stress-relieved frame and supporting components by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and produced in accordance with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring on display - Cooling system - Off-line filtration unit - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 400 Type: Steel construction, 8-slide H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 400 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Squareness Tolerance: 60 micron/meter Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Weld Stress Relief: Vibration stress relief Welding Application: TÜRK-AK accredited WPQR and WPS certified to EN ISO 15614-1/2017 welding practices (certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø450 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 5600 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1400 mm Hodpsx N T Hpsfx Alfofg Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 19.5 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 800 t, hod: 800 mm, širina mize: 1.500 mm, dolžina mize: 2.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 800 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-slider H-frame design ensures balanced distribution of high forces generated during pressing, offering maximum rigidity and long-lasting use. The CHP 800 model has been developed to deliver reliable and stable performance for high-capacity production lines. CHP Series – Structural Features CHP series presses are engineered with the demands of heavy industry in mind. The frame and main load-bearing components are stress-relieved using vibration methods. Bronze Zr14 slide bearings ensure even load distribution and precise operation throughout the ram movement. ⚙️ Standard Equipment Steel construction, 8-guide H-type press body Stress-relieved frame by vibration Bronze Zr14 slide bearings TÜRK-AK accredited WPQR & WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) Design and manufacturing in compliance with CE standards PLC-controlled hydraulic system Touch panel display (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronically monitored filter contamination warning Display of hydraulic unit oil temperature and system status on screen Cooling system Off-line filtration Two-hand control system Light curtain (standard for operator safety) SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 800 Type: Steel construction, 8-guided H-frame press type Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Hsdpfxox N T Nko Alfefg Capacity (Ram): 800 Tons Moving Table Dimensions: 1500 × 2000 mm Fixed Table Dimensions: 1500 × 2000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress relieving Welding: WPQR and WPS certified, EN ISO 15614-1/2017, accredited by TÜRK-AK (welds are supervised by certified welding coordination engineers in accordance with EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø390 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approximate Height of Press: 6000 mm Approximate Width of Press: 3350 mm Approximate Depth of Press: 2700 mm Lower Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC System: DELTA Touch Screen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 45 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 2.000 t, hod: 1.000 mm, širina mize: 1.500 mm, dolžina mize: 2.500 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type hydraulic presses are developed for heavy-duty forming, deep drawing, spinning, and die applications that require very high tonnage. The 8-guideway H-frame construction ensures maximum rigidity during pressing, maintaining parallelism and perpendicularity tolerances throughout the long stroke. The CHP 2000 model, with its large table dimensions, high-capacity hydraulic system, and powerful motor structure, is a reliable and long-lasting solution for automotive, defense industry, heavy industry, and high-tonnage production lines. The frame is stress-relieved by vibration to ensure stable operation. ⚙️ Standard Equipment • Steel construction, 8-guideway H-frame press type • Frame stress-relieved by vibration • Bronze Zr14 guideway bearings • Welding applications approved by TURK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) • Design and production in accordance with CE standards • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Cooling system • Off-line filtration • Safety systems for operator protection • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 2000 • Type: Steel construction, 8-guideway H-frame press type • Frame Material: St52 – ERDEMİR • Guideway Bearings: Bronze Zr14 • Capacity (Ram): 2000 Tons • Moving Table Dimensions: 1500 × 2500 mm • Fixed Table Dimensions: 1500 × 2500 mm • Parallelism Tolerance: 120 micron/m • Perpendicularity Tolerance: 60 micron/m • Stroke (Ram): 1000 mm Hedpfx Aox N T Srjlfofg • Min. Daylight: 200 mm • Max. Daylight: 1200 mm • Weld Stress Relief: Vibration stress relief • Welding Certification: EN ISO 15614-1/2017, WPQR, and WPS approved by TURK-AK accredited certification • Max. Operating Pressure: 250 Bar • Total Motor Power: 180 kW – IE3 • Main Pump: 140 cm³ – REXROTH or PARKER • Fast Descent Speed (Moving Table): 150 mm/s • Spinning Speed (Moving Table): 12 mm/s • Return Speed (Moving Table): 170 mm/s • Main Cylinder Bore: Ø720 mm – Ck45 (2 units) • Auxiliary Acceleration Cylinders: 2 units • Approximate Press Height: 6300 mm • Approximate Press Width: 3850 mm • Approximate Press Depth: 2500 mm • Bottom Table Height from Floor: 1500 mm • Pre-fill Valve: NG 200 • Hydraulic Unit: REXROTH or PARKER • Cooling System: EMMEGI – CIESSE – PARKER • Off-line Filtration: REXROTH or PARKER • Linear Scale: NOVATECHNIK or TURCK • PLC Application: DELTA • Touchscreen Panel: DELTA 7” • Switchgear Components: SIEMENS – SCHNEIDER • Approximate Weight: 95 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium gauge sheet, aluminum, or stainless materials Highly suitable for bending round and various diameter materials Lower roll and side rolls move hydraulically up and down in direct linear motion Protected against overloading The top roll is driven by an electric motor and planetary gearbox. The lower roll is driven by a cardan coupling system. Two rolls are driven The positions of the rolls are easily read with three digital displays The piece can be easily removed thanks to the hydraulically opening head Very easy operation with the mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of the rolls Complies with EU safety regulations and bears the CE mark Operating manual OPTIONAL EQUIPMENT Remote assistance via NC control Overhead crane (elevator) for support during large diameter bending Hydraulic side supports for support during large diameter bending Ground and polished rolls Dual Speed Adjustment System Stepless speed adjustment Hydraulic motor-driven rotation Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 l Length: 4000 mm Width: 1500 mm Hodpsw Slxzofx Alfofg Height: 1370 mm Weight: 5350 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 460 mm, premer zgornjega valja: 460 mm, premer stranskega valja: 380 mm, dolžina valja: 4.100 mm, najv. debelina pločevine: 25 mm, moč: 38,5 kW (52,35 KM), STANDARD EQUIPMENT * The lower, top, and side rolls move linearly up and down by pistons hydraulically attached to the frame * Protected against overloading * Top and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * The positions of the rolls are easily readable via three digital displays * The hydraulically opening head and the automatically lifting shaft make it easy to remove the bent piece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK50) induction-hardened, forged, or rolled steel shafts * Conical bending system * Central lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system Hsdpow Sl I Nofx Alfjfg OPTIONAL EQUIPMENT * Automation with NC and CNC control * Top crane (elevator) for support in large diameter bending * Hydraulic side supports for support in large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 4100 mm Pre-Bending Thickness : 16/20 mm Bending Thickness : 20/25 mm Top & Bottom Roll : 460 mm Side Roll : 380 mm Motor Power : 38.5 kW Bending Speed : 1.5 - 5 m/min Length : 6950 mm Width : 2300 mm Height : 2350 mm Weight : 29500 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 25 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulic pistons attached to the frame * Protected against overload * Upper and side rolls are driven by a hydromotor and planetary gearbox (3-roll motor-driven) * Roll positions can be easily read with three digital readouts * The hydraulically opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC automation control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length : 2550 mm Pre-bending : 16/20 mm Bending : 20-25 mm Upper & Lower Roll : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 4850 mm Width : 1900 mm Hodpfxsw Smb Rs Alfjfg Height : 1950 mm Weight : 12800 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 280 mm, premer zgornjega valja: 280 mm, premer stranskega valja: 220 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 16 mm, STANDARD EQUIPMENT * The lower, upper, and side rolls move vertically via pistons hydraulically connected to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotor and planetary gearbox (3 rolls motor-driven) * Roll positions are easily read with three digital displays * The hydraulically opening head and automatic rising shaft allow the workpiece to be easily removed * Easy operation with movable control panel Hodpew Smfcsfx Alfjfg * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Central lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) support for large-diameter bending * Hydraulic side supports for large-diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special jobs * Stepless speed control system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 10/12 mm Bending: 12/16 mm Top & Bottom Roll Diameter: 280 mm Side Roll Diameter: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, moč: 8 kW (10,88 KM), STANDARDNA OPREMA Varjeno jekleno ohišje Trije valji z motornim pogonom Osi iz posebenega visokotrdnega materiala, termično obdelane in brušene Vodoravni in navpični delovni položaj Kaljeni standardni valjčni elementi Ločena premična upravljalna plošča Mehanski ročni stranski nasloni, premični v 3 smereh Natančno krivljenje z motorjem z zavoro Dva digitalna prikazovalnika IZBIRNA OPREMA Valjčni elementi za krivljenje cevi in profilov Opcijski dvoosni hidravlični stranski nasloni Avtomatizacija z NC-krmiljenjem TEHNIČNE KARAKTERISTIKE Premer valjev: 100 mm Hfjdpfew Smi Ijx Alfsg Premer valjčnih elementov: 315 mm Delovna hitrost: 7 m/min Moč motorja: 7,5 kW Dolžina: 2000 mm Širina: 1450 mm Višina: 1700 mm Teža: 3650 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 1.550 mm, delovna širina: 1.550 mm, najv. debelina pločevine: 15 mm, najv. debelina jeklene pločevine: 15 mm, moč: 7,5 kW (10,20 KM), trajanje garancije: 12 meseci, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary gearbox * Folded parts can be easily removed thanks to the hydraulically opening head * Very easy operation with movable control panel * Position of lower rolls can be easily read with two digital indicators * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with bearings * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends to mount profile and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special applications * Rollers for bending profiles * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-Bending: 10/12 mm Bending: 12/15 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Motor Power: 7.5 kW Bending Speed: 5 m/min Hfjdoxbzr Ujpfx Alfog Length: 3500 mm Width: 1200 mm Height: 1370 mm Weight: 3600 kg

Stanje: novo, Leto izdelave: 2025, moč: 22 kW (29,91 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 110 mm/s, višina mize: 955 mm, globina grla: 410 mm, delovna širina: 4.100 mm, upogibna sila (maks.): 320 t, razdalja med stojali: 3.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features Hfedpfxsx Nn I Us Alfeg • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam type) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-groove V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-groove dies • Rear gauge X travel 1000 mm • AKAS or DSP front safety system with laser beam • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATION VALUE Bending Force (Ton) 320 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Approach Speed (mm/s) 150 Return Speed (mm/s) 110 Pressing Speed (mm/s) 10 Oil Tank (L) 290 Machine Weight (kg) 16800 Main Motor (kW) 22 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam type) Safety System Front laser safety Origin Turkey

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 2.500 t, hod: 1.000 mm, širina mize: 1.800 mm, dolžina mize: 2.600 mm, sila umika: 800 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 2500/800 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Gib General Description The CRONOSSTECH CHSP series H-type hydraulic forming presses are developed for heavy-duty deep drawing applications requiring very high tonnage, large bolster size, and precise blank holder force. The 8-gib H-frame body structure ensures high rigidity during pressing, maintaining parallelism and squareness tolerances throughout the long stroke during the ram and bolster movements. The CHSP 2500/800 model delivers maximum stability, controlled material flow, and repeatable production performance in large and deep drawing dies with its 2500-ton main ram and 800-ton blank holder capacity. The vibratory stress-relieved steel frame is designed for long-lasting and reliable operation under heavy industrial conditions. ⚙️ Standard Equipment • Steel construction, 8-gib H-frame press body design • Vibratory stress-relieved body structure • Bronze Zr14 gib guides • WPQR and WPS certified welding procedures with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen panel • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter clog indicator • On-screen hydraulic unit oil temperature and system status monitoring • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Heavy-duty industrial safety systems 📐 Technical Specifications – CHSP 2500/800 Type: Steel construction, 8-gib H-frame press body Frame Material: St52 – ERDEMIR Gib Guide: Bronze Zr14 Hedpsx N Uk Aefx Alfjfg Capacity (Ram / Blank Holder): 2500 / 800 Ton Movable / Fixed Bolster: 1800 × 2600 mm Parallelism / Squareness: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø565 mm – Ck45 (4 units) Blank Holder Cylinder: Ø450 mm – Ck45 (2 units) Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approx. Weight: 132 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 300 t, hod: 600 mm, širina mize: 1.000 mm, dolžina mize: 1.200 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 300 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its 8-guided H-frame structure, high loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 300 model is designed to provide long-lasting and reliable performance for medium-to-high tonnage production processes. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operation in mind. The frame and supporting components are stress-relieved via vibration methods. Bronze Zr14 guide bushings ensure smooth load distribution during ram movement, contributing to long-term precision retention. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Vibration stress-relieved frame and supporting parts - Bronze Zr14 guide bushings - WPQR & WPS approved welding by TÜRK-AK accredited procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in conformity with CE standards - PLC-controlled hydraulic system - 7'' DELTA touch panel display - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic unit oil temperature and system status display - Cooling system - Off-line filtration - Dual-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 300 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 300 Tons Moving Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Squareness Tolerance: 60 micron/meter Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration stress-relieved Welding Procedure: TÜRK-AK accredited and WPQR & WPS certified welding according to EN ISO 15614-1/2017 (supervised by certified welding coordination engineers as per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Pressing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø390 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Machine Height: 4400 mm Approximate Machine Width: 3250 mm Approximate Machine Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 150 Hodpfxox N T E Ej Alfsfg Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC System: DELTA Touch Panel Display: DELTA 7'' Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 10.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 250 t, hod: 800 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, sila umika: 80 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Flow Forming) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to provide controlled material flow in sheet metal forming, deep drawing, and flow forming applications. The H-frame structure with 8 guideways ensures maximum rigidity during pressing; parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 250/80 model is designed for medium to high tonnage deep drawing and flow forming operations, featuring a main ram capacity of 250 tons and a lower cushion (pot) capacity of 80 tons. The frame construction is stress-relieved by vibration for long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame type press body - Vibration stress-relieved frame structure - Bronze Zr14 slideway bearings - WPQR and WPS approved welding applications by TÜRK-AK accredited sources (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC controlled hydraulic system - Touchscreen operator panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic centralized lubrication system - Electronic filter contamination monitoring - Hydraulic unit oil temperature and system status monitoring via display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching materials 📐 Technical Specifications – CHSP 250/80 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Guideway Bearings: Bronze Zr14 Capacity (Ram): 250 Tons Hedpfx Alsx N Uaqjfofg Capacity (Cushion): 80 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 800 mm Stroke (Cushion): 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress relief Welding Application: WPQR and WPS approved and TÜRK-AK accredited EN ISO 15614-1/2017 (Welding operations are supervised by “welding coordination engineers” certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/sec Moving Table Flow Forming Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion Forward Speed: 30 mm/sec Main Cylinder Bore: Ø360 mm – Ck45 Cushion Cylinder Bore: Ø200 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Machine Height: 4200 mm Approx. Machine Width: 3250 mm Approx. Machine Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Measurement Ruler: NOVATECHNIK or TURCK PLC Control: DELTA Touchscreen Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approx. Weight: 18 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 600 t, hod: 1.000 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, sila umika: 200 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 600/200 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting design for controlled material flow in sheet metal forming, deep drawing, and forming operations. The 8-gibbed H-frame construction ensures maximum rigidity throughout the pressing cycle, maintaining parallelism and perpendicularity tolerances consistently along the full stroke length. The CHSP 600/200 model, featuring a 600-ton main ram and a 200-ton lower blankholder (cushion), is designed to provide full control over both die and workpiece during high-tonnage deep drawing and forming operations. The frame construction is stress-relieved by vibration to ensure long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-gibbed H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 gib bearings - WPQR and WPS certified welded construction with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing to CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electrically monitored filter contamination warning - Hydraulic unit oil temperature and system status monitoring on display - Cooling system - Off-line filtration - Integrated safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 600/200 Type: Steel construction, 8-gibbed H-frame Frame Material: St52 – ERDEMİR Gib Bearing: Bronze Zr14 Capacity (Ram): 600 Ton Capacity (Cushion): 200 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibration stress-relief Welding Process: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1/2017, Supervised by certified “welding coordination engineers” as per EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 55 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Approach Speed: 150 mm/s Moving Table Forming Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Inner Diameter: Ø550 mm – Ck45 Cushion Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 5900 mm Approximate Press Width: 3250 mm Approximate Press Depth: 2300 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Encoder: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Hjdpfx Aljx N Uhzefefg Approximate Weight: 35 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 200 t, hod: 800 mm, širina mize: 1.000 mm, dolžina mize: 1.000 mm, razmak između stupova: 1.000 mm, sila umika: 70 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 200 / 70 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description Hjdpox N Umqofx Alfsfg The CRONOSSTECH 200 / 70 ton four-column hydraulic deep drawing press is a high-rigidity hydraulic press solution designed for metal forming, deep drawing, and precision pressing applications. The ST52-grade steel welded frame undergoes stress relief by vibration to ensure long-term parallelism and perpendicularity tolerances during extended operations. The ram and cushion systems operate independently; stroke and pressure settings can be precisely controlled via a touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motors, and PLC control, the machine offers high efficiency and reliable operation. Maintenance requirements are minimized through the automatic lubrication system and electronic filter contamination warnings. With its 200 / 70 ton capacity, this model is the ideal industrial press solution for medium and heavy-duty metal forming, deep drawing, and die applications. Key Advantages - Rigid four-column press body - Independent stroke and tonnage adjustment for ram and cushion - Full control via touchscreen panel - High precision and repeatability - Long-lasting and low-maintenance design Fields of Application - Metal forming operations - Deep drawing applications - Die trial and production lines - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs. induction-hardened, chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 200 tons CAPACITY (CUSHION): 70 tons DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 800 mm STROKE (CUSHION): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 900 mm WELDING STRESS RELIEF: Vibration stress relief WELDING PRACTICE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 bar TOTAL MOTOR POWER: 22 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT: 150 mm/s FORMING SPEED: 12 mm/s RETURN SPEED: 170 mm/s CUSHION TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 320 mm – Ck45 CUSHION CYLINDER BORE: Ø 190 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm FRONT CHARGING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 14.5 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.