Holder Drugi nakup rabljenega (10.636)

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni nosilec orodja SK40-12×50-K, skladen z normo DIN 69871 AD/B. Vsak nosilec je opremljen z nameščenim rezkalnikom (vidno na fotografijah). Tip vpenjanja: SK40. Puša: Ø12 mm. Dolžina vpetja: 50 mm. Standard: DIN 69871 AD/B. Stanje: rabljeno, popolnoma delujoče, pripravljeno za uporabo. Poudarjam, da je na voljo več kosov, vsi v isti dimenziji Ø12×50. Redpfx Aoxcg H Hegtst

Stanje: zelo dobro (rabljeno), Prodajam profesionalna držala za rezkalne glave blagovnih znamk HOLEX (Hoffmann Group) in ORION. • Tip SK40 Ø6-50 (Weldon – stranski vijak) • Standard DIN 69871 AD – centralno hlajenje skozi vreteno • Premer vpenjanja: Ø6 mm • Dolžina: 50 mm • Uravnoteženost G 6.3 – do 12.000 vrt/min (HOLEX) • Zelo dobro ohranjeno, rabljeno – popolnoma delujoče • Nekatera držala so v kompletu z rezkalniki / svedri. Rsdpfxexcgzde Agtjt

Stanje: zelo dobro (rabljeno), Prodajam profesionalno rezkalno držalo ORION – nemška kakovost in natančnost. • Tip SK40 Ø10-100 (Weldon) • Standard DIN 69871 AD/B – hlajenje skozi vreteno • Skupna dolžina 100 mm • Pritrditev za orodja Ø10 mm (stranski vijak) • Priloženo orodje – rezkar / sveder (vidno na sliki) • Zelo dobro ohranjeno, rabljeno, popolnoma funkcionalno. Držala ORION so idealna rešitev za CNC obdelovalne centre in rezkalne stroje s SK40 stožcem. Rjdpfx Agoxcgytetot

Stanje: zelo dobro (rabljeno), Naprodaj profesionalna orodna držala SK40 ER40 priznanih proizvajalcev, kot so Diebold in ZÜRN – Nemčija. Držala so popolna, nekatera opremljena s pušami in orodjem (svedri, rezkarji, navojni rezalniki). Tip držala: SK40 – ER40. Med modeli: TC40xER40x70-AD. Proizvajalci: Diebold / ZÜRN Germany. Zelo dobro ohranjeno, tehnično brezhibno – pripravljeno za delo. Trdna in precizna izdelava, nemška premium kakovost. Uporaba: CNC obdelovalni centri, rezkalni stroji, orodjarske delavnice. Redpfx Ajxcbxqogtst

Stanje: zelo dobro (rabljeno), Naprodaj posamezni nosilec TC40xER16x100-AD (standard SK40) priznanega nemškega proizvajalca ZÜRN. Vsak nosilec je kompleten, opremljen s tulejo ER16 in nameščenim orodjem (sveder ali rezkar – skladno s fotografijo). Tip nosilca: TC40xER16x100-AD (SK40). Tuleja: ER16 – ZÜRN Germany. Delovna dolžina: 100 mm. Proizvajalec: Made in Germany. V kompletu je orodje – pripravljeno za uporabo. Zelo dobro ohranjeno, original, preverjeno. Uporaba: CNC obdelovalni centri, rezkalni stroji, orodjarske delavnice. Rjdjxcb Daepfx Agtjt

Stanje: zelo dobro (rabljeno), Profesionalni držala priznane znamke GARANT (Hoffmann Group). Model 300230 6 SK40-6-100 – premer vpenjanja Ø6 mm, dolžina 100 mm. • Stožec SK40 – CNC standard • Premer vpenjanja Ø6 mm • Dolžina držala 100 mm • Največja hitrost vrtenja 25.000 obr/min • Visoka natančnost in stabilnost vpenjanja • Rabljeno, delujoče, pripravljeno za uporabo. -- PODANA CENA ZA 1 KOS -- Rsdpfxjw Sy D Ee Agtot

Stanje: zelo dobro (rabljeno), Izdelan iz težke litine – visoka togost in vzdržljivost. Delovna odprtina cca 120 mm (izmerjeno z merilnim instrumentom). Nastavljivi čepi z vrtljivimi konicami. Pribitje skozi odprtine v osnovi – zanesljiva in stabilna pritrditev. Zelo dobro stanje, popolnoma funkcionalen in pripravljen za uporabo. Odlično se obnese kot podpora pri obdelavi gredi, cevi, palic in drugih elementov, ki med struženjem potrebujejo oporo. Rodpfxjw Sfpte Agtot

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Various, as-new VDI40 tool holders with cylindrical bore, used tool holders, all in very good tested condition, top quality, from various manufacturers, including ISCAR. Position 1) Order number: 401_404_E2 Available: 4 pcs Tool holder for cylindrical tools / boring bars / drills: Mounting bore: ø32mm Price each: €45.00 Position 2) Order number: 405_E2_01 Available: 1 pc Tool holder for cylindrical tools / boring bars / drills: Mounting bore: ø31mm Price each: €45.00 Position 3) Order number: 406_407_408_E2_03 Available: 3 pcs Tool holder for cylindrical tools / boring bars / drills: Mounting bore: ø25mm Price each: €45.00 Position 4) Order number: 409_E2_01 Available: 1 pc Tool holder for cylindrical tools / boring bars / drills: Mounting bore: ø20mm Price each: €45.00 Position 5) Order number: 410_411_E2_02 Available: 1 pc Tool holder for cylindrical tools / boring bars / drills: Mounting bore: ø8mm Price each: €45.00 Dimensions: D = 83 mm Rjdpfxoyuv Ulo Agtet d-2 = 83/40 mm (45.52) d-4 = xx (8,10,12, 20,25,32,40mm) internal diameter H = 32.5 mm L1 = 75 L2 = 22 l-4 = 53 Form E2 For drilling tools with cylindrical shank With both internal and external coolant supply Surface hardened, blackened and ground

Stanje: rabljeno, Drill chuck Thread-cutting chuck with compensation for dies Collet chuck ER 25 Collet chuck ER 32 Collet chuck OZ 2-16 adjustable Morse taper 1 (MT1) Morse taper 2 (MT2) Morse taper 3 (MT3) Morse taper 4 (MT4) Rsdpjdbmxzofx Agtjt Adjustable Morse taper 2 (MT2 adjustable) E1 12 E1 16 E1 20 E1 25 E1 32 E1 40 E2 6 E2 10 E2 12 E2 16 E2 20 E2 25 E2 40 B2 B3 B7 Setup device C1 C2 C3 Internal turning tool Capto C3 straight Capto C3 angled

Stanje: zelo dobro (rabljeno), Quick-change holder (28486) Manufacturer: EMUGE Type: KSN4-MK4 compatible with Bilz WES 3 holders Rsdpfxotrnigj Agtot

Stanje: skoraj kot novo (rabljeno), Quick-change tool holder NOFIX for retrofitting to milling machines, boring mills, etc. For spindle mounts ISO / SK 40 Siegfried Volz Machine Tools Rjdpfxov Saaie Agtet Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: zelo dobro (rabljeno), Set končnih priključkov in univerzalnih nosilcev sistem KOBA Z 101 Hommelwerke v kovčku (108149) Redpfsylkdpex Agtot

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Bonjour, Nous proposons à la vente des dispositifs de serrage d’occasion des marques Erowa et 3R. Adaptés pour l’électroérosion par enfonçage et le fraisage. Vous trouverez ci-dessous une liste des pièces disponibles (voir images jointes pour plus de détails) : ER-034387 QuickChuck 50 sur un bloc de bridage (image 03/04) ER-012299 Mandrin de serrage rapide NSF sur plaque (image 05/06) ER-010562 Palpeur à bille Ø 2 mm (image 07/08) ER-010723 Pige de contrôle ITS 50 (image 09) Support F-Tool avec carré 25 mm (image 10/11) Palette MTS (image 12/13) ER-008566 Porte-pinces 50 (image 14/15) Rsdpfxoyl Nr So Agtst ER-010495 Règle d’alignement carré 15 (image 16/17) Étau avec plateforme Erowa (image 18/19) Support Erowa avec rainure hexagonale, par ex. pour support de comparateur (image 20/21) Support Erowa pour serrages flexibles (image 22/23) Système 3R : étau de haute précision / peut être adapté à Erowa sur demande (image 24/25) Toutes les pièces ont été entièrement vérifiées et sont fonctionnelles. N’hésitez pas à nous contacter pour toute question ou demande d’intérêt.

Stanje: rabljeno, Nosilci orodja VDI 60 Rodpfjx Em Ncsx Agtst

Stanje: rabljeno, Tool holders SK 50 DIN 69871 and DIN 2080 Rsdsb E Evqjpfx Agtot

Stanje: rabljeno, Details on request. Redpfx Ajb E Evmjgtot

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Pos1→ Št.: 1405 *1xVDI40→ Držalo orodja C4 skoraj novo Št. C4-RC2040-51030 Teža/kos: ca. 4 kg Neto cena na kos: 350€/kos ----- Skoraj nova, različna držala za orodje: skupaj 12 držal 3x notranji izvrtalni držalec → 150,00€/kos 8x zunanji stružni držalec → 150,00€/kos _____ Stružni držalec, držalo za orodje, stružno orodje, držalo za stružni nož, Redjyub Eiepfx Agtst držalo za orodje, -Različne vrste: glej slike, dodatne fotografije na zahtevo -Proda se le komplet Stroški dostave po dogovoru

Stanje: rabljeno, prevoženi kilometri: 21.000 km, moč: 58 kW (78,86 KM), prva registracija: 11/1989, skupna masa: 3.500 kg, vrsta goriva: dizel, barva: rdeča, naslednji pregled (TÜV): 03/2028, vrsta prenosa: mehanski, širina tovornega prostora: 1.730 mm, dolžina tovornega prostora: 3.250 mm, višina nakladalnega prostora: 1.830 mm, Leto izdelave: 1989, skupna dolžina: 5.350 mm, skupna širina: 1.975 mm, skupna višina: 2.700 mm, število sedežev: 2, 1st hand – German voluntary fire brigade. Rodpfx Ajw Tpfuogtst New TÜV, valid until 03/2028. An appraisal in accordance with §23 StVZO in combination with §21 StVZO as an "Oldtimer Special Vehicle Firefighting Equipment Vehicle" (for an H-registration/classic vehicle registration) from TÜV Rheinland dated 09/03/2026 is available. Engine oil and filter / brake fluid / 4 glow plugs / wiper blades all replaced NEW by a specialist workshop in 02/2026 with invoice. Directly from the garage, until recently always registered to the first owner, with the original registration document and even the first vehicle registration certificate from 1989. Only 21,000 total kilometers driven. Very sound Bremer Transporter T1 in the medium-length version with the robust factory-made steel high roof. Body condition in detail: Only 2 non-critical rust spots (rear right wheel arch and left side panel). Otherwise nothing. Not even at the 'typical Bremer rust spots'—these are all 'clean' on this example and have never been repaired. Only the front right wheel arch has previously been repaired. Normal signs of use are present. The underbody is also in good condition. This 308 D was explicitly sold to us by the original owner (municipality) as 'accident-free.' As-new winter tires (DOT 2022). Tall 270° rear doors and fog lights, rear axle stabilizer and reinforced shock absorbers. Otherwise, absolute base version. No seat belts. No power steering. No ABS. Pure 1980s—back when reliable, durable vehicles were still made. Here, there is little that can go wrong. Engine: OM 601 4-cylinder naturally aspirated diesel with 79 hp. 5-speed manual transmission. 127 km/h is registered as max speed. A large mechanical step deploys when opening the sliding door. The vehicle was used by the fire brigade as an equipment carrier (GW) and is fitted with several shelf installations, which can easily be removed if not required. Outfitter: Hermann Schmitz KG in 5901 Wilnsdorf near Siegen. Registered as "Other Vehicle Firefighting Vehicle". Kerb weight 2320 kg (including all installations). Gross vehicle weight – factory original, unchanged to this day – 3500 kg. This means the 308 D-KA can also be driven immediately with a modern car driving license. The special signal system (blue lights, siren) was removed by the fire brigade prior to sale and is no longer present. The vehicle runs exceptionally well; the transfer drive on the motorway was an absolute pleasure. This offer is valid only for traders or authorities. Subject to prior sale and errors. The purchase price is the final gross price (gross = net). Differential taxation according to §25a UStG applies as it is an authority vehicle. Therefore, 19% VAT is NOT added. VAT cannot be separated out from the purchase price either.

Stanje: zelo dobro (rabljeno), 1 lot of SK 50 tool holders Redpfxjuir Une Agtet (28556) approximately 65 pieces approx. 250 kg without pallet

Stanje: novo, Leto izdelave: 2015, obratovalne ure: 3.000 h, Operating hours: 3000_____Water tank 800 liters Equipped with: - 160 cm dosing unit - 60 cm lateral shift to the right - Prepared for GPS integration Optional: - Rear-view camera - 120 cm dosing unit - 500 or 1,150-liter water tank - Surface water pump (intake pipe and basket) - High-capacity side nozzles - Mounting bracket for standpipe for hydrants Mounted on implement carriers, e.g. Holder, Wille, Multihog Rjdpou Hf A Ajfx Agtst Hand lance with 15 m water hose on reel Specifications: - Daily capacity: 17,000–35,000 m²/day* - Operating speed with 100% weed coverage (min.): 0.5 km/h - Average working speed: 3–5 km/h - Operating speed with low weed coverage: min. 5 km/h - Water consumption for weed control (min.): 34 l/min - Driven via hydraulic system of carrier vehicle (min. 60 l/min at 180 bar) - 2 x high-tech burners 110 kW with at least 92% efficiency (per EN 303-2) - Burner emissions class: > EURO 6 - Automatic water softening system with 5 l canister and level monitoring - Control panel with touchscreen for system operation and monitoring inside the carrier vehicle, data storage for 5 days, and daily output export via USB stick (Excel format) - Prepared for GPS integration - Water pressure during weed control: 0.2 bar - Water temperature at the plant (weed control): 98–99.6°C - Active temperature control (software-regulated, no bypass control) for a constant water temperature of 99.6°C (+/- 0.6°C) - Burner drive: diesel or Aspen D biodiesel - Burner tank capacity: 105 l - Water tank capacity: 800 l - Standpipe holder - Reversing camera - Sensor-based dosing unit with infrared sensors, application system: 2 rows with 20 valves in 4 independent sections - Dosing unit: working width 160 cm, lateral work nozzles (2 left, 2 right), plus 2 high-performance nozzles left and right, 60 cm lateral shift to right - Stainless steel hose reel with 15-meter hose and 20 cm hand lance - Adapter and frame with support feet for mounting on carrier vehicle - Water tank (plastic) 800 liters with C-pipe connector and level indicator, dry-run protection, water filter - Standard color: RAL 9006 - Weight heating unit (net): 560 kg (without water and fuel) - Machine dimensions (LxWxH): 3,500 x 1,750 x 1,600 mm - Dosing unit weight: 340 kg Location: n/a

Stanje: novo, prevoženi kilometri: 70 km, moč: 110 kW (149,56 KM), skupna masa: 6.000 kg, vrsta goriva: dizel, barva: bela, skupna širina: 1.860 mm, skupna višina: 2.150 mm, število sedežev: 3, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, The ISUZU ? Commercial Vehicle Center in Germany, with expertise, service, and consultation, offers you: ISUZU M29 F MT Chassis Net price / export price: from €42,879 2-year warranty on the base vehicle from the date of first registration Standard equipment: - 3.0 L turbo diesel with common rail injection system and VGS turbo, 110 kW / 150 HP, EURO VI OBD-E (max. torque 375 Nm at 1,280 – 2,800 rpm) - Particulate filter system with DPD system and AdBlue (the self-cleaning system enables filter regeneration without a workshop visit, thanks to the new DPD regeneration technology which indicates when regeneration is needed. Simply press the DPD button and in 20 minutes the system cleans itself) - 6-speed manual transmission or 9-speed dual clutch transmission “ISIM” with torque converter - Leaf suspension front axle (max. 2,300 kg), leaf suspension rear axle (max. 3,980 kg), front stabilizer bar - Tyres 205 / 75 R16 C, single tyres at the front - Twin tyres on the driven rear axle, spare wheel - Ventilated disc brakes front and rear - speed limiter (90 km/h) - Engine brake - 24 V onboard power supply, 90A alternator, 2x70 Ah batteries - Diesel tank 70 l / AdBlue tank 14 l - New, modern cab with excellent space utilization, generous headroom and substantial knee clearance, outstanding ergonomics and visibility, low entrance height - For optimal visibility at night, Bi-LED headlights with headlamp cleaning system - Double door seals further reduce noise transfer into the cabin, supporting pleasant acoustic comfort. - Cigarette lighter, cup holders, storage compartments in the door panels and headliner, armrests in door panels - Cab paint: Arc White 729 - Vehicle dimensions: Cab width 1,815 mm, rear axle width 1,860 mm, height 2,150 mm (top of cab), chassis height 740 mm, chassis width 700 mm - Suspension seat for driver - Dual passenger bench, 3 seats, head restraints, seat belt warning - Driver and passenger airbag, seat belt pretensioners for driver and passenger - Height- and tilt-adjustable steering wheel, multifunction steering wheel, interior mirror - Electric windows - Electrically adjustable and heated exterior mirrors - Electronic immobilizer - DAB+ radio with Bluetooth – hands-free system, USB charging port - 7" driver information display - Fog lights, LED daytime running lights, automatic lighting, LED rear lights - Reversing warning signal - Central locking with remote control - Digital EU control device - Air conditioning Safety Pack 2 features: - ABS: Anti-lock braking system - ASR: Traction control for rear axle - EBD: Electronic brake-force distribution - EVSC: Electronic stability control - LDWS: Lane departure warning system - MOIS: Moving object detection - DWS: Distance warning system - MAM: Emergency braking for obstacles Rsdpfxjwh D Nrs Agtet - FVSN: Forward detection system - DDAW: Driver drowsiness detection system - TSR: Traffic sign recognition - TPMS: Tyre pressure monitoring system - RM: Reversing camera with monitor - AEBS: Autonomous emergency braking system - AEBS: Autonomous emergency braking system for pedestrians and cyclists - Intersection warning: Collision warning system for intersections - Intersection AEBS: Autonomous emergency braking at intersections - BSIS: Blind spot monitoring system Including delivery costs Bodywork: On request, we will be happy to provide you with a quotation for your individual bodywork requirements. *Subject to errors, changes, and interim sale. Our general terms and conditions apply. *All

Stanje: zelo dobro (rabljeno), Profesionalni vrtalni držalo priznane blagovne znamke GEWEFA – nemška kakovost in natančnost izdelave. Namenjeno za vpenjanje svedrov in obdelovalnih orodij v CNC rezkalnih strojih, obdelovalnih centrih ter klasičnih strojih s pritrditvijo SK40 DIN 69871. 📌 Tehnične specifikacije: . Proizvajalec: GEWEFA – Made in Germany . Tip: SK40 × Ø1–16 mm . Kataloška številka: 28.05.046.001 / 28.05.046.002 . Stožec: SK40 DIN 69871 AD/B . Objemni razpon: Ø1 – 13 mm . Leto proizvodnje: 2007 . Stanje: rabljeno, zelo dobro – popolnoma tehnično brezhibno ✅ Prednosti: . Natančna izdelava – visoka koncentracija in stabilnost orodja . Originalni izdelek iz Nemčije – ne kitajska kopija . Idealno za serijsko proizvodnjo in precizno obdelavo . Pripravljen za takojšnjo uporabo Redpfxsxizbfj Agtet Cena navedena za 1 kos.

Stanje: zelo dobro (rabljeno), Prodajam komplet profesionalnih orodnih držal SK40 AD/B 6×80 po DIN 69871 standardu. Držala so v dobrem tehničnem stanju, popolna – delno z nameščenimi VHM/HSS svedri različnih premerov. Premer vpenjanja: Ø6 mm Dolžina: 80 mm Tip vpetja: SK40, standard DIN 69871 AD/B Stanje: rabljeno, delujoče, vidne sledi uporabe (obarvanost zaradi temperature). Idealno za CNC obdelovalne centre, rezkarje in precizne vrtalnike. Rjdpfsxcx Uvsx Agtst

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni nosilec orodja GARANT SK40-6-50 za natančno vpenjanje orodij Ø6 mm. Izdelek priznane blagovne znamke Hoffmann Group / Garant – Nemčija, uporabljen v CNC obdelovalnih centrih. • Tip vpenjanja: SK40 (DIN 69871) • Velikost: Ø6 mm • Dolžina: 50 mm • Kataloška številka: 300210.6 • Uravnoteženje: G2.5 do 25.000 obr/min • Visoka natančnost, stabilno vpenjanje • Idealno za VHM rezkarje in svedre ter precizna orodja • Zelo dobro stanje – preverjeno, pripravljeno za delo. Nosilci GARANT so najvišji razred v vpenjalni tehniki – jamstvo za kakovost in trajnost. -- CENA NAVEDENA ZA 1 KOS -- Rsdpfx Aew Syzwogtot

Stanje: zelo dobro (rabljeno), Na prodajo profesionalen držalo orodja SK40 priznane znamke FAT (Fabryka Automatów Tokarskich). Model: 40.300.10 – Ø10×50. Držalo je v zelo dobrem tehničnem stanju, pripravljeno na uporabo. V kompletu je nameščeno orodje (sveder ali rezkar – vidno na fotografijah). - Tip vpetja: SK40 - Tulec: Ø10 mm - Dolžina vpenjanja: 50 mm - Proizvajalec: FAT / FATool - Stanje: rabljeno, delujoče, pripravljeno za uporabo Obveščam, da je na voljo več kosov, vsi v enaki dimenziji Ø10×50. Rjdpfexcg Hyjx Agtet